linux/drivers/usb/serial/io_usbvend.h
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/************************************************************************
   3 *
   4 *      USBVEND.H               Vendor-specific USB definitions
   5 *
   6 *      NOTE: This must be kept in sync with the Edgeport firmware and
   7 *      must be kept backward-compatible with older firmware.
   8 *
   9 ************************************************************************
  10 *
  11 *      Copyright (C) 1998 Inside Out Networks, Inc.
  12 *
  13 ************************************************************************/
  14
  15#if !defined(_USBVEND_H)
  16#define _USBVEND_H
  17
  18/************************************************************************
  19 *
  20 *              D e f i n e s   /   T y p e d e f s
  21 *
  22 ************************************************************************/
  23
  24//
  25// Definitions of USB product IDs
  26//
  27
  28#define USB_VENDOR_ID_ION       0x1608          // Our VID
  29#define USB_VENDOR_ID_TI        0x0451          // TI VID
  30#define USB_VENDOR_ID_AXIOHM    0x05D9          /* Axiohm VID */
  31
  32//
  33// Definitions of USB product IDs (PID)
  34// We break the USB-defined PID into an OEM Id field (upper 6 bits)
  35// and a Device Id (bottom 10 bits). The Device Id defines what
  36// device this actually is regardless of what the OEM wants to
  37// call it.
  38//
  39
  40// ION-device OEM IDs
  41#define ION_OEM_ID_ION          0               // 00h Inside Out Networks
  42#define ION_OEM_ID_NLYNX        1               // 01h NLynx Systems
  43#define ION_OEM_ID_GENERIC      2               // 02h Generic OEM
  44#define ION_OEM_ID_MAC          3               // 03h Mac Version
  45#define ION_OEM_ID_MEGAWOLF     4               // 04h Lupusb OEM Mac version (MegaWolf)
  46#define ION_OEM_ID_MULTITECH    5               // 05h Multitech Rapidports
  47#define ION_OEM_ID_AGILENT      6               // 06h AGILENT board
  48
  49
  50// ION-device Device IDs
  51// Product IDs - assigned to match middle digit of serial number (No longer true)
  52
  53#define ION_DEVICE_ID_80251_NETCHIP     0x020   // This bit is set in the PID if this edgeport hardware$
  54                                                // is based on the 80251+Netchip.
  55
  56#define ION_DEVICE_ID_GENERATION_1      0x00    // Value for 930 based edgeports
  57#define ION_DEVICE_ID_GENERATION_2      0x01    // Value for 80251+Netchip.
  58#define ION_DEVICE_ID_GENERATION_3      0x02    // Value for Texas Instruments TUSB5052 chip
  59#define ION_DEVICE_ID_GENERATION_4      0x03    // Watchport Family of products
  60#define ION_GENERATION_MASK             0x03
  61
  62#define ION_DEVICE_ID_HUB_MASK          0x0080  // This bit in the PID designates a HUB device
  63                                                // for example 8C would be a 421 4 port hub
  64                                                // and 8D would be a 2 port embedded hub
  65
  66#define EDGEPORT_DEVICE_ID_MASK                 0x0ff   // Not including OEM or GENERATION fields
  67
  68#define ION_DEVICE_ID_UNCONFIGURED_EDGE_DEVICE  0x000   // In manufacturing only
  69#define ION_DEVICE_ID_EDGEPORT_4                0x001   // Edgeport/4 RS232
  70#define ION_DEVICE_ID_EDGEPORT_8R               0x002   // Edgeport with RJ45 no Ring
  71#define ION_DEVICE_ID_RAPIDPORT_4               0x003   // Rapidport/4
  72#define ION_DEVICE_ID_EDGEPORT_4T               0x004   // Edgeport/4 RS232 for Telxon (aka "Fleetport")
  73#define ION_DEVICE_ID_EDGEPORT_2                0x005   // Edgeport/2 RS232
  74#define ION_DEVICE_ID_EDGEPORT_4I               0x006   // Edgeport/4 RS422
  75#define ION_DEVICE_ID_EDGEPORT_2I               0x007   // Edgeport/2 RS422/RS485
  76#define ION_DEVICE_ID_EDGEPORT_8RR              0x008   // Edgeport with RJ45 with Data and RTS/CTS only
  77//      ION_DEVICE_ID_EDGEPORT_8_HANDBUILT      0x009   // Hand-built Edgeport/8 (Placeholder, used in middle digit of serial number only!)
  78//      ION_DEVICE_ID_MULTIMODEM_4X56           0x00A   // MultiTech version of RP/4 (Placeholder, used in middle digit of serial number only!)
