1
2
3menuconfig ARCH_DAVINCI
4 bool "TI DaVinci"
5 depends on ARCH_MULTI_V5
6 select DAVINCI_TIMER
7 select ZONE_DMA
8 select ARCH_HAS_HOLES_MEMORYMODEL
9 select PM_GENERIC_DOMAINS if PM
10 select PM_GENERIC_DOMAINS_OF if PM && OF
11 select REGMAP_MMIO
12 select RESET_CONTROLLER
13 select HAVE_IDE
14 select PINCTRL_SINGLE
15
16if ARCH_DAVINCI
17
18config ARCH_DAVINCI_DMx
19 bool
20
21comment "DaVinci Core Type"
22
23config ARCH_DAVINCI_DM644x
24 bool "DaVinci 644x based system"
25 select DAVINCI_AINTC
26 select ARCH_DAVINCI_DMx
27
28config ARCH_DAVINCI_DM355
29 bool "DaVinci 355 based system"
30 select DAVINCI_AINTC
31 select ARCH_DAVINCI_DMx
32
33config ARCH_DAVINCI_DM646x
34 bool "DaVinci 646x based system"
35 select DAVINCI_AINTC
36 select ARCH_DAVINCI_DMx
37
38config ARCH_DAVINCI_DA830
39 bool "DA830/OMAP-L137/AM17x based system"
40 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
41 select ARCH_DAVINCI_DA8XX
42
43 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
44 select DAVINCI_CP_INTC
45
46config ARCH_DAVINCI_DA850
47 bool "DA850/OMAP-L138/AM18x based system"
48 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
49 select ARCH_DAVINCI_DA8XX
50 select DAVINCI_CP_INTC
51
52config ARCH_DAVINCI_DA8XX
53 bool
54
55config ARCH_DAVINCI_DM365
56 bool "DaVinci 365 based system"
57 select DAVINCI_AINTC
58 select ARCH_DAVINCI_DMx
59
60comment "DaVinci Board Type"
61
62config MACH_DA8XX_DT
63 bool "Support DA8XX platforms using device tree"
64 default y
65 depends on ARCH_DAVINCI_DA850
66 select PINCTRL
67 help
68 Say y here to include support for TI DaVinci DA850 based using
69 Flattened Device Tree. More information at Documentation/devicetree
70
71config MACH_DAVINCI_EVM
72 bool "TI DM644x EVM"
73 default ARCH_DAVINCI_DM644x
74 depends on ARCH_DAVINCI_DM644x
75 help
76 Configure this option to specify the whether the board used
77 for development is a DM644x EVM
78
79config MACH_SFFSDR
80 bool "Lyrtech SFFSDR"
81 depends on ARCH_DAVINCI_DM644x
82 help
83 Say Y here to select the Lyrtech Small Form Factor
84 Software Defined Radio (SFFSDR) board.
85
86config MACH_NEUROS_OSD2
87 bool "Neuros OSD2 Open Television Set Top Box"
88 depends on ARCH_DAVINCI_DM644x
89 help
90 Configure this option to specify the whether the board used
91 for development is a Neuros OSD2 Open Set Top Box.
92
93config MACH_DAVINCI_DM355_EVM
94 bool "TI DM355 EVM"
95 default ARCH_DAVINCI_DM355
96 depends on ARCH_DAVINCI_DM355
97 help
98 Configure this option to specify the whether the board used
99 for development is a DM355 EVM
100
101config MACH_DM355_LEOPARD
102 bool "DM355 Leopard board"
103 depends on ARCH_DAVINCI_DM355
104 help
105 Configure this option to specify the whether the board used
106 for development is a DM355 Leopard board.
107
108config MACH_DAVINCI_DM6467_EVM
109 bool "TI DM6467 EVM"
110 default ARCH_DAVINCI_DM646x
111 depends on ARCH_DAVINCI_DM646x
112 select MACH_DAVINCI_DM6467TEVM
113 help
114 Configure this option to specify the whether the board used
115 for development is a DM6467 EVM
116
117config MACH_DAVINCI_DM6467TEVM
118 bool
119
120config MACH_DAVINCI_DM365_EVM
121 bool "TI DM365 EVM"
122 default ARCH_DAVINCI_DM365
123 depends on ARCH_DAVINCI_DM365
124 help
125 Configure this option to specify whether the board used
126 for development is a DM365 EVM
127
128config MACH_DAVINCI_DA830_EVM
129 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
130 default ARCH_DAVINCI_DA830
131 depends on ARCH_DAVINCI_DA830
132 select GPIO_PCF857X if I2C
133 help
134 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
135
136choice
137 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
138 depends on MACH_DAVINCI_DA830_EVM
139 help
140 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
141 detected automatically based on successful probe of the I2C
142 based GPIO expander on that board. This option selected in this
143 menu has an effect only in case of a successful UI card detection.
144
145config DA830_UI_LCD
146 bool "LCD"
147 help
148 Say Y here to use the LCD as a framebuffer or simple character
149 display.
150
151config DA830_UI_NAND
152 bool "NAND flash"
153 help
154 Say Y here to use the NAND flash. Do not forget to setup
155 the switch correctly.
156endchoice
157
158config MACH_DAVINCI_DA850_EVM
159 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
160 default ARCH_DAVINCI_DA850
161 depends on ARCH_DAVINCI_DA850
162 help
163 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
164
165choice
166 prompt "Select peripherals connected to expander on UI board"
167 depends on MACH_DAVINCI_DA850_EVM
168 help
169 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
170 EVM is detected automatically based on successful probe of the I2C
171 based GPIO expander on that card. This option selected in this
172 menu has an effect only in case of a successful UI card detection.
173
174config DA850_UI_NONE
175 bool "No peripheral is enabled"
176 help
177 Say Y if you do not want to enable any of the peripherals connected
178 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
179
180config DA850_UI_RMII
181 bool "RMII Ethernet PHY"
182 help
183 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
184 EVM. This PHY is found on the UI daughter card that is supplied with
185 the EVM.
186 NOTE: Please take care while choosing this option, MII PHY will
187 not be functional if RMII mode is selected.
188
189config DA850_UI_SD_VIDEO_PORT
190 bool "Video Port Interface"
191 help
192 Say Y if you want to use Video Port Interface (VPIF) on the
193 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
194 UI daughter card that is supplied with the EVM.
195
196endchoice
197
198config MACH_MITYOMAPL138
199 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
200 depends on ARCH_DAVINCI_DA850
201 help
202 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
203 System on Module. Information on this SoM may be found at
204 https://www.mitydsp.com
205
206config MACH_OMAPL138_HAWKBOARD
207 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
208 depends on ARCH_DAVINCI_DA850
209 help
210 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
211
212config DAVINCI_MUX
213 bool "DAVINCI multiplexing support"
214 depends on ARCH_DAVINCI
215 default y
216 help
217 Pin multiplexing support for DAVINCI boards. If your bootloader
218 sets the multiplexing correctly, say N. Otherwise, or if unsure,
219 say Y.
220
221config DAVINCI_MUX_DEBUG
222 bool "Multiplexing debug output"
223 depends on DAVINCI_MUX
224 help
225 Makes the multiplexing functions print out a lot of debug info.
226 This is useful if you want to find out the correct values of the
227 multiplexing registers.
228
229config DAVINCI_MUX_WARNINGS
230 bool "Warn about pins the bootloader didn't set up"
231 depends on DAVINCI_MUX
232 help
233 Choose Y here to warn whenever driver initialization logic needs
234 to change the pin multiplexing setup. When there are no warnings
235 printed, it's safe to deselect DAVINCI_MUX for your product.
236
237endif
238
