linux/drivers/power/supply/sbs-battery.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Gas Gauge driver for SBS Compliant Batteries
   4 *
   5 * Copyright (c) 2010, NVIDIA Corporation.
   6 */
   7
   8#include <linux/bits.h>
   9#include <linux/delay.h>
  10#include <linux/devm-helpers.h>
  11#include <linux/err.h>
  12#include <linux/gpio/consumer.h>
  13#include <linux/i2c.h>
  14#include <linux/init.h>
  15#include <linux/interrupt.h>
  16#include <linux/kernel.h>
  17#include <linux/module.h>
  18#include <linux/property.h>
  19#include <linux/of_device.h>
  20#include <linux/power/sbs-battery.h>
  21#include <linux/power_supply.h>
  22#include <linux/slab.h>
  23#include <linux/stat.h>
  24
  25enum {
  26        REG_MANUFACTURER_DATA,
  27        REG_BATTERY_MODE,
  28        REG_TEMPERATURE,
  29        REG_VOLTAGE,
  30        REG_CURRENT_NOW,
  31        REG_CURRENT_AVG,
  32        REG_MAX_ERR,
  33        REG_CAPACITY,
  34        REG_TIME_TO_EMPTY_NOW,
  35        REG_TIME_TO_EMPTY_AVG,
  36        REG_TIME_TO_FULL_AVG,
  37        REG_STATUS,
  38        REG_CAPACITY_LEVEL,
  39        REG_CYCLE_COUNT,
  40        REG_SERIAL_NUMBER,
  41        REG_REMAINING_CAPACITY,
  42        REG_REMAINING_CAPACITY_CHARGE,
  43        REG_FULL_CHARGE_CAPACITY,
  44        REG_FULL_CHARGE_CAPACITY_CHARGE,
  45        REG_DESIGN_CAPACITY,
  46        REG_DESIGN_CAPACITY_CHARGE,
  47        REG_DESIGN_VOLTAGE_MIN,
  48        REG_DESIGN_VOLTAGE_MAX,
  49        REG_CHEMISTRY,
  50        REG_MANUFACTURER,
  51        REG_MODEL_NAME,
  52        REG_CHARGE_CURRENT,
  53        REG_CHARGE_VOLTAGE,
  54};
  55
  56#define REG_ADDR_SPEC_INFO              0x1A
  57#define SPEC_INFO_VERSION_MASK          GENMASK(7, 4)
  58#define SPEC_INFO_VERSION_SHIFT         4
  59
  60#define SBS_VERSION_1_0                 1
  61#define SBS_VERSION_1_1                 2
  62#define SBS_VERSION_1_1_WITH_PEC        3
  63
  64#define REG_ADDR_MANUFACTURE_DATE       0x1B
  65
  66/* Battery Mode defines */
  67#define BATTERY_MODE_OFFSET             0x03
  68#define BATTERY_MODE_CAPACITY_MASK      BIT(15)
  69enum sbs_capacity_mode {
  70        CAPACITY_MODE_AMPS = 0,
  71        CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
  72};
  73#define BATTERY_MODE_CHARGER_MASK       (1<<14)
  74
  75/* manufacturer access defines */
  76#define MANUFACTURER_ACCESS_STATUS      0x0006
  77#define MANUFACTURER_ACCESS_SLEEP       0x0011
  78
  79/* battery status value bits */
  80#define BATTERY_INITIALIZED             0x80
  81#define BATTERY_DISCHARGING             0x40
  82#define BATTERY_FULL_CHARGED            0x20
  83#define BATTERY_FULL_DISCHARGED         0x10
  84
  85/* min_value and max_value are only valid for numerical data */
  86#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
  87        .psp = _psp, \
  88        .addr = _addr, \
  89        .min_value = _min_value, \
  90        .max_value = _max_value, \
  91}
  92
  93static const struct chip_data {
  94        enum power_supply_property psp;
  95        u8 addr;
  96        int min_value;
  97        int max_value;
  98} sbs_data[] = {
  99        [REG_MANUFACTURER_DATA] =
 100                SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
 101        [REG_BATTERY_MODE] =
 102                SBS_DATA(-1, 0x03, 0, 65535),
 103        [REG_TEMPERATURE] =
 104                SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
 105        [REG_VOLTAGE] =
 106                SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 65535),
 107        [REG_CURRENT_NOW] =
 108                SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
 109        [REG_CURRENT_AVG] =
 110                SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767),
 111        [REG_MAX_ERR] =
 112                SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100),
 113        [REG_CAPACITY] =
 114                SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100),
 115        [REG_REMAINING_CAPACITY] =
 116                SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
 117        [REG_REMAINING_CAPACITY_CHARGE] =
 118                SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
 119        [REG_FULL_CHARGE_CAPACITY] =
 120                SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
 121        [REG_FULL_CHARGE_CAPACITY_CHARGE] =
 122                SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
 123        [REG_TIME_TO_EMPTY_NOW] =
 124                SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, 0x11, 0, 65535),
 125        [REG_TIME_TO_EMPTY_AVG] =
 126                SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
 127        [REG_TIME_TO_FULL_AVG] =
 128                SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
 129        [REG_CHARGE_CURRENT] =
 130                SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535),
 131        [REG_CHARGE_VOLTAGE] =
 132                SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535),
 133        [REG_STATUS] =
 134                SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
 135        [REG_CAPACITY_LEVEL] =
 136                SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
 137        [REG_CYCLE_COUNT] =
 138                SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
 139        [REG_DESIGN_CAPACITY] =
 140                SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
 141        [REG_DESIGN_CAPACITY_CHARGE] =
 142                SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
 143        [REG_DESIGN_VOLTAGE_MIN] =
 144                SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
 145        [REG_DESIGN_VOLTAGE_MAX] =
 146                SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
 147        [REG_SERIAL_NUMBER] =
 148                SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
