1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * linux/mdio.h: definitions for MDIO (clause 45) transceivers 4 * Copyright 2006-2009 Solarflare Communications Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published 8 * by the Free Software Foundation, incorporated herein by reference. 9 */ 10 11#ifndef _UAPI__LINUX_MDIO_H__ 12#define _UAPI__LINUX_MDIO_H__ 13 14#include <linux/types.h> 15#include <linux/mii.h> 16 17/* MDIO Manageable Devices (MMDs). */ 18#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ 19 * Physical Medium Dependent */ 20#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ 21#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ 22#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ 23#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ 24#define MDIO_MMD_TC 6 /* Transmission Convergence */ 25#define MDIO_MMD_AN 7 /* Auto-Negotiation */ 26#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ 27#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ 28#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ 29 30/* Generic MDIO registers. */ 31#define MDIO_CTRL1 MII_BMCR 32#define MDIO_STAT1 MII_BMSR 33#define MDIO_DEVID1 MII_PHYSID1 34#define MDIO_DEVID2 MII_PHYSID2 35#define MDIO_SPEED 4 /* Speed ability */ 36#define MDIO_DEVS1 5 /* Devices in package */ 37#define MDIO_DEVS2 6 38#define MDIO_CTRL2 7 /* 10G control 2 */ 39#define MDIO_STAT2 8 /* 10G status 2 */ 40#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ 41#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ 42#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ 43#define MDIO_PKGID1 14 /* Package identifier */ 44#define MDIO_PKGID2 15 45#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ 46#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ 47#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ 48#define MDIO_PCS_EEE_ABLE2 21 /* EEE Capability register 2 */ 49#define MDIO_PMA_NG_EXTABLE 21 /* 2.5G/5G PMA/PMD extended ability */ 50#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ 51#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ 52#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ 53#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ 54#define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */ 55#define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */ 56 57/* Media-dependent registers. */ 58#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ 59#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ 60#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. 61 * Lanes B-D are numbered 134-136. */ 62#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ 63#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ 64#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ 65#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ 66#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ 67#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ 68 69/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ 70#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ 71#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ 72#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ 73#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ 74#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ 75#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ 76 77/* Control register 1. */ 78/* Enable extended speed selection */ 79#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) 80/* All speed selection bits */ 81#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) 82#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX 83#define MDIO_CTRL1_LPOWER BMCR_PDOWN 84#define MDIO_CTRL1_RESET BMCR_RESET 85#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 86#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 87#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 88#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK 89#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK 90#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART 91#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE 92#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ 93#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ 94 95/* 10 Gb/s */ 96#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) 97/* 10PASS-TS/2BASE-TL */ 98#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) 99/* 2.5 Gb/s */ 100#define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18) 101/* 5 Gb/s */ 102#define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c) 103 104/* Status register 1. */ 105#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ 106#define MDIO_STAT1_LSTATUS BMSR_LSTATUS 107#define MDIO_STAT1_FAULT 0x0080 /* Fault */ 108#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ 109#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE 110#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT 111#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE 112#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ 113#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ 114 115/* Speed register. */ 116#define MDIO_SPEED_10G 0x0001 /* 10G capable */ 117#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ 118#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ 119#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ 120#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ 121#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ 122#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ 123 124/* Device present registers. */ 125#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) 126#define MDIO_DEVS_C22PRESENT MDIO_DEVS_PRESENT(0) 127#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) 128#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) 129#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) 130#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) 131#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) 132#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) 133#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) 134#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) 135#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) 136#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) 137 138/* Control register 2. */ 139#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ 140#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ 141#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ 142#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ 143#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ 144#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ 145#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ 146#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ 147#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ 148#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ 149#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ 150#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ 151#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ 152#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ 153#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ 154#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ 155#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ 156#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ 157#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ 158#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ 159#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ 160#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ 161#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ 162#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ 163 164/* Status register 2. */ 165#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ 166#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ 167#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ 168#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ 169#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ 170#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ 171#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ 172#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ 173#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ 174#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ 175#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ 176#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ 177#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ 178#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ 179#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 180#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 181#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ 182#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ 183#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ 184#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 185#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 186 187/* Transmit disable register. */ 188#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ 189#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ 190#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ 191#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ 192#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ 193 194/* Receive signal detect register. */ 195#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ 196#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ 197#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ 198#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ 199#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ 200 201/* Extended abilities register. */ 202#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ 203#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ 204#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ 205#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ 206#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ 207#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ 208#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ 209#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ 210#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ 211#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ 212 213/* PHY XGXS lane state register. */ 214#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 215#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 216#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 217#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 218#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 219 220/* PMA 10GBASE-T pair swap & polarity */ 221#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ 222#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ 223#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ 224#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ 225#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ 226#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ 227 228/* PMA 10GBASE-T TX power register. */ 229#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ 230 231/* PMA 10GBASE-T SNR registers. */ 232/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ 233#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 234#define MDIO_PMA_10GBT_SNR_MAX 127 235 236/* PMA 10GBASE-R FEC ability register. */ 237#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ 238#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ 239 240/* PCS 10GBASE-R/-T status register 1. */ 241#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ 242 243/* PCS 10GBASE-R/-T status register 2. */ 244#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff 245#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 246 247/* AN 10GBASE-T control register. */ 248#define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */ 249#define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */ 250#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ 251 252/* AN 10GBASE-T status register. */ 253#define MDIO_AN_10GBT_STAT_LP2_5G 0x0020 /* LP is 2.5GBT capable */ 254#define MDIO_AN_10GBT_STAT_LP5G 0x0040 /* LP is 5GBT capable */ 255#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ 256#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ 257#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ 258#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ 259#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ 260#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ 261#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ 262 263/* EEE Supported/Advertisement/LP Advertisement registers. 264 * 265 * EEE capability Register (3.20), Advertisement (7.60) and 266 * Link partner ability (7.61) registers have and can use the same identical 267 * bit masks. 268 */ 269#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ 270#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ 271/* Note: the two defines above can be potentially used by the user-land 272 * and cannot remove them now. 273 * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros 274 * using the previous ones (that can be considered obsolete). 275 */ 276#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ 277#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ 278#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ 279#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ 280#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ 281#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ 282#define MDIO_EEE_40GR_FW 0x0100 /* 40G R fast wake */ 283#define MDIO_EEE_40GR_DS 0x0200 /* 40G R deep sleep */ 284#define MDIO_EEE_100GR_FW 0x1000 /* 100G R fast wake */ 285#define MDIO_EEE_100GR_DS 0x2000 /* 100G R deep sleep */ 286 287#define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */ 288#define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */ 289 290/* 2.5G/5G Extended abilities register. */ 291#define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */ 292#define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */ 293 294/* LASI RX_ALARM control/status registers. */ 295#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ 296#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ 297#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ 298#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ 299#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ 300 301/* LASI TX_ALARM control/status registers. */ 302#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ 303#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ 304#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ 305#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ 306#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ 307#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ 308 309/* LASI control/status registers. */ 310#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ 311#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ 312#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ 313 314/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ 315 316#define MDIO_PHY_ID_C45 0x8000 317#define MDIO_PHY_ID_PRTAD 0x03e0 318#define MDIO_PHY_ID_DEVAD 0x001f 319#define MDIO_PHY_ID_C45_MASK \ 320 (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) 321 322static inline __u16 mdio_phy_id_c45(int prtad, int devad) 323{ 324 return MDIO_PHY_ID_C45 | (prtad << 5) | devad; 325} 326 327#endif /* _UAPI__LINUX_MDIO_H__ */ 328