  79#define ION_DEVICE_ID_EDGEPORT_PARALLEL_PORT    0x00B   // Edgeport/(4)21 Parallel port (USS720)
  80#define ION_DEVICE_ID_EDGEPORT_421              0x00C   // Edgeport/421 Hub+RS232+Parallel
  81#define ION_DEVICE_ID_EDGEPORT_21               0x00D   // Edgeport/21  RS232+Parallel
  82#define ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU       0x00E   // Half of an Edgeport/8 (the kind with 2 EP/4s on 1 PCB)
  83#define ION_DEVICE_ID_EDGEPORT_8                0x00F   // Edgeport/8 (single-CPU)
  84#define ION_DEVICE_ID_EDGEPORT_2_DIN            0x010   // Edgeport/2 RS232 with Apple DIN connector
  85#define ION_DEVICE_ID_EDGEPORT_4_DIN            0x011   // Edgeport/4 RS232 with Apple DIN connector
  86#define ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU      0x012   // Half of an Edgeport/16 (the kind with 2 EP/8s)
  87#define ION_DEVICE_ID_EDGEPORT_COMPATIBLE       0x013   // Edgeport Compatible, for NCR, Axiohm etc. testing
  88#define ION_DEVICE_ID_EDGEPORT_8I               0x014   // Edgeport/8 RS422 (single-CPU)
  89#define ION_DEVICE_ID_EDGEPORT_1                0x015   // Edgeport/1 RS232
  90#define ION_DEVICE_ID_EPOS44                    0x016   // Half of an EPOS/44 (TIUMP BASED)
  91#define ION_DEVICE_ID_EDGEPORT_42               0x017   // Edgeport/42
  92#define ION_DEVICE_ID_EDGEPORT_412_8            0x018   // Edgeport/412 8 port part
  93#define ION_DEVICE_ID_EDGEPORT_412_4            0x019   // Edgeport/412 4 port part
  94#define ION_DEVICE_ID_EDGEPORT_22I              0x01A   // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
  95
  96// Compact Form factor TI based devices  2c, 21c, 22c, 221c
  97#define ION_DEVICE_ID_EDGEPORT_2C               0x01B   // Edgeport/2c is a TI based Edgeport/2 - Small I2c
  98#define ION_DEVICE_ID_EDGEPORT_221C             0x01C   // Edgeport/221c is a TI based Edgeport/2 with lucent chip and
  99                                                        // 2 external hub ports - Large I2C
 100#define ION_DEVICE_ID_EDGEPORT_22C              0x01D   // Edgeport/22c is a TI based Edgeport/2 with
 101                                                        // 2 external hub ports - Large I2C
 102#define ION_DEVICE_ID_EDGEPORT_21C              0x01E   // Edgeport/21c is a TI based Edgeport/2 with lucent chip
 103                                                        // Small I2C
 104
 105
 106/*
 107 *  DANGER DANGER The 0x20 bit was used to indicate a 8251/netchip GEN 2 device.
 108 *  Since the MAC, Linux, and Optimal drivers still used the old code
 109 *  I suggest that you skip the 0x20 bit when creating new PIDs
 110 */
 111
 112
 113// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
 114#define ION_DEVICE_ID_TI3410_EDGEPORT_1         0x040   // Edgeport/1 RS232
 115#define ION_DEVICE_ID_TI3410_EDGEPORT_1I        0x041   // Edgeport/1i- RS422 model
 116
 117// Ti based software switchable RS232/RS422/RS485 devices
 118#define ION_DEVICE_ID_EDGEPORT_4S               0x042   // Edgeport/4s - software switchable model
 119#define ION_DEVICE_ID_EDGEPORT_8S               0x043   // Edgeport/8s - software switchable model
 120
 121// Usb to Ethernet dongle
 122#define ION_DEVICE_ID_EDGEPORT_E                0x0E0   // Edgeport/E Usb to Ethernet
 123
 124// Edgeport TI based devices
 125#define ION_DEVICE_ID_TI_EDGEPORT_4             0x0201  // Edgeport/4 RS232
 126#define ION_DEVICE_ID_TI_EDGEPORT_2             0x0205  // Edgeport/2 RS232
 127#define ION_DEVICE_ID_TI_EDGEPORT_4I            0x0206  // Edgeport/4i RS422
 128#define ION_DEVICE_ID_TI_EDGEPORT_2I            0x0207  // Edgeport/2i RS422/RS485
 129#define ION_DEVICE_ID_TI_EDGEPORT_421           0x020C  // Edgeport/421 4 hub 2 RS232 + Parallel (lucent on a different hub port)
 130#define ION_DEVICE_ID_TI_EDGEPORT_21            0x020D  // Edgeport/21 2 RS232 + Parallel (lucent on a different hub port)
 131#define ION_DEVICE_ID_TI_EDGEPORT_416           0x0212  // Edgeport/416
 132#define ION_DEVICE_ID_TI_EDGEPORT_1             0x0215  // Edgeport/1 RS232
 133#define ION_DEVICE_ID_TI_EDGEPORT_42            0x0217  // Edgeport/42 4 hub 2 RS232
 134#define ION_DEVICE_ID_TI_EDGEPORT_22I           0x021A  // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
 135#define ION_DEVICE_ID_TI_EDGEPORT_2C            0x021B  // Edgeport/2c RS232
 136#define ION_DEVICE_ID_TI_EDGEPORT_221C          0x021C  // Edgeport/221c is a TI based Edgeport/2 with lucent chip and
 137                                                        // 2 external hub ports - Large I2C
 138#define ION_DEVICE_ID_TI_EDGEPORT_22C           0x021D  // Edgeport/22c is a TI based Edgeport/2 with
 139                                                        // 2 external hub ports - Large I2C
