1
2
3
4
5
6
7
8
9
10#include <linux/kernel.h>
11#include <linux/errno.h>
12#include <linux/slab.h>
13#include <linux/tty.h>
14#include <linux/tty_driver.h>
15#include <linux/tty_flip.h>
16#include <linux/serial.h>
17#include <linux/module.h>
18#include <linux/moduleparam.h>
19#include <linux/mutex.h>
20#include <linux/uaccess.h>
21#include <linux/usb.h>
22#include <linux/usb/serial.h>
23#include <linux/serial_reg.h>
24
25#define F81232_ID \
26 { USB_DEVICE(0x1934, 0x0706) }
27
28#define F81534A_SERIES_ID \
29 { USB_DEVICE(0x2c42, 0x1602) }, \
30 { USB_DEVICE(0x2c42, 0x1604) }, \
31 { USB_DEVICE(0x2c42, 0x1605) }, \
32 { USB_DEVICE(0x2c42, 0x1606) }, \
33 { USB_DEVICE(0x2c42, 0x1608) }, \
34 { USB_DEVICE(0x2c42, 0x1632) }, \
35 { USB_DEVICE(0x2c42, 0x1634) }, \
36 { USB_DEVICE(0x2c42, 0x1635) }, \
37 { USB_DEVICE(0x2c42, 0x1636) }
38
39#define F81534A_CTRL_ID \
40 { USB_DEVICE(0x2c42, 0x16f8) }
41
42static const struct usb_device_id f81232_id_table[] = {
43 F81232_ID,
44 { }
45};
46
47static const struct usb_device_id f81534a_id_table[] = {
48 F81534A_SERIES_ID,
49 { }
50};
51
52static const struct usb_device_id f81534a_ctrl_id_table[] = {
53 F81534A_CTRL_ID,
54 { }
55};
56
57static const struct usb_device_id combined_id_table[] = {
58 F81232_ID,
59 F81534A_SERIES_ID,
60 F81534A_CTRL_ID,
61 { }
62};
63MODULE_DEVICE_TABLE(usb, combined_id_table);
64
65
66#define F81232_MAX_BAUDRATE 1500000
67#define F81232_DEF_BAUDRATE 9600
68
69
70#define F81232_REGISTER_REQUEST 0xa0
71#define F81232_GET_REGISTER 0xc0
72#define F81232_SET_REGISTER 0x40
73#define F81534A_ACCESS_REG_RETRY 2
74
75#define SERIAL_BASE_ADDRESS 0x0120
76#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
77#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
78#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
79#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
80#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
81#define LINE_STATUS_REGISTER (0x05 + SERIAL_BASE_ADDRESS)
82#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
83
84
85
86
87
88
89
90
91
92
93#define F81232_CLK_REGISTER 0x106
94#define F81232_CLK_1_846_MHZ 0
95#define F81232_CLK_18_46_MHZ BIT(0)
96#define F81232_CLK_24_MHZ BIT(1)
97#define F81232_CLK_14_77_MHZ (BIT(1) | BIT(0))
98#define F81232_CLK_MASK GENMASK(1, 0)
99
100#define F81534A_MODE_REG 0x107
101#define F81534A_TRIGGER_MASK GENMASK(3, 2)
102#define F81534A_TRIGGER_MULTIPLE_4X BIT(3)
103#define F81534A_FIFO_128BYTE (BIT(1) | BIT(0))
104
105
106#define F81534A_GPIO_REG 0x10e
107#define F81534A_GPIO_MODE2_DIR BIT(6)
108#define F81534A_GPIO_MODE1_DIR BIT(5)
109#define F81534A_GPIO_MODE0_DIR BIT(4)
110#define F81534A_GPIO_MODE2_OUTPUT BIT(2)
111#define F81534A_GPIO_MODE1_OUTPUT BIT(1)
112#define F81534A_GPIO_MODE0_OUTPUT BIT(0)
113
114#define F81534A_CTRL_CMD_ENABLE_PORT 0x116
115
116struct f81232_private {
117 struct mutex lock;
118 u8 modem_control;
119 u8 modem_status;
120 u8 shadow_lcr;
121 speed_t baud_base;
122 struct work_struct lsr_work;
123 struct work_struct interrupt_work;
124 struct usb_serial_port *port;
125};
126
127static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
128static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ,
129 F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ };
130
131static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
132{
133 if (!baudrate)
