// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  64-bit pSeries and RS/6000 setup code.
 *
 *  Copyright (C) 1995  Linus Torvalds
 *  Adapted from 'alpha' version by Gary Thomas
 *  Modified by Cort Dougan (cort@cs.nmt.edu)
 *  Modified by PPC64 Team, IBM Corp
 */

/*
 * bootup setup stuff..
 */

#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/utsname.h>
#include <linux/adb.h>
#include <linux/export.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/of.h>
#include <linux/of_pci.h>
#include <linux/memblock.h>
#include <linux/swiotlb.h>

#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/pmc.h>
#include <asm/xics.h>
#include <asm/xive.h>
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
#include <asm/udbg.h>
#include <asm/smp.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
#include <asm/reg.h>
#include <asm/plpar_wrappers.h>
#include <asm/kexec.h>
#include <asm/isa-bridge.h>
#include <asm/security_features.h>
#include <asm/asm-const.h>
#include <asm/idle.h>
#include <asm/swiotlb.h>
#include <asm/svm.h>
#include <asm/dtl.h>

#include "pseries.h"
#include "../../../../drivers/pci/pci.h"

DEFINE_STATIC_KEY_FALSE(shared_processor);
EXPORT_SYMBOL_GPL(shared_processor);

int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
EXPORT_SYMBOL(CMO_PageSize);

int fwnmi_active;  /* TRUE if an FWNMI handler is present */
int ibm_nmi_interlock_token;

static void pSeries_show_cpuinfo(struct seq_file *m)
{
        struct device_node *root;
        const char *model = "";

        root = of_find_node_by_path("/");
        if (root)
                model = of_get_property(root, "model", NULL);
        seq_printf(m, "machine\t\t: CHRP %s\n", model);
        of_node_put(root);
        if (radix_enabled())
                seq_printf(m, "MMU\t\t: Radix\n");
        else
                seq_printf(m, "MMU\t\t: Hash\n");
}

/* Initialize firmware assisted non-maskable interrupts if
 * the firmware supports this feature.
 */
static void __init fwnmi_init(void)
{
        unsigned long system_reset_addr, machine_check_addr;
        u8 *mce_data_buf;
        unsigned int i;
        int nr_cpus = num_possible_cpus();
#ifdef CONFIG_PPC_BOOK3S_64
        struct slb_entry *slb_ptr;
        size_t size;
#endif
        int ibm_nmi_register_token;

        ibm_nmi_register_token = rtas_token("ibm,nmi-register");
        if (ibm_nmi_register_token == RTAS_UNKNOWN_SERVICE)
                return;

        ibm_nmi_interlock_token = rtas_token("ibm,nmi-interlock");
        if (WARN_ON(ibm_nmi_interlock_token == RTAS_UNKNOWN_SERVICE))
                return;

        /* If the kernel's not linked at zero we point the firmware at low
         * addresses anyway, and use a trampoline to get to the real code. */
        system_reset_addr  = __pa(system_reset_fwnmi) - PHYSICAL_START;
        machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;

        if (0 == rtas_call(ibm_nmi_register_token, 2, 1, NULL,
                           system_reset_addr, machine_check_addr))
                fwnmi_active = 1;

        /*
         * Allocate a chunk for per cpu buffer to hold rtas errorlog.
         * It will be used in real mode mce handler, hence it needs to be
         * below RMA.
         */
        mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus,
                                        RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT,
                                        ppc64_rma_size, NUMA_NO_NODE);
        if (!mce_data_buf)
                panic("Failed to allocate %d bytes below %pa for MCE buffer\n",
                      RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size);

        for_each_possible_cpu(i) {
                paca_ptrs[i]->mce_data_buf = mce_data_buf +
                                                (RTAS_ERROR_LOG_MAX * i);
        }

