// SPDX-License-Identifier: ISC
/*
 * Copyright (c) 2004-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2012,2017 Qualcomm Atheros, Inc.
 * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
 */

#include <linux/module.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sd.h>
#include <linux/bitfield.h>
#include "core.h"
#include "bmi.h"
#include "debug.h"
#include "hif.h"
#include "htc.h"
#include "mac.h"
#include "targaddrs.h"
#include "trace.h"
#include "sdio.h"

/* inlined helper functions */

static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
                                                   size_t len)
{
        return __ALIGN_MASK((len), ar_sdio->mbox_info.block_mask);
}

static inline enum ath10k_htc_ep_id pipe_id_to_eid(u8 pipe_id)
{
        return (enum ath10k_htc_ep_id)pipe_id;
}

static inline void ath10k_sdio_mbox_free_rx_pkt(struct ath10k_sdio_rx_data *pkt)
{
        dev_kfree_skb(pkt->skb);
        pkt->skb = NULL;
        pkt->alloc_len = 0;
        pkt->act_len = 0;
        pkt->trailer_only = false;
}

static inline int ath10k_sdio_mbox_alloc_rx_pkt(struct ath10k_sdio_rx_data *pkt,
                                                size_t act_len, size_t full_len,
                                                bool part_of_bundle,
                                                bool last_in_bundle)
{
        pkt->skb = dev_alloc_skb(full_len);
        if (!pkt->skb)
                return -ENOMEM;

        pkt->act_len = act_len;
        pkt->alloc_len = full_len;
        pkt->part_of_bundle = part_of_bundle;
        pkt->last_in_bundle = last_in_bundle;
        pkt->trailer_only = false;

        return 0;
}

static inline bool is_trailer_only_msg(struct ath10k_sdio_rx_data *pkt)
{
        bool trailer_only = false;
        struct ath10k_htc_hdr *htc_hdr =
                (struct ath10k_htc_hdr *)pkt->skb->data;
        u16 len = __le16_to_cpu(htc_hdr->len);

        if (len == htc_hdr->trailer_len)
                trailer_only = true;

        return trailer_only;
}

/* sdio/mmc functions */

static inline void ath10k_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw,
                                             unsigned int address,
                                             unsigned char val)
{
        *arg = FIELD_PREP(BIT(31), write) |
               FIELD_PREP(BIT(27), raw) |
               FIELD_PREP(BIT(26), 1) |
               FIELD_PREP(GENMASK(25, 9), address) |
               FIELD_PREP(BIT(8), 1) |
               FIELD_PREP(GENMASK(7, 0), val);
}

static int ath10k_sdio_func0_cmd52_wr_byte(struct mmc_card *card,
                                           unsigned int address,
                                           unsigned char byte)
{
        struct mmc_command io_cmd;

        memset(&io_cmd, 0, sizeof(io_cmd));
        ath10k_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte);
        io_cmd.opcode = SD_IO_RW_DIRECT;
        io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;

        return mmc_wait_for_cmd(card->host, &io_cmd, 0);
}

static int ath10k_sdio_func0_cmd52_rd_byte(struct mmc_card *card,
                                           unsigned int address,
                                           unsigned char *byte)
{
        struct mmc_command io_cmd;
        int ret;

        memset(&io_cmd, 0, sizeof(io_cmd));
        ath10k_sdio_set_cmd52_arg(&io_cmd.arg, 0, 0, address, 0);
        io_cmd.opcode = SD_IO_RW_DIRECT;
        io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;

        ret = mmc_wait_for_cmd(card->host, &io_cmd, 0);
        if (!ret)
                *byte = io_cmd.resp[0];

        return ret;
}

static int ath10k_sdio_config(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        unsigned char byte, asyncintdelay = 2;
        int ret;

        ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio configuration\n");

        sdio_claim_host(func);

        byte = 0;
        ret = ath10k_sdio_func0_cmd52_rd_byte(func->card,
                                              SDIO_CCCR_DRIVE_STRENGTH,
                                              &byte);

        byte &= ~ATH10K_SDIO_DRIVE_DTSX_MASK;
        byte |= FIELD_PREP(ATH10K_SDIO_DRIVE_DTSX_MASK,
                           ATH10K_SDIO_DRIVE_DTSX_TYPE_D);

        ret = ath10k_sdio_func0_cmd52_wr_byte(func->card,
                                              SDIO_CCCR_DRIVE_STRENGTH,
                                              byte);

        byte = 0;
        ret = ath10k_sdio_func0_cmd52_rd_byte(
                func->card,
                CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR,
                &byte);

        byte |= (CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A |
                 CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C |
                 CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D);

        ret = ath10k_sdio_func0_cmd52_wr_byte(func->card,
                                              CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR,
                                              byte);
        if (ret) {
                ath10k_warn(ar, "failed to enable driver strength: %d\n", ret);
                goto out;
        }

        byte = 0;
        ret = ath10k_sdio_func0_cmd52_rd_byte(func->card,
                                              CCCR_SDIO_IRQ_MODE_REG_SDIO3,
                                              &byte);

        byte |= SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3;

        ret = ath10k_sdio_func0_cmd52_wr_byte(func->card,
                                              CCCR_SDIO_IRQ_MODE_REG_SDIO3,
                                              byte);
        if (ret) {
                ath10k_warn(ar, "failed to enable 4-bit async irq mode: %d\n",
                            ret);
                goto out;
        }

        byte = 0;
        ret = ath10k_sdio_func0_cmd52_rd_byte(func->card,
                                              CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS,
                                              &byte);

        byte &= ~CCCR_SDIO_ASYNC_INT_DELAY_MASK;
        byte |= FIELD_PREP(CCCR_SDIO_ASYNC_INT_DELAY_MASK, asyncintdelay);

        ret = ath10k_sdio_func0_cmd52_wr_byte(func->card,
                                              CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS,
                                              byte);

        /* give us some time to enable, in ms */
        func->enable_timeout = 100;

        ret = sdio_set_block_size(func, ar_sdio->mbox_info.block_size);
        if (ret) {
                ath10k_warn(ar, "failed to set sdio block size to %d: %d\n",
                            ar_sdio->mbox_info.block_size, ret);
                goto out;
        }

out:
        sdio_release_host(func);
        return ret;
}

static int ath10k_sdio_write32(struct ath10k *ar, u32 addr, u32 val)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        sdio_claim_host(func);

        sdio_writel(func, val, addr, &ret);
        if (ret) {
                ath10k_warn(ar, "failed to write 0x%x to address 0x%x: %d\n",
                            val, addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio write32 addr 0x%x val 0x%x\n",
                   addr, val);

out:
        sdio_release_host(func);

        return ret;
}

static int ath10k_sdio_writesb32(struct ath10k *ar, u32 addr, u32 val)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        __le32 *buf;
        int ret;

        buf = kzalloc(sizeof(*buf), GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        *buf = cpu_to_le32(val);

        sdio_claim_host(func);

        ret = sdio_writesb(func, addr, buf, sizeof(*buf));
        if (ret) {
                ath10k_warn(ar, "failed to write value 0x%x to fixed sb address 0x%x: %d\n",
                            val, addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio writesb32 addr 0x%x val 0x%x\n",
                   addr, val);

out:
        sdio_release_host(func);

        kfree(buf);

        return ret;
}

static int ath10k_sdio_read32(struct ath10k *ar, u32 addr, u32 *val)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        sdio_claim_host(func);
        *val = sdio_readl(func, addr, &ret);
        if (ret) {
                ath10k_warn(ar, "failed to read from address 0x%x: %d\n",
                            addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio read32 addr 0x%x val 0x%x\n",
                   addr, *val);

out:
        sdio_release_host(func);

        return ret;
}

static int ath10k_sdio_read(struct ath10k *ar, u32 addr, void *buf, size_t len)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        sdio_claim_host(func);

        ret = sdio_memcpy_fromio(func, buf, addr, len);
        if (ret) {
                ath10k_warn(ar, "failed to read from address 0x%x: %d\n",
                            addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio read addr 0x%x buf 0x%p len %zu\n",
                   addr, buf, len);
        ath10k_dbg_dump(ar, ATH10K_DBG_SDIO_DUMP, NULL, "sdio read ", buf, len);

out:
        sdio_release_host(func);

        return ret;
}

static int ath10k_sdio_write(struct ath10k *ar, u32 addr, const void *buf, size_t len)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        sdio_claim_host(func);

