linux/drivers/phy/samsung/phy-samsung-usb2.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Samsung SoC USB 1.1/2.0 PHY driver
   4 *
   5 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
   6 * Author: Kamil Debski <k.debski@samsung.com>
   7 */
   8
   9#include <linux/clk.h>
  10#include <linux/mfd/syscon.h>
  11#include <linux/module.h>
  12#include <linux/of.h>
  13#include <linux/of_address.h>
  14#include <linux/of_device.h>
  15#include <linux/phy/phy.h>
  16#include <linux/platform_device.h>
  17#include <linux/spinlock.h>
  18#include "phy-samsung-usb2.h"
  19
  20static int samsung_usb2_phy_power_on(struct phy *phy)
  21{
  22        struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
  23        struct samsung_usb2_phy_driver *drv = inst->drv;
  24        int ret;
  25
  26        dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
  27                inst->cfg->label);
  28
  29        if (drv->vbus) {
  30                ret = regulator_enable(drv->vbus);
  31                if (ret)
  32                        goto err_regulator;
  33        }
  34
  35        ret = clk_prepare_enable(drv->clk);
  36        if (ret)
  37                goto err_main_clk;
  38        ret = clk_prepare_enable(drv->ref_clk);
  39        if (ret)
  40                goto err_instance_clk;
  41        if (inst->cfg->power_on) {
  42                spin_lock(&drv->lock);
  43                ret = inst->cfg->power_on(inst);
  44                spin_unlock(&drv->lock);
  45                if (ret)
  46                        goto err_power_on;
  47        }
  48
  49        return 0;
  50
  51err_power_on:
  52        clk_disable_unprepare(drv->ref_clk);
  53err_instance_clk:
  54        clk_disable_unprepare(drv->clk);
  55err_main_clk:
  56        if (drv->vbus)
  57                regulator_disable(drv->vbus);
  58err_regulator:
  59        return ret;
  60}
  61
  62static int samsung_usb2_phy_power_off(struct phy *phy)
  63{
  64        struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
  65        struct samsung_usb2_phy_driver *drv = inst->drv;
  66        int ret = 0;
  67
  68        dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
  69                inst->cfg->label);
  70        if (inst->cfg->power_off) {
  71                spin_lock(&drv->lock);
  72                ret = inst->cfg->power_off(inst);
  73                spin_unlock(&drv->lock);
  74                if (ret)
  75                        return ret;
  76        }
  77        clk_disable_unprepare(drv->ref_clk);
  78        clk_disable_unprepare(drv->clk);
  79        if (drv->vbus)
  80                ret = regulator_disable(drv->vbus);
  81
  82        return ret;
  83}
  84
  85static const struct phy_ops samsung_usb2_phy_ops = {
  86        .power_on       = samsung_usb2_phy_power_on,
  87        .power_off      = samsung_usb2_phy_power_off,
  88        .owner          = THIS_MODULE,
  89};
  90
  91static struct phy *samsung_usb2_phy_xlate(struct device *dev,
  92                                        struct of_phandle_args *args)
  93{
  94        struct samsung_usb2_phy_driver *drv;
  95
  96        drv = dev_get_drvdata(dev);
  97        if (!drv)
  98                return ERR_PTR(-EINVAL);
  99
 100        if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
 101                return ERR_PTR(-ENODEV);
 102
 103        return drv->instances[args->args[0]].phy;
 104}
 105
 106static const struct of_device_id samsung_usb2_phy_of_match[] = {
 107#ifdef CONFIG_PHY_EXYNOS4X12_USB2
 108        {
 109                .compatible = "samsung,exynos3250-usb2-phy",
 110                .data = &exynos3250_usb2_phy_config,
 111        },
 112#endif
 113#ifdef CONFIG_PHY_EXYNOS4210_USB2
 114        {
 115                .compatible = "samsung,exynos4210-usb2-phy",
 116                .data = &exynos4210_usb2_phy_config,
 117        },
 118#endif
 119#ifdef CONFIG_PHY_EXYNOS4X12_USB2
 120        {
 121                .compatible = "samsung,exynos4x12-usb2-phy",
 122                .data = &exynos4x12_usb2_phy_config,
 123        },
 124#endif
 125#ifdef CONFIG_PHY_EXYNOS5250_USB2
 126        {
 127                .compatible = "samsung,exynos5250-usb2-phy",
 128                .data = &exynos5250_usb2_phy_config,
 129        },
 130#endif
 131#ifdef CONFIG_PHY_S5PV210_USB2
 132        {
 133                .compatible = "samsung,s5pv210-usb2-phy",
 134                .data = &s5pv210_usb2_phy_config,
 135        },
 136#endif
 137        { },
 138};
 139MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
 140
 141static int samsung_usb2_phy_probe(struct platform_device *pdev)
 142{