 149        /* Properties of type `const char *' */
 150        [REG_MANUFACTURER] =
 151                SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
 152        [REG_MODEL_NAME] =
 153                SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535),
 154        [REG_CHEMISTRY] =
 155                SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535)
 156};
 157
 158static const enum power_supply_property sbs_properties[] = {
 159        POWER_SUPPLY_PROP_STATUS,
 160        POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 161        POWER_SUPPLY_PROP_HEALTH,
 162        POWER_SUPPLY_PROP_PRESENT,
 163        POWER_SUPPLY_PROP_TECHNOLOGY,
 164        POWER_SUPPLY_PROP_CYCLE_COUNT,
 165        POWER_SUPPLY_PROP_VOLTAGE_NOW,
 166        POWER_SUPPLY_PROP_CURRENT_NOW,
 167        POWER_SUPPLY_PROP_CURRENT_AVG,
 168        POWER_SUPPLY_PROP_CAPACITY,
 169        POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN,
 170        POWER_SUPPLY_PROP_TEMP,
 171        POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
 172        POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
 173        POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
 174        POWER_SUPPLY_PROP_SERIAL_NUMBER,
 175        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 176        POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 177        POWER_SUPPLY_PROP_ENERGY_NOW,
 178        POWER_SUPPLY_PROP_ENERGY_FULL,
 179        POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 180        POWER_SUPPLY_PROP_CHARGE_NOW,
 181        POWER_SUPPLY_PROP_CHARGE_FULL,
 182        POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 183        POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 184        POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 185        POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
 186        POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
 187        POWER_SUPPLY_PROP_MANUFACTURE_DAY,
 188        /* Properties of type `const char *' */
 189        POWER_SUPPLY_PROP_MANUFACTURER,
 190        POWER_SUPPLY_PROP_MODEL_NAME
 191};
 192
 193/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
 194#define SBS_FLAGS_TI_BQ20ZX5            BIT(0)
 195
 196static const enum power_supply_property string_properties[] = {
 197        POWER_SUPPLY_PROP_TECHNOLOGY,
 198        POWER_SUPPLY_PROP_MANUFACTURER,
 199        POWER_SUPPLY_PROP_MODEL_NAME,
 200};
 201
 202#define NR_STRING_BUFFERS       ARRAY_SIZE(string_properties)
 203
 204struct sbs_info {
 205        struct i2c_client               *client;
 206        struct power_supply             *power_supply;
 207        bool                            is_present;
 208        struct gpio_desc                *gpio_detect;
 209        bool                            charger_broadcasts;
 210        int                             last_state;
 211        int                             poll_time;
 212        u32                             i2c_retry_count;
 213        u32                             poll_retry_count;
 214        struct delayed_work             work;
 215        struct mutex                    mode_lock;
 216        u32                             flags;
 217        int                             technology;
 218        char                            strings[NR_STRING_BUFFERS][I2C_SMBUS_BLOCK_MAX + 1];
 219};
 220
 221static char *sbs_get_string_buf(struct sbs_info *chip,
 222                                enum power_supply_property psp)
 223{
 224        int i = 0;
 225
 226        for (i = 0; i < NR_STRING_BUFFERS; i++)
 227                if (string_properties[i] == psp)
 228                        return chip->strings[i];
 229
 230        return ERR_PTR(-EINVAL);
 231}
 232
 233static void sbs_invalidate_cached_props(struct sbs_info *chip)
 234{
 235        int i = 0;
 236
 237        chip->technology = -1;
 238
 239        for (i = 0; i < NR_STRING_BUFFERS; i++)
 240                chip->strings[i][0] = 0;
 241}
 242
 243static bool force_load;
 244
 245static int sbs_read_word_data(struct i2c_client *client, u8 address);
 246static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
 247
 248static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
 249{
 250        int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
 251        if (val < 0)
 252                goto exit;
 253
 254        val |= BATTERY_MODE_CHARGER_MASK;
 255
 256        val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
 257
 258exit:
 259        if (val < 0)
 260                dev_err(&chip->client->dev,
 261                        "Failed to disable charger broadcasting: %d\n", val);
 262        else
 263                dev_dbg(&chip->client->dev, "%s\n", __func__);
 264}
 265
 266static int sbs_update_presence(struct sbs_info *chip, bool is_present)
 267{
 268        struct i2c_client *client = chip->client;
 269        int retries = chip->i2c_retry_count;
 270        s32 ret = 0;
 271        u8 version;
 272
 273        if (chip->is_present == is_present)
 274                return 0;
 275
 276        if (!is_present) {
 277                chip->is_present = false;
 278                /* Disable PEC when no device is present */
 279                client->flags &= ~I2C_CLIENT_PEC;
 280                sbs_invalidate_cached_props(chip);
 281                return 0;
 282        }
 283
 284        /* Check if device supports packet error checking and use it */
 285        while (retries > 0) {
 286                ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
 287                if (ret >= 0)
 288                        break;
 289
 290                /*
 291                 * Some batteries trigger the detection pin before the
 292                 * I2C bus is properly connected. This works around the
 293                 * issue.
