/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
 * Copyright (C) 2007-2015 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.broadcom.com                                                *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/

#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>

#include <linux/nvme-fc-driver.h>

#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_scsi.h"
#include "lpfc_nvme.h"
#include "lpfc_nvmet.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"
#include "lpfc_compat.h"
#include "lpfc_debugfs.h"
#include "lpfc_bsg.h"

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/*
 * debugfs interface
 *
 * To access this interface the user should:
 * # mount -t debugfs none /sys/kernel/debug
 *
 * The lpfc debugfs directory hierarchy is:
 * /sys/kernel/debug/lpfc/fnX/vportY
 * where X is the lpfc hba function unique_id
 * where Y is the vport VPI on that hba
 *
 * Debugging services available per vport:
 * discovery_trace
 * This is an ACSII readable file that contains a trace of the last
 * lpfc_debugfs_max_disc_trc events that happened on a specific vport.
 * See lpfc_debugfs.h for different categories of  discovery events.
 * To enable the discovery trace, the following module parameters must be set:
 * lpfc_debugfs_enable=1         Turns on lpfc debugfs filesystem support
 * lpfc_debugfs_max_disc_trc=X   Where X is the event trace depth for
 *                               EACH vport. X MUST also be a power of 2.
 * lpfc_debugfs_mask_disc_trc=Y  Where Y is an event mask as defined in
 *                               lpfc_debugfs.h .
 *
 * slow_ring_trace
 * This is an ACSII readable file that contains a trace of the last
 * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA.
 * To enable the slow ring trace, the following module parameters must be set:
 * lpfc_debugfs_enable=1         Turns on lpfc debugfs filesystem support
 * lpfc_debugfs_max_slow_ring_trc=X   Where X is the event trace depth for
 *                               the HBA. X MUST also be a power of 2.
 */
static int lpfc_debugfs_enable = 1;
module_param(lpfc_debugfs_enable, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_disc_trc;
module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc,
        "Set debugfs discovery trace depth");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_slow_ring_trc;
module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
        "Set debugfs slow ring trace depth");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_nvmeio_trc;
module_param(lpfc_debugfs_max_nvmeio_trc, int, 0444);
MODULE_PARM_DESC(lpfc_debugfs_max_nvmeio_trc,
                 "Set debugfs NVME IO trace depth");

static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
        "Set debugfs discovery trace mask");

#include <linux/debugfs.h>

static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
static unsigned long lpfc_debugfs_start_time = 0L;

/* iDiag */
static struct lpfc_idiag idiag;

/**
 * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
 * @vport: The vport to gather the log info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine gathers the lpfc discovery debugfs data from the @vport and
 * dumps it to @buf up to @size number of bytes. It will start at the next entry
 * in the log and process the log until the end of the buffer. Then it will
 * gather from the beginning of the log and process until the current entry.
 *
 * Notes:
 * Discovery logging will be disabled while while this routine dumps the log.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)
{
        int i, index, len, enable;
        uint32_t ms;
        struct lpfc_debugfs_trc *dtp;
        char *buffer;

        buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL);
        if (!buffer)
                return 0;

        enable = lpfc_debugfs_enable;
        lpfc_debugfs_enable = 0;

        len = 0;
        index = (atomic_read(&vport->disc_trc_cnt) + 1) &
                (lpfc_debugfs_max_disc_trc - 1);
        for (i = index; i < lpfc_debugfs_max_disc_trc; i++) {
                dtp = vport->disc_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }
        for (i = 0; i < index; i++) {
                dtp = vport->disc_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }

        lpfc_debugfs_enable = enable;
        kfree(buffer);

        return len;
}

/**
 * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
 * @phba: The HBA to gather the log info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine gathers the lpfc slow ring debugfs data from the @phba and
 * dumps it to @buf up to @size number of bytes. It will start at the next entry
 * in the log and process the log until the end of the buffer. Then it will
 * gather from the beginning of the log and process until the current entry.
 *
 * Notes:
 * Slow ring logging will be disabled while while this routine dumps the log.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)
{
        int i, index, len, enable;
        uint32_t ms;
        struct lpfc_debugfs_trc *dtp;
        char *buffer;

        buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL);
        if (!buffer)
                return 0;

        enable = lpfc_debugfs_enable;
        lpfc_debugfs_enable = 0;

        len = 0;
        index = (atomic_read(&phba->slow_ring_trc_cnt) + 1) &
                (lpfc_debugfs_max_slow_ring_trc - 1);
        for (i = index; i < lpfc_debugfs_max_slow_ring_trc; i++) {
                dtp = phba->slow_ring_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }
        for (i = 0; i < index; i++) {
                dtp = phba->slow_ring_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }

        lpfc_debugfs_enable = enable;
        kfree(buffer);

        return len;
}

static int lpfc_debugfs_last_hbq = -1;

/**
 * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the host buffer queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hbq state will be
 * dumped to @buf first and then info on each hbq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hbq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured HBQ each time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, j, found, posted, low;
        uint32_t phys, raw_index, getidx;
        struct lpfc_hbq_init *hip;
        struct hbq_s *hbqs;
        struct lpfc_hbq_entry *hbqe;
        struct lpfc_dmabuf *d_buf;
        struct hbq_dmabuf *hbq_buf;

        if (phba->sli_rev != 3)
                return 0;

        spin_lock_irq(&phba->hbalock);

        /* toggle between multiple hbqs, if any */
        i = lpfc_sli_hbq_count();
        if (i > 1) {
                 lpfc_debugfs_last_hbq++;
                 if (lpfc_debugfs_last_hbq >= i)
                        lpfc_debugfs_last_hbq = 0;
        }
        else
                lpfc_debugfs_last_hbq = 0;

        i = lpfc_debugfs_last_hbq;

        len +=  scnprintf(buf+len, size-len, "HBQ %d Info\n", i);

        hbqs =  &phba->hbqs[i];
        posted = 0;
        list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list)
                posted++;

        hip =  lpfc_hbq_defs[i];
        len +=  scnprintf(buf+len, size-len,
                "idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n",
                hip->hbq_index, hip->profile, hip->rn,
                hip->buffer_count, hip->init_count, hip->add_count, posted);

        raw_index = phba->hbq_get[i];
        getidx = le32_to_cpu(raw_index);
        len +=  scnprintf(buf+len, size-len,
                "entries:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n",
                hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx,
                hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx);

        hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt;
        for (j=0; j<hbqs->entry_count; j++) {
                len +=  scnprintf(buf+len, size-len,
                        "%03d: %08x %04x %05x ", j,
                        le32_to_cpu(hbqe->bde.addrLow),
                        le32_to_cpu(hbqe->bde.tus.w),
                        le32_to_cpu(hbqe->buffer_tag));
                i = 0;
                found = 0;

                /* First calculate if slot has an associated posted buffer */
                low = hbqs->hbqPutIdx - posted;
                if (low >= 0) {
                        if ((j >= hbqs->hbqPutIdx) || (j < low)) {
                                len +=  scnprintf(buf + len, size - len,
                                                "Unused\n");
                                goto skipit;
                        }
                }
                else {
                        if ((j >= hbqs->hbqPutIdx) &&
                                (j < (hbqs->entry_count+low))) {
                                len +=  scnprintf(buf + len, size - len,
                                                "Unused\n");
                                goto skipit;
                        }
                }

                /* Get the Buffer info for the posted buffer */
                list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) {
                        hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
                        phys = ((uint64_t)hbq_buf->dbuf.phys & 0xffffffff);
                        if (phys == le32_to_cpu(hbqe->bde.addrLow)) {
                                len +=  scnprintf(buf+len, size-len,
                                        "Buf%d: x%px %06x\n", i,
                                        hbq_buf->dbuf.virt, hbq_buf->tag);
                                found = 1;
                                break;
                        }
                        i++;
                }
                if (!found) {
                        len +=  scnprintf(buf+len, size-len, "No DMAinfo?\n");
                }
skipit:
                hbqe++;
                if (len > LPFC_HBQINFO_SIZE - 54)
                        break;
        }
        spin_unlock_irq(&phba->hbalock);
        return len;
}

static int lpfc_debugfs_last_xripool;