        /* For some reason toio() doesn't have const for the buffer, need
         * an ugly hack to workaround that.
         */
        ret = sdio_memcpy_toio(func, addr, (void *)buf, len);
        if (ret) {
                ath10k_warn(ar, "failed to write to address 0x%x: %d\n",
                            addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio write addr 0x%x buf 0x%p len %zu\n",
                   addr, buf, len);
        ath10k_dbg_dump(ar, ATH10K_DBG_SDIO_DUMP, NULL, "sdio write ", buf, len);

out:
        sdio_release_host(func);

        return ret;
}

static int ath10k_sdio_readsb(struct ath10k *ar, u32 addr, void *buf, size_t len)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        sdio_claim_host(func);

        len = round_down(len, ar_sdio->mbox_info.block_size);

        ret = sdio_readsb(func, buf, addr, len);
        if (ret) {
                ath10k_warn(ar, "failed to read from fixed (sb) address 0x%x: %d\n",
                            addr, ret);
                goto out;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio readsb addr 0x%x buf 0x%p len %zu\n",
                   addr, buf, len);
        ath10k_dbg_dump(ar, ATH10K_DBG_SDIO_DUMP, NULL, "sdio readsb ", buf, len);

out:
        sdio_release_host(func);

        return ret;
}

/* HIF mbox functions */

static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar,
                                              struct ath10k_sdio_rx_data *pkt,
                                              u32 *lookaheads,
                                              int *n_lookaheads)
{
        struct ath10k_htc *htc = &ar->htc;
        struct sk_buff *skb = pkt->skb;
        struct ath10k_htc_hdr *htc_hdr = (struct ath10k_htc_hdr *)skb->data;
        bool trailer_present = htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT;
        enum ath10k_htc_ep_id eid;
        u8 *trailer;
        int ret;

        if (trailer_present) {
                trailer = skb->data + skb->len - htc_hdr->trailer_len;

                eid = pipe_id_to_eid(htc_hdr->eid);

                ret = ath10k_htc_process_trailer(htc,
                                                 trailer,
                                                 htc_hdr->trailer_len,
                                                 eid,
                                                 lookaheads,
                                                 n_lookaheads);
                if (ret)
                        return ret;

                if (is_trailer_only_msg(pkt))
                        pkt->trailer_only = true;

                skb_trim(skb, skb->len - htc_hdr->trailer_len);
        }

        skb_pull(skb, sizeof(*htc_hdr));

        return 0;
}

static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
                                               u32 lookaheads[],
                                               int *n_lookahead)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_htc *htc = &ar->htc;
        struct ath10k_sdio_rx_data *pkt;
        struct ath10k_htc_ep *ep;
        enum ath10k_htc_ep_id id;
        int ret, i, *n_lookahead_local;
        u32 *lookaheads_local;
        int lookahead_idx = 0;

        for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
                lookaheads_local = lookaheads;
                n_lookahead_local = n_lookahead;

                id = ((struct ath10k_htc_hdr *)
                      &lookaheads[lookahead_idx++])->eid;

                if (id >= ATH10K_HTC_EP_COUNT) {
                        ath10k_warn(ar, "invalid endpoint in look-ahead: %d\n",
                                    id);
                        ret = -ENOMEM;
                        goto out;
                }

                ep = &htc->endpoint[id];

                if (ep->service_id == 0) {
                        ath10k_warn(ar, "ep %d is not connected\n", id);
                        ret = -ENOMEM;
                        goto out;
                }

                pkt = &ar_sdio->rx_pkts[i];

                if (pkt->part_of_bundle && !pkt->last_in_bundle) {
                        /* Only read lookahead's from RX trailers
                         * for the last packet in a bundle.
                         */
                        lookahead_idx--;
                        lookaheads_local = NULL;
                        n_lookahead_local = NULL;
                }

                ret = ath10k_sdio_mbox_rx_process_packet(ar,
                                                         pkt,
                                                         lookaheads_local,
                                                         n_lookahead_local);
                if (ret)
                        goto out;

                if (!pkt->trailer_only)
                        ep->ep_ops.ep_rx_complete(ar_sdio->ar, pkt->skb);
                else
                        kfree_skb(pkt->skb);

                /* The RX complete handler now owns the skb...*/
                pkt->skb = NULL;
                pkt->alloc_len = 0;
        }

        ret = 0;

out:
        /* Free all packets that was not passed on to the RX completion
         * handler...
         */
        for (; i < ar_sdio->n_rx_pkts; i++)
                ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);

        return ret;
}

static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar,
                                             struct ath10k_sdio_rx_data *rx_pkts,
                                             struct ath10k_htc_hdr *htc_hdr,
                                             size_t full_len, size_t act_len,
                                             size_t *bndl_cnt)
{
        int ret, i;

        *bndl_cnt = FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, htc_hdr->flags);

        if (*bndl_cnt > HTC_HOST_MAX_MSG_PER_RX_BUNDLE) {
                ath10k_warn(ar,
                            "HTC bundle length %u exceeds maximum %u\n",
                            le16_to_cpu(htc_hdr->len),
                            HTC_HOST_MAX_MSG_PER_RX_BUNDLE);
                return -ENOMEM;
        }

        /* Allocate bndl_cnt extra skb's for the bundle.
         * The package containing the
         * ATH10K_HTC_FLAG_BUNDLE_MASK flag is not included
         * in bndl_cnt. The skb for that packet will be
         * allocated separately.
         */
        for (i = 0; i < *bndl_cnt; i++) {
                ret = ath10k_sdio_mbox_alloc_rx_pkt(&rx_pkts[i],
                                                    act_len,
                                                    full_len,
                                                    true,
                                                    false);
                if (ret)
                        return ret;
        }

        return 0;
}

static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
                                     u32 lookaheads[], int n_lookaheads)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_htc_hdr *htc_hdr;
        size_t full_len, act_len;
        bool last_in_bundle;
        int ret, i;

        if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
                ath10k_warn(ar,
                            "the total number of pkgs to be fetched (%u) exceeds maximum %u\n",
                            n_lookaheads,
                            ATH10K_SDIO_MAX_RX_MSGS);
                ret = -ENOMEM;
                goto err;
        }

        for (i = 0; i < n_lookaheads; i++) {
                htc_hdr = (struct ath10k_htc_hdr *)&lookaheads[i];
                last_in_bundle = false;

                if (le16_to_cpu(htc_hdr->len) >
                    ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH) {
                        ath10k_warn(ar,
                                    "payload length %d exceeds max htc length: %zu\n",
                                    le16_to_cpu(htc_hdr->len),
                                    ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH);
                        ret = -ENOMEM;
                        goto err;
                }

                act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
                full_len = ath10k_sdio_calc_txrx_padded_len(ar_sdio, act_len);

                if (full_len > ATH10K_SDIO_MAX_BUFFER_SIZE) {
                        ath10k_warn(ar,
                                    "rx buffer requested with invalid htc_hdr length (%d, 0x%x): %d\n",
                                    htc_hdr->eid, htc_hdr->flags,
                                    le16_to_cpu(htc_hdr->len));
                        ret = -EINVAL;
                        goto err;
                }

                if (htc_hdr->flags & ATH10K_HTC_FLAG_BUNDLE_MASK) {
                        /* HTC header indicates that every packet to follow
                         * has the same padded length so that it can be
                         * optimally fetched as a full bundle.
                         */
                        size_t bndl_cnt;

                        ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
                                                                &ar_sdio->rx_pkts[i],
                                                                htc_hdr,
                                                                full_len,
                                                                act_len,
                                                                &bndl_cnt);

                        if (ret) {
                                ath10k_warn(ar, "alloc_bundle error %d\n", ret);
                                goto err;
                        }

                        n_lookaheads += bndl_cnt;
                        i += bndl_cnt;
                        /*Next buffer will be the last in the bundle */
                        last_in_bundle = true;
                }