 140#define ION_DEVICE_ID_TI_EDGEPORT_21C           0x021E  // Edgeport/21c is a TI based Edgeport/2 with lucent chip
 141
 142// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
 143#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1      0x0240  // Edgeport/1 RS232
 144#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I     0x0241  // Edgeport/1i- RS422 model
 145
 146// Ti based software switchable RS232/RS422/RS485 devices
 147#define ION_DEVICE_ID_TI_EDGEPORT_4S            0x0242  // Edgeport/4s - software switchable model
 148#define ION_DEVICE_ID_TI_EDGEPORT_8S            0x0243  // Edgeport/8s - software switchable model
 149#define ION_DEVICE_ID_TI_EDGEPORT_8             0x0244  // Edgeport/8 (single-CPU)
 150#define ION_DEVICE_ID_TI_EDGEPORT_416B          0x0247  // Edgeport/416
 151
 152
 153/************************************************************************
 154 *
 155 *                        Generation 4 devices
 156 *
 157 ************************************************************************/
 158
 159// Watchport based on 3410 both 1-wire and binary products (16K I2C)
 160#define ION_DEVICE_ID_WP_UNSERIALIZED           0x300   // Watchport based on 3410 both 1-wire and binary products
 161#define ION_DEVICE_ID_WP_PROXIMITY              0x301   // Watchport/P Discontinued
 162#define ION_DEVICE_ID_WP_MOTION                 0x302   // Watchport/M
 163#define ION_DEVICE_ID_WP_MOISTURE               0x303   // Watchport/W
 164#define ION_DEVICE_ID_WP_TEMPERATURE            0x304   // Watchport/T
 165#define ION_DEVICE_ID_WP_HUMIDITY               0x305   // Watchport/H
 166
 167#define ION_DEVICE_ID_WP_POWER                  0x306   // Watchport
 168#define ION_DEVICE_ID_WP_LIGHT                  0x307   // Watchport
 169#define ION_DEVICE_ID_WP_RADIATION              0x308   // Watchport
 170#define ION_DEVICE_ID_WP_ACCELERATION           0x309   // Watchport/A
 171#define ION_DEVICE_ID_WP_DISTANCE               0x30A   // Watchport/D Discontinued
 172#define ION_DEVICE_ID_WP_PROX_DIST              0x30B   // Watchport/D uses distance sensor
 173                                                        // Default to /P function
 174
 175#define ION_DEVICE_ID_PLUS_PWR_HP4CD            0x30C   // 5052 Plus Power HubPort/4CD+ (for Dell)
 176#define ION_DEVICE_ID_PLUS_PWR_HP4C             0x30D   // 5052 Plus Power HubPort/4C+
 177#define ION_DEVICE_ID_PLUS_PWR_PCI              0x30E   // 3410 Plus Power PCI Host Controller 4 port
 178
 179
 180//
 181// Definitions for AXIOHM USB product IDs
 182//
 183#define USB_VENDOR_ID_AXIOHM                    0x05D9  // Axiohm VID
 184
 185#define AXIOHM_DEVICE_ID_MASK                   0xffff
 186#define AXIOHM_DEVICE_ID_EPIC_A758              0xA758
 187#define AXIOHM_DEVICE_ID_EPIC_A794              0xA794
 188#define AXIOHM_DEVICE_ID_EPIC_A225              0xA225
 189
 190
 191//
 192// Definitions for NCR USB product IDs
 193//
 194#define USB_VENDOR_ID_NCR                       0x0404  // NCR VID
 195
 196#define NCR_DEVICE_ID_MASK                      0xffff
 197#define NCR_DEVICE_ID_EPIC_0202                 0x0202
 198#define NCR_DEVICE_ID_EPIC_0203                 0x0203
 199#define NCR_DEVICE_ID_EPIC_0310                 0x0310
 200#define NCR_DEVICE_ID_EPIC_0311                 0x0311
 201#define NCR_DEVICE_ID_EPIC_0312                 0x0312
 202
 203
 204//
 205// Definitions for SYMBOL USB product IDs
 206//
 207#define USB_VENDOR_ID_SYMBOL                    0x05E0  // Symbol VID
 208#define SYMBOL_DEVICE_ID_MASK                   0xffff
 209#define SYMBOL_DEVICE_ID_KEYFOB                 0x0700
 210
 211
 212//
 213// Definitions for other product IDs
 214#define ION_DEVICE_ID_MT4X56USB                 0x1403  // OEM device
 215
 216
 217#define GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)                            \
 218                        ((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)))
 219
 220#define MAKE_USB_PRODUCT_ID(OemId, DeviceId)                                    \
 221                        ((__u16) (((OemId) << 10) || (DeviceId)))
 222
 223#define DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId)                                \
 224                        ((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)))
 225
 226#define OEM_ID_FROM_USB_PRODUCT_ID(ProductId)                                   \
 227                        ((__u16) (((ProductId) >> 10) & 0x3F))
 228
 229//
 230// Definitions of parameters for download code. Note that these are
 231// specific to a given version of download code and must change if the
 232// corresponding download code changes.
