linux/arch/powerpc/kernel/rtas.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 *
   4 * Procedures for interfacing to the RTAS on CHRP machines.
   5 *
   6 * Peter Bergner, IBM   March 2001.
   7 * Copyright (C) 2001 IBM.
   8 */
   9
  10#include <stdarg.h>
  11#include <linux/kernel.h>
  12#include <linux/types.h>
  13#include <linux/spinlock.h>
  14#include <linux/export.h>
  15#include <linux/init.h>
  16#include <linux/capability.h>
  17#include <linux/delay.h>
  18#include <linux/cpu.h>
  19#include <linux/sched.h>
  20#include <linux/smp.h>
  21#include <linux/completion.h>
  22#include <linux/cpumask.h>
  23#include <linux/memblock.h>
  24#include <linux/slab.h>
  25#include <linux/reboot.h>
  26#include <linux/syscalls.h>
  27
  28#include <asm/prom.h>
  29#include <asm/rtas.h>
  30#include <asm/hvcall.h>
  31#include <asm/machdep.h>
  32#include <asm/firmware.h>
  33#include <asm/page.h>
  34#include <asm/param.h>
  35#include <asm/delay.h>
  36#include <linux/uaccess.h>
  37#include <asm/udbg.h>
  38#include <asm/syscalls.h>
  39#include <asm/smp.h>
  40#include <linux/atomic.h>
  41#include <asm/time.h>
  42#include <asm/mmu.h>
  43#include <asm/topology.h>
  44#include <asm/paca.h>
  45
  46/* This is here deliberately so it's only used in this file */
  47void enter_rtas(unsigned long);
  48
  49struct rtas_t rtas = {
  50        .lock = __ARCH_SPIN_LOCK_UNLOCKED
  51};
  52EXPORT_SYMBOL(rtas);
  53
  54DEFINE_SPINLOCK(rtas_data_buf_lock);
  55EXPORT_SYMBOL(rtas_data_buf_lock);
  56
  57char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
  58EXPORT_SYMBOL(rtas_data_buf);
  59
  60unsigned long rtas_rmo_buf;
  61
  62/*
  63 * If non-NULL, this gets called when the kernel terminates.
  64 * This is done like this so rtas_flash can be a module.
  65 */
  66void (*rtas_flash_term_hook)(int);
  67EXPORT_SYMBOL(rtas_flash_term_hook);
  68
  69/* RTAS use home made raw locking instead of spin_lock_irqsave
  70 * because those can be called from within really nasty contexts
  71 * such as having the timebase stopped which would lockup with
  72 * normal locks and spinlock debugging enabled
  73 */
  74static unsigned long lock_rtas(void)
  75{
  76        unsigned long flags;
  77
  78        local_irq_save(flags);
  79        preempt_disable();
  80        arch_spin_lock(&rtas.lock);
  81        return flags;
  82}
  83
  84static void unlock_rtas(unsigned long flags)
  85{
  86        arch_spin_unlock(&rtas.lock);
  87        local_irq_restore(flags);
  88        preempt_enable();
  89}
  90
  91/*
  92 * call_rtas_display_status and call_rtas_display_status_delay
  93 * are designed only for very early low-level debugging, which
  94 * is why the token is hard-coded to 10.
  95 */
  96static void call_rtas_display_status(unsigned char c)
  97{
  98        unsigned long s;
  99
 100        if (!rtas.base)
 101                return;
 102
 103        s = lock_rtas();
 104        rtas_call_unlocked(&rtas.args, 10, 1, 1, NULL, c);
 105        unlock_rtas(s);
 106}
 107
 108static void call_rtas_display_status_delay(char c)
 109{
 110        static int pending_newline = 0;  /* did last write end with unprinted newline? */
 111        static int width = 16;
 112
 113        if (c == '\n') {        
 114                while (width-- > 0)
 115                        call_rtas_display_status(' ');
 116                width = 16;
 117                mdelay(500);
 118                pending_newline = 1;
 119        } else {
 120                if (pending_newline) {
 121                        call_rtas_display_status('\r');
 122                        call_rtas_display_status('\n');
 123                } 
 124                pending_newline = 0;
 125                if (width--) {
 126                        call_rtas_display_status(c);
 127                        udelay(10000);
 128                }
 129        }
 130}
 131
 132void __init udbg_init_rtas_panel(void)
 133{
 134        udbg_putc = call_rtas_display_status_delay;
 135}
 136
 137#ifdef CONFIG_UDBG_RTAS_CONSOLE
 138
 139/* If you think you're dying before early_init_dt_scan_rtas() does its
 140 * work, you can hard code the token values for your firmware here and
 141 * hardcode rtas.base/entry etc.