                /* Allocate skb for packet. If the packet had the
                 * ATH10K_HTC_FLAG_BUNDLE_MASK flag set, all bundled
                 * packet skb's have been allocated in the previous step.
                 */
                if (htc_hdr->flags & ATH10K_HTC_FLAGS_RECV_1MORE_BLOCK)
                        full_len += ATH10K_HIF_MBOX_BLOCK_SIZE;

                ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i],
                                                    act_len,
                                                    full_len,
                                                    last_in_bundle,
                                                    last_in_bundle);
                if (ret) {
                        ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
                        goto err;
                }
        }

        ar_sdio->n_rx_pkts = i;

        return 0;

err:
        for (i = 0; i < ATH10K_SDIO_MAX_RX_MSGS; i++) {
                if (!ar_sdio->rx_pkts[i].alloc_len)
                        break;
                ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
        }

        return ret;
}

static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
                                      struct ath10k_sdio_rx_data *pkt)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sk_buff *skb = pkt->skb;
        struct ath10k_htc_hdr *htc_hdr;
        int ret;

        ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
                                 skb->data, pkt->alloc_len);
        if (ret)
                goto out;

        /* Update actual length. The original length may be incorrect,
         * as the FW will bundle multiple packets as long as their sizes
         * fit within the same aligned length (pkt->alloc_len).
         */
        htc_hdr = (struct ath10k_htc_hdr *)skb->data;
        pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
        if (pkt->act_len > pkt->alloc_len) {
                ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
                            pkt->act_len, pkt->alloc_len);
                ret = -EMSGSIZE;
                goto out;
        }

        skb_put(skb, pkt->act_len);

out:
        pkt->status = ret;

        return ret;
}

static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        int ret, i;

        for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
                ret = ath10k_sdio_mbox_rx_packet(ar,
                                                 &ar_sdio->rx_pkts[i]);
                if (ret)
                        goto err;
        }

        return 0;

err:
        /* Free all packets that was not successfully fetched. */
        for (; i < ar_sdio->n_rx_pkts; i++)
                ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);

        return ret;
}

/* This is the timeout for mailbox processing done in the sdio irq
 * handler. The timeout is deliberately set quite high since SDIO dump logs
 * over serial port can/will add a substantial overhead to the processing
 * (if enabled).
 */
#define SDIO_MBOX_PROCESSING_TIMEOUT_HZ (20 * HZ)

static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
                                                  u32 msg_lookahead, bool *done)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        u32 lookaheads[ATH10K_SDIO_MAX_RX_MSGS];
        int n_lookaheads = 1;
        unsigned long timeout;
        int ret;

        *done = true;

        /* Copy the lookahead obtained from the HTC register table into our
         * temp array as a start value.
         */
        lookaheads[0] = msg_lookahead;

        timeout = jiffies + SDIO_MBOX_PROCESSING_TIMEOUT_HZ;
        do {
                /* Try to allocate as many HTC RX packets indicated by
                 * n_lookaheads.
                 */
                ret = ath10k_sdio_mbox_rx_alloc(ar, lookaheads,
                                                n_lookaheads);
                if (ret)
                        break;

                if (ar_sdio->n_rx_pkts >= 2)
                        /* A recv bundle was detected, force IRQ status
                         * re-check again.
                         */
                        *done = false;

                ret = ath10k_sdio_mbox_rx_fetch(ar);

                /* Process fetched packets. This will potentially update
                 * n_lookaheads depending on if the packets contain lookahead
                 * reports.
                 */
                n_lookaheads = 0;
                ret = ath10k_sdio_mbox_rx_process_packets(ar,
                                                          lookaheads,
                                                          &n_lookaheads);

                if (!n_lookaheads || ret)
                        break;

                /* For SYNCH processing, if we get here, we are running
                 * through the loop again due to updated lookaheads. Set
                 * flag that we should re-check IRQ status registers again
                 * before leaving IRQ processing, this can net better
                 * performance in high throughput situations.
                 */
                *done = false;
        } while (time_before(jiffies, timeout));

        if (ret && (ret != -ECANCELED))
                ath10k_warn(ar, "failed to get pending recv messages: %d\n",
                            ret);

        return ret;
}

static int ath10k_sdio_mbox_proc_dbg_intr(struct ath10k *ar)
{
        u32 val;
        int ret;

        /* TODO: Add firmware crash handling */
        ath10k_warn(ar, "firmware crashed\n");

        /* read counter to clear the interrupt, the debug error interrupt is
         * counter 0.
         */
        ret = ath10k_sdio_read32(ar, MBOX_COUNT_DEC_ADDRESS, &val);
        if (ret)
                ath10k_warn(ar, "failed to clear debug interrupt: %d\n", ret);

        return ret;
}

static int ath10k_sdio_mbox_proc_counter_intr(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        u8 counter_int_status;
        int ret;

        mutex_lock(&irq_data->mtx);
        counter_int_status = irq_data->irq_proc_reg->counter_int_status &
                             irq_data->irq_en_reg->cntr_int_status_en;

        /* NOTE: other modules like GMBOX may use the counter interrupt for
         * credit flow control on other counters, we only need to check for
         * the debug assertion counter interrupt.
         */
        if (counter_int_status & ATH10K_SDIO_TARGET_DEBUG_INTR_MASK)
                ret = ath10k_sdio_mbox_proc_dbg_intr(ar);
        else
                ret = 0;

        mutex_unlock(&irq_data->mtx);

        return ret;
}

static int ath10k_sdio_mbox_proc_err_intr(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        u8 error_int_status;
        int ret;

        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio error interrupt\n");

        error_int_status = irq_data->irq_proc_reg->error_int_status & 0x0F;
        if (!error_int_status) {
                ath10k_warn(ar, "invalid error interrupt status: 0x%x\n",
                            error_int_status);
                return -EIO;
        }

        ath10k_dbg(ar, ATH10K_DBG_SDIO,
                   "sdio error_int_status 0x%x\n", error_int_status);

        if (FIELD_GET(MBOX_ERROR_INT_STATUS_WAKEUP_MASK,
                      error_int_status))
                ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio interrupt error wakeup\n");

        if (FIELD_GET(MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK,
                      error_int_status))
                ath10k_warn(ar, "rx underflow interrupt error\n");

        if (FIELD_GET(MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK,
                      error_int_status))
                ath10k_warn(ar, "tx overflow interrupt error\n");

        /* Clear the interrupt */
        irq_data->irq_proc_reg->error_int_status &= ~error_int_status;

        /* set W1C value to clear the interrupt, this hits the register first */
        ret = ath10k_sdio_writesb32(ar, MBOX_ERROR_INT_STATUS_ADDRESS,
                                    error_int_status);
        if (ret) {
                ath10k_warn(ar, "unable to write to error int status address: %d\n",
                            ret);
                return ret;
        }

        return 0;
}

static int ath10k_sdio_mbox_proc_cpu_intr(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        u8 cpu_int_status;
        int ret;

        mutex_lock(&irq_data->mtx);
        cpu_int_status = irq_data->irq_proc_reg->cpu_int_status &
                         irq_data->irq_en_reg->cpu_int_status_en;
        if (!cpu_int_status) {
                ath10k_warn(ar, "CPU interrupt status is zero\n");
                ret = -EIO;
                goto out;
        }

        /* Clear the interrupt */
        irq_data->irq_proc_reg->cpu_int_status &= ~cpu_int_status;

        /* Set up the register transfer buffer to hit the register 4 times,
         * this is done to make the access 4-byte aligned to mitigate issues
         * with host bus interconnects that restrict bus transfer lengths to
         * be a multiple of 4-bytes.
         *
         * Set W1C value to clear the interrupt, this hits the register first.
         */
        ret = ath10k_sdio_writesb32(ar, MBOX_CPU_INT_STATUS_ADDRESS,
                                    cpu_int_status);
        if (ret) {
                ath10k_warn(ar, "unable to write to cpu interrupt status address: %d\n",
                            ret);
                goto out;
        }

out:
        mutex_unlock(&irq_data->mtx);
        if (cpu_int_status & MBOX_CPU_STATUS_ENABLE_ASSERT_MASK) {
                ath10k_err(ar, "firmware crashed!\n");
                queue_work(ar->workqueue, &ar->restart_work);
        }
        return ret;
}

static int ath10k_sdio_mbox_read_int_status(struct ath10k *ar,
                                            u8 *host_int_status,
                                            u32 *lookahead)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        struct ath10k_sdio_irq_proc_regs *irq_proc_reg = irq_data->irq_proc_reg;
        struct ath10k_sdio_irq_enable_regs *irq_en_reg = irq_data->irq_en_reg;
        u8 htc_mbox = FIELD_PREP(ATH10K_HTC_MAILBOX_MASK, 1);
        int ret;

        mutex_lock(&irq_data->mtx);

