linux/drivers/scsi/3w-xxxx.c
<<
>>
Prefs
   1/* 
   2   3w-xxxx.c -- 3ware Storage Controller device driver for Linux.
   3
   4   Written By: Adam Radford <aradford@gmail.com>
   5   Modifications By: Joel Jacobson <linux@3ware.com>
   6                     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
   7                     Brad Strand <linux@3ware.com>
   8
   9   Copyright (C) 1999-2010 3ware Inc.
  10
  11   Kernel compatibility By:     Andre Hedrick <andre@suse.com>
  12   Non-Copyright (C) 2000       Andre Hedrick <andre@suse.com>
  13   
  14   Further tiny build fixes and trivial hoovering    Alan Cox
  15
  16   This program is free software; you can redistribute it and/or modify
  17   it under the terms of the GNU General Public License as published by
  18   the Free Software Foundation; version 2 of the License.
  19
  20   This program is distributed in the hope that it will be useful,           
  21   but WITHOUT ANY WARRANTY; without even the implied warranty of            
  22   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the             
  23   GNU General Public License for more details.                              
  24
  25   NO WARRANTY                                                               
  26   THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR        
  27   CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT      
  28   LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,      
  29   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is    
  30   solely responsible for determining the appropriateness of using and       
  31   distributing the Program and assumes all risks associated with its        
  32   exercise of rights under this Agreement, including but not limited to     
  33   the risks and costs of program errors, damage to or loss of data,         
  34   programs or equipment, and unavailability or interruption of operations.  
  35
  36   DISCLAIMER OF LIABILITY                                                   
  37   NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY   
  38   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL        
  39   DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND   
  40   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR     
  41   TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE    
  42   USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED  
  43   HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES             
  44
  45   You should have received a copy of the GNU General Public License         
  46   along with this program; if not, write to the Free Software               
  47   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA 
  48
  49   Bugs/Comments/Suggestions should be mailed to:                            
  50
  51   aradford@gmail.com
  52
  53
  54   History
  55   -------
  56   0.1.000 -     Initial release.
  57   0.4.000 -     Added support for Asynchronous Event Notification through
  58                 ioctls for 3DM.
  59   1.0.000 -     Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb
  60                 to disable drive write-cache before writes.
  61   1.1.000 -     Fixed performance bug with DPO & FUA not existing for WRITE_6.
  62   1.2.000 -     Added support for clean shutdown notification/feature table.
  63   1.02.00.001 - Added support for full command packet posts through ioctls
  64                 for 3DM.
  65                 Bug fix so hot spare drives don't show up.
  66   1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some
  67                 systems.
  68   08/21/00    - release previously allocated resources on failure at
  69                 tw_allocate_memory (acme)
  70   1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when
  71                 controller status is non-zero.
  72                 Added handling of request_sense opcode.
  73                 Fix possible null pointer dereference in 
  74                 tw_reset_device_extension()
  75   1.02.00.004 - Add support for device id of 3ware 7000 series controllers.
  76                 Make tw_setfeature() call with interrupts disabled.
  77                 Register interrupt handler before enabling interrupts.
  78                 Clear attention interrupt before draining aen queue.
  79   1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for
  80                 6000 and 5000 series controllers.
  81                 Reduce polling mdelays causing problems on some systems.
  82                 Fix use_sg = 1 calculation bug.
  83                 Check for scsi_register returning NULL.
  84                 Add aen count to /proc/scsi/3w-xxxx.
  85                 Remove aen code unit masking in tw_aen_complete().
  86   1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing
  87                 possible oops.
  88                 Fix possible null pointer dereference in tw_scsi_queue()
  89                 if done function pointer was invalid.
  90   1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl().
  91                 Remove check for invalid done function pointer from
  92                 tw_scsi_queue().
  93   1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards().
  94                 Add tw_decode_error() for printing readable error messages.
  95                 Print some useful information on certain aen codes.
  96                 Add tw_decode_bits() for interpreting status register output.
  97                 Make scsi_set_pci_device() for kernels >= 2.4.4
  98                 Fix bug where aen's could be lost before a reset.
  99                 Re-add spinlocks in tw_scsi_detect().
 100                 Fix possible null pointer dereference in tw_aen_drain_queue()
 101                 during initialization.
 102                 Clear pci parity errors during initialization and during io.
 103   1.02.00.009 - Remove redundant increment in tw_state_request_start().
 104                 Add ioctl support for direct ATA command passthru.
 105                 Add entire aen code string list.
 106   1.02.00.010 - Cleanup queueing code, fix jbod thoughput.
 107                 Fix get_param for specific units.
 108   1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost.
 109                 Fix tw_aen_drain_queue() to display useful info at init.
 110                 Set tw_host->max_id for 12 port cards.
 111                 Add ioctl support for raw command packet post from userspace
 112                 with sglist fragments (parameter and io).
 113   1.02.00.012 - Fix read capacity to under report by 1 sector to fix get
 114                 last sector ioctl.
 115   1.02.00.013 - Fix bug where more AEN codes weren't coming out during
 116                 driver initialization.
 117                 Improved handling of PCI aborts.
 118   1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost.
 119                 Increase timeout in tw_aen_drain_queue() to 30 seconds.
 120   1.02.00.015 - Re-write raw command post with data ioctl method.
 121                 Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5
 122                 Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5
 123                 Replace io_request_lock with host_lock for kernel 2.5
 124                 Set max_cmd_len to 16 for 3dm for kernel 2.5
 125   1.02.00.016 - Set host->max_sectors back up to 256.
 126   1.02.00.017 - Modified pci parity error handling/clearing from config space
 127                 during initialization.
 128   1.02.00.018 - Better handling of request sense opcode and sense information
 129                 for failed commands.  Add tw_decode_sense().
 130                 Replace all mdelay()'s with scsi_sleep().
 131   1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on
 132                 some SMP systems.
 133   1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to
 134                 pci_alloc/free_consistent().
 135                 Better alignment checking in tw_allocate_memory().
 136                 Cleanup tw_initialize_device_extension().
 137   1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance.
 138                 Improve handling of errors in tw_interrupt().
 139                 Add handling/clearing of controller queue error.
 140                 Empty stale responses before draining aen queue.
 141                 Fix tw_scsi_eh_abort() to not reset on every io abort.
 142                 Set can_queue in SHT to 255 to prevent hang from AEN.
 143   1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release().
 144   1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero.
 145   1.02.00.024 - Add severity levels to AEN strings.
 146   1.02.00.025 - Fix command interrupt spurious error messages.
 147                 Fix bug in raw command post with data ioctl method.
 148                 Fix bug where rollcall sometimes failed with cable errors.
 149                 Print unit # on all command timeouts.
 150   1.02.00.026 - Fix possible infinite retry bug with power glitch induced
 151                 drive timeouts.
 152                 Cleanup some AEN severity levels.
 153   1.02.00.027 - Add drive not supported AEN code for SATA controllers.
 154                 Remove spurious unknown ioctl error message.
 155   1.02.00.028 - Fix bug where multiple controllers with no units were the
 156                 same card number.
 157                 Fix bug where cards were being shut down more than once.
 158   1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory().
 159                 Replace pci_map_single() with pci_map_page() for highmem.
 160                 Check for tw_setfeature() failure.
 161   1.02.00.030 - Make driver 64-bit clean.
 162   1.02.00.031 - Cleanup polling timeouts/routines in several places.
 163                 Add support for mode sense opcode.
 164                 Add support for cache mode page.
 165                 Add support for synchronize cache opcode.
 166   1.02.00.032 - Fix small multicard rollcall bug.
 167                 Make driver stay loaded with no units for hot add/swap.
 168                 Add support for "twe" character device for ioctls.
 169                 Clean up request_id queueing code.
 170                 Fix tw_scsi_queue() spinlocks.
 171   1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's.
 172                 Initialize queues correctly when loading with no valid units.
 173   1.02.00.034 - Fix tw_decode_bits() to handle multiple errors.
 174                 Add support for user configurable cmd_per_lun.
 175                 Add support for sht->slave_configure().
 176   1.02.00.035 - Improve tw_allocate_memory() memory allocation.
 177                 Fix tw_chrdev_ioctl() to sleep correctly.
 178   1.02.00.036 - Increase character ioctl timeout to 60 seconds.
 179   1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds
 180                 for 'smartmontools' support.
 181   1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6.
 182                 Add support for cmds_per_lun module parameter.
 183   1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code.
 184                 Fix data_buffer_length usage in tw_chrdev_ioctl().
 185                 Update contact information.
 186   1.26.02.000 - Convert driver to pci_driver format.
 187   1.26.02.001 - Increase max ioctl buffer size to 512 sectors.
 188                 Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'.
 189                 Fix tw_remove() to free irq handler/unregister_chrdev()
 190                 before shutting down card.
 191                 Change to new 'change_queue_depth' api.
 192                 Fix 'handled=1' ISR usage, remove bogus IRQ check.
 193   1.26.02.002 - Free irq handler in __tw_shutdown().
 194                 Turn on RCD bit for caching mode page.
 195                 Serialize reset code.
 196   1.26.02.003 - Force 60 second timeout default.