/**
 * lpfc_debugfs_common_xri_data - Dump Hardware Queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the Hardware Queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hdwq state will be
 * dumped to @buf first and then info on each hdwq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hdwq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured Hardware Queue each
 * time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_commonxripools_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_sli4_hdw_queue *qp;
        int len = 0;
        int i, out;
        unsigned long iflag;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                if (len > (LPFC_DUMP_MULTIXRIPOOL_SIZE - 80))
                        break;
                qp = &phba->sli4_hba.hdwq[lpfc_debugfs_last_xripool];

                len += scnprintf(buf + len, size - len, "HdwQ %d Info ", i);
                spin_lock_irqsave(&qp->abts_io_buf_list_lock, iflag);
                spin_lock(&qp->io_buf_list_get_lock);
                spin_lock(&qp->io_buf_list_put_lock);
                out = qp->total_io_bufs - (qp->get_io_bufs + qp->put_io_bufs +
                        qp->abts_scsi_io_bufs + qp->abts_nvme_io_bufs);
                len += scnprintf(buf + len, size - len,
                                 "tot:%d get:%d put:%d mt:%d "
                                 "ABTS scsi:%d nvme:%d Out:%d\n",
                        qp->total_io_bufs, qp->get_io_bufs, qp->put_io_bufs,
                        qp->empty_io_bufs, qp->abts_scsi_io_bufs,
                        qp->abts_nvme_io_bufs, out);
                spin_unlock(&qp->io_buf_list_put_lock);
                spin_unlock(&qp->io_buf_list_get_lock);
                spin_unlock_irqrestore(&qp->abts_io_buf_list_lock, iflag);

                lpfc_debugfs_last_xripool++;
                if (lpfc_debugfs_last_xripool >= phba->cfg_hdw_queue)
                        lpfc_debugfs_last_xripool = 0;
        }

        return len;
}

/**
 * lpfc_debugfs_multixripools_data - Display multi-XRI pools information
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine displays current multi-XRI pools information including XRI
 * count in public, private and txcmplq. It also displays current high and
 * low watermark.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_multixripools_data(struct lpfc_hba *phba, char *buf, int size)
{
        u32 i;
        u32 hwq_count;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;
        struct lpfc_pvt_pool *pvt_pool;
        struct lpfc_pbl_pool *pbl_pool;
        u32 txcmplq_cnt;
        char tmp[LPFC_DEBUG_OUT_LINE_SZ] = {0};

        if (phba->sli_rev != LPFC_SLI_REV4)
                return 0;

        if (!phba->sli4_hba.hdwq)
                return 0;

        if (!phba->cfg_xri_rebalancing) {
                i = lpfc_debugfs_commonxripools_data(phba, buf, size);
                return i;
        }

        /*
         * Pbl: Current number of free XRIs in public pool
         * Pvt: Current number of free XRIs in private pool
         * Busy: Current number of outstanding XRIs
         * HWM: Current high watermark
         * pvt_empty: Incremented by 1 when IO submission fails (no xri)
         * pbl_empty: Incremented by 1 when all pbl_pool are empty during
         *            IO submission
         */
        scnprintf(tmp, sizeof(tmp),
                  "HWQ:  Pbl  Pvt Busy  HWM |  pvt_empty  pbl_empty ");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

#ifdef LPFC_MXP_STAT
        /*
         * MAXH: Max high watermark seen so far
         * above_lmt: Incremented by 1 if xri_owned > xri_limit during
         *            IO submission
         * below_lmt: Incremented by 1 if xri_owned <= xri_limit  during
         *            IO submission
         * locPbl_hit: Incremented by 1 if successfully get a batch of XRI from
         *             local pbl_pool
         * othPbl_hit: Incremented by 1 if successfully get a batch of XRI from
         *             other pbl_pool
         */
        scnprintf(tmp, sizeof(tmp),
                  "MAXH  above_lmt  below_lmt locPbl_hit othPbl_hit");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

        /*
         * sPbl: snapshot of Pbl 15 sec after stat gets cleared
         * sPvt: snapshot of Pvt 15 sec after stat gets cleared
         * sBusy: snapshot of Busy 15 sec after stat gets cleared
         */
        scnprintf(tmp, sizeof(tmp),
                  " | sPbl sPvt sBusy");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);
#endif

        scnprintf(tmp, sizeof(tmp), "\n");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

        hwq_count = phba->cfg_hdw_queue;
        for (i = 0; i < hwq_count; i++) {
                qp = &phba->sli4_hba.hdwq[i];
                multixri_pool = qp->p_multixri_pool;
                if (!multixri_pool)
                        continue;
                pbl_pool = &multixri_pool->pbl_pool;
                pvt_pool = &multixri_pool->pvt_pool;
                txcmplq_cnt = qp->io_wq->pring->txcmplq_cnt;

                scnprintf(tmp, sizeof(tmp),
                          "%03d: %4d %4d %4d %4d | %10d %10d ",
                          i, pbl_pool->count, pvt_pool->count,
                          txcmplq_cnt, pvt_pool->high_watermark,
                          qp->empty_io_bufs, multixri_pool->pbl_empty_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;

#ifdef LPFC_MXP_STAT
                scnprintf(tmp, sizeof(tmp),
                          "%4d %10d %10d %10d %10d",
                          multixri_pool->stat_max_hwm,
                          multixri_pool->above_limit_count,
                          multixri_pool->below_limit_count,
                          multixri_pool->local_pbl_hit_count,
                          multixri_pool->other_pbl_hit_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;

                scnprintf(tmp, sizeof(tmp),
                          " | %4d %4d %5d",
                          multixri_pool->stat_pbl_count,
                          multixri_pool->stat_pvt_count,
                          multixri_pool->stat_busy_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;
#endif

                scnprintf(tmp, sizeof(tmp), "\n");
                if (strlcat(buf, tmp, size) >= size)
                        break;
        }
        return strnlen(buf, size);
}


#ifdef LPFC_HDWQ_LOCK_STAT
static int lpfc_debugfs_last_lock;

/**
 * lpfc_debugfs_lockstat_data - Dump Hardware Queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the Hardware Queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hdwq state will be
 * dumped to @buf first and then info on each hdwq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hdwq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured Hardware Queue each
 * time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_lockstat_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_sli4_hdw_queue *qp;
        int len = 0;
        int i;

        if (phba->sli_rev != LPFC_SLI_REV4)
                return 0;

        if (!phba->sli4_hba.hdwq)
                return 0;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                if (len > (LPFC_HDWQINFO_SIZE - 100))
                        break;
                qp = &phba->sli4_hba.hdwq[lpfc_debugfs_last_lock];

                len += scnprintf(buf + len, size - len, "HdwQ %03d Lock ", i);
                if (phba->cfg_xri_rebalancing) {
                        len += scnprintf(buf + len, size - len,
                                         "get_pvt:%d mv_pvt:%d "
                                         "mv2pub:%d mv2pvt:%d "
                                         "put_pvt:%d put_pub:%d wq:%d\n",
                                         qp->lock_conflict.alloc_pvt_pool,
                                         qp->lock_conflict.mv_from_pvt_pool,
                                         qp->lock_conflict.mv_to_pub_pool,
                                         qp->lock_conflict.mv_to_pvt_pool,
                                         qp->lock_conflict.free_pvt_pool,
                                         qp->lock_conflict.free_pub_pool,
                                         qp->lock_conflict.wq_access);
                } else {
                        len += scnprintf(buf + len, size - len,
                                         "get:%d put:%d free:%d wq:%d\n",
                                         qp->lock_conflict.alloc_xri_get,
                                         qp->lock_conflict.alloc_xri_put,
                                         qp->lock_conflict.free_xri,
                                         qp->lock_conflict.wq_access);
                }

                lpfc_debugfs_last_lock++;
                if (lpfc_debugfs_last_lock >= phba->cfg_hdw_queue)
                        lpfc_debugfs_last_lock = 0;
        }

        return len;
}
#endif

static int lpfc_debugfs_last_hba_slim_off;

/**
 * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
 * @phba: The HBA to gather SLIM info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current contents of HBA SLIM for the HBA associated
 * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data.
 *
 * Notes:
 * This routine will only dump up to 1024 bytes of data each time called and
 * should be called multiple times to dump the entire HBA SLIM.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, off;
        uint32_t *ptr;
        char *buffer;

        buffer = kmalloc(1024, GFP_KERNEL);
        if (!buffer)
                return 0;

        off = 0;
        spin_lock_irq(&phba->hbalock);

        len +=  scnprintf(buf+len, size-len, "HBA SLIM\n");
        lpfc_memcpy_from_slim(buffer,
                phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);

        ptr = (uint32_t *)&buffer[0];
        off = lpfc_debugfs_last_hba_slim_off;