        *lookahead = 0;
        *host_int_status = 0;

        /* int_status_en is supposed to be non zero, otherwise interrupts
         * shouldn't be enabled. There is however a short time frame during
         * initialization between the irq register and int_status_en init
         * where this can happen.
         * We silently ignore this condition.
         */
        if (!irq_en_reg->int_status_en) {
                ret = 0;
                goto out;
        }

        /* Read the first sizeof(struct ath10k_irq_proc_registers)
         * bytes of the HTC register table. This
         * will yield us the value of different int status
         * registers and the lookahead registers.
         */
        ret = ath10k_sdio_read(ar, MBOX_HOST_INT_STATUS_ADDRESS,
                               irq_proc_reg, sizeof(*irq_proc_reg));
        if (ret)
                goto out;

        /* Update only those registers that are enabled */
        *host_int_status = irq_proc_reg->host_int_status &
                           irq_en_reg->int_status_en;

        /* Look at mbox status */
        if (!(*host_int_status & htc_mbox)) {
                *lookahead = 0;
                ret = 0;
                goto out;
        }

        /* Mask out pending mbox value, we use look ahead as
         * the real flag for mbox processing.
         */
        *host_int_status &= ~htc_mbox;
        if (irq_proc_reg->rx_lookahead_valid & htc_mbox) {
                *lookahead = le32_to_cpu(
                        irq_proc_reg->rx_lookahead[ATH10K_HTC_MAILBOX]);
                if (!*lookahead)
                        ath10k_warn(ar, "sdio mbox lookahead is zero\n");
        }

out:
        mutex_unlock(&irq_data->mtx);
        return ret;
}

static int ath10k_sdio_mbox_proc_pending_irqs(struct ath10k *ar,
                                              bool *done)
{
        u8 host_int_status;
        u32 lookahead;
        int ret;

        /* NOTE: HIF implementation guarantees that the context of this
         * call allows us to perform SYNCHRONOUS I/O, that is we can block,
         * sleep or call any API that can block or switch thread/task
         * contexts. This is a fully schedulable context.
         */

        ret = ath10k_sdio_mbox_read_int_status(ar,
                                               &host_int_status,
                                               &lookahead);
        if (ret) {
                *done = true;
                goto out;
        }

        if (!host_int_status && !lookahead) {
                ret = 0;
                *done = true;
                goto out;
        }

        if (lookahead) {
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio pending mailbox msg lookahead 0x%08x\n",
                           lookahead);

                ret = ath10k_sdio_mbox_rxmsg_pending_handler(ar,
                                                             lookahead,
                                                             done);
                if (ret)
                        goto out;
        }

        /* now, handle the rest of the interrupts */
        ath10k_dbg(ar, ATH10K_DBG_SDIO,
                   "sdio host_int_status 0x%x\n", host_int_status);

        if (FIELD_GET(MBOX_HOST_INT_STATUS_CPU_MASK, host_int_status)) {
                /* CPU Interrupt */
                ret = ath10k_sdio_mbox_proc_cpu_intr(ar);
                if (ret)
                        goto out;
        }

        if (FIELD_GET(MBOX_HOST_INT_STATUS_ERROR_MASK, host_int_status)) {
                /* Error Interrupt */
                ret = ath10k_sdio_mbox_proc_err_intr(ar);
                if (ret)
                        goto out;

        }

        if (FIELD_GET(MBOX_HOST_INT_STATUS_COUNTER_MASK, host_int_status))
                /* Counter Interrupt */
                ret = ath10k_sdio_mbox_proc_counter_intr(ar);

        ret = 0;

out:
        /* An optimization to bypass reading the IRQ status registers
         * unecessarily which can re-wake the target, if upper layers
         * determine that we are in a low-throughput mode, we can rely on
         * taking another interrupt rather than re-checking the status
         * registers which can re-wake the target.
         *
         * NOTE : for host interfaces that makes use of detecting pending
         * mbox messages at hif can not use this optimization due to
         * possible side effects, SPI requires the host to drain all
         * messages from the mailbox before exiting the ISR routine.
         */

        ath10k_dbg(ar, ATH10K_DBG_SDIO,
                   "sdio pending irqs done %d status %d",
                   *done, ret);

        return ret;
}

static void ath10k_sdio_set_mbox_info(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_mbox_info *mbox_info = &ar_sdio->mbox_info;
        u16 device = ar_sdio->func->device, dev_id_base, dev_id_chiprev;

        mbox_info->htc_addr = ATH10K_HIF_MBOX_BASE_ADDR;
        mbox_info->block_size = ATH10K_HIF_MBOX_BLOCK_SIZE;
        mbox_info->block_mask = ATH10K_HIF_MBOX_BLOCK_SIZE - 1;
        mbox_info->gmbox_addr = ATH10K_HIF_GMBOX_BASE_ADDR;
        mbox_info->gmbox_sz = ATH10K_HIF_GMBOX_WIDTH;

        mbox_info->ext_info[0].htc_ext_addr = ATH10K_HIF_MBOX0_EXT_BASE_ADDR;

        dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, device);
        dev_id_chiprev = FIELD_GET(QCA_MANUFACTURER_ID_REV_MASK, device);
        switch (dev_id_base) {
        case QCA_MANUFACTURER_ID_AR6005_BASE:
                if (dev_id_chiprev < 4)
                        mbox_info->ext_info[0].htc_ext_sz =
                                ATH10K_HIF_MBOX0_EXT_WIDTH;
                else
                        /* from QCA6174 2.0(0x504), the width has been extended
                         * to 56K
                         */
                        mbox_info->ext_info[0].htc_ext_sz =
                                ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0;
                break;
        case QCA_MANUFACTURER_ID_QCA9377_BASE:
                mbox_info->ext_info[0].htc_ext_sz =
                        ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0;
                break;
        default:
                mbox_info->ext_info[0].htc_ext_sz =
                                ATH10K_HIF_MBOX0_EXT_WIDTH;
        }

        mbox_info->ext_info[1].htc_ext_addr =
                mbox_info->ext_info[0].htc_ext_addr +
                mbox_info->ext_info[0].htc_ext_sz +
                ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE;
        mbox_info->ext_info[1].htc_ext_sz = ATH10K_HIF_MBOX1_EXT_WIDTH;
}

/* BMI functions */

static int ath10k_sdio_bmi_credits(struct ath10k *ar)
{
        u32 addr, cmd_credits;
        unsigned long timeout;
        int ret;

        /* Read the counter register to get the command credits */
        addr = MBOX_COUNT_DEC_ADDRESS + ATH10K_HIF_MBOX_NUM_MAX * 4;
        timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
        cmd_credits = 0;

        while (time_before(jiffies, timeout) && !cmd_credits) {
                /* Hit the credit counter with a 4-byte access, the first byte
                 * read will hit the counter and cause a decrement, while the
                 * remaining 3 bytes has no effect. The rationale behind this
                 * is to make all HIF accesses 4-byte aligned.
                 */
                ret = ath10k_sdio_read32(ar, addr, &cmd_credits);
                if (ret) {
                        ath10k_warn(ar,
                                    "unable to decrement the command credit count register: %d\n",
                                    ret);
                        return ret;
                }

                /* The counter is only 8 bits.
                 * Ignore anything in the upper 3 bytes
                 */
                cmd_credits &= 0xFF;
        }

        if (!cmd_credits) {
                ath10k_warn(ar, "bmi communication timeout\n");
                return -ETIMEDOUT;
        }

        return 0;
}

static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
{
        unsigned long timeout;
        u32 rx_word;
        int ret;

        timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
        rx_word = 0;

        while ((time_before(jiffies, timeout)) && !rx_word) {
                ret = ath10k_sdio_read32(ar,
                                         MBOX_HOST_INT_STATUS_ADDRESS,
                                         &rx_word);
                if (ret) {
                        ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
                        return ret;
                }

