/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Unified implementation of memcpy, memmove and the __copy_user backend.
 *
 * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
 * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
 * Copyright (C) 2002 Broadcom, Inc.
 *   memcpy/copy_user author: Mark Vandevoorde
 * Copyright (C) 2007  Maciej W. Rozycki
 * Copyright (C) 2014 Imagination Technologies Ltd.
 *
 * Mnemonic names for arguments to memcpy/__copy_user
 */

/*
 * Hack to resolve longstanding prefetch issue
 *
 * Prefetching may be fatal on some systems if we're prefetching beyond the
 * end of memory on some systems.  It's also a seriously bad idea on non
 * dma-coherent systems.
 */
#ifdef CONFIG_DMA_NONCOHERENT
#undef CONFIG_CPU_HAS_PREFETCH
#endif
#ifdef CONFIG_MIPS_MALTA
#undef CONFIG_CPU_HAS_PREFETCH
#endif
#ifdef CONFIG_CPU_MIPSR6
#undef CONFIG_CPU_HAS_PREFETCH
#endif

#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/export.h>
#include <asm/regdef.h>

#define dst a0
#define src a1
#define len a2

/*
 * Spec
 *
 * memcpy copies len bytes from src to dst and sets v0 to dst.
 * It assumes that
 *   - src and dst don't overlap
 *   - src is readable
 *   - dst is writable
 * memcpy uses the standard calling convention
 *
 * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
 * the number of uncopied bytes due to an exception caused by a read or write.
 * __copy_user assumes that src and dst don't overlap, and that the call is
 * implementing one of the following:
 *   copy_to_user
 *     - src is readable  (no exceptions when reading src)
 *   copy_from_user
 *     - dst is writable  (no exceptions when writing dst)
 * __copy_user uses a non-standard calling convention; see
 * include/asm-mips/uaccess.h
 *
 * When an exception happens on a load, the handler must
 # ensure that all of the destination buffer is overwritten to prevent
 * leaking information to user mode programs.
 */

/*
 * Implementation
 */

/*
 * The exception handler for loads requires that:
 *  1- AT contain the address of the byte just past the end of the source
 *     of the copy,
 *  2- src_entry <= src < AT, and
 *  3- (dst - src) == (dst_entry - src_entry),
 * The _entry suffix denotes values when __copy_user was called.
 *
 * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
 * (2) is met by incrementing src by the number of bytes copied
 * (3) is met by not doing loads between a pair of increments of dst and src
 *
 * The exception handlers for stores adjust len (if necessary) and return.
 * These handlers do not need to overwrite any data.
 *
 * For __rmemcpy and memmove an exception is always a kernel bug, therefore
 * they're not protected.
 */

/* Instruction type */
#define LD_INSN 1
#define ST_INSN 2
/* Pretech type */
#define SRC_PREFETCH 1
#define DST_PREFETCH 2
#define LEGACY_MODE 1
#define EVA_MODE    2
#define USEROP   1
#define KERNELOP 2

/*
 * Wrapper to add an entry in the exception table
 * in case the insn causes a memory exception.
 * Arguments:
 * insn    : Load/store instruction
 * type    : Instruction type
 * reg     : Register
 * addr    : Address
 * handler : Exception handler
 */

#define EXC(insn, type, reg, addr, handler)                     \
        .if \mode == LEGACY_MODE;                               \
9:              insn reg, addr;                                 \
                .section __ex_table,"a";                        \
                PTR     9b, handler;                            \
                .previous;                                      \
        /* This is assembled in EVA mode */                     \
        .else;                                                  \
                /* If loading from user or storing to user */   \
                .if ((\from == USEROP) && (type == LD_INSN)) || \
                    ((\to == USEROP) && (type == ST_INSN));     \
9:                      __BUILD_EVA_INSN(insn##e, reg, addr);   \
                        .section __ex_table,"a";                \
                        PTR     9b, handler;                    \
                        .previous;                              \
                .else;                                          \
                        /*                                      \
                         *  Still in EVA, but no need for       \
                         * exception handler or EVA insn        \
                         */                                     \
                        insn reg, addr;                         \
                .endif;                                         \
        .endif

