linux/drivers/power/supply/twl4030_charger.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
   4 *
   5 * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com>
   6 *
   7 * based on twl4030_bci_battery.c by TI
   8 * Copyright (C) 2008 Texas Instruments, Inc.
   9 */
  10
  11#include <linux/init.h>
  12#include <linux/module.h>
  13#include <linux/slab.h>
  14#include <linux/err.h>
  15#include <linux/platform_device.h>
  16#include <linux/interrupt.h>
  17#include <linux/mfd/twl.h>
  18#include <linux/power_supply.h>
  19#include <linux/notifier.h>
  20#include <linux/usb/otg.h>
  21#include <linux/iio/consumer.h>
  22
  23#define TWL4030_BCIMDEN         0x00
  24#define TWL4030_BCIMDKEY        0x01
  25#define TWL4030_BCIMSTATEC      0x02
  26#define TWL4030_BCIICHG         0x08
  27#define TWL4030_BCIVAC          0x0a
  28#define TWL4030_BCIVBUS         0x0c
  29#define TWL4030_BCIMFSTS3       0x0F
  30#define TWL4030_BCIMFSTS4       0x10
  31#define TWL4030_BCICTL1         0x23
  32#define TWL4030_BB_CFG          0x12
  33#define TWL4030_BCIIREF1        0x27
  34#define TWL4030_BCIIREF2        0x28
  35#define TWL4030_BCIMFKEY        0x11
  36#define TWL4030_BCIMFEN3        0x14
  37#define TWL4030_BCIMFTH8        0x1d
  38#define TWL4030_BCIMFTH9        0x1e
  39#define TWL4030_BCIWDKEY        0x21
  40
  41#define TWL4030_BCIMFSTS1       0x01
  42
  43#define TWL4030_BCIAUTOWEN      BIT(5)
  44#define TWL4030_CONFIG_DONE     BIT(4)
  45#define TWL4030_CVENAC          BIT(2)
  46#define TWL4030_BCIAUTOUSB      BIT(1)
  47#define TWL4030_BCIAUTOAC       BIT(0)
  48#define TWL4030_CGAIN           BIT(5)
  49#define TWL4030_USBFASTMCHG     BIT(2)
  50#define TWL4030_STS_VBUS        BIT(7)
  51#define TWL4030_STS_USB_ID      BIT(2)
  52#define TWL4030_BBCHEN          BIT(4)
  53#define TWL4030_BBSEL_MASK      0x0c
  54#define TWL4030_BBSEL_2V5       0x00
  55#define TWL4030_BBSEL_3V0       0x04
  56#define TWL4030_BBSEL_3V1       0x08
  57#define TWL4030_BBSEL_3V2       0x0c
  58#define TWL4030_BBISEL_MASK     0x03
  59#define TWL4030_BBISEL_25uA     0x00
  60#define TWL4030_BBISEL_150uA    0x01
  61#define TWL4030_BBISEL_500uA    0x02
  62#define TWL4030_BBISEL_1000uA   0x03
  63
  64#define TWL4030_BATSTSPCHG      BIT(2)
  65#define TWL4030_BATSTSMCHG      BIT(6)
  66
  67/* BCI interrupts */
  68#define TWL4030_WOVF            BIT(0) /* Watchdog overflow */
  69#define TWL4030_TMOVF           BIT(1) /* Timer overflow */
  70#define TWL4030_ICHGHIGH        BIT(2) /* Battery charge current high */
  71#define TWL4030_ICHGLOW         BIT(3) /* Battery cc. low / FSM state change */
  72#define TWL4030_ICHGEOC         BIT(4) /* Battery current end-of-charge */
  73#define TWL4030_TBATOR2         BIT(5) /* Battery temperature out of range 2 */
  74#define TWL4030_TBATOR1         BIT(6) /* Battery temperature out of range 1 */
  75#define TWL4030_BATSTS          BIT(7) /* Battery status */
  76
  77#define TWL4030_VBATLVL         BIT(0) /* VBAT level */
  78#define TWL4030_VBATOV          BIT(1) /* VBAT overvoltage */
  79#define TWL4030_VBUSOV          BIT(2) /* VBUS overvoltage */
  80#define TWL4030_ACCHGOV         BIT(3) /* Ac charger overvoltage */
  81
  82#define TWL4030_MSTATEC_USB             BIT(4)
  83#define TWL4030_MSTATEC_AC              BIT(5)
  84#define TWL4030_MSTATEC_MASK            0x0f
  85#define TWL4030_MSTATEC_QUICK1          0x02
  86#define TWL4030_MSTATEC_QUICK7          0x07
  87#define TWL4030_MSTATEC_COMPLETE1       0x0b
  88#define TWL4030_MSTATEC_COMPLETE4       0x0e
  89
  90/*
  91 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
  92 * then AC is available.