 294                 */
 295                msleep(100);
 296
 297                retries--;
 298        }
 299
 300        if (ret < 0) {
 301                dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
 302
 303                /* fallback to old behaviour */
 304                client->flags &= ~I2C_CLIENT_PEC;
 305                chip->is_present = true;
 306
 307                return ret;
 308        }
 309
 310        version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
 311
 312        if (version == SBS_VERSION_1_1_WITH_PEC)
 313                client->flags |= I2C_CLIENT_PEC;
 314        else
 315                client->flags &= ~I2C_CLIENT_PEC;
 316
 317        if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel")
 318            && client->flags & I2C_CLIENT_PEC) {
 319                dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n");
 320                client->flags &= ~I2C_CLIENT_PEC;
 321        }
 322
 323        dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
 324                "enabled" : "disabled");
 325
 326        if (!chip->is_present && is_present && !chip->charger_broadcasts)
 327                sbs_disable_charger_broadcasts(chip);
 328
 329        chip->is_present = true;
 330
 331        return 0;
 332}
 333
 334static int sbs_read_word_data(struct i2c_client *client, u8 address)
 335{
 336        struct sbs_info *chip = i2c_get_clientdata(client);
 337        int retries = chip->i2c_retry_count;
 338        s32 ret = 0;
 339
 340        while (retries > 0) {
 341                ret = i2c_smbus_read_word_data(client, address);
 342                if (ret >= 0)
 343                        break;
 344                retries--;
 345        }
 346
 347        if (ret < 0) {
 348                dev_dbg(&client->dev,
 349                        "%s: i2c read at address 0x%x failed\n",
 350                        __func__, address);
 351                return ret;
 352        }
 353
 354        return ret;
 355}
 356
 357static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
 358{
 359        struct sbs_info *chip = i2c_get_clientdata(client);
 360        s32 ret = 0, block_length = 0;
 361        int retries_length, retries_block;
 362        u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 363
 364        retries_length = chip->i2c_retry_count;
 365        retries_block = chip->i2c_retry_count;
 366
 367        dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
 368                                    "Fallback method does not support PEC.\n");
 369
 370        /* Adapter needs to support these two functions */
 371        if (!i2c_check_functionality(client->adapter,
 372                                     I2C_FUNC_SMBUS_BYTE_DATA |
 373                                     I2C_FUNC_SMBUS_I2C_BLOCK)){
 374                return -ENODEV;
 375        }
 376
 377        /* Get the length of block data */
 378        while (retries_length > 0) {
 379                ret = i2c_smbus_read_byte_data(client, address);
 380                if (ret >= 0)
 381                        break;
 382                retries_length--;
 383        }
 384
 385        if (ret < 0) {
 386                dev_dbg(&client->dev,
 387                        "%s: i2c read at address 0x%x failed\n",
 388                        __func__, address);
 389                return ret;
 390        }
 391
 392        /* block_length does not include NULL terminator */
 393        block_length = ret;
 394        if (block_length > I2C_SMBUS_BLOCK_MAX) {
 395                dev_err(&client->dev,
 396                        "%s: Returned block_length is longer than 0x%x\n",
 397                        __func__, I2C_SMBUS_BLOCK_MAX);
 398                return -EINVAL;
 399        }
 400
 401        /* Get the block data */
 402        while (retries_block > 0) {
 403                ret = i2c_smbus_read_i2c_block_data(
 404                                client, address,
 405                                block_length + 1, block_buffer);
 406                if (ret >= 0)
 407                        break;
 408                retries_block--;
 409        }
 410
 411        if (ret < 0) {
 412                dev_dbg(&client->dev,
 413                        "%s: i2c read at address 0x%x failed\n",
 414                        __func__, address);
 415                return ret;
 416        }
 417
 418        /* block_buffer[0] == block_length */
 419        memcpy(values, block_buffer + 1, block_length);
 420        values[block_length] = '\0';
 421
 422        return ret;
 423}
 424
 425static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
 426{
 427        struct sbs_info *chip = i2c_get_clientdata(client);
 428        int retries = chip->i2c_retry_count;
 429        int ret = 0;
 430
 431        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
 432                bool pec = client->flags & I2C_CLIENT_PEC;
 433                client->flags &= ~I2C_CLIENT_PEC;
 434                ret = sbs_read_string_data_fallback(client, address, values);
 435                if (pec)
 436                        client->flags |= I2C_CLIENT_PEC;
 437                return ret;
 438        }
 439
 440        while (retries > 0) {
 441                ret = i2c_smbus_read_block_data(client, address, values);
 442                if (ret >= 0)
 443                        break;
 444                retries--;
 445        }
 446
 447        if (ret < 0) {
 448                dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
 449                return ret;
 450        }
 451
 452        /* add string termination */
 453        values[ret] = '\0';
 454        return ret;
 455}
 456
 457static int sbs_write_word_data(struct i2c_client *client, u8 address,
 458        u16 value)
 459{
 460        struct sbs_info *chip = i2c_get_clientdata(client);
