// SPDX-License-Identifier: GPL-2.0
/*
 *  linux/arch/parisc/kernel/time.c
 *
 *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
 *  Modifications for ARM (C) 1994, 1995, 1996,1997 Russell King
 *  Copyright (C) 1999 SuSE GmbH, (Philipp Rumpf, prumpf@tux.org)
 *
 * 1994-07-02  Alan Modra
 *             fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
 * 1998-12-20  Updated NTP code according to technical memorandum Jan '96
 *             "A Kernel Model for Precision Timekeeping" by Dave Mills
 */
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/sched.h>
#include <linux/sched/clock.h>
#include <linux/sched_clock.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/profile.h>
#include <linux/clocksource.h>
#include <linux/platform_device.h>
#include <linux/ftrace.h>

#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/param.h>
#include <asm/pdc.h>
#include <asm/led.h>

#include <linux/timex.h>

static unsigned long clocktick __ro_after_init; /* timer cycles per tick */

/*
 * We keep time on PA-RISC Linux by using the Interval Timer which is
 * a pair of registers; one is read-only and one is write-only; both
 * accessed through CR16.  The read-only register is 32 or 64 bits wide,
 * and increments by 1 every CPU clock tick.  The architecture only
 * guarantees us a rate between 0.5 and 2, but all implementations use a
 * rate of 1.  The write-only register is 32-bits wide.  When the lowest
 * 32 bits of the read-only register compare equal to the write-only
 * register, it raises a maskable external interrupt.  Each processor has
 * an Interval Timer of its own and they are not synchronised.  
 *
 * We want to generate an interrupt every 1/HZ seconds.  So we program
 * CR16 to interrupt every @clocktick cycles.  The it_value in cpu_data
 * is programmed with the intended time of the next tick.  We can be
 * held off for an arbitrarily long period of time by interrupts being
 * disabled, so we may miss one or more ticks.
 */
irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
{
        unsigned long now;
        unsigned long next_tick;
        unsigned long ticks_elapsed = 0;
        unsigned int cpu = smp_processor_id();
        struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);

        /* gcc can optimize for "read-only" case with a local clocktick */
        unsigned long cpt = clocktick;

        /* Initialize next_tick to the old expected tick time. */
        next_tick = cpuinfo->it_value;

        /* Calculate how many ticks have elapsed. */
        now = mfctl(16);
        do {
                ++ticks_elapsed;
                next_tick += cpt;
        } while (next_tick - now > cpt);

        /* Store (in CR16 cycles) up to when we are accounting right now. */
        cpuinfo->it_value = next_tick;

        /* Go do system house keeping. */
        if (cpu != 0)
                ticks_elapsed = 0;
        legacy_timer_tick(ticks_elapsed);

        /* Skip clockticks on purpose if we know we would miss those.
         * The new CR16 must be "later" than current CR16 otherwise
         * itimer would not fire until CR16 wrapped - e.g 4 seconds
         * later on a 1Ghz processor. We'll account for the missed
         * ticks on the next timer interrupt.
         * We want IT to fire modulo clocktick even if we miss/skip some.
         * But those interrupts don't in fact get delivered that regularly.
         *
         * "next_tick - now" will always give the difference regardless
         * if one or the other wrapped. If "now" is "bigger" we'll end up
         * with a very large unsigned number.
         */
        now = mfctl(16);
        while (next_tick - now > cpt)
                next_tick += cpt;

        /* Program the IT when to deliver the next interrupt.
         * Only bottom 32-bits of next_tick are writable in CR16!
         * Timer interrupt will be delivered at least a few hundred cycles
         * after the IT fires, so if we are too close (<= 8000 cycles) to the
         * next cycle, simply skip it.
         */
        if (next_tick - now <= 8000)
                next_tick += cpt;
        mtctl(next_tick, 16);

        return IRQ_HANDLED;
}


unsigned long profile_pc(struct pt_regs *regs)
{
        unsigned long pc = instruction_pointer(regs);

        if (regs->gr[0] & PSW_N)
                pc -= 4;