/*
 * Only on the 64-bit kernel we can made use of 64-bit registers.
 */
#ifdef CONFIG_64BIT
#define USE_DOUBLE
#endif

#ifdef USE_DOUBLE

#define LOADK ld /* No exception */
#define LOAD(reg, addr, handler)        EXC(ld, LD_INSN, reg, addr, handler)
#define LOADL(reg, addr, handler)       EXC(ldl, LD_INSN, reg, addr, handler)
#define LOADR(reg, addr, handler)       EXC(ldr, LD_INSN, reg, addr, handler)
#define STOREL(reg, addr, handler)      EXC(sdl, ST_INSN, reg, addr, handler)
#define STORER(reg, addr, handler)      EXC(sdr, ST_INSN, reg, addr, handler)
#define STORE(reg, addr, handler)       EXC(sd, ST_INSN, reg, addr, handler)
#define ADD    daddu
#define SUB    dsubu
#define SRL    dsrl
#define SRA    dsra
#define SLL    dsll
#define SLLV   dsllv
#define SRLV   dsrlv
#define NBYTES 8
#define LOG_NBYTES 3

/*
 * As we are sharing code base with the mips32 tree (which use the o32 ABI
 * register definitions). We need to redefine the register definitions from
 * the n64 ABI register naming to the o32 ABI register naming.
 */
#undef t0
#undef t1
#undef t2
#undef t3
#define t0      $8
#define t1      $9
#define t2      $10
#define t3      $11
#define t4      $12
#define t5      $13
#define t6      $14
#define t7      $15

#else

#define LOADK lw /* No exception */
#define LOAD(reg, addr, handler)        EXC(lw, LD_INSN, reg, addr, handler)
#define LOADL(reg, addr, handler)       EXC(lwl, LD_INSN, reg, addr, handler)
#define LOADR(reg, addr, handler)       EXC(lwr, LD_INSN, reg, addr, handler)
#define STOREL(reg, addr, handler)      EXC(swl, ST_INSN, reg, addr, handler)
#define STORER(reg, addr, handler)      EXC(swr, ST_INSN, reg, addr, handler)
#define STORE(reg, addr, handler)       EXC(sw, ST_INSN, reg, addr, handler)
#define ADD    addu
#define SUB    subu
#define SRL    srl
#define SLL    sll
#define SRA    sra
#define SLLV   sllv
#define SRLV   srlv
#define NBYTES 4
#define LOG_NBYTES 2

#endif /* USE_DOUBLE */

#define LOADB(reg, addr, handler)       EXC(lb, LD_INSN, reg, addr, handler)
#define STOREB(reg, addr, handler)      EXC(sb, ST_INSN, reg, addr, handler)

#ifdef CONFIG_CPU_HAS_PREFETCH
# define _PREF(hint, addr, type)                                        \
        .if \mode == LEGACY_MODE;                                       \
                kernel_pref(hint, addr);                                \
        .else;                                                          \
                .if ((\from == USEROP) && (type == SRC_PREFETCH)) ||    \
                    ((\to == USEROP) && (type == DST_PREFETCH));        \
                        /*                                              \
                         * PREFE has only 9 bits for the offset         \
                         * compared to PREF which has 16, so it may     \
                         * need to use the $at register but this        \
                         * register should remain intact because it's   \
                         * used later on. Therefore use $v1.            \
                         */                                             \
                        .set at=v1;                                     \
                        user_pref(hint, addr);                          \
                        .set noat;                                      \
                .else;                                                  \
                        kernel_pref(hint, addr);                        \
                .endif;                                                 \
        .endif
#else
# define _PREF(hint, addr, type)
#endif

#define PREFS(hint, addr) _PREF(hint, addr, SRC_PREFETCH)
#define PREFD(hint, addr) _PREF(hint, addr, DST_PREFETCH)