                 /* all we really want is one bit */
                rx_word &= 1;
        }

        if (!rx_word) {
                ath10k_warn(ar, "bmi_recv_buf FIFO empty\n");
                return -EINVAL;
        }

        return ret;
}

static int ath10k_sdio_bmi_exchange_msg(struct ath10k *ar,
                                        void *req, u32 req_len,
                                        void *resp, u32 *resp_len)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        u32 addr;
        int ret;

        if (req) {
                ret = ath10k_sdio_bmi_credits(ar);
                if (ret)
                        return ret;

                addr = ar_sdio->mbox_info.htc_addr;

                memcpy(ar_sdio->bmi_buf, req, req_len);
                ret = ath10k_sdio_write(ar, addr, ar_sdio->bmi_buf, req_len);
                if (ret) {
                        ath10k_warn(ar,
                                    "unable to send the bmi data to the device: %d\n",
                                    ret);
                        return ret;
                }
        }

        if (!resp || !resp_len)
                /* No response expected */
                return 0;

        /* During normal bootup, small reads may be required.
         * Rather than issue an HIF Read and then wait as the Target
         * adds successive bytes to the FIFO, we wait here until
         * we know that response data is available.
         *
         * This allows us to cleanly timeout on an unexpected
         * Target failure rather than risk problems at the HIF level.
         * In particular, this avoids SDIO timeouts and possibly garbage
         * data on some host controllers.  And on an interconnect
         * such as Compact Flash (as well as some SDIO masters) which
         * does not provide any indication on data timeout, it avoids
         * a potential hang or garbage response.
         *
         * Synchronization is more difficult for reads larger than the
         * size of the MBOX FIFO (128B), because the Target is unable
         * to push the 129th byte of data until AFTER the Host posts an
         * HIF Read and removes some FIFO data.  So for large reads the
         * Host proceeds to post an HIF Read BEFORE all the data is
         * actually available to read.  Fortunately, large BMI reads do
         * not occur in practice -- they're supported for debug/development.
         *
         * So Host/Target BMI synchronization is divided into these cases:
         *  CASE 1: length < 4
         *        Should not happen
         *
         *  CASE 2: 4 <= length <= 128
         *        Wait for first 4 bytes to be in FIFO
         *        If CONSERVATIVE_BMI_READ is enabled, also wait for
         *        a BMI command credit, which indicates that the ENTIRE
         *        response is available in the the FIFO
         *
         *  CASE 3: length > 128
         *        Wait for the first 4 bytes to be in FIFO
         *
         * For most uses, a small timeout should be sufficient and we will
         * usually see a response quickly; but there may be some unusual
         * (debug) cases of BMI_EXECUTE where we want an larger timeout.
         * For now, we use an unbounded busy loop while waiting for
         * BMI_EXECUTE.
         *
         * If BMI_EXECUTE ever needs to support longer-latency execution,
         * especially in production, this code needs to be enhanced to sleep
         * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently
         * a function of Host processor speed.
         */
        ret = ath10k_sdio_bmi_get_rx_lookahead(ar);
        if (ret)
                return ret;

        /* We always read from the start of the mbox address */
        addr = ar_sdio->mbox_info.htc_addr;
        ret = ath10k_sdio_read(ar, addr, ar_sdio->bmi_buf, *resp_len);
        if (ret) {
                ath10k_warn(ar,
                            "unable to read the bmi data from the device: %d\n",
                            ret);
                return ret;
        }

        memcpy(resp, ar_sdio->bmi_buf, *resp_len);

        return 0;
}

/* sdio async handling functions */

static struct ath10k_sdio_bus_request
*ath10k_sdio_alloc_busreq(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_bus_request *bus_req;

        spin_lock_bh(&ar_sdio->lock);

        if (list_empty(&ar_sdio->bus_req_freeq)) {
                bus_req = NULL;
                goto out;
        }

        bus_req = list_first_entry(&ar_sdio->bus_req_freeq,
                                   struct ath10k_sdio_bus_request, list);
        list_del(&bus_req->list);

out:
        spin_unlock_bh(&ar_sdio->lock);
        return bus_req;
}

static void ath10k_sdio_free_bus_req(struct ath10k *ar,
                                     struct ath10k_sdio_bus_request *bus_req)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);

        memset(bus_req, 0, sizeof(*bus_req));

        spin_lock_bh(&ar_sdio->lock);
        list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq);
        spin_unlock_bh(&ar_sdio->lock);
}

static void __ath10k_sdio_write_async(struct ath10k *ar,
                                      struct ath10k_sdio_bus_request *req)
{
        struct ath10k_htc_ep *ep;
        struct sk_buff *skb;
        int ret;

        skb = req->skb;
        ret = ath10k_sdio_write(ar, req->address, skb->data, skb->len);
        if (ret)
                ath10k_warn(ar, "failed to write skb to 0x%x asynchronously: %d",
                            req->address, ret);

        if (req->htc_msg) {
                ep = &ar->htc.endpoint[req->eid];
                ath10k_htc_notify_tx_completion(ep, skb);
        } else if (req->comp) {
                complete(req->comp);
        }

        ath10k_sdio_free_bus_req(ar, req);
}

static void ath10k_sdio_write_async_work(struct work_struct *work)
{
        struct ath10k_sdio *ar_sdio = container_of(work, struct ath10k_sdio,
                                                   wr_async_work);
        struct ath10k *ar = ar_sdio->ar;
        struct ath10k_sdio_bus_request *req, *tmp_req;

        spin_lock_bh(&ar_sdio->wr_async_lock);

        list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
                list_del(&req->list);
                spin_unlock_bh(&ar_sdio->wr_async_lock);
                __ath10k_sdio_write_async(ar, req);
                spin_lock_bh(&ar_sdio->wr_async_lock);
        }

        spin_unlock_bh(&ar_sdio->wr_async_lock);
}

static int ath10k_sdio_prep_async_req(struct ath10k *ar, u32 addr,
                                      struct sk_buff *skb,
                                      struct completion *comp,
                                      bool htc_msg, enum ath10k_htc_ep_id eid)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_bus_request *bus_req;

        /* Allocate a bus request for the message and queue it on the
         * SDIO workqueue.
         */
        bus_req = ath10k_sdio_alloc_busreq(ar);
        if (!bus_req) {
                ath10k_warn(ar,
                            "unable to allocate bus request for async request\n");
                return -ENOMEM;
        }

        bus_req->skb = skb;
        bus_req->eid = eid;
        bus_req->address = addr;
        bus_req->htc_msg = htc_msg;
        bus_req->comp = comp;

        spin_lock_bh(&ar_sdio->wr_async_lock);
        list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq);
        spin_unlock_bh(&ar_sdio->wr_async_lock);

        return 0;
}

/* IRQ handler */

static void ath10k_sdio_irq_handler(struct sdio_func *func)
{
        struct ath10k_sdio *ar_sdio = sdio_get_drvdata(func);
        struct ath10k *ar = ar_sdio->ar;
        unsigned long timeout;
        bool done = false;
        int ret;

        /* Release the host during interrupts so we can pick it back up when
         * we process commands.
         */
        sdio_release_host(ar_sdio->func);

        timeout = jiffies + ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ;
        do {
                ret = ath10k_sdio_mbox_proc_pending_irqs(ar, &done);
                if (ret)
                        break;
        } while (time_before(jiffies, timeout) && !done);

        ath10k_mac_tx_push_pending(ar);

        sdio_claim_host(ar_sdio->func);

        if (ret && ret != -ECANCELED)
                ath10k_warn(ar, "failed to process pending SDIO interrupts: %d\n",
                            ret);
}

