// SPDX-License-Identifier: GPL-2.0-only
/*
 * Aic94xx SAS/SATA driver SCB management.
 *
 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
 */

#include <linux/gfp.h>
#include <scsi/scsi_host.h>

#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_hwi.h"
#include "aic94xx_seq.h"

#include "aic94xx_dump.h"

/* ---------- EMPTY SCB ---------- */

#define DL_PHY_MASK      7
#define BYTES_DMAED      0
#define PRIMITIVE_RECVD  0x08
#define PHY_EVENT        0x10
#define LINK_RESET_ERROR 0x18
#define TIMER_EVENT      0x20
#define REQ_TASK_ABORT   0xF0
#define REQ_DEVICE_RESET 0xF1
#define SIGNAL_NCQ_ERROR 0xF2
#define CLEAR_NCQ_ERROR  0xF3

#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE   \
                           | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
                           | CURRENT_OOB_ERROR)

static void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
{
        struct sas_phy *sas_phy = phy->sas_phy.phy;

        switch (oob_mode & 7) {
        case PHY_SPEED_60:
                /* FIXME: sas transport class doesn't have this */
                phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
                phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
                break;
        case PHY_SPEED_30:
                phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
                phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
                break;
        case PHY_SPEED_15:
                phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
                phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
                break;
        }
        sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
        sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
        sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
        sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate;
        sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate;

        if (oob_mode & SAS_MODE)
                phy->sas_phy.oob_mode = SAS_OOB_MODE;
        else if (oob_mode & SATA_MODE)
                phy->sas_phy.oob_mode = SATA_OOB_MODE;
}

static void asd_phy_event_tasklet(struct asd_ascb *ascb,
                                         struct done_list_struct *dl)
{
        struct asd_ha_struct *asd_ha = ascb->ha;
        struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
        int phy_id = dl->status_block[0] & DL_PHY_MASK;
        struct asd_phy *phy = &asd_ha->phys[phy_id];

        u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS;
        u8 oob_mode   = dl->status_block[2];

        switch (oob_status) {
        case CURRENT_LOSS_OF_SIGNAL:
                /* directly attached device was removed */
                ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
                asd_turn_led(asd_ha, phy_id, 0);
                sas_phy_disconnected(&phy->sas_phy);
                sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
                break;
        case CURRENT_OOB_DONE:
                /* hot plugged device */
                asd_turn_led(asd_ha, phy_id, 1);
                get_lrate_mode(phy, oob_mode);
                ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
                            phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
                sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
                break;
        case CURRENT_SPINUP_HOLD:
                /* hot plug SATA, no COMWAKE sent */
                asd_turn_led(asd_ha, phy_id, 1);
                sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
                break;
        case CURRENT_GTO_TIMEOUT:
        case CURRENT_OOB_ERROR:
                ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id,
                            dl->status_block[1]);
                asd_turn_led(asd_ha, phy_id, 0);
                sas_phy_disconnected(&phy->sas_phy);
                sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
                break;
        }
}

/* If phys are enabled sparsely, this will do the right thing. */
static unsigned ord_phy(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
{
        u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
        int i, k = 0;

        for_each_phy(enabled_mask, enabled_mask, i) {
                if (&asd_ha->phys[i] == phy)
                        return k;
                k++;
        }
        return 0;
}

/**
 * asd_get_attached_sas_addr -- extract/generate attached SAS address
 * @phy: pointer to asd_phy
 * @sas_addr: pointer to buffer where the SAS address is to be written
 *
 * This function extracts the SAS address from an IDENTIFY frame
 * received.  If OOB is SATA, then a SAS address is generated from the
 * HA tables.
 *
 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
 * buffer.
 */
static void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
{
        if (phy->sas_phy.frame_rcvd[0] == 0x34
            && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
                struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
                /* FIS device-to-host */
                u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr);

                addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy);
                *(__be64 *)sas_addr = cpu_to_be64(addr);
        } else {
                struct sas_identify_frame *idframe =
                        (void *) phy->sas_phy.frame_rcvd;
                memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
        }
}

static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
{
        int i;
        struct asd_port *free_port = NULL;
        struct asd_port *port;
        struct asd_sas_phy *sas_phy = &phy->sas_phy;
        unsigned long flags;

        spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
        if (!phy->asd_port) {
                for (i = 0; i < ASD_MAX_PHYS; i++) {
                        port = &asd_ha->asd_ports[i];