 197*/
 198
 199#include <linux/module.h>
 200#include <linux/reboot.h>
 201#include <linux/spinlock.h>
 202#include <linux/interrupt.h>
 203#include <linux/moduleparam.h>
 204#include <linux/errno.h>
 205#include <linux/types.h>
 206#include <linux/delay.h>
 207#include <linux/gfp.h>
 208#include <linux/pci.h>
 209#include <linux/time.h>
 210#include <linux/mutex.h>
 211#include <asm/io.h>
 212#include <asm/irq.h>
 213#include <linux/uaccess.h>
 214#include <scsi/scsi.h>
 215#include <scsi/scsi_host.h>
 216#include <scsi/scsi_tcq.h>
 217#include <scsi/scsi_cmnd.h>
 218#include <scsi/scsi_eh.h>
 219#include "3w-xxxx.h"
 220
 221/* Globals */
 222#define TW_DRIVER_VERSION "1.26.02.003"
 223static DEFINE_MUTEX(tw_mutex);
 224static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
 225static int tw_device_extension_count = 0;
 226static int twe_major = -1;
 227
 228/* Module parameters */
 229MODULE_AUTHOR("LSI");
 230MODULE_DESCRIPTION("3ware Storage Controller Linux Driver");
 231MODULE_LICENSE("GPL");
 232MODULE_VERSION(TW_DRIVER_VERSION);
 233
 234/* Function prototypes */
 235static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
 236
 237/* Functions */
 238
 239/* This function will check the status register for unexpected bits */
 240static int tw_check_bits(u32 status_reg_value)
 241{
 242        if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) {  
 243                dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value);
 244                return 1;
 245        }
 246        if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) {
 247                dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value);
 248                return 1;
 249        }
 250
 251        return 0;
 252} /* End tw_check_bits() */
 253
 254/* This function will print readable messages from status register errors */
 255static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host)
 256{
 257        char host[16];
 258
 259        dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n");
 260
 261        if (print_host)
 262                sprintf(host, " scsi%d:", tw_dev->host->host_no);
 263        else
 264                host[0] = '\0';
 265
 266        if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) {
 267                printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host);
 268                outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 269        }
 270
 271        if (status_reg_value & TW_STATUS_PCI_ABORT) {
 272                printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host);
 273                outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev));
 274                pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT);
 275        }
 276
 277        if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
 278                printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host);
 279                outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 280        }
 281
 282        if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) {
 283                printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host);
 284                outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 285        }
 286
 287        if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
 288                if (tw_dev->reset_print == 0) {
 289                        printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host);
 290                        tw_dev->reset_print = 1;
 291                }
 292                return 1;
 293        }
 294        
 295        return 0;
 296} /* End tw_decode_bits() */
 297
 298/* This function will poll the status register for a flag */
 299static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 300{
 301        u32 status_reg_value;
 302        unsigned long before;
 303        int retval = 1;
 304
 305        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 306        before = jiffies;
 307
 308        if (tw_check_bits(status_reg_value))
 309                tw_decode_bits(tw_dev, status_reg_value, 0);
 310
 311        while ((status_reg_value & flag) != flag) {
 312                status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 313
 314                if (tw_check_bits(status_reg_value))
 315                        tw_decode_bits(tw_dev, status_reg_value, 0);
 316
 317                if (time_after(jiffies, before + HZ * seconds))
 318                        goto out;
 319
 320                msleep(50);
 321        }
 322        retval = 0;
 323out:
 324        return retval;
 325} /* End tw_poll_status() */
 326
 327/* This function will poll the status register for disappearance of a flag */
 328static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 329{
 330        u32 status_reg_value;
 331        unsigned long before;
 332        int retval = 1;
 333
 334        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 335        before = jiffies;
 336
 337        if (tw_check_bits(status_reg_value))
 338                tw_decode_bits(tw_dev, status_reg_value, 0);
 339
 340        while ((status_reg_value & flag) != 0) {
 341                status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 342
 343                if (tw_check_bits(status_reg_value))
 344                        tw_decode_bits(tw_dev, status_reg_value, 0);
 345
 346                if (time_after(jiffies, before + HZ * seconds))
 347                        goto out;
 348
 349                msleep(50);
 350        }
 351        retval = 0;
 352out:
 353        return retval;
 354} /* End tw_poll_status_gone() */
 355
 356/* This function will attempt to post a command packet to the board */
 357static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
 358{
 359        u32 status_reg_value;
 360        unsigned long command_que_value;
 361
 362        dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");
 363        command_que_value = tw_dev->command_packet_physical_address[request_id];
 364        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 365
 366        if (tw_check_bits(status_reg_value)) {
 367                dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n");
 368                tw_decode_bits(tw_dev, status_reg_value, 1);
 369        }
 370
 371        if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 372                /* We successfully posted the command packet */
 373                outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 374                tw_dev->state[request_id] = TW_S_POSTED;
 375                tw_dev->posted_request_count++;
 376                if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
 377                        tw_dev->max_posted_request_count = tw_dev->posted_request_count;
 378                }
 379        } else {
 380                /* Couldn't post the command packet, so we do it in the isr */
 381                if (tw_dev->state[request_id] != TW_S_PENDING) {
 382                        tw_dev->state[request_id] = TW_S_PENDING;
 383                        tw_dev->pending_request_count++;
 384                        if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
 385                                tw_dev->max_pending_request_count = tw_dev->pending_request_count;
 386                        }
 387                        tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
 388                        if (tw_dev->pending_tail == TW_Q_LENGTH-1) {
 389                                tw_dev->pending_tail = TW_Q_START;
 390                        } else {
 391                                tw_dev->pending_tail = tw_dev->pending_tail + 1;
 392                        }
 393                } 
 394                TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
 395                return 1;
 396        }
 397        return 0;
 398} /* End tw_post_command_packet() */
 399
 400/* This function will return valid sense buffer information for failed cmds */
 401static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense)
 402{
 403        int i;
 404        TW_Command *command;
 405
 406        dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n");
 407        command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 408
 409        printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid));
 410
 411        /* Attempt to return intelligent sense information */
 412        if (fill_sense) {
 413                if ((command->status == 0xc7) || (command->status == 0xcb)) {
 414                        for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) {
 415                                if (command->flags == tw_sense_table[i][0]) {
 416
 417                                        /* Valid bit and 'current errors' */
 418                                        tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70);
 419
 420                                        /* Sense key */
 421                                        tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1];
 422
 423                                        /* Additional sense length */
 424                                        tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */
 425
 426                                        /* Additional sense code */
 427                                        tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2];
 428
 429                                        /* Additional sense code qualifier */
 430                                        tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3];
 431
 432                                        tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
 433                                        return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */
 434                                }
 435                        }
 436                }
 437
 438                /* If no table match, error so we get a reset */
 439                return 1;
 440        }
 441
 442        return 0;
 443} /* End tw_decode_sense() */
 444
 445/* This function will report controller error status */
 446static int tw_check_errors(TW_Device_Extension *tw_dev) 
 447{
 448        u32 status_reg_value;
 449  
 450        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 451
 452        if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) {
 453                tw_decode_bits(tw_dev, status_reg_value, 0);
 454                return 1;
 455        }
 456
 457        return 0;
 458} /* End tw_check_errors() */
 459
 460/* This function will empty the response que */
 461static void tw_empty_response_que(TW_Device_Extension *tw_dev) 
 462{
 463        u32 status_reg_value, response_que_value;
 464
 465        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 466
 467        while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
 468                response_que_value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 469                status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 470        }
 471} /* End tw_empty_response_que() */
 472
 473/* This function will free a request_id */
 474static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id)
 475{
 476        tw_dev->free_queue[tw_dev->free_tail] = request_id;
 477        tw_dev->state[request_id] = TW_S_FINISHED;
 478        tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
 479} /* End tw_state_request_finish() */
 480
 481/* This function will assign an available request_id */
 482static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id)
 483{
 484        *request_id = tw_dev->free_queue[tw_dev->free_head];
 485        tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
 486        tw_dev->state[*request_id] = TW_S_STARTED;
 487} /* End tw_state_request_start() */
 488
 489/* Show some statistics about the card */
 490static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr,
 491                             char *buf)
 492{
 493        struct Scsi_Host *host = class_to_shost(dev);
 494        TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 495        unsigned long flags = 0;
 496        ssize_t len;
 497
 498        spin_lock_irqsave(tw_dev->host->host_lock, flags);
 499        len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n"
 500                       "Current commands posted:   %4d\n"
 501                       "Max commands posted:       %4d\n"
 502                       "Current pending commands:  %4d\n"
 503                       "Max pending commands:      %4d\n"
 504                       "Last sgl length:           %4d\n"
 505                       "Max sgl length:            %4d\n"
 506                       "Last sector count:         %4d\n"
 507                       "Max sector count:          %4d\n"
 508                       "SCSI Host Resets:          %4d\n"
 509                       "AEN's:                     %4d\n", 
 510                       TW_DRIVER_VERSION,
 511                       tw_dev->posted_request_count,
 512                       tw_dev->max_posted_request_count,
 513                       tw_dev->pending_request_count,
 514                       tw_dev->max_pending_request_count,
 515                       tw_dev->sgl_entries,
 516                       tw_dev->max_sgl_entries,
 517                       tw_dev->sector_count,
 518                       tw_dev->max_sector_count,
 519                       tw_dev->num_resets,
 520                       tw_dev->aen_count);
 521        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 522        return len;
 523} /* End tw_show_stats() */
 524
 525/* Create sysfs 'stats' entry */
 526static struct device_attribute tw_host_stats_attr = {
 527        .attr = {
 528                .name =         "stats",
 529                .mode =         S_IRUGO,
 530        },
 531        .show = tw_show_stats
 532};
 533
 534/* Host attributes initializer */
