linux/arch/arm/mach-pxa/trizeps4.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  linux/arch/arm/mach-pxa/trizeps4.c
   4 *
   5 *  Support for the Keith und Koep Trizeps4 Module Platform.
   6 *
   7 *  Author:     Jürgen Schindele
   8 *  Created:    20 02, 2006
   9 *  Copyright:  Jürgen Schindele
  10 */
  11
  12#include <linux/init.h>
  13#include <linux/kernel.h>
  14#include <linux/platform_device.h>
  15#include <linux/interrupt.h>
  16#include <linux/leds.h>
  17#include <linux/export.h>
  18#include <linux/sched.h>
  19#include <linux/bitops.h>
  20#include <linux/fb.h>
  21#include <linux/ioport.h>
  22#include <linux/delay.h>
  23#include <linux/gpio.h>
  24#include <linux/dm9000.h>
  25#include <linux/mtd/physmap.h>
  26#include <linux/mtd/partitions.h>
  27#include <linux/regulator/machine.h>
  28#include <linux/platform_data/i2c-pxa.h>
  29
  30#include <asm/types.h>
  31#include <asm/setup.h>
  32#include <asm/memory.h>
  33#include <asm/mach-types.h>
  34#include <asm/irq.h>
  35#include <linux/sizes.h>
  36
  37#include <asm/mach/arch.h>
  38#include <asm/mach/map.h>
  39#include <asm/mach/irq.h>
  40#include <asm/mach/flash.h>
  41
  42#include "pxa27x.h"
  43#include <mach/trizeps4.h>
  44#include <mach/audio.h>
  45#include <linux/platform_data/video-pxafb.h>
  46#include <linux/platform_data/mmc-pxamci.h>
  47#include <linux/platform_data/irda-pxaficp.h>
  48#include <linux/platform_data/usb-ohci-pxa27x.h>
  49#include <mach/smemc.h>
  50
  51#include "generic.h"
  52#include "devices.h"
  53
  54/*      comment out the following line if you want to use the
  55 *      Standard UART from PXA for serial / irda transmission
  56 *      and acivate it if you have status leds connected */
  57#define STATUS_LEDS_ON_STUART_PINS 1
  58
  59/*****************************************************************************
  60 * MultiFunctionPins of CPU
  61 *****************************************************************************/
  62static unsigned long trizeps4_pin_config[] __initdata = {
  63        /* Chip Selects */
  64        GPIO15_nCS_1,           /* DiskOnChip CS */
  65        GPIO93_GPIO,            /* TRIZEPS4_DOC_IRQ */
  66        GPIO94_GPIO,            /* DOC lock */
  67
  68        GPIO78_nCS_2,           /* DM9000 CS */
  69        GPIO101_GPIO,           /* TRIZEPS4_ETH_IRQ */
  70
  71        GPIO79_nCS_3,           /* Logic CS */
  72        GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,       /* Logic irq */
  73
  74        /* AC97 */
  75        GPIO28_AC97_BITCLK,
  76        GPIO29_AC97_SDATA_IN_0,
  77        GPIO30_AC97_SDATA_OUT,
  78        GPIO31_AC97_SYNC,
  79
  80        /* LCD - 16bpp Active TFT */
  81        GPIOxx_LCD_TFT_16BPP,
  82
  83        /* UART */
  84        GPIO9_FFUART_CTS,
  85        GPIO10_FFUART_DCD,
  86        GPIO16_FFUART_TXD,
  87        GPIO33_FFUART_DSR,
  88        GPIO38_FFUART_RI,
  89        GPIO82_FFUART_DTR,
  90        GPIO83_FFUART_RTS,
  91        GPIO96_FFUART_RXD,
  92
  93        GPIO42_BTUART_RXD,
  94        GPIO43_BTUART_TXD,
  95        GPIO44_BTUART_CTS,
  96        GPIO45_BTUART_RTS,
  97#ifdef STATUS_LEDS_ON_STUART_PINS
  98        GPIO46_GPIO,
  99        GPIO47_GPIO,
 100#else
 101        GPIO46_STUART_RXD,
 102        GPIO47_STUART_TXD,
 103#endif
 104        /* PCMCIA */
 105        GPIO11_GPIO,                    /* TRIZEPS4_CD_IRQ */
 106        GPIO13_GPIO,                    /* TRIZEPS4_READY_NINT */
 107        GPIO48_nPOE,
 108        GPIO49_nPWE,
 109        GPIO50_nPIOR,
 110        GPIO51_nPIOW,
 111        GPIO54_nPCE_2,
 112        GPIO55_nPREG,
 113        GPIO56_nPWAIT,
 114        GPIO57_nIOIS16,
 115        GPIO102_nPCE_1,
 116        GPIO104_PSKTSEL,
 117
 118        /* MultiMediaCard */
 119        GPIO32_MMC_CLK,
 120        GPIO92_MMC_DAT_0,
 121        GPIO109_MMC_DAT_1,
 122        GPIO110_MMC_DAT_2,
 123        GPIO111_MMC_DAT_3,
 124        GPIO112_MMC_CMD,
 125        GPIO12_GPIO,                    /* TRIZEPS4_MMC_IRQ */
 126
 127        /* USB OHCI */
 128        GPIO88_USBH1_PWR,               /* USBHPWR1 */
 129        GPIO89_USBH1_PEN,               /* USBHPEN1 */
 130
 131        /* I2C */