                        /* Check for wide port */
                        if (port->num_phys > 0 &&
                            memcmp(port->sas_addr, sas_phy->sas_addr,
                                   SAS_ADDR_SIZE) == 0 &&
                            memcmp(port->attached_sas_addr,
                                   sas_phy->attached_sas_addr,
                                   SAS_ADDR_SIZE) == 0) {
                                break;
                        }

                        /* Find a free port */
                        if (port->num_phys == 0 && free_port == NULL) {
                                free_port = port;
                        }
                }

                /* Use a free port if this doesn't form a wide port */
                if (i >= ASD_MAX_PHYS) {
                        port = free_port;
                        BUG_ON(!port);
                        memcpy(port->sas_addr, sas_phy->sas_addr,
                               SAS_ADDR_SIZE);
                        memcpy(port->attached_sas_addr,
                               sas_phy->attached_sas_addr,
                               SAS_ADDR_SIZE);
                }
                port->num_phys++;
                port->phy_mask |= (1U << sas_phy->id);
                phy->asd_port = port;
        }
        ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
                    __func__, phy->asd_port->phy_mask, sas_phy->id);
        asd_update_port_links(asd_ha, phy);
        spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
}

static void asd_deform_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
{
        struct asd_port *port = phy->asd_port;
        struct asd_sas_phy *sas_phy = &phy->sas_phy;
        unsigned long flags;

        spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
        if (port) {
                port->num_phys--;
                port->phy_mask &= ~(1U << sas_phy->id);
                phy->asd_port = NULL;
        }
        spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
}

static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
                                    struct done_list_struct *dl,
                                    int edb_id, int phy_id)
{
        unsigned long flags;
        int edb_el = edb_id + ascb->edb_index;
        struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el];
        struct asd_phy *phy = &ascb->ha->phys[phy_id];
        struct sas_ha_struct *sas_ha = phy->sas_phy.ha;
        u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2];

        size = min(size, (u16) sizeof(phy->frame_rcvd));

        spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
        memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size);
        phy->sas_phy.frame_rcvd_size = size;
        asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
        spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
        asd_dump_frame_rcvd(phy, dl);
        asd_form_port(ascb->ha, phy);
        sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
}

static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
                                       struct done_list_struct *dl,
                                       int phy_id)
{
        struct asd_ha_struct *asd_ha = ascb->ha;
        struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
        struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
        struct asd_phy *phy = &asd_ha->phys[phy_id];
        u8 lr_error = dl->status_block[1];
        u8 retries_left = dl->status_block[2];

        switch (lr_error) {
        case 0:
                ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id);
                break;
        case 1:
                ASD_DPRINTK("phy%d: Loss of signal\n", phy_id);
                break;
        case 2:
                ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id);
                break;
        case 3:
                ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id);
                break;
        default:
                ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
                            phy_id, lr_error);
                break;
        }

        asd_turn_led(asd_ha, phy_id, 0);
        sas_phy_disconnected(sas_phy);
        asd_deform_port(asd_ha, phy);
        sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);

        if (retries_left == 0) {
                int num = 1;
                struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
                                                          GFP_ATOMIC);
                if (!cp) {
                        asd_printk("%s: out of memory\n", __func__);
                        goto out;
                }
                ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
                            phy_id);
                asd_build_control_phy(cp, phy_id, ENABLE_PHY);
                if (asd_post_ascb_list(ascb->ha, cp, 1) != 0)
                        asd_ascb_free(cp);
        }
out:
        ;
}

