LXR linux/drivers/misc/mei/hw.h

   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * Copyright (c) 2003-2018, Intel Corporation. All rights reserved
   4 * Intel Management Engine Interface (Intel MEI) Linux driver
   5 */
   6
   7#ifndef _MEI_HW_TYPES_H_
   8#define _MEI_HW_TYPES_H_
   9
  10#include <linux/uuid.h>
  11
  12/*
  13 * Timeouts in Seconds
  14 */
  15#define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
  16#define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
  17
  18#define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
  19#define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
  20
  21#define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
  22#define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
  23#define MEI_HBM_TIMEOUT             1  /* 1 second */
  24
  25/*
  26 * MEI Version
  27 */
  28#define HBM_MINOR_VERSION                   1
  29#define HBM_MAJOR_VERSION                   2
  30
  31/*
  32 * MEI version with PGI support
  33 */
  34#define HBM_MINOR_VERSION_PGI               1
  35#define HBM_MAJOR_VERSION_PGI               1
  36
  37/*
  38 * MEI version with Dynamic clients support
  39 */
  40#define HBM_MINOR_VERSION_DC               0
  41#define HBM_MAJOR_VERSION_DC               2
  42
  43/*
  44 * MEI version with immediate reply to enum request support
  45 */
  46#define HBM_MINOR_VERSION_IE               0
  47#define HBM_MAJOR_VERSION_IE               2
  48
  49/*
  50 * MEI version with disconnect on connection timeout support
  51 */
  52#define HBM_MINOR_VERSION_DOT              0
  53#define HBM_MAJOR_VERSION_DOT              2
  54
  55/*
  56 * MEI version with notification support
  57 */
  58#define HBM_MINOR_VERSION_EV               0
  59#define HBM_MAJOR_VERSION_EV               2
  60
  61/*
  62 * MEI version with fixed address client support
  63 */
  64#define HBM_MINOR_VERSION_FA               0
  65#define HBM_MAJOR_VERSION_FA               2
  66
  67/*
  68 * MEI version with OS ver message support
  69 */
  70#define HBM_MINOR_VERSION_OS               0
  71#define HBM_MAJOR_VERSION_OS               2
  72
  73/*
  74 * MEI version with dma ring support
  75 */
  76#define HBM_MINOR_VERSION_DR               1
  77#define HBM_MAJOR_VERSION_DR               2
  78
  79/* Host bus message command opcode */
  80#define MEI_HBM_CMD_OP_MSK                  0x7f
  81/* Host bus message command RESPONSE */
  82#define MEI_HBM_CMD_RES_MSK                 0x80
  83
  84/*
  85 * MEI Bus Message Command IDs
  86 */
  87#define HOST_START_REQ_CMD                  0x01
  88#define HOST_START_RES_CMD                  0x81
  89
  90#define HOST_STOP_REQ_CMD                   0x02
  91#define HOST_STOP_RES_CMD                   0x82
  92
  93#define ME_STOP_REQ_CMD                     0x03
  94
  95#define HOST_ENUM_REQ_CMD                   0x04
  96#define HOST_ENUM_RES_CMD                   0x84
  97
  98#define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
  99#define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
 100
 101#define CLIENT_CONNECT_REQ_CMD              0x06
 102#define CLIENT_CONNECT_RES_CMD              0x86
 103
 104#define CLIENT_DISCONNECT_REQ_CMD           0x07
 105#define CLIENT_DISCONNECT_RES_CMD           0x87
 106
 107#define MEI_FLOW_CONTROL_CMD                0x08
 108
 109#define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
 110#define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
 111#define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
 112#define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
 113
 114#define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
 115#define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
 116
 117#define MEI_HBM_NOTIFY_REQ_CMD              0x10
 118#define MEI_HBM_NOTIFY_RES_CMD              0x90
 119#define MEI_HBM_NOTIFICATION_CMD            0x11
 120
 121#define MEI_HBM_DMA_SETUP_REQ_CMD           0x12
 122#define MEI_HBM_DMA_SETUP_RES_CMD           0x92
 123
 124/*
 125 * MEI Stop Reason
 126 * used by hbm_host_stop_request.reason
 127 */
 128enum mei_stop_reason_types {
 129        DRIVER_STOP_REQUEST = 0x00,
 130        DEVICE_D1_ENTRY = 0x01,
 131        DEVICE_D2_ENTRY = 0x02,
 132        DEVICE_D3_ENTRY = 0x03,
 133        SYSTEM_S1_ENTRY = 0x04,
 134        SYSTEM_S2_ENTRY = 0x05,
 135        SYSTEM_S3_ENTRY = 0x06,
