LXR linux/arch/arm/mach-omap2/usb.h

   1/* SPDX-License-Identifier: GPL-2.0 */
   2#include <linux/platform_data/usb-omap.h>
   3
   4/* AM35x */
   5/* USB 2.0 PHY Control */
   6#define CONF2_PHY_GPIOMODE      (1 << 23)
   7#define CONF2_OTGMODE           (3 << 14)
   8#define CONF2_NO_OVERRIDE       (0 << 14)
   9#define CONF2_FORCE_HOST        (1 << 14)
  10#define CONF2_FORCE_DEVICE      (2 << 14)
  11#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
  12#define CONF2_SESENDEN          (1 << 13)
  13#define CONF2_VBDTCTEN          (1 << 12)
  14#define CONF2_REFFREQ_24MHZ     (2 << 8)
  15#define CONF2_REFFREQ_26MHZ     (7 << 8)
  16#define CONF2_REFFREQ_13MHZ     (6 << 8)
  17#define CONF2_REFFREQ           (0xf << 8)
  18#define CONF2_PHYCLKGD          (1 << 7)
  19#define CONF2_VBUSSENSE         (1 << 6)
  20#define CONF2_PHY_PLLON         (1 << 5)
  21#define CONF2_RESET             (1 << 4)
  22#define CONF2_PHYPWRDN          (1 << 3)
  23#define CONF2_OTGPWRDN          (1 << 2)
  24#define CONF2_DATPOL            (1 << 1)
  25
  26/* TI81XX specific definitions */
  27#define USBCTRL0        0x620
  28#define USBSTAT0        0x624
  29
  30/* TI816X PHY controls bits */
  31#define TI816X_USBPHY0_NORMAL_MODE      (1 << 0)
  32#define TI816X_USBPHY_REFCLK_OSC        (1 << 8)
  33
  34/* TI814X PHY controls bits */
  35#define USBPHY_CM_PWRDN         (1 << 0)
  36#define USBPHY_OTG_PWRDN        (1 << 1)
  37#define USBPHY_CHGDET_DIS       (1 << 2)
  38#define USBPHY_CHGDET_RSTRT     (1 << 3)
  39#define USBPHY_SRCONDM          (1 << 4)
  40#define USBPHY_SINKONDP         (1 << 5)
  41#define USBPHY_CHGISINK_EN      (1 << 6)
  42#define USBPHY_CHGVSRC_EN       (1 << 7)
  43#define USBPHY_DMPULLUP         (1 << 8)
  44#define USBPHY_DPPULLUP         (1 << 9)
  45#define USBPHY_CDET_EXTCTL      (1 << 10)
  46#define USBPHY_GPIO_MODE        (1 << 12)
  47#define USBPHY_DPOPBUFCTL       (1 << 13)
  48#define USBPHY_DMOPBUFCTL       (1 << 14)
  49#define USBPHY_DPINPUT          (1 << 15)
  50#define USBPHY_DMINPUT          (1 << 16)
  51#define USBPHY_DPGPIO_PD        (1 << 17)
  52#define USBPHY_DMGPIO_PD        (1 << 18)
  53#define USBPHY_OTGVDET_EN       (1 << 19)
  54#define USBPHY_OTGSESSEND_EN    (1 << 20)
  55#define USBPHY_DATA_POLARITY    (1 << 23)
  56
  57struct usbhs_phy_data {
  58        int port;               /* 1 indexed port number */
  59        int reset_gpio;
  60        int vcc_gpio;
  61        bool vcc_polarity;      /* 1 active high, 0 active low */
  62};
  63
  64extern void usb_musb_init(struct omap_musb_board_data *board_data);
  65extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
  66extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
  67
  68extern void am35x_musb_reset(void);
  69extern void am35x_musb_phy_power(u8 on);
  70extern void am35x_musb_clear_irq(void);
  71extern void am35x_set_mode(u8 musb_mode);
  72