134 return 0;
135
136 return DIV_ROUND_CLOSEST(clockrate, baudrate);
137}
138
139static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
140{
141 int status;
142 u8 *tmp;
143 struct usb_device *dev = port->serial->dev;
144
145 tmp = kmalloc(sizeof(*val), GFP_KERNEL);
146 if (!tmp)
147 return -ENOMEM;
148
149 status = usb_control_msg(dev,
150 usb_rcvctrlpipe(dev, 0),
151 F81232_REGISTER_REQUEST,
152 F81232_GET_REGISTER,
153 reg,
154 0,
155 tmp,
156 sizeof(*val),
157 USB_CTRL_GET_TIMEOUT);
158 if (status != sizeof(*val)) {
159 dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
160
161 if (status < 0)
162 status = usb_translate_errors(status);
163 else
164 status = -EIO;
165 } else {
166 status = 0;
167 *val = *tmp;
168 }
169
170 kfree(tmp);
171 return status;
172}
173
174static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
175{
176 int status;
177 u8 *tmp;
178 struct usb_device *dev = port->serial->dev;
179
180 tmp = kmalloc(sizeof(val), GFP_KERNEL);
181 if (!tmp)
182 return -ENOMEM;
183
184 *tmp = val;
185
186 status = usb_control_msg(dev,
187 usb_sndctrlpipe(dev, 0),
188 F81232_REGISTER_REQUEST,
189 F81232_SET_REGISTER,
190 reg,
191 0,
192 tmp,
193 sizeof(val),
194 USB_CTRL_SET_TIMEOUT);
195 if (status != sizeof(val)) {
196 dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
197
198 if (status < 0)
199 status = usb_translate_errors(status);
200 else
201 status = -EIO;
202 } else {
203 status = 0;
204 }
205
206 kfree(tmp);
207 return status;
208}
209
210static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg,
211 u8 mask, u8 val)
212{
213 int status;
214 u8 tmp;
215
216 status = f81232_get_register(port, reg, &tmp);
217 if (status)
218 return status;
219
220 tmp = (tmp & ~mask) | (val & mask);
221
222 return f81232_set_register(port, reg, tmp);
223}
224
225static void f81232_read_msr(struct usb_serial_port *port)
226{
227 int status;
228 u8 current_msr;
229 struct tty_struct *tty;
230 struct f81232_private *priv = usb_get_serial_port_data(port);
231
232 mutex_lock(&priv->lock);
233 status = f81232_get_register(port, MODEM_STATUS_REGISTER,
234 ¤t_msr);
235 if (status) {
236 dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
237 mutex_unlock(&priv->lock);
238 return;
239 }
240
241 if (!(current_msr & UART_MSR_ANY_DELTA)) {
242 mutex_unlock(&priv->lock);
243 return;
244 }
245
246 priv->modem_status = current_msr;
247
248 if (current_msr & UART_MSR_DCTS)
249 port->icount.cts++;
250 if (current_msr & UART_MSR_DDSR)
251 port->icount.dsr++;
252 if (current_msr & UART_MSR_TERI)
253 port->icount.rng++;
254 if (current_msr & UART_MSR_DDCD) {
255 port->icount.dcd++;
256 tty = tty_port_tty_get(&port->port);
257 if (tty) {
258 usb_serial_handle_dcd_change(port, tty,
259 current_msr & UART_MSR_DCD);
260
261 tty_kref_put(tty);
262 }
263 }
264
265 wake_up_interruptible(&port->port.delta_msr_wait);
266 mutex_unlock(&priv->lock);
267}
268
269static int f81232_set_mctrl(struct usb_serial_port *port,
270 unsigned int set, unsigned int clear)
271{
272 u8 val;
273 int status;
274 struct f81232_private *priv = usb_get_serial_port_data(port);
275
276 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
277 return 0;
278
279
280 clear &= ~set;
281
282
283 mutex_lock(&priv->lock);
284 val = UART_MCR_OUT2 | priv->modem_control;
285
286 if (clear & TIOCM_DTR)
287 val &= ~UART_MCR_DTR;
288
289 if (clear & TIOCM_RTS)
