linux/arch/mips/pci/ops-bcm63xx.c
<<
>>
Prefs
   1/*
   2 * This file is subject to the terms and conditions of the GNU General Public
   3 * License.  See the file "COPYING" in the main directory of this archive
   4 * for more details.
   5 *
   6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
   7 */
   8
   9#include <linux/types.h>
  10#include <linux/pci.h>
  11#include <linux/kernel.h>
  12#include <linux/delay.h>
  13#include <linux/io.h>
  14
  15#include "pci-bcm63xx.h"
  16
  17/*
  18 * swizzle 32bits data to return only the needed part
  19 */
  20static int postprocess_read(u32 data, int where, unsigned int size)
  21{
  22        u32 ret;
  23
  24        ret = 0;
  25        switch (size) {
  26        case 1:
  27                ret = (data >> ((where & 3) << 3)) & 0xff;
  28                break;
  29        case 2:
  30                ret = (data >> ((where & 3) << 3)) & 0xffff;
  31                break;
  32        case 4:
  33                ret = data;
  34                break;
  35        }
  36        return ret;
  37}
  38
  39static int preprocess_write(u32 orig_data, u32 val, int where,
  40                            unsigned int size)
  41{
  42        u32 ret;
  43
  44        ret = 0;
  45        switch (size) {
  46        case 1:
  47                ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
  48                        (val << ((where & 3) << 3));
  49                break;
  50        case 2:
  51                ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
  52                        (val << ((where & 3) << 3));
  53                break;
  54        case 4:
  55                ret = val;
  56                break;
  57        }
  58        return ret;
  59}
  60
  61/*
  62 * setup hardware for a configuration cycle with given parameters
  63 */
  64static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
  65                                    unsigned int devfn, int where)
  66{
  67        unsigned int slot, func, reg;
  68        u32 val;
  69
  70        slot = PCI_SLOT(devfn);
  71        func = PCI_FUNC(devfn);
  72        reg = where >> 2;
  73
  74        /* sanity check */
  75        if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
  76                return 1;
  77
  78        if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
  79                return 1;
  80
  81        if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
  82                return 1;
  83
  84        /* ok, setup config access */
  85        val = (reg << MPI_L2PCFG_REG_SHIFT);
  86        val |= (func << MPI_L2PCFG_FUNC_SHIFT);
  87        val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
  88        val |= MPI_L2PCFG_CFG_USEREG_MASK;
  89        val |= MPI_L2PCFG_CFG_SEL_MASK;
  90        /* type 0 cycle for local bus, type 1 cycle for anything else */
  91        if (type != 0) {
  92                /* FIXME: how to specify bus ??? */
  93                val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
  94        }
  95        bcm_mpi_writel(val, MPI_L2PCFG_REG);
  96
  97        return 0;
  98}
  99
 100static int bcm63xx_do_cfg_read(int type, unsigned int busn,
 101                                unsigned int devfn, int where, int size,
 102                                u32 *val)
 103{
 104        u32 data;
 105
 106        /* two phase cycle, first we write address, then read data at
 107         * another location, caller already has a spinlock so no need
 108         * to add one here  */
 109        if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
 110                return PCIBIOS_DEVICE_NOT_FOUND;
 111        iob();
 112        data = le32_to_cpu(__raw_readl(pci_iospace_start));
 113        /* restore IO space normal behaviour */
 114        bcm_mpi_writel(0, MPI_L2PCFG_REG);
 115
 116        *val = postprocess_read(data, where, size);
 117
 118        return PCIBIOS_SUCCESSFUL;
 119}
 120
 121static int bcm63xx_do_cfg_write(int type, unsigned int busn,
 122                                 unsigned int devfn, int where, int size,
 123                                 u32 val)
 124{
 125        u32 data;
 126
 127        /* two phase cycle, first we write address, then write data to
 128         * another location, caller already has a spinlock so no need
 129         * to add one here  */
 130        if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
 131                return PCIBIOS_DEVICE_NOT_FOUND;
 132        iob();
 133
 134        data = le32_to_cpu(__raw_readl(pci_iospace_start));
 135        data = preprocess_write(data, val, where, size);
 136
 137        __raw_writel(cpu_to_le32(data), pci_iospace_start);
 138        wmb();
 139        /* no way to know the access is done, we have to wait */
 140        udelay(500);
 141        /* restore IO space normal behaviour */
 142        bcm_mpi_writel(0, MPI_L2PCFG_REG);
 143
 144        return PCIBIOS_SUCCESSFUL;
 145}
 146
 147static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
 148                             int where, int size, u32 *val)
 149{
 150        int type;
 151
 152        type = bus->parent ? 1 : 0;
 153
 154        if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
 155                return PCIBIOS_DEVICE_NOT_FOUND;
 156
 157        return bcm63xx_do_cfg_read(type, bus->number, devfn,
 158                                    where, size, val);
 159}
 160
 161static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
 162                              int where, int size, u32 val)
 163{
 164        int type;
 165
 166        type = bus->parent ? 1 : 0;
 167
 168        if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
