linux/drivers/misc/sgi-xp/xpc_main.c
<<
>>
Prefs
   1/*
   2 * This file is subject to the terms and conditions of the GNU General Public
   3 * License.  See the file "COPYING" in the main directory of this archive
   4 * for more details.
   5 *
   6 * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
   7 */
   8
   9/*
  10 * Cross Partition Communication (XPC) support - standard version.
  11 *
  12 *      XPC provides a message passing capability that crosses partition
  13 *      boundaries. This module is made up of two parts:
  14 *
  15 *          partition   This part detects the presence/absence of other
  16 *                      partitions. It provides a heartbeat and monitors
  17 *                      the heartbeats of other partitions.
  18 *
  19 *          channel     This part manages the channels and sends/receives
  20 *                      messages across them to/from other partitions.
  21 *
  22 *      There are a couple of additional functions residing in XP, which
  23 *      provide an interface to XPC for its users.
  24 *
  25 *
  26 *      Caveats:
  27 *
  28 *        . Currently on sn2, we have no way to determine which nasid an IRQ
  29 *          came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
  30 *          followed by an IPI. The amo indicates where data is to be pulled
  31 *          from, so after the IPI arrives, the remote partition checks the amo
  32 *          word. The IPI can actually arrive before the amo however, so other
  33 *          code must periodically check for this case. Also, remote amo
  34 *          operations do not reliably time out. Thus we do a remote PIO read
  35 *          solely to know whether the remote partition is down and whether we
  36 *          should stop sending IPIs to it. This remote PIO read operation is
  37 *          set up in a special nofault region so SAL knows to ignore (and
  38 *          cleanup) any errors due to the remote amo write, PIO read, and/or
  39 *          PIO write operations.
  40 *
  41 *          If/when new hardware solves this IPI problem, we should abandon
  42 *          the current approach.
  43 *
  44 */
  45
  46#include <linux/module.h>
  47#include <linux/slab.h>
  48#include <linux/sysctl.h>
  49#include <linux/device.h>
  50#include <linux/delay.h>
  51#include <linux/reboot.h>
  52#include <linux/kdebug.h>
  53#include <linux/kthread.h>
  54#include "xpc.h"
  55
  56#ifdef CONFIG_X86_64
  57#include <asm/traps.h>
  58#endif
  59
  60/* define two XPC debug device structures to be used with dev_dbg() et al */
  61
  62struct device_driver xpc_dbg_name = {
  63        .name = "xpc"
  64};
  65
  66struct device xpc_part_dbg_subname = {
  67        .init_name = "",        /* set to "part" at xpc_init() time */
  68        .driver = &xpc_dbg_name
  69};
  70
  71struct device xpc_chan_dbg_subname = {
  72        .init_name = "",        /* set to "chan" at xpc_init() time */
  73        .driver = &xpc_dbg_name
  74};
  75
  76struct device *xpc_part = &xpc_part_dbg_subname;
  77struct device *xpc_chan = &xpc_chan_dbg_subname;
  78
  79static int xpc_kdebug_ignore;
  80
  81/* systune related variables for /proc/sys directories */
  82
  83static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
  84static int xpc_hb_min_interval = 1;
  85static int xpc_hb_max_interval = 10;
  86
  87static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
  88static int xpc_hb_check_min_interval = 10;
  89static int xpc_hb_check_max_interval = 120;
  90
  91int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
  92static int xpc_disengage_min_timelimit; /* = 0 */
  93static int xpc_disengage_max_timelimit = 120;
  94
  95static struct ctl_table xpc_sys_xpc_hb_dir[] = {
  96        {
  97         .procname = "hb_interval",
  98         .data = &xpc_hb_interval,
  99         .maxlen = sizeof(int),
 100         .mode = 0644,
 101         .proc_handler = proc_dointvec_minmax,
 102         .extra1 = &xpc_hb_min_interval,
 103         .extra2 = &xpc_hb_max_interval},
 104        {
 105         .procname = "hb_check_interval",
 106         .data = &xpc_hb_check_interval,
 107         .maxlen = sizeof(int),
 108         .mode = 0644,
 109         .proc_handler = proc_dointvec_minmax,
 110         .extra1 = &xpc_hb_check_min_interval,
 111         .extra2 = &xpc_hb_check_max_interval},
 112        {}
 113};
 114static struct ctl_table xpc_sys_xpc_dir[] = {
 115        {
 116         .procname = "hb",
 117         .mode = 0555,
 118         .child = xpc_sys_xpc_hb_dir},
 119        {
 120         .procname = "disengage_timelimit",
 121         .data = &xpc_disengage_timelimit,
 122         .maxlen = sizeof(int),
 123         .mode = 0644,
 124         .proc_handler = proc_dointvec_minmax,
 125         .extra1 = &xpc_disengage_min_timelimit,
 126         .extra2 = &xpc_disengage_max_timelimit},
 127        {}
 128};
 129static struct ctl_table xpc_sys_dir[] = {
 130        {
 131         .procname = "xpc",
 132         .mode = 0555,
 133         .child = xpc_sys_xpc_dir},
 134        {}
 135};
 136static struct ctl_table_header *xpc_sysctl;
 137
 138/* non-zero if any remote partition disengage was timed out */
 139int xpc_disengage_timedout;
 140
 141/* #of activate IRQs received and not yet processed */
 142int xpc_activate_IRQ_rcvd;
 143DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 144
 145/* IRQ handler notifies this wait queue on receipt of an IRQ */
 146DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 147
 148static unsigned long xpc_hb_check_timeout;
 149static struct timer_list xpc_hb_timer;
 150
 151/* notification that the xpc_hb_checker thread has exited */
 152static DECLARE_COMPLETION(xpc_hb_checker_exited);
 153
 154/* notification that the xpc_discovery thread has exited */
 155static DECLARE_COMPLETION(xpc_discovery_exited);
 156
 157static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 158
 159static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
 160static struct notifier_block xpc_reboot_notifier = {
 161        .notifier_call = xpc_system_reboot,
 162};
 163
 164static int xpc_system_die(struct notifier_block *, unsigned long, void *);
 165static struct notifier_block xpc_die_notifier = {
 166        .notifier_call = xpc_system_die,
 167};
 168
 169struct xpc_arch_operations xpc_arch_ops;
 170
 171/*
 172 * Timer function to enforce the timelimit on the partition disengage.
