linux/arch/x86/include/asm/x86_init.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2#ifndef _ASM_X86_PLATFORM_H
   3#define _ASM_X86_PLATFORM_H
   4
   5#include <asm/bootparam.h>
   6
   7struct ghcb;
   8struct mpc_bus;
   9struct mpc_cpu;
  10struct pt_regs;
  11struct mpc_table;
  12struct cpuinfo_x86;
  13struct irq_domain;
  14
  15/**
  16 * struct x86_init_mpparse - platform specific mpparse ops
  17 * @setup_ioapic_ids:           platform specific ioapic id override
  18 * @find_smp_config:            find the smp configuration
  19 * @get_smp_config:             get the smp configuration
  20 */
  21struct x86_init_mpparse {
  22        void (*setup_ioapic_ids)(void);
  23        void (*find_smp_config)(void);
  24        void (*get_smp_config)(unsigned int early);
  25};
  26
  27/**
  28 * struct x86_init_resources - platform specific resource related ops
  29 * @probe_roms:                 probe BIOS roms
  30 * @reserve_resources:          reserve the standard resources for the
  31 *                              platform
  32 * @memory_setup:               platform specific memory setup
  33 *
  34 */
  35struct x86_init_resources {
  36        void (*probe_roms)(void);
  37        void (*reserve_resources)(void);
  38        char *(*memory_setup)(void);
  39};
  40
  41/**
  42 * struct x86_init_irqs - platform specific interrupt setup
  43 * @pre_vector_init:            init code to run before interrupt vectors
  44 *                              are set up.
  45 * @intr_init:                  interrupt init code
  46 * @intr_mode_select:           interrupt delivery mode selection
  47 * @intr_mode_init:             interrupt delivery mode setup
  48 * @create_pci_msi_domain:      Create the PCI/MSI interrupt domain
  49 */
  50struct x86_init_irqs {
  51        void (*pre_vector_init)(void);
  52        void (*intr_init)(void);
  53        void (*intr_mode_select)(void);
  54        void (*intr_mode_init)(void);
  55        struct irq_domain *(*create_pci_msi_domain)(void);
  56};
  57
  58/**
  59 * struct x86_init_oem - oem platform specific customizing functions
  60 * @arch_setup:                 platform specific architecture setup
  61 * @banner:                     print a platform specific banner
  62 */
  63struct x86_init_oem {
  64        void (*arch_setup)(void);
  65        void (*banner)(void);
  66};
  67
  68/**
  69 * struct x86_init_paging - platform specific paging functions
  70 * @pagetable_init:     platform specific paging initialization call to setup
  71 *                      the kernel pagetables and prepare accessors functions.
  72 *                      Callback must call paging_init(). Called once after the
  73 *                      direct mapping for phys memory is available.
  74 */
  75struct x86_init_paging {
  76        void (*pagetable_init)(void);
  77};
  78
  79/**
  80 * struct x86_init_timers - platform specific timer setup
  81 * @setup_perpcu_clockev:       set up the per cpu clock event device for the
  82 *                              boot cpu
  83 * @timer_init:                 initialize the platform timer (default PIT/HPET)
  84 * @wallclock_init:             init the wallclock device
  85 */
  86struct x86_init_timers {
  87        void (*setup_percpu_clockev)(void);
  88        void (*timer_init)(void);
  89        void (*wallclock_init)(void);
  90};
  91
  92/**
  93 * struct x86_init_iommu - platform specific iommu setup
  94 * @iommu_init:                 platform specific iommu setup
  95 */
  96struct x86_init_iommu {
  97        int (*iommu_init)(void);
  98};
  99
 100/**
 101 * struct x86_init_pci - platform specific pci init functions
 102 * @arch_init:                  platform specific pci arch init call
 103 * @init:                       platform specific pci subsystem init
 104 * @init_irq:                   platform specific pci irq init
 105 * @fixup_irqs:                 platform specific pci irq fixup
 106 */
 107struct x86_init_pci {
 108        int (*arch_init)(void);
 109        int (*init)(void);
 110        void (*init_irq)(void);
 111        void (*fixup_irqs)(void);
 112};
 113
 114/**
 115 * struct x86_hyper_init - x86 hypervisor init functions
 116 * @init_platform:              platform setup
 117 * @guest_late_init:            guest late init