 461        int retries = chip->i2c_retry_count;
 462        s32 ret = 0;
 463
 464        while (retries > 0) {
 465                ret = i2c_smbus_write_word_data(client, address, value);
 466                if (ret >= 0)
 467                        break;
 468                retries--;
 469        }
 470
 471        if (ret < 0) {
 472                dev_dbg(&client->dev,
 473                        "%s: i2c write to address 0x%x failed\n",
 474                        __func__, address);
 475                return ret;
 476        }
 477
 478        return 0;
 479}
 480
 481static int sbs_status_correct(struct i2c_client *client, int *intval)
 482{
 483        int ret;
 484
 485        ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr);
 486        if (ret < 0)
 487                return ret;
 488
 489        ret = (s16)ret;
 490
 491        /* Not drawing current -> not charging (i.e. idle) */
 492        if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0)
 493                *intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 494
 495        if (*intval == POWER_SUPPLY_STATUS_FULL) {
 496                /* Drawing or providing current when full */
 497                if (ret > 0)
 498                        *intval = POWER_SUPPLY_STATUS_CHARGING;
 499                else if (ret < 0)
 500                        *intval = POWER_SUPPLY_STATUS_DISCHARGING;
 501        }
 502
 503        return 0;
 504}
 505
 506static bool sbs_bat_needs_calibration(struct i2c_client *client)
 507{
 508        int ret;
 509
 510        ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr);
 511        if (ret < 0)
 512                return false;
 513
 514        return !!(ret & BIT(7));
 515}
 516
 517static int sbs_get_ti_battery_presence_and_health(
 518        struct i2c_client *client, enum power_supply_property psp,
 519        union power_supply_propval *val)
 520{
 521        s32 ret;
 522
 523        /*
 524         * Write to ManufacturerAccess with ManufacturerAccess command
 525         * and then read the status.
 526         */
 527        ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
 528                                  MANUFACTURER_ACCESS_STATUS);
 529        if (ret < 0) {
 530                if (psp == POWER_SUPPLY_PROP_PRESENT)
 531                        val->intval = 0; /* battery removed */
 532                return ret;
 533        }
 534
 535        ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
 536        if (ret < 0) {
 537                if (psp == POWER_SUPPLY_PROP_PRESENT)
 538                        val->intval = 0; /* battery removed */
 539                return ret;
 540        }
 541
 542        if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
 543            ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
 544                val->intval = 0;
 545                return 0;
 546        }
 547
 548        /* Mask the upper nibble of 2nd byte and
 549         * lower byte of response then
 550         * shift the result by 8 to get status*/
 551        ret &= 0x0F00;
 552        ret >>= 8;
 553        if (psp == POWER_SUPPLY_PROP_PRESENT) {
 554                if (ret == 0x0F)
 555                        /* battery removed */
 556                        val->intval = 0;
 557                else
 558                        val->intval = 1;
 559        } else if (psp == POWER_SUPPLY_PROP_HEALTH) {
 560                if (ret == 0x09)
 561                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 562                else if (ret == 0x0B)
 563                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
 564                else if (ret == 0x0C)
 565                        val->intval = POWER_SUPPLY_HEALTH_DEAD;
 566                else if (sbs_bat_needs_calibration(client))
 567                        val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
 568                else
 569                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
 570        }
 571
 572        return 0;
 573}
 574
 575static int sbs_get_battery_presence_and_health(
 576        struct i2c_client *client, enum power_supply_property psp,
 577        union power_supply_propval *val)
 578{
 579        struct sbs_info *chip = i2c_get_clientdata(client);
 580        int ret;
 581
 582        if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
 583                return sbs_get_ti_battery_presence_and_health(client, psp, val);
 584
 585        /* Dummy command; if it succeeds, battery is present. */
 586        ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
 587
 588        if (ret < 0) { /* battery not present*/
 589                if (psp == POWER_SUPPLY_PROP_PRESENT) {
 590                        val->intval = 0;
 591                        return 0;
 592                }
 593                return ret;
 594        }
 595
 596        if (psp == POWER_SUPPLY_PROP_PRESENT)
 597                val->intval = 1; /* battery present */
 598        else { /* POWER_SUPPLY_PROP_HEALTH */
 599                if (sbs_bat_needs_calibration(client)) {
 600                        val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
 601                } else {
 602                        /* SBS spec doesn't have a general health command. */
 603                        val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
 604                }
 605        }
 606
 607        return 0;
 608}
 609
 610static int sbs_get_battery_property(struct i2c_client *client,
 611        int reg_offset, enum power_supply_property psp,
 612        union power_supply_propval *val)
 613{
 614        struct sbs_info *chip = i2c_get_clientdata(client);
 615        s32 ret;
 616
 617        ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
 618        if (ret < 0)
 619                return ret;
 620
 621        /* returned values are 16 bit */
