LXR linux/drivers/gpu/ipu-v3/ipu-di.c

   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
   4 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
   5 */
   6#include <linux/export.h>
   7#include <linux/module.h>
   8#include <linux/types.h>
   9#include <linux/errno.h>
  10#include <linux/io.h>
  11#include <linux/err.h>
  12#include <linux/platform_device.h>
  13
  14#include <video/imx-ipu-v3.h>
  15#include "ipu-prv.h"
  16
  17struct ipu_di {
  18        void __iomem *base;
  19        int id;
  20        u32 module;
  21        struct clk *clk_di;     /* display input clock */
  22        struct clk *clk_ipu;    /* IPU bus clock */
  23        struct clk *clk_di_pixel; /* resulting pixel clock */
  24        bool inuse;
  25        struct ipu_soc *ipu;
  26};
  27
  28static DEFINE_MUTEX(di_mutex);
  29
  30struct di_sync_config {
  31        int run_count;
  32        int run_src;
  33        int offset_count;
  34        int offset_src;
  35        int repeat_count;
  36        int cnt_clr_src;
  37        int cnt_polarity_gen_en;
  38        int cnt_polarity_clr_src;
  39        int cnt_polarity_trigger_src;
  40        int cnt_up;
  41        int cnt_down;
  42};
  43
  44enum di_pins {
  45        DI_PIN11 = 0,
  46        DI_PIN12 = 1,
  47        DI_PIN13 = 2,
  48        DI_PIN14 = 3,
  49        DI_PIN15 = 4,
  50        DI_PIN16 = 5,
  51        DI_PIN17 = 6,
  52        DI_PIN_CS = 7,
  53
  54        DI_PIN_SER_CLK = 0,
  55        DI_PIN_SER_RS = 1,
  56};
  57
  58enum di_sync_wave {
  59        DI_SYNC_NONE = 0,
  60        DI_SYNC_CLK = 1,
  61        DI_SYNC_INT_HSYNC = 2,
  62        DI_SYNC_HSYNC = 3,
  63        DI_SYNC_VSYNC = 4,
  64        DI_SYNC_DE = 6,
  65
  66        DI_SYNC_CNT1 = 2,       /* counter >= 2 only */
  67        DI_SYNC_CNT4 = 5,       /* counter >= 5 only */
  68        DI_SYNC_CNT5 = 6,       /* counter >= 6 only */
  69};
  70
  71#define SYNC_WAVE 0
  72
  73#define DI_GENERAL              0x0000
  74#define DI_BS_CLKGEN0           0x0004
  75#define DI_BS_CLKGEN1           0x0008
  76#define DI_SW_GEN0(gen)         (0x000c + 4 * ((gen) - 1))
  77#define DI_SW_GEN1(gen)         (0x0030 + 4 * ((gen) - 1))
  78#define DI_STP_REP(gen)         (0x0148 + 4 * (((gen) - 1)/2))
  79#define DI_SYNC_AS_GEN          0x0054
  80#define DI_DW_GEN(gen)          (0x0058 + 4 * (gen))
  81#define DI_DW_SET(gen, set)     (0x0088 + 4 * ((gen) + 0xc * (set)))
  82#define DI_SER_CONF             0x015c
  83#define DI_SSC                  0x0160
  84#define DI_POL                  0x0164
  85#define DI_AW0                  0x0168
  86#define DI_AW1                  0x016c
  87#define DI_SCR_CONF             0x0170
  88#define DI_STAT                 0x0174
  89
  90#define DI_SW_GEN0_RUN_COUNT(x)                 ((x) << 19)
  91#define DI_SW_GEN0_RUN_SRC(x)                   ((x) << 16)
  92#define DI_SW_GEN0_OFFSET_COUNT(x)              ((x) << 3)
  93#define DI_SW_GEN0_OFFSET_SRC(x)                ((x) << 0)
  94
  95#define DI_SW_GEN1_CNT_POL_GEN_EN(x)            ((x) << 29)
  96#define DI_SW_GEN1_CNT_CLR_SRC(x)               ((x) << 25)
  97#define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x)       ((x) << 12)
  98#define DI_SW_GEN1_CNT_POL_CLR_SRC(x)           ((x) << 9)
  99#define DI_SW_GEN1_CNT_DOWN(x)                  ((x) << 16)
 100#define DI_SW_GEN1_CNT_UP(x)                    (x)
 101#define DI_SW_GEN1_AUTO_RELOAD                  (0x10000000)
 102
 103#define DI_DW_GEN_ACCESS_SIZE_OFFSET            24
 104#define DI_DW_GEN_COMPONENT_SIZE_OFFSET         16
 105
 106#define DI_GEN_POLARITY_1                       (1 << 0)
 107#define DI_GEN_POLARITY_2                       (1 << 1)
 108#define DI_GEN_POLARITY_3                       (1 << 2)
 109#define DI_GEN_POLARITY_4                       (1 << 3)
 110#define DI_GEN_POLARITY_5                       (1 << 4)
 111#define DI_GEN_POLARITY_6                       (1 << 5)
 112#define DI_GEN_POLARITY_7                       (1 << 6)
 113#define DI_GEN_POLARITY_8                       (1 << 7)
 114#define DI_GEN_POLARITY_DISP_CLK                (1 << 17)
 115#define DI_GEN_DI_CLK_EXT                       (1 << 20)
 116#define DI_GEN_DI_VSYNC_EXT                     (1 << 21)
 117
 118#define DI_POL_DRDY_DATA_POLARITY               (1 << 7)
 119#define DI_POL_DRDY_POLARITY_15                 (1 << 4)
 120
 121#define DI_VSYNC_SEL_OFFSET                     13
 122
 123static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
 124{
 125        return readl(di->base + offset);
 126}
 127
 128static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
 129{
 130        writel(value, di->base + offset);
 131}
 132
 133static void ipu_di_data_wave_config(struct ipu_di *di,
 134                                     int wave_gen,
 135                                     int access_size, int component_size)
 136{
 137        u32 reg;
 138        reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