        /* Set it up for the next time */
        lpfc_debugfs_last_hba_slim_off += 1024;
        if (lpfc_debugfs_last_hba_slim_off >= 4096)
                lpfc_debugfs_last_hba_slim_off = 0;

        i = 1024;
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        spin_unlock_irq(&phba->hbalock);
        kfree(buffer);

        return len;
}

/**
 * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
 * @phba: The HBA to gather Host SLIM info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current contents of host SLIM for the host associated
 * with @phba to @buf up to @size bytes of data. The dump will contain the
 * Mailbox, PCB, Rings, and Registers that are located in host memory.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, off;
        uint32_t word0, word1, word2, word3;
        uint32_t *ptr;
        struct lpfc_pgp *pgpp;
        struct lpfc_sli *psli = &phba->sli;
        struct lpfc_sli_ring *pring;

        off = 0;
        spin_lock_irq(&phba->hbalock);

        len +=  scnprintf(buf+len, size-len, "SLIM Mailbox\n");
        ptr = (uint32_t *)phba->slim2p.virt;
        i = sizeof(MAILBOX_t);
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        len +=  scnprintf(buf+len, size-len, "SLIM PCB\n");
        ptr = (uint32_t *)phba->pcb;
        i = sizeof(PCB_t);
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        if (phba->sli_rev <= LPFC_SLI_REV3) {
                for (i = 0; i < 4; i++) {
                        pgpp = &phba->port_gp[i];
                        pring = &psli->sli3_ring[i];
                        len +=  scnprintf(buf+len, size-len,
                                         "Ring %d: CMD GetInx:%d "
                                         "(Max:%d Next:%d "
                                         "Local:%d flg:x%x)  "
                                         "RSP PutInx:%d Max:%d\n",
                                         i, pgpp->cmdGetInx,
                                         pring->sli.sli3.numCiocb,
                                         pring->sli.sli3.next_cmdidx,
                                         pring->sli.sli3.local_getidx,
                                         pring->flag, pgpp->rspPutInx,
                                         pring->sli.sli3.numRiocb);
                }

                word0 = readl(phba->HAregaddr);
                word1 = readl(phba->CAregaddr);
                word2 = readl(phba->HSregaddr);
                word3 = readl(phba->HCregaddr);
                len +=  scnprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
                                 "HC:%08x\n", word0, word1, word2, word3);
        }
        spin_unlock_irq(&phba->hbalock);
        return len;
}

/**
 * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current target node list associated with @vport to
 * @buf up to @size bytes of data. Each node entry in the dump will contain a
 * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)
{
        int len = 0;
        int i, iocnt, outio, cnt;
        struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
        struct lpfc_hba  *phba = vport->phba;
        struct lpfc_nodelist *ndlp;
        unsigned char *statep;
        struct nvme_fc_local_port *localport;
        struct nvme_fc_remote_port *nrport = NULL;
        struct lpfc_nvme_rport *rport;

        cnt = (LPFC_NODELIST_SIZE / LPFC_NODELIST_ENTRY_SIZE);
        outio = 0;

        len += scnprintf(buf+len, size-len, "\nFCP Nodelist Entries ...\n");
        spin_lock_irq(shost->host_lock);
        list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
                iocnt = 0;
                if (!cnt) {
                        len +=  scnprintf(buf+len, size-len,
                                "Missing Nodelist Entries\n");
                        break;
                }
                cnt--;
                switch (ndlp->nlp_state) {
                case NLP_STE_UNUSED_NODE:
                        statep = "UNUSED";
                        break;
                case NLP_STE_PLOGI_ISSUE:
                        statep = "PLOGI ";
                        break;
                case NLP_STE_ADISC_ISSUE:
                        statep = "ADISC ";
                        break;
                case NLP_STE_REG_LOGIN_ISSUE:
                        statep = "REGLOG";
                        break;
                case NLP_STE_PRLI_ISSUE:
                        statep = "PRLI  ";
                        break;
                case NLP_STE_LOGO_ISSUE:
                        statep = "LOGO  ";
                        break;
                case NLP_STE_UNMAPPED_NODE:
                        statep = "UNMAP ";
                        iocnt = 1;
                        break;
                case NLP_STE_MAPPED_NODE:
                        statep = "MAPPED";
                        iocnt = 1;
                        break;
                case NLP_STE_NPR_NODE:
                        statep = "NPR   ";
                        break;
                default:
                        statep = "UNKNOWN";
                }
                len += scnprintf(buf+len, size-len, "%s DID:x%06x ",
                                statep, ndlp->nlp_DID);
                len += scnprintf(buf+len, size-len,
                                "WWPN x%llx ",
                                wwn_to_u64(ndlp->nlp_portname.u.wwn));
                len += scnprintf(buf+len, size-len,
                                "WWNN x%llx ",
                                wwn_to_u64(ndlp->nlp_nodename.u.wwn));
                if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
                        len += scnprintf(buf+len, size-len, "RPI:%03d ",
                                        ndlp->nlp_rpi);
                else
                        len += scnprintf(buf+len, size-len, "RPI:none ");
                len +=  scnprintf(buf+len, size-len, "flag:x%08x ",
                        ndlp->nlp_flag);
                if (!ndlp->nlp_type)
                        len += scnprintf(buf+len, size-len, "UNKNOWN_TYPE ");
                if (ndlp->nlp_type & NLP_FC_NODE)
                        len += scnprintf(buf+len, size-len, "FC_NODE ");
                if (ndlp->nlp_type & NLP_FABRIC) {
                        len += scnprintf(buf+len, size-len, "FABRIC ");
                        iocnt = 0;
                }
                if (ndlp->nlp_type & NLP_FCP_TARGET)
                        len += scnprintf(buf+len, size-len, "FCP_TGT sid:%d ",
                                ndlp->nlp_sid);
                if (ndlp->nlp_type & NLP_FCP_INITIATOR)
                        len += scnprintf(buf+len, size-len, "FCP_INITIATOR ");
                if (ndlp->nlp_type & NLP_NVME_TARGET)
                        len += scnprintf(buf + len,
                                        size - len, "NVME_TGT sid:%d ",
                                        NLP_NO_SID);
                if (ndlp->nlp_type & NLP_NVME_INITIATOR)
                        len += scnprintf(buf + len,
                                        size - len, "NVME_INITIATOR ");
                len += scnprintf(buf+len, size-len, "usgmap:%x ",
                        ndlp->nlp_usg_map);
                len += scnprintf(buf+len, size-len, "refcnt:%x",
                        kref_read(&ndlp->kref));
                if (iocnt) {
                        i = atomic_read(&ndlp->cmd_pending);
                        len += scnprintf(buf + len, size - len,
                                        " OutIO:x%x Qdepth x%x",
                                        i, ndlp->cmd_qdepth);
                        outio += i;
                }
                len += scnprintf(buf + len, size - len, "defer:%x ",
                        ndlp->nlp_defer_did);
                len +=  scnprintf(buf+len, size-len, "\n");
        }
        spin_unlock_irq(shost->host_lock);

        len += scnprintf(buf + len, size - len,
                        "\nOutstanding IO x%x\n",  outio);

        if (phba->nvmet_support && phba->targetport && (vport == phba->pport)) {
                len += scnprintf(buf + len, size - len,
                                "\nNVME Targetport Entry ...\n");

                /* Port state is only one of two values for now. */
                if (phba->targetport->port_id)
                        statep = "REGISTERED";
                else
                        statep = "INIT";
                len += scnprintf(buf + len, size - len,
                                "TGT WWNN x%llx WWPN x%llx State %s\n",
                                wwn_to_u64(vport->fc_nodename.u.wwn),
                                wwn_to_u64(vport->fc_portname.u.wwn),
                                statep);
                len += scnprintf(buf + len, size - len,
                                "    Targetport DID x%06x\n",
                                phba->targetport->port_id);
                goto out_exit;
        }

        len += scnprintf(buf + len, size - len,
                                "\nNVME Lport/Rport Entries ...\n");

        localport = vport->localport;
        if (!localport)
                goto out_exit;

        spin_lock_irq(shost->host_lock);

        /* Port state is only one of two values for now. */
        if (localport->port_id)
                statep = "ONLINE";
        else
                statep = "UNKNOWN ";

        len += scnprintf(buf + len, size - len,
                        "Lport DID x%06x PortState %s\n",
                        localport->port_id, statep);

        len += scnprintf(buf + len, size - len, "\tRport List:\n");
        list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
                /* local short-hand pointer. */
                spin_lock(&phba->hbalock);
                rport = lpfc_ndlp_get_nrport(ndlp);
                if (rport)
                        nrport = rport->remoteport;
                else
                        nrport = NULL;
                spin_unlock(&phba->hbalock);
                if (!nrport)
                        continue;