290 val &= ~UART_MCR_RTS;
291
292 if (set & TIOCM_DTR)
293 val |= UART_MCR_DTR;
294
295 if (set & TIOCM_RTS)
296 val |= UART_MCR_RTS;
297
298 dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
299 val, priv->modem_control);
300
301 status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
302 if (status) {
303 dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
304 mutex_unlock(&priv->lock);
305 return status;
306 }
307
308 priv->modem_control = val;
309 mutex_unlock(&priv->lock);
310
311 return 0;
312}
313
314static void f81232_update_line_status(struct usb_serial_port *port,
315 unsigned char *data,
316 size_t actual_length)
317{
318 struct f81232_private *priv = usb_get_serial_port_data(port);
319
320 if (!actual_length)
321 return;
322
323 switch (data[0] & 0x07) {
324 case 0x00:
325 dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
326 schedule_work(&priv->interrupt_work);
327 break;
328 case 0x02:
329 break;
330 case 0x04:
331 break;
332 case 0x06:
333
334 dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
335 break;
336 }
337}
338
339static void f81232_read_int_callback(struct urb *urb)
340{
341 struct usb_serial_port *port = urb->context;
342 unsigned char *data = urb->transfer_buffer;
343 unsigned int actual_length = urb->actual_length;
344 int status = urb->status;
345 int retval;
346
347 switch (status) {
348 case 0:
349
350 break;
351 case -ECONNRESET:
352 case -ENOENT:
353 case -ESHUTDOWN:
354
355 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
356 __func__, status);
357 return;
358 default:
359 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
360 __func__, status);
361 goto exit;
362 }
363
364 usb_serial_debug_data(&port->dev, __func__,
365 urb->actual_length, urb->transfer_buffer);
366
367 f81232_update_line_status(port, data, actual_length);
368
369exit:
370 retval = usb_submit_urb(urb, GFP_ATOMIC);
371 if (retval)
372 dev_err(&urb->dev->dev,
373 "%s - usb_submit_urb failed with result %d\n",
374 __func__, retval);
375}
376
377static char f81232_handle_lsr(struct usb_serial_port *port, u8 lsr)
378{
379 struct f81232_private *priv = usb_get_serial_port_data(port);
380 char tty_flag = TTY_NORMAL;
381
382 if (!(lsr & UART_LSR_BRK_ERROR_BITS))
383 return tty_flag;
384
385 if (lsr & UART_LSR_BI) {
386 tty_flag = TTY_BREAK;
387 port->icount.brk++;
388 usb_serial_handle_break(port);
389 } else if (lsr & UART_LSR_PE) {
390 tty_flag = TTY_PARITY;
391 port->icount.parity++;
392 } else if (lsr & UART_LSR_FE) {
393 tty_flag = TTY_FRAME;
394 port->icount.frame++;
395 }
396
397 if (lsr & UART_LSR_OE) {
398 port->icount.overrun++;
399 schedule_work(&priv->lsr_work);
400 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
401 }
402
403 return tty_flag;
404}
405
406static void f81232_process_read_urb(struct urb *urb)
407{
408 struct usb_serial_port *port = urb->context;
409 unsigned char *data = urb->transfer_buffer;
410 char tty_flag;
411 unsigned int i;
412 u8 lsr;
413
414
415
416
417
418 if ((urb->actual_length < 2) || (urb->actual_length % 2))
419 return;
420
421
422
423 for (i = 0; i < urb->actual_length; i += 2) {
424 lsr = data[i];
425 tty_flag = f81232_handle_lsr(port, lsr);
426
427 if (port->sysrq) {
428 if (usb_serial_handle_sysrq_char(port, data[i + 1]))
429 continue;
430 }
431
432 tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
433 }
434
435 tty_flip_buffer_push(&port->port);