 233//
 234
 235// TxCredits value below which driver won't bother sending (to prevent too many small writes).
 236// Send only if above 25%
 237#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize)))
 238
 239#define EDGE_FW_BULK_MAX_PACKET_SIZE            64      // Max Packet Size for Bulk In Endpoint (EP1)
 240#define EDGE_FW_BULK_READ_BUFFER_SIZE           1024    // Size to use for Bulk reads
 241
 242#define EDGE_FW_INT_MAX_PACKET_SIZE             32      // Max Packet Size for Interrupt In Endpoint
 243                                                        // Note that many units were shipped with MPS=16, we
 244                                                        // force an upgrade to this value).
 245#define EDGE_FW_INT_INTERVAL                    2       // 2ms polling on IntPipe
 246
 247
 248//
 249// Definitions of I/O Networks vendor-specific requests
 250// for default endpoint
 251//
 252//      bmRequestType = 01000000        Set vendor-specific, to device
 253//      bmRequestType = 11000000        Get vendor-specific, to device
 254//
 255// These are the definitions for the bRequest field for the
 256// above bmRequestTypes.
 257//
 258// For the read/write Edgeport memory commands, the parameters
 259// are as follows:
 260//              wValue = 16-bit address
 261//              wIndex = unused (though we could put segment 00: or FF: here)
 262//              wLength = # bytes to read/write (max 64)
 263//
 264
 265#define USB_REQUEST_ION_RESET_DEVICE    0       // Warm reboot Edgeport, retaining USB address
 266#define USB_REQUEST_ION_GET_EPIC_DESC   1       // Get Edgeport Compatibility Descriptor
 267// unused                               2       // Unused, available
 268#define USB_REQUEST_ION_READ_RAM        3       // Read  EdgePort RAM at specified addr
 269#define USB_REQUEST_ION_WRITE_RAM       4       // Write EdgePort RAM at specified addr
 270#define USB_REQUEST_ION_READ_ROM        5       // Read  EdgePort ROM at specified addr
 271#define USB_REQUEST_ION_WRITE_ROM       6       // Write EdgePort ROM at specified addr
 272#define USB_REQUEST_ION_EXEC_DL_CODE    7       // Begin execution of RAM-based download
 273                                                // code by jumping to address in wIndex:wValue
 274//                                      8       // Unused, available
 275#define USB_REQUEST_ION_ENABLE_SUSPEND  9       // Enable/Disable suspend feature
 276                                                // (wValue != 0: Enable; wValue = 0: Disable)
 277
 278#define USB_REQUEST_ION_SEND_IOSP       10      // Send an IOSP command to the edgeport over the control pipe
 279#define USB_REQUEST_ION_RECV_IOSP       11      // Receive an IOSP command from the edgeport over the control pipe
 280
 281
 282#define USB_REQUEST_ION_DIS_INT_TIMER   0x80    // Sent to Axiohm to enable/ disable
 283                                                // interrupt token timer
 284                                                // wValue = 1, enable (default)
 285                                                // wValue = 0, disable
 286
 287//
 288// Define parameter values for our vendor-specific commands
 289//
 290
 291//
 292// Edgeport Compatibility Descriptor
 293//
 294// This descriptor is only returned by Edgeport-compatible devices
 295// supporting the EPiC spec. True ION devices do not return this
 296// descriptor, but instead return STALL on receipt of the
 297// GET_EPIC_DESC command. The driver interprets a STALL to mean that
 298// this is a "real" Edgeport.
 299//
 300
 301struct edge_compatibility_bits {
 302        // This __u32 defines which Vendor-specific commands/functionality
 303        // the device supports on the default EP0 pipe.
 304
 305        __u32   VendEnableSuspend       :  1;   // 0001 Set if device supports ION_ENABLE_SUSPEND
 306        __u32   VendUnused              : 31;   // Available for future expansion, must be 0
 307
 308        // This __u32 defines which IOSP commands are supported over the
 309        // bulk pipe EP1.