 622        if (sbs_data[reg_offset].min_value < 0)
 623                ret = (s16)ret;
 624
 625        if (ret >= sbs_data[reg_offset].min_value &&
 626            ret <= sbs_data[reg_offset].max_value) {
 627                val->intval = ret;
 628                if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
 629                        if (!(ret & BATTERY_INITIALIZED))
 630                                val->intval =
 631                                        POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
 632                        else if (ret & BATTERY_FULL_CHARGED)
 633                                val->intval =
 634                                        POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 635                        else if (ret & BATTERY_FULL_DISCHARGED)
 636                                val->intval =
 637                                        POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 638                        else
 639                                val->intval =
 640                                        POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 641                        return 0;
 642                } else if (psp != POWER_SUPPLY_PROP_STATUS) {
 643                        return 0;
 644                }
 645
 646                if (ret & BATTERY_FULL_CHARGED)
 647                        val->intval = POWER_SUPPLY_STATUS_FULL;
 648                else if (ret & BATTERY_DISCHARGING)
 649                        val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 650                else
 651                        val->intval = POWER_SUPPLY_STATUS_CHARGING;
 652
 653                sbs_status_correct(client, &val->intval);
 654
 655                if (chip->poll_time == 0)
 656                        chip->last_state = val->intval;
 657                else if (chip->last_state != val->intval) {
 658                        cancel_delayed_work_sync(&chip->work);
 659                        power_supply_changed(chip->power_supply);
 660                        chip->poll_time = 0;
 661                }
 662        } else {
 663                if (psp == POWER_SUPPLY_PROP_STATUS)
 664                        val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 665                else if (psp == POWER_SUPPLY_PROP_CAPACITY)
 666                        /* sbs spec says that this can be >100 %
 667                         * even if max value is 100 %
 668                         */
 669                        val->intval = min(ret, 100);
 670                else
 671                        val->intval = 0;
 672        }
 673
 674        return 0;
 675}
 676
 677static int sbs_get_property_index(struct i2c_client *client,
 678        enum power_supply_property psp)
 679{
 680        int count;
 681
 682        for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
 683                if (psp == sbs_data[count].psp)
 684                        return count;
 685
 686        dev_warn(&client->dev,
 687                "%s: Invalid Property - %d\n", __func__, psp);
 688
 689        return -EINVAL;
 690}
 691
 692static const char *sbs_get_constant_string(struct sbs_info *chip,
 693                        enum power_supply_property psp)
 694{
 695        int ret;
 696        char *buf;
 697        u8 addr;
 698
 699        buf = sbs_get_string_buf(chip, psp);
 700        if (IS_ERR(buf))
 701                return buf;
 702
 703        if (!buf[0]) {
 704                ret = sbs_get_property_index(chip->client, psp);
 705                if (ret < 0)
 706                        return ERR_PTR(ret);
 707
 708                addr = sbs_data[ret].addr;
 709
 710                ret = sbs_read_string_data(chip->client, addr, buf);
 711                if (ret < 0)
 712                        return ERR_PTR(ret);
 713        }
 714
 715        return buf;
 716}
 717
 718static void  sbs_unit_adjustment(struct i2c_client *client,
 719        enum power_supply_property psp, union power_supply_propval *val)
 720{
 721#define BASE_UNIT_CONVERSION            1000
 722#define BATTERY_MODE_CAP_MULT_WATT      (10 * BASE_UNIT_CONVERSION)
 723#define TIME_UNIT_CONVERSION            60
 724#define TEMP_KELVIN_TO_CELSIUS          2731
 725        switch (psp) {
 726        case POWER_SUPPLY_PROP_ENERGY_NOW:
 727        case POWER_SUPPLY_PROP_ENERGY_FULL:
 728        case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
 729                /* sbs provides energy in units of 10mWh.
 730                 * Convert to µWh
 731                 */
 732                val->intval *= BATTERY_MODE_CAP_MULT_WATT;
 733                break;
 734
 735        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 736        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 737        case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 738        case POWER_SUPPLY_PROP_CURRENT_NOW:
 739        case POWER_SUPPLY_PROP_CURRENT_AVG:
 740        case POWER_SUPPLY_PROP_CHARGE_NOW:
 741        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 742        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 743        case POWER_SUPPLY_PROP_CHARGE_FULL:
 744        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 745                val->intval *= BASE_UNIT_CONVERSION;
 746                break;
 747
 748        case POWER_SUPPLY_PROP_TEMP:
 749                /* sbs provides battery temperature in 0.1K
 750                 * so convert it to 0.1°C
 751                 */
 752                val->intval -= TEMP_KELVIN_TO_CELSIUS;
 753                break;
 754
 755        case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
 756        case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 757        case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
 758                /* sbs provides time to empty and time to full in minutes.