 142 */
 143static unsigned int rtas_putchar_token = RTAS_UNKNOWN_SERVICE;
 144static unsigned int rtas_getchar_token = RTAS_UNKNOWN_SERVICE;
 145
 146static void udbg_rtascon_putc(char c)
 147{
 148        int tries;
 149
 150        if (!rtas.base)
 151                return;
 152
 153        /* Add CRs before LFs */
 154        if (c == '\n')
 155                udbg_rtascon_putc('\r');
 156
 157        /* if there is more than one character to be displayed, wait a bit */
 158        for (tries = 0; tries < 16; tries++) {
 159                if (rtas_call(rtas_putchar_token, 1, 1, NULL, c) == 0)
 160                        break;
 161                udelay(1000);
 162        }
 163}
 164
 165static int udbg_rtascon_getc_poll(void)
 166{
 167        int c;
 168
 169        if (!rtas.base)
 170                return -1;
 171
 172        if (rtas_call(rtas_getchar_token, 0, 2, &c))
 173                return -1;
 174
 175        return c;
 176}
 177
 178static int udbg_rtascon_getc(void)
 179{
 180        int c;
 181
 182        while ((c = udbg_rtascon_getc_poll()) == -1)
 183                ;
 184
 185        return c;
 186}
 187
 188
 189void __init udbg_init_rtas_console(void)
 190{
 191        udbg_putc = udbg_rtascon_putc;
 192        udbg_getc = udbg_rtascon_getc;
 193        udbg_getc_poll = udbg_rtascon_getc_poll;
 194}
 195#endif /* CONFIG_UDBG_RTAS_CONSOLE */
 196
 197void rtas_progress(char *s, unsigned short hex)
 198{
 199        struct device_node *root;
 200        int width;
 201        const __be32 *p;
 202        char *os;
 203        static int display_character, set_indicator;
 204        static int display_width, display_lines, form_feed;
 205        static const int *row_width;
 206        static DEFINE_SPINLOCK(progress_lock);
 207        static int current_line;
 208        static int pending_newline = 0;  /* did last write end with unprinted newline? */
 209
 210        if (!rtas.base)
 211                return;
 212
 213        if (display_width == 0) {
 214                display_width = 0x10;
 215                if ((root = of_find_node_by_path("/rtas"))) {
 216                        if ((p = of_get_property(root,
 217                                        "ibm,display-line-length", NULL)))
 218                                display_width = be32_to_cpu(*p);
 219                        if ((p = of_get_property(root,
 220                                        "ibm,form-feed", NULL)))
 221                                form_feed = be32_to_cpu(*p);
 222                        if ((p = of_get_property(root,
 223                                        "ibm,display-number-of-lines", NULL)))
 224                                display_lines = be32_to_cpu(*p);
 225                        row_width = of_get_property(root,
 226                                        "ibm,display-truncation-length", NULL);
 227                        of_node_put(root);
 228                }
 229                display_character = rtas_token("display-character");
 230                set_indicator = rtas_token("set-indicator");
 231        }
 232
 233        if (display_character == RTAS_UNKNOWN_SERVICE) {
 234                /* use hex display if available */
 235                if (set_indicator != RTAS_UNKNOWN_SERVICE)
 236                        rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex);
 237                return;
 238        }
 239
 240        spin_lock(&progress_lock);
 241
 242        /*
 243         * Last write ended with newline, but we didn't print it since
 244         * it would just clear the bottom line of output. Print it now
 245         * instead.
 246         *
 247         * If no newline is pending and form feed is supported, clear the
 248         * display with a form feed; otherwise, print a CR to start output
 249         * at the beginning of the line.
 250         */
 251        if (pending_newline) {
 252                rtas_call(display_character, 1, 1, NULL, '\r');
 253                rtas_call(display_character, 1, 1, NULL, '\n');
 254                pending_newline = 0;
 255        } else {
 256                current_line = 0;
 257                if (form_feed)
 258                        rtas_call(display_character, 1, 1, NULL,
 259                                  (char)form_feed);
 260                else
 261                        rtas_call(display_character, 1, 1, NULL, '\r');
 262        }
 263 
 264        if (row_width)
 265                width = row_width[current_line];
 266        else
 267                width = display_width;
 268        os = s;
 269        while (*os) {
 270                if (*os == '\n' || *os == '\r') {
 271                        /* If newline is the last character, save it
 272                         * until next call to avoid bumping up the
 273                         * display output.
 274                         */
 275                        if (*os == '\n' && !os[1]) {
 276                                pending_newline = 1;
 277                                current_line++;
 278                                if (current_line > display_lines-1)
 279                                        current_line = display_lines-1;
 280                                spin_unlock(&progress_lock);
 281                                return;
 282                        }
 283 
 284                        /* RTAS wants CR-LF, not just LF */
 285 
 286                        if (*os == '\n') {
 287                                rtas_call(display_character, 1, 1, NULL, '\r');
 288                                rtas_call(display_character, 1, 1, NULL, '\n');
 289                        } else {
 290                                /* CR might be used to re-draw a line, so we'll
 291                                 * leave it alone and not add LF.
 292                                 */
 293                                rtas_call(display_character, 1, 1, NULL, *os);
 294                        }
 295 
 296                        if (row_width)
 297                                width = row_width[current_line];
 298                        else
 299                                width = display_width;
 300                } else {
 301                        width--;
 302                        rtas_call(display_character, 1, 1, NULL, *os);
 303                }
 304 
 305                os++;
 306 
 307                /* if we overwrite the screen length */
 308                if (width <= 0)
 309                        while ((*os != 0) && (*os != '\n') && (*os != '\r'))
 310                                os++;
 311        }
 312 
 313        spin_unlock(&progress_lock);
 314}
 315EXPORT_SYMBOL(rtas_progress);           /* needed by rtas_flash module */
 316
 317int rtas_token(const char *service)
 318{
 319        const __be32 *tokp;
 320        if (rtas.dev == NULL)
 321                return RTAS_UNKNOWN_SERVICE;
 322        tokp = of_get_property(rtas.dev, service, NULL);
 323        return tokp ? be32_to_cpu(*tokp) : RTAS_UNKNOWN_SERVICE;
 324}
 325EXPORT_SYMBOL(rtas_token);
 326
 327int rtas_service_present(const char *service)
 328{
 329        return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
 330}
 331EXPORT_SYMBOL(rtas_service_present);
 332
 333#ifdef CONFIG_RTAS_ERROR_LOGGING
 334/*
 335 * Return the firmware-specified size of the error log buffer
 336 *  for all rtas calls that require an error buffer argument.
 337 *  This includes 'check-exception' and 'rtas-last-error'.