#ifdef CONFIG_PPC_BOOK3S_64
        if (!radix_enabled()) {
                /* Allocate per cpu area to save old slb contents during MCE */
                size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus;
                slb_ptr = memblock_alloc_try_nid_raw(size,
                                sizeof(struct slb_entry), MEMBLOCK_LOW_LIMIT,
                                ppc64_rma_size, NUMA_NO_NODE);
                if (!slb_ptr)
                        panic("Failed to allocate %zu bytes below %pa for slb area\n",
                              size, &ppc64_rma_size);

                for_each_possible_cpu(i)
                        paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i);
        }
#endif
}

static void pseries_8259_cascade(struct irq_desc *desc)
{
        struct irq_chip *chip = irq_desc_get_chip(desc);
        unsigned int cascade_irq = i8259_irq();

        if (cascade_irq)
                generic_handle_irq(cascade_irq);

        chip->irq_eoi(&desc->irq_data);
}

static void __init pseries_setup_i8259_cascade(void)
{
        struct device_node *np, *old, *found = NULL;
        unsigned int cascade;
        const u32 *addrp;
        unsigned long intack = 0;
        int naddr;

        for_each_node_by_type(np, "interrupt-controller") {
                if (of_device_is_compatible(np, "chrp,iic")) {
                        found = np;
                        break;
                }
        }

        if (found == NULL) {
                printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
                return;
        }

        cascade = irq_of_parse_and_map(found, 0);
        if (!cascade) {
                printk(KERN_ERR "pic: failed to map cascade interrupt");
                return;
        }
        pr_debug("pic: cascade mapped to irq %d\n", cascade);

        for (old = of_node_get(found); old != NULL ; old = np) {
                np = of_get_parent(old);
                of_node_put(old);
                if (np == NULL)
                        break;
                if (!of_node_name_eq(np, "pci"))
                        continue;
                addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
                if (addrp == NULL)
                        continue;
                naddr = of_n_addr_cells(np);
                intack = addrp[naddr-1];
                if (naddr > 1)
                        intack |= ((unsigned long)addrp[naddr-2]) << 32;
        }
        if (intack)
                printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
        i8259_init(found, intack);
        of_node_put(found);
        irq_set_chained_handler(cascade, pseries_8259_cascade);
}

static void __init pseries_init_irq(void)
{
        /* Try using a XIVE if available, otherwise use a XICS */
        if (!xive_spapr_init()) {
                xics_init();
                pseries_setup_i8259_cascade();
        }
}

static void pseries_lpar_enable_pmcs(void)
{
        unsigned long set, reset;

        set = 1UL << 63;
        reset = 0;
        plpar_hcall_norets(H_PERFMON, set, reset);
}

static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
{
        struct of_reconfig_data *rd = data;
        struct device_node *parent, *np = rd->dn;
        struct pci_dn *pdn;
        int err = NOTIFY_OK;

        switch (action) {
        case OF_RECONFIG_ATTACH_NODE:
                parent = of_get_parent(np);
                pdn = parent ? PCI_DN(parent) : NULL;
                if (pdn)
                        pci_add_device_node_info(pdn->phb, np);

                of_node_put(parent);
                break;
        case OF_RECONFIG_DETACH_NODE:
                pdn = PCI_DN(np);
                if (pdn)
                        list_del(&pdn->list);
                break;
        default:
                err = NOTIFY_DONE;
                break;
        }
        return err;
}

static struct notifier_block pci_dn_reconfig_nb = {
        .notifier_call = pci_dn_reconfig_notifier,
};

struct kmem_cache *dtl_cache;

#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
 * Allocate space for the dispatch trace log for all possible cpus
 * and register the buffers with the hypervisor.  This is used for
 * computing time stolen by the hypervisor.
 */
static int alloc_dispatch_logs(void)
{
        if (!firmware_has_feature(FW_FEATURE_SPLPAR))
                return 0;

        if (!dtl_cache)
                return 0;

        alloc_dtl_buffers(0);

        /* Register the DTL for the current (boot) cpu */
        register_dtl_buffer(smp_processor_id());

        return 0;
}
#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static inline int alloc_dispatch_logs(void)
{
        return 0;
}
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */

static int alloc_dispatch_log_kmem_cache(void)
{
        void (*ctor)(void *) = get_dtl_cache_ctor();

        dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
                                                DISPATCH_LOG_BYTES, 0, ctor);
        if (!dtl_cache) {
                pr_warn("Failed to create dispatch trace log buffer cache\n");
                pr_warn("Stolen time statistics will be unreliable\n");
                return 0;
        }

        return alloc_dispatch_logs();
}
machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache);

DEFINE_PER_CPU(u64, idle_spurr_cycles);
DEFINE_PER_CPU(u64, idle_entry_purr_snap);
DEFINE_PER_CPU(u64, idle_entry_spurr_snap);
static void pseries_lpar_idle(void)
{
        /*
         * Default handler to go into low thread priority and possibly
         * low power mode by ceding processor to hypervisor
         */

        if (!prep_irq_for_idle())
                return;