                /* Port state is only one of two values for now. */
                switch (nrport->port_state) {
                case FC_OBJSTATE_ONLINE:
                        statep = "ONLINE";
                        break;
                case FC_OBJSTATE_UNKNOWN:
                        statep = "UNKNOWN ";
                        break;
                default:
                        statep = "UNSUPPORTED";
                        break;
                }

                /* Tab in to show lport ownership. */
                len += scnprintf(buf + len, size - len,
                                "\t%s Port ID:x%06x ",
                                statep, nrport->port_id);
                len += scnprintf(buf + len, size - len, "WWPN x%llx ",
                                nrport->port_name);
                len += scnprintf(buf + len, size - len, "WWNN x%llx ",
                                nrport->node_name);

                /* An NVME rport can have multiple roles. */
                if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR)
                        len +=  scnprintf(buf + len, size - len,
                                         "INITIATOR ");
                if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET)
                        len +=  scnprintf(buf + len, size - len,
                                         "TARGET ");

                if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY)
                        len +=  scnprintf(buf + len, size - len,
                                         "DISCSRVC ");
                if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |
                                          FC_PORT_ROLE_NVME_TARGET |
                                          FC_PORT_ROLE_NVME_DISCOVERY))
                        len +=  scnprintf(buf + len, size - len,
                                         "UNKNOWN ROLE x%x",
                                         nrport->port_role);
                /* Terminate the string. */
                len +=  scnprintf(buf + len, size - len, "\n");
        }

        spin_unlock_irq(shost->host_lock);
 out_exit:
        return len;
}

/**
 * lpfc_debugfs_nvmestat_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_nvmet_tgtport *tgtp;
        struct lpfc_nvmet_rcv_ctx *ctxp, *next_ctxp;
        struct nvme_fc_local_port *localport;
        struct lpfc_fc4_ctrl_stat *cstat;
        struct lpfc_nvme_lport *lport;
        uint64_t data1, data2, data3;
        uint64_t tot, totin, totout;
        int cnt, i;
        int len = 0;

        if (phba->nvmet_support) {
                if (!phba->targetport)
                        return len;
                tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
                len += scnprintf(buf + len, size - len,
                                "\nNVME Targetport Statistics\n");

                len += scnprintf(buf + len, size - len,
                                "LS: Rcv %08x Drop %08x Abort %08x\n",
                                atomic_read(&tgtp->rcv_ls_req_in),
                                atomic_read(&tgtp->rcv_ls_req_drop),
                                atomic_read(&tgtp->xmt_ls_abort));
                if (atomic_read(&tgtp->rcv_ls_req_in) !=
                    atomic_read(&tgtp->rcv_ls_req_out)) {
                        len += scnprintf(buf + len, size - len,
                                        "Rcv LS: in %08x != out %08x\n",
                                        atomic_read(&tgtp->rcv_ls_req_in),
                                        atomic_read(&tgtp->rcv_ls_req_out));
                }

                len += scnprintf(buf + len, size - len,
                                "LS: Xmt %08x Drop %08x Cmpl %08x\n",
                                atomic_read(&tgtp->xmt_ls_rsp),
                                atomic_read(&tgtp->xmt_ls_drop),
                                atomic_read(&tgtp->xmt_ls_rsp_cmpl));

                len += scnprintf(buf + len, size - len,
                                "LS: RSP Abort %08x xb %08x Err %08x\n",
                                atomic_read(&tgtp->xmt_ls_rsp_aborted),
                                atomic_read(&tgtp->xmt_ls_rsp_xb_set),
                                atomic_read(&tgtp->xmt_ls_rsp_error));

                len += scnprintf(buf + len, size - len,
                                "FCP: Rcv %08x Defer %08x Release %08x "
                                "Drop %08x\n",
                                atomic_read(&tgtp->rcv_fcp_cmd_in),
                                atomic_read(&tgtp->rcv_fcp_cmd_defer),
                                atomic_read(&tgtp->xmt_fcp_release),
                                atomic_read(&tgtp->rcv_fcp_cmd_drop));

                if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=
                    atomic_read(&tgtp->rcv_fcp_cmd_out)) {
                        len += scnprintf(buf + len, size - len,
                                        "Rcv FCP: in %08x != out %08x\n",
                                        atomic_read(&tgtp->rcv_fcp_cmd_in),
                                        atomic_read(&tgtp->rcv_fcp_cmd_out));
                }

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp: read %08x readrsp %08x "
                                "write %08x rsp %08x\n",
                                atomic_read(&tgtp->xmt_fcp_read),
                                atomic_read(&tgtp->xmt_fcp_read_rsp),
                                atomic_read(&tgtp->xmt_fcp_write),
                                atomic_read(&tgtp->xmt_fcp_rsp));

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp Cmpl: %08x err %08x drop %08x\n",
                                atomic_read(&tgtp->xmt_fcp_rsp_cmpl),
                                atomic_read(&tgtp->xmt_fcp_rsp_error),
                                atomic_read(&tgtp->xmt_fcp_rsp_drop));

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp Abort: %08x xb %08x xricqe  %08x\n",
                                atomic_read(&tgtp->xmt_fcp_rsp_aborted),
                                atomic_read(&tgtp->xmt_fcp_rsp_xb_set),
                                atomic_read(&tgtp->xmt_fcp_xri_abort_cqe));

                len += scnprintf(buf + len, size - len,
                                "ABORT: Xmt %08x Cmpl %08x\n",
                                atomic_read(&tgtp->xmt_fcp_abort),
                                atomic_read(&tgtp->xmt_fcp_abort_cmpl));

                len += scnprintf(buf + len, size - len,
                                "ABORT: Sol %08x  Usol %08x Err %08x Cmpl %08x",
                                atomic_read(&tgtp->xmt_abort_sol),
                                atomic_read(&tgtp->xmt_abort_unsol),
                                atomic_read(&tgtp->xmt_abort_rsp),
                                atomic_read(&tgtp->xmt_abort_rsp_error));

                len +=  scnprintf(buf + len, size - len, "\n");

                cnt = 0;
                spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                list_for_each_entry_safe(ctxp, next_ctxp,
                                &phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
                                list) {
                        cnt++;
                }
                spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                if (cnt) {
                        len += scnprintf(buf + len, size - len,
                                        "ABORT: %d ctx entries\n", cnt);
                        spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                        list_for_each_entry_safe(ctxp, next_ctxp,
                                    &phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
                                    list) {
                                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ))
                                        break;
                                len += scnprintf(buf + len, size - len,
                                                "Entry: oxid %x state %x "
                                                "flag %x\n",
                                                ctxp->oxid, ctxp->state,
                                                ctxp->flag);
                        }
                        spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                }

                /* Calculate outstanding IOs */
                tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
                tot += atomic_read(&tgtp->xmt_fcp_release);
                tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;

                len += scnprintf(buf + len, size - len,
                                "IO_CTX: %08x  WAIT: cur %08x tot %08x\n"
                                "CTX Outstanding %08llx\n",
                                phba->sli4_hba.nvmet_xri_cnt,
                                phba->sli4_hba.nvmet_io_wait_cnt,
                                phba->sli4_hba.nvmet_io_wait_total,
                                tot);
        } else {
                if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
                        return len;

                localport = vport->localport;
                if (!localport)
                        return len;
                lport = (struct lpfc_nvme_lport *)localport->private;
                if (!lport)
                        return len;

                len += scnprintf(buf + len, size - len,
                                "\nNVME HDWQ Statistics\n");

                len += scnprintf(buf + len, size - len,
                                "LS: Xmt %016x Cmpl %016x\n",
                                atomic_read(&lport->fc4NvmeLsRequests),
                                atomic_read(&lport->fc4NvmeLsCmpls));

                totin = 0;
                totout = 0;
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        cstat = &phba->sli4_hba.hdwq[i].nvme_cstat;
                        tot = cstat->io_cmpls;
                        totin += tot;
                        data1 = cstat->input_requests;
                        data2 = cstat->output_requests;
                        data3 = cstat->control_requests;
                        totout += (data1 + data2 + data3);

                        /* Limit to 32, debugfs display buffer limitation */
                        if (i >= 32)
                                continue;