 132        GPIO117_I2C_SCL,
 133        GPIO118_I2C_SDA,
 134};
 135
 136static unsigned long trizeps4wl_pin_config[] __initdata = {
 137        /* SSP 2 */
 138        GPIO14_SSP2_SFRM,
 139        GPIO19_SSP2_SCLK,
 140        GPIO53_GPIO,                    /* TRIZEPS4_SPI_IRQ */
 141        GPIO86_SSP2_RXD,
 142        GPIO87_SSP2_TXD,
 143};
 144
 145/****************************************************************************
 146 * ONBOARD FLASH
 147 ****************************************************************************/
 148static struct mtd_partition trizeps4_partitions[] = {
 149        {
 150                .name =         "Bootloader",
 151                .offset =       0x00000000,
 152                .size =         0x00040000,
 153                .mask_flags =   MTD_WRITEABLE  /* force read-only */
 154        }, {
 155                .name =         "Backup",
 156                .offset =       0x00040000,
 157                .size =         0x00040000,
 158        }, {
 159                .name =         "Image",
 160                .offset =       0x00080000,
 161                .size =         0x01080000,
 162        }, {
 163                .name =         "IPSM",
 164                .offset =       0x01100000,
 165                .size =         0x00e00000,
 166        }, {
 167                .name =         "Registry",
 168                .offset =       0x01f00000,
 169                .size =         MTDPART_SIZ_FULL,
 170        }
 171};
 172
 173static struct physmap_flash_data trizeps4_flash_data[] = {
 174        {
 175                .width          = 4,                    /* bankwidth in bytes */
 176                .parts          = trizeps4_partitions,
 177                .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
 178        }
 179};
 180
 181static struct resource flash_resource = {
 182        .start  = PXA_CS0_PHYS,
 183        .end    = PXA_CS0_PHYS + SZ_32M - 1,
 184        .flags  = IORESOURCE_MEM,
 185};
 186
 187static struct platform_device flash_device = {
 188        .name           = "physmap-flash",
 189        .id             = 0,
 190        .dev = {
 191                .platform_data = trizeps4_flash_data,
 192        },
 193        .resource = &flash_resource,
 194        .num_resources = 1,
 195};
 196
 197/****************************************************************************
 198 * DAVICOM DM9000 Ethernet
 199 ****************************************************************************/
 200static struct resource dm9000_resources[] = {
 201        [0] = {
 202                .start  = TRIZEPS4_ETH_PHYS+0x300,
 203                .end    = TRIZEPS4_ETH_PHYS+0x400-1,
 204                .flags  = IORESOURCE_MEM,
 205        },
 206        [1] = {
 207                .start  = TRIZEPS4_ETH_PHYS+0x8300,
 208                .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
 209                .flags  = IORESOURCE_MEM,
 210        },
 211        [2] = {
 212                .start  = TRIZEPS4_ETH_IRQ,
 213                .end    = TRIZEPS4_ETH_IRQ,
 214                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 215        },
 216};
 217
 218static struct dm9000_plat_data tri_dm9000_platdata = {
 219        .flags          = DM9000_PLATF_32BITONLY,
 220};
 221
 222static struct platform_device dm9000_device = {
 223        .name           = "dm9000",
 224        .id             = -1,
 225        .num_resources  = ARRAY_SIZE(dm9000_resources),
 226        .resource       = dm9000_resources,
 227        .dev            = {
 228                .platform_data = &tri_dm9000_platdata,
 229        }
 230};
 231
 232/****************************************************************************
 233 * LED's on GPIO pins of PXA
 234 ****************************************************************************/
 235static struct gpio_led trizeps4_led[] = {
 236#ifdef STATUS_LEDS_ON_STUART_PINS
 237        {
 238                .name = "led0:orange:heartbeat",        /* */
 239                .default_trigger = "heartbeat",
 240                .gpio = GPIO_HEARTBEAT_LED,
 241                .active_low = 1,
 242        },
 243        {
 244                .name = "led1:yellow:cpubusy",          /* */