 310
 311                                                                                        // xxxx Set if device supports:
 312        __u32   IOSPOpen                :  1;   // 0001 OPEN / OPEN_RSP (Currently must be 1)
 313        __u32   IOSPClose               :  1;   // 0002 CLOSE
 314        __u32   IOSPChase               :  1;   // 0004 CHASE / CHASE_RSP
 315        __u32   IOSPSetRxFlow           :  1;   // 0008 SET_RX_FLOW
 316        __u32   IOSPSetTxFlow           :  1;   // 0010 SET_TX_FLOW
 317        __u32   IOSPSetXChar            :  1;   // 0020 SET_XON_CHAR/SET_XOFF_CHAR
 318        __u32   IOSPRxCheck             :  1;   // 0040 RX_CHECK_REQ/RX_CHECK_RSP
 319        __u32   IOSPSetClrBreak         :  1;   // 0080 SET_BREAK/CLEAR_BREAK
 320        __u32   IOSPWriteMCR            :  1;   // 0100 MCR register writes (set/clr DTR/RTS)
 321        __u32   IOSPWriteLCR            :  1;   // 0200 LCR register writes (wordlen/stop/parity)
 322        __u32   IOSPSetBaudRate         :  1;   // 0400 setting Baud rate (writes to LCR.80h and DLL/DLM register)
 323        __u32   IOSPDisableIntPipe      :  1;   // 0800 Do not use the interrupt pipe for TxCredits or RxButesAvailable
 324        __u32   IOSPRxDataAvail         :  1;   // 1000 Return status of RX Fifo (Data available in Fifo)
 325        __u32   IOSPTxPurge             :  1;   // 2000 Purge TXBuffer and/or Fifo in Edgeport hardware
 326        __u32   IOSPUnused              : 18;   // Available for future expansion, must be 0
 327
 328        // This __u32 defines which 'general' features are supported
 329
 330        __u32   TrueEdgeport            :  1;   // 0001 Set if device is a 'real' Edgeport
 331                                                                                        // (Used only by driver, NEVER set by an EPiC device)
 332        __u32   GenUnused               : 31;   // Available for future expansion, must be 0
 333};
 334
 335#define EDGE_COMPATIBILITY_MASK0        0x0001
 336#define EDGE_COMPATIBILITY_MASK1        0x3FFF
 337#define EDGE_COMPATIBILITY_MASK2        0x0001
 338
 339struct edge_compatibility_descriptor {
 340        __u8    Length;                         // Descriptor Length (per USB spec)
 341        __u8    DescType;                       // Descriptor Type (per USB spec, =DEVICE type)
 342        __u8    EpicVer;                        // Version of EPiC spec supported
 343                                                // (Currently must be 1)
 344        __u8    NumPorts;                       // Number of serial ports supported
 345        __u8    iDownloadFile;                  // Index of string containing download code filename
 346                                                // 0=no download, FF=download compiled into driver.
 347        __u8    Unused[3];                      // Available for future expansion, must be 0
 348                                                // (Currently must be 0).
 349        __u8    MajorVersion;                   // Firmware version: xx.
 350        __u8    MinorVersion;                   //  yy.
 351        __le16  BuildNumber;                    //  zzzz (LE format)
 352
 353        // The following structure contains __u32s, with each bit
 354        // specifying whether the EPiC device supports the given
 355        // command or functionality.
 356        struct edge_compatibility_bits  Supports;
 357};
 358
 359// Values for iDownloadFile
 360#define EDGE_DOWNLOAD_FILE_NONE         0       // No download requested
 361#define EDGE_DOWNLOAD_FILE_INTERNAL     0xFF    // Download the file compiled into driver (930 version)
 362#define EDGE_DOWNLOAD_FILE_I930         0xFF    // Download the file compiled into driver (930 version)
 363#define EDGE_DOWNLOAD_FILE_80251        0xFE    // Download the file compiled into driver (80251 version)
 364
 365
 366
 367/*
 368 *      Special addresses for READ/WRITE_RAM/ROM
 369 */
 370
 371// Version 1 (original) format of DeviceParams
 372#define EDGE_MANUF_DESC_ADDR_V1         0x00FF7F00
 373#define EDGE_MANUF_DESC_LEN_V1          sizeof(EDGE_MANUF_DESCRIPTOR_V1)
 374
 375// Version 2 format of DeviceParams. This format is longer (3C0h)
 376// and starts lower in memory, at the uppermost 1K in ROM.
 377#define EDGE_MANUF_DESC_ADDR            0x00FF7C00
 378#define EDGE_MANUF_DESC_LEN             sizeof(struct edge_manuf_descriptor)
 379
 380// Boot params descriptor
 381#define EDGE_BOOT_DESC_ADDR             0x00FF7FC0
 382#define EDGE_BOOT_DESC_LEN              sizeof(struct edge_boot_descriptor)
 383
 384// Define the max block size that may be read or written
 385// in a read/write RAM/ROM command.
 386#define MAX_SIZE_REQ_ION_READ_MEM       ((__u16)64)
 387#define MAX_SIZE_REQ_ION_WRITE_MEM      ((__u16)64)
 388
 389
 390//
 391// Notes for the following two ION vendor-specific param descriptors:
 392//
 393//      1.      These have a standard USB descriptor header so they look like a
 394//              normal descriptor.
 395//      2.      Any strings in the structures are in USB-defined string
 396//              descriptor format, so that they may be separately retrieved,
 397//              if necessary, with a minimum of work on the 930. This also
 398//              requires them to be in UNICODE format, which, for English at
 399//              least, simply means extending each __u8 into a __u16.