                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "HDWQ (%d): Rd %016llx Wr %016llx "
                                        "IO %016llx ",
                                        i, data1, data2, data3);
                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "Cmpl %016llx OutIO %016llx\n",
                                        tot, ((data1 + data2 + data3) - tot));
                }
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "Total FCP Cmpl %016llx Issue %016llx "
                                "OutIO %016llx\n",
                                totin, totout, totout - totin);

                len += scnprintf(buf + len, size - len,
                                "LS Xmt Err: Abrt %08x Err %08x  "
                                "Cmpl Err: xb %08x Err %08x\n",
                                atomic_read(&lport->xmt_ls_abort),
                                atomic_read(&lport->xmt_ls_err),
                                atomic_read(&lport->cmpl_ls_xb),
                                atomic_read(&lport->cmpl_ls_err));

                len += scnprintf(buf + len, size - len,
                                "FCP Xmt Err: noxri %06x nondlp %06x "
                                "qdepth %06x wqerr %06x err %06x Abrt %06x\n",
                                atomic_read(&lport->xmt_fcp_noxri),
                                atomic_read(&lport->xmt_fcp_bad_ndlp),
                                atomic_read(&lport->xmt_fcp_qdepth),
                                atomic_read(&lport->xmt_fcp_wqerr),
                                atomic_read(&lport->xmt_fcp_err),
                                atomic_read(&lport->xmt_fcp_abort));

                len += scnprintf(buf + len, size - len,
                                "FCP Cmpl Err: xb %08x Err %08x\n",
                                atomic_read(&lport->cmpl_fcp_xb),
                                atomic_read(&lport->cmpl_fcp_err));

        }

        return len;
}

/**
 * lpfc_debugfs_scsistat_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the SCSI statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_scsistat_data(struct lpfc_vport *vport, char *buf, int size)
{
        int len;
        struct lpfc_hba *phba = vport->phba;
        struct lpfc_fc4_ctrl_stat *cstat;
        u64 data1, data2, data3;
        u64 tot, totin, totout;
        int i;
        char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0};

        if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ||
            (phba->sli_rev != LPFC_SLI_REV4))
                return 0;

        scnprintf(buf, size, "SCSI HDWQ Statistics\n");

        totin = 0;
        totout = 0;
        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                cstat = &phba->sli4_hba.hdwq[i].scsi_cstat;
                tot = cstat->io_cmpls;
                totin += tot;
                data1 = cstat->input_requests;
                data2 = cstat->output_requests;
                data3 = cstat->control_requests;
                totout += (data1 + data2 + data3);

                scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx "
                          "IO %016llx ", i, data1, data2, data3);
                if (strlcat(buf, tmp, size) >= size)
                        goto buffer_done;

                scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n",
                          tot, ((data1 + data2 + data3) - tot));
                if (strlcat(buf, tmp, size) >= size)
                        goto buffer_done;
        }
        scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx "
                  "OutIO %016llx\n", totin, totout, totout - totin);
        strlcat(buf, tmp, size);

buffer_done:
        len = strnlen(buf, size);

        return len;
}

/**
 * lpfc_debugfs_nvmektime_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        int len = 0;

        if (phba->nvmet_support == 0) {
                /* NVME Initiator */
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "ktime %s: Total Samples: %lld\n",
                                (phba->ktime_on ?  "Enabled" : "Disabled"),
                                phba->ktime_data_samples);
                if (phba->ktime_data_samples == 0)
                        return len;

                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 1: Last NVME Cmd cmpl "
                        "done -to- Start of next NVME cnd (in driver)\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg1_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg1_min,
                        phba->ktime_seg1_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 2: Driver start of NVME cmd "
                        "-to- Firmware WQ doorbell\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg2_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg2_min,
                        phba->ktime_seg2_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 3: Firmware WQ doorbell -to- "
                        "MSI-X ISR cmpl\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg3_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg3_min,
                        phba->ktime_seg3_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 4: MSI-X ISR cmpl -to- "
                        "NVME cmpl done\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg4_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg4_min,
                        phba->ktime_seg4_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Total IO avg time: %08lld\n",
                        div_u64(phba->ktime_seg1_total +
                        phba->ktime_seg2_total  +
                        phba->ktime_seg3_total +
                        phba->ktime_seg4_total,
                        phba->ktime_data_samples));
                return len;
        }

        /* NVME Target */
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "ktime %s: Total Samples: %lld %lld\n",
                        (phba->ktime_on ? "Enabled" : "Disabled"),
                        phba->ktime_data_samples,
                        phba->ktime_status_samples);
        if (phba->ktime_data_samples == 0)
                return len;

        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 1: MSI-X ISR Rcv cmd -to- "
                        "cmd pass to NVME Layer\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg1_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg1_min,
                        phba->ktime_seg1_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 2: cmd pass to NVME Layer- "
                        "-to- Driver rcv cmd OP (action)\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg2_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg2_min,
                        phba->ktime_seg2_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 3: Driver rcv cmd OP -to- "
                        "Firmware WQ doorbell: cmd\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg3_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg3_min,
                        phba->ktime_seg3_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 4: Firmware WQ doorbell: cmd "
                        "-to- MSI-X ISR for cmd cmpl\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg4_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg4_min,
                        phba->ktime_seg4_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 5: MSI-X ISR for cmd cmpl "
                        "-to- NVME layer passed cmd done\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg5_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg5_min,
                        phba->ktime_seg5_max);

        if (phba->ktime_status_samples == 0) {
                len += scnprintf(buf + len, PAGE_SIZE-len,
                                "Total: cmd received by MSI-X ISR "
                                "-to- cmd completed on wire\n");
                len += scnprintf(buf + len, PAGE_SIZE-len,
                                "avg:%08lld min:%08lld "
                                "max %08lld\n",
                                div_u64(phba->ktime_seg10_total,
                                        phba->ktime_data_samples),
                                phba->ktime_seg10_min,
                                phba->ktime_seg10_max);
                return len;
        }

        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 6: NVME layer passed cmd done "
                        "-to- Driver rcv rsp status OP\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg6_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg6_min,
                        phba->ktime_seg6_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 7: Driver rcv rsp status OP "
                        "-to- Firmware WQ doorbell: status\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg7_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg7_min,
                        phba->ktime_seg7_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 8: Firmware WQ doorbell: status"
                        " -to- MSI-X ISR for status cmpl\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg8_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg8_min,
                        phba->ktime_seg8_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 9: MSI-X ISR for status cmpl  "
                        "-to- NVME layer passed status done\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg9_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg9_min,
                        phba->ktime_seg9_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Total: cmd received by MSI-X ISR -to- "
                        "cmd completed on wire\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg10_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg10_min,
                        phba->ktime_seg10_max);
        return len;
}

/**
 * lpfc_debugfs_nvmeio_trc_data - Dump NVME IO trace list to a buffer
 * @phba: The phba to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME IO trace associated with @phba
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_debugfs_nvmeio_trc *dtp;
        int i, state, index, skip;
        int len = 0;

        state = phba->nvmeio_trc_on;

        index = (atomic_read(&phba->nvmeio_trc_cnt) + 1) &
                (phba->nvmeio_trc_size - 1);
        skip = phba->nvmeio_trc_output_idx;

        len += scnprintf(buf + len, size - len,
                        "%s IO Trace %s: next_idx %d skip %d size %d\n",
                        (phba->nvmet_support ? "NVME" : "NVMET"),
                        (state ? "Enabled" : "Disabled"),
                        index, skip, phba->nvmeio_trc_size);

        if (!phba->nvmeio_trc || state)
                return len;

        /* trace MUST bhe off to continue */

        for (i = index; i < phba->nvmeio_trc_size; i++) {
                if (skip) {
                        skip--;
                        continue;
                }
                dtp = phba->nvmeio_trc + i;
                phba->nvmeio_trc_output_idx++;

                if (!dtp->fmt)
                        continue;

                len +=  scnprintf(buf + len, size - len, dtp->fmt,
                        dtp->data1, dtp->data2, dtp->data3);

                if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) {
                        phba->nvmeio_trc_output_idx = 0;
                        len += scnprintf(buf + len, size - len,
                                        "Trace Complete\n");
                        goto out;
                }

                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ)) {
                        len += scnprintf(buf + len, size - len,
                                        "Trace Continue (%d of %d)\n",
                                        phba->nvmeio_trc_output_idx,
                                        phba->nvmeio_trc_size);
                        goto out;
                }
        }
        for (i = 0; i < index; i++) {
                if (skip) {
                        skip--;
                        continue;
                }
                dtp = phba->nvmeio_trc + i;
                phba->nvmeio_trc_output_idx++;

                if (!dtp->fmt)
                        continue;

                len +=  scnprintf(buf + len, size - len, dtp->fmt,
                        dtp->data1, dtp->data2, dtp->data3);

                if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) {
                        phba->nvmeio_trc_output_idx = 0;
                        len += scnprintf(buf + len, size - len,
                                        "Trace Complete\n");
                        goto out;
                }