 173 */
 174static void
 175xpc_timeout_partition_disengage(struct timer_list *t)
 176{
 177        struct xpc_partition *part = from_timer(part, t, disengage_timer);
 178
 179        DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 180
 181        (void)xpc_partition_disengaged(part);
 182
 183        DBUG_ON(part->disengage_timeout != 0);
 184        DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
 185}
 186
 187/*
 188 * Timer to produce the heartbeat.  The timer structures function is
 189 * already set when this is initially called.  A tunable is used to
 190 * specify when the next timeout should occur.
 191 */
 192static void
 193xpc_hb_beater(struct timer_list *unused)
 194{
 195        xpc_arch_ops.increment_heartbeat();
 196
 197        if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
 198                wake_up_interruptible(&xpc_activate_IRQ_wq);
 199
 200        xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 201        add_timer(&xpc_hb_timer);
 202}
 203
 204static void
 205xpc_start_hb_beater(void)
 206{
 207        xpc_arch_ops.heartbeat_init();
 208        timer_setup(&xpc_hb_timer, xpc_hb_beater, 0);
 209        xpc_hb_beater(0);
 210}
 211
 212static void
 213xpc_stop_hb_beater(void)
 214{
 215        del_timer_sync(&xpc_hb_timer);
 216        xpc_arch_ops.heartbeat_exit();
 217}
 218
 219/*
 220 * At periodic intervals, scan through all active partitions and ensure
 221 * their heartbeat is still active.  If not, the partition is deactivated.
 222 */
 223static void
 224xpc_check_remote_hb(void)
 225{
 226        struct xpc_partition *part;
 227        short partid;
 228        enum xp_retval ret;
 229
 230        for (partid = 0; partid < xp_max_npartitions; partid++) {
 231
 232                if (xpc_exiting)
 233                        break;
 234
 235                if (partid == xp_partition_id)
 236                        continue;
 237
 238                part = &xpc_partitions[partid];
 239
 240                if (part->act_state == XPC_P_AS_INACTIVE ||
 241                    part->act_state == XPC_P_AS_DEACTIVATING) {
 242                        continue;
 243                }
 244
 245                ret = xpc_arch_ops.get_remote_heartbeat(part);
 246                if (ret != xpSuccess)
 247                        XPC_DEACTIVATE_PARTITION(part, ret);
 248        }
 249}
 250
 251/*
 252 * This thread is responsible for nearly all of the partition
 253 * activation/deactivation.
 254 */
 255static int
 256xpc_hb_checker(void *ignore)
 257{
 258        int force_IRQ = 0;
 259
 260        /* this thread was marked active by xpc_hb_init() */
 261
 262        set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU));
 263
 264        /* set our heartbeating to other partitions into motion */
 265        xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
 266        xpc_start_hb_beater();
 267
 268        while (!xpc_exiting) {
 269
 270                dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 271                        "been received\n",
 272                        (int)(xpc_hb_check_timeout - jiffies),
 273                        xpc_activate_IRQ_rcvd);
 274
 275                /* checking of remote heartbeats is skewed by IRQ handling */
 276                if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
 277                        xpc_hb_check_timeout = jiffies +
 278                            (xpc_hb_check_interval * HZ);
 279
 280                        dev_dbg(xpc_part, "checking remote heartbeats\n");
 281                        xpc_check_remote_hb();
 282                }
 283
 284                /* check for outstanding IRQs */
 285                if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
 286                        force_IRQ = 0;
 287                        dev_dbg(xpc_part, "processing activate IRQs "
 288                                "received\n");
 289                        xpc_arch_ops.process_activate_IRQ_rcvd();
 290                }
 291
 292                /* wait for IRQ or timeout */
 293                (void)wait_event_interruptible(xpc_activate_IRQ_wq,
 294                                               (time_is_before_eq_jiffies(
 295                                                xpc_hb_check_timeout) ||
 296                                                xpc_activate_IRQ_rcvd > 0 ||
 297                                                xpc_exiting));
 298        }
 299
 300        xpc_stop_hb_beater();
 301
 302        dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 303
 304        /* mark this thread as having exited */
 305        complete(&xpc_hb_checker_exited);
 306        return 0;
 307}
 308
 309/*
 310 * This thread will attempt to discover other partitions to activate
 311 * based on info provided by SAL. This new thread is short lived and
 312 * will exit once discovery is complete.
 313 */
 314static int
 315xpc_initiate_discovery(void *ignore)
 316{
 317        xpc_discovery();
 318
 319        dev_dbg(xpc_part, "discovery thread is exiting\n");
 320
 321        /* mark this thread as having exited */
 322        complete(&xpc_discovery_exited);
 323        return 0;
 324}
 325
 326/*
 327 * The first kthread assigned to a newly activated partition is the one
 328 * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
 329 * that kthread until the partition is brought down, at which time that kthread
 330 * returns back to XPC HB. (The return of that kthread will signify to XPC HB
 331 * that XPC has dismantled all communication infrastructure for the associated
 332 * partition.) This kthread becomes the channel manager for that partition.
 333 *
 334 * Each active partition has a channel manager, who, besides connecting and
 335 * disconnecting channels, will ensure that each of the partition's connected
 336 * channels has the required number of assigned kthreads to get the work done.