 400//      3.      For all fields, 00 means 'uninitialized'.
 401//      4.      All unused areas should be set to 00 for future expansion.
 402//
 403
 404// This structure is ver 2 format. It contains ALL USB descriptors as
 405// well as the configuration parameters that were in the original V1
 406// structure. It is NOT modified when new boot code is downloaded; rather,
 407// these values are set or modified by manufacturing. It is located at
 408// xC00-xFBF (length 3C0h) in the ROM.
 409// This structure is a superset of the v1 structure and is arranged so
 410// that all of the v1 fields remain at the same address. We are just
 411// adding more room to the front of the structure to hold the descriptors.
 412//
 413// The actual contents of this structure are defined in a 930 assembly
 414// file, converted to a binary image, and then written by the serialization
 415// program. The C definition of this structure just defines a dummy
 416// area for general USB descriptors and the descriptor tables (the root
 417// descriptor starts at xC00). At the bottom of the structure are the
 418// fields inherited from the v1 structure.
 419
 420#define MAX_SERIALNUMBER_LEN    12
 421#define MAX_ASSEMBLYNUMBER_LEN  14
 422
 423struct edge_manuf_descriptor {
 424
 425        __u16   RootDescTable[0x10];                    // C00 Root of descriptor tables (just a placeholder)
 426        __u8    DescriptorArea[0x2E0];                  // C20 Descriptors go here, up to 2E0h (just a placeholder)
 427
 428                                                        //     Start of v1-compatible section
 429        __u8    Length;                                 // F00 Desc length for what follows, per USB (= C0h )
 430        __u8    DescType;                               // F01 Desc type, per USB (=DEVICE type)
 431        __u8    DescVer;                                // F02 Desc version/format (currently 2)
 432        __u8    NumRootDescEntries;                     // F03 # entries in RootDescTable
 433
 434        __u8    RomSize;                                // F04 Size of ROM/E2PROM in K
 435        __u8    RamSize;                                // F05 Size of external RAM in K
 436        __u8    CpuRev;                                 // F06 CPU revision level (chg only if s/w visible)
 437        __u8    BoardRev;                               // F07 PCB revision level (chg only if s/w visible)
 438
 439        __u8    NumPorts;                               // F08 Number of ports
 440        __u8    DescDate[3];                            // F09 MM/DD/YY when descriptor template was compiler,
 441                                                        //     so host can track changes to USB-only descriptors.
 442
 443        __u8    SerNumLength;                           // F0C USB string descriptor len
 444        __u8    SerNumDescType;                         // F0D USB descriptor type (=STRING type)
 445        __le16  SerialNumber[MAX_SERIALNUMBER_LEN];     // F0E "01-01-000100" Unicode Serial Number
 446
 447        __u8    AssemblyNumLength;                      // F26 USB string descriptor len
 448        __u8    AssemblyNumDescType;                    // F27 USB descriptor type (=STRING type)
 449        __le16  AssemblyNumber[MAX_ASSEMBLYNUMBER_LEN]; // F28 "350-1000-01-A " assembly number
 450
 451        __u8    OemAssyNumLength;                       // F44 USB string descriptor len
 452        __u8    OemAssyNumDescType;                     // F45 USB descriptor type (=STRING type)
 453        __le16  OemAssyNumber[MAX_ASSEMBLYNUMBER_LEN];  // F46 "xxxxxxxxxxxxxx" OEM assembly number
 454
 455        __u8    ManufDateLength;                        // F62 USB string descriptor len
 456        __u8    ManufDateDescType;                      // F63 USB descriptor type (=STRING type)
 457        __le16  ManufDate[6];                           // F64 "MMDDYY" manufacturing date
 458
 459        __u8    Reserved3[0x4D];                        // F70 -- unused, set to 0 --
 460
 461        __u8    UartType;                               // FBD Uart Type
 462        __u8    IonPid;                                 // FBE Product ID, == LSB of USB DevDesc.PID
 463                                                        //      (Note: Edgeport/4s before 11/98 will have
 464                                                        //       00 here instead of 01)
 465        __u8    IonConfig;                              // FBF Config byte for ION manufacturing use
 466                                                        // FBF end of structure, total len = 3C0h
 467
 468};
 469
 470
 471#define MANUF_DESC_VER_1        1       // Original definition of MANUF_DESC
 472#define MANUF_DESC_VER_2        2       // Ver 2, starts at xC00h len 3C0h
 473
 474
 475// Uart Types
 476// Note: Since this field was added only recently, all Edgeport/4 units
 477// shipped before 11/98 will have 00 in this field. Therefore,
 478// both 00 and 01 values mean '654.
 479#define MANUF_UART_EXAR_654_EARLY       0       // Exar 16C654 in Edgeport/4s before 11/98
 480#define MANUF_UART_EXAR_654             1       // Exar 16C654
 481#define MANUF_UART_EXAR_2852            2       // Exar 16C2852
 482
 483//
 484// Note: The CpuRev and BoardRev values do not conform to manufacturing
 485// revisions; they are to be incremented only when the CPU or hardware
 486// changes in a software-visible way, such that the 930 software or
 487// the host driver needs to handle the hardware differently.