 118 * @x2apic_available:           X2APIC detection
 119 * @init_mem_mapping:           setup early mappings during init_mem_mapping()
 120 * @init_after_bootmem:         guest init after boot allocator is finished
 121 */
 122struct x86_hyper_init {
 123        void (*init_platform)(void);
 124        void (*guest_late_init)(void);
 125        bool (*x2apic_available)(void);
 126        void (*init_mem_mapping)(void);
 127        void (*init_after_bootmem)(void);
 128};
 129
 130/**
 131 * struct x86_init_acpi - x86 ACPI init functions
 132 * @set_root_poitner:           set RSDP address
 133 * @get_root_pointer:           get RSDP address
 134 * @reduced_hw_early_init:      hardware reduced platform early init
 135 */
 136struct x86_init_acpi {
 137        void (*set_root_pointer)(u64 addr);
 138        u64 (*get_root_pointer)(void);
 139        void (*reduced_hw_early_init)(void);
 140};
 141
 142/**
 143 * struct x86_init_ops - functions for platform specific setup
 144 *
 145 */
 146struct x86_init_ops {
 147        struct x86_init_resources       resources;
 148        struct x86_init_mpparse         mpparse;
 149        struct x86_init_irqs            irqs;
 150        struct x86_init_oem             oem;
 151        struct x86_init_paging          paging;
 152        struct x86_init_timers          timers;
 153        struct x86_init_iommu           iommu;
 154        struct x86_init_pci             pci;
 155        struct x86_hyper_init           hyper;
 156        struct x86_init_acpi            acpi;
 157};
 158
 159/**
 160 * struct x86_cpuinit_ops - platform specific cpu hotplug setups
 161 * @setup_percpu_clockev:       set up the per cpu clock event device
 162 * @early_percpu_clock_init:    early init of the per cpu clock event device
 163 */
 164struct x86_cpuinit_ops {
 165        void (*setup_percpu_clockev)(void);
 166        void (*early_percpu_clock_init)(void);
 167        void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node);
 168};
 169
 170struct timespec64;
 171
 172/**
 173 * struct x86_legacy_devices - legacy x86 devices
 174 *
 175 * @pnpbios: this platform can have a PNPBIOS. If this is disabled the platform
 176 *      is known to never have a PNPBIOS.
 177 *
 178 * These are devices known to require LPC or ISA bus. The definition of legacy
 179 * devices adheres to the ACPI 5.2.9.3 IA-PC Boot Architecture flag
 180 * ACPI_FADT_LEGACY_DEVICES. These devices consist of user visible devices on
 181 * the LPC or ISA bus. User visible devices are devices that have end-user
 182 * accessible connectors (for example, LPT parallel port). Legacy devices on
 183 * the LPC bus consist for example of serial and parallel ports, PS/2 keyboard
 184 * / mouse, and the floppy disk controller. A system that lacks all known
 185 * legacy devices can assume all devices can be detected exclusively via
 186 * standard device enumeration mechanisms including the ACPI namespace.
 187 *
 188 * A system which has does not have ACPI_FADT_LEGACY_DEVICES enabled must not
 189 * have any of the legacy devices enumerated below present.
 190 */
 191struct x86_legacy_devices {
 192        int pnpbios;
 193};
 194
 195/**
 196 * enum x86_legacy_i8042_state - i8042 keyboard controller state
 197 * @X86_LEGACY_I8042_PLATFORM_ABSENT: the controller is always absent on
 198 *      given platform/subarch.
 199 * @X86_LEGACY_I8042_FIRMWARE_ABSENT: firmware reports that the controller
 200 *      is absent.
 201 * @X86_LEGACY_i8042_EXPECTED_PRESENT: the controller is likely to be
 202 *      present, the i8042 driver should probe for controller existence.
 203 */
 204enum x86_legacy_i8042_state {
 205        X86_LEGACY_I8042_PLATFORM_ABSENT,
 206        X86_LEGACY_I8042_FIRMWARE_ABSENT,
 207        X86_LEGACY_I8042_EXPECTED_PRESENT,
 208};
 209
 210/**
 211 * struct x86_legacy_features - legacy x86 features
 212 *
 213 * @i8042: indicated if we expect the device to have i8042 controller
 214 *      present.
 215 * @rtc: this device has a CMOS real-time clock present
 216 * @reserve_bios_regions: boot code will search for the EBDA address and the
 217 *      start of the 640k - 1M BIOS region.  If false, the platform must
 218 *      ensure that its memory map correctly reserves sub-1MB regions as needed.