/* sdio HIF functions */

static int ath10k_sdio_hif_disable_intrs(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg;
        int ret;

        mutex_lock(&irq_data->mtx);

        memset(regs, 0, sizeof(*regs));
        ret = ath10k_sdio_write(ar, MBOX_INT_STATUS_ENABLE_ADDRESS,
                                &regs->int_status_en, sizeof(*regs));
        if (ret)
                ath10k_warn(ar, "unable to disable sdio interrupts: %d\n", ret);

        mutex_unlock(&irq_data->mtx);

        return ret;
}

static int ath10k_sdio_hif_power_up(struct ath10k *ar,
                                    enum ath10k_firmware_mode fw_mode)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sdio_func *func = ar_sdio->func;
        int ret;

        if (!ar_sdio->is_disabled)
                return 0;

        ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio power on\n");

        ret = ath10k_sdio_config(ar);
        if (ret) {
                ath10k_err(ar, "failed to config sdio: %d\n", ret);
                return ret;
        }

        sdio_claim_host(func);

        ret = sdio_enable_func(func);
        if (ret) {
                ath10k_warn(ar, "unable to enable sdio function: %d)\n", ret);
                sdio_release_host(func);
                return ret;
        }

        sdio_release_host(func);

        /* Wait for hardware to initialise. It should take a lot less than
         * 20 ms but let's be conservative here.
         */
        msleep(20);

        ar_sdio->is_disabled = false;

        ret = ath10k_sdio_hif_disable_intrs(ar);
        if (ret)
                return ret;

        return 0;
}

static void ath10k_sdio_hif_power_down(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        int ret;

        if (ar_sdio->is_disabled)
                return;

        ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio power off\n");

        /* Disable the card */
        sdio_claim_host(ar_sdio->func);

        ret = sdio_disable_func(ar_sdio->func);
        if (ret) {
                ath10k_warn(ar, "unable to disable sdio function: %d\n", ret);
                sdio_release_host(ar_sdio->func);
                return;
        }

        ret = mmc_hw_reset(ar_sdio->func->card->host);
        if (ret)
                ath10k_warn(ar, "unable to reset sdio: %d\n", ret);

        sdio_release_host(ar_sdio->func);

        ar_sdio->is_disabled = true;
}

static int ath10k_sdio_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
                                 struct ath10k_hif_sg_item *items, int n_items)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        enum ath10k_htc_ep_id eid;
        struct sk_buff *skb;
        int ret, i;

        eid = pipe_id_to_eid(pipe_id);

        for (i = 0; i < n_items; i++) {
                size_t padded_len;
                u32 address;

                skb = items[i].transfer_context;
                padded_len = ath10k_sdio_calc_txrx_padded_len(ar_sdio,
                                                              skb->len);
                skb_trim(skb, padded_len);

                /* Write TX data to the end of the mbox address space */
                address = ar_sdio->mbox_addr[eid] + ar_sdio->mbox_size[eid] -
                          skb->len;
                ret = ath10k_sdio_prep_async_req(ar, address, skb,
                                                 NULL, true, eid);
                if (ret)
                        return ret;
        }

        queue_work(ar_sdio->workqueue, &ar_sdio->wr_async_work);

        return 0;
}

static int ath10k_sdio_hif_enable_intrs(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg;
        int ret;

        mutex_lock(&irq_data->mtx);

        /* Enable all but CPU interrupts */
        regs->int_status_en = FIELD_PREP(MBOX_INT_STATUS_ENABLE_ERROR_MASK, 1) |
                              FIELD_PREP(MBOX_INT_STATUS_ENABLE_CPU_MASK, 1) |
                              FIELD_PREP(MBOX_INT_STATUS_ENABLE_COUNTER_MASK, 1);

        /* NOTE: There are some cases where HIF can do detection of
         * pending mbox messages which is disabled now.
         */
        regs->int_status_en |=
                FIELD_PREP(MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK, 1);

        /* Set up the CPU Interrupt Status Register, enable CPU sourced interrupt #0
         * #0 is used for report assertion from target
         */
        regs->cpu_int_status_en = FIELD_PREP(MBOX_CPU_STATUS_ENABLE_ASSERT_MASK, 1);

        /* Set up the Error Interrupt status Register */
        regs->err_int_status_en =
                FIELD_PREP(MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK, 1) |
                FIELD_PREP(MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK, 1);

        /* Enable Counter interrupt status register to get fatal errors for
         * debugging.
         */
        regs->cntr_int_status_en =
                FIELD_PREP(MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK,
                           ATH10K_SDIO_TARGET_DEBUG_INTR_MASK);

        ret = ath10k_sdio_write(ar, MBOX_INT_STATUS_ENABLE_ADDRESS,
                                &regs->int_status_en, sizeof(*regs));
        if (ret)
                ath10k_warn(ar,
                            "failed to update mbox interrupt status register : %d\n",
                            ret);

        mutex_unlock(&irq_data->mtx);
        return ret;
}

static int ath10k_sdio_hif_set_mbox_sleep(struct ath10k *ar, bool enable_sleep)
{
        u32 val;
        int ret;

        ret = ath10k_sdio_read32(ar, ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL, &val);
        if (ret) {
                ath10k_warn(ar, "failed to read fifo/chip control register: %d\n",
                            ret);
                return ret;
        }

        if (enable_sleep)
                val &= ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF;
        else
                val |= ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON;

        ret = ath10k_sdio_write32(ar, ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL, val);
        if (ret) {
                ath10k_warn(ar, "failed to write to FIFO_TIMEOUT_AND_CHIP_CONTROL: %d",
                            ret);
                return ret;
        }

        return 0;
}

/* HIF diagnostics */

static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
                                     size_t buf_len)
{
        int ret;

        /* set window register to start read cycle */
        ret = ath10k_sdio_write32(ar, MBOX_WINDOW_READ_ADDR_ADDRESS, address);
        if (ret) {
                ath10k_warn(ar, "failed to set mbox window read address: %d", ret);
                return ret;
        }

        /* read the data */
        ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, buf, buf_len);
        if (ret) {
                ath10k_warn(ar, "failed to read from mbox window data address: %d\n",
                            ret);
                return ret;
        }

        return 0;
}

static int ath10k_sdio_hif_diag_read32(struct ath10k *ar, u32 address,
                                       u32 *value)
{
        __le32 *val;
        int ret;

        val = kzalloc(sizeof(*val), GFP_KERNEL);
        if (!val)
                return -ENOMEM;

        ret = ath10k_sdio_hif_diag_read(ar, address, val, sizeof(*val));
        if (ret)
                goto out;

        *value = __le32_to_cpu(*val);

out:
        kfree(val);

        return ret;
}

static int ath10k_sdio_hif_diag_write_mem(struct ath10k *ar, u32 address,
                                          const void *data, int nbytes)
{
        int ret;

        /* set write data */
        ret = ath10k_sdio_write(ar, MBOX_WINDOW_DATA_ADDRESS, data, nbytes);
        if (ret) {
                ath10k_warn(ar,
                            "failed to write 0x%p to mbox window data address: %d\n",
                            data, ret);
                return ret;
        }

        /* set window register, which starts the write cycle */
        ret = ath10k_sdio_write32(ar, MBOX_WINDOW_WRITE_ADDR_ADDRESS, address);
        if (ret) {
                ath10k_warn(ar, "failed to set mbox window write address: %d", ret);
                return ret;
        }

        return 0;
}

static int ath10k_sdio_hif_swap_mailbox(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        u32 addr, val;
        int ret = 0;

        addr = host_interest_item_address(HI_ITEM(hi_acs_flags));

        ret = ath10k_sdio_hif_diag_read32(ar, addr, &val);
        if (ret) {
                ath10k_warn(ar, "unable to read hi_acs_flags : %d\n", ret);
                return ret;
        }

        if (val & HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK) {
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio mailbox swap service enabled\n");
                ar_sdio->swap_mbox = true;
        } else {
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio mailbox swap service disabled\n");
                ar_sdio->swap_mbox = false;
        }

        return 0;
}

/* HIF start/stop */

static int ath10k_sdio_hif_start(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        int ret;

        /* Sleep 20 ms before HIF interrupts are disabled.
         * This will give target plenty of time to process the BMI done
         * request before interrupts are disabled.
         */
        msleep(20);
        ret = ath10k_sdio_hif_disable_intrs(ar);
        if (ret)
                return ret;

