linux/drivers/hwmon/max6639.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * max6639.c - Support for Maxim MAX6639
   4 *
   5 * 2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
   6 *
   7 * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
   8 *
   9 * based on the initial MAX6639 support from semptian.net
  10 * by He Changqing <hechangqing@semptian.com>
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/init.h>
  15#include <linux/slab.h>
  16#include <linux/jiffies.h>
  17#include <linux/i2c.h>
  18#include <linux/hwmon.h>
  19#include <linux/hwmon-sysfs.h>
  20#include <linux/err.h>
  21#include <linux/mutex.h>
  22#include <linux/platform_data/max6639.h>
  23
  24/* Addresses to scan */
  25static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
  26
  27/* The MAX6639 registers, valid channel numbers: 0, 1 */
  28#define MAX6639_REG_TEMP(ch)                    (0x00 + (ch))
  29#define MAX6639_REG_STATUS                      0x02
  30#define MAX6639_REG_OUTPUT_MASK                 0x03
  31#define MAX6639_REG_GCONFIG                     0x04
  32#define MAX6639_REG_TEMP_EXT(ch)                (0x05 + (ch))
  33#define MAX6639_REG_ALERT_LIMIT(ch)             (0x08 + (ch))
  34#define MAX6639_REG_OT_LIMIT(ch)                (0x0A + (ch))
  35#define MAX6639_REG_THERM_LIMIT(ch)             (0x0C + (ch))
  36#define MAX6639_REG_FAN_CONFIG1(ch)             (0x10 + (ch) * 4)
  37#define MAX6639_REG_FAN_CONFIG2a(ch)            (0x11 + (ch) * 4)
  38#define MAX6639_REG_FAN_CONFIG2b(ch)            (0x12 + (ch) * 4)
  39#define MAX6639_REG_FAN_CONFIG3(ch)             (0x13 + (ch) * 4)
  40#define MAX6639_REG_FAN_CNT(ch)                 (0x20 + (ch))
  41#define MAX6639_REG_TARGET_CNT(ch)              (0x22 + (ch))
  42#define MAX6639_REG_FAN_PPR(ch)                 (0x24 + (ch))
  43#define MAX6639_REG_TARGTDUTY(ch)               (0x26 + (ch))
  44#define MAX6639_REG_FAN_START_TEMP(ch)          (0x28 + (ch))
  45#define MAX6639_REG_DEVID                       0x3D
  46#define MAX6639_REG_MANUID                      0x3E
  47#define MAX6639_REG_DEVREV                      0x3F
  48
  49/* Register bits */
  50#define MAX6639_GCONFIG_STANDBY                 0x80
  51#define MAX6639_GCONFIG_POR                     0x40
  52#define MAX6639_GCONFIG_DISABLE_TIMEOUT         0x20
  53#define MAX6639_GCONFIG_CH2_LOCAL               0x10
  54#define MAX6639_GCONFIG_PWM_FREQ_HI             0x08
  55
  56#define MAX6639_FAN_CONFIG1_PWM                 0x80
  57
  58#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED    0x40
  59
  60static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
  61
  62#define FAN_FROM_REG(val, rpm_range)    ((val) == 0 || (val) == 255 ? \
  63                                0 : (rpm_ranges[rpm_range] * 30) / (val))
  64#define TEMP_LIMIT_TO_REG(val)  clamp_val((val) / 1000, 0, 255)
  65
  66/*
  67 * Client data (each client gets its own)
  68 */
  69struct max6639_data {
  70        struct i2c_client *client;
  71        struct mutex update_lock;
  72        char valid;             /* !=0 if following fields are valid */
  73        unsigned long last_updated;     /* In jiffies */
  74
  75        /* Register values sampled regularly */
  76        u16 temp[2];            /* Temperature, in 1/8 C, 0..255 C */
  77        bool temp_fault[2];     /* Detected temperature diode failure */
  78        u8 fan[2];              /* Register value: TACH count for fans >=30 */
  79        u8 status;              /* Detected channel alarms and fan failures */
  80
  81        /* Register values only written to */
  82        u8 pwm[2];              /* Register value: Duty cycle 0..120 */
  83        u8 temp_therm[2];       /* THERM Temperature, 0..255 C (->_max) */
  84        u8 temp_alert[2];       /* ALERT Temperature, 0..255 C (->_crit) */
  85        u8 temp_ot[2];          /* OT Temperature, 0..255 C (->_emergency) */
  86
  87        /* Register values initialized only once */
  88        u8 ppr;                 /* Pulses per rotation 0..3 for 1..4 ppr */
  89        u8 rpm_range;           /* Index in above rpm_ranges table */
  90};
  91
  92static struct max6639_data *max6639_update_device(struct device *dev)
  93{
  94        struct max6639_data *data = dev_get_drvdata(dev);
  95        struct i2c_client *client = data->client;
  96        struct max6639_data *ret = data;
  97        int i;
  98        int status_reg;
  99
 100        mutex_lock(&data->update_lock);
 101
 102        if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 103                int res;
 104
 105                dev_dbg(&client->dev, "Starting max6639 update\n");
 106
 107                status_reg = i2c_smbus_read_byte_data(client,
 108                                                      MAX6639_REG_STATUS);