 535static struct device_attribute *tw_host_attrs[] = {
 536        &tw_host_stats_attr,
 537        NULL,
 538};
 539
 540/* This function will read the aen queue from the isr */
 541static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) 
 542{
 543        TW_Command *command_packet;
 544        TW_Param *param;
 545        unsigned long command_que_value;
 546        u32 status_reg_value;
 547        unsigned long param_value = 0;
 548
 549        dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");
 550
 551        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 552        if (tw_check_bits(status_reg_value)) {
 553                dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n");
 554                tw_decode_bits(tw_dev, status_reg_value, 1);
 555                return 1;
 556        }
 557        if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 558                printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
 559                return 1;
 560        }
 561        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 562        memset(command_packet, 0, sizeof(TW_Sector));
 563        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 564        command_packet->size = 4;
 565        command_packet->request_id = request_id;
 566        command_packet->status = 0;
 567        command_packet->flags = 0;
 568        command_packet->byte6.parameter_count = 1;
 569        command_que_value = tw_dev->command_packet_physical_address[request_id];
 570        if (command_que_value == 0) {
 571                printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
 572                return 1;
 573        }
 574        /* Now setup the param */
 575        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 576                printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
 577                return 1;
 578        }
 579        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 580        memset(param, 0, sizeof(TW_Sector));
 581        param->table_id = 0x401; /* AEN table */
 582        param->parameter_id = 2; /* Unit code */
 583        param->parameter_size_bytes = 2;
 584        param_value = tw_dev->alignment_physical_address[request_id];
 585        if (param_value == 0) {
 586                printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
 587                return 1;
 588        }
 589        command_packet->byte8.param.sgl[0].address = param_value;
 590        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 591
 592        /* Now post the command packet */
 593        if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 594                dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n");
 595                tw_dev->srb[request_id] = NULL; /* Flag internal command */
 596                tw_dev->state[request_id] = TW_S_POSTED;
 597                outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 598        } else {
 599                printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
 600                return 1;
 601        }
 602
 603        return 0;
 604} /* End tw_aen_read_queue() */
 605
 606/* This function will complete an aen request from the isr */
 607static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id) 
 608{
 609        TW_Param *param;
 610        unsigned short aen;
 611        int error = 0, table_max = 0;
 612
 613        dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n");
 614        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 615                printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
 616                return 1;
 617        }
 618        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 619        aen = *(unsigned short *)(param->data);
 620        dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen);
 621
 622        /* Print some useful info when certain aen codes come out */
 623        if (aen == 0x0ff) {
 624                printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no);
 625        } else {
 626                table_max = ARRAY_SIZE(tw_aen_string);
 627                if ((aen & 0x0ff) < table_max) {
 628                        if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 629                                printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8);
 630                        } else {
 631                                if (aen != 0x0) 
 632                                        printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]);
 633                        }
 634                } else {
 635                        printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen);
 636                }
 637        }
 638        if (aen != TW_AEN_QUEUE_EMPTY) {
 639                tw_dev->aen_count++;
 640
 641                /* Now queue the code */
 642                tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 643                if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 644                        tw_dev->aen_tail = TW_Q_START;
 645                } else {
 646                        tw_dev->aen_tail = tw_dev->aen_tail + 1;
 647                }
 648                if (tw_dev->aen_head == tw_dev->aen_tail) {
 649                        if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 650                                tw_dev->aen_head = TW_Q_START;
 651                        } else {
 652                                tw_dev->aen_head = tw_dev->aen_head + 1;
 653                        }
 654                }
 655
 656                error = tw_aen_read_queue(tw_dev, request_id);
 657                if (error) {
 658                        printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no);
 659                        tw_dev->state[request_id] = TW_S_COMPLETED;
 660                        tw_state_request_finish(tw_dev, request_id);
 661                }
 662        } else {
 663                tw_dev->state[request_id] = TW_S_COMPLETED;
 664                tw_state_request_finish(tw_dev, request_id);
 665        }
 666
 667        return 0;
 668} /* End tw_aen_complete() */
 669
 670/* This function will drain the aen queue after a soft reset */
 671static int tw_aen_drain_queue(TW_Device_Extension *tw_dev)
 672{
 673        TW_Command *command_packet;
 674        TW_Param *param;
 675        int request_id = 0;
 676        unsigned long command_que_value;
 677        unsigned long param_value;
 678        TW_Response_Queue response_queue;
 679        unsigned short aen;
 680        unsigned short aen_code;
 681        int finished = 0;
 682        int first_reset = 0;
 683        int queue = 0;
 684        int found = 0, table_max = 0;
 685
 686        dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");
 687
 688        if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) {
 689                dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count);
 690                return 1;
 691        }
 692        TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
 693
 694        /* Empty response queue */
 695        tw_empty_response_que(tw_dev);
 696
 697        /* Initialize command packet */
 698        if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 699                printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
 700                return 1;
 701        }
 702        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 703        memset(command_packet, 0, sizeof(TW_Sector));
 704        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 705        command_packet->size = 4;
 706        command_packet->request_id = request_id;
 707        command_packet->status = 0;
 708        command_packet->flags = 0;
 709        command_packet->byte6.parameter_count = 1;
 710        command_que_value = tw_dev->command_packet_physical_address[request_id];
 711        if (command_que_value == 0) {
 712                printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
 713                return 1;
 714        }
 715
 716        /* Now setup the param */
 717        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 718                printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
 719                return 1;
 720        }
 721        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 722        memset(param, 0, sizeof(TW_Sector));
 723        param->table_id = 0x401; /* AEN table */
 724        param->parameter_id = 2; /* Unit code */
 725        param->parameter_size_bytes = 2;
 726        param_value = tw_dev->alignment_physical_address[request_id];
 727        if (param_value == 0) {
 728                printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
 729                return 1;
 730        }
 731        command_packet->byte8.param.sgl[0].address = param_value;
 732        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 733
 734        /* Now drain the controller's aen queue */
 735        do {
 736                /* Post command packet */
 737                outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 738
 739                /* Now poll for completion */
 740                if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
 741                        response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 742                        request_id = TW_RESID_OUT(response_queue.response_id);
 743
 744                        if (request_id != 0) {
 745                                /* Unexpected request id */
 746                                printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
 747                                return 1;
 748                        }
 749                        
 750                        if (command_packet->status != 0) {
 751                                if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) {
 752                                        /* Bad response */
 753                                        tw_decode_sense(tw_dev, request_id, 0);
 754                                        return 1;
 755                                } else {
 756                                        /* We know this is a 3w-1x00, and doesn't support aen's */
 757                                        return 0;
 758                                }
 759                        }
 760
 761                        /* Now check the aen */
 762                        aen = *(unsigned short *)(param->data);
 763                        aen_code = (aen & 0x0ff);
 764                        queue = 0;
 765                        switch (aen_code) {
 766                                case TW_AEN_QUEUE_EMPTY:
 767                                        dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 768                                        if (first_reset != 1) {
 769                                                return 1;
 770                                        } else {
 771                                                finished = 1;
 772                                        }
 773                                        break;
 774                                case TW_AEN_SOFT_RESET:
 775                                        if (first_reset == 0) {
 776                                                first_reset = 1;
 777                                        } else {
 778                                                printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 779                                                tw_dev->aen_count++;
 780                                                queue = 1;
 781                                        }
 782                                        break;
 783                                default:
 784                                        if (aen == 0x0ff) {
 785                                                printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n");
 786                                        } else {
 787                                                table_max = ARRAY_SIZE(tw_aen_string);
 788                                                if ((aen & 0x0ff) < table_max) {
 789                                                        if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 790                                                                printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8);
 791                                                        } else {
 792                                                                printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 793                                                        }
 794                                                } else
 795                                                        printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen);
 796                                        }
 797                                        tw_dev->aen_count++;
 798                                        queue = 1;
 799                        }
 800
 801                        /* Now put the aen on the aen_queue */
 802                        if (queue == 1) {
 803                                tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 804                                if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 805                                        tw_dev->aen_tail = TW_Q_START;
 806                                } else {
 807                                        tw_dev->aen_tail = tw_dev->aen_tail + 1;
 808                                }
 809                                if (tw_dev->aen_head == tw_dev->aen_tail) {
 810                                        if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 811                                                tw_dev->aen_head = TW_Q_START;
 812                                        } else {
 813                                                tw_dev->aen_head = tw_dev->aen_head + 1;
