linux/drivers/usb/renesas_usbhs/common.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-1.0+
   2/*
   3 * Renesas USB driver
   4 *
   5 * Copyright (C) 2011 Renesas Solutions Corp.
   6 * Copyright (C) 2019 Renesas Electronics Corporation
   7 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
   8 */
   9#include <linux/clk.h>
  10#include <linux/err.h>
  11#include <linux/gpio.h>
  12#include <linux/io.h>
  13#include <linux/module.h>
  14#include <linux/of_device.h>
  15#include <linux/of_gpio.h>
  16#include <linux/pm_runtime.h>
  17#include <linux/reset.h>
  18#include <linux/slab.h>
  19#include <linux/sysfs.h>
  20#include "common.h"
  21#include "rcar2.h"
  22#include "rcar3.h"
  23#include "rza.h"
  24
  25/*
  26 *              image of renesas_usbhs
  27 *
  28 * ex) gadget case
  29
  30 * mod.c
  31 * mod_gadget.c
  32 * mod_host.c           pipe.c          fifo.c
  33 *
  34 *                      +-------+       +-----------+
  35 *                      | pipe0 |------>| fifo pio  |
  36 * +------------+       +-------+       +-----------+
  37 * | mod_gadget |=====> | pipe1 |--+
  38 * +------------+       +-------+  |    +-----------+
  39 *                      | pipe2 |  |  +-| fifo dma0 |
  40 * +------------+       +-------+  |  | +-----------+
  41 * | mod_host   |       | pipe3 |<-|--+
  42 * +------------+       +-------+  |    +-----------+
  43 *                      | ....  |  +--->| fifo dma1 |
  44 *                      | ....  |       +-----------+
  45 */
  46
  47/*
  48 * platform call back
  49 *
  50 * renesas usb support platform callback function.
  51 * Below macro call it.
  52 * if platform doesn't have callback, it return 0 (no error)
  53 */
  54#define usbhs_platform_call(priv, func, args...)\
  55        (!(priv) ? -ENODEV :                    \
  56         !((priv)->pfunc->func) ? 0 :           \
  57         (priv)->pfunc->func(args))
  58
  59/*
  60 *              common functions
  61 */
  62u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
  63{
  64        return ioread16(priv->base + reg);
  65}
  66
  67void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
  68{
  69        iowrite16(data, priv->base + reg);
  70}
  71
  72void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
  73{
  74        u16 val = usbhs_read(priv, reg);
  75
  76        val &= ~mask;
  77        val |= data & mask;
  78
  79        usbhs_write(priv, reg, val);
  80}
  81
  82struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
  83{
  84        return dev_get_drvdata(&pdev->dev);
  85}
  86
  87int usbhs_get_id_as_gadget(struct platform_device *pdev)
  88{
  89        return USBHS_GADGET;
  90}
  91
  92/*
  93 *              syscfg functions
  94 */
  95static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
  96{
  97        usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
  98}
  99
 100void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
 101{
 102        u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 103        u16 val  = DCFM | DRPD | HSE | USBE;
 104
 105        /*
 106         * if enable
 107         *
 108         * - select Host mode
 109         * - D+ Line/D- Line Pull-down
 110         */
 111        usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 112}
 113
 114void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
 115{
 116        u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 117        u16 val  = HSE | USBE;
 118
 119        /* CNEN bit is required for function operation */
 120        if (usbhs_get_dparam(priv, has_cnen)) {
 121                mask |= CNEN;
 122                val  |= CNEN;
 123        }
 124
 125        /*
 126         * if enable
 127         *
 128         * - select Function mode
 129         * - D+ Line Pull-up is disabled
 130         *      When D+ Line Pull-up is enabled,
 131         *      calling usbhs_sys_function_pullup(,1)
 132         */
 133        usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 134}
 135
 136void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
 137{
 138        usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
 139}
 140
 141void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
 142{
 143        usbhs_write(priv, TESTMODE, mode);
 144}
 145
 146/*
 147 *              frame functions
 148 */
 149int usbhs_frame_get_num(struct usbhs_priv *priv)
 150{
 151        return usbhs_read(priv, FRMNUM) & FRNM_MASK;
 152}
 153
 154/*
 155 *              usb request functions
 156 */
 157void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 158{
 159        u16 val;
 160
 161        val = usbhs_read(priv, USBREQ);
 162        req->bRequest           = (val >> 8) & 0xFF;
