1
2
3menuconfig MACINTOSH_DRIVERS
4 bool "Macintosh device drivers"
5 depends on PPC || MAC || X86
6 default y if (PPC_PMAC || MAC)
7 help
8 Say Y here to get to see options for devices used with Macintosh
9 computers. This option alone does not add any kernel code.
10
11 If you say N, all options in this submenu will be skipped and disabled.
12
13if MACINTOSH_DRIVERS
14
15config ADB
16 bool "Apple Desktop Bus (ADB) support"
17 depends on MAC || (PPC_PMAC && PPC32)
18 help
19 Apple Desktop Bus (ADB) support is for support of devices which
20 are connected to an ADB port. ADB devices tend to have 4 pins.
21 If you have an Apple Macintosh prior to the iMac, an iBook or
22 PowerBook, or a "Blue and White G3", you probably want to say Y
23 here. Otherwise say N.
24
25config ADB_MACII
26 bool "Include Mac II ADB driver"
27 depends on ADB && MAC
28 help
29 Say Y here if want your kernel to support Macintosh systems that use
30 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
31 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
32 Centris 650.
33
34config ADB_IOP
35 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
36 depends on ADB && MAC
37 help
38 The I/O Processor (IOP) is an Apple custom IC designed to provide
39 intelligent support for I/O controllers. It is described at
40 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
41 support for it, say 'Y' here.
42
43
44config ADB_CUDA
45 bool "Support for Cuda/Egret based Macs and PowerMacs"
46 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
47 help
48 This provides support for Cuda/Egret based Macintosh and
49 Power Macintosh systems. This includes most m68k based Macs,
50 most Old World PowerMacs, the first generation iMacs, the
51 Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later
52 models should use CONFIG_ADB_PMU instead. It is safe to say Y
53 here even if your machine doesn't have a Cuda or Egret device.
54
55 If unsure say Y.
56
57config ADB_PMU
58 bool "Support for PMU based PowerMacs and PowerBooks"
59 depends on PPC_PMAC || MAC
60 help
61 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
62 PMU is an embedded microprocessor whose primary function is to
63 control system power, and battery charging on the portable models.
64 The PMU also controls the ADB (Apple Desktop Bus) which connects to
65 the keyboard and mouse on some machines, as well as the non-volatile
66 RAM and the RTC (real time clock) chip. Say Y to enable support for
67 this device; you should do so if your machine is one of those
68 mentioned above.
69
70config ADB_PMU_LED
71 bool "Support for the Power/iBook front LED"
72 depends on PPC_PMAC && ADB_PMU
73 select NEW_LEDS
74 select LEDS_CLASS
75 help
76 Support the front LED on Power/iBooks as a generic LED that can
77 be triggered by any of the supported triggers. To get the
78 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
79 and the disk LED trigger and configure appropriately through sysfs.
80
81config ADB_PMU_LED_DISK
82 bool "Use front LED as DISK LED by default"
83 depends on ADB_PMU_LED
84 depends on LEDS_CLASS
85 select LEDS_TRIGGERS
86 select LEDS_TRIGGER_DISK
87 help
88 This option makes the front LED default to the disk trigger
89 so that it blinks on disk activity.
90
91config PMAC_SMU
92 bool "Support for SMU based PowerMacs"
93 depends on PPC_PMAC64
94 help
95 This option adds support for the newer G5 iMacs and PowerMacs based
96 on the "SMU" system control chip which replaces the old PMU.
97 If you don't know, say Y.
98
99config PMAC_APM_EMU
100 tristate "APM emulation"
101 select APM_EMULATION
102 depends on ADB_PMU && PM && PPC32
103
104config PMAC_MEDIABAY
105 bool "Support PowerBook hotswap media bay"
106 depends on PPC_PMAC && PPC32 && BLOCK
107 help
108 This option adds support for older PowerBook's hotswap media bay
109 that can contains batteries, floppy drives, or IDE devices. PCI
110 devices are not fully supported in the bay as I never had one to
111 try with
112
113config PMAC_BACKLIGHT
114 bool "Backlight control for LCD screens"
115 depends on PPC_PMAC && ADB_PMU && FB = y && (BROKEN || !PPC64)
116 select FB_BACKLIGHT
117 help
118 Say Y here to enable Macintosh specific extensions of the generic
119 backlight code. With this enabled, the brightness keys on older
120 PowerBooks will be enabled so you can change the screen brightness.
121 Newer models should use a userspace daemon like pbbuttonsd.
122
123config PMAC_BACKLIGHT_LEGACY
124 bool "Provide legacy ioctl's on /dev/pmu for the backlight"
125 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
126 help
127 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
128 programs which use this old interface. New and updated programs
129 should use the backlight classes in sysfs.