 488//
 489
 490// Values of bottom 5 bits of CpuRev & BoardRev for
 491// Implementation 0 (ie, 930-based)
 492#define MANUF_CPU_REV_AD4               1       // 930 AD4, with EP1 Rx bug (needs RXSPM)
 493#define MANUF_CPU_REV_AD5               2       // 930 AD5, with above bug (supposedly) fixed
 494#define MANUF_CPU_80251                 0x20    // Intel 80251
 495
 496
 497#define MANUF_BOARD_REV_A               1       // Original version, == Manuf Rev A
 498#define MANUF_BOARD_REV_B               2       // Manuf Rev B, wakeup interrupt works
 499#define MANUF_BOARD_REV_C               3       // Manuf Rev C, 2/4 ports, rs232/rs422
 500#define MANUF_BOARD_REV_GENERATION_2    0x20    // Second generaiton edgeport
 501
 502
 503// Values of bottom 5 bits of CpuRev & BoardRev for
 504// Implementation 1 (ie, 251+Netchip-based)
 505#define MANUF_CPU_REV_1                 1       // C251TB Rev 1 (Need actual Intel rev here)
 506
 507#define MANUF_BOARD_REV_A               1       // First rev of 251+Netchip design
 508
 509#define MANUF_SERNUM_LENGTH             sizeof(((struct edge_manuf_descriptor *)0)->SerialNumber)
 510#define MANUF_ASSYNUM_LENGTH            sizeof(((struct edge_manuf_descriptor *)0)->AssemblyNumber)
 511#define MANUF_OEMASSYNUM_LENGTH         sizeof(((struct edge_manuf_descriptor *)0)->OemAssyNumber)
 512#define MANUF_MANUFDATE_LENGTH          sizeof(((struct edge_manuf_descriptor *)0)->ManufDate)
 513
 514#define MANUF_ION_CONFIG_DIAG_NO_LOOP   0x20    // As below but no ext loopback test
 515#define MANUF_ION_CONFIG_DIAG           0x40    // 930 based device: 1=Run h/w diags, 0=norm
 516                                                // TIUMP Device    : 1=IONSERIAL needs to run Final Test
 517#define MANUF_ION_CONFIG_MASTER         0x80    // 930 based device:  1=Master mode, 0=Normal
 518                                                // TIUMP Device    :  1=First device on a multi TIUMP Device
 519
 520//
 521// This structure describes parameters for the boot code, and
 522// is programmed along with new boot code. These are values
 523// which are specific to a given build of the boot code. It
 524// is exactly 64 bytes long and is fixed at address FF:xFC0
 525// - FF:xFFF. Note that the 930-mandated UCONFIG bytes are
 526// included in this structure.
 527//
 528struct edge_boot_descriptor {
 529        __u8            Length;                 // C0 Desc length, per USB (= 40h)
 530        __u8            DescType;               // C1 Desc type, per USB (= DEVICE type)
 531        __u8            DescVer;                // C2 Desc version/format
 532        __u8            Reserved1;              // C3 -- unused, set to 0 --
 533
 534        __le16          BootCodeLength;         // C4 Boot code goes from FF:0000 to FF:(len-1)
 535                                                //        (LE format)
 536
 537        __u8            MajorVersion;           // C6 Firmware version: xx.
 538        __u8            MinorVersion;           // C7                   yy.
 539        __le16          BuildNumber;            // C8                   zzzz (LE format)
 540
 541        __u16           EnumRootDescTable;      // CA Root of ROM-based descriptor table
 542        __u8            NumDescTypes;           // CC Number of supported descriptor types
 543
 544        __u8            Reserved4;              // CD Fix Compiler Packing
 545
 546        __le16          Capabilities;           // CE-CF Capabilities flags (LE format)
 547        __u8            Reserved2[0x28];        // D0 -- unused, set to 0 --
 548        __u8            UConfig0;               // F8 930-defined CPU configuration byte 0
 549        __u8            UConfig1;               // F9 930-defined CPU configuration byte 1
 550        __u8            Reserved3[6];           // FA -- unused, set to 0 --
 551                                                // FF end of structure, total len = 80
 552};
 553
 554
 555#define BOOT_DESC_VER_1         1       // Original definition of BOOT_PARAMS
 556#define BOOT_DESC_VER_2         2       // 2nd definition, descriptors not included in boot
 557
 558
 559        // Capabilities flags
 560
 561#define BOOT_CAP_RESET_CMD      0x0001  // If set, boot correctly supports ION_RESET_DEVICE
 562
 563
 564/************************************************************************
 565                 T I   U M P   D E F I N I T I O N S
 566 ***********************************************************************/
 567
 568// Chip definitions in I2C
 569#define UMP5152                 0x52
 570#define UMP3410                 0x10
 571
 572
 573//************************************************************************