 219 * @devices: legacy x86 devices, refer to struct x86_legacy_devices
 220 *      documentation for further details.
 221 */
 222struct x86_legacy_features {
 223        enum x86_legacy_i8042_state i8042;
 224        int rtc;
 225        int warm_reset;
 226        int no_vga;
 227        int reserve_bios_regions;
 228        struct x86_legacy_devices devices;
 229};
 230
 231/**
 232 * struct x86_hyper_runtime - x86 hypervisor specific runtime callbacks
 233 *
 234 * @pin_vcpu:                   pin current vcpu to specified physical
 235 *                              cpu (run rarely)
 236 * @sev_es_hcall_prepare:       Load additional hypervisor-specific
 237 *                              state into the GHCB when doing a VMMCALL under
 238 *                              SEV-ES. Called from the #VC exception handler.
 239 * @sev_es_hcall_finish:        Copies state from the GHCB back into the
 240 *                              processor (or pt_regs). Also runs checks on the
 241 *                              state returned from the hypervisor after a
 242 *                              VMMCALL under SEV-ES.  Needs to return 'false'
 243 *                              if the checks fail.  Called from the #VC
 244 *                              exception handler.
 245 */
 246struct x86_hyper_runtime {
 247        void (*pin_vcpu)(int cpu);
 248        void (*sev_es_hcall_prepare)(struct ghcb *ghcb, struct pt_regs *regs);
 249        bool (*sev_es_hcall_finish)(struct ghcb *ghcb, struct pt_regs *regs);
 250};
 251
 252/**
 253 * struct x86_platform_ops - platform specific runtime functions
 254 * @calibrate_cpu:              calibrate CPU
 255 * @calibrate_tsc:              calibrate TSC, if different from CPU
 256 * @get_wallclock:              get time from HW clock like RTC etc.
 257 * @set_wallclock:              set time back to HW clock
 258 * @is_untracked_pat_range      exclude from PAT logic
 259 * @nmi_init                    enable NMI on cpus
 260 * @save_sched_clock_state:     save state for sched_clock() on suspend
 261 * @restore_sched_clock_state:  restore state for sched_clock() on resume
 262 * @apic_post_init:             adjust apic if needed
 263 * @legacy:                     legacy features
 264 * @set_legacy_features:        override legacy features. Use of this callback
 265 *                              is highly discouraged. You should only need
 266 *                              this if your hardware platform requires further
 267 *                              custom fine tuning far beyond what may be
 268 *                              possible in x86_early_init_platform_quirks() by
 269 *                              only using the current x86_hardware_subarch
 270 *                              semantics.
 271 * @hyper:                      x86 hypervisor specific runtime callbacks
 272 */
 273struct x86_platform_ops {
 274        unsigned long (*calibrate_cpu)(void);
 275        unsigned long (*calibrate_tsc)(void);
 276        void (*get_wallclock)(struct timespec64 *ts);
 277        int (*set_wallclock)(const struct timespec64 *ts);
 278        void (*iommu_shutdown)(void);
 279        bool (*is_untracked_pat_range)(u64 start, u64 end);
 280        void (*nmi_init)(void);
 281        unsigned char (*get_nmi_reason)(void);
 282        void (*save_sched_clock_state)(void);
 283        void (*restore_sched_clock_state)(void);
 284        void (*apic_post_init)(void);
 285        struct x86_legacy_features legacy;
 286        void (*set_legacy_features)(void);
 287        struct x86_hyper_runtime hyper;
 288};
 289
 290struct pci_dev;
 291
 292struct x86_msi_ops {
 293        void (*restore_msi_irqs)(struct pci_dev *dev);
 294};
 295
 296struct x86_apic_ops {
 297        unsigned int    (*io_apic_read)   (unsigned int apic, unsigned int reg);
 298        void            (*restore)(void);
 299};
 300
 301extern struct x86_init_ops x86_init;
 302extern struct x86_cpuinit_ops x86_cpuinit;
 303extern struct x86_platform_ops x86_platform;
 304extern struct x86_msi_ops x86_msi;
 305extern struct x86_apic_ops x86_apic_ops;
 306
 307extern void x86_early_init_platform_quirks(void);
 308extern void x86_init_noop(void);
 309extern void x86_init_uint_noop(unsigned int unused);
 310extern bool bool_x86_init_noop(void);
 311extern void x86_op_int_noop(int cpu);
 312extern bool x86_pnpbios_disabled(void);
 313
 314#endif
 315