130
131config ADB_MACIO
132 bool "Include MacIO (CHRP) ADB driver"
133 depends on ADB && PPC_CHRP && !PPC_PMAC64
134 help
135 Say Y here to include direct support for the ADB controller in the
136 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
137 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
138 OpenPIC controller and two RS422/Geoports.)
139
140config INPUT_ADBHID
141 bool "Support for ADB input devices (keyboard, mice, ...)"
142 depends on ADB && INPUT=y
143 help
144 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
145 such as keyboards, mice, joysticks, trackpads or graphic tablets
146 handled by the input layer. If you say Y here, make sure to say Y to
147 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
148 "Event interface support" (CONFIG_INPUT_EVDEV) as well.
149
150 If unsure, say Y.
151
152config MAC_EMUMOUSEBTN
153 tristate "Support for mouse button 2+3 emulation"
154 depends on SYSCTL && INPUT
155 help
156 This provides generic support for emulating the 2nd and 3rd mouse
157 button with keypresses. If you say Y here, the emulation is still
158 disabled by default. The emulation is controlled by these sysctl
159 entries:
160 /proc/sys/dev/mac_hid/mouse_button_emulation
161 /proc/sys/dev/mac_hid/mouse_button2_keycode
162 /proc/sys/dev/mac_hid/mouse_button3_keycode
163
164 If you have an Apple machine with a 1-button mouse, say Y here.
165
166 To compile this driver as a module, choose M here: the
167 module will be called mac_hid.
168
169config THERM_WINDTUNNEL
170 tristate "Support for thermal management on Windtunnel G4s"
171 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
172 help
173 This driver provides some thermostat and fan control for the desktop
174 G4 "Windtunnel"
175
176config THERM_ADT746X
177 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
178 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
179 help
180 This driver provides some thermostat and fan control for the
181 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
182 better fan behaviour by default, and some manual control.
183
184config WINDFARM
185 tristate "New PowerMac thermal control infrastructure"
186 depends on PPC
187
188config WINDFARM_PM81
189 tristate "Support for thermal management on iMac G5"
190 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
191 select I2C_POWERMAC
192 help
193 This driver provides thermal control for the iMacG5
194
195config WINDFARM_PM72
196 tristate "Support for thermal management on PowerMac G5 (AGP)"
197 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
198 select I2C_POWERMAC
199 help
200 This driver provides thermal control for the PowerMac G5
201 "AGP" variants (PowerMac 7,2 and 7,3)
202
203config WINDFARM_RM31
204 tristate "Support for thermal management on Xserve G5"
205 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
206 select I2C_POWERMAC
207 help
208 This driver provides thermal control for the Xserve G5
209 (RackMac3,1)
210
211config WINDFARM_PM91
212 tristate "Support for thermal management on PowerMac9,1"
213 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
214 select I2C_POWERMAC
215 help
216 This driver provides thermal control for the PowerMac9,1
217 which is the recent (SMU based) single CPU desktop G5
218
219config WINDFARM_PM112
220 tristate "Support for thermal management on PowerMac11,2"
221 depends on WINDFARM && I2C && PMAC_SMU
222 select I2C_POWERMAC
223 help
224 This driver provides thermal control for the PowerMac11,2
225 which are the recent dual and quad G5 machines using the
226 970MP dual-core processor.
227
228config WINDFARM_PM121
229 tristate "Support for thermal management on PowerMac12,1"
230 depends on WINDFARM && I2C && PMAC_SMU
231 select I2C_POWERMAC
232 help
233 This driver provides thermal control for the PowerMac12,1
234 which is the iMac G5 (iSight).
235
236config ANSLCD
237 tristate "Support for ANS LCD display"
238 depends on ADB_CUDA && PPC_PMAC
239
240config PMAC_RACKMETER
241 tristate "Support for Apple XServe front panel LEDs"
242 depends on PPC_PMAC
243 help
244 This driver provides some support to control the front panel
245 blue LEDs "vu-meter" of the XServer macs.
246
247config SENSORS_AMS
248 tristate "Apple Motion Sensor driver"
249 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
250 help
251 Support for the motion sensor included in PowerBooks. Includes
252 implementations for PMU and I2C.
253
254 This driver can also be built as a module. If so, the module
255 will be called ams.
256
257config SENSORS_AMS_PMU
258 bool "PMU variant"
259 depends on SENSORS_AMS && ADB_PMU
260 default y
261 help
262 PMU variant of motion sensor, found in late 2005 PowerBooks.
263
264config SENSORS_AMS_I2C
265 bool "I2C variant"
266 depends on SENSORS_AMS && I2C
267 default y
268 help
269 I2C variant of motion sensor, found in early 2005 PowerBooks and
270 iBooks.
271
272endif
273
