linux/arch/mips/alchemy/common/platform.c
<<
>>
Prefs
   1/*
   2 * Platform device support for Au1x00 SoCs.
   3 *
   4 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
   5 *
   6 * (C) Copyright Embedded Alley Solutions, Inc 2005
   7 * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
   8 *
   9 * This file is licensed under the terms of the GNU General Public
  10 * License version 2.  This program is licensed "as is" without any
  11 * warranty of any kind, whether express or implied.
  12 */
  13
  14#include <linux/clk.h>
  15#include <linux/dma-mapping.h>
  16#include <linux/etherdevice.h>
  17#include <linux/init.h>
  18#include <linux/platform_device.h>
  19#include <linux/serial_8250.h>
  20#include <linux/slab.h>
  21#include <linux/usb/ehci_pdriver.h>
  22#include <linux/usb/ohci_pdriver.h>
  23
  24#include <asm/mach-au1x00/au1000.h>
  25#include <asm/mach-au1x00/au1xxx_dbdma.h>
  26#include <asm/mach-au1x00/au1100_mmc.h>
  27#include <asm/mach-au1x00/au1xxx_eth.h>
  28
  29#include <prom.h>
  30
  31static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
  32                            unsigned int old_state)
  33{
  34#ifdef CONFIG_SERIAL_8250
  35        switch (state) {
  36        case 0:
  37                alchemy_uart_enable(CPHYSADDR(port->membase));
  38                serial8250_do_pm(port, state, old_state);
  39                break;
  40        case 3:         /* power off */
  41                serial8250_do_pm(port, state, old_state);
  42                alchemy_uart_disable(CPHYSADDR(port->membase));
  43                break;
  44        default:
  45                serial8250_do_pm(port, state, old_state);
  46                break;
  47        }
  48#endif
  49}
  50
  51#define PORT(_base, _irq)                                       \
  52        {                                                       \
  53                .mapbase        = _base,                        \
  54                .irq            = _irq,                         \
  55                .regshift       = 2,                            \
  56                .iotype         = UPIO_AU,                      \
  57                .flags          = UPF_SKIP_TEST | UPF_IOREMAP | \
  58                                  UPF_FIXED_TYPE,               \
  59                .type           = PORT_16550A,                  \
  60                .pm             = alchemy_8250_pm,              \
  61        }
  62
  63static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
  64        [ALCHEMY_CPU_AU1000] = {
  65                PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
  66                PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
  67                PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
  68                PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
  69        },
  70        [ALCHEMY_CPU_AU1500] = {
  71                PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
  72                PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
  73        },
  74        [ALCHEMY_CPU_AU1100] = {
  75                PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
  76                PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
  77                PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
  78        },
  79        [ALCHEMY_CPU_AU1550] = {
  80                PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
  81                PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
  82                PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
  83        },
  84        [ALCHEMY_CPU_AU1200] = {
  85                PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
  86                PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
  87        },
  88        [ALCHEMY_CPU_AU1300] = {
  89                PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
  90                PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
  91                PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
  92                PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
  93        },
  94};
  95
  96static struct platform_device au1xx0_uart_device = {
  97        .name                   = "serial8250",
  98        .id                     = PLAT8250_DEV_AU1X00,
  99};
 100
 101static void __init alchemy_setup_uarts(int ctype)
 102{
 103        long uartclk;
 104        int s = sizeof(struct plat_serial8250_port);
 105        int c = alchemy_get_uarts(ctype);
 106        struct plat_serial8250_port *ports;