 163        req->bRequestType       = (val >> 0) & 0xFF;
 164
 165        req->wValue     = cpu_to_le16(usbhs_read(priv, USBVAL));
 166        req->wIndex     = cpu_to_le16(usbhs_read(priv, USBINDX));
 167        req->wLength    = cpu_to_le16(usbhs_read(priv, USBLENG));
 168}
 169
 170void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 171{
 172        usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
 173        usbhs_write(priv, USBVAL,  le16_to_cpu(req->wValue));
 174        usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex));
 175        usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength));
 176
 177        usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
 178}
 179
 180/*
 181 *              bus/vbus functions
 182 */
 183void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
 184{
 185        u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
 186
 187        if (status != USBRST) {
 188                struct device *dev = usbhs_priv_to_dev(priv);
 189                dev_err(dev, "usbhs should be reset\n");
 190        }
 191
 192        usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
 193}
 194
 195void usbhs_bus_send_reset(struct usbhs_priv *priv)
 196{
 197        usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
 198}
 199
 200int usbhs_bus_get_speed(struct usbhs_priv *priv)
 201{
 202        u16 dvstctr = usbhs_read(priv, DVSTCTR);
 203
 204        switch (RHST & dvstctr) {
 205        case RHST_LOW_SPEED:
 206                return USB_SPEED_LOW;
 207        case RHST_FULL_SPEED:
 208                return USB_SPEED_FULL;
 209        case RHST_HIGH_SPEED:
 210                return USB_SPEED_HIGH;
 211        }
 212
 213        return USB_SPEED_UNKNOWN;
 214}
 215
 216int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
 217{
 218        struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 219
 220        return usbhs_platform_call(priv, set_vbus, pdev, enable);
 221}
 222
 223static void usbhsc_bus_init(struct usbhs_priv *priv)
 224{
 225        usbhs_write(priv, DVSTCTR, 0);
 226
 227        usbhs_vbus_ctrl(priv, 0);
 228}
 229
 230/*
 231 *              device configuration
 232 */
 233int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
 234                           u16 upphub, u16 hubport, u16 speed)
 235{
 236        struct device *dev = usbhs_priv_to_dev(priv);
 237        u16 usbspd = 0;
 238        u32 reg = DEVADD0 + (2 * devnum);
 239
 240        if (devnum > 10) {
 241                dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
 242                return -EIO;
 243        }
 244
 245        if (upphub > 0xA) {
 246                dev_err(dev, "unsupported hub number %d\n", upphub);
 247                return -EIO;
 248        }
 249
 250        switch (speed) {
 251        case USB_SPEED_LOW:
 252                usbspd = USBSPD_SPEED_LOW;
 253                break;
 254        case USB_SPEED_FULL:
 255                usbspd = USBSPD_SPEED_FULL;
 256                break;
 257        case USB_SPEED_HIGH:
 258                usbspd = USBSPD_SPEED_HIGH;
 259                break;
 260        default:
 261                dev_err(dev, "unsupported speed %d\n", speed);
 262                return -EIO;
 263        }
 264
 265        usbhs_write(priv, reg,  UPPHUB(upphub)  |
 266                                HUBPORT(hubport)|
 267                                USBSPD(usbspd));
 268
 269        return 0;
 270}
 271
 272/*
 273 *              interrupt functions
 274 */
 275void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
 276{
 277        u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
 278
 279        usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
 280}
 281
 282/*
 283 *              local functions
 284 */
 285static void usbhsc_set_buswait(struct usbhs_priv *priv)
 286{
 287        int wait = usbhs_get_dparam(priv, buswait_bwait);
 288
 289        /* set bus wait if platform have */
 290        if (wait)
 291                usbhs_bset(priv, BUSWAIT, 0x000F, wait);
 292}
 293
 294static bool usbhsc_is_multi_clks(struct usbhs_priv *priv)
 295{
 296        return priv->dparam.multi_clks;
 297}
 298
 299static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
 300{
 301        if (!usbhsc_is_multi_clks(priv))
 302                return 0;
 303
 304        /* The first clock should exist */
 305        priv->clks[0] = of_clk_get(dev_of_node(dev), 0);
 306        if (IS_ERR(priv->clks[0]))
 307                return PTR_ERR(priv->clks[0]);
 308
 309        /*
 310         * To backward compatibility with old DT, this driver checks the return
 311         * value if it's -ENOENT or not.
