// SPDX-License-Identifier: GPL-2.0-only
/*
 * This file is part of wl1251
 *
 * Copyright (c) 1998-2007 Texas Instruments Incorporated
 * Copyright (C) 2008 Nokia Corporation
 */

#include <linux/skbuff.h>
#include <linux/gfp.h>
#include <net/mac80211.h>

#include "wl1251.h"
#include "reg.h"
#include "io.h"
#include "rx.h"
#include "cmd.h"
#include "acx.h"

static void wl1251_rx_header(struct wl1251 *wl,
                             struct wl1251_rx_descriptor *desc)
{
        u32 rx_packet_ring_addr;

        rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
        if (wl->rx_current_buffer)
                rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;

        wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc));
}

static void wl1251_rx_status(struct wl1251 *wl,
                             struct wl1251_rx_descriptor *desc,
                             struct ieee80211_rx_status *status,
                             u8 beacon)
{
        u64 mactime;
        int ret;

        memset(status, 0, sizeof(struct ieee80211_rx_status));

        status->band = NL80211_BAND_2GHZ;
        status->mactime = desc->timestamp;

        /*
         * The rx status timestamp is a 32 bits value while the TSF is a
         * 64 bits one.
         * For IBSS merging, TSF is mandatory, so we have to get it
         * somehow, so we ask for ACX_TSF_INFO.
         * That could be moved to the get_tsf() hook, but unfortunately,
         * this one must be atomic, while our SPI routines can sleep.
         */
        if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
                ret = wl1251_acx_tsf_info(wl, &mactime);
                if (ret == 0)
                        status->mactime = mactime;
        }

        status->signal = desc->rssi;

        /*
         * FIXME: guessing that snr needs to be divided by two, otherwise
         * the values don't make any sense
         */
        wl->noise = desc->rssi - desc->snr / 2;

        status->freq = ieee80211_channel_to_frequency(desc->channel,
                                                      status->band);

        status->flag |= RX_FLAG_MACTIME_START;

        if (!wl->monitor_present && (desc->flags & RX_DESC_ENCRYPTION_MASK)) {
                status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;

                if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
                        status->flag |= RX_FLAG_DECRYPTED;

                if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
                        status->flag |= RX_FLAG_MMIC_ERROR;
        }

        if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
                status->flag |= RX_FLAG_FAILED_FCS_CRC;

        switch (desc->rate) {
                /* skip 1 and 12 Mbps because they have same value 0x0a */
        case RATE_2MBPS:
                status->rate_idx = 1;
                break;
        case RATE_5_5MBPS:
                status->rate_idx = 2;
                break;
        case RATE_11MBPS:
                status->rate_idx = 3;
                break;
        case RATE_6MBPS:
                status->rate_idx = 4;
                break;
        case RATE_9MBPS:
                status->rate_idx = 5;
                break;
        case RATE_18MBPS:
                status->rate_idx = 7;
                break;
        case RATE_24MBPS:
                status->rate_idx = 8;
                break;
        case RATE_36MBPS:
                status->rate_idx = 9;
                break;
        case RATE_48MBPS:
                status->rate_idx = 10;
                break;
        case RATE_54MBPS:
                status->rate_idx = 11;
                break;
        }

        /* for 1 and 12 Mbps we have to check the modulation */
        if (desc->rate == RATE_1MBPS) {
                if (!(desc->mod_pre & OFDM_RATE_BIT))
                        /* CCK -> RATE_1MBPS */
                        status->rate_idx = 0;
                else
                        /* OFDM -> RATE_12MBPS */
                        status->rate_idx = 6;
        }

        if (desc->mod_pre & SHORT_PREAMBLE_BIT)
                status->enc_flags |= RX_ENC_FLAG_SHORTPRE;
}

static void wl1251_rx_body(struct wl1251 *wl,
                           struct wl1251_rx_descriptor *desc)
{
        struct sk_buff *skb;
        struct ieee80211_rx_status status;
        u8 *rx_buffer, beacon = 0;
        u16 length, *fc;
        u32 curr_id, last_id_inc, rx_packet_ring_addr;

        length = WL1251_RX_ALIGN(desc->length  - PLCP_HEADER_LENGTH);
        curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
        last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);

        if (last_id_inc != curr_id) {
                wl1251_warning("curr ID:%d, last ID inc:%d",
                               curr_id, last_id_inc);
                wl->rx_last_id = curr_id;
        } else {
                wl->rx_last_id = last_id_inc;
        }

        rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
                sizeof(struct wl1251_rx_descriptor) + 20;
        if (wl->rx_current_buffer)
                rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;

        skb = __dev_alloc_skb(length, GFP_KERNEL);
        if (!skb) {
                wl1251_error("Couldn't allocate RX frame");
                return;
        }

        rx_buffer = skb_put(skb, length);
        wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);

        /* The actual length doesn't include the target's alignment */
        skb_trim(skb, desc->length - PLCP_HEADER_LENGTH);

        fc = (u16 *)skb->data;

        if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
                beacon = 1;

        wl1251_rx_status(wl, desc, &status, beacon);

        wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
                     beacon ? "beacon" : "");

        memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
        ieee80211_rx_ni(wl->hw, skb);
}

static void wl1251_rx_ack(struct wl1251 *wl)
{
        u32 data, addr;

        if (wl->rx_current_buffer) {
                addr = ACX_REG_INTERRUPT_TRIG_H;
                data = INTR_TRIG_RX_PROC1;
        } else {
                addr = ACX_REG_INTERRUPT_TRIG;
                data = INTR_TRIG_RX_PROC0;
        }

        wl1251_reg_write32(wl, addr, data);

        /* Toggle buffer ring */
        wl->rx_current_buffer = !wl->rx_current_buffer;
}


void wl1251_rx(struct wl1251 *wl)
{
        struct wl1251_rx_descriptor *rx_desc;

        if (wl->state != WL1251_STATE_ON)
                return;

        rx_desc = wl->rx_descriptor;

        /* We first read the frame's header */
        wl1251_rx_header(wl, rx_desc);

        /* Now we can read the body */
        wl1251_rx_body(wl, rx_desc);

        /* Finally, we need to ACK the RX */
        wl1251_rx_ack(wl);
}