  93 */
  94static inline int ac_available(struct iio_channel *channel_vac)
  95{
  96        int val, err;
  97
  98        if (!channel_vac)
  99                return 0;
 100
 101        err = iio_read_channel_processed(channel_vac, &val);
 102        if (err < 0)
 103                return 0;
 104        return val > 4500;
 105}
 106
 107static bool allow_usb;
 108module_param(allow_usb, bool, 0644);
 109MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
 110
 111struct twl4030_bci {
 112        struct device           *dev;
 113        struct power_supply     *ac;
 114        struct power_supply     *usb;
 115        struct usb_phy          *transceiver;
 116        struct notifier_block   usb_nb;
 117        struct work_struct      work;
 118        int                     irq_chg;
 119        int                     irq_bci;
 120        int                     usb_enabled;
 121
 122        /*
 123         * ichg_* and *_cur values in uA. If any are 'large', we set
 124         * CGAIN to '1' which doubles the range for half the
 125         * precision.
 126         */
 127        unsigned int            ichg_eoc, ichg_lo, ichg_hi;
 128        unsigned int            usb_cur, ac_cur;
 129        struct iio_channel      *channel_vac;
 130        bool                    ac_is_active;
 131        int                     usb_mode, ac_mode; /* charging mode requested */
 132#define CHARGE_OFF      0
 133#define CHARGE_AUTO     1
 134#define CHARGE_LINEAR   2
 135
 136        /* When setting the USB current we slowly increase the
 137         * requested current until target is reached or the voltage
 138         * drops below 4.75V.  In the latter case we step back one
 139         * step.
 140         */
 141        unsigned int            usb_cur_target;
 142        struct delayed_work     current_worker;
 143#define USB_CUR_STEP    20000   /* 20mA at a time */
 144#define USB_MIN_VOLT    4750000 /* 4.75V */
 145#define USB_CUR_DELAY   msecs_to_jiffies(100)
 146#define USB_MAX_CURRENT 1700000 /* TWL4030 caps at 1.7A */
 147
 148        unsigned long           event;
 149};
 150
 151/* strings for 'usb_mode' values */
 152static const char *modes[] = { "off", "auto", "continuous" };
 153
 154/*
 155 * clear and set bits on an given register on a given module
 156 */
 157static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg)
 158{
 159        u8 val = 0;
 160        int ret;
 161
 162        ret = twl_i2c_read_u8(mod_no, &val, reg);
 163        if (ret)
 164                return ret;
 165
 166        val &= ~clear;
 167        val |= set;
 168
 169        return twl_i2c_write_u8(mod_no, val, reg);
 170}
 171
 172static int twl4030_bci_read(u8 reg, u8 *val)
 173{
 174        return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg);
 175}
 176
 177static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
 178{
 179        return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear,
 180                        TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
 181                        TWL4030_PM_MASTER_BOOT_BCI);
 182}
 183
 184static int twl4030bci_read_adc_val(u8 reg)
 185{
 186        int ret, temp;
 187        u8 val;
 188
 189        /* read MSB */
 190        ret = twl4030_bci_read(reg + 1, &val);
 191        if (ret)
 192                return ret;
 193
 194        temp = (int)(val & 0x03) << 8;
 195
 196        /* read LSB */
 197        ret = twl4030_bci_read(reg, &val);
 198        if (ret)
 199                return ret;
 200
 201        return temp | val;
 202}
 203
 204/*
 205 * TI provided formulas:
 206 * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
 207 * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
 208 * Here we use integer approximation of:
 209 * CGAIN == 0: val * 1.6618 - 0.85 * 1000
 210 * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
 211 */
 212/*
 213 * convert twl register value for currents into uA
 214 */
 215static int regval2ua(int regval, bool cgain)
 216{
 217        if (cgain)
 218                return (regval * 16618 - 8500 * 1000) / 5;
 219        else
 220                return (regval * 16618 - 8500 * 1000) / 10;
 221}
 222
 223/*
 224 * convert uA currents into twl register value
 225 */
 226static int ua2regval(int ua, bool cgain)
 227{
 228        int ret;
 229        if (cgain)
 230                ua /= 2;
 231        ret = (ua * 10 + 8500 * 1000) / 16618;
 232        /* rounding problems */
 233        if (ret < 512)
 234                ret = 512;
 235        return ret;
 236}
 237
 238static int twl4030_charger_update_current(struct twl4030_bci *bci)
 239{
 240        int status;
 241        int cur;
 242        unsigned reg, cur_reg;
 243        u8 bcictl1, oldreg, fullreg;
 244        bool cgain = false;
 245        u8 boot_bci;
 246
 247        /*
 248         * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
 249         * and AC is enabled, set current for 'ac'
 250         */
 251        if (ac_available(bci->channel_vac)) {
 252                cur = bci->ac_cur;
 253                bci->ac_is_active = true;
 254        } else {
 255                cur = bci->usb_cur;
 256                bci->ac_is_active = false;
 257                if (cur > bci->usb_cur_target) {
 258                        cur = bci->usb_cur_target;
 259                        bci->usb_cur = cur;
 260                }
 261                if (cur < bci->usb_cur_target)
 262                        schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
 263        }
 264
 265        /* First, check thresholds and see if cgain is needed */
 266        if (bci->ichg_eoc >= 200000)
 267                cgain = true;
 268        if (bci->ichg_lo >= 400000)
 269                cgain = true;
 270        if (bci->ichg_hi >= 820000)
 271                cgain = true;
 272        if (cur > 852000)
 273                cgain = true;
 274
 275        status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
 276        if (status < 0)
 277                return status;
 278        if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
 279                            TWL4030_PM_MASTER_BOOT_BCI) < 0)
 280                boot_bci = 0;
 281        boot_bci &= 7;
 282
 283        if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
 284                /* Need to turn for charging while we change the
 285                 * CGAIN bit.  Leave it off while everything is
 286                 * updated.