 312         */
 313        priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
 314        if (PTR_ERR(priv->clks[1]) == -ENOENT)
 315                priv->clks[1] = NULL;
 316        else if (IS_ERR(priv->clks[1]))
 317                return PTR_ERR(priv->clks[1]);
 318
 319        return 0;
 320}
 321
 322static void usbhsc_clk_put(struct usbhs_priv *priv)
 323{
 324        int i;
 325
 326        if (!usbhsc_is_multi_clks(priv))
 327                return;
 328
 329        for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
 330                clk_put(priv->clks[i]);
 331}
 332
 333static int usbhsc_clk_prepare_enable(struct usbhs_priv *priv)
 334{
 335        int i, ret;
 336
 337        if (!usbhsc_is_multi_clks(priv))
 338                return 0;
 339
 340        for (i = 0; i < ARRAY_SIZE(priv->clks); i++) {
 341                ret = clk_prepare_enable(priv->clks[i]);
 342                if (ret) {
 343                        while (--i >= 0)
 344                                clk_disable_unprepare(priv->clks[i]);
 345                        return ret;
 346                }
 347        }
 348
 349        return ret;
 350}
 351
 352static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
 353{
 354        int i;
 355
 356        if (!usbhsc_is_multi_clks(priv))
 357                return;
 358
 359        for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
 360                clk_disable_unprepare(priv->clks[i]);
 361}
 362
 363/*
 364 *              platform default param
 365 */
 366
 367/* commonly used on old SH-Mobile SoCs */
 368static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
 369        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
 370        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
 371        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
 372        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
 373        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
 374        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
 375        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
 376        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
 377        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
 378        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
 379};
 380
 381/* commonly used on newer SH-Mobile and R-Car SoCs */
 382static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
 383        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
 384        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
 385        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
 386        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
 387        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
 388        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
 389        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
 390        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
 391        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
 392        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
 393        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
 394        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
 395        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
 396        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
 397        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
 398        RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
 399};
 400
 401/*
 402 *              power control
 403 */
 404static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
 405{
 406        struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 407        struct device *dev = usbhs_priv_to_dev(priv);
 408
 409        if (enable) {
 410                /* enable PM */
 411                pm_runtime_get_sync(dev);
 412
 413                /* enable clks */
 414                if (usbhsc_clk_prepare_enable(priv))
 415                        return;
 416
 417                /* enable platform power */
 418                usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 419
 420                /* USB on */
 421                usbhs_sys_clock_ctrl(priv, enable);
 422        } else {
 423                /* USB off */
 424                usbhs_sys_clock_ctrl(priv, enable);
 425
 426                /* disable platform power */
 427                usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 428
 429                /* disable clks */
 430                usbhsc_clk_disable_unprepare(priv);
 431
 432                /* disable PM */
 433                pm_runtime_put_sync(dev);
 434        }
 435}
 436
 437/*
 438 *              hotplug
 439 */
 440static void usbhsc_hotplug(struct usbhs_priv *priv)
 441{