436}
437
438static void f81534a_process_read_urb(struct urb *urb)
439{
440 struct usb_serial_port *port = urb->context;
441 unsigned char *data = urb->transfer_buffer;
442 char tty_flag;
443 unsigned int i;
444 u8 lsr;
445 u8 len;
446
447 if (urb->actual_length < 3) {
448 dev_err(&port->dev, "short message received: %d\n",
449 urb->actual_length);
450 return;
451 }
452
453 len = data[0];
454 if (len != urb->actual_length) {
455 dev_err(&port->dev, "malformed message received: %d (%d)\n",
456 urb->actual_length, len);
457 return;
458 }
459
460
461 lsr = data[len - 1];
462 tty_flag = f81232_handle_lsr(port, lsr);
463
464 if (port->sysrq) {
465 for (i = 1; i < len - 1; ++i) {
466 if (!usb_serial_handle_sysrq_char(port, data[i])) {
467 tty_insert_flip_char(&port->port, data[i],
468 tty_flag);
469 }
470 }
471 } else {
472 tty_insert_flip_string_fixed_flag(&port->port, &data[1],
473 tty_flag, len - 2);
474 }
475
476 tty_flip_buffer_push(&port->port);
477}
478
479static void f81232_break_ctl(struct tty_struct *tty, int break_state)
480{
481 struct usb_serial_port *port = tty->driver_data;
482 struct f81232_private *priv = usb_get_serial_port_data(port);
483 int status;
484
485 mutex_lock(&priv->lock);
486
487 if (break_state)
488 priv->shadow_lcr |= UART_LCR_SBC;
489 else
490 priv->shadow_lcr &= ~UART_LCR_SBC;
491
492 status = f81232_set_register(port, LINE_CONTROL_REGISTER,
493 priv->shadow_lcr);
494 if (status)
495 dev_err(&port->dev, "set break failed: %d\n", status);
496
497 mutex_unlock(&priv->lock);
498}
499
500static int f81232_find_clk(speed_t baudrate)
501{
502 int idx;
503
504 for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
505 if (baudrate <= baudrate_table[idx] &&
506 baudrate_table[idx] % baudrate == 0)
507 return idx;
508 }
509
510 return -EINVAL;
511}
512
513static void f81232_set_baudrate(struct tty_struct *tty,
514 struct usb_serial_port *port, speed_t baudrate,
515 speed_t old_baudrate)
516{
517 struct f81232_private *priv = usb_get_serial_port_data(port);
518 u8 lcr;
519 int divisor;
520 int status = 0;
521 int i;
522 int idx;
523 speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };
524
525 for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
526 idx = f81232_find_clk(baud_list[i]);
527 if (idx >= 0) {
528 baudrate = baud_list[i];
529 tty_encode_baud_rate(tty, baudrate, baudrate);
530 break;
531 }
532 }
533
534 if (idx < 0)
535 return;
536
537 priv->baud_base = baudrate_table[idx];
538 divisor = calc_baud_divisor(baudrate, priv->baud_base);
539
540 status = f81232_set_mask_register(port, F81232_CLK_REGISTER,
541 F81232_CLK_MASK, clock_table[idx]);
542 if (status) {
543 dev_err(&port->dev, "%s failed to set CLK_REG: %d\n",
544 __func__, status);
545 return;
546 }
547
548 status = f81232_get_register(port, LINE_CONTROL_REGISTER,
549 &lcr);
550 if (status) {
551 dev_err(&port->dev, "%s failed to get LCR: %d\n",
552 __func__, status);
553 return;
554 }
555
556 status = f81232_set_register(port, LINE_CONTROL_REGISTER,
557 lcr | UART_LCR_DLAB);
558 if (status) {
559 dev_err(&port->dev, "%s failed to set DLAB: %d\n",
560 __func__, status);
561 return;
562 }
563
564 status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
565 divisor & 0x00ff);
566 if (status) {
567 dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
568 __func__, status);
569 goto reapply_lcr;