 143        const struct samsung_usb2_phy_config *cfg;
 144        struct device *dev = &pdev->dev;
 145        struct phy_provider *phy_provider;
 146        struct resource *mem;
 147        struct samsung_usb2_phy_driver *drv;
 148        int i, ret;
 149
 150        if (!pdev->dev.of_node) {
 151                dev_err(dev, "This driver is required to be instantiated from device tree\n");
 152                return -EINVAL;
 153        }
 154
 155        cfg = of_device_get_match_data(dev);
 156        if (!cfg)
 157                return -EINVAL;
 158
 159        drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
 160                           GFP_KERNEL);
 161        if (!drv)
 162                return -ENOMEM;
 163
 164        dev_set_drvdata(dev, drv);
 165        spin_lock_init(&drv->lock);
 166
 167        drv->cfg = cfg;
 168        drv->dev = dev;
 169
 170        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 171        drv->reg_phy = devm_ioremap_resource(dev, mem);
 172        if (IS_ERR(drv->reg_phy)) {
 173                dev_err(dev, "Failed to map register memory (phy)\n");
 174                return PTR_ERR(drv->reg_phy);
 175        }
 176
 177        drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 178                "samsung,pmureg-phandle");
 179        if (IS_ERR(drv->reg_pmu)) {
 180                dev_err(dev, "Failed to map PMU registers (via syscon)\n");
 181                return PTR_ERR(drv->reg_pmu);
 182        }
 183
 184        if (drv->cfg->has_mode_switch) {
 185                drv->reg_sys = syscon_regmap_lookup_by_phandle(
 186                                pdev->dev.of_node, "samsung,sysreg-phandle");
 187                if (IS_ERR(drv->reg_sys)) {
 188                        dev_err(dev, "Failed to map system registers (via syscon)\n");
 189                        return PTR_ERR(drv->reg_sys);
 190                }
 191        }
 192
 193        drv->clk = devm_clk_get(dev, "phy");
 194        if (IS_ERR(drv->clk)) {
 195                dev_err(dev, "Failed to get clock of phy controller\n");
 196                return PTR_ERR(drv->clk);
 197        }
 198
 199        drv->ref_clk = devm_clk_get(dev, "ref");
 200        if (IS_ERR(drv->ref_clk)) {
 201                dev_err(dev, "Failed to get reference clock for the phy controller\n");
 202                return PTR_ERR(drv->ref_clk);
 203        }
 204
 205        drv->ref_rate = clk_get_rate(drv->ref_clk);
 206        if (drv->cfg->rate_to_clk) {
 207                ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
 208                if (ret)
 209                        return ret;
 210        }
 211
 212        drv->vbus = devm_regulator_get(dev, "vbus");
 213        if (IS_ERR(drv->vbus)) {
 214                ret = PTR_ERR(drv->vbus);
 215                if (ret == -EPROBE_DEFER)
 216                        return ret;
 217                drv->vbus = NULL;
 218        }
 219
 220        for (i = 0; i < drv->cfg->num_phys; i++) {
 221                char *label = drv->cfg->phys[i].label;
 222                struct samsung_usb2_phy_instance *p = &drv->instances[i];
 223
 224                dev_dbg(dev, "Creating phy \"%s\"\n", label);
 225                p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
 226                if (IS_ERR(p->phy)) {
 227                        dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
 228                                label);
 229                        return PTR_ERR(p->phy);
 230                }
 231
 232                p->cfg = &drv->cfg->phys[i];
 233                p->drv = drv;
 234                phy_set_bus_width(p->phy, 8);
 235                phy_set_drvdata(p->phy, p);
 236        }
 237
 238        phy_provider = devm_of_phy_provider_register(dev,
 239                                                        samsung_usb2_phy_xlate);
 240        if (IS_ERR(phy_provider)) {
 241                dev_err(drv->dev, "Failed to register phy provider\n");
 242                return PTR_ERR(phy_provider);
 243        }
 244
 245        return 0;
 246}
 247
 248static struct platform_driver samsung_usb2_phy_driver = {
 249        .probe  = samsung_usb2_phy_probe,
 250        .driver = {
 251                .of_match_table = samsung_usb2_phy_of_match,
 252                .name           = "samsung-usb2-phy",
 253                .suppress_bind_attrs = true,
 254        }
 255};
 256
 257module_platform_driver(samsung_usb2_phy_driver);
 258MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
 259MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
 260MODULE_LICENSE("GPL v2");
 261MODULE_ALIAS("platform:samsung-usb2-phy");
 262