 136        SYSTEM_S4_ENTRY = 0x07,
 137        SYSTEM_S5_ENTRY = 0x08
 138};
 139
 140
 141/**
 142 * enum mei_hbm_status  - mei host bus messages return values
 143 *
 144 * @MEI_HBMS_SUCCESS           : status success
 145 * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
 146 * @MEI_HBMS_ALREADY_EXISTS    : connection already established
 147 * @MEI_HBMS_REJECTED          : connection is rejected
 148 * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
 149 * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
 150 * @MEI_HBMS_ALREADY_STARTED   : system is already started
 151 * @MEI_HBMS_NOT_STARTED       : system not started
 152 *
 153 * @MEI_HBMS_MAX               : sentinel
 154 */
 155enum mei_hbm_status {
 156        MEI_HBMS_SUCCESS           = 0,
 157        MEI_HBMS_CLIENT_NOT_FOUND  = 1,
 158        MEI_HBMS_ALREADY_EXISTS    = 2,
 159        MEI_HBMS_REJECTED          = 3,
 160        MEI_HBMS_INVALID_PARAMETER = 4,
 161        MEI_HBMS_NOT_ALLOWED       = 5,
 162        MEI_HBMS_ALREADY_STARTED   = 6,
 163        MEI_HBMS_NOT_STARTED       = 7,
 164
 165        MEI_HBMS_MAX
 166};
 167
 168
 169/*
 170 * Client Connect Status
 171 * used by hbm_client_connect_response.status
 172 */
 173enum mei_cl_connect_status {
 174        MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
 175        MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
 176        MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
 177        MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
 178        MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
 179        MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
 180};
 181
 182/*
 183 * Client Disconnect Status
 184 */
 185enum  mei_cl_disconnect_status {
 186        MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
 187};
 188
 189/**
 190 * struct mei_msg_hdr - MEI BUS Interface Section
 191 *
 192 * @me_addr: device address
 193 * @host_addr: host address
 194 * @length: message length
 195 * @reserved: reserved
 196 * @dma_ring: message is on dma ring
 197 * @internal: message is internal
 198 * @msg_complete: last packet of the message
 199 * @extension: extension of the header
 200 */
 201struct mei_msg_hdr {
 202        u32 me_addr:8;
 203        u32 host_addr:8;
 204        u32 length:9;
 205        u32 reserved:4;
 206        u32 dma_ring:1;
 207        u32 internal:1;
 208        u32 msg_complete:1;
 209        u32 extension[0];
 210} __packed;
 211
 212#define MEI_MSG_HDR_MAX 2
 213
 214struct mei_bus_message {
 215        u8 hbm_cmd;
 216        u8 data[0];
 217} __packed;
 218
 219/**
 220 * struct hbm_cl_cmd - client specific host bus command
 221 *      CONNECT, DISCONNECT, and FlOW CONTROL
 222 *
 223 * @hbm_cmd: bus message command header
 224 * @me_addr: address of the client in ME
 225 * @host_addr: address of the client in the driver
 226 * @data: generic data
 227 */
 228struct mei_hbm_cl_cmd {
 229        u8 hbm_cmd;
 230        u8 me_addr;
 231        u8 host_addr;
 232        u8 data;
 233};
 234
 235struct hbm_version {
 236        u8 minor_version;
 237        u8 major_version;
 238} __packed;
 239
 240struct hbm_host_version_request {
 241        u8 hbm_cmd;
 242        u8 reserved;
 243        struct hbm_version host_version;
 244} __packed;
 245
 246struct hbm_host_version_response {
 247        u8 hbm_cmd;
 248        u8 host_version_supported;
 249        struct hbm_version me_max_version;
 250} __packed;
 251
 252struct hbm_host_stop_request {
 253        u8 hbm_cmd;
 254        u8 reason;
 255        u8 reserved[2];
 256} __packed;
 257
 258struct hbm_host_stop_response {
 259        u8 hbm_cmd;
 260        u8 reserved[3];
 261} __packed;
 262
 263struct hbm_me_stop_request {
 264        u8 hbm_cmd;
 265        u8 reason;
 266        u8 reserved[2];
 267} __packed;
 268
 269/**
 270 * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
 271 *
 272 * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
 273 * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
 274 */
 275enum hbm_host_enum_flags {
 276        MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
 277        MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
 278};
 279
 280/**
 281 * struct hbm_host_enum_request - enumeration request from host to fw
 282 *
 283 * @hbm_cmd : bus message command header
 284 * @flags   : request flags