        /* Indicate to hypervisor that we are idle. */
        pseries_idle_prolog();

        /*
         * Yield the processor to the hypervisor.  We return if
         * an external interrupt occurs (which are driven prior
         * to returning here) or if a prod occurs from another
         * processor. When returning here, external interrupts
         * are enabled.
         */
        cede_processor();

        pseries_idle_epilog();
}

/*
 * Enable relocation on during exceptions. This has partition wide scope and
 * may take a while to complete, if it takes longer than one second we will
 * just give up rather than wasting any more time on this - if that turns out
 * to ever be a problem in practice we can move this into a kernel thread to
 * finish off the process later in boot.
 */
bool pseries_enable_reloc_on_exc(void)
{
        long rc;
        unsigned int delay, total_delay = 0;

        while (1) {
                rc = enable_reloc_on_exceptions();
                if (!H_IS_LONG_BUSY(rc)) {
                        if (rc == H_P2) {
                                pr_info("Relocation on exceptions not"
                                        " supported\n");
                                return false;
                        } else if (rc != H_SUCCESS) {
                                pr_warn("Unable to enable relocation"
                                        " on exceptions: %ld\n", rc);
                                return false;
                        }
                        return true;
                }

                delay = get_longbusy_msecs(rc);
                total_delay += delay;
                if (total_delay > 1000) {
                        pr_warn("Warning: Giving up waiting to enable "
                                "relocation on exceptions (%u msec)!\n",
                                total_delay);
                        return false;
                }

                mdelay(delay);
        }
}
EXPORT_SYMBOL(pseries_enable_reloc_on_exc);

void pseries_disable_reloc_on_exc(void)
{
        long rc;

        while (1) {
                rc = disable_reloc_on_exceptions();
                if (!H_IS_LONG_BUSY(rc))
                        break;
                mdelay(get_longbusy_msecs(rc));
        }
        if (rc != H_SUCCESS)
                pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n",
                        rc);
}
EXPORT_SYMBOL(pseries_disable_reloc_on_exc);

#ifdef CONFIG_KEXEC_CORE
static void pSeries_machine_kexec(struct kimage *image)
{
        if (firmware_has_feature(FW_FEATURE_SET_MODE))
                pseries_disable_reloc_on_exc();

        default_machine_kexec(image);
}
#endif

#ifdef __LITTLE_ENDIAN__
void pseries_big_endian_exceptions(void)
{
        long rc;

        while (1) {
                rc = enable_big_endian_exceptions();
                if (!H_IS_LONG_BUSY(rc))
                        break;
                mdelay(get_longbusy_msecs(rc));
        }

        /*
         * At this point it is unlikely panic() will get anything
         * out to the user, since this is called very late in kexec
         * but at least this will stop us from continuing on further
         * and creating an even more difficult to debug situation.
         *
         * There is a known problem when kdump'ing, if cpus are offline
         * the above call will fail. Rather than panicking again, keep
         * going and hope the kdump kernel is also little endian, which
         * it usually is.
         */
        if (rc && !kdump_in_progress())
                panic("Could not enable big endian exceptions");
}

void pseries_little_endian_exceptions(void)
{
        long rc;

        while (1) {
                rc = enable_little_endian_exceptions();
                if (!H_IS_LONG_BUSY(rc))
                        break;
                mdelay(get_longbusy_msecs(rc));
        }
        if (rc) {
                ppc_md.progress("H_SET_MODE LE exception fail", 0);
                panic("Could not enable little endian exceptions");
        }
}
#endif

static void __init find_and_init_phbs(void)
{
        struct device_node *node;
        struct pci_controller *phb;
        struct device_node *root = of_find_node_by_path("/");

        for_each_child_of_node(root, node) {
                if (!of_node_is_type(node, "pci") &&
                    !of_node_is_type(node, "pciex"))
                        continue;

                phb = pcibios_alloc_controller(node);
                if (!phb)
                        continue;
                rtas_setup_phb(phb);
                pci_process_bridge_OF_ranges(phb, node, 0);
                isa_bridge_find_early(phb);
                phb->controller_ops = pseries_pci_controller_ops;
        }

        of_node_put(root);