 287                 */
 288                twl4030_clear_set_boot_bci(boot_bci, 0);
 289
 290        /*
 291         * For ichg_eoc, the hardware only supports reg values matching
 292         * 100XXXX000, and requires the XXXX be stored in the high nibble
 293         * of TWL4030_BCIMFTH8.
 294         */
 295        reg = ua2regval(bci->ichg_eoc, cgain);
 296        if (reg > 0x278)
 297                reg = 0x278;
 298        if (reg < 0x200)
 299                reg = 0x200;
 300        reg = (reg >> 3) & 0xf;
 301        fullreg = reg << 4;
 302
 303        /*
 304         * For ichg_lo, reg value must match 10XXXX0000.
 305         * XXXX is stored in low nibble of TWL4030_BCIMFTH8.
 306         */
 307        reg = ua2regval(bci->ichg_lo, cgain);
 308        if (reg > 0x2F0)
 309                reg = 0x2F0;
 310        if (reg < 0x200)
 311                reg = 0x200;
 312        reg = (reg >> 4) & 0xf;
 313        fullreg |= reg;
 314
 315        /* ichg_eoc and ichg_lo live in same register */
 316        status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
 317        if (status < 0)
 318                return status;
 319        if (oldreg != fullreg) {
 320                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
 321                                          TWL4030_BCIMFKEY);
 322                if (status < 0)
 323                        return status;
 324                twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 325                                 fullreg, TWL4030_BCIMFTH8);
 326        }
 327
 328        /* ichg_hi threshold must be 1XXXX01100 (I think) */
 329        reg = ua2regval(bci->ichg_hi, cgain);
 330        if (reg > 0x3E0)
 331                reg = 0x3E0;
 332        if (reg < 0x200)
 333                reg = 0x200;
 334        fullreg = (reg >> 5) & 0xF;
 335        fullreg <<= 4;
 336        status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
 337        if (status < 0)
 338                return status;
 339        if ((oldreg & 0xF0) != fullreg) {
 340                fullreg |= (oldreg & 0x0F);
 341                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
 342                                          TWL4030_BCIMFKEY);
 343                if (status < 0)
 344                        return status;
 345                twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 346                                 fullreg, TWL4030_BCIMFTH9);
 347        }
 348
 349        /*
 350         * And finally, set the current.  This is stored in
 351         * two registers.
 352         */
 353        reg = ua2regval(cur, cgain);
 354        /* we have only 10 bits */
 355        if (reg > 0x3ff)
 356                reg = 0x3ff;
 357        status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
 358        if (status < 0)
 359                return status;
 360        cur_reg = oldreg;
 361        status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
 362        if (status < 0)
 363                return status;
 364        cur_reg |= oldreg << 8;
 365        if (reg != oldreg) {
 366                /* disable write protection for one write access for
 367                 * BCIIREF */
 368                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
 369                                          TWL4030_BCIMFKEY);
 370                if (status < 0)
 371                        return status;
 372                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 373                                          (reg & 0x100) ? 3 : 2,
 374                                          TWL4030_BCIIREF2);
 375                if (status < 0)
 376                        return status;
 377                /* disable write protection for one write access for
 378                 * BCIIREF */
 379                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
 380                                          TWL4030_BCIMFKEY);
 381                if (status < 0)
 382                        return status;
 383                status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 384                                          reg & 0xff,
 385                                          TWL4030_BCIIREF1);
 386        }
 387        if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
 388                /* Flip CGAIN and re-enable charging */
 389                bcictl1 ^= TWL4030_CGAIN;
 390                twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 391                                 bcictl1, TWL4030_BCICTL1);
 392                twl4030_clear_set_boot_bci(0, boot_bci);
 393        }
 394        return 0;
 395}
 396
 397static int twl4030_charger_get_current(void);
 398
 399static void twl4030_current_worker(struct work_struct *data)
 400{
 401        int v, curr;
 402        int res;
 403        struct twl4030_bci *bci = container_of(data, struct twl4030_bci,
 404                                               current_worker.work);
 405
 406        res = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
 407        if (res < 0)
 408                v = 0;
 409        else
 410                /* BCIVBUS uses ADCIN8, 7/1023 V/step */
 411                v = res * 6843;
 412        curr = twl4030_charger_get_current();
 413
 414        dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr,
 415                bci->usb_cur, bci->usb_cur_target);
 416
 417        if (v < USB_MIN_VOLT) {
 418                /* Back up and stop adjusting. */
 419                if (bci->usb_cur >= USB_CUR_STEP)
 420                        bci->usb_cur -= USB_CUR_STEP;
 421                bci->usb_cur_target = bci->usb_cur;
 422        } else if (bci->usb_cur >= bci->usb_cur_target ||
 423                   bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
 424                /* Reached target and voltage is OK - stop */
 425                return;
 426        } else {
 427                bci->usb_cur += USB_CUR_STEP;
 428                schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
 429        }
 430        twl4030_charger_update_current(bci);
 431}
 432
 433/*
 434 * Enable/Disable USB Charge functionality.