                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ)) {
                        len += scnprintf(buf + len, size - len,
                                        "Trace Continue (%d of %d)\n",
                                        phba->nvmeio_trc_output_idx,
                                        phba->nvmeio_trc_size);
                        goto out;
                }
        }

        len += scnprintf(buf + len, size - len,
                        "Trace Done\n");
out:
        return len;
}

/**
 * lpfc_debugfs_cpucheck_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_sli4_hdw_queue *qp;
        int i, j, max_cnt;
        int len = 0;
        uint32_t tot_xmt;
        uint32_t tot_rcv;
        uint32_t tot_cmpl;

        len += scnprintf(buf + len, PAGE_SIZE - len,
                        "CPUcheck %s ",
                        (phba->cpucheck_on & LPFC_CHECK_NVME_IO ?
                                "Enabled" : "Disabled"));
        if (phba->nvmet_support) {
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "%s\n",
                                (phba->cpucheck_on & LPFC_CHECK_NVMET_RCV ?
                                        "Rcv Enabled\n" : "Rcv Disabled\n"));
        } else {
                len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
        }
        max_cnt = size - LPFC_DEBUG_OUT_LINE_SZ;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                qp = &phba->sli4_hba.hdwq[i];

                tot_rcv = 0;
                tot_xmt = 0;
                tot_cmpl = 0;
                for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                        tot_xmt += qp->cpucheck_xmt_io[j];
                        tot_cmpl += qp->cpucheck_cmpl_io[j];
                        if (phba->nvmet_support)
                                tot_rcv += qp->cpucheck_rcv_io[j];
                }

                /* Only display Hardware Qs with something */
                if (!tot_xmt && !tot_cmpl && !tot_rcv)
                        continue;

                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "HDWQ %03d: ", i);
                for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                        /* Only display non-zero counters */
                        if (!qp->cpucheck_xmt_io[j] &&
                            !qp->cpucheck_cmpl_io[j] &&
                            !qp->cpucheck_rcv_io[j])
                                continue;
                        if (phba->nvmet_support) {
                                len += scnprintf(buf + len, PAGE_SIZE - len,
                                                "CPU %03d: %x/%x/%x ", j,
                                                qp->cpucheck_rcv_io[j],
                                                qp->cpucheck_xmt_io[j],
                                                qp->cpucheck_cmpl_io[j]);
                        } else {
                                len += scnprintf(buf + len, PAGE_SIZE - len,
                                                "CPU %03d: %x/%x ", j,
                                                qp->cpucheck_xmt_io[j],
                                                qp->cpucheck_cmpl_io[j]);
                        }
                }
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "Total: %x\n", tot_xmt);
                if (len >= max_cnt) {
                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "Truncated ...\n");
                        return len;
                }
        }
        return len;
}

#endif

/**
 * lpfc_debugfs_disc_trc - Store discovery trace log
 * @vport: The vport to associate this trace string with for retrieval.
 * @mask: Log entry classification.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * discovery trace buffer associated with @vport. Only entries with a @mask that
 * match the current debugfs discovery mask will be saved. Entries that do not
 * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like
 * printf when displaying the log.
 **/
inline void
lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt,
        uint32_t data1, uint32_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_trc *dtp;
        int index;

        if (!(lpfc_debugfs_mask_disc_trc & mask))
                return;

        if (!lpfc_debugfs_enable || !lpfc_debugfs_max_disc_trc ||
                !vport || !vport->disc_trc)
                return;

        index = atomic_inc_return(&vport->disc_trc_cnt) &
                (lpfc_debugfs_max_disc_trc - 1);
        dtp = vport->disc_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
        dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt);
        dtp->jif = jiffies;
#endif
        return;
}

/**
 * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
 * @phba: The phba to associate this trace string with for retrieval.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and
 * @data3 are used like printf when displaying the log.
 **/
inline void
lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt,
        uint32_t data1, uint32_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_trc *dtp;
        int index;

        if (!lpfc_debugfs_enable || !lpfc_debugfs_max_slow_ring_trc ||
                !phba || !phba->slow_ring_trc)
                return;

        index = atomic_inc_return(&phba->slow_ring_trc_cnt) &
                (lpfc_debugfs_max_slow_ring_trc - 1);
        dtp = phba->slow_ring_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
        dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt);
        dtp->jif = jiffies;
#endif
        return;
}

/**
 * lpfc_debugfs_nvme_trc - Store NVME/NVMET trace log
 * @phba: The phba to associate this trace string with for retrieval.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * nvme trace buffer associated with @phba. @fmt, @data1, @data2, and
 * @data3 are used like printf when displaying the log.
 **/
inline void
lpfc_debugfs_nvme_trc(struct lpfc_hba *phba, char *fmt,
                      uint16_t data1, uint16_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_nvmeio_trc *dtp;
        int index;

        if (!phba->nvmeio_trc_on || !phba->nvmeio_trc)
                return;

        index = atomic_inc_return(&phba->nvmeio_trc_cnt) &
                (phba->nvmeio_trc_size - 1);
        dtp = phba->nvmeio_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
#endif
}

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
 * lpfc_debugfs_disc_trc_open - Open the discovery trace log
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int size;
        int rc = -ENOMEM;

        if (!lpfc_debugfs_max_disc_trc) {
                rc = -ENOSPC;
                goto out;
        }

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        size =  (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE);
        size = PAGE_ALIGN(size);

        debug->buffer = kmalloc(size, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_disc_trc_data(vport, debug->buffer, size);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int size;
        int rc = -ENOMEM;

        if (!lpfc_debugfs_max_slow_ring_trc) {
                rc = -ENOSPC;
                goto out;
        }

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        size =  (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE);
        size = PAGE_ALIGN(size);

        debug->buffer = kmalloc(size, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_slow_ring_trc_data(phba, debug->buffer, size);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_hbqinfo_data(phba, debug->buffer,
                LPFC_HBQINFO_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_multixripools_open - Open the multixripool debugfs buffer
 * @inode: The inode pointer that contains a hba pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the hba from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this hba, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_multixripools_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kzalloc(LPFC_DUMP_MULTIXRIPOOL_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_multixripools_data(
                phba, debug->buffer, LPFC_DUMP_MULTIXRIPOOL_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

#ifdef LPFC_HDWQ_LOCK_STAT
/**
 * lpfc_debugfs_lockstat_open - Open the lockstat debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.

 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_lockstat_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_HDWQINFO_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_lockstat_data(phba, debug->buffer,
                LPFC_HBQINFO_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        struct lpfc_sli4_hdw_queue *qp;
        char mybuf[64];
        char *pbuf;
        int i;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "reset", strlen("reset")) == 0) ||
            (strncmp(pbuf, "zero", strlen("zero")) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        qp = &phba->sli4_hba.hdwq[i];
                        qp->lock_conflict.alloc_xri_get = 0;
                        qp->lock_conflict.alloc_xri_put = 0;
                        qp->lock_conflict.free_xri = 0;
                        qp->lock_conflict.wq_access = 0;
                        qp->lock_conflict.alloc_pvt_pool = 0;
                        qp->lock_conflict.mv_from_pvt_pool = 0;
                        qp->lock_conflict.mv_to_pub_pool = 0;
                        qp->lock_conflict.mv_to_pvt_pool = 0;
                        qp->lock_conflict.free_pvt_pool = 0;
                        qp->lock_conflict.free_pub_pool = 0;
                        qp->lock_conflict.wq_access = 0;
                }
        }
        return nbytes;
}
#endif