        /*
         * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
         * in chosen.
         */
        of_pci_check_probe_only();
}

static void init_cpu_char_feature_flags(struct h_cpu_char_result *result)
{
        /*
         * The features below are disabled by default, so we instead look to see
         * if firmware has *enabled* them, and set them if so.
         */
        if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31)
                security_ftr_set(SEC_FTR_SPEC_BAR_ORI31);

        if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED)
                security_ftr_set(SEC_FTR_BCCTRL_SERIALISED);

        if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30)
                security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30);

        if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2)
                security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2);

        if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV)
                security_ftr_set(SEC_FTR_L1D_THREAD_PRIV);

        if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED)
                security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED);

        if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST)
                security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST);

        if (result->character & H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST)
                security_ftr_set(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST);

        if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE)
                security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE);

        if (result->behaviour & H_CPU_BEHAV_FLUSH_LINK_STACK)
                security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);

        /*
         * The features below are enabled by default, so we instead look to see
         * if firmware has *disabled* them, and clear them if so.
         */
        if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY))
                security_ftr_clear(SEC_FTR_FAVOUR_SECURITY);

        if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR))
                security_ftr_clear(SEC_FTR_L1D_FLUSH_PR);

        if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR))
                security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR);
}

void pseries_setup_security_mitigations(void)
{
        struct h_cpu_char_result result;
        enum l1d_flush_type types;
        bool enable;
        long rc;

        /*
         * Set features to the defaults assumed by init_cpu_char_feature_flags()
         * so it can set/clear again any features that might have changed after
         * migration, and in case the hypercall fails and it is not even called.
         */
        powerpc_security_features = SEC_FTR_DEFAULT;

        rc = plpar_get_cpu_characteristics(&result);
        if (rc == H_SUCCESS)
                init_cpu_char_feature_flags(&result);

        /*
         * We're the guest so this doesn't apply to us, clear it to simplify
         * handling of it elsewhere.
         */
        security_ftr_clear(SEC_FTR_L1D_FLUSH_HV);

        types = L1D_FLUSH_FALLBACK;

        if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2))
                types |= L1D_FLUSH_MTTRIG;

        if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30))
                types |= L1D_FLUSH_ORI;

        enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
                 security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR);

        setup_rfi_flush(types, enable);
        setup_count_cache_flush();

        enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
                 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
        setup_entry_flush(enable);

        enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
                 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
        setup_uaccess_flush(enable);

        setup_stf_barrier();
}

#ifdef CONFIG_PCI_IOV
enum rtas_iov_fw_value_map {
        NUM_RES_PROPERTY  = 0, /* Number of Resources */
        LOW_INT           = 1, /* Lowest 32 bits of Address */
        START_OF_ENTRIES  = 2, /* Always start of entry */
        APERTURE_PROPERTY = 2, /* Start of entry+ to  Aperture Size */
        WDW_SIZE_PROPERTY = 4, /* Start of entry+ to Window Size */
        NEXT_ENTRY        = 7  /* Go to next entry on array */
};

enum get_iov_fw_value_index {
        BAR_ADDRS     = 1,    /*  Get Bar Address */
        APERTURE_SIZE = 2,    /*  Get Aperture Size */
        WDW_SIZE      = 3     /*  Get Window Size */
};

resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
                                         enum get_iov_fw_value_index value)
{
        const int *indexes;
        struct device_node *dn = pci_device_to_OF_node(dev);
        int i, num_res, ret = 0;

        indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
        if (!indexes)
                return  0;

        /*
         * First element in the array is the number of Bars
         * returned.  Search through the list to find the matching
         * bar
         */
        num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
        if (resno >= num_res)
                return 0; /* or an errror */

        i = START_OF_ENTRIES + NEXT_ENTRY * resno;
        switch (value) {
        case BAR_ADDRS:
                ret = of_read_number(&indexes[i], 2);
                break;
        case APERTURE_SIZE:
                ret = of_read_number(&indexes[i + APERTURE_PROPERTY], 2);
                break;
        case WDW_SIZE:
                ret = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2);
                break;
        }

        return ret;
}

void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
{
        struct resource *res;
        resource_size_t base, size;
        int i, r, num_res;