 337 */
 338static void
 339xpc_channel_mgr(struct xpc_partition *part)
 340{
 341        while (part->act_state != XPC_P_AS_DEACTIVATING ||
 342               atomic_read(&part->nchannels_active) > 0 ||
 343               !xpc_partition_disengaged(part)) {
 344
 345                xpc_process_sent_chctl_flags(part);
 346
 347                /*
 348                 * Wait until we've been requested to activate kthreads or
 349                 * all of the channel's message queues have been torn down or
 350                 * a signal is pending.
 351                 *
 352                 * The channel_mgr_requests is set to 1 after being awakened,
 353                 * This is done to prevent the channel mgr from making one pass
 354                 * through the loop for each request, since he will
 355                 * be servicing all the requests in one pass. The reason it's
 356                 * set to 1 instead of 0 is so that other kthreads will know
 357                 * that the channel mgr is running and won't bother trying to
 358                 * wake him up.
 359                 */
 360                atomic_dec(&part->channel_mgr_requests);
 361                (void)wait_event_interruptible(part->channel_mgr_wq,
 362                                (atomic_read(&part->channel_mgr_requests) > 0 ||
 363                                 part->chctl.all_flags != 0 ||
 364                                 (part->act_state == XPC_P_AS_DEACTIVATING &&
 365                                 atomic_read(&part->nchannels_active) == 0 &&
 366                                 xpc_partition_disengaged(part))));
 367                atomic_set(&part->channel_mgr_requests, 1);
 368        }
 369}
 370
 371/*
 372 * Guarantee that the kzalloc'd memory is cacheline aligned.
 373 */
 374void *
 375xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 376{
 377        /* see if kzalloc will give us cachline aligned memory by default */
 378        *base = kzalloc(size, flags);
 379        if (*base == NULL)
 380                return NULL;
 381
 382        if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
 383                return *base;
 384
 385        kfree(*base);
 386
 387        /* nope, we'll have to do it ourselves */
 388        *base = kzalloc(size + L1_CACHE_BYTES, flags);
 389        if (*base == NULL)
 390                return NULL;
 391
 392        return (void *)L1_CACHE_ALIGN((u64)*base);
 393}
 394
 395/*
 396 * Setup the channel structures necessary to support XPartition Communication
 397 * between the specified remote partition and the local one.
 398 */
 399static enum xp_retval
 400xpc_setup_ch_structures(struct xpc_partition *part)
 401{
 402        enum xp_retval ret;
 403        int ch_number;
 404        struct xpc_channel *ch;
 405        short partid = XPC_PARTID(part);
 406
 407        /*
 408         * Allocate all of the channel structures as a contiguous chunk of
 409         * memory.
 410         */
 411        DBUG_ON(part->channels != NULL);
 412        part->channels = kcalloc(XPC_MAX_NCHANNELS,
 413                                 sizeof(struct xpc_channel),
 414                                 GFP_KERNEL);
 415        if (part->channels == NULL) {
 416                dev_err(xpc_chan, "can't get memory for channels\n");
 417                return xpNoMemory;
 418        }
 419
 420        /* allocate the remote open and close args */
 421
 422        part->remote_openclose_args =
 423            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
 424                                          GFP_KERNEL, &part->
 425                                          remote_openclose_args_base);
 426        if (part->remote_openclose_args == NULL) {
 427                dev_err(xpc_chan, "can't get memory for remote connect args\n");
 428                ret = xpNoMemory;
 429                goto out_1;
 430        }
 431
 432        part->chctl.all_flags = 0;
 433        spin_lock_init(&part->chctl_lock);
 434
 435        atomic_set(&part->channel_mgr_requests, 1);
 436        init_waitqueue_head(&part->channel_mgr_wq);
 437
 438        part->nchannels = XPC_MAX_NCHANNELS;
 439
 440        atomic_set(&part->nchannels_active, 0);
 441        atomic_set(&part->nchannels_engaged, 0);
 442
 443        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
 444                ch = &part->channels[ch_number];
 445
 446                ch->partid = partid;
 447                ch->number = ch_number;
 448                ch->flags = XPC_C_DISCONNECTED;
 449
 450                atomic_set(&ch->kthreads_assigned, 0);
 451                atomic_set(&ch->kthreads_idle, 0);
 452                atomic_set(&ch->kthreads_active, 0);
 453
 454                atomic_set(&ch->references, 0);
 455                atomic_set(&ch->n_to_notify, 0);
 456
 457                spin_lock_init(&ch->lock);
 458                init_completion(&ch->wdisconnect_wait);
 459
 460                atomic_set(&ch->n_on_msg_allocate_wq, 0);
 461                init_waitqueue_head(&ch->msg_allocate_wq);
 462                init_waitqueue_head(&ch->idle_wq);
 463        }
 464
 465        ret = xpc_arch_ops.setup_ch_structures(part);
 466        if (ret != xpSuccess)
 467                goto out_2;
 468
 469        /*
 470         * With the setting of the partition setup_state to XPC_P_SS_SETUP,
 471         * we're declaring that this partition is ready to go.
 472         */
 473        part->setup_state = XPC_P_SS_SETUP;
 474
 475        return xpSuccess;
 476
 477        /* setup of ch structures failed */
 478out_2:
 479        kfree(part->remote_openclose_args_base);
 480        part->remote_openclose_args = NULL;
 481out_1:
 482        kfree(part->channels);
 483        part->channels = NULL;
 484        return ret;
 485}
 486
 487/*
 488 * Teardown the channel structures necessary to support XPartition Communication
 489 * between the specified remote partition and the local one.
 490 */
 491static void
 492xpc_teardown_ch_structures(struct xpc_partition *part)
 493{
 494        DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
 495        DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 496
 497        /*
 498         * Make this partition inaccessible to local processes by marking it
 499         * as no longer setup. Then wait before proceeding with the teardown
 500         * until all existing references cease.