#ifdef CONFIG_SMP
        if (in_lock_functions(pc))
                pc = regs->gr[2];
#endif

        return pc;
}
EXPORT_SYMBOL(profile_pc);


/* clock source code */

static u64 notrace read_cr16(struct clocksource *cs)
{
        return get_cycles();
}

static struct clocksource clocksource_cr16 = {
        .name                   = "cr16",
        .rating                 = 300,
        .read                   = read_cr16,
        .mask                   = CLOCKSOURCE_MASK(BITS_PER_LONG),
        .flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
};

void __init start_cpu_itimer(void)
{
        unsigned int cpu = smp_processor_id();
        unsigned long next_tick = mfctl(16) + clocktick;

        mtctl(next_tick, 16);           /* kick off Interval Timer (CR16) */

        per_cpu(cpu_data, cpu).it_value = next_tick;
}

#if IS_ENABLED(CONFIG_RTC_DRV_GENERIC)
static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
{
        struct pdc_tod tod_data;

        memset(tm, 0, sizeof(*tm));
        if (pdc_tod_read(&tod_data) < 0)
                return -EOPNOTSUPP;

        /* we treat tod_sec as unsigned, so this can work until year 2106 */
        rtc_time64_to_tm(tod_data.tod_sec, tm);
        return 0;
}

static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
{
        time64_t secs = rtc_tm_to_time64(tm);
        int ret;

        /* hppa has Y2K38 problem: pdc_tod_set() takes an u32 value! */
        ret = pdc_tod_set(secs, 0);
        if (ret != 0) {
                pr_warn("pdc_tod_set(%lld) returned error %d\n", secs, ret);
                if (ret == PDC_INVALID_ARG)
                        return -EINVAL;
                return -EOPNOTSUPP;
        }

        return 0;
}

static const struct rtc_class_ops rtc_generic_ops = {
        .read_time = rtc_generic_get_time,
        .set_time = rtc_generic_set_time,
};

static int __init rtc_init(void)
{
        struct platform_device *pdev;

        pdev = platform_device_register_data(NULL, "rtc-generic", -1,
                                             &rtc_generic_ops,
                                             sizeof(rtc_generic_ops));

        return PTR_ERR_OR_ZERO(pdev);
}
device_initcall(rtc_init);
#endif

void read_persistent_clock64(struct timespec64 *ts)
{
        static struct pdc_tod tod_data;
        if (pdc_tod_read(&tod_data) == 0) {
                ts->tv_sec = tod_data.tod_sec;
                ts->tv_nsec = tod_data.tod_usec * 1000;
        } else {
                printk(KERN_ERR "Error reading tod clock\n");
                ts->tv_sec = 0;
                ts->tv_nsec = 0;
        }
}


static u64 notrace read_cr16_sched_clock(void)
{
        return get_cycles();
}


/*
 * timer interrupt and sched_clock() initialization
 */

void __init time_init(void)
{
        unsigned long cr16_hz;

        clocktick = (100 * PAGE0->mem_10msec) / HZ;
        start_cpu_itimer();     /* get CPU 0 started */

        cr16_hz = 100 * PAGE0->mem_10msec;  /* Hz */

        /* register as sched_clock source */
        sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz);
}

static int __init init_cr16_clocksource(void)
{
        /*
         * The cr16 interval timers are not syncronized across CPUs on
         * different sockets, so mark them unstable and lower rating on
         * multi-socket SMP systems.
         */
        if (num_online_cpus() > 1 && !running_on_qemu) {
                int cpu;
                unsigned long cpu0_loc;
                cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;

                for_each_online_cpu(cpu) {
                        if (cpu == 0)
                                continue;
                        if ((cpu0_loc != 0) &&
                            (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
                                continue;

                        /* mark sched_clock unstable */
                        clear_sched_clock_stable();

                        clocksource_cr16.name = "cr16_unstable";
                        clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
                        clocksource_cr16.rating = 0;
                        break;
                }
        }

        /* register at clocksource framework */
        clocksource_register_hz(&clocksource_cr16,
                100 * PAGE0->mem_10msec);

        return 0;
}

device_initcall(init_cr16_clocksource);