 814                                        }
 815                                }
 816                        }
 817                        found = 1;
 818                }
 819                if (found == 0) {
 820                        printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
 821                        return 1;
 822                }
 823        } while (finished == 0);
 824
 825        return 0;
 826} /* End tw_aen_drain_queue() */
 827
 828/* This function will allocate memory */
 829static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
 830{
 831        int i;
 832        dma_addr_t dma_handle;
 833        unsigned long *cpu_addr = NULL;
 834
 835        dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");
 836
 837        cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev,
 838                        size * TW_Q_LENGTH, &dma_handle, GFP_KERNEL);
 839        if (cpu_addr == NULL) {
 840                printk(KERN_WARNING "3w-xxxx: dma_alloc_coherent() failed.\n");
 841                return 1;
 842        }
 843
 844        if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) {
 845                printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n");
 846                dma_free_coherent(&tw_dev->tw_pci_dev->dev, size * TW_Q_LENGTH,
 847                                cpu_addr, dma_handle);
 848                return 1;
 849        }
 850
 851        memset(cpu_addr, 0, size*TW_Q_LENGTH);
 852
 853        for (i=0;i<TW_Q_LENGTH;i++) {
 854                switch(which) {
 855                case 0:
 856                        tw_dev->command_packet_physical_address[i] = dma_handle+(i*size);
 857                        tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 858                        break;
 859                case 1:
 860                        tw_dev->alignment_physical_address[i] = dma_handle+(i*size);
 861                        tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 862                        break;
 863                default:
 864                        printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n");
 865                        return 1;
 866                }
 867        }
 868
 869        return 0;
 870} /* End tw_allocate_memory() */
 871
 872/* This function handles ioctl for the character device */
 873static long tw_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 874{
 875        int request_id;
 876        dma_addr_t dma_handle;
 877        unsigned short tw_aen_code;
 878        unsigned long flags;
 879        unsigned int data_buffer_length = 0;
 880        unsigned long data_buffer_length_adjusted = 0;
 881        struct inode *inode = file_inode(file);
 882        unsigned long *cpu_addr;
 883        long timeout;
 884        TW_New_Ioctl *tw_ioctl;
 885        TW_Passthru *passthru;
 886        TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)];
 887        int retval = -EFAULT;
 888        void __user *argp = (void __user *)arg;
 889
 890        dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n");
 891
 892        mutex_lock(&tw_mutex);
 893        /* Only let one of these through at a time */
 894        if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
 895                mutex_unlock(&tw_mutex);
 896                return -EINTR;
 897        }
 898
 899        /* First copy down the buffer length */
 900        if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int)))
 901                goto out;
 902
 903        /* Check size */
 904        if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) {
 905                retval = -EINVAL;
 906                goto out;
 907        }
 908
 909        /* Hardware can only do multiple of 512 byte transfers */
 910        data_buffer_length_adjusted = (data_buffer_length + 511) & ~511;
 911        
 912        /* Now allocate ioctl buf memory */
 913        cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL);
 914        if (cpu_addr == NULL) {
 915                retval = -ENOMEM;
 916                goto out;
 917        }
 918
 919        tw_ioctl = (TW_New_Ioctl *)cpu_addr;
 920
 921        /* Now copy down the entire ioctl */
 922        if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1))
 923                goto out2;
 924
 925        passthru = (TW_Passthru *)&tw_ioctl->firmware_command;
 926
 927        /* See which ioctl we are doing */
 928        switch (cmd) {
 929                case TW_OP_NOP:
 930                        dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n");
 931                        break;
 932                case TW_OP_AEN_LISTEN:
 933                        dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n");
 934                        memset(tw_ioctl->data_buffer, 0, data_buffer_length);
 935
 936                        spin_lock_irqsave(tw_dev->host->host_lock, flags);
 937                        if (tw_dev->aen_head == tw_dev->aen_tail) {
 938                                tw_aen_code = TW_AEN_QUEUE_EMPTY;
 939                        } else {
 940                                tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head];
 941                                if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 942                                        tw_dev->aen_head = TW_Q_START;
 943                                } else {
 944                                        tw_dev->aen_head = tw_dev->aen_head + 1;
 945                                }
 946                        }
 947                        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 948                        memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code));
 949                        break;
 950                case TW_CMD_PACKET_WITH_DATA:
 951                        dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n");
 952                        spin_lock_irqsave(tw_dev->host->host_lock, flags);
 953
 954                        tw_state_request_start(tw_dev, &request_id);
 955
 956                        /* Flag internal command */
 957                        tw_dev->srb[request_id] = NULL;
 958
 959                        /* Flag chrdev ioctl */
 960                        tw_dev->chrdev_request_id = request_id;
 961
 962                        tw_ioctl->firmware_command.request_id = request_id;
 963
 964                        /* Load the sg list */
 965                        switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) {
 966                        case 2:
 967                                tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 968                                tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted;
 969                                break;
 970                        case 3:
 971                                tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 972                                tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted;
 973                                break;
 974                        case 5:
 975                                passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 976                                passthru->sg_list[0].length = data_buffer_length_adjusted;
 977                                break;
 978                        }
 979
 980                        memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command));
 981
 982                        /* Now post the command packet to the controller */
 983                        tw_post_command_packet(tw_dev, request_id);
 984                        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 985
 986                        timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
 987
 988                        /* Now wait for the command to complete */
 989                        timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
 990
 991                        /* We timed out, and didn't get an interrupt */
 992                        if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
 993                                /* Now we need to reset the board */
 994                                printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
 995                                retval = -EIO;
 996                                if (tw_reset_device_extension(tw_dev)) {
 997                                        printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
 998                                }
 999                                goto out2;
1000                        }
1001
1002                        /* Now copy in the command packet response */
1003                        memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command));
1004
1005                        /* Now complete the io */
1006                        spin_lock_irqsave(tw_dev->host->host_lock, flags);
1007                        tw_dev->posted_request_count--;
1008                        tw_dev->state[request_id] = TW_S_COMPLETED;
1009                        tw_state_request_finish(tw_dev, request_id);
1010                        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1011                        break;
1012                default:
1013                        retval = -ENOTTY;
1014                        goto out2;
1015        }
1016
1017        /* Now copy the response to userspace */
1018        if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1))
1019                goto out2;
1020        retval = 0;
1021out2:
1022        /* Now free ioctl buf memory */
1023        dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle);
1024out:
1025        mutex_unlock(&tw_dev->ioctl_lock);
1026        mutex_unlock(&tw_mutex);
1027        return retval;
1028} /* End tw_chrdev_ioctl() */
1029
1030/* This function handles open for the character device */
1031/* NOTE that this function races with remove. */
1032static int tw_chrdev_open(struct inode *inode, struct file *file)
1033{
1034        unsigned int minor_number;
1035
1036        dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n");
1037
1038        if (!capable(CAP_SYS_ADMIN))
1039                return -EACCES;
1040
1041        minor_number = iminor(inode);
1042        if (minor_number >= tw_device_extension_count)
1043                return -ENODEV;
1044
1045        return 0;
1046} /* End tw_chrdev_open() */
1047
1048/* File operations struct for character device */
1049static const struct file_operations tw_fops = {
1050        .owner          = THIS_MODULE,
1051        .unlocked_ioctl = tw_chrdev_ioctl,
1052#ifdef CONFIG_COMPAT
1053        .compat_ioctl   = tw_chrdev_ioctl,
1054#endif
1055        .open           = tw_chrdev_open,
1056        .release        = NULL,
1057        .llseek         = noop_llseek,
1058};
1059
1060/* This function will free up device extension resources */
1061static void tw_free_device_extension(TW_Device_Extension *tw_dev)
1062{
1063        dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");
1064
1065        /* Free command packet and generic buffer memory */
1066        if (tw_dev->command_packet_virtual_address[0])
1067                dma_free_coherent(&tw_dev->tw_pci_dev->dev,
1068                                sizeof(TW_Command) * TW_Q_LENGTH,
1069                                tw_dev->command_packet_virtual_address[0],
1070                                tw_dev->command_packet_physical_address[0]);
1071
1072        if (tw_dev->alignment_virtual_address[0])
1073                dma_free_coherent(&tw_dev->tw_pci_dev->dev,
1074                                sizeof(TW_Sector) * TW_Q_LENGTH,
1075                                tw_dev->alignment_virtual_address[0],
1076                                tw_dev->alignment_physical_address[0]);
1077} /* End tw_free_device_extension() */
1078
1079/* This function will send an initconnection command to controller */
1080static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits) 
1081{
1082        unsigned long command_que_value;
1083        TW_Command  *command_packet;
1084        TW_Response_Queue response_queue;
1085        int request_id = 0;
1086
1087        dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");
1088
1089        /* Initialize InitConnection command packet */
1090        if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1091                printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
1092                return 1;
1093        }
1094
1095        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1096        memset(command_packet, 0, sizeof(TW_Sector));
1097        command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION);
1098        command_packet->size = TW_INIT_COMMAND_PACKET_SIZE;
1099        command_packet->request_id = request_id;
1100        command_packet->status = 0x0;
1101        command_packet->flags = 0x0;
1102        command_packet->byte6.message_credits = message_credits; 
1103        command_packet->byte8.init_connection.response_queue_pointer = 0x0;
1104        command_que_value = tw_dev->command_packet_physical_address[request_id];
1105
1106        if (command_que_value == 0) {
1107                printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
1108                return 1;
1109        }
1110  
1111        /* Send command packet to the board */
1112        outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1113    
1114        /* Poll for completion */
1115        if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1116                response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1117                request_id = TW_RESID_OUT(response_queue.response_id);
1118
1119                if (request_id != 0) {
1120                        /* unexpected request id */
1121                        printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
1122                        return 1;
1123                }
1124                if (command_packet->status != 0) {