 139            (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
 140        ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
 141}
 142
 143static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
 144                int set, int up, int down)
 145{
 146        u32 reg;
 147
 148        reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
 149        reg &= ~(0x3 << (di_pin * 2));
 150        reg |= set << (di_pin * 2);
 151        ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
 152
 153        ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
 154}
 155
 156static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
 157                int start, int count)
 158{
 159        u32 reg;
 160        int i;
 161
 162        for (i = 0; i < count; i++) {
 163                struct di_sync_config *c = &config[i];
 164                int wave_gen = start + i + 1;
 165
 166                if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
 167                                (c->repeat_count >= 0x1000) ||
 168                                (c->cnt_up >= 0x400) ||
 169                                (c->cnt_down >= 0x400)) {
 170                        dev_err(di->ipu->dev, "DI%d counters out of range.\n",
 171                                        di->id);
 172                        return;
 173                }
 174
 175                reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
 176                        DI_SW_GEN0_RUN_SRC(c->run_src) |
 177                        DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
 178                        DI_SW_GEN0_OFFSET_SRC(c->offset_src);
 179                ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
 180
 181                reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
 182                        DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
 183                        DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
 184                                        c->cnt_polarity_trigger_src) |
 185                        DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
 186                        DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
 187                        DI_SW_GEN1_CNT_UP(c->cnt_up);
 188
 189                /* Enable auto reload */
 190                if (c->repeat_count == 0)
 191                        reg |= DI_SW_GEN1_AUTO_RELOAD;
 192
 193                ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
 194
 195                reg = ipu_di_read(di, DI_STP_REP(wave_gen));
 196                reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
 197                reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
 198                ipu_di_write(di, reg, DI_STP_REP(wave_gen));
 199        }
 200}
 201
 202static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 203                struct ipu_di_signal_cfg *sig)
 204{
 205        u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
 206                sig->mode.hback_porch + sig->mode.hfront_porch;
 207        u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
 208                sig->mode.vback_porch + sig->mode.vfront_porch;
 209        struct di_sync_config cfg[] = {
 210                {
 211                        /* 1: internal VSYNC for each frame */
 212                        .run_count = v_total * 2 - 1,
 213                        .run_src = 3,                   /* == counter 7 */
 214                }, {
 215                        /* PIN2: HSYNC waveform */
 216                        .run_count = h_total - 1,
 217                        .run_src = DI_SYNC_CLK,
 218                        .cnt_polarity_gen_en = 1,
 219                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
 220                        .cnt_down = sig->mode.hsync_len * 2,
 221                }, {
 222                        /* PIN3: VSYNC waveform */
 223                        .run_count = v_total - 1,
 224                        .run_src = 4,                   /* == counter 7 */
 225                        .cnt_polarity_gen_en = 1,
 226                        .cnt_polarity_trigger_src = 4,  /* == counter 7 */
 227                        .cnt_down = sig->mode.vsync_len * 2,
 228                        .cnt_clr_src = DI_SYNC_CNT1,
 229                }, {
 230                        /* 4: Field */
 231                        .run_count = v_total / 2,
 232                        .run_src = DI_SYNC_HSYNC,
 233                        .offset_count = h_total / 2,
 234                        .offset_src = DI_SYNC_CLK,
 235                        .repeat_count = 2,
 236                        .cnt_clr_src = DI_SYNC_CNT1,
 237                }, {
 238                        /* 5: Active lines */
 239                        .run_src = DI_SYNC_HSYNC,
 240                        .offset_count = (sig->mode.vsync_len +
 241                                         sig->mode.vback_porch) / 2,