        num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
        num_res = min_t(int, num_res, PCI_SRIOV_NUM_BARS);
        for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS;
             i += NEXT_ENTRY, r++) {
                res = &dev->resource[r + PCI_IOV_RESOURCES];
                base = of_read_number(&indexes[i], 2);
                size = of_read_number(&indexes[i + APERTURE_PROPERTY], 2);
                res->flags = pci_parse_of_flags(of_read_number
                                                (&indexes[i + LOW_INT], 1), 0);
                res->flags |= (IORESOURCE_MEM_64 | IORESOURCE_PCI_FIXED);
                res->name = pci_name(dev);
                res->start = base;
                res->end = base + size - 1;
        }
}

void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
{
        struct resource *res, *root, *conflict;
        resource_size_t base, size;
        int i, r, num_res;

        /*
         * First element in the array is the number of Bars
         * returned.  Search through the list to find the matching
         * bars assign them from firmware into resources structure.
         */
        num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
        for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS;
             i += NEXT_ENTRY, r++) {
                res = &dev->resource[r + PCI_IOV_RESOURCES];
                base = of_read_number(&indexes[i], 2);
                size = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2);
                res->name = pci_name(dev);
                res->start = base;
                res->end = base + size - 1;
                root = &iomem_resource;
                dev_dbg(&dev->dev,
                        "pSeries IOV BAR %d: trying firmware assignment %pR\n",
                         r + PCI_IOV_RESOURCES, res);
                conflict = request_resource_conflict(root, res);
                if (conflict) {
                        dev_info(&dev->dev,
                                 "BAR %d: %pR conflicts with %s %pR\n",
                                 r + PCI_IOV_RESOURCES, res,
                                 conflict->name, conflict);
                        res->flags |= IORESOURCE_UNSET;
                }
        }
}

static void pseries_disable_sriov_resources(struct pci_dev *pdev)
{
        int i;

        pci_warn(pdev, "No hypervisor support for SR-IOV on this device, IOV BARs disabled.\n");
        for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
                pdev->resource[i + PCI_IOV_RESOURCES].flags = 0;
}

static void pseries_pci_fixup_resources(struct pci_dev *pdev)
{
        const int *indexes;
        struct device_node *dn = pci_device_to_OF_node(pdev);

        /*Firmware must support open sriov otherwise dont configure*/
        indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
        if (indexes)
                of_pci_set_vf_bar_size(pdev, indexes);
        else
                pseries_disable_sriov_resources(pdev);
}

static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev)
{
        const int *indexes;
        struct device_node *dn = pci_device_to_OF_node(pdev);

        if (!pdev->is_physfn || pci_dev_is_added(pdev))
                return;
        /*Firmware must support open sriov otherwise dont configure*/
        indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
        if (indexes)
                of_pci_parse_iov_addrs(pdev, indexes);
        else
                pseries_disable_sriov_resources(pdev);
}

static resource_size_t pseries_pci_iov_resource_alignment(struct pci_dev *pdev,
                                                          int resno)
{
        const __be32 *reg;
        struct device_node *dn = pci_device_to_OF_node(pdev);

        /*Firmware must support open sriov otherwise report regular alignment*/
        reg = of_get_property(dn, "ibm,is-open-sriov-pf", NULL);
        if (!reg)
                return pci_iov_resource_size(pdev, resno);

        if (!pdev->is_physfn)
                return 0;
        return pseries_get_iov_fw_value(pdev,
                                        resno - PCI_IOV_RESOURCES,
                                        APERTURE_SIZE);
}
#endif

static void __init pSeries_setup_arch(void)
{
        set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);

        /* Discover PIC type and setup ppc_md accordingly */
        smp_init_pseries();


        if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE))
                if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE))
                        panic("BUG: Radix support requires either GTSE or RPT_INVALIDATE\n");


        /* openpic global configuration register (64-bit format). */
        /* openpic Interrupt Source Unit pointer (64-bit format). */
        /* python0 facility area (mmio) (64-bit format) REAL address. */

        /* init to some ~sane value until calibrate_delay() runs */
        loops_per_jiffy = 50000000;

        fwnmi_init();

        pseries_setup_security_mitigations();
        pseries_lpar_read_hblkrm_characteristics();

        /* By default, only probe PCI (can be overridden by rtas_pci) */
        pci_add_flags(PCI_PROBE_ONLY);