1125                        /* bad response */
1126                        tw_decode_sense(tw_dev, request_id, 0);
1127                        return 1;
1128                }
1129        }
1130        return 0;
1131} /* End tw_initconnection() */
1132
1133/* Set a value in the features table */
1134static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size,
1135                  unsigned char *val)
1136{
1137        TW_Param *param;
1138        TW_Command  *command_packet;
1139        TW_Response_Queue response_queue;
1140        int request_id = 0;
1141        unsigned long command_que_value;
1142        unsigned long param_value;
1143
1144        /* Initialize SetParam command packet */
1145        if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1146                printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n");
1147                return 1;
1148        }
1149        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1150        memset(command_packet, 0, sizeof(TW_Sector));
1151        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1152
1153        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
1154        param->table_id = 0x404;  /* Features table */
1155        param->parameter_id = parm;
1156        param->parameter_size_bytes = param_size;
1157        memcpy(param->data, val, param_size);
1158
1159        param_value = tw_dev->alignment_physical_address[request_id];
1160        if (param_value == 0) {
1161                printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n");
1162                tw_dev->state[request_id] = TW_S_COMPLETED;
1163                tw_state_request_finish(tw_dev, request_id);
1164                tw_dev->srb[request_id]->result = (DID_OK << 16);
1165                tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1166        }
1167        command_packet->byte8.param.sgl[0].address = param_value;
1168        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1169
1170        command_packet->size = 4;
1171        command_packet->request_id = request_id;
1172        command_packet->byte6.parameter_count = 1;
1173
1174        command_que_value = tw_dev->command_packet_physical_address[request_id];
1175        if (command_que_value == 0) {
1176                printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n");
1177                return 1;
1178        }
1179
1180        /* Send command packet to the board */
1181        outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1182
1183        /* Poll for completion */
1184        if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1185                response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1186                request_id = TW_RESID_OUT(response_queue.response_id);
1187
1188                if (request_id != 0) {
1189                        /* unexpected request id */
1190                        printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n");
1191                        return 1;
1192                }
1193                if (command_packet->status != 0) {
1194                        /* bad response */
1195                        tw_decode_sense(tw_dev, request_id, 0);
1196                        return 1;
1197                }
1198        }
1199
1200        return 0;
1201} /* End tw_setfeature() */
1202
1203/* This function will reset a controller */
1204static int tw_reset_sequence(TW_Device_Extension *tw_dev) 
1205{
1206        int error = 0;
1207        int tries = 0;
1208        unsigned char c = 1;
1209
1210        /* Reset the board */
1211        while (tries < TW_MAX_RESET_TRIES) {
1212                TW_SOFT_RESET(tw_dev);
1213
1214                error = tw_aen_drain_queue(tw_dev);
1215                if (error) {
1216                        printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no);
1217                        tries++;
1218                        continue;
1219                }
1220
1221                /* Check for controller errors */
1222                if (tw_check_errors(tw_dev)) {
1223                        printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no);
1224                        tries++;
1225                        continue;
1226                }
1227
1228                /* Now the controller is in a good state */
1229                break;
1230        }
1231
1232        if (tries >= TW_MAX_RESET_TRIES) {
1233                printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no);
1234                return 1;
1235        }
1236
1237        error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS);
1238        if (error) {
1239                printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no);
1240                return 1;
1241        }
1242
1243        error = tw_setfeature(tw_dev, 2, 1, &c);
1244        if (error) {
1245                printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n");
1246        }
1247
1248        return 0;
1249} /* End tw_reset_sequence() */
1250
1251/* This function will initialize the fields of a device extension */
1252static int tw_initialize_device_extension(TW_Device_Extension *tw_dev)
1253{
1254        int i, error=0;
1255
1256        dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");
1257
1258        /* Initialize command packet buffers */
1259        error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0);
1260        if (error) {
1261                printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n");
1262                return 1;
1263        }
1264
1265        /* Initialize generic buffer */
1266        error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1);
1267        if (error) {
1268                printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n");
1269                return 1;
1270        }
1271
1272        for (i=0;i<TW_Q_LENGTH;i++) {
1273                tw_dev->free_queue[i] = i;
1274                tw_dev->state[i] = TW_S_INITIAL;
1275        }
1276
1277        tw_dev->pending_head = TW_Q_START;
1278        tw_dev->pending_tail = TW_Q_START;
1279        tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1280
1281        mutex_init(&tw_dev->ioctl_lock);
1282        init_waitqueue_head(&tw_dev->ioctl_wqueue);
1283
1284        return 0;
1285} /* End tw_initialize_device_extension() */
1286
1287/* This function will reset a device extension */
1288static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
1289{
1290        int i = 0;
1291        struct scsi_cmnd *srb;
1292        unsigned long flags = 0;
1293
1294        dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");
1295
1296        set_bit(TW_IN_RESET, &tw_dev->flags);
1297        TW_DISABLE_INTERRUPTS(tw_dev);
1298        TW_MASK_COMMAND_INTERRUPT(tw_dev);
1299        spin_lock_irqsave(tw_dev->host->host_lock, flags);
1300
1301        /* Abort all requests that are in progress */
1302        for (i=0;i<TW_Q_LENGTH;i++) {
1303                if ((tw_dev->state[i] != TW_S_FINISHED) && 
1304                    (tw_dev->state[i] != TW_S_INITIAL) &&
1305                    (tw_dev->state[i] != TW_S_COMPLETED)) {
1306                        srb = tw_dev->srb[i];
1307                        if (srb != NULL) {
1308                                srb->result = (DID_RESET << 16);
1309                                scsi_dma_unmap(srb);
1310                                srb->scsi_done(srb);
1311                        }
1312                }
1313        }
1314
1315        /* Reset queues and counts */
1316        for (i=0;i<TW_Q_LENGTH;i++) {
1317                tw_dev->free_queue[i] = i;
1318                tw_dev->state[i] = TW_S_INITIAL;
1319        }
1320        tw_dev->free_head = TW_Q_START;
1321        tw_dev->free_tail = TW_Q_START;
1322        tw_dev->posted_request_count = 0;
1323        tw_dev->pending_request_count = 0;
1324        tw_dev->pending_head = TW_Q_START;
1325        tw_dev->pending_tail = TW_Q_START;
1326        tw_dev->reset_print = 0;
1327
1328        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1329
1330        if (tw_reset_sequence(tw_dev)) {
1331                printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
1332                return 1;
1333        }
1334
1335        TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
1336        clear_bit(TW_IN_RESET, &tw_dev->flags);
1337        tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1338
1339        return 0;
1340} /* End tw_reset_device_extension() */
1341
1342/* This funciton returns unit geometry in cylinders/heads/sectors */
1343static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1344                sector_t capacity, int geom[]) 
1345{
1346        int heads, sectors, cylinders;
1347        TW_Device_Extension *tw_dev;
1348        
1349        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");
1350        tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
1351
1352        heads = 64;
1353        sectors = 32;
1354        cylinders = sector_div(capacity, heads * sectors);
1355
1356        if (capacity >= 0x200000) {
1357                heads = 255;
1358                sectors = 63;
1359                cylinders = sector_div(capacity, heads * sectors);
1360        }
1361
1362        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);
1363        geom[0] = heads;                         
1364        geom[1] = sectors;
1365        geom[2] = cylinders;
1366
1367        return 0;
1368} /* End tw_scsi_biosparam() */
1369
1370/* This is the new scsi eh reset function */
1371static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt) 
1372{
1373        TW_Device_Extension *tw_dev=NULL;
1374        int retval = FAILED;
1375
1376        tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1377
1378        tw_dev->num_resets++;
1379
1380        sdev_printk(KERN_WARNING, SCpnt->device,
1381                "WARNING: Command (0x%x) timed out, resetting card.\n",
1382                SCpnt->cmnd[0]);
1383
1384        /* Make sure we are not issuing an ioctl or resetting from ioctl */
1385        mutex_lock(&tw_dev->ioctl_lock);
1386
1387        /* Now reset the card and some of the device extension data */
1388        if (tw_reset_device_extension(tw_dev)) {
1389                printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
1390                goto out;
1391        }
1392
1393        retval = SUCCESS;
1394out:
1395        mutex_unlock(&tw_dev->ioctl_lock);
1396        return retval;
1397} /* End tw_scsi_eh_reset() */
1398
1399/* This function handles scsi inquiry commands */
1400static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id)
1401{
1402        TW_Param *param;
1403        TW_Command *command_packet;
1404        unsigned long command_que_value;
1405        unsigned long param_value;
1406
1407        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");
1408
1409        /* Initialize command packet */
1410        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1411        if (command_packet == NULL) {
1412                printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
1413                return 1;
1414        }
1415        memset(command_packet, 0, sizeof(TW_Sector));
1416        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1417        command_packet->size = 4;
1418        command_packet->request_id = request_id;
1419        command_packet->status = 0;
1420        command_packet->flags = 0;
1421        command_packet->byte6.parameter_count = 1;
1422
1423        /* Now setup the param */
1424        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1425                printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
1426                return 1;
1427        }
1428        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1429        memset(param, 0, sizeof(TW_Sector));
1430        param->table_id = 3;     /* unit summary table */
1431        param->parameter_id = 3; /* unitsstatus parameter */
1432        param->parameter_size_bytes = TW_MAX_UNITS;
1433        param_value = tw_dev->alignment_physical_address[request_id];
1434        if (param_value == 0) {
1435                printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
1436                return 1;
1437        }
1438
1439        command_packet->byte8.param.sgl[0].address = param_value;
1440        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1441        command_que_value = tw_dev->command_packet_physical_address[request_id];
1442        if (command_que_value == 0) {
1443                printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
1444                return 1;
1445        }
1446
1447        /* Now try to post the command packet */
1448        tw_post_command_packet(tw_dev, request_id);
1449
1450        return 0;
1451} /* End tw_scsiop_inquiry() */
1452
1453static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
1454                                 void *data, unsigned int len)
1455{
1456        scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len);
1457}
1458
1459/* This function is called by the isr to complete an inquiry command */
1460static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id)
1461{
1462        unsigned char *is_unit_present;
1463        unsigned char request_buffer[36];
1464        TW_Param *param;
1465
1466        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");
1467
1468        memset(request_buffer, 0, sizeof(request_buffer));
1469        request_buffer[0] = TYPE_DISK; /* Peripheral device type */
1470        request_buffer[1] = 0;         /* Device type modifier */
1471        request_buffer[2] = 0;         /* No ansi/iso compliance */
1472        request_buffer[4] = 31;        /* Additional length */
1473        memcpy(&request_buffer[8], "3ware   ", 8);       /* Vendor ID */
1474        sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id);
1475        memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3);
1476        tw_transfer_internal(tw_dev, request_id, request_buffer,