 435 */
 436static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 437{
 438        int ret;
 439        u32 reg;
 440
 441        if (bci->usb_mode == CHARGE_OFF)
 442                enable = false;
 443        if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
 444
 445                twl4030_charger_update_current(bci);
 446
 447                /* Need to keep phy powered */
 448                if (!bci->usb_enabled) {
 449                        pm_runtime_get_sync(bci->transceiver->dev);
 450                        bci->usb_enabled = 1;
 451                }
 452
 453                if (bci->usb_mode == CHARGE_AUTO) {
 454                        /* Enable interrupts now. */
 455                        reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
 456                                        TWL4030_TBATOR2 | TWL4030_TBATOR1 |
 457                                        TWL4030_BATSTS);
 458                        ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
 459                                       TWL4030_INTERRUPTS_BCIIMR1A);
 460                        if (ret < 0) {
 461                                dev_err(bci->dev,
 462                                        "failed to unmask interrupts: %d\n",
 463                                        ret);
 464                                return ret;
 465                        }
 466                        /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
 467                        ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
 468                }
 469
 470                /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
 471                ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
 472                        TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
 473                if (bci->usb_mode == CHARGE_LINEAR) {
 474                        /* Enable interrupts now. */
 475                        reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
 476                                        TWL4030_TBATOR1 | TWL4030_BATSTS);
 477                        ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
 478                                       TWL4030_INTERRUPTS_BCIIMR1A);
 479                        if (ret < 0) {
 480                                dev_err(bci->dev,
 481                                        "failed to unmask interrupts: %d\n",
 482                                        ret);
 483                                return ret;
 484                        }
 485                        twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
 486                        /* Watch dog key: WOVF acknowledge */
 487                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
 488                                               TWL4030_BCIWDKEY);
 489                        /* 0x24 + EKEY6: off mode */
 490                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
 491                                               TWL4030_BCIMDKEY);
 492                        /* EKEY2: Linear charge: USB path */
 493                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26,
 494                                               TWL4030_BCIMDKEY);
 495                        /* WDKEY5: stop watchdog count */
 496                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3,
 497                                               TWL4030_BCIWDKEY);
 498                        /* enable MFEN3 access */
 499                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c,
 500                                               TWL4030_BCIMFKEY);
 501                         /* ICHGEOCEN - end-of-charge monitor (current < 80mA)
 502                          *                      (charging continues)
 503                          * ICHGLOWEN - current level monitor (charge continues)
 504                          * don't monitor over-current or heat save
 505                          */
 506                        ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0,
 507                                               TWL4030_BCIMFEN3);
 508                }
 509        } else {
 510                ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
 511                ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
 512                                        TWL4030_BCIMDKEY);
 513                if (bci->usb_enabled) {
 514                        pm_runtime_mark_last_busy(bci->transceiver->dev);
 515                        pm_runtime_put_autosuspend(bci->transceiver->dev);
 516                        bci->usb_enabled = 0;
 517                }
 518                bci->usb_cur = 0;
 519        }
 520
 521        return ret;
 522}
 523
 524/*
 525 * Enable/Disable AC Charge funtionality.
 526 */
 527static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
 528{
 529        int ret;
 530
 531        if (bci->ac_mode == CHARGE_OFF)
 532                enable = false;
 533
 534        if (enable)
 535                ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
 536        else
 537                ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
 538
 539        return ret;
 540}
 541
 542/*
 543 * Enable/Disable charging of Backup Battery.