 109                if (status_reg < 0) {
 110                        ret = ERR_PTR(status_reg);
 111                        goto abort;
 112                }
 113
 114                data->status = status_reg;
 115
 116                for (i = 0; i < 2; i++) {
 117                        res = i2c_smbus_read_byte_data(client,
 118                                        MAX6639_REG_FAN_CNT(i));
 119                        if (res < 0) {
 120                                ret = ERR_PTR(res);
 121                                goto abort;
 122                        }
 123                        data->fan[i] = res;
 124
 125                        res = i2c_smbus_read_byte_data(client,
 126                                        MAX6639_REG_TEMP_EXT(i));
 127                        if (res < 0) {
 128                                ret = ERR_PTR(res);
 129                                goto abort;
 130                        }
 131                        data->temp[i] = res >> 5;
 132                        data->temp_fault[i] = res & 0x01;
 133
 134                        res = i2c_smbus_read_byte_data(client,
 135                                        MAX6639_REG_TEMP(i));
 136                        if (res < 0) {
 137                                ret = ERR_PTR(res);
 138                                goto abort;
 139                        }
 140                        data->temp[i] |= res << 3;
 141                }
 142
 143                data->last_updated = jiffies;
 144                data->valid = 1;
 145        }
 146abort:
 147        mutex_unlock(&data->update_lock);
 148
 149        return ret;
 150}
 151
 152static ssize_t temp_input_show(struct device *dev,
 153                               struct device_attribute *dev_attr, char *buf)
 154{
 155        long temp;
 156        struct max6639_data *data = max6639_update_device(dev);
 157        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 158
 159        if (IS_ERR(data))
 160                return PTR_ERR(data);
 161
 162        temp = data->temp[attr->index] * 125;
 163        return sprintf(buf, "%ld\n", temp);
 164}
 165
 166static ssize_t temp_fault_show(struct device *dev,
 167                               struct device_attribute *dev_attr, char *buf)
 168{
 169        struct max6639_data *data = max6639_update_device(dev);
 170        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 171
 172        if (IS_ERR(data))
 173                return PTR_ERR(data);
 174
 175        return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
 176}
 177
 178static ssize_t temp_max_show(struct device *dev,
 179                             struct device_attribute *dev_attr, char *buf)
 180{
 181        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 182        struct max6639_data *data = dev_get_drvdata(dev);
 183
 184        return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
 185}
 186
 187static ssize_t temp_max_store(struct device *dev,
 188                              struct device_attribute *dev_attr,
 189                              const char *buf, size_t count)
 190{
 191        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 192        struct max6639_data *data = dev_get_drvdata(dev);
 193        struct i2c_client *client = data->client;
 194        unsigned long val;
 195        int res;
 196
 197        res = kstrtoul(buf, 10, &val);
 198        if (res)
 199                return res;
 200
 201        mutex_lock(&data->update_lock);
 202        data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
 203        i2c_smbus_write_byte_data(client,
 204                                  MAX6639_REG_THERM_LIMIT(attr->index),
 205                                  data->temp_therm[attr->index]);
 206        mutex_unlock(&data->update_lock);
 207        return count;
 208}
 209
 210static ssize_t temp_crit_show(struct device *dev,
 211                              struct device_attribute *dev_attr, char *buf)
 212{
 213        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 214        struct max6639_data *data = dev_get_drvdata(dev);
 215
 216        return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
 217}
 218
 219static ssize_t temp_crit_store(struct device *dev,
 220                               struct device_attribute *dev_attr,
 221                               const char *buf, size_t count)
 222{
 223        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 224        struct max6639_data *data = dev_get_drvdata(dev);
 225        struct i2c_client *client = data->client;
 226        unsigned long val;
 227        int res;
 228
 229        res = kstrtoul(buf, 10, &val);
 230        if (res)
 231                return res;
 232
 233        mutex_lock(&data->update_lock);
 234        data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