 285 * @reserved: reserved
 286 */
 287struct hbm_host_enum_request {
 288        u8 hbm_cmd;
 289        u8 flags;
 290        u8 reserved[2];
 291} __packed;
 292
 293struct hbm_host_enum_response {
 294        u8 hbm_cmd;
 295        u8 reserved[3];
 296        u8 valid_addresses[32];
 297} __packed;
 298
 299struct mei_client_properties {
 300        uuid_le protocol_name;
 301        u8 protocol_version;
 302        u8 max_number_of_connections;
 303        u8 fixed_address;
 304        u8 single_recv_buf:1;
 305        u8 reserved:7;
 306        u32 max_msg_length;
 307} __packed;
 308
 309struct hbm_props_request {
 310        u8 hbm_cmd;
 311        u8 me_addr;
 312        u8 reserved[2];
 313} __packed;
 314
 315struct hbm_props_response {
 316        u8 hbm_cmd;
 317        u8 me_addr;
 318        u8 status;
 319        u8 reserved[1];
 320        struct mei_client_properties client_properties;
 321} __packed;
 322
 323/**
 324 * struct hbm_add_client_request - request to add a client
 325 *     might be sent by fw after enumeration has already completed
 326 *
 327 * @hbm_cmd: bus message command header
 328 * @me_addr: address of the client in ME
 329 * @reserved: reserved
 330 * @client_properties: client properties
 331 */
 332struct hbm_add_client_request {
 333        u8 hbm_cmd;
 334        u8 me_addr;
 335        u8 reserved[2];
 336        struct mei_client_properties client_properties;
 337} __packed;
 338
 339/**
 340 * struct hbm_add_client_response - response to add a client
 341 *     sent by the host to report client addition status to fw
 342 *
 343 * @hbm_cmd: bus message command header
 344 * @me_addr: address of the client in ME
 345 * @status: if HBMS_SUCCESS then the client can now accept connections.
 346 * @reserved: reserved
 347 */
 348struct hbm_add_client_response {
 349        u8 hbm_cmd;
 350        u8 me_addr;
 351        u8 status;
 352        u8 reserved[1];
 353} __packed;
 354
 355/**
 356 * struct hbm_power_gate - power gate request/response
 357 *
 358 * @hbm_cmd: bus message command header
 359 * @reserved: reserved
 360 */
 361struct hbm_power_gate {
 362        u8 hbm_cmd;
 363        u8 reserved[3];
 364} __packed;
 365
 366/**
 367 * struct hbm_client_connect_request - connect/disconnect request
 368 *
 369 * @hbm_cmd: bus message command header
 370 * @me_addr: address of the client in ME
 371 * @host_addr: address of the client in the driver
 372 * @reserved: reserved
 373 */
 374struct hbm_client_connect_request {
 375        u8 hbm_cmd;
 376        u8 me_addr;
 377        u8 host_addr;
 378        u8 reserved;
 379} __packed;
 380
 381/**
 382 * struct hbm_client_connect_response - connect/disconnect response
 383 *
 384 * @hbm_cmd: bus message command header
 385 * @me_addr: address of the client in ME
 386 * @host_addr: address of the client in the driver
 387 * @status: status of the request
 388 */
 389struct hbm_client_connect_response {
 390        u8 hbm_cmd;
 391        u8 me_addr;
 392        u8 host_addr;
 393        u8 status;
 394} __packed;
 395
 396
 397#define MEI_FC_MESSAGE_RESERVED_LENGTH           5
 398
 399struct hbm_flow_control {
 400        u8 hbm_cmd;
 401        u8 me_addr;
 402        u8 host_addr;
 403        u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
 404} __packed;
 405
 406#define MEI_HBM_NOTIFICATION_START 1
 407#define MEI_HBM_NOTIFICATION_STOP  0
 408/**
 409 * struct hbm_notification_request - start/stop notification request
 410 *
 411 * @hbm_cmd: bus message command header
 412 * @me_addr: address of the client in ME
 413 * @host_addr: address of the client in the driver
 414 * @start:  start = 1 or stop = 0 asynchronous notifications
 415 */
 416struct hbm_notification_request {
 417        u8 hbm_cmd;
 418        u8 me_addr;
 419        u8 host_addr;
 420        u8 start;
 421} __packed;
 422
 423/**
 424 * struct hbm_notification_response - start/stop notification response
 425 *
 426 * @hbm_cmd: bus message command header
 427 * @me_addr: address of the client in ME
 428 * @host_addr: - address of the client in the driver
 429 * @status: (mei_hbm_status) response status for the request
 430 *  - MEI_HBMS_SUCCESS: successful stop/start
 431 *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
 432 *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
 433 *                         started notification.