 501         */
 502        DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
 503        part->setup_state = XPC_P_SS_WTEARDOWN;
 504
 505        wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 506
 507        /* now we can begin tearing down the infrastructure */
 508
 509        xpc_arch_ops.teardown_ch_structures(part);
 510
 511        kfree(part->remote_openclose_args_base);
 512        part->remote_openclose_args = NULL;
 513        kfree(part->channels);
 514        part->channels = NULL;
 515
 516        part->setup_state = XPC_P_SS_TORNDOWN;
 517}
 518
 519/*
 520 * When XPC HB determines that a partition has come up, it will create a new
 521 * kthread and that kthread will call this function to attempt to set up the
 522 * basic infrastructure used for Cross Partition Communication with the newly
 523 * upped partition.
 524 *
 525 * The kthread that was created by XPC HB and which setup the XPC
 526 * infrastructure will remain assigned to the partition becoming the channel
 527 * manager for that partition until the partition is deactivating, at which
 528 * time the kthread will teardown the XPC infrastructure and then exit.
 529 */
 530static int
 531xpc_activating(void *__partid)
 532{
 533        short partid = (u64)__partid;
 534        struct xpc_partition *part = &xpc_partitions[partid];
 535        unsigned long irq_flags;
 536
 537        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 538
 539        spin_lock_irqsave(&part->act_lock, irq_flags);
 540
 541        if (part->act_state == XPC_P_AS_DEACTIVATING) {
 542                part->act_state = XPC_P_AS_INACTIVE;
 543                spin_unlock_irqrestore(&part->act_lock, irq_flags);
 544                part->remote_rp_pa = 0;
 545                return 0;
 546        }
 547
 548        /* indicate the thread is activating */
 549        DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
 550        part->act_state = XPC_P_AS_ACTIVATING;
 551
 552        XPC_SET_REASON(part, 0, 0);
 553        spin_unlock_irqrestore(&part->act_lock, irq_flags);
 554
 555        dev_dbg(xpc_part, "activating partition %d\n", partid);
 556
 557        xpc_arch_ops.allow_hb(partid);
 558
 559        if (xpc_setup_ch_structures(part) == xpSuccess) {
 560                (void)xpc_part_ref(part);       /* this will always succeed */
 561
 562                if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
 563                        xpc_mark_partition_active(part);
 564                        xpc_channel_mgr(part);
 565                        /* won't return until partition is deactivating */
 566                }
 567
 568                xpc_part_deref(part);
 569                xpc_teardown_ch_structures(part);
 570        }
 571
 572        xpc_arch_ops.disallow_hb(partid);
 573        xpc_mark_partition_inactive(part);
 574
 575        if (part->reason == xpReactivating) {
 576                /* interrupting ourselves results in activating partition */
 577                xpc_arch_ops.request_partition_reactivation(part);
 578        }
 579
 580        return 0;
 581}
 582
 583void
 584xpc_activate_partition(struct xpc_partition *part)
 585{
 586        short partid = XPC_PARTID(part);
 587        unsigned long irq_flags;
 588        struct task_struct *kthread;
 589
 590        spin_lock_irqsave(&part->act_lock, irq_flags);
 591
 592        DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 593
 594        part->act_state = XPC_P_AS_ACTIVATION_REQ;
 595        XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 596
 597        spin_unlock_irqrestore(&part->act_lock, irq_flags);
 598
 599        kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d",
 600                              partid);
 601        if (IS_ERR(kthread)) {
 602                spin_lock_irqsave(&part->act_lock, irq_flags);
 603                part->act_state = XPC_P_AS_INACTIVE;
 604                XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
 605                spin_unlock_irqrestore(&part->act_lock, irq_flags);
 606        }
 607}
 608
 609void
 610xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 611{
 612        int idle = atomic_read(&ch->kthreads_idle);
 613        int assigned = atomic_read(&ch->kthreads_assigned);
 614        int wakeup;
 615
 616        DBUG_ON(needed <= 0);
 617
 618        if (idle > 0) {
 619                wakeup = (needed > idle) ? idle : needed;
 620                needed -= wakeup;
 621
 622                dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, "
 623                        "channel=%d\n", wakeup, ch->partid, ch->number);
 624
 625                /* only wakeup the requested number of kthreads */
 626                wake_up_nr(&ch->idle_wq, wakeup);
 627        }
 628
 629        if (needed <= 0)
 630                return;
 631
 632        if (needed + assigned > ch->kthreads_assigned_limit) {
 633                needed = ch->kthreads_assigned_limit - assigned;
 634                if (needed <= 0)
 635                        return;
 636        }
 637
 638        dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
 639                needed, ch->partid, ch->number);
 640
 641        xpc_create_kthreads(ch, needed, 0);
 642}
 643
 644/*
 645 * This function is where XPC's kthreads wait for messages to deliver.