static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
                                       struct done_list_struct *dl,
                                       int phy_id)
{
        unsigned long flags;
        struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
        struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
        struct asd_ha_struct *asd_ha = ascb->ha;
        struct asd_phy *phy = &asd_ha->phys[phy_id];
        u8  reg  = dl->status_block[1];
        u32 cont = dl->status_block[2] << ((reg & 3)*8);

        reg &= ~3;
        switch (reg) {
        case LmPRMSTAT0BYTE0:
                switch (cont) {
                case LmBROADCH:
                case LmBROADRVCH0:
                case LmBROADRVCH1:
                case LmBROADSES:
                        ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
                                    phy_id, cont);
                        spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
                        sas_phy->sas_prim = ffs(cont);
                        spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
                        sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
                        break;

                case LmUNKNOWNP:
                        ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id);
                        break;

                default:
                        ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
                                    phy_id, reg, cont);
                        break;
                }
                break;
        case LmPRMSTAT1BYTE0:
                switch (cont) {
                case LmHARDRST:
                        ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
                                    phy_id);
                        /* The sequencer disables all phys on that port.
                         * We have to re-enable the phys ourselves. */
                        asd_deform_port(asd_ha, phy);
                        sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
                        break;

                default:
                        ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
                                    phy_id, reg, cont);
                        break;
                }
                break;
        default:
                ASD_DPRINTK("unknown primitive register:0x%x\n",
                            dl->status_block[1]);
                break;
        }
}

/**
 * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
 * @ascb: pointer to Empty SCB
 * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
 *
 * After an EDB has been invalidated, if all EDBs in this ESCB have been
 * invalidated, the ESCB is posted back to the sequencer.
 * Context is tasklet/IRQ.
 */
void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
{
        struct asd_seq_data *seq = &ascb->ha->seq;
        struct empty_scb *escb = &ascb->scb->escb;
        struct sg_el     *eb   = &escb->eb[edb_id];
        struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id];

        memset(edb->vaddr, 0, ASD_EDB_SIZE);
        eb->flags |= ELEMENT_NOT_VALID;
        escb->num_valid--;

        if (escb->num_valid == 0) {
                int i;
                /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
                            "dma_handle: 0x%08llx, next: 0x%08llx, "
                            "index:%d, opcode:0x%02x\n",
                            ascb->dma_scb.vaddr,
                            (u64)ascb->dma_scb.dma_handle,
                            le64_to_cpu(ascb->scb->header.next_scb),
                            le16_to_cpu(ascb->scb->header.index),
                            ascb->scb->header.opcode);
                */
                escb->num_valid = ASD_EDBS_PER_SCB;
                for (i = 0; i < ASD_EDBS_PER_SCB; i++)
                        escb->eb[i].flags = 0;
                if (!list_empty(&ascb->list))
                        list_del_init(&ascb->list);
                i = asd_post_escb_list(ascb->ha, ascb, 1);
                if (i)
                        asd_printk("couldn't post escb, err:%d\n", i);
        }
}

static void escb_tasklet_complete(struct asd_ascb *ascb,
                                  struct done_list_struct *dl)
{
        struct asd_ha_struct *asd_ha = ascb->ha;
        struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
        int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */
        u8  sb_opcode = dl->status_block[0];
        int phy_id = sb_opcode & DL_PHY_MASK;
        struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
        struct asd_phy *phy = &asd_ha->phys[phy_id];

        if (edb > 6 || edb < 0) {
                ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
                            edb, dl->opcode);
                ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
                            sb_opcode, phy_id);
                ASD_DPRINTK("escb: vaddr: 0x%p, "
                            "dma_handle: 0x%llx, next: 0x%llx, "
                            "index:%d, opcode:0x%02x\n",
                            ascb->dma_scb.vaddr,
                            (unsigned long long)ascb->dma_scb.dma_handle,
                            (unsigned long long)
                            le64_to_cpu(ascb->scb->header.next_scb),
                            le16_to_cpu(ascb->scb->header.index),
                            ascb->scb->header.opcode);
        }