        /* Find and initialize PCI host bridges */
        init_pci_config_tokens();
        find_and_init_phbs();
        of_reconfig_notifier_register(&pci_dn_reconfig_nb);

        pSeries_nvram_init();

        if (firmware_has_feature(FW_FEATURE_LPAR)) {
                vpa_init(boot_cpuid);

                if (lppaca_shared_proc(get_lppaca())) {
                        static_branch_enable(&shared_processor);
                        pv_spinlocks_init();
                }

                ppc_md.power_save = pseries_lpar_idle;
                ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
#ifdef CONFIG_PCI_IOV
                ppc_md.pcibios_fixup_resources =
                        pseries_pci_fixup_resources;
                ppc_md.pcibios_fixup_sriov =
                        pseries_pci_fixup_iov_resources;
                ppc_md.pcibios_iov_resource_alignment =
                        pseries_pci_iov_resource_alignment;
#endif
        } else {
                /* No special idle routine */
                ppc_md.enable_pmcs = power4_enable_pmcs;
        }

        ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;

        if (swiotlb_force == SWIOTLB_FORCE)
                ppc_swiotlb_enable = 1;
}

static void pseries_panic(char *str)
{
        panic_flush_kmsg_end();
        rtas_os_term(str);
}

static int __init pSeries_init_panel(void)
{
        /* Manually leave the kernel version on the panel. */
#ifdef __BIG_ENDIAN__
        ppc_md.progress("Linux ppc64\n", 0);
#else
        ppc_md.progress("Linux ppc64le\n", 0);
#endif
        ppc_md.progress(init_utsname()->version, 0);

        return 0;
}
machine_arch_initcall(pseries, pSeries_init_panel);

static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
{
        return plpar_hcall_norets(H_SET_DABR, dabr);
}

static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
{
        /* Have to set at least one bit in the DABRX according to PAPR */
        if (dabrx == 0 && dabr == 0)
                dabrx = DABRX_USER;
        /* PAPR says we can only set kernel and user bits */
        dabrx &= DABRX_KERNEL | DABRX_USER;

        return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
}

static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
{
        /* PAPR says we can't set HYP */
        dawrx &= ~DAWRX_HYP;

        if (nr == 0)
                return plpar_set_watchpoint0(dawr, dawrx);
        else
                return plpar_set_watchpoint1(dawr, dawrx);
}

#define CMO_CHARACTERISTICS_TOKEN 44
#define CMO_MAXLENGTH 1026

void pSeries_coalesce_init(void)
{
        struct hvcall_mpp_x_data mpp_x_data;

        if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
                powerpc_firmware_features |= FW_FEATURE_XCMO;
        else
                powerpc_firmware_features &= ~FW_FEATURE_XCMO;
}

/**
 * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
 * handle that here. (Stolen from parse_system_parameter_string)
 */
static void pSeries_cmo_feature_init(void)
{
        char *ptr, *key, *value, *end;
        int call_status;
        int page_order = IOMMU_PAGE_SHIFT_4K;

        pr_debug(" -> fw_cmo_feature_init()\n");
        spin_lock(&rtas_data_buf_lock);
        memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
        call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
                                NULL,
                                CMO_CHARACTERISTICS_TOKEN,
                                __pa(rtas_data_buf),
                                RTAS_DATA_BUF_SIZE);

        if (call_status != 0) {
                spin_unlock(&rtas_data_buf_lock);
                pr_debug("CMO not available\n");
                pr_debug(" <- fw_cmo_feature_init()\n");
                return;
        }

        end = rtas_data_buf + CMO_MAXLENGTH - 2;
        ptr = rtas_data_buf + 2;        /* step over strlen value */
        key = value = ptr;

        while (*ptr && (ptr <= end)) {
                /* Separate the key and value by replacing '=' with '\0' and
                 * point the value at the string after the '='
                 */
                if (ptr[0] == '=') {
                        ptr[0] = '\0';
                        value = ptr + 1;
                } else if (ptr[0] == '\0' || ptr[0] == ',') {
                        /* Terminate the string containing the key/value pair */
                        ptr[0] = '\0';

                        if (key == value) {
                                pr_debug("Malformed key/value pair\n");
                                /* Never found a '=', end processing */
                                break;
                        }