 759                 * Convert to seconds
 760                 */
 761                val->intval *= TIME_UNIT_CONVERSION;
 762                break;
 763
 764        default:
 765                dev_dbg(&client->dev,
 766                        "%s: no need for unit conversion %d\n", __func__, psp);
 767        }
 768}
 769
 770static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
 771        enum sbs_capacity_mode mode)
 772{
 773        int ret, original_val;
 774
 775        original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
 776        if (original_val < 0)
 777                return original_val;
 778
 779        if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
 780                return mode;
 781
 782        if (mode == CAPACITY_MODE_AMPS)
 783                ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
 784        else
 785                ret = original_val | BATTERY_MODE_CAPACITY_MASK;
 786
 787        ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
 788        if (ret < 0)
 789                return ret;
 790
 791        usleep_range(1000, 2000);
 792
 793        return original_val & BATTERY_MODE_CAPACITY_MASK;
 794}
 795
 796static int sbs_get_battery_capacity(struct i2c_client *client,
 797        int reg_offset, enum power_supply_property psp,
 798        union power_supply_propval *val)
 799{
 800        s32 ret;
 801        enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
 802
 803        if (power_supply_is_amp_property(psp))
 804                mode = CAPACITY_MODE_AMPS;
 805
 806        mode = sbs_set_capacity_mode(client, mode);
 807        if ((int)mode < 0)
 808                return mode;
 809
 810        ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
 811        if (ret < 0)
 812                return ret;
 813
 814        val->intval = ret;
 815
 816        ret = sbs_set_capacity_mode(client, mode);
 817        if (ret < 0)
 818                return ret;
 819
 820        return 0;
 821}
 822
 823static char sbs_serial[5];
 824static int sbs_get_battery_serial_number(struct i2c_client *client,
 825        union power_supply_propval *val)
 826{
 827        int ret;
 828
 829        ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
 830        if (ret < 0)
 831                return ret;
 832
 833        sprintf(sbs_serial, "%04x", ret);
 834        val->strval = sbs_serial;
 835
 836        return 0;
 837}
 838
 839static int sbs_get_chemistry(struct sbs_info *chip,
 840                union power_supply_propval *val)
 841{
 842        const char *chemistry;
 843
 844        if (chip->technology != -1) {
 845                val->intval = chip->technology;
 846                return 0;
 847        }
 848
 849        chemistry = sbs_get_constant_string(chip, POWER_SUPPLY_PROP_TECHNOLOGY);
 850
 851        if (IS_ERR(chemistry))
 852                return PTR_ERR(chemistry);
 853
 854        if (!strncasecmp(chemistry, "LION", 4))
 855                chip->technology = POWER_SUPPLY_TECHNOLOGY_LION;
 856        else if (!strncasecmp(chemistry, "LiP", 3))
 857                chip->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
 858        else if (!strncasecmp(chemistry, "NiCd", 4))
 859                chip->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
 860        else if (!strncasecmp(chemistry, "NiMH", 4))
 861                chip->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
 862        else
 863                chip->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
 864
 865        if (chip->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
 866                dev_warn(&chip->client->dev, "Unknown chemistry: %s\n", chemistry);
 867
 868        val->intval = chip->technology;
 869
 870        return 0;
 871}
 872
 873static int sbs_get_battery_manufacture_date(struct i2c_client *client,
 874        enum power_supply_property psp,
 875        union power_supply_propval *val)
 876{
 877        int ret;
 878        u16 day, month, year;
 879
 880        ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE);
 881        if (ret < 0)
 882                return ret;
 883
 884        day   = ret   & GENMASK(4,  0);
 885        month = (ret  & GENMASK(8,  5)) >> 5;
 886        year  = ((ret & GENMASK(15, 9)) >> 9) + 1980;
 887
 888        switch (psp) {
 889        case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
 890                val->intval = year;
 891                break;
 892        case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
 893                val->intval = month;
 894                break;
 895        case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
 896                val->intval = day;
 897                break;
 898        default:
 899                return -EINVAL;
 900        }
 901
 902        return 0;
 903}
 904
 905static int sbs_get_property(struct power_supply *psy,
 906        enum power_supply_property psp,
 907        union power_supply_propval *val)
 908{
 909        int ret = 0;
 910        struct sbs_info *chip = power_supply_get_drvdata(psy);
 911        struct i2c_client *client = chip->client;
 912        const char *str;
 913
 914        if (chip->gpio_detect) {
 915                ret = gpiod_get_value_cansleep(chip->gpio_detect);
 916                if (ret < 0)
 917                        return ret;
 918                if (psp == POWER_SUPPLY_PROP_PRESENT) {
 919                        val->intval = ret;
 920                        sbs_update_presence(chip, ret);
 921                        return 0;
 922                }
 923                if (ret == 0)
 924                        return -ENODATA;
 925        }
 926
 927        switch (psp) {
 928        case POWER_SUPPLY_PROP_PRESENT:
 929        case POWER_SUPPLY_PROP_HEALTH:
 930                ret = sbs_get_battery_presence_and_health(client, psp, val);
 931
 932                /* this can only be true if no gpio is used */
 933                if (psp == POWER_SUPPLY_PROP_PRESENT)
 934                        return 0;
 935                break;
 936
 937        case POWER_SUPPLY_PROP_TECHNOLOGY:
 938                ret = sbs_get_chemistry(chip, val);
 939                if (ret < 0)
 940                        break;
 941
 942                goto done; /* don't trigger power_supply_changed()! */
 943
 944        case POWER_SUPPLY_PROP_ENERGY_NOW:
 945        case POWER_SUPPLY_PROP_ENERGY_FULL:
 946        case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
 947        case POWER_SUPPLY_PROP_CHARGE_NOW:
 948        case POWER_SUPPLY_PROP_CHARGE_FULL:
 949        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 950                ret = sbs_get_property_index(client, psp);
 951                if (ret < 0)
 952                        break;
 953
 954                /* sbs_get_battery_capacity() will change the battery mode
 955                 * temporarily to read the requested attribute. Ensure we stay
 956                 * in the desired mode for the duration of the attribute read.