 646 */
 647static void
 648xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 649{
 650        int (*n_of_deliverable_payloads) (struct xpc_channel *) =
 651                xpc_arch_ops.n_of_deliverable_payloads;
 652
 653        do {
 654                /* deliver messages to their intended recipients */
 655
 656                while (n_of_deliverable_payloads(ch) > 0 &&
 657                       !(ch->flags & XPC_C_DISCONNECTING)) {
 658                        xpc_deliver_payload(ch);
 659                }
 660
 661                if (atomic_inc_return(&ch->kthreads_idle) >
 662                    ch->kthreads_idle_limit) {
 663                        /* too many idle kthreads on this channel */
 664                        atomic_dec(&ch->kthreads_idle);
 665                        break;
 666                }
 667
 668                dev_dbg(xpc_chan, "idle kthread calling "
 669                        "wait_event_interruptible_exclusive()\n");
 670
 671                (void)wait_event_interruptible_exclusive(ch->idle_wq,
 672                                (n_of_deliverable_payloads(ch) > 0 ||
 673                                 (ch->flags & XPC_C_DISCONNECTING)));
 674
 675                atomic_dec(&ch->kthreads_idle);
 676
 677        } while (!(ch->flags & XPC_C_DISCONNECTING));
 678}
 679
 680static int
 681xpc_kthread_start(void *args)
 682{
 683        short partid = XPC_UNPACK_ARG1(args);
 684        u16 ch_number = XPC_UNPACK_ARG2(args);
 685        struct xpc_partition *part = &xpc_partitions[partid];
 686        struct xpc_channel *ch;
 687        int n_needed;
 688        unsigned long irq_flags;
 689        int (*n_of_deliverable_payloads) (struct xpc_channel *) =
 690                xpc_arch_ops.n_of_deliverable_payloads;
 691
 692        dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
 693                partid, ch_number);
 694
 695        ch = &part->channels[ch_number];
 696
 697        if (!(ch->flags & XPC_C_DISCONNECTING)) {
 698
 699                /* let registerer know that connection has been established */
 700
 701                spin_lock_irqsave(&ch->lock, irq_flags);
 702                if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
 703                        ch->flags |= XPC_C_CONNECTEDCALLOUT;
 704                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 705
 706                        xpc_connected_callout(ch);
 707
 708                        spin_lock_irqsave(&ch->lock, irq_flags);
 709                        ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
 710                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 711
 712                        /*
 713                         * It is possible that while the callout was being
 714                         * made that the remote partition sent some messages.
 715                         * If that is the case, we may need to activate
 716                         * additional kthreads to help deliver them. We only
 717                         * need one less than total #of messages to deliver.
 718                         */
 719                        n_needed = n_of_deliverable_payloads(ch) - 1;
 720                        if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 721                                xpc_activate_kthreads(ch, n_needed);
 722
 723                } else {
 724                        spin_unlock_irqrestore(&ch->lock, irq_flags);
 725                }
 726
 727                xpc_kthread_waitmsgs(part, ch);
 728        }
 729
 730        /* let registerer know that connection is disconnecting */
 731
 732        spin_lock_irqsave(&ch->lock, irq_flags);
 733        if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 734            !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
 735                ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
 736                spin_unlock_irqrestore(&ch->lock, irq_flags);
 737
 738                xpc_disconnect_callout(ch, xpDisconnecting);
 739
 740                spin_lock_irqsave(&ch->lock, irq_flags);
 741                ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
 742        }
 743        spin_unlock_irqrestore(&ch->lock, irq_flags);
 744
 745        if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 746            atomic_dec_return(&part->nchannels_engaged) == 0) {
 747                xpc_arch_ops.indicate_partition_disengaged(part);
 748        }
 749
 750        xpc_msgqueue_deref(ch);
 751
 752        dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
 753                partid, ch_number);
 754
 755        xpc_part_deref(part);
 756        return 0;
 757}
 758
 759/*
 760 * For each partition that XPC has established communications with, there is
 761 * a minimum of one kernel thread assigned to perform any operation that
 762 * may potentially sleep or block (basically the callouts to the asynchronous
 763 * functions registered via xpc_connect()).
 764 *
 765 * Additional kthreads are created and destroyed by XPC as the workload
 766 * demands.
 767 *
 768 * A kthread is assigned to one of the active channels that exists for a given
 769 * partition.
 770 */
 771void
 772xpc_create_kthreads(struct xpc_channel *ch, int needed,
 773                    int ignore_disconnecting)
 774{
 775        unsigned long irq_flags;
 776        u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
 777        struct xpc_partition *part = &xpc_partitions[ch->partid];
 778        struct task_struct *kthread;
 779        void (*indicate_partition_disengaged) (struct xpc_partition *) =
 780                xpc_arch_ops.indicate_partition_disengaged;
 781
 782        while (needed-- > 0) {
 783
 784                /*
 785                 * The following is done on behalf of the newly created
 786                 * kthread. That kthread is responsible for doing the
 787                 * counterpart to the following before it exits.
 788                 */
 789                if (ignore_disconnecting) {
 790                        if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
 791                                /* kthreads assigned had gone to zero */
 792                                BUG_ON(!(ch->flags &
 793                                         XPC_C_DISCONNECTINGCALLOUT_MADE));
 794                                break;
 795                        }
 796
 797                } else if (ch->flags & XPC_C_DISCONNECTING) {
 798                        break;
 799
 800                } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
 801                           atomic_inc_return(&part->nchannels_engaged) == 1) {
 802                        xpc_arch_ops.indicate_partition_engaged(part);
 803                }
 804                (void)xpc_part_ref(part);
 805                xpc_msgqueue_ref(ch);
 806
 807                kthread = kthread_run(xpc_kthread_start, (void *)args,
 808                                      "xpc%02dc%d", ch->partid, ch->number);
 809                if (IS_ERR(kthread)) {
 810                        /* the fork failed */
 811
 812                        /*
 813                         * NOTE: if (ignore_disconnecting &&
 814                         * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
 815                         * then we'll deadlock if all other kthreads assigned
 816                         * to this channel are blocked in the channel's
 817                         * registerer, because the only thing that will unblock
 818                         * them is the xpDisconnecting callout that this
 819                         * failed kthread_run() would have made.
 820                         */
 821
 822                        if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 823                            atomic_dec_return(&part->nchannels_engaged) == 0) {
 824                                indicate_partition_disengaged(part);
 825                        }
 826                        xpc_msgqueue_deref(ch);
 827                        xpc_part_deref(part);
 828
 829                        if (atomic_read(&ch->kthreads_assigned) <
 830                            ch->kthreads_idle_limit) {
 831                                /*
 832                                 * Flag this as an error only if we have an
 833                                 * insufficient #of kthreads for the channel
 834                                 * to function.