 338 */
 339int rtas_get_error_log_max(void)
 340{
 341        static int rtas_error_log_max;
 342        if (rtas_error_log_max)
 343                return rtas_error_log_max;
 344
 345        rtas_error_log_max = rtas_token ("rtas-error-log-max");
 346        if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) ||
 347            (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) {
 348                printk (KERN_WARNING "RTAS: bad log buffer size %d\n",
 349                        rtas_error_log_max);
 350                rtas_error_log_max = RTAS_ERROR_LOG_MAX;
 351        }
 352        return rtas_error_log_max;
 353}
 354EXPORT_SYMBOL(rtas_get_error_log_max);
 355
 356
 357static char rtas_err_buf[RTAS_ERROR_LOG_MAX];
 358static int rtas_last_error_token;
 359
 360/** Return a copy of the detailed error text associated with the
 361 *  most recent failed call to rtas.  Because the error text
 362 *  might go stale if there are any other intervening rtas calls,
 363 *  this routine must be called atomically with whatever produced
 364 *  the error (i.e. with rtas.lock still held from the previous call).
 365 */
 366static char *__fetch_rtas_last_error(char *altbuf)
 367{
 368        struct rtas_args err_args, save_args;
 369        u32 bufsz;
 370        char *buf = NULL;
 371
 372        if (rtas_last_error_token == -1)
 373                return NULL;
 374
 375        bufsz = rtas_get_error_log_max();
 376
 377        err_args.token = cpu_to_be32(rtas_last_error_token);
 378        err_args.nargs = cpu_to_be32(2);
 379        err_args.nret = cpu_to_be32(1);
 380        err_args.args[0] = cpu_to_be32(__pa(rtas_err_buf));
 381        err_args.args[1] = cpu_to_be32(bufsz);
 382        err_args.args[2] = 0;
 383
 384        save_args = rtas.args;
 385        rtas.args = err_args;
 386
 387        enter_rtas(__pa(&rtas.args));
 388
 389        err_args = rtas.args;
 390        rtas.args = save_args;
 391
 392        /* Log the error in the unlikely case that there was one. */
 393        if (unlikely(err_args.args[2] == 0)) {
 394                if (altbuf) {
 395                        buf = altbuf;
 396                } else {
 397                        buf = rtas_err_buf;
 398                        if (slab_is_available())
 399                                buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
 400                }
 401                if (buf)
 402                        memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
 403        }
 404
 405        return buf;
 406}
 407
 408#define get_errorlog_buffer()   kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL)
 409
 410#else /* CONFIG_RTAS_ERROR_LOGGING */
 411#define __fetch_rtas_last_error(x)      NULL
 412#define get_errorlog_buffer()           NULL
 413#endif
 414
 415
 416static void
 417va_rtas_call_unlocked(struct rtas_args *args, int token, int nargs, int nret,
 418                      va_list list)
 419{
 420        int i;
 421
 422        args->token = cpu_to_be32(token);
 423        args->nargs = cpu_to_be32(nargs);
 424        args->nret  = cpu_to_be32(nret);
 425        args->rets  = &(args->args[nargs]);
 426
 427        for (i = 0; i < nargs; ++i)
 428                args->args[i] = cpu_to_be32(va_arg(list, __u32));
 429
 430        for (i = 0; i < nret; ++i)
 431                args->rets[i] = 0;
 432
 433        enter_rtas(__pa(args));
 434}
 435
 436void rtas_call_unlocked(struct rtas_args *args, int token, int nargs, int nret, ...)
 437{
 438        va_list list;
 439
 440        va_start(list, nret);
 441        va_rtas_call_unlocked(args, token, nargs, nret, list);
 442        va_end(list);
 443}
 444
 445int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 446{
 447        va_list list;
 448        int i;
 449        unsigned long s;
 450        struct rtas_args *rtas_args;
 451        char *buff_copy = NULL;
 452        int ret;
 453
 454        if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 455                return -1;
 456
 457        s = lock_rtas();
 458
 459        /* We use the global rtas args buffer */
 460        rtas_args = &rtas.args;
 461
 462        va_start(list, outputs);
 463        va_rtas_call_unlocked(rtas_args, token, nargs, nret, list);
 464        va_end(list);
 465
 466        /* A -1 return code indicates that the last command couldn't
 467           be completed due to a hardware error. */
 468        if (be32_to_cpu(rtas_args->rets[0]) == -1)
 469                buff_copy = __fetch_rtas_last_error(NULL);
 470
 471        if (nret > 1 && outputs != NULL)
 472                for (i = 0; i < nret-1; ++i)
 473                        outputs[i] = be32_to_cpu(rtas_args->rets[i+1]);
 474        ret = (nret > 0)? be32_to_cpu(rtas_args->rets[0]): 0;
 475
 476        unlock_rtas(s);
 477
 478        if (buff_copy) {
 479                log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
 480                if (slab_is_available())
 481                        kfree(buff_copy);
 482        }
 483        return ret;
 484}
 485EXPORT_SYMBOL(rtas_call);
 486
 487/* For RTAS_BUSY (-2), delay for 1 millisecond.  For an extended busy status
 488 * code of 990n, perform the hinted delay of 10^n (last digit) milliseconds.