 442        struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 443        struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 444        int id;
 445        int enable;
 446        int cable;
 447        int ret;
 448
 449        /*
 450         * get vbus status from platform
 451         */
 452        enable = usbhs_mod_info_call(priv, get_vbus, pdev);
 453
 454        /*
 455         * get id from platform
 456         */
 457        id = usbhs_platform_call(priv, get_id, pdev);
 458
 459        if (enable && !mod) {
 460                if (priv->edev) {
 461                        cable = extcon_get_state(priv->edev, EXTCON_USB_HOST);
 462                        if ((cable > 0 && id != USBHS_HOST) ||
 463                            (!cable && id != USBHS_GADGET)) {
 464                                dev_info(&pdev->dev,
 465                                         "USB cable plugged in doesn't match the selected role!\n");
 466                                return;
 467                        }
 468                }
 469
 470                ret = usbhs_mod_change(priv, id);
 471                if (ret < 0)
 472                        return;
 473
 474                dev_dbg(&pdev->dev, "%s enable\n", __func__);
 475
 476                /* power on */
 477                if (usbhs_get_dparam(priv, runtime_pwctrl))
 478                        usbhsc_power_ctrl(priv, enable);
 479
 480                /* bus init */
 481                usbhsc_set_buswait(priv);
 482                usbhsc_bus_init(priv);
 483
 484                /* module start */
 485                usbhs_mod_call(priv, start, priv);
 486
 487        } else if (!enable && mod) {
 488                dev_dbg(&pdev->dev, "%s disable\n", __func__);
 489
 490                /* module stop */
 491                usbhs_mod_call(priv, stop, priv);
 492
 493                /* bus init */
 494                usbhsc_bus_init(priv);
 495
 496                /* power off */
 497                if (usbhs_get_dparam(priv, runtime_pwctrl))
 498                        usbhsc_power_ctrl(priv, enable);
 499
 500                usbhs_mod_change(priv, -1);
 501
 502                /* reset phy for next connection */
 503                usbhs_platform_call(priv, phy_reset, pdev);
 504        }
 505}
 506
 507/*
 508 *              notify hotplug
 509 */
 510static void usbhsc_notify_hotplug(struct work_struct *work)
 511{
 512        struct usbhs_priv *priv = container_of(work,
 513                                               struct usbhs_priv,
 514                                               notify_hotplug_work.work);
 515        usbhsc_hotplug(priv);
 516}
 517
 518int usbhsc_schedule_notify_hotplug(struct platform_device *pdev)
 519{
 520        struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 521        int delay = usbhs_get_dparam(priv, detection_delay);
 522
 523        /*
 524         * This functions will be called in interrupt.
 525         * To make sure safety context,
 526         * use workqueue for usbhs_notify_hotplug
 527         */
 528        schedule_delayed_work(&priv->notify_hotplug_work,
 529                              msecs_to_jiffies(delay));
 530        return 0;
 531}
 532
 533/*
 534 *              platform functions
 535 */
 536static const struct of_device_id usbhs_of_match[] = {
 537        {
 538                .compatible = "renesas,usbhs-r8a774c0",
 539                .data = &usbhs_rcar_gen3_with_pll_plat_info,
 540        },
 541        {
 542                .compatible = "renesas,usbhs-r8a7790",
 543                .data = &usbhs_rcar_gen2_plat_info,
 544        },
 545        {
 546                .compatible = "renesas,usbhs-r8a7791",
 547                .data = &usbhs_rcar_gen2_plat_info,
 548        },
 549        {
 550                .compatible = "renesas,usbhs-r8a7794",
 551                .data = &usbhs_rcar_gen2_plat_info,
 552        },
 553        {
 554                .compatible = "renesas,usbhs-r8a7795",
 555                .data = &usbhs_rcar_gen3_plat_info,
 556        },
 557        {
 558                .compatible = "renesas,usbhs-r8a7796",
 559                .data = &usbhs_rcar_gen3_plat_info,
 560        },
 561        {
 562                .compatible = "renesas,usbhs-r8a77990",
 563                .data = &usbhs_rcar_gen3_with_pll_plat_info,
 564        },
 565        {
 566                .compatible = "renesas,usbhs-r8a77995",
 567                .data = &usbhs_rcar_gen3_with_pll_plat_info,
 568        },
 569        {
 570                .compatible = "renesas,rcar-gen2-usbhs",
 571                .data = &usbhs_rcar_gen2_plat_info,
 572        },
 573        {
 574                .compatible = "renesas,rcar-gen3-usbhs",
 575                .data = &usbhs_rcar_gen3_plat_info,
 576        },