 835                                 */
 836                                spin_lock_irqsave(&ch->lock, irq_flags);
 837                                XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
 838                                                       &irq_flags);
 839                                spin_unlock_irqrestore(&ch->lock, irq_flags);
 840                        }
 841                        break;
 842                }
 843        }
 844}
 845
 846void
 847xpc_disconnect_wait(int ch_number)
 848{
 849        unsigned long irq_flags;
 850        short partid;
 851        struct xpc_partition *part;
 852        struct xpc_channel *ch;
 853        int wakeup_channel_mgr;
 854
 855        /* now wait for all callouts to the caller's function to cease */
 856        for (partid = 0; partid < xp_max_npartitions; partid++) {
 857                part = &xpc_partitions[partid];
 858
 859                if (!xpc_part_ref(part))
 860                        continue;
 861
 862                ch = &part->channels[ch_number];
 863
 864                if (!(ch->flags & XPC_C_WDISCONNECT)) {
 865                        xpc_part_deref(part);
 866                        continue;
 867                }
 868
 869                wait_for_completion(&ch->wdisconnect_wait);
 870
 871                spin_lock_irqsave(&ch->lock, irq_flags);
 872                DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 873                wakeup_channel_mgr = 0;
 874
 875                if (ch->delayed_chctl_flags) {
 876                        if (part->act_state != XPC_P_AS_DEACTIVATING) {
 877                                spin_lock(&part->chctl_lock);
 878                                part->chctl.flags[ch->number] |=
 879                                    ch->delayed_chctl_flags;
 880                                spin_unlock(&part->chctl_lock);
 881                                wakeup_channel_mgr = 1;
 882                        }
 883                        ch->delayed_chctl_flags = 0;
 884                }
 885
 886                ch->flags &= ~XPC_C_WDISCONNECT;
 887                spin_unlock_irqrestore(&ch->lock, irq_flags);
 888
 889                if (wakeup_channel_mgr)
 890                        xpc_wakeup_channel_mgr(part);
 891
 892                xpc_part_deref(part);
 893        }
 894}
 895
 896static int
 897xpc_setup_partitions(void)
 898{
 899        short partid;
 900        struct xpc_partition *part;
 901
 902        xpc_partitions = kcalloc(xp_max_npartitions,
 903                                 sizeof(struct xpc_partition),
 904                                 GFP_KERNEL);
 905        if (xpc_partitions == NULL) {
 906                dev_err(xpc_part, "can't get memory for partition structure\n");
 907                return -ENOMEM;
 908        }
 909
 910        /*
 911         * The first few fields of each entry of xpc_partitions[] need to
 912         * be initialized now so that calls to xpc_connect() and
 913         * xpc_disconnect() can be made prior to the activation of any remote
 914         * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
 915         * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
 916         * PARTITION HAS BEEN ACTIVATED.
 917         */
 918        for (partid = 0; partid < xp_max_npartitions; partid++) {
 919                part = &xpc_partitions[partid];
 920
 921                DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
 922
 923                part->activate_IRQ_rcvd = 0;
 924                spin_lock_init(&part->act_lock);
 925                part->act_state = XPC_P_AS_INACTIVE;
 926                XPC_SET_REASON(part, 0, 0);
 927
 928                timer_setup(&part->disengage_timer,
 929                            xpc_timeout_partition_disengage, 0);
 930
 931                part->setup_state = XPC_P_SS_UNSET;
 932                init_waitqueue_head(&part->teardown_wq);
 933                atomic_set(&part->references, 0);
 934        }
 935
 936        return xpc_arch_ops.setup_partitions();
 937}
 938
 939static void
 940xpc_teardown_partitions(void)
 941{
 942        xpc_arch_ops.teardown_partitions();
 943        kfree(xpc_partitions);
 944}
 945
 946static void
 947xpc_do_exit(enum xp_retval reason)
 948{
 949        short partid;
 950        int active_part_count, printed_waiting_msg = 0;
 951        struct xpc_partition *part;
 952        unsigned long printmsg_time, disengage_timeout = 0;
 953
 954        /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 955        DBUG_ON(xpc_exiting == 1);
 956
 957        /*
 958         * Let the heartbeat checker thread and the discovery thread
 959         * (if one is running) know that they should exit. Also wake up
 960         * the heartbeat checker thread in case it's sleeping.