570 }
571
572 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
573 (divisor & 0xff00) >> 8);
574 if (status) {
575 dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
576 __func__, status);
577 }
578
579reapply_lcr:
580 status = f81232_set_register(port, LINE_CONTROL_REGISTER,
581 lcr & ~UART_LCR_DLAB);
582 if (status) {
583 dev_err(&port->dev, "%s failed to set DLAB: %d\n",
584 __func__, status);
585 }
586}
587
588static int f81232_port_enable(struct usb_serial_port *port)
589{
590 u8 val;
591 int status;
592
593
594 val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
595 UART_FCR_CLEAR_XMIT;
596
597 status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
598 if (status) {
599 dev_err(&port->dev, "%s failed to set FCR: %d\n",
600 __func__, status);
601 return status;
602 }
603
604
605 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
606 UART_IER_MSI);
607 if (status) {
608 dev_err(&port->dev, "%s failed to set IER: %d\n",
609 __func__, status);
610 return status;
611 }
612
613 return 0;
614}
615
616static int f81232_port_disable(struct usb_serial_port *port)
617{
618 int status;
619
620 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
621 if (status) {
622 dev_err(&port->dev, "%s failed to set IER: %d\n",
623 __func__, status);
624 return status;
625 }
626
627 return 0;
628}
629
630static void f81232_set_termios(struct tty_struct *tty,
631 struct usb_serial_port *port, struct ktermios *old_termios)
632{
633 struct f81232_private *priv = usb_get_serial_port_data(port);
634 u8 new_lcr = 0;
635 int status = 0;
636 speed_t baudrate;
637 speed_t old_baud;
638
639
640 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
641 return;
642
643 if (C_BAUD(tty) == B0)
644 f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
645 else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
646 f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
647
648 baudrate = tty_get_baud_rate(tty);
649 if (baudrate > 0) {
650 if (old_termios)
651 old_baud = tty_termios_baud_rate(old_termios);
652 else
653 old_baud = F81232_DEF_BAUDRATE;
654
655 f81232_set_baudrate(tty, port, baudrate, old_baud);
656 }
657
658 if (C_PARENB(tty)) {
659 new_lcr |= UART_LCR_PARITY;
660
661 if (!C_PARODD(tty))
662 new_lcr |= UART_LCR_EPAR;
663
664 if (C_CMSPAR(tty))
665 new_lcr |= UART_LCR_SPAR;
666 }
667
668 if (C_CSTOPB(tty))
669 new_lcr |= UART_LCR_STOP;
670
671 switch (C_CSIZE(tty)) {
672 case CS5:
673 new_lcr |= UART_LCR_WLEN5;
674 break;
675 case CS6:
676 new_lcr |= UART_LCR_WLEN6;
677 break;
678 case CS7:
679 new_lcr |= UART_LCR_WLEN7;
680 break;
681 default:
682 case CS8:
683 new_lcr |= UART_LCR_WLEN8;
684 break;
685 }
686
687 mutex_lock(&priv->lock);
688
689 new_lcr |= (priv->shadow_lcr & UART_LCR_SBC);
690 status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
691 if (status) {
692 dev_err(&port->dev, "%s failed to set LCR: %d\n",
693 __func__, status);
694 }
695
696 priv->shadow_lcr = new_lcr;
697
698 mutex_unlock(&priv->lock);
699}
700
701static int f81232_tiocmget(struct tty_struct *tty)
702{
703 int r;
704 struct usb_serial_port *port = tty->driver_data;
705 struct f81232_private *port_priv = usb_get_serial_port_data(port);
706 u8 mcr, msr;
707
708
709 f81232_read_msr(port);
710
711 mutex_lock(&port_priv->lock);
712 mcr = port_priv->modem_control;
713 msr = port_priv->modem_status;
714 mutex_unlock(&port_priv->lock);