 544 */
 545static int twl4030_charger_enable_backup(int uvolt, int uamp)
 546{
 547        int ret;
 548        u8 flags;
 549
 550        if (uvolt < 2500000 ||
 551            uamp < 25) {
 552                /* disable charging of backup battery */
 553                ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
 554                                        TWL4030_BBCHEN, 0, TWL4030_BB_CFG);
 555                return ret;
 556        }
 557
 558        flags = TWL4030_BBCHEN;
 559        if (uvolt >= 3200000)
 560                flags |= TWL4030_BBSEL_3V2;
 561        else if (uvolt >= 3100000)
 562                flags |= TWL4030_BBSEL_3V1;
 563        else if (uvolt >= 3000000)
 564                flags |= TWL4030_BBSEL_3V0;
 565        else
 566                flags |= TWL4030_BBSEL_2V5;
 567
 568        if (uamp >= 1000)
 569                flags |= TWL4030_BBISEL_1000uA;
 570        else if (uamp >= 500)
 571                flags |= TWL4030_BBISEL_500uA;
 572        else if (uamp >= 150)
 573                flags |= TWL4030_BBISEL_150uA;
 574        else
 575                flags |= TWL4030_BBISEL_25uA;
 576
 577        ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
 578                                TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK,
 579                                flags,
 580                                TWL4030_BB_CFG);
 581
 582        return ret;
 583}
 584
 585/*
 586 * TWL4030 CHG_PRES (AC charger presence) events
 587 */
 588static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
 589{
 590        struct twl4030_bci *bci = arg;
 591
 592        dev_dbg(bci->dev, "CHG_PRES irq\n");
 593        /* reset current on each 'plug' event */
 594        bci->ac_cur = 500000;
 595        twl4030_charger_update_current(bci);
 596        power_supply_changed(bci->ac);
 597        power_supply_changed(bci->usb);
 598
 599        return IRQ_HANDLED;
 600}
 601
 602/*
 603 * TWL4030 BCI monitoring events
 604 */
 605static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
 606{
 607        struct twl4030_bci *bci = arg;
 608        u8 irqs1, irqs2;
 609        int ret;
 610
 611        ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1,
 612                              TWL4030_INTERRUPTS_BCIISR1A);
 613        if (ret < 0)
 614                return IRQ_HANDLED;
 615
 616        ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2,
 617                              TWL4030_INTERRUPTS_BCIISR2A);
 618        if (ret < 0)
 619                return IRQ_HANDLED;
 620
 621        dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1);
 622
 623        if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) {
 624                /* charger state change, inform the core */
 625                power_supply_changed(bci->ac);
 626                power_supply_changed(bci->usb);
 627        }
 628        twl4030_charger_update_current(bci);
 629
 630        /* various monitoring events, for now we just log them here */
 631        if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
 632                dev_warn(bci->dev, "battery temperature out of range\n");
 633
 634        if (irqs1 & TWL4030_BATSTS)
 635                dev_crit(bci->dev, "battery disconnected\n");
 636
 637        if (irqs2 & TWL4030_VBATOV)
 638                dev_crit(bci->dev, "VBAT overvoltage\n");
 639
 640        if (irqs2 & TWL4030_VBUSOV)
 641                dev_crit(bci->dev, "VBUS overvoltage\n");
 642
 643        if (irqs2 & TWL4030_ACCHGOV)
 644                dev_crit(bci->dev, "Ac charger overvoltage\n");
 645
 646        return IRQ_HANDLED;
 647}
 648
 649static void twl4030_bci_usb_work(struct work_struct *data)
 650{
 651        struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work);
 652
 653        switch (bci->event) {
 654        case USB_EVENT_VBUS:
 655        case USB_EVENT_CHARGER:
 656                twl4030_charger_enable_usb(bci, true);
 657                break;
 658        case USB_EVENT_NONE:
 659                twl4030_charger_enable_usb(bci, false);
 660                break;
 661        }
 662}
 663
 664static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
 665                               void *priv)
 666{
 667        struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
 668
 669        dev_dbg(bci->dev, "OTG notify %lu\n", val);
 670
 671        /* reset current on each 'plug' event */
 672        if (allow_usb)
 673                bci->usb_cur_target = 500000;
 674        else
 675                bci->usb_cur_target = 100000;
 676
 677        bci->event = val;
 678        schedule_work(&bci->work);
 679
 680        return NOTIFY_OK;
 681}
 682
 683/*
 684 * sysfs charger enabled store
 685 */
 686static ssize_t
 687twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
 688                          const char *buf, size_t n)
 689{
 690        struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
 691        int mode;
 692        int status;
 693
 694        mode = sysfs_match_string(modes, buf);
 695        if (mode < 0)
 696                return mode;
 697
 698        if (dev == &bci->ac->dev) {
 699                if (mode == 2)
 700                        return -EINVAL;
 701                twl4030_charger_enable_ac(bci, false);
 702                bci->ac_mode = mode;
 703                status = twl4030_charger_enable_ac(bci, true);
 704        } else {
 705                twl4030_charger_enable_usb(bci, false);
 706                bci->usb_mode = mode;
 707                status = twl4030_charger_enable_usb(bci, true);
 708        }
 709        return (status == 0) ? n : status;
 710}
 711
 712/*
 713 * sysfs charger enabled show
 714 */
 715static ssize_t
 716twl4030_bci_mode_show(struct device *dev,
 717                             struct device_attribute *attr, char *buf)
 718{
 719        struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
 720        int len = 0;
 721        int i;
 722        int mode = bci->usb_mode;
 723
 724        if (dev == &bci->ac->dev)
 725                mode = bci->ac_mode;
 726
 727        for (i = 0; i < ARRAY_SIZE(modes); i++)
 728                if (mode == i)
 729                        len += scnprintf(buf+len, PAGE_SIZE-len,
 730                                        "[%s] ", modes[i]);
 731                else
 732                        len += scnprintf(buf+len, PAGE_SIZE-len,
 733                                        "%s ", modes[i]);
 734        buf[len-1] = '\n';
 735        return len;
 736}
 737static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
 738                   twl4030_bci_mode_store);
 739
 740static int twl4030_charger_get_current(void)
 741{
 742        int curr;
 743        int ret;
 744        u8 bcictl1;
 745
 746        curr = twl4030bci_read_adc_val(TWL4030_BCIICHG);
 747        if (curr < 0)
 748                return curr;
 749
 750        ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
 751        if (ret)
 752                return ret;
 753
 754        return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
 755}
 756
 757/*
 758 * Returns the main charge FSM state
 759 * Or < 0 on failure.
