/*
 * Scsi Host Layer for MPT (Message Passing Technology) based controllers
 *
 * Copyright (C) 2012-2014  LSI Corporation
 * Copyright (C) 2013-2015 Avago Technologies
 *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * NO WARRANTY
 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
 * solely responsible for determining the appropriateness of using and
 * distributing the Program and assumes all risks associated with its
 * exercise of rights under this Agreement, including but not limited to
 * the risks and costs of program errors, damage to or loss of data,
 * programs or equipment, and unavailability or interruption of operations.

 * DISCLAIMER OF LIABILITY
 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

 * You should have received a copy of the GNU General Public License
 * along with this program.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <asm/unaligned.h>

#include "mpt3sas_base.h"

/**
 * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
 * @ioc: per adapter object
 */
static void
_warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
{
        Mpi2RaidVolPage1_t vol_pg1;
        Mpi2ConfigReply_t mpi_reply;
        struct _raid_device *raid_device;
        u16 handle;
        u16 ioc_status;
        unsigned long flags;

        handle = 0xFFFF;
        while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
            &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
                ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
                    MPI2_IOCSTATUS_MASK;
                if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
                        break;
                handle = le16_to_cpu(vol_pg1.DevHandle);
                spin_lock_irqsave(&ioc->raid_device_lock, flags);
                raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
                if (raid_device)
                        raid_device->direct_io_enabled = 0;
                spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
        }
        return;
}


/**
 * mpt3sas_get_num_volumes - Get number of volumes in the ioc
 * @ioc: per adapter object
 */
u8
mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
{
        Mpi2RaidVolPage1_t vol_pg1;
        Mpi2ConfigReply_t mpi_reply;
        u16 handle;
        u8 vol_cnt = 0;
        u16 ioc_status;

        handle = 0xFFFF;
        while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
            &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
                ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
                    MPI2_IOCSTATUS_MASK;
                if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
                        break;
                vol_cnt++;
                handle = le16_to_cpu(vol_pg1.DevHandle);
        }
        return vol_cnt;
}


/**
 * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
 * @ioc: per adapter object
 * @raid_device: the raid_device object
 */
void
mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
        struct _raid_device *raid_device)
{
        Mpi2RaidVolPage0_t *vol_pg0;
        Mpi2RaidPhysDiskPage0_t pd_pg0;
        Mpi2ConfigReply_t mpi_reply;
        u16 sz;
        u8 num_pds, count;
        unsigned long stripe_sz, block_sz;
        u8 stripe_exp, block_exp;
        u64 dev_max_lba;

        if (!ioc->is_warpdrive)
                return;

        if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as drives are exposed\n");
                return;
        }
        if (mpt3sas_get_num_volumes(ioc) > 1) {
                _warpdrive_disable_ddio(ioc);
                ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as number of drives > 1\n");
                return;
        }
        if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
            &num_pds)) || !num_pds) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in computing number of drives\n");
                return;
        }

        sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
            sizeof(Mpi2RaidVol0PhysDisk_t));
        vol_pg0 = kzalloc(sz, GFP_KERNEL);
        if (!vol_pg0) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
                return;
        }

        if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
             MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in retrieving RVPG0\n");
                kfree(vol_pg0);
                return;
        }

        /*
         * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
         * assumed for WARPDRIVE, disable direct I/O
         */
        if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
                ioc_warn(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): num_mem=%d, max_mem_allowed=%d\n",
                         raid_device->handle, num_pds, MPT_MAX_WARPDRIVE_PDS);
                kfree(vol_pg0);
                return;
        }
        for (count = 0; count < num_pds; count++) {
                if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
                    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
                    vol_pg0->PhysDisk[count].PhysDiskNum) ||
                    le16_to_cpu(pd_pg0.DevHandle) ==
                    MPT3SAS_INVALID_DEVICE_HANDLE) {
                        ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle retrieval failed for member number=%d\n",
                                 raid_device->handle,
                                 vol_pg0->PhysDisk[count].PhysDiskNum);
                        goto out_error;
                }
                /* Disable direct I/O if member drive lba exceeds 4 bytes */
                dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
                if (dev_max_lba >> 32) {
                        ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle (0x%04x) unsupported max lba 0x%016llx\n",
                                 raid_device->handle,
                                 le16_to_cpu(pd_pg0.DevHandle),
                                 (u64)dev_max_lba);
                        goto out_error;
                }

                raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
        }

        /*
         * Assumption for WD: Direct I/O is not supported if the volume is
         * not RAID0
         */
        if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): type=%d, s_sz=%uK, blk_size=%u\n",
                         raid_device->handle, raid_device->volume_type,
                         (le32_to_cpu(vol_pg0->StripeSize) *
                          le16_to_cpu(vol_pg0->BlockSize)) / 1024,
                         le16_to_cpu(vol_pg0->BlockSize));
                goto out_error;
        }

        stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
        stripe_exp = find_first_bit(&stripe_sz, 32);
        if (stripe_exp == 32) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid stripe sz %uK\n",
                         raid_device->handle,
                         (le32_to_cpu(vol_pg0->StripeSize) *
                          le16_to_cpu(vol_pg0->BlockSize)) / 1024);
                goto out_error;
        }
        raid_device->stripe_exponent = stripe_exp;
        block_sz = le16_to_cpu(vol_pg0->BlockSize);
        block_exp = find_first_bit(&block_sz, 16);
        if (block_exp == 16) {
                ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid block sz %u\n",
                         raid_device->handle, le16_to_cpu(vol_pg0->BlockSize));
                goto out_error;
        }
        raid_device->block_exponent = block_exp;
        raid_device->direct_io_enabled = 1;

        ioc_info(ioc, "WarpDrive : Direct IO is Enabled for the drive with handle(0x%04x)\n",
                 raid_device->handle);
        /*
         * WARPDRIVE: Though the following fields are not used for direct IO,
         * stored for future purpose:
         */
        raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
        raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
        raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);


        kfree(vol_pg0);
        return;

out_error:
        raid_device->direct_io_enabled = 0;
        for (count = 0; count < num_pds; count++)
                raid_device->pd_handle[count] = 0;
        kfree(vol_pg0);
        return;
}

/**
 * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
 * @ioc: per adapter object
 * @scmd: pointer to scsi command object
 * @raid_device: pointer to raid device data structure
 * @mpi_request: pointer to the SCSI_IO reqest message frame
 */
void
mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
        struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request)
{
        sector_t v_lba, p_lba, stripe_off, column, io_size;
        u32 stripe_sz, stripe_exp;
        u8 num_pds, cmd = scmd->cmnd[0];
        struct scsiio_tracker *st = scsi_cmd_priv(scmd);

        if (cmd != READ_10 && cmd != WRITE_10 &&
            cmd != READ_16 && cmd != WRITE_16)
                return;

        if (cmd == READ_10 || cmd == WRITE_10)
                v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
        else
                v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);

        io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;

        if (v_lba + io_size - 1 > raid_device->max_lba)
                return;

        stripe_sz = raid_device->stripe_sz;
        stripe_exp = raid_device->stripe_exponent;
        stripe_off = v_lba & (stripe_sz - 1);

        /* Return unless IO falls within a stripe */
        if (stripe_off + io_size > stripe_sz)
                return;

        num_pds = raid_device->num_pds;
        p_lba = v_lba >> stripe_exp;
        column = sector_div(p_lba, num_pds);
        p_lba = (p_lba << stripe_exp) + stripe_off;
        mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);

        if (cmd == READ_10 || cmd == WRITE_10)
                put_unaligned_be32(lower_32_bits(p_lba),
                                   &mpi_request->CDB.CDB32[2]);
        else
                put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);

        st->direct_io = 1;
}