715
716 r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
717 (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
718 (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
719 (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
720 (msr & UART_MSR_RI ? TIOCM_RI : 0) |
721 (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
722
723 return r;
724}
725
726static int f81232_tiocmset(struct tty_struct *tty,
727 unsigned int set, unsigned int clear)
728{
729 struct usb_serial_port *port = tty->driver_data;
730
731 return f81232_set_mctrl(port, set, clear);
732}
733
734static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
735{
736 int result;
737
738 result = f81232_port_enable(port);
739 if (result)
740 return result;
741
742
743 if (tty)
744 f81232_set_termios(tty, port, NULL);
745
746 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
747 if (result) {
748 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
749 " error %d\n", __func__, result);
750 return result;
751 }
752
753 result = usb_serial_generic_open(tty, port);
754 if (result) {
755 usb_kill_urb(port->interrupt_in_urb);
756 return result;
757 }
758
759 return 0;
760}
761
762static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port)
763{
764 int status;
765 u8 mask;
766 u8 val;
767
768 val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE;
769 mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE;
770
771 status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val);
772 if (status) {
773 dev_err(&port->dev, "failed to set MODE_REG: %d\n", status);
774 return status;
775 }
776
777 return f81232_open(tty, port);
778}
779
780static void f81232_close(struct usb_serial_port *port)
781{
782 struct f81232_private *port_priv = usb_get_serial_port_data(port);
783
784 f81232_port_disable(port);
785 usb_serial_generic_close(port);
786 usb_kill_urb(port->interrupt_in_urb);
787 flush_work(&port_priv->interrupt_work);
788 flush_work(&port_priv->lsr_work);
789}
790
791static void f81232_dtr_rts(struct usb_serial_port *port, int on)
792{
793 if (on)
794 f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
795 else
796 f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
797}
798
799static bool f81232_tx_empty(struct usb_serial_port *port)
800{
801 int status;
802 u8 tmp;
803
804 status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
805 if (!status) {
806 if ((tmp & UART_LSR_TEMT) != UART_LSR_TEMT)
807 return false;
808 }
809
810 return true;
811}
812
813static int f81232_carrier_raised(struct usb_serial_port *port)
814{
815 u8 msr;
816 struct f81232_private *priv = usb_get_serial_port_data(port);
817
818 mutex_lock(&priv->lock);
819 msr = priv->modem_status;
820 mutex_unlock(&priv->lock);
821
822 if (msr & UART_MSR_DCD)
823 return 1;
824 return 0;
825}
826
827static int f81232_get_serial_info(struct tty_struct *tty,
828 struct serial_struct *ss)
829{
830 struct usb_serial_port *port = tty->driver_data;
831 struct f81232_private *priv = usb_get_serial_port_data(port);
832
833 ss->type = PORT_16550A;
834 ss->line = port->minor;
835 ss->port = port->port_number;
836 ss->baud_base = priv->baud_base;
837 return 0;
838}
839
840static void f81232_interrupt_work(struct work_struct *work)
841{
842 struct f81232_private *priv =
843 container_of(work, struct f81232_private, interrupt_work);
844
845 f81232_read_msr(priv->port);