        /* eid 0 always uses the lower part of the extended mailbox address
         * space (ext_info[0].htc_ext_addr).
         */
        ar_sdio->mbox_addr[0] = ar_sdio->mbox_info.ext_info[0].htc_ext_addr;
        ar_sdio->mbox_size[0] = ar_sdio->mbox_info.ext_info[0].htc_ext_sz;

        sdio_claim_host(ar_sdio->func);

        /* Register the isr */
        ret =  sdio_claim_irq(ar_sdio->func, ath10k_sdio_irq_handler);
        if (ret) {
                ath10k_warn(ar, "failed to claim sdio interrupt: %d\n", ret);
                sdio_release_host(ar_sdio->func);
                return ret;
        }

        sdio_release_host(ar_sdio->func);

        ret = ath10k_sdio_hif_enable_intrs(ar);
        if (ret)
                ath10k_warn(ar, "failed to enable sdio interrupts: %d\n", ret);

        /* Enable sleep and then disable it again */
        ret = ath10k_sdio_hif_set_mbox_sleep(ar, true);
        if (ret)
                return ret;

        /* Wait for 20ms for the written value to take effect */
        msleep(20);

        ret = ath10k_sdio_hif_set_mbox_sleep(ar, false);
        if (ret)
                return ret;

        return 0;
}

#define SDIO_IRQ_DISABLE_TIMEOUT_HZ (3 * HZ)

static void ath10k_sdio_irq_disable(struct ath10k *ar)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data;
        struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg;
        struct sk_buff *skb;
        struct completion irqs_disabled_comp;
        int ret;

        skb = dev_alloc_skb(sizeof(*regs));
        if (!skb)
                return;

        mutex_lock(&irq_data->mtx);

        memset(regs, 0, sizeof(*regs)); /* disable all interrupts */
        memcpy(skb->data, regs, sizeof(*regs));
        skb_put(skb, sizeof(*regs));

        mutex_unlock(&irq_data->mtx);

        init_completion(&irqs_disabled_comp);
        ret = ath10k_sdio_prep_async_req(ar, MBOX_INT_STATUS_ENABLE_ADDRESS,
                                         skb, &irqs_disabled_comp, false, 0);
        if (ret)
                goto out;

        queue_work(ar_sdio->workqueue, &ar_sdio->wr_async_work);

        /* Wait for the completion of the IRQ disable request.
         * If there is a timeout we will try to disable irq's anyway.
         */
        ret = wait_for_completion_timeout(&irqs_disabled_comp,
                                          SDIO_IRQ_DISABLE_TIMEOUT_HZ);
        if (!ret)
                ath10k_warn(ar, "sdio irq disable request timed out\n");

        sdio_claim_host(ar_sdio->func);

        ret = sdio_release_irq(ar_sdio->func);
        if (ret)
                ath10k_warn(ar, "failed to release sdio interrupt: %d\n", ret);

        sdio_release_host(ar_sdio->func);

out:
        kfree_skb(skb);
}

static void ath10k_sdio_hif_stop(struct ath10k *ar)
{
        struct ath10k_sdio_bus_request *req, *tmp_req;
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);

        ath10k_sdio_irq_disable(ar);

        cancel_work_sync(&ar_sdio->wr_async_work);

        spin_lock_bh(&ar_sdio->wr_async_lock);

        /* Free all bus requests that have not been handled */
        list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
                struct ath10k_htc_ep *ep;

                list_del(&req->list);

                if (req->htc_msg) {
                        ep = &ar->htc.endpoint[req->eid];
                        ath10k_htc_notify_tx_completion(ep, req->skb);
                } else if (req->skb) {
                        kfree_skb(req->skb);
                }
                ath10k_sdio_free_bus_req(ar, req);
        }

        spin_unlock_bh(&ar_sdio->wr_async_lock);
}

#ifdef CONFIG_PM

static int ath10k_sdio_hif_suspend(struct ath10k *ar)
{
        return -EOPNOTSUPP;
}

static int ath10k_sdio_hif_resume(struct ath10k *ar)
{
        switch (ar->state) {
        case ATH10K_STATE_OFF:
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio resume configuring sdio\n");

                /* need to set sdio settings after power is cut from sdio */
                ath10k_sdio_config(ar);
                break;

        case ATH10K_STATE_ON:
        default:
                break;
        }

        return 0;
}
#endif

static int ath10k_sdio_hif_map_service_to_pipe(struct ath10k *ar,
                                               u16 service_id,
                                               u8 *ul_pipe, u8 *dl_pipe)
{
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct ath10k_htc *htc = &ar->htc;
        u32 htt_addr, wmi_addr, htt_mbox_size, wmi_mbox_size;
        enum ath10k_htc_ep_id eid;
        bool ep_found = false;
        int i;

        /* For sdio, we are interested in the mapping between eid
         * and pipeid rather than service_id to pipe_id.
         * First we find out which eid has been allocated to the
         * service...
         */
        for (i = 0; i < ATH10K_HTC_EP_COUNT; i++) {
                if (htc->endpoint[i].service_id == service_id) {
                        eid = htc->endpoint[i].eid;
                        ep_found = true;
                        break;
                }
        }

        if (!ep_found)
                return -EINVAL;

        /* Then we create the simplest mapping possible between pipeid
         * and eid
         */
        *ul_pipe = *dl_pipe = (u8)eid;

        /* Normally, HTT will use the upper part of the extended
         * mailbox address space (ext_info[1].htc_ext_addr) and WMI ctrl
         * the lower part (ext_info[0].htc_ext_addr).
         * If fw wants swapping of mailbox addresses, the opposite is true.
         */
        if (ar_sdio->swap_mbox) {
                htt_addr = ar_sdio->mbox_info.ext_info[0].htc_ext_addr;
                wmi_addr = ar_sdio->mbox_info.ext_info[1].htc_ext_addr;
                htt_mbox_size = ar_sdio->mbox_info.ext_info[0].htc_ext_sz;
                wmi_mbox_size = ar_sdio->mbox_info.ext_info[1].htc_ext_sz;
        } else {
                htt_addr = ar_sdio->mbox_info.ext_info[1].htc_ext_addr;
                wmi_addr = ar_sdio->mbox_info.ext_info[0].htc_ext_addr;
                htt_mbox_size = ar_sdio->mbox_info.ext_info[1].htc_ext_sz;
                wmi_mbox_size = ar_sdio->mbox_info.ext_info[0].htc_ext_sz;
        }

        switch (service_id) {
        case ATH10K_HTC_SVC_ID_RSVD_CTRL:
                /* HTC ctrl ep mbox address has already been setup in
                 * ath10k_sdio_hif_start
                 */
                break;
        case ATH10K_HTC_SVC_ID_WMI_CONTROL:
                ar_sdio->mbox_addr[eid] = wmi_addr;
                ar_sdio->mbox_size[eid] = wmi_mbox_size;
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio wmi ctrl mbox_addr 0x%x mbox_size %d\n",
                           ar_sdio->mbox_addr[eid], ar_sdio->mbox_size[eid]);
                break;
        case ATH10K_HTC_SVC_ID_HTT_DATA_MSG:
                ar_sdio->mbox_addr[eid] = htt_addr;
                ar_sdio->mbox_size[eid] = htt_mbox_size;
                ath10k_dbg(ar, ATH10K_DBG_SDIO,
                           "sdio htt data mbox_addr 0x%x mbox_size %d\n",
                           ar_sdio->mbox_addr[eid], ar_sdio->mbox_size[eid]);
                break;
        default:
                ath10k_warn(ar, "unsupported HTC service id: %d\n",
                            service_id);
                return -EINVAL;
        }

        return 0;
}

static void ath10k_sdio_hif_get_default_pipe(struct ath10k *ar,
                                             u8 *ul_pipe, u8 *dl_pipe)
{
        ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio hif get default pipe\n");

        /* HTC ctrl ep (SVC id 1) always has eid (and pipe_id in our
         * case) == 0
         */
        *ul_pipe = 0;
        *dl_pipe = 0;
}