1477                             sizeof(request_buffer));
1478
1479        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1480        if (param == NULL) {
1481                printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
1482                return 1;
1483        }
1484        is_unit_present = &(param->data[0]);
1485
1486        if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1487                tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1488        } else {
1489                tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1490                tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1491                return TW_ISR_DONT_RESULT;
1492        }
1493
1494        return 0;
1495} /* End tw_scsiop_inquiry_complete() */
1496
1497/* This function handles scsi mode_sense commands */
1498static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id)
1499{
1500        TW_Param *param;
1501        TW_Command *command_packet;
1502        unsigned long command_que_value;
1503        unsigned long param_value;
1504
1505        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n");
1506
1507        /* Only page control = 0, page code = 0x8 (cache page) supported */
1508        if (tw_dev->srb[request_id]->cmnd[2] != 0x8) {
1509                tw_dev->state[request_id] = TW_S_COMPLETED;
1510                tw_state_request_finish(tw_dev, request_id);
1511                tw_dev->srb[request_id]->result = (DID_OK << 16);
1512                tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1513                return 0;
1514        }
1515
1516        /* Now read firmware cache setting for this unit */
1517        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1518        if (command_packet == NULL) {
1519                printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n");
1520                return 1;
1521        }
1522
1523        /* Setup the command packet */
1524        memset(command_packet, 0, sizeof(TW_Sector));
1525        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1526        command_packet->size = 4;
1527        command_packet->request_id = request_id;
1528        command_packet->status = 0;
1529        command_packet->flags = 0;
1530        command_packet->byte6.parameter_count = 1;
1531
1532        /* Setup the param */
1533        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1534                printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n");
1535                return 1;
1536        }
1537
1538        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1539        memset(param, 0, sizeof(TW_Sector));
1540        param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id;
1541        param->parameter_id = 7; /* unit flags */
1542        param->parameter_size_bytes = 1;
1543        param_value = tw_dev->alignment_physical_address[request_id];
1544        if (param_value == 0) {
1545                printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n");
1546                return 1;
1547        }
1548
1549        command_packet->byte8.param.sgl[0].address = param_value;
1550        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1551        command_que_value = tw_dev->command_packet_physical_address[request_id];
1552        if (command_que_value == 0) {
1553                printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n");
1554                return 1;
1555        }
1556
1557        /* Now try to post the command packet */
1558        tw_post_command_packet(tw_dev, request_id);
1559        
1560        return 0;
1561} /* End tw_scsiop_mode_sense() */
1562
1563/* This function is called by the isr to complete a mode sense command */
1564static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id)
1565{
1566        TW_Param *param;
1567        unsigned char *flags;
1568        unsigned char request_buffer[8];
1569
1570        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n");
1571
1572        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1573        if (param == NULL) {
1574                printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n");
1575                return 1;
1576        }
1577        flags = (char *)&(param->data[0]);
1578        memset(request_buffer, 0, sizeof(request_buffer));
1579
1580        request_buffer[0] = 0xf;        /* mode data length */
1581        request_buffer[1] = 0;          /* default medium type */
1582        request_buffer[2] = 0x10;       /* dpo/fua support on */
1583        request_buffer[3] = 0;          /* no block descriptors */
1584        request_buffer[4] = 0x8;        /* caching page */
1585        request_buffer[5] = 0xa;        /* page length */
1586        if (*flags & 0x1)
1587                request_buffer[6] = 0x5;        /* WCE on, RCD on */
1588        else
1589                request_buffer[6] = 0x1;        /* WCE off, RCD on */
1590        tw_transfer_internal(tw_dev, request_id, request_buffer,
1591                             sizeof(request_buffer));
1592
1593        return 0;
1594} /* End tw_scsiop_mode_sense_complete() */
1595
1596/* This function handles scsi read_capacity commands */
1597static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id) 
1598{
1599        TW_Param *param;
1600        TW_Command *command_packet;
1601        unsigned long command_que_value;
1602        unsigned long param_value;
1603
1604        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");
1605
1606        /* Initialize command packet */
1607        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1608
1609        if (command_packet == NULL) {
1610                dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");
1611                return 1;
1612        }
1613        memset(command_packet, 0, sizeof(TW_Sector));
1614        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1615        command_packet->size = 4;
1616        command_packet->request_id = request_id;
1617        command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1618        command_packet->status = 0;
1619        command_packet->flags = 0;
1620        command_packet->byte6.block_count = 1;
1621
1622        /* Now setup the param */
1623        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1624                dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");
1625                return 1;
1626        }
1627        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1628        memset(param, 0, sizeof(TW_Sector));
1629        param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + 
1630        tw_dev->srb[request_id]->device->id;
1631        param->parameter_id = 4;        /* unitcapacity parameter */
1632        param->parameter_size_bytes = 4;
1633        param_value = tw_dev->alignment_physical_address[request_id];
1634        if (param_value == 0) {
1635                dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");
1636                return 1;
1637        }
1638  
1639        command_packet->byte8.param.sgl[0].address = param_value;
1640        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1641        command_que_value = tw_dev->command_packet_physical_address[request_id];
1642        if (command_que_value == 0) {
1643                dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");
1644                return 1;
1645        }
1646
1647        /* Now try to post the command to the board */
1648        tw_post_command_packet(tw_dev, request_id);
1649  
1650        return 0;
1651} /* End tw_scsiop_read_capacity() */
1652
1653/* This function is called by the isr to complete a readcapacity command */
1654static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id)
1655{
1656        unsigned char *param_data;
1657        u32 capacity;
1658        char buff[8];
1659        TW_Param *param;
1660
1661        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");
1662
1663        memset(buff, 0, sizeof(buff));
1664        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1665        if (param == NULL) {
1666                printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
1667                return 1;
1668        }
1669        param_data = &(param->data[0]);
1670
1671        capacity = (param_data[3] << 24) | (param_data[2] << 16) | 
1672                   (param_data[1] << 8) | param_data[0];
1673
1674        /* Subtract one sector to fix get last sector ioctl */
1675        capacity -= 1;
1676
1677        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);
1678
1679        /* Number of LBA's */
1680        buff[0] = (capacity >> 24);
1681        buff[1] = (capacity >> 16) & 0xff;
1682        buff[2] = (capacity >> 8) & 0xff;
1683        buff[3] = capacity & 0xff;
1684
1685        /* Block size in bytes (512) */
1686        buff[4] = (TW_BLOCK_SIZE >> 24);
1687        buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff;
1688        buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff;
1689        buff[7] = TW_BLOCK_SIZE & 0xff;
1690
1691        tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff));
1692
1693        return 0;
1694} /* End tw_scsiop_read_capacity_complete() */
1695
1696/* This function handles scsi read or write commands */
1697static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) 
1698{
1699        TW_Command *command_packet;
1700        unsigned long command_que_value;
1701        u32 lba = 0x0, num_sectors = 0x0;
1702        int i, use_sg;
1703        struct scsi_cmnd *srb;
1704        struct scatterlist *sglist, *sg;
1705
1706        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
1707
1708        srb = tw_dev->srb[request_id];
1709
1710        sglist = scsi_sglist(srb);
1711        if (!sglist) {
1712                printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
1713                return 1;
1714        }
1715
1716        /* Initialize command packet */
1717        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1718        if (command_packet == NULL) {
1719                dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");
1720                return 1;
1721        }
1722
1723        if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) {
1724                command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ);
1725        } else {
1726                command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE);
1727        }
1728
1729        command_packet->size = 3;
1730        command_packet->request_id = request_id;
1731        command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id);
1732        command_packet->status = 0;
1733        command_packet->flags = 0;
1734
1735        if (srb->cmnd[0] == WRITE_10) {
1736                if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10))
1737                        command_packet->flags = 1;
1738        }
1739
1740        if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) {
1741                lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3];
1742                num_sectors = (u32)srb->cmnd[4];
1743        } else {
1744                lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5];
1745                num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
1746        }
1747  
1748        /* Update sector statistic */
1749        tw_dev->sector_count = num_sectors;
1750        if (tw_dev->sector_count > tw_dev->max_sector_count)
1751                tw_dev->max_sector_count = tw_dev->sector_count;
1752  
1753        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);
1754        command_packet->byte8.io.lba = lba;
1755        command_packet->byte6.block_count = num_sectors;
1756
1757        use_sg = scsi_dma_map(srb);
1758        if (use_sg <= 0)
1759                return 1;
1760
1761        scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
1762                command_packet->byte8.io.sgl[i].address = sg_dma_address(sg);
1763                command_packet->byte8.io.sgl[i].length = sg_dma_len(sg);
1764                command_packet->size+=2;
1765        }
1766
1767        /* Update SG statistics */
1768        tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
1769        if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
1770                tw_dev->max_sgl_entries = tw_dev->sgl_entries;
1771
1772        command_que_value = tw_dev->command_packet_physical_address[request_id];
1773        if (command_que_value == 0) {
1774                dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n");
1775                return 1;
1776        }
1777      
1778        /* Now try to post the command to the board */
1779        tw_post_command_packet(tw_dev, request_id);
1780
1781        return 0;
1782} /* End tw_scsiop_read_write() */
1783
1784/* This function will handle the request sense scsi command */
1785static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id)
1786{
1787        char request_buffer[18];
1788
1789        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");
1790
1791        memset(request_buffer, 0, sizeof(request_buffer));
1792        request_buffer[0] = 0x70; /* Immediate fixed format */
1793        request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */
1794        /* leave all other fields zero, giving effectively NO_SENSE return */
1795        tw_transfer_internal(tw_dev, request_id, request_buffer,
1796                             sizeof(request_buffer));
1797
1798        tw_dev->state[request_id] = TW_S_COMPLETED;
1799        tw_state_request_finish(tw_dev, request_id);
1800
1801        /* If we got a request_sense, we probably want a reset, return error */
1802        tw_dev->srb[request_id]->result = (DID_ERROR << 16);
1803        tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1804
1805        return 0;
1806} /* End tw_scsiop_request_sense() */
1807
1808/* This function will handle synchronize cache scsi command */
1809static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id)
1810{