846}
847
848static void f81232_lsr_worker(struct work_struct *work)
849{
850 struct f81232_private *priv;
851 struct usb_serial_port *port;
852 int status;
853 u8 tmp;
854
855 priv = container_of(work, struct f81232_private, lsr_work);
856 port = priv->port;
857
858 status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
859 if (status)
860 dev_warn(&port->dev, "read LSR failed: %d\n", status);
861}
862
863static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
864 u16 size, void *val)
865{
866 struct usb_device *dev = interface_to_usbdev(intf);
867 int retry = F81534A_ACCESS_REG_RETRY;
868 int status;
869 u8 *tmp;
870
871 tmp = kmemdup(val, size, GFP_KERNEL);
872 if (!tmp)
873 return -ENOMEM;
874
875 while (retry--) {
876 status = usb_control_msg(dev,
877 usb_sndctrlpipe(dev, 0),
878 F81232_REGISTER_REQUEST,
879 F81232_SET_REGISTER,
880 reg,
881 0,
882 tmp,
883 size,
884 USB_CTRL_SET_TIMEOUT);
885 if (status < 0) {
886 status = usb_translate_errors(status);
887 if (status == -EIO)
888 continue;
889 } else if (status != size) {
890
891 status = -EIO;
892 continue;
893 } else {
894 status = 0;
895 }
896
897 break;
898 }
899
900 if (status) {
901 dev_err(&intf->dev, "failed to set register 0x%x: %d\n",
902 reg, status);
903 }
904
905 kfree(tmp);
906 return status;
907}
908
909static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
910{
911 unsigned char enable[2] = {0};
912 int status;
913
914
915
916
917
918
919
920
921 if (en) {
922 enable[0] = 0xff;
923 enable[1] = 0x8f;
924 }
925
926 status = f81534a_ctrl_set_register(intf, F81534A_CTRL_CMD_ENABLE_PORT,
927 sizeof(enable), enable);
928 if (status)
929 dev_err(&intf->dev, "failed to enable ports: %d\n", status);
930
931 return status;
932}
933
934static int f81534a_ctrl_probe(struct usb_interface *intf,
935 const struct usb_device_id *id)
936{
937 return f81534a_ctrl_enable_all_ports(intf, true);
938}
939
940static void f81534a_ctrl_disconnect(struct usb_interface *intf)
941{
942 f81534a_ctrl_enable_all_ports(intf, false);
943}
944
945static int f81534a_ctrl_resume(struct usb_interface *intf)
946{
947 return f81534a_ctrl_enable_all_ports(intf, true);
948}
949
950static int f81232_port_probe(struct usb_serial_port *port)
951{
952 struct f81232_private *priv;
953
954 priv = devm_kzalloc(&port->dev, sizeof(*priv), GFP_KERNEL);
955 if (!priv)
956 return -ENOMEM;
957
958 mutex_init(&priv->lock);
959 INIT_WORK(&priv->interrupt_work, f81232_interrupt_work);
960 INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
961
962 usb_set_serial_port_data(port, priv);
963
964 port->port.drain_delay = 256;
965 priv->port = port;
966
967 return 0;
968}
969
970static int f81534a_port_probe(struct usb_serial_port *port)
971{
972 int status;
973
974
975 status = f81232_set_register(port, F81534A_GPIO_REG,
976 F81534A_GPIO_MODE2_DIR);
977 if (status)
978 return status;
979
980 return f81232_port_probe(port);
981}
982
983static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
984{
985 struct usb_serial_port *port = serial->port[0];
986 struct f81232_private *port_priv = usb_get_serial_port_data(port);
987 int i;
988
989 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
990 usb_kill_urb(port->read_urbs[i]);
991
992 usb_kill_urb(port->interrupt_in_urb);
993
994 if (port_priv) {
995 flush_work(&port_priv->interrupt_work);
996 flush_work(&port_priv->lsr_work);