/**
 * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_dumpHBASlim_data(phba, debug->buffer,
                LPFC_DUMPHBASLIM_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_dumpHostSlim_data(phba, debug->buffer,
                LPFC_DUMPHOSTSLIM_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
        size_t nbytes, loff_t *ppos)
{
        struct dentry *dent = file->f_path.dentry;
        struct lpfc_hba *phba = file->private_data;
        char cbuf[32];
        uint64_t tmp = 0;
        int cnt = 0;

        if (dent == phba->debug_writeGuard)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt);
        else if (dent == phba->debug_writeApp)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt);
        else if (dent == phba->debug_writeRef)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt);
        else if (dent == phba->debug_readGuard)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt);
        else if (dent == phba->debug_readApp)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt);
        else if (dent == phba->debug_readRef)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt);
        else if (dent == phba->debug_InjErrNPortID)
                cnt = scnprintf(cbuf, 32, "0x%06x\n",
                                phba->lpfc_injerr_nportid);
        else if (dent == phba->debug_InjErrWWPN) {
                memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name));
                tmp = cpu_to_be64(tmp);
                cnt = scnprintf(cbuf, 32, "0x%016llx\n", tmp);
        } else if (dent == phba->debug_InjErrLBA) {
                if (phba->lpfc_injerr_lba == (sector_t)(-1))
                        cnt = scnprintf(cbuf, 32, "off\n");
                else
                        cnt = scnprintf(cbuf, 32, "0x%llx\n",
                                 (uint64_t) phba->lpfc_injerr_lba);
        } else
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "0547 Unknown debugfs error injection entry\n");

        return simple_read_from_buffer(buf, nbytes, ppos, &cbuf, cnt);
}

static ssize_t
lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
        size_t nbytes, loff_t *ppos)
{
        struct dentry *dent = file->f_path.dentry;
        struct lpfc_hba *phba = file->private_data;
        char dstbuf[33];
        uint64_t tmp = 0;
        int size;

        memset(dstbuf, 0, 33);
        size = (nbytes < 32) ? nbytes : 32;
        if (copy_from_user(dstbuf, buf, size))
                return 0;

        if (dent == phba->debug_InjErrLBA) {
                if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
                        tmp = (uint64_t)(-1);
        }

        if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
                return 0;

        if (dent == phba->debug_writeGuard)
                phba->lpfc_injerr_wgrd_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_writeApp)
                phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_writeRef)
                phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readGuard)
                phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readApp)
                phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readRef)
                phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_InjErrLBA)
                phba->lpfc_injerr_lba = (sector_t)tmp;
        else if (dent == phba->debug_InjErrNPortID)
                phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID);
        else if (dent == phba->debug_InjErrWWPN) {
                tmp = cpu_to_be64(tmp);
                memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name));
        } else
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "0548 Unknown debugfs error injection entry\n");

        return nbytes;
}

static int
lpfc_debugfs_dif_err_release(struct inode *inode, struct file *file)
{
        return 0;
}

/**
 * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nodelist_data(vport, debug->buffer,
                LPFC_NODELIST_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_lseek - Seek through a debugfs file
 * @file: The file pointer to seek through.
 * @off: The offset to seek to or the amount to seek by.
 * @whence: Indicates how to seek.
 *
 * Description:
 * This routine is the entry point for the debugfs lseek file operation. The
 * @whence parameter indicates whether @off is the offset to directly seek to,
 * or if it is a value to seek forward or reverse by. This function figures out
 * what the new offset of the debugfs file will be and assigns that value to the
 * f_pos field of @file.
 *
 * Returns:
 * This function returns the new offset if successful and returns a negative
 * error if unable to process the seek.
 **/
static loff_t
lpfc_debugfs_lseek(struct file *file, loff_t off, int whence)
{
        struct lpfc_debug *debug = file->private_data;
        return fixed_size_llseek(file, off, whence, debug->len);
}

/**
 * lpfc_debugfs_read - Read a debugfs file
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from from the buffer indicated in the private_data
 * field of @file. It will start reading at @ppos and copy up to @nbytes of
 * data to @buf.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_debugfs_read(struct file *file, char __user *buf,
                  size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;

        return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer,
                                       debug->len);
}

/**
 * lpfc_debugfs_release - Release the buffer used to store debugfs file data
 * @inode: The inode pointer that contains a vport pointer. (unused)
 * @file: The file pointer that contains the buffer to release.
 *
 * Description:
 * This routine frees the buffer that was allocated when the debugfs file was
 * opened.
 *
 * Returns:
 * This function returns zero.
 **/
static int
lpfc_debugfs_release(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug = file->private_data;

        kfree(debug->buffer);
        kfree(debug);

        return 0;
}

/**
 * lpfc_debugfs_multixripools_write - Clear multi-XRI pools statistics
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine clears multi-XRI pools statistics when buf contains "clear".
 *
 * Return Value:
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_debugfs_multixripools_write(struct file *file, const char __user *buf,
                                 size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        char mybuf[64];
        char *pbuf;
        u32 i;
        u32 hwq_count;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;

        if (nbytes > 64)
                nbytes = 64;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "clear", strlen("clear"))) == 0) {
                hwq_count = phba->cfg_hdw_queue;
                for (i = 0; i < hwq_count; i++) {
                        qp = &phba->sli4_hba.hdwq[i];
                        multixri_pool = qp->p_multixri_pool;
                        if (!multixri_pool)
                                continue;

                        qp->empty_io_bufs = 0;
                        multixri_pool->pbl_empty_count = 0;
#ifdef LPFC_MXP_STAT
                        multixri_pool->above_limit_count = 0;
                        multixri_pool->below_limit_count = 0;
                        multixri_pool->stat_max_hwm = 0;
                        multixri_pool->local_pbl_hit_count = 0;
                        multixri_pool->other_pbl_hit_count = 0;

                        multixri_pool->stat_pbl_count = 0;
                        multixri_pool->stat_pvt_count = 0;
                        multixri_pool->stat_busy_count = 0;
                        multixri_pool->stat_snapshot_taken = 0;
#endif
                }
                return strlen(pbuf);
        }

        return -EINVAL;
}

static int
lpfc_debugfs_nvmestat_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMESTAT_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmestat_data(vport, debug->buffer,
                LPFC_NVMESTAT_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmestat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_nvmet_tgtport *tgtp;
        char mybuf[64];
        char *pbuf;

        if (!phba->targetport)
                return -ENXIO;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
        if ((strncmp(pbuf, "reset", strlen("reset")) == 0) ||
            (strncmp(pbuf, "zero", strlen("zero")) == 0)) {
                atomic_set(&tgtp->rcv_ls_req_in, 0);
                atomic_set(&tgtp->rcv_ls_req_out, 0);
                atomic_set(&tgtp->rcv_ls_req_drop, 0);
                atomic_set(&tgtp->xmt_ls_abort, 0);
                atomic_set(&tgtp->xmt_ls_abort_cmpl, 0);
                atomic_set(&tgtp->xmt_ls_rsp, 0);
                atomic_set(&tgtp->xmt_ls_drop, 0);
                atomic_set(&tgtp->xmt_ls_rsp_error, 0);
                atomic_set(&tgtp->xmt_ls_rsp_cmpl, 0);

                atomic_set(&tgtp->rcv_fcp_cmd_in, 0);
                atomic_set(&tgtp->rcv_fcp_cmd_out, 0);
                atomic_set(&tgtp->rcv_fcp_cmd_drop, 0);
                atomic_set(&tgtp->xmt_fcp_drop, 0);
                atomic_set(&tgtp->xmt_fcp_read_rsp, 0);
                atomic_set(&tgtp->xmt_fcp_read, 0);
                atomic_set(&tgtp->xmt_fcp_write, 0);
                atomic_set(&tgtp->xmt_fcp_rsp, 0);
                atomic_set(&tgtp->xmt_fcp_release, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_cmpl, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_error, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_drop, 0);

                atomic_set(&tgtp->xmt_fcp_abort, 0);
                atomic_set(&tgtp->xmt_fcp_abort_cmpl, 0);
                atomic_set(&tgtp->xmt_abort_sol, 0);
                atomic_set(&tgtp->xmt_abort_unsol, 0);
                atomic_set(&tgtp->xmt_abort_rsp, 0);
                atomic_set(&tgtp->xmt_abort_rsp_error, 0);
        }
        return nbytes;
}

static int
lpfc_debugfs_scsistat_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kzalloc(LPFC_SCSISTAT_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_scsistat_data(vport, debug->buffer,
                LPFC_SCSISTAT_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_scsistat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba *phba = vport->phba;
        char mybuf[6] = {0};
        int i;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        if (copy_from_user(mybuf, buf, (nbytes >= sizeof(mybuf)) ?
                                       (sizeof(mybuf) - 1) : nbytes))
                return -EFAULT;

        if ((strncmp(&mybuf[0], "reset", strlen("reset")) == 0) ||
            (strncmp(&mybuf[0], "zero", strlen("zero")) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        memset(&phba->sli4_hba.hdwq[i].scsi_cstat, 0,
                               sizeof(phba->sli4_hba.hdwq[i].scsi_cstat));
                }
        }