        /* Catch these before we mask off the sb_opcode bits */
        switch (sb_opcode) {
        case REQ_TASK_ABORT: {
                struct asd_ascb *a, *b;
                u16 tc_abort;
                struct domain_device *failed_dev = NULL;

                ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
                            __func__, dl->status_block[3]);

                /*
                 * Find the task that caused the abort and abort it first.
                 * The sequencer won't put anything on the done list until
                 * that happens.
                 */
                tc_abort = *((u16*)(&dl->status_block[1]));
                tc_abort = le16_to_cpu(tc_abort);

                list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
                        struct sas_task *task = a->uldd_task;

                        if (a->tc_index != tc_abort)
                                continue;

                        if (task) {
                                failed_dev = task->dev;
                                sas_task_abort(task);
                        } else {
                                ASD_DPRINTK("R_T_A for non TASK scb 0x%x\n",
                                            a->scb->header.opcode);
                        }
                        break;
                }

                if (!failed_dev) {
                        ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
                                    __func__, tc_abort);
                        goto out;
                }

                /*
                 * Now abort everything else for that device (hba?) so
                 * that the EH will wake up and do something.
                 */
                list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
                        struct sas_task *task = a->uldd_task;

                        if (task &&
                            task->dev == failed_dev &&
                            a->tc_index != tc_abort)
                                sas_task_abort(task);
                }

                goto out;
        }
        case REQ_DEVICE_RESET: {
                struct asd_ascb *a;
                u16 conn_handle;
                unsigned long flags;
                struct sas_task *last_dev_task = NULL;

                conn_handle = *((u16*)(&dl->status_block[1]));
                conn_handle = le16_to_cpu(conn_handle);

                ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__,
                            dl->status_block[3]);

                /* Find the last pending task for the device... */
                list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
                        u16 x;
                        struct domain_device *dev;
                        struct sas_task *task = a->uldd_task;

                        if (!task)
                                continue;
                        dev = task->dev;

                        x = (unsigned long)dev->lldd_dev;
                        if (x == conn_handle)
                                last_dev_task = task;
                }

                if (!last_dev_task) {
                        ASD_DPRINTK("%s: Device reset for idle device %d?\n",
                                    __func__, conn_handle);
                        goto out;
                }

                /* ...and set the reset flag */
                spin_lock_irqsave(&last_dev_task->task_state_lock, flags);
                last_dev_task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
                spin_unlock_irqrestore(&last_dev_task->task_state_lock, flags);

                /* Kill all pending tasks for the device */
                list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
                        u16 x;
                        struct domain_device *dev;
                        struct sas_task *task = a->uldd_task;

                        if (!task)
                                continue;
                        dev = task->dev;

                        x = (unsigned long)dev->lldd_dev;
                        if (x == conn_handle)
                                sas_task_abort(task);
                }

                goto out;
        }
        case SIGNAL_NCQ_ERROR:
                ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__);
                goto out;
        case CLEAR_NCQ_ERROR:
                ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__);
                goto out;
        }

        sb_opcode &= ~DL_PHY_MASK;