 489 */
 490unsigned int rtas_busy_delay_time(int status)
 491{
 492        int order;
 493        unsigned int ms = 0;
 494
 495        if (status == RTAS_BUSY) {
 496                ms = 1;
 497        } else if (status >= RTAS_EXTENDED_DELAY_MIN &&
 498                   status <= RTAS_EXTENDED_DELAY_MAX) {
 499                order = status - RTAS_EXTENDED_DELAY_MIN;
 500                for (ms = 1; order > 0; order--)
 501                        ms *= 10;
 502        }
 503
 504        return ms;
 505}
 506EXPORT_SYMBOL(rtas_busy_delay_time);
 507
 508/* For an RTAS busy status code, perform the hinted delay. */
 509unsigned int rtas_busy_delay(int status)
 510{
 511        unsigned int ms;
 512
 513        might_sleep();
 514        ms = rtas_busy_delay_time(status);
 515        if (ms && need_resched())
 516                msleep(ms);
 517
 518        return ms;
 519}
 520EXPORT_SYMBOL(rtas_busy_delay);
 521
 522static int rtas_error_rc(int rtas_rc)
 523{
 524        int rc;
 525
 526        switch (rtas_rc) {
 527                case -1:                /* Hardware Error */
 528                        rc = -EIO;
 529                        break;
 530                case -3:                /* Bad indicator/domain/etc */
 531                        rc = -EINVAL;
 532                        break;
 533                case -9000:             /* Isolation error */
 534                        rc = -EFAULT;
 535                        break;
 536                case -9001:             /* Outstanding TCE/PTE */
 537                        rc = -EEXIST;
 538                        break;
 539                case -9002:             /* No usable slot */
 540                        rc = -ENODEV;
 541                        break;
 542                default:
 543                        printk(KERN_ERR "%s: unexpected RTAS error %d\n",
 544                                        __func__, rtas_rc);
 545                        rc = -ERANGE;
 546                        break;
 547        }
 548        return rc;
 549}
 550
 551int rtas_get_power_level(int powerdomain, int *level)
 552{
 553        int token = rtas_token("get-power-level");
 554        int rc;
 555
 556        if (token == RTAS_UNKNOWN_SERVICE)
 557                return -ENOENT;
 558
 559        while ((rc = rtas_call(token, 1, 2, level, powerdomain)) == RTAS_BUSY)
 560                udelay(1);
 561
 562        if (rc < 0)
 563                return rtas_error_rc(rc);
 564        return rc;
 565}
 566EXPORT_SYMBOL(rtas_get_power_level);
 567
 568int rtas_set_power_level(int powerdomain, int level, int *setlevel)
 569{
 570        int token = rtas_token("set-power-level");
 571        int rc;
 572
 573        if (token == RTAS_UNKNOWN_SERVICE)
 574                return -ENOENT;
 575
 576        do {
 577                rc = rtas_call(token, 2, 2, setlevel, powerdomain, level);
 578        } while (rtas_busy_delay(rc));
 579
 580        if (rc < 0)
 581                return rtas_error_rc(rc);
 582        return rc;
 583}
 584EXPORT_SYMBOL(rtas_set_power_level);
 585
 586int rtas_get_sensor(int sensor, int index, int *state)
 587{
 588        int token = rtas_token("get-sensor-state");
 589        int rc;
 590
 591        if (token == RTAS_UNKNOWN_SERVICE)
 592                return -ENOENT;
 593
 594        do {
 595                rc = rtas_call(token, 2, 2, state, sensor, index);
 596        } while (rtas_busy_delay(rc));
 597
 598        if (rc < 0)
 599                return rtas_error_rc(rc);
 600        return rc;
 601}
 602EXPORT_SYMBOL(rtas_get_sensor);
 603
 604int rtas_get_sensor_fast(int sensor, int index, int *state)
 605{
 606        int token = rtas_token("get-sensor-state");
 607        int rc;
 608
 609        if (token == RTAS_UNKNOWN_SERVICE)
 610                return -ENOENT;
 611
 612        rc = rtas_call(token, 2, 2, state, sensor, index);
 613        WARN_ON(rc == RTAS_BUSY || (rc >= RTAS_EXTENDED_DELAY_MIN &&
 614                                    rc <= RTAS_EXTENDED_DELAY_MAX));
 615
 616        if (rc < 0)
 617                return rtas_error_rc(rc);
 618        return rc;
 619}
 620
 621bool rtas_indicator_present(int token, int *maxindex)
 622{
 623        int proplen, count, i;
 624        const struct indicator_elem {
 625                __be32 token;
 626                __be32 maxindex;
 627        } *indicators;
 628
 629        indicators = of_get_property(rtas.dev, "rtas-indicators", &proplen);
 630        if (!indicators)
 631                return false;
 632
 633        count = proplen / sizeof(struct indicator_elem);
 634
 635        for (i = 0; i < count; i++) {
 636                if (__be32_to_cpu(indicators[i].token) != token)
 637                        continue;
 638                if (maxindex)
 639                        *maxindex = __be32_to_cpu(indicators[i].maxindex);
 640                return true;
 641        }
 642
 643        return false;
 644}
 645EXPORT_SYMBOL(rtas_indicator_present);
 646
 647int rtas_set_indicator(int indicator, int index, int new_value)
 648{
 649        int token = rtas_token("set-indicator");
 650        int rc;
 651
 652        if (token == RTAS_UNKNOWN_SERVICE)
 653                return -ENOENT;
 654
 655        do {
 656                rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
 657        } while (rtas_busy_delay(rc));
 658
 659        if (rc < 0)
 660                return rtas_error_rc(rc);
 661        return rc;
 662}
 663EXPORT_SYMBOL(rtas_set_indicator);
 664
 665/*
 666 * Ignoring RTAS extended delay
 667 */
 668int rtas_set_indicator_fast(int indicator, int index, int new_value)
 669{
 670        int rc;
 671        int token = rtas_token("set-indicator");
 672
 673        if (token == RTAS_UNKNOWN_SERVICE)
 674                return -ENOENT;
 675
 676        rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
 677
 678        WARN_ON(rc == RTAS_BUSY || (rc >= RTAS_EXTENDED_DELAY_MIN &&
 679                                    rc <= RTAS_EXTENDED_DELAY_MAX));
 680
 681        if (rc < 0)
 682                return rtas_error_rc(rc);
 683
 684        return rc;
 685}
 686
 687void __noreturn rtas_restart(char *cmd)
 688{
 689        if (rtas_flash_term_hook)
 690                rtas_flash_term_hook(SYS_RESTART);
 691        printk("RTAS system-reboot returned %d\n",
 692               rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
 693        for (;;);
 694}
 695
 696void rtas_power_off(void)
 697{
 698        if (rtas_flash_term_hook)
 699                rtas_flash_term_hook(SYS_POWER_OFF);
 700        /* allow power on only with power button press */
 701        printk("RTAS power-off returned %d\n",
 702               rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
 703        for (;;);
 704}
 705
 706void __noreturn rtas_halt(void)
 707{
 708        if (rtas_flash_term_hook)
 709                rtas_flash_term_hook(SYS_HALT);
 710        /* allow power on only with power button press */
 711        printk("RTAS power-off returned %d\n",
 712               rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
 713        for (;;);
 714}
 715
 716/* Must be in the RMO region, so we place it here */
 717static char rtas_os_term_buf[2048];
 718
 719void rtas_os_term(char *str)
 720{
 721        int status;
 722
 723        /*
 724         * Firmware with the ibm,extended-os-term property is guaranteed
 725         * to always return from an ibm,os-term call. Earlier versions without
 726         * this property may terminate the partition which we want to avoid
 727         * since it interferes with panic_timeout.