        return nbytes;
}

static int
lpfc_debugfs_nvmektime_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMEKTIME_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmektime_data(vport, debug->buffer,
                LPFC_NVMEKTIME_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmektime_write(struct file *file, const char __user *buf,
                             size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        char mybuf[64];
        char *pbuf;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                phba->ktime_data_samples = 0;
                phba->ktime_status_samples = 0;
                phba->ktime_seg1_total = 0;
                phba->ktime_seg1_max = 0;
                phba->ktime_seg1_min = 0xffffffff;
                phba->ktime_seg2_total = 0;
                phba->ktime_seg2_max = 0;
                phba->ktime_seg2_min = 0xffffffff;
                phba->ktime_seg3_total = 0;
                phba->ktime_seg3_max = 0;
                phba->ktime_seg3_min = 0xffffffff;
                phba->ktime_seg4_total = 0;
                phba->ktime_seg4_max = 0;
                phba->ktime_seg4_min = 0xffffffff;
                phba->ktime_seg5_total = 0;
                phba->ktime_seg5_max = 0;
                phba->ktime_seg5_min = 0xffffffff;
                phba->ktime_seg6_total = 0;
                phba->ktime_seg6_max = 0;
                phba->ktime_seg6_min = 0xffffffff;
                phba->ktime_seg7_total = 0;
                phba->ktime_seg7_max = 0;
                phba->ktime_seg7_min = 0xffffffff;
                phba->ktime_seg8_total = 0;
                phba->ktime_seg8_max = 0;
                phba->ktime_seg8_min = 0xffffffff;
                phba->ktime_seg9_total = 0;
                phba->ktime_seg9_max = 0;
                phba->ktime_seg9_min = 0xffffffff;
                phba->ktime_seg10_total = 0;
                phba->ktime_seg10_max = 0;
                phba->ktime_seg10_min = 0xffffffff;

                phba->ktime_on = 1;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "off",
                   sizeof("off") - 1) == 0)) {
                phba->ktime_on = 0;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "zero",
                   sizeof("zero") - 1) == 0)) {
                phba->ktime_data_samples = 0;
                phba->ktime_status_samples = 0;
                phba->ktime_seg1_total = 0;
                phba->ktime_seg1_max = 0;
                phba->ktime_seg1_min = 0xffffffff;
                phba->ktime_seg2_total = 0;
                phba->ktime_seg2_max = 0;
                phba->ktime_seg2_min = 0xffffffff;
                phba->ktime_seg3_total = 0;
                phba->ktime_seg3_max = 0;
                phba->ktime_seg3_min = 0xffffffff;
                phba->ktime_seg4_total = 0;
                phba->ktime_seg4_max = 0;
                phba->ktime_seg4_min = 0xffffffff;
                phba->ktime_seg5_total = 0;
                phba->ktime_seg5_max = 0;
                phba->ktime_seg5_min = 0xffffffff;
                phba->ktime_seg6_total = 0;
                phba->ktime_seg6_max = 0;
                phba->ktime_seg6_min = 0xffffffff;
                phba->ktime_seg7_total = 0;
                phba->ktime_seg7_max = 0;
                phba->ktime_seg7_min = 0xffffffff;
                phba->ktime_seg8_total = 0;
                phba->ktime_seg8_max = 0;
                phba->ktime_seg8_min = 0xffffffff;
                phba->ktime_seg9_total = 0;
                phba->ktime_seg9_max = 0;
                phba->ktime_seg9_min = 0xffffffff;
                phba->ktime_seg10_total = 0;
                phba->ktime_seg10_max = 0;
                phba->ktime_seg10_min = 0xffffffff;
                return strlen(pbuf);
        }
        return -EINVAL;
}

static int
lpfc_debugfs_nvmeio_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMEIO_TRC_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmeio_trc_data(phba, debug->buffer,
                LPFC_NVMEIO_TRC_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmeio_trc_write(struct file *file, const char __user *buf,
                              size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        int i;
        unsigned long sz;
        char mybuf[64];
        char *pbuf;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "off", sizeof("off") - 1) == 0)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0570 nvmeio_trc_off\n");
                phba->nvmeio_trc_output_idx = 0;
                phba->nvmeio_trc_on = 0;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0571 nvmeio_trc_on\n");
                phba->nvmeio_trc_output_idx = 0;
                phba->nvmeio_trc_on = 1;
                return strlen(pbuf);
        }

        /* We must be off to allocate the trace buffer */
        if (phba->nvmeio_trc_on != 0)
                return -EINVAL;

        /* If not on or off, the parameter is the trace buffer size */
        i = kstrtoul(pbuf, 0, &sz);
        if (i)
                return -EINVAL;
        phba->nvmeio_trc_size = (uint32_t)sz;

        /* It must be a power of 2 - round down */
        i = 0;
        while (sz > 1) {
                sz = sz >> 1;
                i++;
        }
        sz = (1 << i);
        if (phba->nvmeio_trc_size != sz)
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0572 nvmeio_trc_size changed to %ld\n",
                                sz);
        phba->nvmeio_trc_size = (uint32_t)sz;

        /* If one previously exists, free it */
        kfree(phba->nvmeio_trc);

        /* Allocate new trace buffer and initialize */
        phba->nvmeio_trc = kzalloc((sizeof(struct lpfc_debugfs_nvmeio_trc) *
                                    sz), GFP_KERNEL);
        if (!phba->nvmeio_trc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0573 Cannot create debugfs "
                                "nvmeio_trc buffer\n");
                return -ENOMEM;
        }
        atomic_set(&phba->nvmeio_trc_cnt, 0);
        phba->nvmeio_trc_on = 0;
        phba->nvmeio_trc_output_idx = 0;

        return strlen(pbuf);
}

static int
lpfc_debugfs_cpucheck_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_CPUCHECK_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_cpucheck_data(vport, debug->buffer,
                LPFC_CPUCHECK_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_cpucheck_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_sli4_hdw_queue *qp;
        char mybuf[64];
        char *pbuf;
        int i, j;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
                else
                        phba->cpucheck_on |= (LPFC_CHECK_NVME_IO |
                                LPFC_CHECK_SCSI_IO);
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "nvme_on", sizeof("nvme_on") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
                else
                        phba->cpucheck_on |= LPFC_CHECK_NVME_IO;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "scsi_on", sizeof("scsi_on") - 1) == 0)) {
                phba->cpucheck_on |= LPFC_CHECK_SCSI_IO;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "rcv",
                   sizeof("rcv") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_RCV;
                else
                        return -EINVAL;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "off",
                   sizeof("off") - 1) == 0)) {
                phba->cpucheck_on = LPFC_CHECK_OFF;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "zero",
                   sizeof("zero") - 1) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        qp = &phba->sli4_hba.hdwq[i];

                        for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                                qp->cpucheck_rcv_io[j] = 0;
                                qp->cpucheck_xmt_io[j] = 0;
                                qp->cpucheck_cmpl_io[j] = 0;
                        }
                }
                return strlen(pbuf);
        }
        return -EINVAL;
}

/*
 * ---------------------------------
 * iDiag debugfs file access methods
 * ---------------------------------
 *
 * All access methods are through the proper SLI4 PCI function's debugfs
 * iDiag directory:
 *
 *     /sys/kernel/debug/lpfc/fn<#>/iDiag
 */

/**
 * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space
 * @buf: The pointer to the user space buffer.
 * @nbytes: The number of bytes in the user space buffer.
 * @idiag_cmd: pointer to the idiag command struct.
 *
 * This routine reads data from debugfs user space buffer and parses the
 * buffer for getting the idiag command and arguments. The while space in
 * between the set of data is used as the parsing separator.
 *
 * This routine returns 0 when successful, it returns proper error code
 * back to the user space in error conditions.
 */
static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
                              struct lpfc_idiag_cmd *idiag_cmd)
{
        char mybuf[64];
        char *pbuf, *step_str;
        int i;
        size_t bsize;

        memset(mybuf, 0, sizeof(mybuf));
        memset(idiag_cmd, 0, sizeof(*idiag_cmd));
        bsize = min(nbytes, (sizeof(mybuf)-1));

        if (copy_from_user(mybuf, buf, bsize))
                return -EFAULT;
        pbuf = &mybuf[0];
        step_str = strsep(&pbuf, "\t ");

        /* The opcode must present */
        if (!step_str)
                return -EINVAL;

        idiag_cmd->opcode = simple_strtol(step_str, NULL, 0);
        if (idiag_cmd->opcode == 0)
                return -EINVAL;

        for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
                step_str = strsep(&pbuf, "\t ");
                if (!step_str)
                        return i;
                idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
        }
        return i;
}

/**
 * lpfc_idiag_open - idiag open debugfs
 * @inode: The inode pointer that contains a pointer to phba.
 * @file: The file pointer to attach the file operation.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It
 * gets the reference to phba from the i_private field in @inode, it then
 * allocates buffer for the file operation, performs the necessary PCI config
 * space read into the allocated buffer according to the idiag user command
 * setup, and then returns a pointer to buffer in the private_data field in
 * @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return an
 * negative error value.
 **/
static int
lpfc_idiag_open(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                return -ENOMEM;