 957                 */
 958                mutex_lock(&chip->mode_lock);
 959                ret = sbs_get_battery_capacity(client, ret, psp, val);
 960                mutex_unlock(&chip->mode_lock);
 961                break;
 962
 963        case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 964                ret = sbs_get_battery_serial_number(client, val);
 965                break;
 966
 967        case POWER_SUPPLY_PROP_STATUS:
 968        case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 969        case POWER_SUPPLY_PROP_CYCLE_COUNT:
 970        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 971        case POWER_SUPPLY_PROP_CURRENT_NOW:
 972        case POWER_SUPPLY_PROP_CURRENT_AVG:
 973        case POWER_SUPPLY_PROP_TEMP:
 974        case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
 975        case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 976        case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
 977        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 978        case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 979        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 980        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 981        case POWER_SUPPLY_PROP_CAPACITY:
 982        case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN:
 983                ret = sbs_get_property_index(client, psp);
 984                if (ret < 0)
 985                        break;
 986
 987                ret = sbs_get_battery_property(client, ret, psp, val);
 988                break;
 989
 990        case POWER_SUPPLY_PROP_MODEL_NAME:
 991        case POWER_SUPPLY_PROP_MANUFACTURER:
 992                str = sbs_get_constant_string(chip, psp);
 993                if (IS_ERR(str))
 994                        ret = PTR_ERR(str);
 995                else
 996                        val->strval = str;
 997                break;
 998
 999        case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
1000        case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
1001        case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
1002                ret = sbs_get_battery_manufacture_date(client, psp, val);
1003                break;
1004
1005        default:
1006                dev_err(&client->dev,
1007                        "%s: INVALID property\n", __func__);
1008                return -EINVAL;
1009        }
1010
1011        if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
1012                bool old_present = chip->is_present;
1013                union power_supply_propval val;
1014                int err = sbs_get_battery_presence_and_health(
1015                                client, POWER_SUPPLY_PROP_PRESENT, &val);
1016
1017                sbs_update_presence(chip, !err && val.intval);
1018
1019                if (old_present != chip->is_present)
1020                        power_supply_changed(chip->power_supply);
1021        }
1022
1023done:
1024        if (!ret) {
1025                /* Convert units to match requirements for power supply class */
1026                sbs_unit_adjustment(client, psp, val);
1027                dev_dbg(&client->dev,
1028                        "%s: property = %d, value = %x\n", __func__,
1029                        psp, val->intval);
1030        } else if (!chip->is_present)  {
1031                /* battery not present, so return NODATA for properties */
1032                ret = -ENODATA;
1033        }
1034        return ret;
1035}
1036
1037static void sbs_supply_changed(struct sbs_info *chip)
1038{
1039        struct power_supply *battery = chip->power_supply;
1040        int ret;
1041
1042        ret = gpiod_get_value_cansleep(chip->gpio_detect);
1043        if (ret < 0)
1044                return;
1045        sbs_update_presence(chip, ret);
1046        power_supply_changed(battery);
1047}
1048
1049static irqreturn_t sbs_irq(int irq, void *devid)
1050{
1051        sbs_supply_changed(devid);
1052        return IRQ_HANDLED;
1053}
1054
1055static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
1056        unsigned int data)
1057{
1058        sbs_supply_changed(i2c_get_clientdata(client));
1059}
1060
1061static void sbs_external_power_changed(struct power_supply *psy)
1062{
1063        struct sbs_info *chip = power_supply_get_drvdata(psy);
1064
1065        /* cancel outstanding work */
1066        cancel_delayed_work_sync(&chip->work);
1067
1068        schedule_delayed_work(&chip->work, HZ);
1069        chip->poll_time = chip->poll_retry_count;
1070}
1071
1072static void sbs_delayed_work(struct work_struct *work)
1073{
1074        struct sbs_info *chip;
1075        s32 ret;
1076
1077        chip = container_of(work, struct sbs_info, work.work);
1078
1079        ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
1080        /* if the read failed, give up on this work */
1081        if (ret < 0) {
1082                chip->poll_time = 0;
1083                return;
1084        }
1085
1086        if (ret & BATTERY_FULL_CHARGED)
1087                ret = POWER_SUPPLY_STATUS_FULL;
1088        else if (ret & BATTERY_DISCHARGING)
1089                ret = POWER_SUPPLY_STATUS_DISCHARGING;
1090        else
1091                ret = POWER_SUPPLY_STATUS_CHARGING;
1092
1093        sbs_status_correct(chip->client, &ret);
1094
1095        if (chip->last_state != ret) {
1096                chip->poll_time = 0;
1097                power_supply_changed(chip->power_supply);
1098                return;
1099        }
1100        if (chip->poll_time > 0) {
1101                schedule_delayed_work(&chip->work, HZ);
1102                chip->poll_time--;
1103                return;
1104        }
1105}
1106
1107static const struct power_supply_desc sbs_default_desc = {
1108        .type = POWER_SUPPLY_TYPE_BATTERY,
1109        .properties = sbs_properties,
1110        .num_properties = ARRAY_SIZE(sbs_properties),
1111        .get_property = sbs_get_property,
1112        .external_power_changed = sbs_external_power_changed,
1113};
1114
1115static int sbs_probe(struct i2c_client *client)
1116{
1117        struct sbs_info *chip;
1118        struct power_supply_desc *sbs_desc;
1119        struct sbs_platform_data *pdata = client->dev.platform_data;
1120        struct power_supply_config psy_cfg = {};
1121        int rc;
1122        int irq;
1123
1124        sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
