linux/Documentation/hwmon/max6639.rst
<<
>>
Prefs
   1Kernel driver max6639
   2=====================
   3
   4Supported chips:
   5
   6  * Maxim MAX6639
   7
   8    Prefix: 'max6639'
   9
  10    Addresses scanned: I2C 0x2c, 0x2e, 0x2f
  11
  12    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6639.pdf
  13
  14Authors:
  15    - He Changqing <hechangqing@semptian.com>
  16    - Roland Stigge <stigge@antcom.de>
  17
  18Description
  19-----------
  20
  21This driver implements support for the Maxim MAX6639. This chip is a 2-channel
  22temperature monitor with dual PWM fan speed controller. It can monitor its own
  23temperature and one external diode-connected transistor or two external
  24diode-connected transistors.
  25
  26The following device attributes are implemented via sysfs:
  27
  28====================== ==== ===================================================
  29Attribute              R/W  Contents
  30====================== ==== ===================================================
  31temp1_input            R    Temperature channel 1 input (0..150 C)
  32temp2_input            R    Temperature channel 2 input (0..150 C)
  33temp1_fault            R    Temperature channel 1 diode fault
  34temp2_fault            R    Temperature channel 2 diode fault
  35temp1_max              RW   Set THERM temperature for input 1
  36                            (in C, see datasheet)
  37temp2_max              RW   Set THERM temperature for input 2
  38temp1_crit             RW   Set ALERT temperature for input 1
  39temp2_crit             RW   Set ALERT temperature for input 2
  40temp1_emergency        RW   Set OT temperature for input 1
  41                            (in C, see datasheet)
  42temp2_emergency        RW   Set OT temperature for input 2
  43pwm1                   RW   Fan 1 target duty cycle (0..255)
  44pwm2                   RW   Fan 2 target duty cycle (0..255)
  45fan1_input             R    TACH1 fan tachometer input (in RPM)
  46fan2_input             R    TACH2 fan tachometer input (in RPM)
  47fan1_fault             R    Fan 1 fault
  48fan2_fault             R    Fan 2 fault
  49temp1_max_alarm        R    Alarm on THERM temperature on channel 1
  50temp2_max_alarm        R    Alarm on THERM temperature on channel 2
  51temp1_crit_alarm       R    Alarm on ALERT temperature on channel 1
  52temp2_crit_alarm       R    Alarm on ALERT temperature on channel 2
  53temp1_emergency_alarm  R    Alarm on OT temperature on channel 1
  54temp2_emergency_alarm  R    Alarm on OT temperature on channel 2
  55====================== ==== ===================================================
  56