 434 *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
 435 *                         asynchronous notifications are currently disabled.
 436 *
 437 * @start:  start = 1 or stop = 0 asynchronous notifications
 438 * @reserved: reserved
 439 */
 440struct hbm_notification_response {
 441        u8 hbm_cmd;
 442        u8 me_addr;
 443        u8 host_addr;
 444        u8 status;
 445        u8 start;
 446        u8 reserved[3];
 447} __packed;
 448
 449/**
 450 * struct hbm_notification - notification event
 451 *
 452 * @hbm_cmd: bus message command header
 453 * @me_addr:  address of the client in ME
 454 * @host_addr:  address of the client in the driver
 455 * @reserved: reserved for alignment
 456 */
 457struct hbm_notification {
 458        u8 hbm_cmd;
 459        u8 me_addr;
 460        u8 host_addr;
 461        u8 reserved[1];
 462} __packed;
 463
 464/**
 465 * struct hbm_dma_mem_dscr - dma ring
 466 *
 467 * @addr_hi: the high 32bits of 64 bit address
 468 * @addr_lo: the low  32bits of 64 bit address
 469 * @size   : size in bytes (must be power of 2)
 470 */
 471struct hbm_dma_mem_dscr {
 472        u32 addr_hi;
 473        u32 addr_lo;
 474        u32 size;
 475} __packed;
 476
 477enum {
 478        DMA_DSCR_HOST = 0,
 479        DMA_DSCR_DEVICE = 1,
 480        DMA_DSCR_CTRL = 2,
 481        DMA_DSCR_NUM,
 482};
 483
 484/**
 485 * struct hbm_dma_setup_request - dma setup request
 486 *
 487 * @hbm_cmd: bus message command header
 488 * @reserved: reserved for alignment
 489 * @dma_dscr: dma descriptor for HOST, DEVICE, and CTRL
 490 */
 491struct hbm_dma_setup_request {
 492        u8 hbm_cmd;
 493        u8 reserved[3];
 494        struct hbm_dma_mem_dscr dma_dscr[DMA_DSCR_NUM];
 495} __packed;
 496
 497/**
 498 * struct hbm_dma_setup_response - dma setup response
 499 *
 500 * @hbm_cmd: bus message command header
 501 * @status: 0 on success; otherwise DMA setup failed.
 502 * @reserved: reserved for alignment
 503 */
 504struct hbm_dma_setup_response {
 505        u8 hbm_cmd;
 506        u8 status;
 507        u8 reserved[2];
 508} __packed;
 509
 510/**
 511 * struct mei_dma_ring_ctrl - dma ring control block
 512 *
 513 * @hbuf_wr_idx: host circular buffer write index in slots
 514 * @reserved1: reserved for alignment
 515 * @hbuf_rd_idx: host circular buffer read index in slots
 516 * @reserved2: reserved for alignment
 517 * @dbuf_wr_idx: device circular buffer write index in slots
 518 * @reserved3: reserved for alignment
 519 * @dbuf_rd_idx: device circular buffer read index in slots
 520 * @reserved4: reserved for alignment
 521 */
 522struct hbm_dma_ring_ctrl {
 523        u32 hbuf_wr_idx;
 524        u32 reserved1;
 525        u32 hbuf_rd_idx;
 526        u32 reserved2;
 527        u32 dbuf_wr_idx;
 528        u32 reserved3;
 529        u32 dbuf_rd_idx;
 530        u32 reserved4;
 531} __packed;
 532
 533#endif
 534