997 }
998
999 return 0;
1000}
1001
1002static int f81232_resume(struct usb_serial *serial)
1003{
1004 struct usb_serial_port *port = serial->port[0];
1005 int result;
1006
1007 if (tty_port_initialized(&port->port)) {
1008 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
1009 if (result) {
1010 dev_err(&port->dev, "submit interrupt urb failed: %d\n",
1011 result);
1012 return result;
1013 }
1014 }
1015
1016 return usb_serial_generic_resume(serial);
1017}
1018
1019static struct usb_serial_driver f81232_device = {
1020 .driver = {
1021 .owner = THIS_MODULE,
1022 .name = "f81232",
1023 },
1024 .id_table = f81232_id_table,
1025 .num_ports = 1,
1026 .bulk_in_size = 256,
1027 .bulk_out_size = 256,
1028 .open = f81232_open,
1029 .close = f81232_close,
1030 .dtr_rts = f81232_dtr_rts,
1031 .carrier_raised = f81232_carrier_raised,
1032 .get_serial = f81232_get_serial_info,
1033 .break_ctl = f81232_break_ctl,
1034 .set_termios = f81232_set_termios,
1035 .tiocmget = f81232_tiocmget,
1036 .tiocmset = f81232_tiocmset,
1037 .tiocmiwait = usb_serial_generic_tiocmiwait,
1038 .tx_empty = f81232_tx_empty,
1039 .process_read_urb = f81232_process_read_urb,
1040 .read_int_callback = f81232_read_int_callback,
1041 .port_probe = f81232_port_probe,
1042 .suspend = f81232_suspend,
1043 .resume = f81232_resume,
1044};
1045
1046static struct usb_serial_driver f81534a_device = {
1047 .driver = {
1048 .owner = THIS_MODULE,
1049 .name = "f81534a",
1050 },
1051 .id_table = f81534a_id_table,
1052 .num_ports = 1,
1053 .open = f81534a_open,
1054 .close = f81232_close,
1055 .dtr_rts = f81232_dtr_rts,
1056 .carrier_raised = f81232_carrier_raised,
1057 .get_serial = f81232_get_serial_info,
1058 .break_ctl = f81232_break_ctl,
1059 .set_termios = f81232_set_termios,
1060 .tiocmget = f81232_tiocmget,
1061 .tiocmset = f81232_tiocmset,
1062 .tiocmiwait = usb_serial_generic_tiocmiwait,
1063 .tx_empty = f81232_tx_empty,
1064 .process_read_urb = f81534a_process_read_urb,
1065 .read_int_callback = f81232_read_int_callback,
1066 .port_probe = f81534a_port_probe,
1067 .suspend = f81232_suspend,
1068 .resume = f81232_resume,
1069};
1070
1071static struct usb_serial_driver * const serial_drivers[] = {
1072 &f81232_device,
1073 &f81534a_device,
1074 NULL,
1075};
1076
1077static struct usb_driver f81534a_ctrl_driver = {
1078 .name = "f81534a_ctrl",
1079 .id_table = f81534a_ctrl_id_table,
1080 .probe = f81534a_ctrl_probe,
1081 .disconnect = f81534a_ctrl_disconnect,
1082 .resume = f81534a_ctrl_resume,
1083};
1084
1085static int __init f81232_init(void)
1086{
1087 int status;
1088
1089 status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE,
1090 KBUILD_MODNAME);
1091 if (status)
1092 return status;
1093
1094 status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME,
1095 combined_id_table);
1096 if (status) {
1097 usb_deregister(&f81534a_ctrl_driver);
1098 return status;
1099 }
1100
1101 return 0;
1102}
1103
1104static void __exit f81232_exit(void)
1105{
1106 usb_serial_deregister_drivers(serial_drivers);
1107 usb_deregister(&f81534a_ctrl_driver);
1108}
1109
1110module_init(f81232_init);
1111module_exit(f81232_exit);
1112
1113MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver");
1114MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
1115MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
1116MODULE_LICENSE("GPL v2");
1117