 242                        .offset_src = DI_SYNC_HSYNC,
 243                        .repeat_count = sig->mode.vactive / 2,
 244                        .cnt_clr_src = DI_SYNC_CNT4,
 245                }, {
 246                        /* 6: Active pixel, referenced by DC */
 247                        .run_src = DI_SYNC_CLK,
 248                        .offset_count = sig->mode.hsync_len +
 249                                        sig->mode.hback_porch,
 250                        .offset_src = DI_SYNC_CLK,
 251                        .repeat_count = sig->mode.hactive,
 252                        .cnt_clr_src = DI_SYNC_CNT5,
 253                }, {
 254                        /* 7: Half line HSYNC */
 255                        .run_count = h_total / 2 - 1,
 256                        .run_src = DI_SYNC_CLK,
 257                }
 258        };
 259
 260        ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
 261
 262        ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
 263}
 264
 265static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 266                struct ipu_di_signal_cfg *sig, int div)
 267{
 268        u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
 269                sig->mode.hback_porch + sig->mode.hfront_porch;
 270        u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
 271                sig->mode.vback_porch + sig->mode.vfront_porch;
 272        struct di_sync_config cfg[] = {
 273                {
 274                        /* 1: INT_HSYNC */
 275                        .run_count = h_total - 1,
 276                        .run_src = DI_SYNC_CLK,
 277                } , {
 278                        /* PIN2: HSYNC */
 279                        .run_count = h_total - 1,
 280                        .run_src = DI_SYNC_CLK,
 281                        .offset_count = div * sig->v_to_h_sync,
 282                        .offset_src = DI_SYNC_CLK,
 283                        .cnt_polarity_gen_en = 1,
 284                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
 285                        .cnt_down = sig->mode.hsync_len * 2,
 286                } , {
 287                        /* PIN3: VSYNC */
 288                        .run_count = v_total - 1,
 289                        .run_src = DI_SYNC_INT_HSYNC,
 290                        .cnt_polarity_gen_en = 1,
 291                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 292                        .cnt_down = sig->mode.vsync_len * 2,
 293                } , {
 294                        /* 4: Line Active */
 295                        .run_src = DI_SYNC_HSYNC,
 296                        .offset_count = sig->mode.vsync_len +
 297                                        sig->mode.vback_porch,
 298                        .offset_src = DI_SYNC_HSYNC,
 299                        .repeat_count = sig->mode.vactive,
 300                        .cnt_clr_src = DI_SYNC_VSYNC,
 301                } , {
 302                        /* 5: Pixel Active, referenced by DC */
 303                        .run_src = DI_SYNC_CLK,
 304                        .offset_count = sig->mode.hsync_len +
 305                                        sig->mode.hback_porch,
 306                        .offset_src = DI_SYNC_CLK,
 307                        .repeat_count = sig->mode.hactive,
 308                        .cnt_clr_src = 5, /* Line Active */
 309                } , {
 310                        /* unused */
 311                } , {
 312                        /* unused */
 313                },
 314        };
 315        /* can't use #7 and #8 for line active and pixel active counters */
 316        struct di_sync_config cfg_vga[] = {
 317                {
 318                        /* 1: INT_HSYNC */
 319                        .run_count = h_total - 1,
 320                        .run_src = DI_SYNC_CLK,
 321                } , {
 322                        /* 2: VSYNC */
 323                        .run_count = v_total - 1,
 324                        .run_src = DI_SYNC_INT_HSYNC,
 325                } , {
 326                        /* 3: Line Active */
 327                        .run_src = DI_SYNC_INT_HSYNC,
 328                        .offset_count = sig->mode.vsync_len +
 329                                        sig->mode.vback_porch,
 330                        .offset_src = DI_SYNC_INT_HSYNC,
 331                        .repeat_count = sig->mode.vactive,
 332                        .cnt_clr_src = 3 /* VSYNC */,
 333                } , {
 334                        /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
 335                        .run_count = h_total - 1,
 336                        .run_src = DI_SYNC_CLK,
 337                        .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
 338                        .offset_src = DI_SYNC_CLK,
 339                        .cnt_polarity_gen_en = 1,
 340                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
 341                        .cnt_down = sig->mode.hsync_len * 2,