        switch (sb_opcode) {
        case BYTES_DMAED:
                ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id);
                asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
                break;
        case PRIMITIVE_RECVD:
                ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__,
                            phy_id);
                asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
                break;
        case PHY_EVENT:
                ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id);
                asd_phy_event_tasklet(ascb, dl);
                break;
        case LINK_RESET_ERROR:
                ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__,
                            phy_id);
                asd_link_reset_err_tasklet(ascb, dl, phy_id);
                break;
        case TIMER_EVENT:
                ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
                            __func__, phy_id);
                asd_turn_led(asd_ha, phy_id, 0);
                /* the device is gone */
                sas_phy_disconnected(sas_phy);
                asd_deform_port(asd_ha, phy);
                sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
                break;
        default:
                ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
                            phy_id, sb_opcode);
                ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
                            edb, dl->opcode);
                ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
                            sb_opcode, phy_id);
                ASD_DPRINTK("escb: vaddr: 0x%p, "
                            "dma_handle: 0x%llx, next: 0x%llx, "
                            "index:%d, opcode:0x%02x\n",
                            ascb->dma_scb.vaddr,
                            (unsigned long long)ascb->dma_scb.dma_handle,
                            (unsigned long long)
                            le64_to_cpu(ascb->scb->header.next_scb),
                            le16_to_cpu(ascb->scb->header.index),
                            ascb->scb->header.opcode);

                break;
        }
out:
        asd_invalidate_edb(ascb, edb);
}

int asd_init_post_escbs(struct asd_ha_struct *asd_ha)
{
        struct asd_seq_data *seq = &asd_ha->seq;
        int i;

        for (i = 0; i < seq->num_escbs; i++)
                seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete;

        ASD_DPRINTK("posting %d escbs\n", i);
        return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs);
}

/* ---------- CONTROL PHY ---------- */

#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE   \
                            | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
                            | CURRENT_OOB_ERROR)

/**
 * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
 * @ascb: pointer to an ascb
 * @dl: pointer to the done list entry
 *
 * This function completes a CONTROL PHY scb and frees the ascb.
 * A note on LEDs:
 *  - an LED blinks if there is IO though it,
 *  - if a device is connected to the LED, it is lit,
 *  - if no device is connected to the LED, is is dimmed (off).
 */
static void control_phy_tasklet_complete(struct asd_ascb *ascb,
                                         struct done_list_struct *dl)
{
        struct asd_ha_struct *asd_ha = ascb->ha;
        struct scb *scb = ascb->scb;
        struct control_phy *control_phy = &scb->control_phy;
        u8 phy_id = control_phy->phy_id;
        struct asd_phy *phy = &ascb->ha->phys[phy_id];

        u8 status     = dl->status_block[0];
        u8 oob_status = dl->status_block[1];
        u8 oob_mode   = dl->status_block[2];
        /* u8 oob_signals= dl->status_block[3]; */

        if (status != 0) {
                ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
                            __func__, phy_id, status);
                goto out;
        }

        switch (control_phy->sub_func) {
        case DISABLE_PHY:
                asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
                asd_turn_led(asd_ha, phy_id, 0);
                asd_control_led(asd_ha, phy_id, 0);
                ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id);
                break;

        case ENABLE_PHY:
                asd_control_led(asd_ha, phy_id, 1);
                if (oob_status & CURRENT_OOB_DONE) {
                        asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
                        get_lrate_mode(phy, oob_mode);
                        asd_turn_led(asd_ha, phy_id, 1);
                        ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
                                    __func__, phy_id,phy->sas_phy.linkrate,
                                    phy->sas_phy.iproto);
                } else if (oob_status & CURRENT_SPINUP_HOLD) {
                        asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
                        asd_turn_led(asd_ha, phy_id, 1);
                        ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__,
                                    phy_id);
                } else if (oob_status & CURRENT_ERR_MASK) {
                        asd_turn_led(asd_ha, phy_id, 0);
                        ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
                                    __func__, phy_id, oob_status);
                } else if (oob_status & (CURRENT_HOT_PLUG_CNCT
                                         | CURRENT_DEVICE_PRESENT))  {
                        asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
                        asd_turn_led(asd_ha, phy_id, 1);
                        ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
                                    __func__, phy_id);
                } else {
                        asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
                        asd_turn_led(asd_ha, phy_id, 0);
                        ASD_DPRINTK("%s: phy%d: no device present: "
                                    "oob_status:0x%x\n",
                                    __func__, phy_id, oob_status);
                }
                break;
        case RELEASE_SPINUP_HOLD:
        case PHY_NO_OP:
        case EXECUTE_HARD_RESET:
                ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__,
                            phy_id, control_phy->sub_func);
                /* XXX finish */
                break;
        default:
                ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__,
                            phy_id, control_phy->sub_func);
                break;
        }
out:
        asd_ascb_free(ascb);
}