 245                .default_trigger = "cpu-busy",
 246                .gpio = GPIO_SYS_BUSY_LED,
 247                .active_low = 1,
 248        },
 249#endif
 250};
 251
 252static struct gpio_led_platform_data trizeps4_led_data = {
 253        .leds           = trizeps4_led,
 254        .num_leds       = ARRAY_SIZE(trizeps4_led),
 255};
 256
 257static struct platform_device leds_devices = {
 258        .name           = "leds-gpio",
 259        .id             = -1,
 260        .dev            = {
 261                .platform_data  = &trizeps4_led_data,
 262        },
 263};
 264
 265static struct platform_device *trizeps4_devices[] __initdata = {
 266        &flash_device,
 267        &dm9000_device,
 268        &leds_devices,
 269};
 270
 271static struct platform_device *trizeps4wl_devices[] __initdata = {
 272        &flash_device,
 273        &leds_devices,
 274};
 275
 276static short trizeps_conxs_bcr;
 277
 278/* PCCARD power switching supports only 3,3V */
 279void board_pcmcia_power(int power)
 280{
 281        if (power) {
 282                /* switch power on, put in reset and enable buffers */
 283                trizeps_conxs_bcr |= power;
 284                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 285                trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
 286                BCR_writew(trizeps_conxs_bcr);
 287                /* wait a little */
 288                udelay(2000);
 289                /* take reset away */
 290                trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
 291                BCR_writew(trizeps_conxs_bcr);
 292                udelay(2000);
 293        } else {
 294                /* put in reset */
 295                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 296                BCR_writew(trizeps_conxs_bcr);
 297                udelay(1000);
 298                /* switch power off */
 299                trizeps_conxs_bcr &= ~0xf;
 300                BCR_writew(trizeps_conxs_bcr);
 301        }
 302        pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
 303                        trizeps_conxs_bcr);
 304}
 305EXPORT_SYMBOL(board_pcmcia_power);
 306
 307/* backlight power switching for LCD panel */
 308static void board_backlight_power(int on)
 309{
 310        if (on)
 311                trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
 312        else
 313                trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 314
 315        pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
 316                        trizeps_conxs_bcr);
 317        BCR_writew(trizeps_conxs_bcr);
 318}
 319
 320/* a I2C based RTC is known on CONXS board */
 321static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
 322        { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
 323};
 324
 325/****************************************************************************
 326 * MMC card slot external to module
 327 ****************************************************************************/
 328static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 329                void *data)
 330{
 331        int err;
 332
 333        err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
 334                          IRQF_TRIGGER_RISING, "MMC card detect", data);
 335        if (err) {
 336                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
 337                                                "MMC card detect IRQ\n");
 338                return -1;
 339        }
 340        return 0;
 341}
 342
 343static void trizeps4_mci_exit(struct device *dev, void *data)
 344{
 345        free_irq(TRIZEPS4_MMC_IRQ, data);
 346}
 347
 348static struct pxamci_platform_data trizeps4_mci_platform_data = {
 349        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 350        .detect_delay_ms= 10,
 351        .init           = trizeps4_mci_init,
 352        .exit           = trizeps4_mci_exit,
 353        .get_ro         = NULL, /* write-protection not supported */
 354        .setpower       = NULL, /* power-switching not supported */
 355};
 356
 357/****************************************************************************