 728         */
 729        if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") ||
 730            RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term"))
 731                return;
 732
 733        snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
 734
 735        do {
 736                status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
 737                                   __pa(rtas_os_term_buf));
 738        } while (rtas_busy_delay(status));
 739
 740        if (status != 0)
 741                printk(KERN_EMERG "ibm,os-term call failed %d\n", status);
 742}
 743
 744static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
 745#ifdef CONFIG_PPC_PSERIES
 746static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_when_done)
 747{
 748        u16 slb_size = mmu_slb_size;
 749        int rc = H_MULTI_THREADS_ACTIVE;
 750        int cpu;
 751
 752        slb_set_size(SLB_MIN_SIZE);
 753        printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
 754
 755        while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
 756               !atomic_read(&data->error))
 757                rc = rtas_call(data->token, 0, 1, NULL);
 758
 759        if (rc || atomic_read(&data->error)) {
 760                printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc);
 761                slb_set_size(slb_size);
 762        }
 763
 764        if (atomic_read(&data->error))
 765                rc = atomic_read(&data->error);
 766
 767        atomic_set(&data->error, rc);
 768        pSeries_coalesce_init();
 769
 770        if (wake_when_done) {
 771                atomic_set(&data->done, 1);
 772
 773                for_each_online_cpu(cpu)
 774                        plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
 775        }
 776
 777        if (atomic_dec_return(&data->working) == 0)
 778                complete(data->complete);
 779
 780        return rc;
 781}
 782
 783int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data)
 784{
 785        atomic_inc(&data->working);
 786        return __rtas_suspend_last_cpu(data, 0);
 787}
 788
 789static int __rtas_suspend_cpu(struct rtas_suspend_me_data *data, int wake_when_done)
 790{
 791        long rc = H_SUCCESS;
 792        unsigned long msr_save;
 793        int cpu;
 794
 795        atomic_inc(&data->working);
 796
 797        /* really need to ensure MSR.EE is off for H_JOIN */
 798        msr_save = mfmsr();
 799        mtmsr(msr_save & ~(MSR_EE));
 800
 801        while (rc == H_SUCCESS && !atomic_read(&data->done) && !atomic_read(&data->error))
 802                rc = plpar_hcall_norets(H_JOIN);
 803
 804        mtmsr(msr_save);
 805
 806        if (rc == H_SUCCESS) {
 807                /* This cpu was prodded and the suspend is complete. */
 808                goto out;
 809        } else if (rc == H_CONTINUE) {
 810                /* All other cpus are in H_JOIN, this cpu does
 811                 * the suspend.
 812                 */
 813                return __rtas_suspend_last_cpu(data, wake_when_done);
 814        } else {
 815                printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
 816                       smp_processor_id(), rc);
 817                atomic_set(&data->error, rc);
 818        }
 819
 820        if (wake_when_done) {
 821                atomic_set(&data->done, 1);
 822
 823                /* This cpu did the suspend or got an error; in either case,
 824                 * we need to prod all other other cpus out of join state.
 825                 * Extra prods are harmless.
 826                 */
 827                for_each_online_cpu(cpu)
 828                        plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
 829        }
 830out:
 831        if (atomic_dec_return(&data->working) == 0)
 832                complete(data->complete);
 833        return rc;
 834}
 835
 836int rtas_suspend_cpu(struct rtas_suspend_me_data *data)
 837{
 838        return __rtas_suspend_cpu(data, 0);
 839}
 840
 841static void rtas_percpu_suspend_me(void *info)
 842{
 843        __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1);
 844}
 845
 846int rtas_ibm_suspend_me(u64 handle)
 847{
 848        long state;
 849        long rc;
 850        unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 851        struct rtas_suspend_me_data data;
 852        DECLARE_COMPLETION_ONSTACK(done);
 853
 854        if (!rtas_service_present("ibm,suspend-me"))
 855                return -ENOSYS;
 856
 857        /* Make sure the state is valid */
 858        rc = plpar_hcall(H_VASI_STATE, retbuf, handle);
 859
 860        state = retbuf[0];
 861
 862        if (rc) {
 863                printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned %ld\n",rc);
 864                return rc;
 865        } else if (state == H_VASI_ENABLED) {
 866                return -EAGAIN;
 867        } else if (state != H_VASI_SUSPENDING) {
 868                printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned state %ld\n",
 869                       state);
 870                return -EIO;
 871        }
 872
 873        atomic_set(&data.working, 0);
 874        atomic_set(&data.done, 0);
 875        atomic_set(&data.error, 0);
 876        data.token = rtas_token("ibm,suspend-me");
 877        data.complete = &done;
 878
 879        lock_device_hotplug();
 880
 881        cpu_hotplug_disable();
 882
 883        /* Call function on all CPUs.  One of us will make the
 884         * rtas call
 885         */
 886        on_each_cpu(rtas_percpu_suspend_me, &data, 0);
 887
 888        wait_for_completion(&done);
 889
 890        if (atomic_read(&data.error) != 0)
 891                printk(KERN_ERR "Error doing global join\n");
 892
 893
 894        cpu_hotplug_enable();
 895
 896        unlock_device_hotplug();
 897
 898        return atomic_read(&data.error);
 899}
 900
 901/**
 902 * rtas_call_reentrant() - Used for reentrant rtas calls
 903 * @token:      Token for desired reentrant RTAS call
 904 * @nargs:      Number of Input Parameters
 905 * @nret:       Number of Output Parameters
 906 * @outputs:    Array of outputs
 907 * @...:        Inputs for desired RTAS call
 908 *
 909 * According to LoPAR documentation, only "ibm,int-on", "ibm,int-off",
 910 * "ibm,get-xive" and "ibm,set-xive" are currently reentrant.