1811        TW_Command *command_packet;
1812        unsigned long command_que_value;
1813
1814        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n");
1815
1816        /* Send firmware flush command for this unit */
1817        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1818        if (command_packet == NULL) {
1819                printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n");
1820                return 1;
1821        }
1822
1823        /* Setup the command packet */
1824        memset(command_packet, 0, sizeof(TW_Sector));
1825        command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE);
1826        command_packet->size = 2;
1827        command_packet->request_id = request_id;
1828        command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1829        command_packet->status = 0;
1830        command_packet->flags = 0;
1831        command_packet->byte6.parameter_count = 1;
1832        command_que_value = tw_dev->command_packet_physical_address[request_id];
1833        if (command_que_value == 0) {
1834                printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n");
1835                return 1;
1836        }
1837
1838        /* Now try to post the command packet */
1839        tw_post_command_packet(tw_dev, request_id);
1840
1841        return 0;
1842} /* End tw_scsiop_synchronize_cache() */
1843
1844/* This function will handle test unit ready scsi command */
1845static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id)
1846{
1847        TW_Param *param;
1848        TW_Command *command_packet;
1849        unsigned long command_que_value;
1850        unsigned long param_value;
1851
1852        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");
1853
1854        /* Initialize command packet */
1855        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1856        if (command_packet == NULL) {
1857                printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n");
1858                return 1;
1859        }
1860        memset(command_packet, 0, sizeof(TW_Sector));
1861        command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1862        command_packet->size = 4;
1863        command_packet->request_id = request_id;
1864        command_packet->status = 0;
1865        command_packet->flags = 0;
1866        command_packet->byte6.parameter_count = 1;
1867
1868        /* Now setup the param */
1869        if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1870                printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n");
1871                return 1;
1872        }
1873        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1874        memset(param, 0, sizeof(TW_Sector));
1875        param->table_id = 3;     /* unit summary table */
1876        param->parameter_id = 3; /* unitsstatus parameter */
1877        param->parameter_size_bytes = TW_MAX_UNITS;
1878        param_value = tw_dev->alignment_physical_address[request_id];
1879        if (param_value == 0) {
1880                printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n");
1881                return 1;
1882        }
1883
1884        command_packet->byte8.param.sgl[0].address = param_value;
1885        command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1886        command_que_value = tw_dev->command_packet_physical_address[request_id];
1887        if (command_que_value == 0) {
1888                printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n");
1889                return 1;
1890        }
1891
1892        /* Now try to post the command packet */
1893        tw_post_command_packet(tw_dev, request_id);
1894
1895        return 0;
1896} /* End tw_scsiop_test_unit_ready() */
1897
1898/* This function is called by the isr to complete a testunitready command */
1899static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id)
1900{
1901        unsigned char *is_unit_present;
1902        TW_Param *param;
1903
1904        dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n");
1905
1906        param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1907        if (param == NULL) {
1908                printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n");
1909                return 1;
1910        }
1911        is_unit_present = &(param->data[0]);
1912
1913        if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1914                tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1915        } else {
1916                tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1917                tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1918                return TW_ISR_DONT_RESULT;
1919        }
1920
1921        return 0;
1922} /* End tw_scsiop_test_unit_ready_complete() */
1923
1924/* This is the main scsi queue function to handle scsi opcodes */
1925static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
1926{
1927        unsigned char *command = SCpnt->cmnd;
1928        int request_id = 0;
1929        int retval = 1;
1930        TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1931
1932        /* If we are resetting due to timed out ioctl, report as busy */
1933        if (test_bit(TW_IN_RESET, &tw_dev->flags))
1934                return SCSI_MLQUEUE_HOST_BUSY;
1935
1936        /* Save done function into struct scsi_cmnd */
1937        SCpnt->scsi_done = done;
1938                 
1939        /* Queue the command and get a request id */
1940        tw_state_request_start(tw_dev, &request_id);
1941
1942        /* Save the scsi command for use by the ISR */
1943        tw_dev->srb[request_id] = SCpnt;
1944
1945        switch (*command) {
1946                case READ_10:
1947                case READ_6:
1948                case WRITE_10:
1949                case WRITE_6:
1950                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n");
1951                        retval = tw_scsiop_read_write(tw_dev, request_id);
1952                        break;
1953                case TEST_UNIT_READY:
1954                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");
1955                        retval = tw_scsiop_test_unit_ready(tw_dev, request_id);
1956                        break;
1957                case INQUIRY:
1958                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");
1959                        retval = tw_scsiop_inquiry(tw_dev, request_id);
1960                        break;
1961                case READ_CAPACITY:
1962                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");
1963                        retval = tw_scsiop_read_capacity(tw_dev, request_id);
1964                        break;
1965                case REQUEST_SENSE:
1966                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n");
1967                        retval = tw_scsiop_request_sense(tw_dev, request_id);
1968                        break;
1969                case MODE_SENSE:
1970                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n");
1971                        retval = tw_scsiop_mode_sense(tw_dev, request_id);
1972                        break;
1973                case SYNCHRONIZE_CACHE:
1974                        dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n");
1975                        retval = tw_scsiop_synchronize_cache(tw_dev, request_id);
1976                        break;
1977                case TW_IOCTL:
1978                        printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n");
1979                        break;
1980                default:
1981                        printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);
1982                        tw_dev->state[request_id] = TW_S_COMPLETED;
1983                        tw_state_request_finish(tw_dev, request_id);
1984                        SCpnt->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
1985                        scsi_build_sense_buffer(1, SCpnt->sense_buffer, ILLEGAL_REQUEST, 0x20, 0);
1986                        done(SCpnt);
1987                        retval = 0;
1988        }
1989        if (retval) {
1990                tw_dev->state[request_id] = TW_S_COMPLETED;
1991                tw_state_request_finish(tw_dev, request_id);
1992                SCpnt->result = (DID_ERROR << 16);
1993                done(SCpnt);
1994                retval = 0;
1995        }
1996        return retval;
1997} /* End tw_scsi_queue() */
1998
1999static DEF_SCSI_QCMD(tw_scsi_queue)
2000
2001/* This function is the interrupt service routine */
2002static irqreturn_t tw_interrupt(int irq, void *dev_instance) 
2003{
2004        int request_id;
2005        u32 status_reg_value;
2006        TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
2007        TW_Response_Queue response_que;
2008        int error = 0, retval = 0;
2009        TW_Command *command_packet;
2010        int handled = 0;
2011
2012        /* Get the host lock for io completions */
2013        spin_lock(tw_dev->host->host_lock);
2014
2015        /* Read the registers */
2016        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2017
2018        /* Check if this is our interrupt, otherwise bail */
2019        if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT))
2020                goto tw_interrupt_bail;
2021
2022        handled = 1;
2023
2024        /* If we are resetting, bail */
2025        if (test_bit(TW_IN_RESET, &tw_dev->flags))
2026                goto tw_interrupt_bail;
2027
2028        /* Check controller for errors */
2029        if (tw_check_bits(status_reg_value)) {
2030                dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2031                if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2032                        TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2033                        goto tw_interrupt_bail;
2034                }
2035        }
2036
2037        /* Handle host interrupt */
2038        if (status_reg_value & TW_STATUS_HOST_INTERRUPT) {
2039                dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");
2040                TW_CLEAR_HOST_INTERRUPT(tw_dev);
2041        }
2042
2043        /* Handle attention interrupt */
2044        if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) {
2045                dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");
2046                TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
2047                tw_state_request_start(tw_dev, &request_id);
2048                error = tw_aen_read_queue(tw_dev, request_id);
2049                if (error) {
2050                        printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no);
2051                        tw_dev->state[request_id] = TW_S_COMPLETED;
2052                        tw_state_request_finish(tw_dev, request_id);
2053                }
2054        }
2055
2056        /* Handle command interrupt */
2057        if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) {
2058                /* Drain as many pending commands as we can */
2059                while (tw_dev->pending_request_count > 0) {
2060                        request_id = tw_dev->pending_queue[tw_dev->pending_head];
2061                        if (tw_dev->state[request_id] != TW_S_PENDING) {
2062                                printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no);
2063                                break;
2064                        }
2065                        if (tw_post_command_packet(tw_dev, request_id)==0) {
2066                                if (tw_dev->pending_head == TW_Q_LENGTH-1) {
2067                                        tw_dev->pending_head = TW_Q_START;
2068                                } else {
2069                                        tw_dev->pending_head = tw_dev->pending_head + 1;
2070                                }
2071                                tw_dev->pending_request_count--;
2072                        } else {
2073                                /* If we get here, we will continue re-posting on the next command interrupt */
2074                                break;
2075                        }
2076                }
2077                /* If there are no more pending requests, we mask command interrupt */
2078                if (tw_dev->pending_request_count == 0) 
2079                        TW_MASK_COMMAND_INTERRUPT(tw_dev);
2080        }
2081
2082        /* Handle response interrupt */
2083        if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) {
2084                /* Drain the response queue from the board */
2085                while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
2086                        /* Read response queue register */
2087                        response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
2088                        request_id = TW_RESID_OUT(response_que.response_id);
2089                        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
2090                        error = 0;
2091
2092                        /* Check for bad response */
2093                        if (command_packet->status != 0) {
2094                                /* If internal command, don't error, don't fill sense */
2095                                if (tw_dev->srb[request_id] == NULL) {
2096                                        tw_decode_sense(tw_dev, request_id, 0);
2097                                } else {
2098                                        error = tw_decode_sense(tw_dev, request_id, 1);
2099                                }
2100                        }
2101
2102                        /* Check for correct state */
2103                        if (tw_dev->state[request_id] != TW_S_POSTED) {
2104                                if (tw_dev->srb[request_id] != NULL) {
2105                                        printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no);
2106                                        error = 1;
2107                                }