 574//      TI I2C Format Definitions
 575//************************************************************************
 576#define I2C_DESC_TYPE_INFO_BASIC        0x01
 577#define I2C_DESC_TYPE_FIRMWARE_BASIC    0x02
 578#define I2C_DESC_TYPE_DEVICE            0x03
 579#define I2C_DESC_TYPE_CONFIG            0x04
 580#define I2C_DESC_TYPE_STRING            0x05
 581#define I2C_DESC_TYPE_FIRMWARE_AUTO     0x07    // for 3410 download
 582#define I2C_DESC_TYPE_CONFIG_KLUDGE     0x14    // for 3410
 583#define I2C_DESC_TYPE_WATCHPORT_VERSION 0x15    // firmware version number for watchport
 584#define I2C_DESC_TYPE_WATCHPORT_CALIBRATION_DATA 0x16   // Watchport Calibration Data
 585
 586#define I2C_DESC_TYPE_FIRMWARE_BLANK    0xf2
 587
 588// Special section defined by ION
 589#define I2C_DESC_TYPE_ION               0       // Not defined by TI
 590
 591
 592struct ti_i2c_desc {
 593        __u8    Type;                   // Type of descriptor
 594        __le16  Size;                   // Size of data only not including header
 595        __u8    CheckSum;               // Checksum (8 bit sum of data only)
 596        __u8    Data[0];                // Data starts here
 597} __attribute__((packed));
 598
 599// for 5152 devices only (type 2 record)
 600// for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor
 601struct ti_i2c_firmware_rec {
 602        __u8    Ver_Major;              // Firmware Major version number
 603        __u8    Ver_Minor;              // Firmware Minor version number
 604        __u8    Data[0];                // Download starts here
 605} __attribute__((packed));
 606
 607
 608struct watchport_firmware_version {
 609// Added 2 bytes for version number
 610        __u8    Version_Major;          //  Download Version (for Watchport)
 611        __u8    Version_Minor;
 612} __attribute__((packed));
 613
 614
 615// Structure of header of download image in fw_down.h
 616struct ti_i2c_image_header {
 617        __le16  Length;
 618        __u8    CheckSum;
 619} __attribute__((packed));
 620
 621struct ti_basic_descriptor {
 622        __u8    Power;          // Self powered
 623                                // bit 7: 1 - power switching supported
 624                                //        0 - power switching not supported
 625                                //
 626                                // bit 0: 1 - self powered
 627                                //        0 - bus powered
 628                                //
 629                                //
 630        __u16   HubVid;         // VID HUB
 631        __u16   HubPid;         // PID HUB
 632        __u16   DevPid;         // PID Edgeport
 633        __u8    HubTime;        // Time for power on to power good
 634        __u8    HubCurrent;     // HUB Current = 100ma
 635} __attribute__((packed));
 636
 637
 638// CPU / Board Rev Definitions
 639#define TI_CPU_REV_5052                 2       // 5052 based edgeports
 640#define TI_CPU_REV_3410                 3       // 3410 based edgeports
 641
 642#define TI_BOARD_REV_TI_EP              0       // Basic ti based edgeport
 643#define TI_BOARD_REV_COMPACT            1       // Compact board
 644#define TI_BOARD_REV_WATCHPORT          2       // Watchport
 645
 646
 647#define TI_GET_CPU_REVISION(x)          (__u8)((((x)>>4)&0x0f))
 648#define TI_GET_BOARD_REVISION(x)        (__u8)(((x)&0x0f))
 649
 650#define TI_I2C_SIZE_MASK                0x1f  // 5 bits
 651#define TI_GET_I2C_SIZE(x)              ((((x) & TI_I2C_SIZE_MASK)+1)*256)
 652
 653#define TI_MAX_I2C_SIZE                 (16 * 1024)
 654
 655#define TI_MANUF_VERSION_0              0
 656
 657// IonConig2 flags
 658#define TI_CONFIG2_RS232                0x01
 659#define TI_CONFIG2_RS422                0x02
 660#define TI_CONFIG2_RS485                0x04
 661#define TI_CONFIG2_SWITCHABLE           0x08
 662
 663#define TI_CONFIG2_WATCHPORT            0x10
 664
 665
 666struct edge_ti_manuf_descriptor {
 667        __u8 IonConfig;         //  Config byte for ION manufacturing use
 668        __u8 IonConfig2;        //  Expansion
 669        __u8 Version;           //  Version
 670        __u8 CpuRev_BoardRev;   //  CPU revision level (0xF0) and Board Rev Level (0x0F)
 671        __u8 NumPorts;          //  Number of ports     for this UMP
 672        __u8 NumVirtualPorts;   //  Number of Virtual ports
 673        __u8 HubConfig1;        //  Used to configure the Hub
 674        __u8 HubConfig2;        //  Used to configure the Hub
 675        __u8 TotalPorts;        //  Total Number of Com Ports for the entire device (All UMPs)
 676        __u8 Reserved;          //  Reserved
 677} __attribute__((packed));
 678
 679
 680#endif          // if !defined(_USBVEND_H)
 681