 911 * Reentrant calls need their own rtas_args buffer, so not using rtas.args, but
 912 * PACA one instead.
 913 *
 914 * Return:      -1 on error,
 915 *              First output value of RTAS call if (nret > 0),
 916 *              0 otherwise,
 917 */
 918int rtas_call_reentrant(int token, int nargs, int nret, int *outputs, ...)
 919{
 920        va_list list;
 921        struct rtas_args *args;
 922        unsigned long flags;
 923        int i, ret = 0;
 924
 925        if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 926                return -1;
 927
 928        local_irq_save(flags);
 929        preempt_disable();
 930
 931        /* We use the per-cpu (PACA) rtas args buffer */
 932        args = local_paca->rtas_args_reentrant;
 933
 934        va_start(list, outputs);
 935        va_rtas_call_unlocked(args, token, nargs, nret, list);
 936        va_end(list);
 937
 938        if (nret > 1 && outputs)
 939                for (i = 0; i < nret - 1; ++i)
 940                        outputs[i] = be32_to_cpu(args->rets[i + 1]);
 941
 942        if (nret > 0)
 943                ret = be32_to_cpu(args->rets[0]);
 944
 945        local_irq_restore(flags);
 946        preempt_enable();
 947
 948        return ret;
 949}
 950
 951#else /* CONFIG_PPC_PSERIES */
 952int rtas_ibm_suspend_me(u64 handle)
 953{
 954        return -ENOSYS;
 955}
 956#endif
 957
 958/**
 959 * Find a specific pseries error log in an RTAS extended event log.
 960 * @log: RTAS error/event log
 961 * @section_id: two character section identifier
 962 *
 963 * Returns a pointer to the specified errorlog or NULL if not found.
 964 */
 965struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
 966                                              uint16_t section_id)
 967{
 968        struct rtas_ext_event_log_v6 *ext_log =
 969                (struct rtas_ext_event_log_v6 *)log->buffer;
 970        struct pseries_errorlog *sect;
 971        unsigned char *p, *log_end;
 972        uint32_t ext_log_length = rtas_error_extended_log_length(log);
 973        uint8_t log_format = rtas_ext_event_log_format(ext_log);
 974        uint32_t company_id = rtas_ext_event_company_id(ext_log);
 975
 976        /* Check that we understand the format */
 977        if (ext_log_length < sizeof(struct rtas_ext_event_log_v6) ||
 978            log_format != RTAS_V6EXT_LOG_FORMAT_EVENT_LOG ||
 979            company_id != RTAS_V6EXT_COMPANY_ID_IBM)
 980                return NULL;
 981
 982        log_end = log->buffer + ext_log_length;
 983        p = ext_log->vendor_log;
 984
 985        while (p < log_end) {
 986                sect = (struct pseries_errorlog *)p;
 987                if (pseries_errorlog_id(sect) == section_id)
 988                        return sect;
 989                p += pseries_errorlog_length(sect);
 990        }
 991
 992        return NULL;
 993}
 994
 995#ifdef CONFIG_PPC_RTAS_FILTER
 996
 997/*
 998 * The sys_rtas syscall, as originally designed, allows root to pass
 999 * arbitrary physical addresses to RTAS calls. A number of RTAS calls
1000 * can be abused to write to arbitrary memory and do other things that
1001 * are potentially harmful to system integrity, and thus should only
1002 * be used inside the kernel and not exposed to userspace.
1003 *
1004 * All known legitimate users of the sys_rtas syscall will only ever
1005 * pass addresses that fall within the RMO buffer, and use a known
1006 * subset of RTAS calls.
1007 *
1008 * Accordingly, we filter RTAS requests to check that the call is
1009 * permitted, and that provided pointers fall within the RMO buffer.
1010 * The rtas_filters list contains an entry for each permitted call,
1011 * with the indexes of the parameters which are expected to contain
1012 * addresses and sizes of buffers allocated inside the RMO buffer.