#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define LDFIRST LOADR
#define LDREST  LOADL
#define STFIRST STORER
#define STREST  STOREL
#define SHIFT_DISCARD SLLV
#else
#define LDFIRST LOADL
#define LDREST  LOADR
#define STFIRST STOREL
#define STREST  STORER
#define SHIFT_DISCARD SRLV
#endif

#define FIRST(unit) ((unit)*NBYTES)
#define REST(unit)  (FIRST(unit)+NBYTES-1)
#define UNIT(unit)  FIRST(unit)

#define ADDRMASK (NBYTES-1)

        .text
        .set    noreorder
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
        .set    noat
#else
        .set    at=v1
#endif

        .align  5

        /*
         * Macro to build the __copy_user common code
         * Arguments:
         * mode : LEGACY_MODE or EVA_MODE
         * from : Source operand. USEROP or KERNELOP
         * to   : Destination operand. USEROP or KERNELOP
         */
        .macro __BUILD_COPY_USER mode, from, to

        /* initialize __memcpy if this the first time we execute this macro */
        .ifnotdef __memcpy
        .set __memcpy, 1
        .hidden __memcpy /* make sure it does not leak */
        .endif

        /*
         * Note: dst & src may be unaligned, len may be 0
         * Temps
         */
#define rem t8

        R10KCBARRIER(0(ra))
        /*
         * The "issue break"s below are very approximate.
         * Issue delays for dcache fills will perturb the schedule, as will
         * load queue full replay traps, etc.
         *
         * If len < NBYTES use byte operations.
         */
        PREFS(  0, 0(src) )
        PREFD(  1, 0(dst) )
        sltu    t2, len, NBYTES
        and     t1, dst, ADDRMASK
        PREFS(  0, 1*32(src) )
        PREFD(  1, 1*32(dst) )
        bnez    t2, .Lcopy_bytes_checklen\@
         and    t0, src, ADDRMASK
        PREFS(  0, 2*32(src) )
        PREFD(  1, 2*32(dst) )
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
        bnez    t1, .Ldst_unaligned\@
         nop
        bnez    t0, .Lsrc_unaligned_dst_aligned\@
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
        or      t0, t0, t1
        bnez    t0, .Lcopy_unaligned_bytes\@
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
        /*
         * use delay slot for fall-through
         * src and dst are aligned; need to compute rem
         */
.Lboth_aligned\@:
         SRL    t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
        beqz    t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES
         and    rem, len, (8*NBYTES-1)   # rem = len % (8*NBYTES)
        PREFS(  0, 3*32(src) )
        PREFD(  1, 3*32(dst) )
        .align  4
1:
        R10KCBARRIER(0(ra))
        LOAD(t0, UNIT(0)(src), .Ll_exc\@)
        LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@)
        LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@)
        LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@)
        SUB     len, len, 8*NBYTES
        LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@)
        LOAD(t7, UNIT(5)(src), .Ll_exc_copy\@)
        STORE(t0, UNIT(0)(dst), .Ls_exc_p8u\@)
        STORE(t1, UNIT(1)(dst), .Ls_exc_p7u\@)
        LOAD(t0, UNIT(6)(src), .Ll_exc_copy\@)
        LOAD(t1, UNIT(7)(src), .Ll_exc_copy\@)
        ADD     src, src, 8*NBYTES
        ADD     dst, dst, 8*NBYTES
        STORE(t2, UNIT(-6)(dst), .Ls_exc_p6u\@)
        STORE(t3, UNIT(-5)(dst), .Ls_exc_p5u\@)
        STORE(t4, UNIT(-4)(dst), .Ls_exc_p4u\@)
        STORE(t7, UNIT(-3)(dst), .Ls_exc_p3u\@)
        STORE(t0, UNIT(-2)(dst), .Ls_exc_p2u\@)
        STORE(t1, UNIT(-1)(dst), .Ls_exc_p1u\@)
        PREFS(  0, 8*32(src) )
        PREFD(  1, 8*32(dst) )
        bne     len, rem, 1b
         nop