 760 */
 761static int twl4030bci_state(struct twl4030_bci *bci)
 762{
 763        int ret;
 764        u8 state;
 765
 766        ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state);
 767        if (ret) {
 768                dev_err(bci->dev, "error reading BCIMSTATEC\n");
 769                return ret;
 770        }
 771
 772        dev_dbg(bci->dev, "state: %02x\n", state);
 773
 774        return state;
 775}
 776
 777static int twl4030_bci_state_to_status(int state)
 778{
 779        state &= TWL4030_MSTATEC_MASK;
 780        if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7)
 781                return POWER_SUPPLY_STATUS_CHARGING;
 782        else if (TWL4030_MSTATEC_COMPLETE1 <= state &&
 783                                        state <= TWL4030_MSTATEC_COMPLETE4)
 784                return POWER_SUPPLY_STATUS_FULL;
 785        else
 786                return POWER_SUPPLY_STATUS_NOT_CHARGING;
 787}
 788
 789static int twl4030_bci_get_property(struct power_supply *psy,
 790                                    enum power_supply_property psp,
 791                                    union power_supply_propval *val)
 792{
 793        struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
 794        int is_charging;
 795        int state;
 796        int ret;
 797
 798        state = twl4030bci_state(bci);
 799        if (state < 0)
 800                return state;
 801
 802        if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
 803                is_charging = state & TWL4030_MSTATEC_USB;
 804        else
 805                is_charging = state & TWL4030_MSTATEC_AC;
 806        if (!is_charging) {
 807                u8 s;
 808                ret = twl4030_bci_read(TWL4030_BCIMDEN, &s);
 809                if (ret < 0)
 810                        return ret;
 811                if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
 812                        is_charging = s & 1;
 813                else
 814                        is_charging = s & 2;
 815                if (is_charging)
 816                        /* A little white lie */
 817                        state = TWL4030_MSTATEC_QUICK1;
 818        }
 819
 820        switch (psp) {
 821        case POWER_SUPPLY_PROP_STATUS:
 822                if (is_charging)
 823                        val->intval = twl4030_bci_state_to_status(state);
 824                else
 825                        val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 826                break;
 827        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 828                /* charging must be active for meaningful result */
 829                if (!is_charging)
 830                        return -ENODATA;
 831                if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
 832                        ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
 833                        if (ret < 0)
 834                                return ret;
 835                        /* BCIVBUS uses ADCIN8, 7/1023 V/step */
 836                        val->intval = ret * 6843;
 837                } else {
 838                        ret = twl4030bci_read_adc_val(TWL4030_BCIVAC);
 839                        if (ret < 0)
 840                                return ret;
 841                        /* BCIVAC uses ADCIN11, 10/1023 V/step */
 842                        val->intval = ret * 9775;
 843                }
 844                break;
 845        case POWER_SUPPLY_PROP_CURRENT_NOW:
 846                if (!is_charging)
 847                        return -ENODATA;
 848                /* current measurement is shared between AC and USB */
 849                ret = twl4030_charger_get_current();
 850                if (ret < 0)
 851                        return ret;
 852                val->intval = ret;
 853                break;
 854        case POWER_SUPPLY_PROP_ONLINE:
 855                val->intval = is_charging &&
 856                        twl4030_bci_state_to_status(state) !=
 857                                POWER_SUPPLY_STATUS_NOT_CHARGING;
 858                break;
 859        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 860                val->intval = -1;
 861                if (psy->desc->type != POWER_SUPPLY_TYPE_USB) {
 862                        if (!bci->ac_is_active)
 863                                val->intval = bci->ac_cur;
 864                } else {
 865                        if (bci->ac_is_active)
 866                                val->intval = bci->usb_cur_target;
 867                }
 868                if (val->intval < 0) {
 869                        u8 bcictl1;
 870
 871                        val->intval = twl4030bci_read_adc_val(TWL4030_BCIIREF1);
 872                        if (val->intval < 0)
 873                                return val->intval;
 874                        ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
 875                        if (ret < 0)
 876                                return ret;
 877                        val->intval = regval2ua(val->intval, bcictl1 &
 878                                                        TWL4030_CGAIN);
 879                }
 880                break;
 881        default:
 882                return -EINVAL;
 883        }
 884
 885        return 0;
 886}
 887