 961         */
 962        xpc_exiting = 1;
 963        wake_up_interruptible(&xpc_activate_IRQ_wq);
 964
 965        /* wait for the discovery thread to exit */
 966        wait_for_completion(&xpc_discovery_exited);
 967
 968        /* wait for the heartbeat checker thread to exit */
 969        wait_for_completion(&xpc_hb_checker_exited);
 970
 971        /* sleep for a 1/3 of a second or so */
 972        (void)msleep_interruptible(300);
 973
 974        /* wait for all partitions to become inactive */
 975
 976        printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
 977        xpc_disengage_timedout = 0;
 978
 979        do {
 980                active_part_count = 0;
 981
 982                for (partid = 0; partid < xp_max_npartitions; partid++) {
 983                        part = &xpc_partitions[partid];
 984
 985                        if (xpc_partition_disengaged(part) &&
 986                            part->act_state == XPC_P_AS_INACTIVE) {
 987                                continue;
 988                        }
 989
 990                        active_part_count++;
 991
 992                        XPC_DEACTIVATE_PARTITION(part, reason);
 993
 994                        if (part->disengage_timeout > disengage_timeout)
 995                                disengage_timeout = part->disengage_timeout;
 996                }
 997
 998                if (xpc_arch_ops.any_partition_engaged()) {
 999                        if (time_is_before_jiffies(printmsg_time)) {
1000                                dev_info(xpc_part, "waiting for remote "
1001                                         "partitions to deactivate, timeout in "
1002                                         "%ld seconds\n", (disengage_timeout -
1003                                         jiffies) / HZ);
1004                                printmsg_time = jiffies +
1005                                    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
1006                                printed_waiting_msg = 1;
1007                        }
1008
1009                } else if (active_part_count > 0) {
1010                        if (printed_waiting_msg) {
1011                                dev_info(xpc_part, "waiting for local partition"
1012                                         " to deactivate\n");
1013                                printed_waiting_msg = 0;
1014                        }
1015
1016                } else {
1017                        if (!xpc_disengage_timedout) {
1018                                dev_info(xpc_part, "all partitions have "
1019                                         "deactivated\n");
1020                        }
1021                        break;
1022                }
1023
1024                /* sleep for a 1/3 of a second or so */
1025                (void)msleep_interruptible(300);
1026
1027        } while (1);
1028
1029        DBUG_ON(xpc_arch_ops.any_partition_engaged());
1030
1031        xpc_teardown_rsvd_page();
1032
1033        if (reason == xpUnloading) {
1034                (void)unregister_die_notifier(&xpc_die_notifier);
1035                (void)unregister_reboot_notifier(&xpc_reboot_notifier);
1036        }
1037
1038        /* clear the interface to XPC's functions */
1039        xpc_clear_interface();
1040
1041        if (xpc_sysctl)
1042                unregister_sysctl_table(xpc_sysctl);
1043
1044        xpc_teardown_partitions();
1045
1046        if (is_uv())
1047                xpc_exit_uv();
1048}
1049
1050/*
1051 * This function is called when the system is being rebooted.
1052 */
1053static int
1054xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
1055{
1056        enum xp_retval reason;
1057
1058        switch (event) {
1059        case SYS_RESTART:
1060                reason = xpSystemReboot;
1061                break;
1062        case SYS_HALT:
1063                reason = xpSystemHalt;
1064                break;
1065        case SYS_POWER_OFF:
1066                reason = xpSystemPoweroff;
1067                break;
1068        default:
1069                reason = xpSystemGoingDown;
1070        }
1071
1072        xpc_do_exit(reason);
1073        return NOTIFY_DONE;
1074}
1075
1076/* Used to only allow one cpu to complete disconnect */
1077static unsigned int xpc_die_disconnecting;
1078
1079/*
1080 * Notify other partitions to deactivate from us by first disengaging from all
1081 * references to our memory.
1082 */
1083static void
1084xpc_die_deactivate(void)
1085{
1086        struct xpc_partition *part;
1087        short partid;
1088        int any_engaged;
1089        long keep_waiting;
1090        long wait_to_print;
1091
1092        if (cmpxchg(&xpc_die_disconnecting, 0, 1))
1093                return;
1094
1095        /* keep xpc_hb_checker thread from doing anything (just in case) */
1096        xpc_exiting = 1;
1097
1098        xpc_arch_ops.disallow_all_hbs();   /*indicate we're deactivated */
1099
1100        for (partid = 0; partid < xp_max_npartitions; partid++) {
1101                part = &xpc_partitions[partid];
1102
1103                if (xpc_arch_ops.partition_engaged(partid) ||
1104                    part->act_state != XPC_P_AS_INACTIVE) {
1105                        xpc_arch_ops.request_partition_deactivation(part);
1106                        xpc_arch_ops.indicate_partition_disengaged(part);
1107                }
1108        }
1109
1110        /*
1111         * Though we requested that all other partitions deactivate from us,
1112         * we only wait until they've all disengaged or we've reached the
1113         * defined timelimit.
1114         *
1115         * Given that one iteration through the following while-loop takes
1116         * approximately 200 microseconds, calculate the #of loops to take
1117         * before bailing and the #of loops before printing a waiting message.
1118         */
1119        keep_waiting = xpc_disengage_timelimit * 1000 * 5;
1120        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
1121
1122        while (1) {
1123                any_engaged = xpc_arch_ops.any_partition_engaged();
1124                if (!any_engaged) {
1125                        dev_info(xpc_part, "all partitions have deactivated\n");
1126                        break;
1127                }
1128
1129                if (!keep_waiting--) {
1130                        for (partid = 0; partid < xp_max_npartitions;
1131                             partid++) {
1132                                if (xpc_arch_ops.partition_engaged(partid)) {
1133                                        dev_info(xpc_part, "deactivate from "
1134                                                 "remote partition %d timed "
1135                                                 "out\n", partid);
1136                                }
1137                        }
1138                        break;
1139                }
1140
1141                if (!wait_to_print--) {
1142                        dev_info(xpc_part, "waiting for remote partitions to "
1143                                 "deactivate, timeout in %ld seconds\n",
1144                                 keep_waiting / (1000 * 5));
1145                        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
1146                            1000 * 5;
1147                }
1148
1149                udelay(200);
1150        }
1151}
1152
1153/*
1154 * This function is called when the system is being restarted or halted due
1155 * to some sort of system failure. If this is the case we need to notify the
1156 * other partitions to disengage from all references to our memory.
1157 * This function can also be called when our heartbeater could be offlined
1158 * for a time. In this case we need to notify other partitions to not worry
1159 * about the lack of a heartbeat.