 577        {
 578                .compatible = "renesas,rza1-usbhs",
 579                .data = &usbhs_rza1_plat_info,
 580        },
 581        {
 582                .compatible = "renesas,rza2-usbhs",
 583                .data = &usbhs_rza2_plat_info,
 584        },
 585        { },
 586};
 587MODULE_DEVICE_TABLE(of, usbhs_of_match);
 588
 589static int usbhs_probe(struct platform_device *pdev)
 590{
 591        const struct renesas_usbhs_platform_info *info;
 592        struct usbhs_priv *priv;
 593        struct resource *res, *irq_res;
 594        struct device *dev = &pdev->dev;
 595        int ret, gpio;
 596        u32 tmp;
 597
 598        /* check device node */
 599        if (dev_of_node(dev))
 600                info = of_device_get_match_data(dev);
 601        else
 602                info = renesas_usbhs_get_info(pdev);
 603
 604        /* check platform information */
 605        if (!info) {
 606                dev_err(dev, "no platform information\n");
 607                return -EINVAL;
 608        }
 609
 610        /* platform data */
 611        irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 612        if (!irq_res) {
 613                dev_err(dev, "Not enough Renesas USB platform resources.\n");
 614                return -ENODEV;
 615        }
 616
 617        /* usb private data */
 618        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 619        if (!priv)
 620                return -ENOMEM;
 621
 622        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 623        priv->base = devm_ioremap_resource(&pdev->dev, res);
 624        if (IS_ERR(priv->base))
 625                return PTR_ERR(priv->base);
 626
 627        if (of_property_read_bool(dev_of_node(dev), "extcon")) {
 628                priv->edev = extcon_get_edev_by_phandle(dev, 0);
 629                if (IS_ERR(priv->edev))
 630                        return PTR_ERR(priv->edev);
 631        }
 632
 633        priv->rsts = devm_reset_control_array_get_optional_shared(dev);
 634        if (IS_ERR(priv->rsts))
 635                return PTR_ERR(priv->rsts);
 636
 637        /*
 638         * care platform info
 639         */
 640
 641        priv->dparam = info->driver_param;
 642
 643        if (!info->platform_callback.get_id) {
 644                dev_err(dev, "no platform callbacks\n");
 645                return -EINVAL;
 646        }
 647        priv->pfunc = &info->platform_callback;
 648
 649        /* set default param if platform doesn't have */
 650        if (usbhs_get_dparam(priv, has_new_pipe_configs)) {
 651                priv->dparam.pipe_configs = usbhsc_new_pipe;
 652                priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
 653        } else if (!priv->dparam.pipe_configs) {
 654                priv->dparam.pipe_configs = usbhsc_default_pipe;
 655                priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
 656        }
 657        if (!priv->dparam.pio_dma_border)
 658                priv->dparam.pio_dma_border = 64; /* 64byte */
 659        if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp))
 660                priv->dparam.buswait_bwait = tmp;
 661        gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio",
 662                                       0, NULL);
 663        if (gpio > 0)
 664                priv->dparam.enable_gpio = gpio;
 665
 666        /* FIXME */
 667        /* runtime power control ? */
 668        if (priv->pfunc->get_vbus)
 669                usbhs_get_dparam(priv, runtime_pwctrl) = 1;
 670
 671        /*
 672         * priv settings
 673         */
 674        priv->irq       = irq_res->start;
 675        if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
 676                priv->irqflags = IRQF_SHARED;
 677        priv->pdev      = pdev;
 678        INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
 679        spin_lock_init(usbhs_priv_to_lock(priv));
 680
 681        /* call pipe and module init */
 682        ret = usbhs_pipe_probe(priv);
 683        if (ret < 0)
 684                return ret;
 685
 686        ret = usbhs_fifo_probe(priv);
 687        if (ret < 0)
 688                goto probe_end_pipe_exit;
 689
 690        ret = usbhs_mod_probe(priv);
 691        if (ret < 0)
 692                goto probe_end_fifo_exit;
 693
 694        /* dev_set_drvdata should be called after usbhs_mod_init */
 695        platform_set_drvdata(pdev, priv);
 696
 697        ret = reset_control_deassert(priv->rsts);
 698        if (ret)
 699                goto probe_fail_rst;
 700
 701        ret = usbhsc_clk_get(dev, priv);
 702        if (ret)
 703                goto probe_fail_clks;
 704
 705        /*
 706         * deviece reset here because
 707         * USB device might be used in boot loader.