        /*
         * len == rem == the number of bytes left to copy < 8*NBYTES
         */
.Lcleanup_both_aligned\@:
        beqz    len, .Ldone\@
         sltu   t0, len, 4*NBYTES
        bnez    t0, .Lless_than_4units\@
         and    rem, len, (NBYTES-1)    # rem = len % NBYTES
        /*
         * len >= 4*NBYTES
         */
        LOAD( t0, UNIT(0)(src), .Ll_exc\@)
        LOAD( t1, UNIT(1)(src), .Ll_exc_copy\@)
        LOAD( t2, UNIT(2)(src), .Ll_exc_copy\@)
        LOAD( t3, UNIT(3)(src), .Ll_exc_copy\@)
        SUB     len, len, 4*NBYTES
        ADD     src, src, 4*NBYTES
        R10KCBARRIER(0(ra))
        STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
        STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
        STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
        STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
        .set    reorder                         /* DADDI_WAR */
        ADD     dst, dst, 4*NBYTES
        beqz    len, .Ldone\@
        .set    noreorder
.Lless_than_4units\@:
        /*
         * rem = len % NBYTES
         */
        beq     rem, len, .Lcopy_bytes\@
         nop
1:
        R10KCBARRIER(0(ra))
        LOAD(t0, 0(src), .Ll_exc\@)
        ADD     src, src, NBYTES
        SUB     len, len, NBYTES
        STORE(t0, 0(dst), .Ls_exc_p1u\@)
        .set    reorder                         /* DADDI_WAR */
        ADD     dst, dst, NBYTES
        bne     rem, len, 1b
        .set    noreorder

#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
        /*
         * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
         * A loop would do only a byte at a time with possible branch
         * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
         * because can't assume read-access to dst.  Instead, use
         * STREST dst, which doesn't require read access to dst.
         *
         * This code should perform better than a simple loop on modern,
         * wide-issue mips processors because the code has fewer branches and
         * more instruction-level parallelism.
         */
#define bits t2
        beqz    len, .Ldone\@
         ADD    t1, dst, len    # t1 is just past last byte of dst
        li      bits, 8*NBYTES
        SLL     rem, len, 3     # rem = number of bits to keep
        LOAD(t0, 0(src), .Ll_exc\@)
        SUB     bits, bits, rem # bits = number of bits to discard
        SHIFT_DISCARD t0, t0, bits
        STREST(t0, -1(t1), .Ls_exc\@)
        jr      ra
         move   len, zero
.Ldst_unaligned\@:
        /*
         * dst is unaligned
         * t0 = src & ADDRMASK
         * t1 = dst & ADDRMASK; T1 > 0
         * len >= NBYTES
         *
         * Copy enough bytes to align dst
         * Set match = (src and dst have same alignment)
         */
#define match rem
        LDFIRST(t3, FIRST(0)(src), .Ll_exc\@)
        ADD     t2, zero, NBYTES
        LDREST(t3, REST(0)(src), .Ll_exc_copy\@)
        SUB     t2, t2, t1      # t2 = number of bytes copied
        xor     match, t0, t1
        R10KCBARRIER(0(ra))
        STFIRST(t3, FIRST(0)(dst), .Ls_exc\@)
        beq     len, t2, .Ldone\@
         SUB    len, len, t2
        ADD     dst, dst, t2
        beqz    match, .Lboth_aligned\@
         ADD    src, src, t2