 342                } , {
 343                        /* 5: Pixel Active signal to DC */
 344                        .run_src = DI_SYNC_CLK,
 345                        .offset_count = sig->mode.hsync_len +
 346                                        sig->mode.hback_porch,
 347                        .offset_src = DI_SYNC_CLK,
 348                        .repeat_count = sig->mode.hactive,
 349                        .cnt_clr_src = 4, /* Line Active */
 350                } , {
 351                        /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
 352                        .run_count = v_total - 1,
 353                        .run_src = DI_SYNC_INT_HSYNC,
 354                        .offset_count = 1, /* magic value from Freescale TVE driver */
 355                        .offset_src = DI_SYNC_INT_HSYNC,
 356                        .cnt_polarity_gen_en = 1,
 357                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 358                        .cnt_down = sig->mode.vsync_len * 2,
 359                } , {
 360                        /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
 361                        .run_count = h_total - 1,
 362                        .run_src = DI_SYNC_CLK,
 363                        .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
 364                        .offset_src = DI_SYNC_CLK,
 365                        .cnt_polarity_gen_en = 1,
 366                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
 367                        .cnt_down = sig->mode.hsync_len * 2,
 368                } , {
 369                        /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
 370                        .run_count = v_total - 1,
 371                        .run_src = DI_SYNC_INT_HSYNC,
 372                        .offset_count = 1, /* magic value from Freescale TVE driver */
 373                        .offset_src = DI_SYNC_INT_HSYNC,
 374                        .cnt_polarity_gen_en = 1,
 375                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 376                        .cnt_down = sig->mode.vsync_len * 2,
 377                } , {
 378                        /* unused */
 379                },
 380        };
 381
 382        ipu_di_write(di, v_total - 1, DI_SCR_CONF);
 383        if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
 384                ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
 385        else
 386                ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
 387}
 388
 389static void ipu_di_config_clock(struct ipu_di *di,
 390        const struct ipu_di_signal_cfg *sig)
 391{
 392        struct clk *clk;
 393        unsigned clkgen0;
 394        uint32_t val;
 395
 396        if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
 397                /*
 398                 * CLKMODE_EXT means we must use the DI clock: this is
 399                 * needed for things like LVDS which needs to feed the
 400                 * DI and LDB with the same pixel clock.
 401                 */
 402                clk = di->clk_di;
 403
 404                if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
 405                        /*
 406                         * CLKMODE_SYNC means that we want the DI to be
 407                         * clocked at the same rate as the parent clock.
 408                         * This is needed (eg) for LDB which needs to be
 409                         * fed with the same pixel clock.  We assume that
 410                         * the LDB clock has already been set correctly.
 411                         */
 412                        clkgen0 = 1 << 4;
 413                } else {
 414                        /*
 415                         * We can use the divider.  We should really have
 416                         * a flag here indicating whether the bridge can
 417                         * cope with a fractional divider or not.  For the
 418                         * time being, let's go for simplicitly and
 419                         * reliability.
 420                         */
 421                        unsigned long in_rate;
 422                        unsigned div;
 423
 424                        clk_set_rate(clk, sig->mode.pixelclock);
 425
 426                        in_rate = clk_get_rate(clk);
 427                        div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 428                        div = clamp(div, 1U, 255U);
 429
 430                        clkgen0 = div << 4;
 431                }
 432        } else {
 433                /*
 434                 * For other interfaces, we can arbitarily select between
 435                 * the DI specific clock and the internal IPU clock.  See
 436                 * DI_GENERAL bit 20.  We select the IPU clock if it can
 437                 * give us a clock rate within 1% of the requested frequency,
 438                 * otherwise we use the DI clock.