 888static int twl4030_bci_set_property(struct power_supply *psy,
 889                                    enum power_supply_property psp,
 890                                    const union power_supply_propval *val)
 891{
 892        struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
 893
 894        switch (psp) {
 895        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 896                if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
 897                        bci->usb_cur_target = val->intval;
 898                else
 899                        bci->ac_cur = val->intval;
 900                twl4030_charger_update_current(bci);
 901                break;
 902        default:
 903                return -EINVAL;
 904        }
 905
 906        return 0;
 907}
 908
 909static int twl4030_bci_property_is_writeable(struct power_supply *psy,
 910                                      enum power_supply_property psp)
 911{
 912        switch (psp) {
 913        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 914                return true;
 915        default:
 916                return false;
 917        }
 918}
 919
 920static enum power_supply_property twl4030_charger_props[] = {
 921        POWER_SUPPLY_PROP_STATUS,
 922        POWER_SUPPLY_PROP_ONLINE,
 923        POWER_SUPPLY_PROP_VOLTAGE_NOW,
 924        POWER_SUPPLY_PROP_CURRENT_NOW,
 925        POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 926};
 927
 928#ifdef CONFIG_OF
 929static const struct twl4030_bci_platform_data *
 930twl4030_bci_parse_dt(struct device *dev)
 931{
 932        struct device_node *np = dev->of_node;
 933        struct twl4030_bci_platform_data *pdata;
 934        u32 num;
 935
 936        if (!np)
 937                return NULL;
 938        pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 939        if (!pdata)
 940                return pdata;
 941
 942        if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
 943                pdata->bb_uvolt = num;
 944        if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
 945                pdata->bb_uamp = num;
 946        return pdata;
 947}
 948#else
 949static inline const struct twl4030_bci_platform_data *
 950twl4030_bci_parse_dt(struct device *dev)
 951{
 952        return NULL;
 953}
 954#endif
 955
 956static const struct power_supply_desc twl4030_bci_ac_desc = {
 957        .name           = "twl4030_ac",
 958        .type           = POWER_SUPPLY_TYPE_MAINS,
 959        .properties     = twl4030_charger_props,
 960        .num_properties = ARRAY_SIZE(twl4030_charger_props),
 961        .get_property   = twl4030_bci_get_property,
 962        .set_property   = twl4030_bci_set_property,
 963        .property_is_writeable  = twl4030_bci_property_is_writeable,
 964};
 965
 966static const struct power_supply_desc twl4030_bci_usb_desc = {
 967        .name           = "twl4030_usb",
 968        .type           = POWER_SUPPLY_TYPE_USB,
 969        .properties     = twl4030_charger_props,
 970        .num_properties = ARRAY_SIZE(twl4030_charger_props),
 971        .get_property   = twl4030_bci_get_property,
 972        .set_property   = twl4030_bci_set_property,
 973        .property_is_writeable  = twl4030_bci_property_is_writeable,
 974};
 975
 976static int twl4030_bci_probe(struct platform_device *pdev)
 977{
 978        struct twl4030_bci *bci;
 979        const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
 980        int ret;
 981        u32 reg;
 982
 983        bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL);
 984        if (bci == NULL)
 985                return -ENOMEM;
 986
 987        if (!pdata)
 988                pdata = twl4030_bci_parse_dt(&pdev->dev);
 989
 990        bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
 991        bci->ichg_lo = 241000; /* Low threshold */
 992        bci->ichg_hi = 500000; /* High threshold */
 993        bci->ac_cur = 500000; /* 500mA */
 994        if (allow_usb)
 995                bci->usb_cur_target = 500000;  /* 500mA */
 996        else
 997                bci->usb_cur_target = 100000;  /* 100mA */
 998        bci->usb_mode = CHARGE_AUTO;
 999        bci->ac_mode = CHARGE_AUTO;
1000
1001        bci->dev = &pdev->dev;
1002        bci->irq_chg = platform_get_irq(pdev, 0);
1003        bci->irq_bci = platform_get_irq(pdev, 1);
1004
1005        platform_set_drvdata(pdev, bci);
1006
1007        INIT_WORK(&bci->work, twl4030_bci_usb_work);
1008        INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
1009
1010        bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
1011        if (IS_ERR(bci->channel_vac)) {
1012                ret = PTR_ERR(bci->channel_vac);
1013                if (ret == -EPROBE_DEFER)
1014                        return ret;     /* iio not ready */
1015                dev_warn(&pdev->dev, "could not request vac iio channel (%d)",
1016                        ret);
1017                bci->channel_vac = NULL;
1018        }
1019
1020        if (bci->dev->of_node) {
1021                struct device_node *phynode;
1022
1023                phynode = of_get_compatible_child(bci->dev->of_node->parent,
1024                                                  "ti,twl4030-usb");
1025                if (phynode) {
1026                        bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