1160 */
1161static int
1162xpc_system_die(struct notifier_block *nb, unsigned long event, void *_die_args)
1163{
1164#ifdef CONFIG_IA64              /* !!! temporary kludge */
1165        switch (event) {
1166        case DIE_MACHINE_RESTART:
1167        case DIE_MACHINE_HALT:
1168                xpc_die_deactivate();
1169                break;
1170
1171        case DIE_KDEBUG_ENTER:
1172                /* Should lack of heartbeat be ignored by other partitions? */
1173                if (!xpc_kdebug_ignore)
1174                        break;
1175
1176                /* fall through */
1177        case DIE_MCA_MONARCH_ENTER:
1178        case DIE_INIT_MONARCH_ENTER:
1179                xpc_arch_ops.offline_heartbeat();
1180                break;
1181
1182        case DIE_KDEBUG_LEAVE:
1183                /* Is lack of heartbeat being ignored by other partitions? */
1184                if (!xpc_kdebug_ignore)
1185                        break;
1186
1187                /* fall through */
1188        case DIE_MCA_MONARCH_LEAVE:
1189        case DIE_INIT_MONARCH_LEAVE:
1190                xpc_arch_ops.online_heartbeat();
1191                break;
1192        }
1193#else
1194        struct die_args *die_args = _die_args;
1195
1196        switch (event) {
1197        case DIE_TRAP:
1198                if (die_args->trapnr == X86_TRAP_DF)
1199                        xpc_die_deactivate();
1200
1201                if (((die_args->trapnr == X86_TRAP_MF) ||
1202                     (die_args->trapnr == X86_TRAP_XF)) &&
1203                    !user_mode(die_args->regs))
1204                        xpc_die_deactivate();
1205
1206                break;
1207        case DIE_INT3:
1208        case DIE_DEBUG:
1209                break;
1210        case DIE_OOPS:
1211        case DIE_GPF:
1212        default:
1213                xpc_die_deactivate();
1214        }
1215#endif
1216
1217        return NOTIFY_DONE;
1218}
1219
1220int __init
1221xpc_init(void)
1222{
1223        int ret;
1224        struct task_struct *kthread;
1225
1226        dev_set_name(xpc_part, "part");
1227        dev_set_name(xpc_chan, "chan");
1228
1229        if (is_uv()) {
1230                ret = xpc_init_uv();
1231
1232        } else {
1233                ret = -ENODEV;
1234        }
1235
1236        if (ret != 0)
1237                return ret;
1238
1239        ret = xpc_setup_partitions();
1240        if (ret != 0) {
1241                dev_err(xpc_part, "can't get memory for partition structure\n");
1242                goto out_1;
1243        }
1244
1245        xpc_sysctl = register_sysctl_table(xpc_sys_dir);
1246
1247        /*
1248         * Fill the partition reserved page with the information needed by
1249         * other partitions to discover we are alive and establish initial
1250         * communications.
1251         */
1252        ret = xpc_setup_rsvd_page();
1253        if (ret != 0) {
1254                dev_err(xpc_part, "can't setup our reserved page\n");
1255                goto out_2;
1256        }
1257
1258        /* add ourselves to the reboot_notifier_list */
1259        ret = register_reboot_notifier(&xpc_reboot_notifier);
1260        if (ret != 0)
1261                dev_warn(xpc_part, "can't register reboot notifier\n");
1262
1263        /* add ourselves to the die_notifier list */
1264        ret = register_die_notifier(&xpc_die_notifier);
1265        if (ret != 0)
1266                dev_warn(xpc_part, "can't register die notifier\n");
1267
1268        /*
1269         * The real work-horse behind xpc.  This processes incoming
1270         * interrupts and monitors remote heartbeats.
1271         */
1272        kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
1273        if (IS_ERR(kthread)) {
1274                dev_err(xpc_part, "failed while forking hb check thread\n");
1275                ret = -EBUSY;
1276                goto out_3;
1277        }
1278
1279        /*
1280         * Startup a thread that will attempt to discover other partitions to
1281         * activate based on info provided by SAL. This new thread is short
1282         * lived and will exit once discovery is complete.
1283         */
1284        kthread = kthread_run(xpc_initiate_discovery, NULL,
1285                              XPC_DISCOVERY_THREAD_NAME);
1286        if (IS_ERR(kthread)) {
1287                dev_err(xpc_part, "failed while forking discovery thread\n");
1288
1289                /* mark this new thread as a non-starter */
1290                complete(&xpc_discovery_exited);
1291
1292                xpc_do_exit(xpUnloading);
1293                return -EBUSY;
1294        }
1295
1296        /* set the interface to point at XPC's functions */
1297        xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
1298                          xpc_initiate_send, xpc_initiate_send_notify,
1299                          xpc_initiate_received, xpc_initiate_partid_to_nasids);
1300
1301        return 0;
1302
1303        /* initialization was not successful */
1304out_3:
1305        xpc_teardown_rsvd_page();
1306
1307        (void)unregister_die_notifier(&xpc_die_notifier);
1308        (void)unregister_reboot_notifier(&xpc_reboot_notifier);
1309out_2:
1310        if (xpc_sysctl)
1311                unregister_sysctl_table(xpc_sysctl);
1312
1313        xpc_teardown_partitions();
1314out_1:
1315        if (is_uv())
1316                xpc_exit_uv();
1317        return ret;
1318}
1319
1320module_init(xpc_init);
1321
1322void __exit
1323xpc_exit(void)
1324{
1325        xpc_do_exit(xpUnloading);
1326}
1327
1328module_exit(xpc_exit);
1329
1330MODULE_AUTHOR("Silicon Graphics, Inc.");
1331MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
1332MODULE_LICENSE("GPL");
1333
1334module_param(xpc_hb_interval, int, 0);
1335MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between "
1336                 "heartbeat increments.");
1337
1338module_param(xpc_hb_check_interval, int, 0);
1339MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
1340                 "heartbeat checks.");
1341
1342module_param(xpc_disengage_timelimit, int, 0);
1343MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
1344                 "for disengage to complete.");
1345
1346module_param(xpc_kdebug_ignore, int, 0);
1347MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
1348                 "other partitions when dropping into kdebug.");
1349