1013 */
1014struct rtas_filter {
1015        const char *name;
1016        int token;
1017        /* Indexes into the args buffer, -1 if not used */
1018        int buf_idx1;
1019        int size_idx1;
1020        int buf_idx2;
1021        int size_idx2;
1022
1023        int fixed_size;
1024};
1025
1026static struct rtas_filter rtas_filters[] __ro_after_init = {
1027        { "ibm,activate-firmware", -1, -1, -1, -1, -1 },
1028        { "ibm,configure-connector", -1, 0, -1, 1, -1, 4096 },  /* Special cased */
1029        { "display-character", -1, -1, -1, -1, -1 },
1030        { "ibm,display-message", -1, 0, -1, -1, -1 },
1031        { "ibm,errinjct", -1, 2, -1, -1, -1, 1024 },
1032        { "ibm,close-errinjct", -1, -1, -1, -1, -1 },
1033        { "ibm,open-errinct", -1, -1, -1, -1, -1 },
1034        { "ibm,get-config-addr-info2", -1, -1, -1, -1, -1 },
1035        { "ibm,get-dynamic-sensor-state", -1, 1, -1, -1, -1 },
1036        { "ibm,get-indices", -1, 2, 3, -1, -1 },
1037        { "get-power-level", -1, -1, -1, -1, -1 },
1038        { "get-sensor-state", -1, -1, -1, -1, -1 },
1039        { "ibm,get-system-parameter", -1, 1, 2, -1, -1 },
1040        { "get-time-of-day", -1, -1, -1, -1, -1 },
1041        { "ibm,get-vpd", -1, 0, -1, 1, 2 },
1042        { "ibm,lpar-perftools", -1, 2, 3, -1, -1 },
1043        { "ibm,platform-dump", -1, 4, 5, -1, -1 },
1044        { "ibm,read-slot-reset-state", -1, -1, -1, -1, -1 },
1045        { "ibm,scan-log-dump", -1, 0, 1, -1, -1 },
1046        { "ibm,set-dynamic-indicator", -1, 2, -1, -1, -1 },
1047        { "ibm,set-eeh-option", -1, -1, -1, -1, -1 },
1048        { "set-indicator", -1, -1, -1, -1, -1 },
1049        { "set-power-level", -1, -1, -1, -1, -1 },
1050        { "set-time-for-power-on", -1, -1, -1, -1, -1 },
1051        { "ibm,set-system-parameter", -1, 1, -1, -1, -1 },
1052        { "set-time-of-day", -1, -1, -1, -1, -1 },
1053        { "ibm,suspend-me", -1, -1, -1, -1, -1 },
1054        { "ibm,update-nodes", -1, 0, -1, -1, -1, 4096 },
1055        { "ibm,update-properties", -1, 0, -1, -1, -1, 4096 },
1056        { "ibm,physical-attestation", -1, 0, 1, -1, -1 },
1057};
1058
1059static bool in_rmo_buf(u32 base, u32 end)
1060{
1061        return base >= rtas_rmo_buf &&
1062                base < (rtas_rmo_buf + RTAS_RMOBUF_MAX) &&
1063                base <= end &&
1064                end >= rtas_rmo_buf &&
1065                end < (rtas_rmo_buf + RTAS_RMOBUF_MAX);
1066}
1067
1068static bool block_rtas_call(int token, int nargs,
1069                            struct rtas_args *args)
1070{
1071        int i;
1072
1073        for (i = 0; i < ARRAY_SIZE(rtas_filters); i++) {
1074                struct rtas_filter *f = &rtas_filters[i];
1075                u32 base, size, end;
1076
1077                if (token != f->token)
1078                        continue;
1079
1080                if (f->buf_idx1 != -1) {
1081                        base = be32_to_cpu(args->args[f->buf_idx1]);
1082                        if (f->size_idx1 != -1)
1083                                size = be32_to_cpu(args->args[f->size_idx1]);
1084                        else if (f->fixed_size)
1085                                size = f->fixed_size;
1086                        else
1087                                size = 1;
1088
1089                        end = base + size - 1;
1090                        if (!in_rmo_buf(base, end))
1091                                goto err;
1092                }
1093
1094                if (f->buf_idx2 != -1) {
1095                        base = be32_to_cpu(args->args[f->buf_idx2]);
1096                        if (f->size_idx2 != -1)
1097                                size = be32_to_cpu(args->args[f->size_idx2]);
1098                        else if (f->fixed_size)
1099                                size = f->fixed_size;
1100                        else
1101                                size = 1;
1102                        end = base + size - 1;
1103
1104                        /*
1105                         * Special case for ibm,configure-connector where the
1106                         * address can be 0
1107                         */
1108                        if (!strcmp(f->name, "ibm,configure-connector") &&
1109                            base == 0)
1110                                return false;
1111
1112                        if (!in_rmo_buf(base, end))
1113                                goto err;
1114                }
1115
1116                return false;
1117        }
1118
1119err:
1120        pr_err_ratelimited("sys_rtas: RTAS call blocked - exploit attempt?\n");
1121        pr_err_ratelimited("sys_rtas: token=0x%x, nargs=%d (called by %s)\n",
1122                           token, nargs, current->comm);
1123        return true;
1124}
1125
1126#else
1127
1128static bool block_rtas_call(int token, int nargs,
1129                            struct rtas_args *args)
1130{
1131        return false;
1132}
1133
1134#endif /* CONFIG_PPC_RTAS_FILTER */
1135
1136/* We assume to be passed big endian arguments */
1137SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
1138{
1139        struct rtas_args args;
1140        unsigned long flags;
1141        char *buff_copy, *errbuf = NULL;
1142        int nargs, nret, token;
1143
1144        if (!capable(CAP_SYS_ADMIN))
1145                return -EPERM;
1146
1147        if (!rtas.entry)
1148                return -EINVAL;
1149
1150        if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
1151                return -EFAULT;
1152
1153        nargs = be32_to_cpu(args.nargs);
1154        nret  = be32_to_cpu(args.nret);
1155        token = be32_to_cpu(args.token);
1156
1157        if (nargs >= ARRAY_SIZE(args.args)
1158            || nret > ARRAY_SIZE(args.args)
1159            || nargs + nret > ARRAY_SIZE(args.args))
1160                return -EINVAL;
1161
1162        /* Copy in args. */
1163        if (copy_from_user(args.args, uargs->args,
1164                           nargs * sizeof(rtas_arg_t)) != 0)
1165                return -EFAULT;
1166
1167        if (token == RTAS_UNKNOWN_SERVICE)
1168                return -EINVAL;
1169
1170        args.rets = &args.args[nargs];
1171        memset(args.rets, 0, nret * sizeof(rtas_arg_t));
1172
1173        if (block_rtas_call(token, nargs, &args))
1174                return -EINVAL;
1175
1176        /* Need to handle ibm,suspend_me call specially */
1177        if (token == ibm_suspend_me_token) {
1178
1179                /*
1180                 * rtas_ibm_suspend_me assumes the streamid handle is in cpu
1181                 * endian, or at least the hcall within it requires it.