 708         */
 709        usbhs_sys_clock_ctrl(priv, 0);
 710
 711        /* check GPIO determining if USB function should be enabled */
 712        if (priv->dparam.enable_gpio) {
 713                gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
 714                ret = !gpio_get_value(priv->dparam.enable_gpio);
 715                gpio_free(priv->dparam.enable_gpio);
 716                if (ret) {
 717                        dev_warn(dev, "USB function not selected (GPIO %d)\n",
 718                                 priv->dparam.enable_gpio);
 719                        ret = -ENOTSUPP;
 720                        goto probe_end_mod_exit;
 721                }
 722        }
 723
 724        /*
 725         * platform call
 726         *
 727         * USB phy setup might depend on CPU/Board.
 728         * If platform has its callback functions,
 729         * call it here.
 730         */
 731        ret = usbhs_platform_call(priv, hardware_init, pdev);
 732        if (ret < 0) {
 733                dev_err(dev, "platform init failed.\n");
 734                goto probe_end_mod_exit;
 735        }
 736
 737        /* reset phy for connection */
 738        usbhs_platform_call(priv, phy_reset, pdev);
 739
 740        /* power control */
 741        pm_runtime_enable(dev);
 742        if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
 743                usbhsc_power_ctrl(priv, 1);
 744                usbhs_mod_autonomy_mode(priv);
 745        } else {
 746                usbhs_mod_non_autonomy_mode(priv);
 747        }
 748
 749        /*
 750         * manual call notify_hotplug for cold plug
 751         */
 752        usbhsc_schedule_notify_hotplug(pdev);
 753
 754        dev_info(dev, "probed\n");
 755
 756        return ret;
 757
 758probe_end_mod_exit:
 759        usbhsc_clk_put(priv);
 760probe_fail_clks:
 761        reset_control_assert(priv->rsts);
 762probe_fail_rst:
 763        usbhs_mod_remove(priv);
 764probe_end_fifo_exit:
 765        usbhs_fifo_remove(priv);
 766probe_end_pipe_exit:
 767        usbhs_pipe_remove(priv);
 768
 769        dev_info(dev, "probe failed (%d)\n", ret);
 770
 771        return ret;
 772}
 773
 774static int usbhs_remove(struct platform_device *pdev)
 775{
 776        struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 777
 778        dev_dbg(&pdev->dev, "usb remove\n");
 779
 780        /* power off */
 781        if (!usbhs_get_dparam(priv, runtime_pwctrl))
 782                usbhsc_power_ctrl(priv, 0);
 783
 784        pm_runtime_disable(&pdev->dev);
 785
 786        usbhs_platform_call(priv, hardware_exit, pdev);
 787        usbhsc_clk_put(priv);
 788        reset_control_assert(priv->rsts);
 789        usbhs_mod_remove(priv);
 790        usbhs_fifo_remove(priv);
 791        usbhs_pipe_remove(priv);
 792
 793        return 0;
 794}
 795
 796static __maybe_unused int usbhsc_suspend(struct device *dev)
 797{
 798        struct usbhs_priv *priv = dev_get_drvdata(dev);
 799        struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 800
 801        if (mod) {
 802                usbhs_mod_call(priv, stop, priv);
 803                usbhs_mod_change(priv, -1);
 804        }
 805
 806        if (mod || !usbhs_get_dparam(priv, runtime_pwctrl))
 807                usbhsc_power_ctrl(priv, 0);
 808
 809        return 0;
 810}
 811
 812static __maybe_unused int usbhsc_resume(struct device *dev)
 813{
 814        struct usbhs_priv *priv = dev_get_drvdata(dev);
 815        struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 816
 817        if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
 818                usbhsc_power_ctrl(priv, 1);
 819                usbhs_mod_autonomy_mode(priv);
 820        }
 821
 822        usbhs_platform_call(priv, phy_reset, pdev);
 823
 824        usbhsc_schedule_notify_hotplug(pdev);
 825
 826        return 0;
 827}
 828
 829static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume);
 830
 831static struct platform_driver renesas_usbhs_driver = {
 832        .driver         = {
 833                .name   = "renesas_usbhs",
 834                .pm     = &usbhsc_pm_ops,
 835                .of_match_table = of_match_ptr(usbhs_of_match),
 836        },
 837        .probe          = usbhs_probe,
 838        .remove         = usbhs_remove,
 839};
 840
 841module_platform_driver(renesas_usbhs_driver);
 842
 843MODULE_LICENSE("GPL");
 844MODULE_DESCRIPTION("Renesas USB driver");
 845MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
 846