 235        i2c_smbus_write_byte_data(client,
 236                                  MAX6639_REG_ALERT_LIMIT(attr->index),
 237                                  data->temp_alert[attr->index]);
 238        mutex_unlock(&data->update_lock);
 239        return count;
 240}
 241
 242static ssize_t temp_emergency_show(struct device *dev,
 243                                   struct device_attribute *dev_attr,
 244                                   char *buf)
 245{
 246        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 247        struct max6639_data *data = dev_get_drvdata(dev);
 248
 249        return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
 250}
 251
 252static ssize_t temp_emergency_store(struct device *dev,
 253                                    struct device_attribute *dev_attr,
 254                                    const char *buf, size_t count)
 255{
 256        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 257        struct max6639_data *data = dev_get_drvdata(dev);
 258        struct i2c_client *client = data->client;
 259        unsigned long val;
 260        int res;
 261
 262        res = kstrtoul(buf, 10, &val);
 263        if (res)
 264                return res;
 265
 266        mutex_lock(&data->update_lock);
 267        data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
 268        i2c_smbus_write_byte_data(client,
 269                                  MAX6639_REG_OT_LIMIT(attr->index),
 270                                  data->temp_ot[attr->index]);
 271        mutex_unlock(&data->update_lock);
 272        return count;
 273}
 274
 275static ssize_t pwm_show(struct device *dev, struct device_attribute *dev_attr,
 276                        char *buf)
 277{
 278        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 279        struct max6639_data *data = dev_get_drvdata(dev);
 280
 281        return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
 282}
 283
 284static ssize_t pwm_store(struct device *dev,
 285                         struct device_attribute *dev_attr, const char *buf,
 286                         size_t count)
 287{
 288        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 289        struct max6639_data *data = dev_get_drvdata(dev);
 290        struct i2c_client *client = data->client;
 291        unsigned long val;
 292        int res;
 293
 294        res = kstrtoul(buf, 10, &val);
 295        if (res)
 296                return res;
 297
 298        val = clamp_val(val, 0, 255);
 299
 300        mutex_lock(&data->update_lock);
 301        data->pwm[attr->index] = (u8)(val * 120 / 255);
 302        i2c_smbus_write_byte_data(client,
 303                                  MAX6639_REG_TARGTDUTY(attr->index),
 304                                  data->pwm[attr->index]);
 305        mutex_unlock(&data->update_lock);
 306        return count;
 307}
 308
 309static ssize_t fan_input_show(struct device *dev,
 310                              struct device_attribute *dev_attr, char *buf)
 311{
 312        struct max6639_data *data = max6639_update_device(dev);
 313        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 314
 315        if (IS_ERR(data))
 316                return PTR_ERR(data);
 317
 318        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
 319                       data->rpm_range));
 320}
 321
 322static ssize_t alarm_show(struct device *dev,
 323                          struct device_attribute *dev_attr, char *buf)
 324{
 325        struct max6639_data *data = max6639_update_device(dev);
 326        struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
 327
 328        if (IS_ERR(data))
 329                return PTR_ERR(data);
 330
 331        return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
 332}
 333
 334static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
 335static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1);
 336static SENSOR_DEVICE_ATTR_RO(temp1_fault, temp_fault, 0);
 337static SENSOR_DEVICE_ATTR_RO(temp2_fault, temp_fault, 1);
 338static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
 339static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
 340static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0);
 341static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1);
 342static SENSOR_DEVICE_ATTR_RW(temp1_emergency, temp_emergency, 0);
 343static SENSOR_DEVICE_ATTR_RW(temp2_emergency, temp_emergency, 1);
 344static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
 345static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
 346static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
 347static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
 348static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, 1);
 349static SENSOR_DEVICE_ATTR_RO(fan2_fault, alarm, 0);