 358 * IRDA mode switching on stuart
 359 ****************************************************************************/
 360#ifndef STATUS_LEDS_ON_STUART_PINS
 361static short trizeps_conxs_ircr;
 362
 363static int trizeps4_irda_startup(struct device *dev)
 364{
 365        trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 366        IRCR_writew(trizeps_conxs_ircr);
 367        return 0;
 368}
 369
 370static void trizeps4_irda_shutdown(struct device *dev)
 371{
 372        trizeps_conxs_ircr |= ConXS_IRCR_SD;
 373        IRCR_writew(trizeps_conxs_ircr);
 374}
 375
 376static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 377{
 378        unsigned long flags;
 379
 380        local_irq_save(flags);
 381        /* Switch mode */
 382        if (mode & IR_SIRMODE)
 383                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
 384        else if (mode & IR_FIRMODE)
 385                trizeps_conxs_ircr |= ConXS_IRCR_MODE;  /* Fast mode */
 386
 387        /* Switch power */
 388        if (mode & IR_OFF)
 389                trizeps_conxs_ircr |= ConXS_IRCR_SD;
 390        else
 391                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 392
 393        IRCR_writew(trizeps_conxs_ircr);
 394        local_irq_restore(flags);
 395
 396        pxa2xx_transceiver_mode(dev, mode);
 397}
 398
 399static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
 400        .gpio_pwdown            = -1,
 401        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 402        .transceiver_mode       = trizeps4_irda_transceiver_mode,
 403        .startup                = trizeps4_irda_startup,
 404        .shutdown               = trizeps4_irda_shutdown,
 405};
 406#endif
 407
 408/****************************************************************************
 409 * OHCI USB port
 410 ****************************************************************************/
 411static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 412        .port_mode      = PMM_PERPORT_MODE,
 413        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 414};
 415
 416static struct map_desc trizeps4_io_desc[] __initdata = {
 417        {       /* ConXS CFSR */
 418                .virtual        = TRIZEPS4_CFSR_VIRT,
 419                .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
 420                .length         = 0x00001000,
 421                .type           = MT_DEVICE
 422        },
 423        {       /* ConXS BCR */
 424                .virtual        = TRIZEPS4_BOCR_VIRT,
 425                .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
 426                .length         = 0x00001000,
 427                .type           = MT_DEVICE
 428        },
 429        {       /* ConXS IRCR */
 430                .virtual        = TRIZEPS4_IRCR_VIRT,
 431                .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
 432                .length         = 0x00001000,
 433                .type           = MT_DEVICE
 434        },
 435        {       /* ConXS DCR */
 436                .virtual        = TRIZEPS4_DICR_VIRT,
 437                .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
 438                .length         = 0x00001000,
 439                .type           = MT_DEVICE
 440        },
 441        {       /* ConXS UPSR */
 442                .virtual        = TRIZEPS4_UPSR_VIRT,
 443                .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
 444                .length         = 0x00001000,
 445                .type           = MT_DEVICE
 446        }
 447};
 448
 449static struct pxafb_mode_info sharp_lcd_mode = {
 450        .pixclock       = 78000,
 451        .xres           = 640,
 452        .yres           = 480,
 453        .bpp            = 8,
 454        .hsync_len      = 4,
 455        .left_margin    = 4,
 456        .right_margin   = 4,
 457        .vsync_len      = 2,
 458        .upper_margin   = 0,
 459        .lower_margin   = 0,
 460        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 461        .cmap_greyscale = 0,
 462};
 463
 464static struct pxafb_mach_info sharp_lcd = {
 465        .modes          = &sharp_lcd_mode,