 107        struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
 108
 109        if (IS_ERR(clk))
 110                return;
 111        if (clk_prepare_enable(clk)) {
 112                clk_put(clk);
 113                return;
 114        }
 115        uartclk = clk_get_rate(clk);
 116        clk_put(clk);
 117
 118        ports = kcalloc(s, (c + 1), GFP_KERNEL);
 119        if (!ports) {
 120                printk(KERN_INFO "Alchemy: no memory for UART data\n");
 121                return;
 122        }
 123        memcpy(ports, au1x00_uart_data[ctype], s * c);
 124        au1xx0_uart_device.dev.platform_data = ports;
 125
 126        /* Fill up uartclk. */
 127        for (s = 0; s < c; s++)
 128                ports[s].uartclk = uartclk;
 129        if (platform_device_register(&au1xx0_uart_device))
 130                printk(KERN_INFO "Alchemy: failed to register UARTs\n");
 131}
 132
 133
 134static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
 135
 136/* Power on callback for the ehci platform driver */
 137static int alchemy_ehci_power_on(struct platform_device *pdev)
 138{
 139        return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
 140}
 141
 142/* Power off/suspend callback for the ehci platform driver */
 143static void alchemy_ehci_power_off(struct platform_device *pdev)
 144{
 145        alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 146}
 147
 148static struct usb_ehci_pdata alchemy_ehci_pdata = {
 149        .no_io_watchdog = 1,
 150        .power_on       = alchemy_ehci_power_on,
 151        .power_off      = alchemy_ehci_power_off,
 152        .power_suspend  = alchemy_ehci_power_off,
 153};
 154
 155/* Power on callback for the ohci platform driver */
 156static int alchemy_ohci_power_on(struct platform_device *pdev)
 157{
 158        int unit;
 159
 160        unit = (pdev->id == 1) ?
 161                ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
 162
 163        return alchemy_usb_control(unit, 1);
 164}
 165
 166/* Power off/suspend callback for the ohci platform driver */
 167static void alchemy_ohci_power_off(struct platform_device *pdev)
 168{
 169        int unit;
 170
 171        unit = (pdev->id == 1) ?
 172                ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
 173
 174        alchemy_usb_control(unit, 0);
 175}
 176
 177static struct usb_ohci_pdata alchemy_ohci_pdata = {
 178        .power_on               = alchemy_ohci_power_on,
 179        .power_off              = alchemy_ohci_power_off,
 180        .power_suspend          = alchemy_ohci_power_off,
 181};
 182
 183static unsigned long alchemy_ohci_data[][2] __initdata = {
 184        [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
 185        [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
 186        [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
 187        [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
 188        [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
 189        [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
 190};
 191
 192static unsigned long alchemy_ehci_data[][2] __initdata = {
 193        [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
 194        [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
 195};
 196
 197static int __init _new_usbres(struct resource **r, struct platform_device **d)
 198{
 199        *r = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
 200        if (!*r)
 201                return -ENOMEM;
 202        *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
 203        if (!*d) {
 204                kfree(*r);
 205                return -ENOMEM;
 206        }
 207
 208        (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 209        (*d)->num_resources = 2;
 210        (*d)->resource = *r;
 211
 212        return 0;
 213}
 214
 215static void __init alchemy_setup_usb(int ctype)
 216{
 217        struct resource *res;
 218        struct platform_device *pdev;
 219
 220        /* setup OHCI0.  Every variant has one */
 221        if (_new_usbres(&res, &pdev))
 222                return;
 223
 224        res[0].start = alchemy_ohci_data[ctype][0];
 225        res[0].end = res[0].start + 0x100 - 1;
 226        res[0].flags = IORESOURCE_MEM;
 227        res[1].start = alchemy_ohci_data[ctype][1];
 228        res[1].end = res[1].start;
 229        res[1].flags = IORESOURCE_IRQ;
 230        pdev->name = "ohci-platform";
 231        pdev->id = 0;
 232        pdev->dev.dma_mask = &alchemy_all_dmamask;
 233        pdev->dev.platform_data = &alchemy_ohci_pdata;
 234