2108                        }
2109
2110                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);
2111
2112                        /* Check for internal command completion */
2113                        if (tw_dev->srb[request_id] == NULL) {
2114                                dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n");
2115                                /* Check for chrdev ioctl completion */
2116                                if (request_id != tw_dev->chrdev_request_id) {
2117                                        retval = tw_aen_complete(tw_dev, request_id);
2118                                        if (retval) {
2119                                                printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no);
2120                                        }
2121                                } else {
2122                                        tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
2123                                        wake_up(&tw_dev->ioctl_wqueue);
2124                                }
2125                        } else {
2126                                switch (tw_dev->srb[request_id]->cmnd[0]) {
2127                                case READ_10:
2128                                case READ_6:
2129                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n");
2130                                        break;
2131                                case WRITE_10:
2132                                case WRITE_6:
2133                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n");
2134                                        break;
2135                                case TEST_UNIT_READY:
2136                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n");
2137                                        error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id);
2138                                        break;
2139                                case INQUIRY:
2140                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");
2141                                        error = tw_scsiop_inquiry_complete(tw_dev, request_id);
2142                                        break;
2143                                case READ_CAPACITY:
2144                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");
2145                                        error = tw_scsiop_read_capacity_complete(tw_dev, request_id);
2146                                        break;
2147                                case MODE_SENSE:
2148                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n");
2149                                        error = tw_scsiop_mode_sense_complete(tw_dev, request_id);
2150                                        break;
2151                                case SYNCHRONIZE_CACHE:
2152                                        dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n");
2153                                        break;
2154                                default:
2155                                        printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n");
2156                                        error = 1;
2157                                }
2158
2159                                /* If no error command was a success */
2160                                if (error == 0) {
2161                                        tw_dev->srb[request_id]->result = (DID_OK << 16);
2162                                }
2163
2164                                /* If error, command failed */
2165                                if (error == 1) {
2166                                        /* Ask for a host reset */
2167                                        tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
2168                                }
2169
2170                                /* Now complete the io */
2171                                if ((error != TW_ISR_DONT_COMPLETE)) {
2172                                        scsi_dma_unmap(tw_dev->srb[request_id]);
2173                                        tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
2174                                        tw_dev->state[request_id] = TW_S_COMPLETED;
2175                                        tw_state_request_finish(tw_dev, request_id);
2176                                        tw_dev->posted_request_count--;
2177                                }
2178                        }
2179                                
2180                        /* Check for valid status after each drain */
2181                        status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2182                        if (tw_check_bits(status_reg_value)) {
2183                                dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2184                                if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2185                                        TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2186                                        goto tw_interrupt_bail;
2187                                }
2188                        }
2189                }
2190        }
2191
2192tw_interrupt_bail:
2193        spin_unlock(tw_dev->host->host_lock);
2194        return IRQ_RETVAL(handled);
2195} /* End tw_interrupt() */
2196
2197/* This function tells the controller to shut down */
2198static void __tw_shutdown(TW_Device_Extension *tw_dev)
2199{
2200        /* Disable interrupts */
2201        TW_DISABLE_INTERRUPTS(tw_dev);
2202
2203        /* Free up the IRQ */
2204        free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
2205
2206        printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
2207
2208        /* Tell the card we are shutting down */
2209        if (tw_initconnection(tw_dev, 1)) {
2210                printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n");
2211        } else {
2212                printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n");
2213        }
2214
2215        /* Clear all interrupts just before exit */
2216        TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2217} /* End __tw_shutdown() */
2218
2219/* Wrapper for __tw_shutdown */
2220static void tw_shutdown(struct pci_dev *pdev)
2221{
2222        struct Scsi_Host *host = pci_get_drvdata(pdev);
2223        TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2224
2225        __tw_shutdown(tw_dev);
2226} /* End tw_shutdown() */
2227
2228/* This function gets called when a disk is coming online */
2229static int tw_slave_configure(struct scsi_device *sdev)
2230{
2231        /* Force 60 second timeout */
2232        blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
2233
2234        return 0;
2235} /* End tw_slave_configure() */
2236
2237static struct scsi_host_template driver_template = {
2238        .module                 = THIS_MODULE,
2239        .name                   = "3ware Storage Controller",
2240        .queuecommand           = tw_scsi_queue,
2241        .eh_host_reset_handler  = tw_scsi_eh_reset,
2242        .bios_param             = tw_scsi_biosparam,
2243        .change_queue_depth     = scsi_change_queue_depth,
2244        .can_queue              = TW_Q_LENGTH-2,
2245        .slave_configure        = tw_slave_configure,
2246        .this_id                = -1,
2247        .sg_tablesize           = TW_MAX_SGL_LENGTH,
2248        .max_sectors            = TW_MAX_SECTORS,
2249        .cmd_per_lun            = TW_MAX_CMDS_PER_LUN,  
2250        .shost_attrs            = tw_host_attrs,
2251        .emulated               = 1,
2252        .no_write_same          = 1,
2253};
2254
2255/* This function will probe and initialize a card */
2256static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
2257{
2258        struct Scsi_Host *host = NULL;
2259        TW_Device_Extension *tw_dev;
2260        int retval = -ENODEV;
2261
2262        retval = pci_enable_device(pdev);
2263        if (retval) {
2264                printk(KERN_WARNING "3w-xxxx: Failed to enable pci device.");
2265                goto out_disable_device;
2266        }
2267
2268        pci_set_master(pdev);
2269
2270        retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
2271        if (retval) {
2272                printk(KERN_WARNING "3w-xxxx: Failed to set dma mask.");
2273                goto out_disable_device;
2274        }
2275
2276        host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
2277        if (!host) {
2278                printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension.");
2279                retval = -ENOMEM;
2280                goto out_disable_device;
2281        }
2282        tw_dev = (TW_Device_Extension *)host->hostdata;
2283
2284        /* Save values to device extension */
2285        tw_dev->host = host;
2286        tw_dev->tw_pci_dev = pdev;
2287
2288        if (tw_initialize_device_extension(tw_dev)) {
2289                printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
2290                retval = -ENOMEM;
2291                goto out_free_device_extension;
2292        }
2293
2294        /* Request IO regions */
2295        retval = pci_request_regions(pdev, "3w-xxxx");
2296        if (retval) {
2297                printk(KERN_WARNING "3w-xxxx: Failed to get mem region.");
2298                goto out_free_device_extension;
2299        }
2300
2301        /* Save base address */
2302        tw_dev->base_addr = pci_resource_start(pdev, 0);
2303        if (!tw_dev->base_addr) {
2304                printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
2305                retval = -ENOMEM;
2306                goto out_release_mem_region;
2307        }
2308
2309        /* Disable interrupts on the card */
2310        TW_DISABLE_INTERRUPTS(tw_dev);
2311
2312        /* Initialize the card */
2313        if (tw_reset_sequence(tw_dev))
2314                goto out_release_mem_region;
2315
2316        /* Set host specific parameters */
2317        host->max_id = TW_MAX_UNITS;
2318        host->max_cmd_len = TW_MAX_CDB_LEN;
2319
2320        /* Luns and channels aren't supported by adapter */
2321        host->max_lun = 0;
2322        host->max_channel = 0;
2323
2324        /* Register the card with the kernel SCSI layer */
2325        retval = scsi_add_host(host, &pdev->dev);
2326        if (retval) {
2327                printk(KERN_WARNING "3w-xxxx: scsi add host failed");
2328                goto out_release_mem_region;
2329        }
2330
2331        pci_set_drvdata(pdev, host);
2332
2333        printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
2334
2335        /* Now setup the interrupt handler */
2336        retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
2337        if (retval) {
2338                printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
2339                goto out_remove_host;
2340        }
2341
2342        tw_device_extension_list[tw_device_extension_count] = tw_dev;
2343        tw_device_extension_count++;
2344
2345        /* Re-enable interrupts on the card */
2346        TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2347
2348        /* Finally, scan the host */
2349        scsi_scan_host(host);
2350
2351        if (twe_major == -1) {
2352                if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0)
2353                        printk(KERN_WARNING "3w-xxxx: Failed to register character device.");
2354        }
2355        return 0;
2356
2357out_remove_host:
2358        scsi_remove_host(host);
2359out_release_mem_region:
2360        pci_release_regions(pdev);
2361out_free_device_extension:
2362        tw_free_device_extension(tw_dev);
2363        scsi_host_put(host);
2364out_disable_device:
2365        pci_disable_device(pdev);
2366
2367        return retval;
2368} /* End tw_probe() */
2369
2370/* This function is called to remove a device */
2371static void tw_remove(struct pci_dev *pdev)
2372{
2373        struct Scsi_Host *host = pci_get_drvdata(pdev);
2374        TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2375
2376        scsi_remove_host(tw_dev->host);
2377
2378        /* Unregister character device */
2379        if (twe_major >= 0) {
2380                unregister_chrdev(twe_major, "twe");
2381                twe_major = -1;
2382        }
2383
2384        /* Shutdown the card */
2385        __tw_shutdown(tw_dev);
2386
2387        /* Free up the mem region */
2388        pci_release_regions(pdev);
2389
2390        /* Free up device extension resources */
2391        tw_free_device_extension(tw_dev);
2392
2393        scsi_host_put(tw_dev->host);
2394        pci_disable_device(pdev);
2395        tw_device_extension_count--;
2396} /* End tw_remove() */
2397
2398/* PCI Devices supported by this driver */
2399static struct pci_device_id tw_pci_tbl[] = {
2400        { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000,
2401          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2402        { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000,
2403          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2404        { }
2405};
2406MODULE_DEVICE_TABLE(pci, tw_pci_tbl);
2407
2408/* pci_driver initializer */
2409static struct pci_driver tw_driver = {
2410        .name           = "3w-xxxx",
2411        .id_table       = tw_pci_tbl,
2412        .probe          = tw_probe,
2413        .remove         = tw_remove,
2414        .shutdown       = tw_shutdown,
2415};
2416
2417/* This function is called on driver initialization */
2418static int __init tw_init(void)
2419{
2420        printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
2421
2422        return pci_register_driver(&tw_driver);
2423} /* End tw_init() */
2424
2425/* This function is called on driver exit */
2426static void __exit tw_exit(void)
2427{
2428        pci_unregister_driver(&tw_driver);
2429} /* End tw_exit() */
2430
2431module_init(tw_init);
2432module_exit(tw_exit);
2433
2434