.Lsrc_unaligned_dst_aligned\@:
        SRL     t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
        PREFS(  0, 3*32(src) )
        beqz    t0, .Lcleanup_src_unaligned\@
         and    rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
        PREFD(  1, 3*32(dst) )
1:
/*
 * Avoid consecutive LD*'s to the same register since some mips
 * implementations can't issue them in the same cycle.
 * It's OK to load FIRST(N+1) before REST(N) because the two addresses
 * are to the same unit (unless src is aligned, but it's not).
 */
        R10KCBARRIER(0(ra))
        LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
        LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@)
        SUB     len, len, 4*NBYTES
        LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
        LDREST(t1, REST(1)(src), .Ll_exc_copy\@)
        LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@)
        LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@)
        LDREST(t2, REST(2)(src), .Ll_exc_copy\@)
        LDREST(t3, REST(3)(src), .Ll_exc_copy\@)
        PREFS(  0, 9*32(src) )          # 0 is PREF_LOAD  (not streamed)
        ADD     src, src, 4*NBYTES
#ifdef CONFIG_CPU_SB1
        nop                             # improves slotting
#endif
        STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
        STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
        STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
        STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
        PREFD(  1, 9*32(dst) )          # 1 is PREF_STORE (not streamed)
        .set    reorder                         /* DADDI_WAR */
        ADD     dst, dst, 4*NBYTES
        bne     len, rem, 1b
        .set    noreorder

.Lcleanup_src_unaligned\@:
        beqz    len, .Ldone\@
         and    rem, len, NBYTES-1  # rem = len % NBYTES
        beq     rem, len, .Lcopy_bytes\@
         nop
1:
        R10KCBARRIER(0(ra))
        LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
        LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
        ADD     src, src, NBYTES
        SUB     len, len, NBYTES
        STORE(t0, 0(dst), .Ls_exc_p1u\@)
        .set    reorder                         /* DADDI_WAR */
        ADD     dst, dst, NBYTES
        bne     len, rem, 1b
        .set    noreorder

#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
.Lcopy_bytes_checklen\@:
        beqz    len, .Ldone\@
         nop
.Lcopy_bytes\@:
        /* 0 < len < NBYTES  */
        R10KCBARRIER(0(ra))
#define COPY_BYTE(N)                    \
        LOADB(t0, N(src), .Ll_exc\@);   \
        SUB     len, len, 1;            \
        beqz    len, .Ldone\@;          \
        STOREB(t0, N(dst), .Ls_exc_p1\@)

        COPY_BYTE(0)
        COPY_BYTE(1)
#ifdef USE_DOUBLE
        COPY_BYTE(2)
        COPY_BYTE(3)
        COPY_BYTE(4)
        COPY_BYTE(5)
#endif
        LOADB(t0, NBYTES-2(src), .Ll_exc\@)
        SUB     len, len, 1
        jr      ra
        STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
.Ldone\@:
        jr      ra
         nop

#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lcopy_unaligned_bytes\@:
1:
        COPY_BYTE(0)
        COPY_BYTE(1)
        COPY_BYTE(2)
        COPY_BYTE(3)
        COPY_BYTE(4)
        COPY_BYTE(5)
        COPY_BYTE(6)
        COPY_BYTE(7)
        ADD     src, src, 8
        b       1b
         ADD    dst, dst, 8
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
        .if __memcpy == 1
        END(memcpy)
        .set __memcpy, 0
        .hidden __memcpy
        .endif

.Ll_exc_copy\@:
        /*
         * Copy bytes from src until faulting load address (or until a
         * lb faults)
         *
         * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
         * may be more than a byte beyond the last address.
         * Hence, the lb below may get an exception.
         *
         * Assumes src < THREAD_BUADDR($28)
         */
        LOADK   t0, TI_TASK($28)
         nop
        LOADK   t0, THREAD_BUADDR(t0)
1:
        LOADB(t1, 0(src), .Ll_exc\@)
        ADD     src, src, 1
        sb      t1, 0(dst)      # can't fault -- we're copy_from_user
        .set    reorder                         /* DADDI_WAR */
        ADD     dst, dst, 1
        bne     src, t0, 1b
        .set    noreorder
.Ll_exc\@:
        LOADK   t0, TI_TASK($28)
         nop
        LOADK   t0, THREAD_BUADDR(t0)   # t0 is just past last good address
         nop
        SUB     len, AT, t0             # len number of uncopied bytes
        jr      ra
         nop