static void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
{
        /* disable all speeds, then enable defaults */
        *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
                | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS;

        switch (pd->max_sas_lrate) {
        case SAS_LINK_RATE_6_0_GBPS:
                *speed_mask &= ~SAS_SPEED_60_DIS;
                fallthrough;
        default:
        case SAS_LINK_RATE_3_0_GBPS:
                *speed_mask &= ~SAS_SPEED_30_DIS;
                fallthrough;
        case SAS_LINK_RATE_1_5_GBPS:
                *speed_mask &= ~SAS_SPEED_15_DIS;
        }

        switch (pd->min_sas_lrate) {
        case SAS_LINK_RATE_6_0_GBPS:
                *speed_mask |= SAS_SPEED_30_DIS;
                fallthrough;
        case SAS_LINK_RATE_3_0_GBPS:
                *speed_mask |= SAS_SPEED_15_DIS;
        default:
        case SAS_LINK_RATE_1_5_GBPS:
                /* nothing to do */
                ;
        }

        switch (pd->max_sata_lrate) {
        case SAS_LINK_RATE_3_0_GBPS:
                *speed_mask &= ~SATA_SPEED_30_DIS;
                fallthrough;
        default:
        case SAS_LINK_RATE_1_5_GBPS:
                *speed_mask &= ~SATA_SPEED_15_DIS;
        }

        switch (pd->min_sata_lrate) {
        case SAS_LINK_RATE_3_0_GBPS:
                *speed_mask |= SATA_SPEED_15_DIS;
        default:
        case SAS_LINK_RATE_1_5_GBPS:
                /* nothing to do */
                ;
        }
}

/**
 * asd_build_control_phy -- build a CONTROL PHY SCB
 * @ascb: pointer to an ascb
 * @phy_id: phy id to control, integer
 * @subfunc: subfunction, what to actually to do the phy
 *
 * This function builds a CONTROL PHY scb.  No allocation of any kind
 * is performed. @ascb is allocated with the list function.
 * The caller can override the ascb->tasklet_complete to point
 * to its own callback function.  It must call asd_ascb_free()
 * at its tasklet complete function.
 * See the default implementation.
 */
void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc)
{
        struct asd_phy *phy = &ascb->ha->phys[phy_id];
        struct scb *scb = ascb->scb;
        struct control_phy *control_phy = &scb->control_phy;

        scb->header.opcode = CONTROL_PHY;
        control_phy->phy_id = (u8) phy_id;
        control_phy->sub_func = subfunc;

        switch (subfunc) {
        case EXECUTE_HARD_RESET:  /* 0x81 */
        case ENABLE_PHY:          /* 0x01 */
                /* decide hot plug delay */
                control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT;

                /* decide speed mask */
                set_speed_mask(&control_phy->speed_mask, phy->phy_desc);

                /* initiator port settings are in the hi nibble */
                if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
                        control_phy->port_type = SAS_PROTOCOL_ALL << 4;
                else if (phy->sas_phy.role == PHY_ROLE_TARGET)
                        control_phy->port_type = SAS_PROTOCOL_ALL;
                else
                        control_phy->port_type =
                                (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL;