1125                        sizeof(*sbs_desc), GFP_KERNEL);
1126        if (!sbs_desc)
1127                return -ENOMEM;
1128
1129        sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s",
1130                        dev_name(&client->dev));
1131        if (!sbs_desc->name)
1132                return -ENOMEM;
1133
1134        chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
1135        if (!chip)
1136                return -ENOMEM;
1137
1138        chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
1139        chip->client = client;
1140        psy_cfg.of_node = client->dev.of_node;
1141        psy_cfg.drv_data = chip;
1142        chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
1143        sbs_invalidate_cached_props(chip);
1144        mutex_init(&chip->mode_lock);
1145
1146        /* use pdata if available, fall back to DT properties,
1147         * or hardcoded defaults if not
1148         */
1149        rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count",
1150                                      &chip->i2c_retry_count);
1151        if (rc)
1152                chip->i2c_retry_count = 0;
1153
1154        rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count",
1155                                      &chip->poll_retry_count);
1156        if (rc)
1157                chip->poll_retry_count = 0;
1158
1159        if (pdata) {
1160                chip->poll_retry_count = pdata->poll_retry_count;
1161                chip->i2c_retry_count  = pdata->i2c_retry_count;
1162        }
1163        chip->i2c_retry_count = chip->i2c_retry_count + 1;
1164
1165        chip->charger_broadcasts = !device_property_read_bool(&client->dev,
1166                                        "sbs,disable-charger-broadcasts");
1167
1168        chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
1169                        "sbs,battery-detect", GPIOD_IN);
1170        if (IS_ERR(chip->gpio_detect))
1171                return dev_err_probe(&client->dev, PTR_ERR(chip->gpio_detect),
1172                                     "Failed to get gpio\n");
1173
1174        i2c_set_clientdata(client, chip);
1175
1176        if (!chip->gpio_detect)
1177                goto skip_gpio;
1178
1179        irq = gpiod_to_irq(chip->gpio_detect);
1180        if (irq <= 0) {
1181                dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
1182                goto skip_gpio;
1183        }
1184
1185        rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
1186                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
1187                dev_name(&client->dev), chip);
1188        if (rc) {
1189                dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
1190                goto skip_gpio;
1191        }
1192
1193skip_gpio:
1194        /*
1195         * Before we register, we might need to make sure we can actually talk
1196         * to the battery.
1197         */
1198        if (!(force_load || chip->gpio_detect)) {
1199                union power_supply_propval val;
1200
1201                rc = sbs_get_battery_presence_and_health(
1202                                client, POWER_SUPPLY_PROP_PRESENT, &val);
1203                if (rc < 0 || !val.intval)
1204                        return dev_err_probe(&client->dev, -ENODEV,
1205                                             "Failed to get present status\n");
1206        }
1207
1208        rc = devm_delayed_work_autocancel(&client->dev, &chip->work,
1209                                          sbs_delayed_work);
1210        if (rc)
1211                return rc;
1212
1213        chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
1214                                                   &psy_cfg);
1215        if (IS_ERR(chip->power_supply))
1216                return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply),
1217                                     "Failed to register power supply\n");
1218
1219        dev_info(&client->dev,
1220                "%s: battery gas gauge device registered\n", client->name);
1221
1222        return 0;
1223}
1224
1225#if defined CONFIG_PM_SLEEP
1226
1227static int sbs_suspend(struct device *dev)
1228{
1229        struct i2c_client *client = to_i2c_client(dev);
1230        struct sbs_info *chip = i2c_get_clientdata(client);
1231        int ret;
1232
1233        if (chip->poll_time > 0)
1234                cancel_delayed_work_sync(&chip->work);
1235
1236        if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
1237                /* Write to manufacturer access with sleep command. */
1238                ret = sbs_write_word_data(client,
1239                                          sbs_data[REG_MANUFACTURER_DATA].addr,
1240                                          MANUFACTURER_ACCESS_SLEEP);
1241                if (chip->is_present && ret < 0)
1242                        return ret;
1243        }
1244
1245        return 0;
1246}
1247
1248static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
1249#define SBS_PM_OPS (&sbs_pm_ops)
1250
1251#else
1252#define SBS_PM_OPS NULL
1253#endif
1254
1255static const struct i2c_device_id sbs_id[] = {
1256        { "bq20z65", 0 },
1257        { "bq20z75", 0 },
1258        { "sbs-battery", 1 },
1259        {}
1260};
1261MODULE_DEVICE_TABLE(i2c, sbs_id);
1262
1263static const struct of_device_id sbs_dt_ids[] = {
1264        { .compatible = "sbs,sbs-battery" },
1265        {
1266                .compatible = "ti,bq20z65",
1267                .data = (void *)SBS_FLAGS_TI_BQ20ZX5,
1268        },
1269        {
1270                .compatible = "ti,bq20z75",
1271                .data = (void *)SBS_FLAGS_TI_BQ20ZX5,
1272        },
1273        { }
1274};
1275MODULE_DEVICE_TABLE(of, sbs_dt_ids);
1276
1277static struct i2c_driver sbs_battery_driver = {
1278        .probe_new      = sbs_probe,
1279        .alert          = sbs_alert,
1280        .id_table       = sbs_id,
1281        .driver = {
1282                .name   = "sbs-battery",
1283                .of_match_table = sbs_dt_ids,
1284                .pm     = SBS_PM_OPS,
1285        },
1286};
1287module_i2c_driver(sbs_battery_driver);
1288
1289MODULE_DESCRIPTION("SBS battery monitor driver");
1290MODULE_LICENSE("GPL");
1291
1292module_param(force_load, bool, 0444);
1293MODULE_PARM_DESC(force_load,
1294                 "Attempt to load the driver even if no battery is connected");
1295