 350static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 3);
 351static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 2);
 352static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 7);
 353static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 6);
 354static SENSOR_DEVICE_ATTR_RO(temp1_emergency_alarm, alarm, 5);
 355static SENSOR_DEVICE_ATTR_RO(temp2_emergency_alarm, alarm, 4);
 356
 357
 358static struct attribute *max6639_attrs[] = {
 359        &sensor_dev_attr_temp1_input.dev_attr.attr,
 360        &sensor_dev_attr_temp2_input.dev_attr.attr,
 361        &sensor_dev_attr_temp1_fault.dev_attr.attr,
 362        &sensor_dev_attr_temp2_fault.dev_attr.attr,
 363        &sensor_dev_attr_temp1_max.dev_attr.attr,
 364        &sensor_dev_attr_temp2_max.dev_attr.attr,
 365        &sensor_dev_attr_temp1_crit.dev_attr.attr,
 366        &sensor_dev_attr_temp2_crit.dev_attr.attr,
 367        &sensor_dev_attr_temp1_emergency.dev_attr.attr,
 368        &sensor_dev_attr_temp2_emergency.dev_attr.attr,
 369        &sensor_dev_attr_pwm1.dev_attr.attr,
 370        &sensor_dev_attr_pwm2.dev_attr.attr,
 371        &sensor_dev_attr_fan1_input.dev_attr.attr,
 372        &sensor_dev_attr_fan2_input.dev_attr.attr,
 373        &sensor_dev_attr_fan1_fault.dev_attr.attr,
 374        &sensor_dev_attr_fan2_fault.dev_attr.attr,
 375        &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 376        &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 377        &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 378        &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 379        &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
 380        &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
 381        NULL
 382};
 383ATTRIBUTE_GROUPS(max6639);
 384
 385/*
 386 *  returns respective index in rpm_ranges table
 387 *  1 by default on invalid range
 388 */
 389static int rpm_range_to_reg(int range)
 390{
 391        int i;
 392
 393        for (i = 0; i < ARRAY_SIZE(rpm_ranges); i++) {
 394                if (rpm_ranges[i] == range)
 395                        return i;
 396        }
 397
 398        return 1; /* default: 4000 RPM */
 399}
 400
 401static int max6639_init_client(struct i2c_client *client,
 402                               struct max6639_data *data)
 403{
 404        struct max6639_platform_data *max6639_info =
 405                dev_get_platdata(&client->dev);
 406        int i;
 407        int rpm_range = 1; /* default: 4000 RPM */
 408        int err;
 409
 410        /* Reset chip to default values, see below for GCONFIG setup */
 411        err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
 412                                  MAX6639_GCONFIG_POR);
 413        if (err)
 414                goto exit;
 415
 416        /* Fans pulse per revolution is 2 by default */
 417        if (max6639_info && max6639_info->ppr > 0 &&
 418                        max6639_info->ppr < 5)
 419                data->ppr = max6639_info->ppr;
 420        else
 421                data->ppr = 2;
 422        data->ppr -= 1;
 423
 424        if (max6639_info)
 425                rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
 426        data->rpm_range = rpm_range;
 427
 428        for (i = 0; i < 2; i++) {
 429
 430                /* Set Fan pulse per revolution */
 431                err = i2c_smbus_write_byte_data(client,
 432                                MAX6639_REG_FAN_PPR(i),
 433                                data->ppr << 6);
 434                if (err)
 435                        goto exit;
 436
 437                /* Fans config PWM, RPM */
 438                err = i2c_smbus_write_byte_data(client,
 439                        MAX6639_REG_FAN_CONFIG1(i),
 440                        MAX6639_FAN_CONFIG1_PWM | rpm_range);
 441                if (err)
 442                        goto exit;
 443
 444                /* Fans PWM polarity high by default */
 445                if (max6639_info && max6639_info->pwm_polarity == 0)
 446                        err = i2c_smbus_write_byte_data(client,
 447                                MAX6639_REG_FAN_CONFIG2a(i), 0x00);
 448                else
 449                        err = i2c_smbus_write_byte_data(client,
 450                                MAX6639_REG_FAN_CONFIG2a(i), 0x02);
 451                if (err)
 452                        goto exit;
 453
 454                /*
 455                 * /THERM full speed enable,
 456                 * PWM frequency 25kHz, see also GCONFIG below
 457                 */
 458                err = i2c_smbus_write_byte_data(client,
 459                        MAX6639_REG_FAN_CONFIG3(i),
 460                        MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
 461                if (err)
 462                        goto exit;