1027                        bci->transceiver = devm_usb_get_phy_by_node(
1028                                bci->dev, phynode, &bci->usb_nb);
1029                        of_node_put(phynode);
1030                        if (IS_ERR(bci->transceiver)) {
1031                                ret = PTR_ERR(bci->transceiver);
1032                                if (ret == -EPROBE_DEFER)
1033                                        return ret;     /* phy not ready */
1034                                dev_warn(&pdev->dev, "could not request transceiver (%d)",
1035                                        ret);
1036                                bci->transceiver = NULL;
1037                        }
1038                }
1039        }
1040
1041        bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
1042                                             NULL);
1043        if (IS_ERR(bci->ac)) {
1044                ret = PTR_ERR(bci->ac);
1045                dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
1046                return ret;
1047        }
1048
1049        bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
1050                                              NULL);
1051        if (IS_ERR(bci->usb)) {
1052                ret = PTR_ERR(bci->usb);
1053                dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
1054                return ret;
1055        }
1056
1057        ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
1058                        twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
1059                        bci);
1060        if (ret < 0) {
1061                dev_err(&pdev->dev, "could not request irq %d, status %d\n",
1062                        bci->irq_chg, ret);
1063                return ret;
1064        }
1065
1066        ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL,
1067                        twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
1068        if (ret < 0) {
1069                dev_err(&pdev->dev, "could not request irq %d, status %d\n",
1070                        bci->irq_bci, ret);
1071                return ret;
1072        }
1073
1074        /* Enable interrupts now. */
1075        reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
1076                TWL4030_TBATOR1 | TWL4030_BATSTS);
1077        ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
1078                               TWL4030_INTERRUPTS_BCIIMR1A);
1079        if (ret < 0) {
1080                dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
1081                return ret;
1082        }
1083
1084        reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
1085        ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
1086                               TWL4030_INTERRUPTS_BCIIMR2A);
1087        if (ret < 0)
1088                dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
1089
1090        twl4030_charger_update_current(bci);
1091        if (device_create_file(&bci->usb->dev, &dev_attr_mode))
1092                dev_warn(&pdev->dev, "could not create sysfs file\n");
1093        if (device_create_file(&bci->ac->dev, &dev_attr_mode))
1094                dev_warn(&pdev->dev, "could not create sysfs file\n");
1095
1096        twl4030_charger_enable_ac(bci, true);
1097        if (!IS_ERR_OR_NULL(bci->transceiver))
1098                twl4030_bci_usb_ncb(&bci->usb_nb,
1099                                    bci->transceiver->last_event,
1100                                    NULL);
1101        else
1102                twl4030_charger_enable_usb(bci, false);
1103        if (pdata)
1104                twl4030_charger_enable_backup(pdata->bb_uvolt,
1105                                              pdata->bb_uamp);
1106        else
1107                twl4030_charger_enable_backup(0, 0);
1108
1109        return 0;
1110}
1111
1112static int twl4030_bci_remove(struct platform_device *pdev)
1113{
1114        struct twl4030_bci *bci = platform_get_drvdata(pdev);
1115
1116        twl4030_charger_enable_ac(bci, false);
1117        twl4030_charger_enable_usb(bci, false);
1118        twl4030_charger_enable_backup(0, 0);
1119
1120        device_remove_file(&bci->usb->dev, &dev_attr_mode);
1121        device_remove_file(&bci->ac->dev, &dev_attr_mode);
1122        /* mask interrupts */
1123        twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
1124                         TWL4030_INTERRUPTS_BCIIMR1A);
1125        twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
1126                         TWL4030_INTERRUPTS_BCIIMR2A);
1127
1128        return 0;
1129}
1130
1131static const struct of_device_id twl_bci_of_match[] = {
1132        {.compatible = "ti,twl4030-bci", },
1133        { }
1134};
1135MODULE_DEVICE_TABLE(of, twl_bci_of_match);
1136
1137static struct platform_driver twl4030_bci_driver = {
1138        .probe = twl4030_bci_probe,
1139        .remove = twl4030_bci_remove,
1140        .driver = {
1141                .name   = "twl4030_bci",
1142                .of_match_table = of_match_ptr(twl_bci_of_match),
1143        },
1144};
1145module_platform_driver(twl4030_bci_driver);
1146
1147MODULE_AUTHOR("Gražvydas Ignotas");
1148MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
1149MODULE_LICENSE("GPL");
1150MODULE_ALIAS("platform:twl4030_bci");
1151