/* This op is currently only used by htc_wait_target if the HTC ready
 * message times out. It is not applicable for SDIO since there is nothing
 * we can do if the HTC ready message does not arrive in time.
 * TODO: Make this op non mandatory by introducing a NULL check in the
 * hif op wrapper.
 */
static void ath10k_sdio_hif_send_complete_check(struct ath10k *ar,
                                                u8 pipe, int force)
{
}

static const struct ath10k_hif_ops ath10k_sdio_hif_ops = {
        .tx_sg                  = ath10k_sdio_hif_tx_sg,
        .diag_read              = ath10k_sdio_hif_diag_read,
        .diag_write             = ath10k_sdio_hif_diag_write_mem,
        .exchange_bmi_msg       = ath10k_sdio_bmi_exchange_msg,
        .start                  = ath10k_sdio_hif_start,
        .stop                   = ath10k_sdio_hif_stop,
        .swap_mailbox           = ath10k_sdio_hif_swap_mailbox,
        .map_service_to_pipe    = ath10k_sdio_hif_map_service_to_pipe,
        .get_default_pipe       = ath10k_sdio_hif_get_default_pipe,
        .send_complete_check    = ath10k_sdio_hif_send_complete_check,
        .power_up               = ath10k_sdio_hif_power_up,
        .power_down             = ath10k_sdio_hif_power_down,
#ifdef CONFIG_PM
        .suspend                = ath10k_sdio_hif_suspend,
        .resume                 = ath10k_sdio_hif_resume,
#endif
};

#ifdef CONFIG_PM_SLEEP

/* Empty handlers so that mmc subsystem doesn't remove us entirely during
 * suspend. We instead follow cfg80211 suspend/resume handlers.
 */
static int ath10k_sdio_pm_suspend(struct device *device)
{
        return 0;
}

static int ath10k_sdio_pm_resume(struct device *device)
{
        return 0;
}

static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
                         ath10k_sdio_pm_resume);

#define ATH10K_SDIO_PM_OPS (&ath10k_sdio_pm_ops)

#else

#define ATH10K_SDIO_PM_OPS NULL

#endif /* CONFIG_PM_SLEEP */

static int ath10k_sdio_probe(struct sdio_func *func,
                             const struct sdio_device_id *id)
{
        struct ath10k_sdio *ar_sdio;
        struct ath10k *ar;
        enum ath10k_hw_rev hw_rev;
        u32 dev_id_base;
        struct ath10k_bus_params bus_params = {};
        int ret, i;

        /* Assumption: All SDIO based chipsets (so far) are QCA6174 based.
         * If there will be newer chipsets that does not use the hw reg
         * setup as defined in qca6174_regs and qca6174_values, this
         * assumption is no longer valid and hw_rev must be setup differently
         * depending on chipset.
         */
        hw_rev = ATH10K_HW_QCA6174;

        ar = ath10k_core_create(sizeof(*ar_sdio), &func->dev, ATH10K_BUS_SDIO,
                                hw_rev, &ath10k_sdio_hif_ops);
        if (!ar) {
                dev_err(&func->dev, "failed to allocate core\n");
                return -ENOMEM;
        }

        ath10k_dbg(ar, ATH10K_DBG_BOOT,
                   "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
                   func->num, func->vendor, func->device,
                   func->max_blksize, func->cur_blksize);

        ar_sdio = ath10k_sdio_priv(ar);

        ar_sdio->irq_data.irq_proc_reg =
                devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_proc_regs),
                             GFP_KERNEL);
        if (!ar_sdio->irq_data.irq_proc_reg) {
                ret = -ENOMEM;
                goto err_core_destroy;
        }

        ar_sdio->irq_data.irq_en_reg =
                devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_enable_regs),
                             GFP_KERNEL);
        if (!ar_sdio->irq_data.irq_en_reg) {
                ret = -ENOMEM;
                goto err_core_destroy;
        }

        ar_sdio->bmi_buf = devm_kzalloc(ar->dev, BMI_MAX_CMDBUF_SIZE, GFP_KERNEL);
        if (!ar_sdio->bmi_buf) {
                ret = -ENOMEM;
                goto err_core_destroy;
        }

        ar_sdio->func = func;
        sdio_set_drvdata(func, ar_sdio);

        ar_sdio->is_disabled = true;
        ar_sdio->ar = ar;

        spin_lock_init(&ar_sdio->lock);
        spin_lock_init(&ar_sdio->wr_async_lock);
        mutex_init(&ar_sdio->irq_data.mtx);

        INIT_LIST_HEAD(&ar_sdio->bus_req_freeq);
        INIT_LIST_HEAD(&ar_sdio->wr_asyncq);

        INIT_WORK(&ar_sdio->wr_async_work, ath10k_sdio_write_async_work);
        ar_sdio->workqueue = create_singlethread_workqueue("ath10k_sdio_wq");
        if (!ar_sdio->workqueue) {
                ret = -ENOMEM;
                goto err_core_destroy;
        }

        for (i = 0; i < ATH10K_SDIO_BUS_REQUEST_MAX_NUM; i++)
                ath10k_sdio_free_bus_req(ar, &ar_sdio->bus_req[i]);

        dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, id->device);
        switch (dev_id_base) {
        case QCA_MANUFACTURER_ID_AR6005_BASE:
        case QCA_MANUFACTURER_ID_QCA9377_BASE:
                ar->dev_id = QCA9377_1_0_DEVICE_ID;
                break;
        default:
                ret = -ENODEV;
                ath10k_err(ar, "unsupported device id %u (0x%x)\n",
                           dev_id_base, id->device);
                goto err_free_wq;
        }

        ar->id.vendor = id->vendor;
        ar->id.device = id->device;

        ath10k_sdio_set_mbox_info(ar);

        bus_params.dev_type = ATH10K_DEV_TYPE_HL;
        /* TODO: don't know yet how to get chip_id with SDIO */
        bus_params.chip_id = 0;
        bus_params.hl_msdu_ids = true;

        ret = ath10k_core_register(ar, &bus_params);
        if (ret) {
                ath10k_err(ar, "failed to register driver core: %d\n", ret);
                goto err_free_wq;
        }

        /* TODO: remove this once SDIO support is fully implemented */
        ath10k_warn(ar, "WARNING: ath10k SDIO support is work-in-progress, problems may arise!\n");

        return 0;

err_free_wq:
        destroy_workqueue(ar_sdio->workqueue);
err_core_destroy:
        ath10k_core_destroy(ar);

        return ret;
}

static void ath10k_sdio_remove(struct sdio_func *func)
{
        struct ath10k_sdio *ar_sdio = sdio_get_drvdata(func);
        struct ath10k *ar = ar_sdio->ar;

        ath10k_dbg(ar, ATH10K_DBG_BOOT,
                   "sdio removed func %d vendor 0x%x device 0x%x\n",
                   func->num, func->vendor, func->device);

        ath10k_core_unregister(ar);
        ath10k_core_destroy(ar);

        flush_workqueue(ar_sdio->workqueue);
        destroy_workqueue(ar_sdio->workqueue);
}

static const struct sdio_device_id ath10k_sdio_devices[] = {
        {SDIO_DEVICE(QCA_MANUFACTURER_CODE,
                     (QCA_SDIO_ID_AR6005_BASE | 0xA))},
        {SDIO_DEVICE(QCA_MANUFACTURER_CODE,
                     (QCA_SDIO_ID_QCA9377_BASE | 0x1))},
        {},
};

MODULE_DEVICE_TABLE(sdio, ath10k_sdio_devices);

static struct sdio_driver ath10k_sdio_driver = {
        .name = "ath10k_sdio",
        .id_table = ath10k_sdio_devices,
        .probe = ath10k_sdio_probe,
        .remove = ath10k_sdio_remove,
        .drv = {
                .owner = THIS_MODULE,
                .pm = ATH10K_SDIO_PM_OPS,
        },
};

static int __init ath10k_sdio_init(void)
{
        int ret;

        ret = sdio_register_driver(&ath10k_sdio_driver);
        if (ret)
                pr_err("sdio driver registration failed: %d\n", ret);

        return ret;
}

static void __exit ath10k_sdio_exit(void)
{
        sdio_unregister_driver(&ath10k_sdio_driver);
}

module_init(ath10k_sdio_init);
module_exit(ath10k_sdio_exit);

MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Driver support for Qualcomm Atheros 802.11ac WLAN SDIO devices");
MODULE_LICENSE("Dual BSD/GPL");