                        if (0 == strcmp(key, "CMOPageSize"))
                                page_order = simple_strtol(value, NULL, 10);
                        else if (0 == strcmp(key, "PrPSP"))
                                CMO_PrPSP = simple_strtol(value, NULL, 10);
                        else if (0 == strcmp(key, "SecPSP"))
                                CMO_SecPSP = simple_strtol(value, NULL, 10);
                        value = key = ptr + 1;
                }
                ptr++;
        }

        /* Page size is returned as the power of 2 of the page size,
         * convert to the page size in bytes before returning
         */
        CMO_PageSize = 1 << page_order;
        pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);

        if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
                pr_info("CMO enabled\n");
                pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
                         CMO_SecPSP);
                powerpc_firmware_features |= FW_FEATURE_CMO;
                pSeries_coalesce_init();
        } else
                pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
                         CMO_SecPSP);
        spin_unlock(&rtas_data_buf_lock);
        pr_debug(" <- fw_cmo_feature_init()\n");
}

/*
 * Early initialization.  Relocation is on but do not reference unbolted pages
 */
static void __init pseries_init(void)
{
        pr_debug(" -> pseries_init()\n");

#ifdef CONFIG_HVC_CONSOLE
        if (firmware_has_feature(FW_FEATURE_LPAR))
                hvc_vio_init_early();
#endif
        if (firmware_has_feature(FW_FEATURE_XDABR))
                ppc_md.set_dabr = pseries_set_xdabr;
        else if (firmware_has_feature(FW_FEATURE_DABR))
                ppc_md.set_dabr = pseries_set_dabr;

        if (firmware_has_feature(FW_FEATURE_SET_MODE))
                ppc_md.set_dawr = pseries_set_dawr;

        pSeries_cmo_feature_init();
        iommu_init_early_pSeries();

        pr_debug(" <- pseries_init()\n");
}

/**
 * pseries_power_off - tell firmware about how to power off the system.
 *
 * This function calls either the power-off rtas token in normal cases
 * or the ibm,power-off-ups token (if present & requested) in case of
 * a power failure. If power-off token is used, power on will only be
 * possible with power button press. If ibm,power-off-ups token is used
 * it will allow auto poweron after power is restored.
 */
static void pseries_power_off(void)
{
        int rc;
        int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");

        if (rtas_flash_term_hook)
                rtas_flash_term_hook(SYS_POWER_OFF);

        if (rtas_poweron_auto == 0 ||
                rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
                rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
                printk(KERN_INFO "RTAS power-off returned %d\n", rc);
        } else {
                rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
                printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
        }
        for (;;);
}

static int __init pSeries_probe(void)
{
        if (!of_node_is_type(of_root, "chrp"))
                return 0;

        /* Cell blades firmware claims to be chrp while it's not. Until this
         * is fixed, we need to avoid those here.
         */
        if (of_machine_is_compatible("IBM,CPBW-1.0") ||
            of_machine_is_compatible("IBM,CBEA"))
                return 0;

        pm_power_off = pseries_power_off;

        pr_debug("Machine is%s LPAR !\n",
                 (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");

        pseries_init();

        return 1;
}

static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
        if (firmware_has_feature(FW_FEATURE_LPAR))
                return PCI_PROBE_DEVTREE;
        return PCI_PROBE_NORMAL;
}

struct pci_controller_ops pseries_pci_controller_ops = {
        .probe_mode             = pSeries_pci_probe_mode,
};

define_machine(pseries) {
        .name                   = "pSeries",
        .probe                  = pSeries_probe,
        .setup_arch             = pSeries_setup_arch,
        .init_IRQ               = pseries_init_irq,
        .show_cpuinfo           = pSeries_show_cpuinfo,
        .log_error              = pSeries_log_error,
        .pcibios_fixup          = pSeries_final_fixup,
        .restart                = rtas_restart,
        .halt                   = rtas_halt,
        .panic                  = pseries_panic,
        .get_boot_time          = rtas_get_boot_time,
        .get_rtc_time           = rtas_get_rtc_time,
        .set_rtc_time           = rtas_set_rtc_time,
        .calibrate_decr         = generic_calibrate_decr,
        .progress               = rtas_progress,
        .system_reset_exception = pSeries_system_reset_exception,
        .machine_check_early    = pseries_machine_check_realmode,
        .machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC_CORE
        .machine_kexec          = pSeries_machine_kexec,
        .kexec_cpu_down         = pseries_kexec_cpu_down,
#endif
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
        .memory_block_size      = pseries_memory_block_size,
#endif
};