 463
 464                /* Max. temp. 80C/90C/100C */
 465                data->temp_therm[i] = 80;
 466                data->temp_alert[i] = 90;
 467                data->temp_ot[i] = 100;
 468                err = i2c_smbus_write_byte_data(client,
 469                                MAX6639_REG_THERM_LIMIT(i),
 470                                data->temp_therm[i]);
 471                if (err)
 472                        goto exit;
 473                err = i2c_smbus_write_byte_data(client,
 474                                MAX6639_REG_ALERT_LIMIT(i),
 475                                data->temp_alert[i]);
 476                if (err)
 477                        goto exit;
 478                err = i2c_smbus_write_byte_data(client,
 479                                MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
 480                if (err)
 481                        goto exit;
 482
 483                /* PWM 120/120 (i.e. 100%) */
 484                data->pwm[i] = 120;
 485                err = i2c_smbus_write_byte_data(client,
 486                                MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
 487                if (err)
 488                        goto exit;
 489        }
 490        /* Start monitoring */
 491        err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
 492                MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
 493                MAX6639_GCONFIG_PWM_FREQ_HI);
 494exit:
 495        return err;
 496}
 497
 498/* Return 0 if detection is successful, -ENODEV otherwise */
 499static int max6639_detect(struct i2c_client *client,
 500                          struct i2c_board_info *info)
 501{
 502        struct i2c_adapter *adapter = client->adapter;
 503        int dev_id, manu_id;
 504
 505        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 506                return -ENODEV;
 507
 508        /* Actual detection via device and manufacturer ID */
 509        dev_id = i2c_smbus_read_byte_data(client, MAX6639_REG_DEVID);
 510        manu_id = i2c_smbus_read_byte_data(client, MAX6639_REG_MANUID);
 511        if (dev_id != 0x58 || manu_id != 0x4D)
 512                return -ENODEV;
 513
 514        strlcpy(info->type, "max6639", I2C_NAME_SIZE);
 515
 516        return 0;
 517}
 518
 519static int max6639_probe(struct i2c_client *client)
 520{
 521        struct device *dev = &client->dev;
 522        struct max6639_data *data;
 523        struct device *hwmon_dev;
 524        int err;
 525
 526        data = devm_kzalloc(dev, sizeof(struct max6639_data), GFP_KERNEL);
 527        if (!data)
 528                return -ENOMEM;
 529
 530        data->client = client;
 531        mutex_init(&data->update_lock);
 532
 533        /* Initialize the max6639 chip */
 534        err = max6639_init_client(client, data);
 535        if (err < 0)
 536                return err;
 537
 538        hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 539                                                           data,
 540                                                           max6639_groups);
 541        return PTR_ERR_OR_ZERO(hwmon_dev);
 542}
 543
 544#ifdef CONFIG_PM_SLEEP
 545static int max6639_suspend(struct device *dev)
 546{
 547        struct i2c_client *client = to_i2c_client(dev);
 548        int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
 549        if (data < 0)
 550                return data;
 551
 552        return i2c_smbus_write_byte_data(client,
 553                        MAX6639_REG_GCONFIG, data | MAX6639_GCONFIG_STANDBY);
 554}
 555
 556static int max6639_resume(struct device *dev)
 557{
 558        struct i2c_client *client = to_i2c_client(dev);
 559        int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
 560        if (data < 0)
 561                return data;
 562
 563        return i2c_smbus_write_byte_data(client,
 564                        MAX6639_REG_GCONFIG, data & ~MAX6639_GCONFIG_STANDBY);
 565}
 566#endif /* CONFIG_PM_SLEEP */
 567
 568static const struct i2c_device_id max6639_id[] = {
 569        {"max6639", 0},
 570        { }
 571};
 572
 573MODULE_DEVICE_TABLE(i2c, max6639_id);
 574
 575static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume);
 576
 577static struct i2c_driver max6639_driver = {
 578        .class = I2C_CLASS_HWMON,
 579        .driver = {
 580                   .name = "max6639",
 581                   .pm = &max6639_pm_ops,
 582                   },
 583        .probe_new = max6639_probe,
 584        .id_table = max6639_id,
 585        .detect = max6639_detect,
 586        .address_list = normal_i2c,
 587};
 588
 589module_i2c_driver(max6639_driver);
 590
 591MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
 592MODULE_DESCRIPTION("max6639 driver");
 593MODULE_LICENSE("GPL");
 594