 235        if (platform_device_register(pdev))
 236                printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
 237
 238
 239        /* setup EHCI0: Au1200/Au1300 */
 240        if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
 241                if (_new_usbres(&res, &pdev))
 242                        return;
 243
 244                res[0].start = alchemy_ehci_data[ctype][0];
 245                res[0].end = res[0].start + 0x100 - 1;
 246                res[0].flags = IORESOURCE_MEM;
 247                res[1].start = alchemy_ehci_data[ctype][1];
 248                res[1].end = res[1].start;
 249                res[1].flags = IORESOURCE_IRQ;
 250                pdev->name = "ehci-platform";
 251                pdev->id = 0;
 252                pdev->dev.dma_mask = &alchemy_all_dmamask;
 253                pdev->dev.platform_data = &alchemy_ehci_pdata;
 254
 255                if (platform_device_register(pdev))
 256                        printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
 257        }
 258
 259        /* Au1300: OHCI1 */
 260        if (ctype == ALCHEMY_CPU_AU1300) {
 261                if (_new_usbres(&res, &pdev))
 262                        return;
 263
 264                res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
 265                res[0].end = res[0].start + 0x100 - 1;
 266                res[0].flags = IORESOURCE_MEM;
 267                res[1].start = AU1300_USB_INT;
 268                res[1].end = res[1].start;
 269                res[1].flags = IORESOURCE_IRQ;
 270                pdev->name = "ohci-platform";
 271                pdev->id = 1;
 272                pdev->dev.dma_mask = &alchemy_all_dmamask;
 273                pdev->dev.platform_data = &alchemy_ohci_pdata;
 274
 275                if (platform_device_register(pdev))
 276                        printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
 277        }
 278}
 279
 280/* Macro to help defining the Ethernet MAC resources */
 281#define MAC_RES_COUNT   4       /* MAC regs, MAC en, MAC INT, MACDMA regs */
 282#define MAC_RES(_base, _enable, _irq, _macdma)          \
 283        {                                               \
 284                .start  = _base,                        \
 285                .end    = _base + 0xffff,               \
 286                .flags  = IORESOURCE_MEM,               \
 287        },                                              \
 288        {                                               \
 289                .start  = _enable,                      \
 290                .end    = _enable + 0x3,                \
 291                .flags  = IORESOURCE_MEM,               \
 292        },                                              \
 293        {                                               \
 294                .start  = _irq,                         \
 295                .end    = _irq,                         \
 296                .flags  = IORESOURCE_IRQ                \
 297        },                                              \
 298        {                                               \
 299                .start  = _macdma,                      \
 300                .end    = _macdma + 0x1ff,              \
 301                .flags  = IORESOURCE_MEM,               \
 302        }
 303
 304static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
 305        [ALCHEMY_CPU_AU1000] = {
 306                MAC_RES(AU1000_MAC0_PHYS_ADDR,
 307                        AU1000_MACEN_PHYS_ADDR,
 308                        AU1000_MAC0_DMA_INT,
 309                        AU1000_MACDMA0_PHYS_ADDR)
 310        },
 311        [ALCHEMY_CPU_AU1500] = {
 312                MAC_RES(AU1500_MAC0_PHYS_ADDR,
 313                        AU1500_MACEN_PHYS_ADDR,
 314                        AU1500_MAC0_DMA_INT,
 315                        AU1000_MACDMA0_PHYS_ADDR)
 316        },
 317        [ALCHEMY_CPU_AU1100] = {
 318                MAC_RES(AU1000_MAC0_PHYS_ADDR,
 319                        AU1000_MACEN_PHYS_ADDR,
 320                        AU1100_MAC0_DMA_INT,
 321                        AU1000_MACDMA0_PHYS_ADDR)
 322        },
 323        [ALCHEMY_CPU_AU1550] = {
 324                MAC_RES(AU1000_MAC0_PHYS_ADDR,
 325                        AU1000_MACEN_PHYS_ADDR,
 326                        AU1550_MAC0_DMA_INT,
 327                        AU1000_MACDMA0_PHYS_ADDR)
 328        },
 329};
 330
 331static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
 332        .phy1_search_mac0 = 1,
 333};
 334
 335static struct platform_device au1xxx_eth0_device = {