1182                 */
1183                int rc = 0;
1184                u64 handle = ((u64)be32_to_cpu(args.args[0]) << 32)
1185                              | be32_to_cpu(args.args[1]);
1186                rc = rtas_ibm_suspend_me(handle);
1187                if (rc == -EAGAIN)
1188                        args.rets[0] = cpu_to_be32(RTAS_NOT_SUSPENDABLE);
1189                else if (rc == -EIO)
1190                        args.rets[0] = cpu_to_be32(-1);
1191                else if (rc)
1192                        return rc;
1193                goto copy_return;
1194        }
1195
1196        buff_copy = get_errorlog_buffer();
1197
1198        flags = lock_rtas();
1199
1200        rtas.args = args;
1201        enter_rtas(__pa(&rtas.args));
1202        args = rtas.args;
1203
1204        /* A -1 return code indicates that the last command couldn't
1205           be completed due to a hardware error. */
1206        if (be32_to_cpu(args.rets[0]) == -1)
1207                errbuf = __fetch_rtas_last_error(buff_copy);
1208
1209        unlock_rtas(flags);
1210
1211        if (buff_copy) {
1212                if (errbuf)
1213                        log_error(errbuf, ERR_TYPE_RTAS_LOG, 0);
1214                kfree(buff_copy);
1215        }
1216
1217 copy_return:
1218        /* Copy out args. */
1219        if (copy_to_user(uargs->args + nargs,
1220                         args.args + nargs,
1221                         nret * sizeof(rtas_arg_t)) != 0)
1222                return -EFAULT;
1223
1224        return 0;
1225}
1226
1227/*
1228 * Call early during boot, before mem init, to retrieve the RTAS
1229 * information from the device-tree and allocate the RMO buffer for userland
1230 * accesses.
1231 */
1232void __init rtas_initialize(void)
1233{
1234        unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
1235        u32 base, size, entry;
1236        int no_base, no_size, no_entry;
1237#ifdef CONFIG_PPC_RTAS_FILTER
1238        int i;
1239#endif
1240
1241        /* Get RTAS dev node and fill up our "rtas" structure with infos
1242         * about it.
1243         */
1244        rtas.dev = of_find_node_by_name(NULL, "rtas");
1245        if (!rtas.dev)
1246                return;
1247
1248        no_base = of_property_read_u32(rtas.dev, "linux,rtas-base", &base);
1249        no_size = of_property_read_u32(rtas.dev, "rtas-size", &size);
1250        if (no_base || no_size) {
1251                of_node_put(rtas.dev);
1252                rtas.dev = NULL;
1253                return;
1254        }
1255
1256        rtas.base = base;
1257        rtas.size = size;
1258        no_entry = of_property_read_u32(rtas.dev, "linux,rtas-entry", &entry);
1259        rtas.entry = no_entry ? rtas.base : entry;
1260
1261        /* If RTAS was found, allocate the RMO buffer for it and look for
1262         * the stop-self token if any
1263         */
1264#ifdef CONFIG_PPC64
1265        if (firmware_has_feature(FW_FEATURE_LPAR)) {
1266                rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX);
1267                ibm_suspend_me_token = rtas_token("ibm,suspend-me");
1268        }
1269#endif
1270        rtas_rmo_buf = memblock_phys_alloc_range(RTAS_RMOBUF_MAX, PAGE_SIZE,
1271                                                 0, rtas_region);
1272        if (!rtas_rmo_buf)
1273                panic("ERROR: RTAS: Failed to allocate %lx bytes below %pa\n",
1274                      PAGE_SIZE, &rtas_region);
1275
1276#ifdef CONFIG_RTAS_ERROR_LOGGING
1277        rtas_last_error_token = rtas_token("rtas-last-error");
1278#endif
1279
1280#ifdef CONFIG_PPC_RTAS_FILTER
1281        for (i = 0; i < ARRAY_SIZE(rtas_filters); i++) {
1282                rtas_filters[i].token = rtas_token(rtas_filters[i].name);
1283        }
1284#endif
1285}
1286
1287int __init early_init_dt_scan_rtas(unsigned long node,
1288                const char *uname, int depth, void *data)
1289{
1290        const u32 *basep, *entryp, *sizep;
1291
1292        if (depth != 1 || strcmp(uname, "rtas") != 0)
1293                return 0;
1294
1295        basep  = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
1296        entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
1297        sizep  = of_get_flat_dt_prop(node, "rtas-size", NULL);
1298
1299        if (basep && entryp && sizep) {
1300                rtas.base = *basep;
1301                rtas.entry = *entryp;
1302                rtas.size = *sizep;
1303        }
1304
1305#ifdef CONFIG_UDBG_RTAS_CONSOLE
1306        basep = of_get_flat_dt_prop(node, "put-term-char", NULL);
1307        if (basep)
1308                rtas_putchar_token = *basep;
1309
1310        basep = of_get_flat_dt_prop(node, "get-term-char", NULL);
1311        if (basep)
1312                rtas_getchar_token = *basep;
1313
1314        if (rtas_putchar_token != RTAS_UNKNOWN_SERVICE &&
1315            rtas_getchar_token != RTAS_UNKNOWN_SERVICE)
1316                udbg_init_rtas_console();
1317
1318#endif
1319
1320        /* break now */
1321        return 1;
1322}
1323
1324static arch_spinlock_t timebase_lock;
1325static u64 timebase = 0;
1326
1327void rtas_give_timebase(void)
1328{
1329        unsigned long flags;
1330
1331        local_irq_save(flags);
1332        hard_irq_disable();
1333        arch_spin_lock(&timebase_lock);
1334        rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
1335        timebase = get_tb();
1336        arch_spin_unlock(&timebase_lock);
1337
1338        while (timebase)
1339                barrier();
1340        rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
1341        local_irq_restore(flags);
1342}
1343
1344void rtas_take_timebase(void)
1345{
1346        while (!timebase)
1347                barrier();
1348        arch_spin_lock(&timebase_lock);
1349        set_tb(timebase >> 32, timebase & 0xffffffff);
1350        timebase = 0;
1351        arch_spin_unlock(&timebase_lock);
1352}
1353