#define SEXC(n)                                                 \
        .set    reorder;                        /* DADDI_WAR */ \
.Ls_exc_p ## n ## u\@:                                          \
        ADD     len, len, n*NBYTES;                             \
        jr      ra;                                             \
        .set    noreorder

SEXC(8)
SEXC(7)
SEXC(6)
SEXC(5)
SEXC(4)
SEXC(3)
SEXC(2)
SEXC(1)

.Ls_exc_p1\@:
        .set    reorder                         /* DADDI_WAR */
        ADD     len, len, 1
        jr      ra
        .set    noreorder
.Ls_exc\@:
        jr      ra
         nop
        .endm

#ifndef CONFIG_HAVE_PLAT_MEMCPY
        .align  5
LEAF(memmove)
EXPORT_SYMBOL(memmove)
        ADD     t0, a0, a2
        ADD     t1, a1, a2
        sltu    t0, a1, t0                      # dst + len <= src -> memcpy
        sltu    t1, a0, t1                      # dst >= src + len -> memcpy
        and     t0, t1
        beqz    t0, .L__memcpy
         move   v0, a0                          /* return value */
        beqz    a2, .Lr_out
        END(memmove)

        /* fall through to __rmemcpy */
LEAF(__rmemcpy)                                 /* a0=dst a1=src a2=len */
         sltu   t0, a1, a0
        beqz    t0, .Lr_end_bytes_up            # src >= dst
         nop
        ADD     a0, a2                          # dst = dst + len
        ADD     a1, a2                          # src = src + len

.Lr_end_bytes:
        R10KCBARRIER(0(ra))
        lb      t0, -1(a1)
        SUB     a2, a2, 0x1
        sb      t0, -1(a0)
        SUB     a1, a1, 0x1
        .set    reorder                         /* DADDI_WAR */
        SUB     a0, a0, 0x1
        bnez    a2, .Lr_end_bytes
        .set    noreorder

.Lr_out:
        jr      ra
         move   a2, zero

.Lr_end_bytes_up:
        R10KCBARRIER(0(ra))
        lb      t0, (a1)
        SUB     a2, a2, 0x1
        sb      t0, (a0)
        ADD     a1, a1, 0x1
        .set    reorder                         /* DADDI_WAR */
        ADD     a0, a0, 0x1
        bnez    a2, .Lr_end_bytes_up
        .set    noreorder

        jr      ra
         move   a2, zero
        END(__rmemcpy)

/*
 * A combined memcpy/__copy_user
 * __copy_user sets len to 0 for success; else to an upper bound of
 * the number of uncopied bytes.
 * memcpy sets v0 to dst.
 */
        .align  5
LEAF(memcpy)                                    /* a0=dst a1=src a2=len */
EXPORT_SYMBOL(memcpy)
        move    v0, dst                         /* return value */
.L__memcpy:
#ifndef CONFIG_EVA
FEXPORT(__raw_copy_from_user)
EXPORT_SYMBOL(__raw_copy_from_user)
FEXPORT(__raw_copy_to_user)
EXPORT_SYMBOL(__raw_copy_to_user)
#endif
        /* Legacy Mode, user <-> user */
        __BUILD_COPY_USER LEGACY_MODE USEROP USEROP

#endif

#ifdef CONFIG_EVA

/*
 * For EVA we need distinct symbols for reading and writing to user space.
 * This is because we need to use specific EVA instructions to perform the
 * virtual <-> physical translation when a virtual address is actually in user
 * space
 */

/*
 * __copy_from_user (EVA)
 */

LEAF(__raw_copy_from_user)
EXPORT_SYMBOL(__raw_copy_from_user)
        __BUILD_COPY_USER EVA_MODE USEROP KERNELOP
END(__raw_copy_from_user)



/*
 * __copy_to_user (EVA)
 */

LEAF(__raw_copy_to_user)
EXPORT_SYMBOL(__raw_copy_to_user)
__BUILD_COPY_USER EVA_MODE KERNELOP USEROP
END(__raw_copy_to_user)

#endif