                /* link reset retries, this should be nominal */
                control_phy->link_reset_retries = 10;
                fallthrough;

        case RELEASE_SPINUP_HOLD: /* 0x02 */
                /* decide the func_mask */
                control_phy->func_mask = FUNCTION_MASK_DEFAULT;
                if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD)
                        control_phy->func_mask &= ~SPINUP_HOLD_DIS;
                else
                        control_phy->func_mask |= SPINUP_HOLD_DIS;
        }

        control_phy->conn_handle = cpu_to_le16(0xFFFF);

        ascb->tasklet_complete = control_phy_tasklet_complete;
}

/* ---------- INITIATE LINK ADM TASK ---------- */

#if 0

static void link_adm_tasklet_complete(struct asd_ascb *ascb,
                                      struct done_list_struct *dl)
{
        u8 opcode = dl->opcode;
        struct initiate_link_adm *link_adm = &ascb->scb->link_adm;
        u8 phy_id = link_adm->phy_id;

        if (opcode != TC_NO_ERROR) {
                asd_printk("phy%d: link adm task 0x%x completed with error "
                           "0x%x\n", phy_id, link_adm->sub_func, opcode);
        }
        ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
                    phy_id, link_adm->sub_func, opcode);

        asd_ascb_free(ascb);
}

void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
                                      u8 subfunc)
{
        struct scb *scb = ascb->scb;
        struct initiate_link_adm *link_adm = &scb->link_adm;

        scb->header.opcode = INITIATE_LINK_ADM_TASK;

        link_adm->phy_id = phy_id;
        link_adm->sub_func = subfunc;
        link_adm->conn_handle = cpu_to_le16(0xFFFF);

        ascb->tasklet_complete = link_adm_tasklet_complete;
}

#endif  /*  0  */

/* ---------- SCB timer ---------- */

/**
 * asd_ascb_timedout -- called when a pending SCB's timer has expired
 * @t: Timer context used to fetch the SCB
 *
 * This is the default timeout function which does the most necessary.
 * Upper layers can implement their own timeout function, say to free
 * resources they have with this SCB, and then call this one at the
 * end of their timeout function.  To do this, one should initialize
 * the ascb->timer.{function, expires} prior to calling the post
 * function. The timer is started by the post function.
 */
void asd_ascb_timedout(struct timer_list *t)
{
        struct asd_ascb *ascb = from_timer(ascb, t, timer);
        struct asd_seq_data *seq = &ascb->ha->seq;
        unsigned long flags;

        ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode);

        spin_lock_irqsave(&seq->pend_q_lock, flags);
        seq->pending--;
        list_del_init(&ascb->list);
        spin_unlock_irqrestore(&seq->pend_q_lock, flags);

        asd_ascb_free(ascb);
}

/* ---------- CONTROL PHY ---------- */

/* Given the spec value, return a driver value. */
static const int phy_func_table[] = {
        [PHY_FUNC_NOP]        = PHY_NO_OP,
        [PHY_FUNC_LINK_RESET] = ENABLE_PHY,
        [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET,
        [PHY_FUNC_DISABLE]    = DISABLE_PHY,
        [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
};

int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg)
{
        struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
        struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc;
        struct asd_ascb *ascb;
        struct sas_phy_linkrates *rates;
        int res = 1;

        switch (func) {
        case PHY_FUNC_CLEAR_ERROR_LOG:
        case PHY_FUNC_GET_EVENTS:
                return -ENOSYS;
        case PHY_FUNC_SET_LINK_RATE:
                rates = arg;
                if (rates->minimum_linkrate) {
                        pd->min_sas_lrate = rates->minimum_linkrate;
                        pd->min_sata_lrate = rates->minimum_linkrate;
                }
                if (rates->maximum_linkrate) {
                        pd->max_sas_lrate = rates->maximum_linkrate;
                        pd->max_sata_lrate = rates->maximum_linkrate;
                }
                func = PHY_FUNC_LINK_RESET;
                break;
        default:
                break;
        }

        ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
        if (!ascb)
                return -ENOMEM;

        asd_build_control_phy(ascb, phy->id, phy_func_table[func]);
        res = asd_post_ascb_list(asd_ha, ascb , 1);
        if (res)
                asd_ascb_free(ascb);

        return res;
}