 466        .num_modes      = 1,
 467        .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
 468        .cmap_inverse   = 0,
 469        .cmap_static    = 0,
 470        .pxafb_backlight_power = board_backlight_power,
 471};
 472
 473static struct pxafb_mode_info toshiba_lcd_mode = {
 474        .pixclock       = 39720,
 475        .xres           = 640,
 476        .yres           = 480,
 477        .bpp            = 8,
 478        .hsync_len      = 63,
 479        .left_margin    = 12,
 480        .right_margin   = 12,
 481        .vsync_len      = 4,
 482        .upper_margin   = 32,
 483        .lower_margin   = 10,
 484        .sync           = 0,
 485        .cmap_greyscale = 0,
 486};
 487
 488static struct pxafb_mach_info toshiba_lcd = {
 489        .modes          = &toshiba_lcd_mode,
 490        .num_modes      = 1,
 491        .lcd_conn       = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
 492        .cmap_inverse   = 0,
 493        .cmap_static    = 0,
 494        .pxafb_backlight_power = board_backlight_power,
 495};
 496
 497static void __init trizeps4_init(void)
 498{
 499        pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
 500        if (machine_is_trizeps4wl()) {
 501                pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
 502                platform_add_devices(trizeps4wl_devices,
 503                                        ARRAY_SIZE(trizeps4wl_devices));
 504        } else {
 505                platform_add_devices(trizeps4_devices,
 506                                        ARRAY_SIZE(trizeps4_devices));
 507        }
 508
 509        pxa_set_ffuart_info(NULL);
 510        pxa_set_btuart_info(NULL);
 511        pxa_set_stuart_info(NULL);
 512
 513        if (0)  /* dont know how to determine LCD */
 514                pxa_set_fb_info(NULL, &sharp_lcd);
 515        else
 516                pxa_set_fb_info(NULL, &toshiba_lcd);
 517
 518        pxa_set_mci_info(&trizeps4_mci_platform_data);
 519#ifndef STATUS_LEDS_ON_STUART_PINS
 520        pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 521#endif
 522        pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 523        pxa_set_ac97_info(NULL);
 524        pxa_set_i2c_info(NULL);
 525        i2c_register_board_info(0, trizeps4_i2c_devices,
 526                                        ARRAY_SIZE(trizeps4_i2c_devices));
 527
 528        /* this is the reset value */
 529        trizeps_conxs_bcr = 0x00A0;
 530
 531        BCR_writew(trizeps_conxs_bcr);
 532        board_backlight_power(1);
 533
 534        regulator_has_full_constraints();
 535}
 536
 537static void __init trizeps4_map_io(void)
 538{
 539        pxa27x_map_io();
 540        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 541
 542        if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
 543                /* if flash is 16 bit wide its a Trizeps4 WL */
 544                __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 545                trizeps4_flash_data[0].width = 2;
 546        } else {
 547                /* if flash is 32 bit wide its a Trizeps4 */
 548                __machine_arch_type = MACH_TYPE_TRIZEPS4;
 549                trizeps4_flash_data[0].width = 4;
 550        }
 551}
 552
 553MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 554        /* MAINTAINER("Jürgen Schindele") */
 555        .atag_offset    = 0x100,
 556        .init_machine   = trizeps4_init,
 557        .map_io         = trizeps4_map_io,
 558        .nr_irqs        = PXA_NR_IRQS,
 559        .init_irq       = pxa27x_init_irq,
 560        .handle_irq     = pxa27x_handle_irq,
 561        .init_time      = pxa_timer_init,
 562        .restart        = pxa_restart,
 563MACHINE_END
 564
 565MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 566        /* MAINTAINER("Jürgen Schindele") */
 567        .atag_offset    = 0x100,
 568        .init_machine   = trizeps4_init,
 569        .map_io         = trizeps4_map_io,
 570        .nr_irqs        = PXA_NR_IRQS,
 571        .init_irq       = pxa27x_init_irq,
 572        .handle_irq     = pxa27x_handle_irq,
 573        .init_time      = pxa_timer_init,
 574        .restart        = pxa_restart,
 575MACHINE_END
 576