 439                 */
 440                unsigned long rate, clkrate;
 441                unsigned div, error;
 442
 443                clkrate = clk_get_rate(di->clk_ipu);
 444                div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
 445                div = clamp(div, 1U, 255U);
 446                rate = clkrate / div;
 447
 448                error = rate / (sig->mode.pixelclock / 1000);
 449
 450                dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
 451                        rate, div, (signed)(error - 1000) / 10, error % 10);
 452
 453                /* Allow a 1% error */
 454                if (error < 1010 && error >= 990) {
 455                        clk = di->clk_ipu;
 456
 457                        clkgen0 = div << 4;
 458                } else {
 459                        unsigned long in_rate;
 460                        unsigned div;
 461
 462                        clk = di->clk_di;
 463
 464                        clk_set_rate(clk, sig->mode.pixelclock);
 465
 466                        in_rate = clk_get_rate(clk);
 467                        div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 468                        div = clamp(div, 1U, 255U);
 469
 470                        clkgen0 = div << 4;
 471                }
 472        }
 473
 474        di->clk_di_pixel = clk;
 475
 476        /* Set the divider */
 477        ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
 478
 479        /*
 480         * Set the high/low periods.  Bits 24:16 give us the falling edge,
 481         * and bits 8:0 give the rising edge.  LSB is fraction, and is
 482         * based on the divider above.  We want a 50% duty cycle, so set
 483         * the falling edge to be half the divider.
 484         */
 485        ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
 486
 487        /* Finally select the input clock */
 488        val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
 489        if (clk == di->clk_di)
 490                val |= DI_GEN_DI_CLK_EXT;
 491        ipu_di_write(di, val, DI_GENERAL);
 492
 493        dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
 494                sig->mode.pixelclock,
 495                clk_get_rate(di->clk_ipu),
 496                clk_get_rate(di->clk_di),
 497                clk == di->clk_di ? "DI" : "IPU",
 498                clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
 499}
 500
 501/*
 502 * This function is called to adjust a video mode to IPU restrictions.
 503 * It is meant to be called from drm crtc mode_fixup() methods.
 504 */
 505int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
 506{
 507        u32 diff;
 508
 509        if (!IS_ALIGNED(mode->hactive, 8) &&
 510            mode->hfront_porch < ALIGN(mode->hactive, 8) - mode->hactive) {
 511                dev_err(di->ipu->dev, "hactive %d is not aligned to 8 and front porch is too small to compensate\n",
 512                        mode->hactive);
 513                return -EINVAL;
 514        }
 515
 516        if (mode->vfront_porch >= 2)
 517                return 0;
 518
 519        diff = 2 - mode->vfront_porch;
 520
 521        if (mode->vback_porch >= diff) {
 522                mode->vfront_porch = 2;
 523                mode->vback_porch -= diff;
 524        } else if (mode->vsync_len > diff) {
 525                mode->vfront_porch = 2;
 526                mode->vsync_len = mode->vsync_len - diff;
 527        } else {
 528                dev_warn(di->ipu->dev, "failed to adjust videomode\n");
 529                return -EINVAL;
 530        }
 531
 532        dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
 533        return 0;
 534}
 535EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
 536
 537static u32 ipu_di_gen_polarity(int pin)
 538{
 539        switch (pin) {
 540        case 1:
 541                return DI_GEN_POLARITY_1;
 542        case 2:
 543                return DI_GEN_POLARITY_2;
 544        case 3:
 545                return DI_GEN_POLARITY_3;
 546        case 4:
 547                return DI_GEN_POLARITY_4;
 548        case 5:
 549                return DI_GEN_POLARITY_5;
 550        case 6:
 551                return DI_GEN_POLARITY_6;
 552        case 7:
 553                return DI_GEN_POLARITY_7;
 554        case 8:
 555                return DI_GEN_POLARITY_8;
 556        }
 557        return 0;
 558}
 559
 560int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 561{
 562        u32 reg;
 563        u32 di_gen, vsync_cnt;
 564        u32 div;
 565
 566        dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
 567                di->id, sig->mode.hactive, sig->mode.vactive);
 568
 569        dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
 570                clk_get_rate(di->clk_ipu),
 571                clk_get_rate(di->clk_di),
 572                sig->mode.pixelclock);
 573
 574        mutex_lock(&di_mutex);
 575
 576        ipu_di_config_clock(di, sig);
 577