 336        .name           = "au1000-eth",
 337        .id             = 0,
 338        .num_resources  = MAC_RES_COUNT,
 339        .dev = {
 340                .dma_mask               = &alchemy_all_dmamask,
 341                .coherent_dma_mask      = DMA_BIT_MASK(32),
 342                .platform_data          = &au1xxx_eth0_platform_data,
 343        },
 344};
 345
 346static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
 347        [ALCHEMY_CPU_AU1000] = {
 348                MAC_RES(AU1000_MAC1_PHYS_ADDR,
 349                        AU1000_MACEN_PHYS_ADDR + 4,
 350                        AU1000_MAC1_DMA_INT,
 351                        AU1000_MACDMA1_PHYS_ADDR)
 352        },
 353        [ALCHEMY_CPU_AU1500] = {
 354                MAC_RES(AU1500_MAC1_PHYS_ADDR,
 355                        AU1500_MACEN_PHYS_ADDR + 4,
 356                        AU1500_MAC1_DMA_INT,
 357                        AU1000_MACDMA1_PHYS_ADDR)
 358        },
 359        [ALCHEMY_CPU_AU1550] = {
 360                MAC_RES(AU1000_MAC1_PHYS_ADDR,
 361                        AU1000_MACEN_PHYS_ADDR + 4,
 362                        AU1550_MAC1_DMA_INT,
 363                        AU1000_MACDMA1_PHYS_ADDR)
 364        },
 365};
 366
 367static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
 368        .phy1_search_mac0 = 1,
 369};
 370
 371static struct platform_device au1xxx_eth1_device = {
 372        .name           = "au1000-eth",
 373        .id             = 1,
 374        .num_resources  = MAC_RES_COUNT,
 375        .dev = {
 376                .dma_mask               = &alchemy_all_dmamask,
 377                .coherent_dma_mask      = DMA_BIT_MASK(32),
 378                .platform_data          = &au1xxx_eth1_platform_data,
 379        },
 380};
 381
 382void __init au1xxx_override_eth_cfg(unsigned int port,
 383                        struct au1000_eth_platform_data *eth_data)
 384{
 385        if (!eth_data || port > 1)
 386                return;
 387
 388        if (port == 0)
 389                memcpy(&au1xxx_eth0_platform_data, eth_data,
 390                        sizeof(struct au1000_eth_platform_data));
 391        else
 392                memcpy(&au1xxx_eth1_platform_data, eth_data,
 393                        sizeof(struct au1000_eth_platform_data));
 394}
 395
 396static void __init alchemy_setup_macs(int ctype)
 397{
 398        int ret, i;
 399        unsigned char ethaddr[6];
 400        struct resource *macres;
 401
 402        /* Handle 1st MAC */
 403        if (alchemy_get_macs(ctype) < 1)
 404                return;
 405
 406        macres = kmemdup(au1xxx_eth0_resources[ctype],
 407                         sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
 408        if (!macres) {
 409                printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
 410                return;
 411        }
 412        au1xxx_eth0_device.resource = macres;
 413
 414        i = prom_get_ethernet_addr(ethaddr);
 415        if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
 416                memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
 417
 418        ret = platform_device_register(&au1xxx_eth0_device);
 419        if (ret)
 420                printk(KERN_INFO "Alchemy: failed to register MAC0\n");
 421
 422
 423        /* Handle 2nd MAC */
 424        if (alchemy_get_macs(ctype) < 2)
 425                return;
 426
 427        macres = kmemdup(au1xxx_eth1_resources[ctype],
 428                         sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
 429        if (!macres) {
 430                printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
 431                return;
 432        }
 433        au1xxx_eth1_device.resource = macres;
 434
 435        ethaddr[5] += 1;        /* next addr for 2nd MAC */
 436        if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
 437                memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
 438
 439        /* Register second MAC if enabled in pinfunc */
 440        if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
 441                ret = platform_device_register(&au1xxx_eth1_device);
 442                if (ret)
 443                        printk(KERN_INFO "Alchemy: failed to register MAC1\n");
 444        }
 445}
 446
 447static int __init au1xxx_platform_init(void)
 448{
 449        int ctype = alchemy_get_cputype();
 450
 451        alchemy_setup_uarts(ctype);
 452        alchemy_setup_macs(ctype);
 453        alchemy_setup_usb(ctype);
 454
 455        return 0;
 456}
 457
 458arch_initcall(au1xxx_platform_init);
 459