 578        div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
 579        div = div / 16;         /* Now divider is integer portion */
 580
 581        /* Setup pixel clock timing */
 582        /* Down time is half of period */
 583        ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
 584
 585        ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
 586        ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
 587
 588        di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
 589        di_gen |= DI_GEN_DI_VSYNC_EXT;
 590
 591        if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
 592                ipu_di_sync_config_interlaced(di, sig);
 593
 594                /* set y_sel = 1 */
 595                di_gen |= 0x10000000;
 596
 597                vsync_cnt = 3;
 598        } else {
 599                ipu_di_sync_config_noninterlaced(di, sig, div);
 600
 601                vsync_cnt = 3;
 602                if (di->id == 1)
 603                        /*
 604                         * TODO: change only for TVEv2, parallel display
 605                         * uses pin 2 / 3
 606                         */
 607                        if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
 608                                vsync_cnt = 6;
 609        }
 610
 611        if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
 612                di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
 613        if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
 614                di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
 615
 616        if (sig->clk_pol)
 617                di_gen |= DI_GEN_POLARITY_DISP_CLK;
 618
 619        ipu_di_write(di, di_gen, DI_GENERAL);
 620
 621        ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
 622                     DI_SYNC_AS_GEN);
 623
 624        reg = ipu_di_read(di, DI_POL);
 625        reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
 626
 627        if (sig->enable_pol)
 628                reg |= DI_POL_DRDY_POLARITY_15;
 629        if (sig->data_pol)
 630                reg |= DI_POL_DRDY_DATA_POLARITY;
 631
 632        ipu_di_write(di, reg, DI_POL);
 633
 634        mutex_unlock(&di_mutex);
 635
 636        return 0;
 637}
 638EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
 639
 640int ipu_di_enable(struct ipu_di *di)
 641{
 642        int ret;
 643
 644        WARN_ON(IS_ERR(di->clk_di_pixel));
 645
 646        ret = clk_prepare_enable(di->clk_di_pixel);
 647        if (ret)
 648                return ret;
 649
 650        ipu_module_enable(di->ipu, di->module);
 651
 652        return 0;
 653}
 654EXPORT_SYMBOL_GPL(ipu_di_enable);
 655
 656int ipu_di_disable(struct ipu_di *di)
 657{
 658        WARN_ON(IS_ERR(di->clk_di_pixel));
 659
 660        ipu_module_disable(di->ipu, di->module);
 661
 662        clk_disable_unprepare(di->clk_di_pixel);
 663
 664        return 0;
 665}
 666EXPORT_SYMBOL_GPL(ipu_di_disable);
 667
 668int ipu_di_get_num(struct ipu_di *di)
 669{
 670        return di->id;
 671}
 672EXPORT_SYMBOL_GPL(ipu_di_get_num);
 673
 674static DEFINE_MUTEX(ipu_di_lock);
 675
 676struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
 677{
 678        struct ipu_di *di;
 679
 680        if (disp > 1)
 681                return ERR_PTR(-EINVAL);
 682
 683        di = ipu->di_priv[disp];
 684
 685        mutex_lock(&ipu_di_lock);
 686
 687        if (di->inuse) {
 688                di = ERR_PTR(-EBUSY);
 689                goto out;
 690        }
 691
 692        di->inuse = true;
 693out:
 694        mutex_unlock(&ipu_di_lock);
 695
 696        return di;
 697}
 698EXPORT_SYMBOL_GPL(ipu_di_get);
 699
 700void ipu_di_put(struct ipu_di *di)
 701{
 702        mutex_lock(&ipu_di_lock);
 703
 704        di->inuse = false;
 705
 706        mutex_unlock(&ipu_di_lock);
 707}
 708EXPORT_SYMBOL_GPL(ipu_di_put);
 709
 710int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
 711                unsigned long base,
 712                u32 module, struct clk *clk_ipu)
 713{
 714        struct ipu_di *di;
 715
 716        if (id > 1)
 717                return -ENODEV;
 718
 719        di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
 720        if (!di)
 721                return -ENOMEM;
 722
 723        ipu->di_priv[id] = di;
 724
 725        di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
 726        if (IS_ERR(di->clk_di))
 727                return PTR_ERR(di->clk_di);
 728
 729        di->module = module;
 730        di->id = id;
 731        di->clk_ipu = clk_ipu;
 732        di->base = devm_ioremap(dev, base, PAGE_SIZE);
 733        if (!di->base)
 734                return -ENOMEM;
 735
 736        ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
 737
 738        dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
 739                        id, base, di->base);
 740        di->inuse = false;
 741        di->ipu = ipu;
 742
 743        return 0;
 744}
 745
 746void ipu_di_exit(struct ipu_soc *ipu, int id)
 747{
 748}
 749