 169                return PCIBIOS_DEVICE_NOT_FOUND;
 170
 171        return bcm63xx_do_cfg_write(type, bus->number, devfn,
 172                                     where, size, val);
 173}
 174
 175struct pci_ops bcm63xx_pci_ops = {
 176        .read   = bcm63xx_pci_read,
 177        .write  = bcm63xx_pci_write
 178};
 179
 180#ifdef CONFIG_CARDBUS
 181/*
 182 * emulate configuration read access on a cardbus bridge
 183 */
 184#define FAKE_CB_BRIDGE_SLOT     0x1e
 185
 186static int fake_cb_bridge_bus_number = -1;
 187
 188static struct {
 189        u16 pci_command;
 190        u8 cb_latency;
 191        u8 subordinate_busn;
 192        u8 cardbus_busn;
 193        u8 pci_busn;
 194        int bus_assigned;
 195        u16 bridge_control;
 196
 197        u32 mem_base0;
 198        u32 mem_limit0;
 199        u32 mem_base1;
 200        u32 mem_limit1;
 201
 202        u32 io_base0;
 203        u32 io_limit0;
 204        u32 io_base1;
 205        u32 io_limit1;
 206} fake_cb_bridge_regs;
 207
 208static int fake_cb_bridge_read(int where, int size, u32 *val)
 209{
 210        unsigned int reg;
 211        u32 data;
 212
 213        data = 0;
 214        reg = where >> 2;
 215        switch (reg) {
 216        case (PCI_VENDOR_ID >> 2):
 217        case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
 218                /* create dummy vendor/device id from our cpu id */
 219                data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
 220                break;
 221
 222        case (PCI_COMMAND >> 2):
 223                data = (PCI_STATUS_DEVSEL_SLOW << 16);
 224                data |= fake_cb_bridge_regs.pci_command;
 225                break;
 226
 227        case (PCI_CLASS_REVISION >> 2):
 228                data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
 229                break;
 230
 231        case (PCI_CACHE_LINE_SIZE >> 2):
 232                data = (PCI_HEADER_TYPE_CARDBUS << 16);
 233                break;
 234
 235        case (PCI_INTERRUPT_LINE >> 2):
 236                /* bridge control */
 237                data = (fake_cb_bridge_regs.bridge_control << 16);
 238                /* pin:intA line:0xff */
 239                data |= (0x1 << 8) | 0xff;
 240                break;
 241
 242        case (PCI_CB_PRIMARY_BUS >> 2):
 243                data = (fake_cb_bridge_regs.cb_latency << 24);
 244                data |= (fake_cb_bridge_regs.subordinate_busn << 16);
 245                data |= (fake_cb_bridge_regs.cardbus_busn << 8);
 246                data |= fake_cb_bridge_regs.pci_busn;
 247                break;
 248
 249        case (PCI_CB_MEMORY_BASE_0 >> 2):
 250                data = fake_cb_bridge_regs.mem_base0;
 251                break;
 252
 253        case (PCI_CB_MEMORY_LIMIT_0 >> 2):
 254                data = fake_cb_bridge_regs.mem_limit0;
 255                break;
 256
 257        case (PCI_CB_MEMORY_BASE_1 >> 2):
 258                data = fake_cb_bridge_regs.mem_base1;
 259                break;
 260
 261        case (PCI_CB_MEMORY_LIMIT_1 >> 2):
 262                data = fake_cb_bridge_regs.mem_limit1;
 263                break;
 264
 265        case (PCI_CB_IO_BASE_0 >> 2):
 266                /* | 1 for 32bits io support */
 267                data = fake_cb_bridge_regs.io_base0 | 0x1;
 268                break;
 269
 270        case (PCI_CB_IO_LIMIT_0 >> 2):
 271                data = fake_cb_bridge_regs.io_limit0;
 272                break;
 273
 274        case (PCI_CB_IO_BASE_1 >> 2):
 275                /* | 1 for 32bits io support */
 276                data = fake_cb_bridge_regs.io_base1 | 0x1;
 277                break;
 278
 279        case (PCI_CB_IO_LIMIT_1 >> 2):
 280                data = fake_cb_bridge_regs.io_limit1;
 281                break;
 282        }
 283
 284        *val = postprocess_read(data, where, size);
 285        return PCIBIOS_SUCCESSFUL;
 286}
 287
 288/*
 289 * emulate configuration write access on a cardbus bridge
 290 */
 291static int fake_cb_bridge_write(int where, int size, u32 val)
 292{
 293        unsigned int reg;
 294        u32 data, tmp;
 295        int ret;
 296
 297        ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
 298        if (ret != PCIBIOS_SUCCESSFUL)
 299                return ret;
 300
 301        data = preprocess_write(data, val, where, size);
 302
 303        reg = where >> 2;
 304        switch (reg) {
 305        case (PCI_COMMAND >> 2):
 306                fake_cb_bridge_regs.pci_command = (data & 0xffff);
 307                break;
 308
 309        case (PCI_CB_PRIMARY_BUS >> 2):
 310                fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
 311                fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
 312                fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
 313                fake_cb_bridge_regs.pci_busn = data & 0xff;
 314                if (fake_cb_bridge_regs.cardbus_busn)
 315                        fake_cb_bridge_regs.bus_assigned = 1;
 316                break;
 317
 318        case (PCI_INTERRUPT_LINE >> 2):
 319                tmp = (data >> 16) & 0xffff;
 320                /* disable memory prefetch support */
 321                tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
 322                tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
 323                fake_cb_bridge_regs.bridge_control = tmp;
 324                break;
 325
 326        case (PCI_CB_MEMORY_BASE_0 >> 2):
 327                fake_cb_bridge_regs.mem_base0 = data;
 328                break;
 329
 330        case (PCI_CB_MEMORY_LIMIT_0 >> 2):
 331                fake_cb_bridge_regs.mem_limit0 = data;
 332                break;
 333
 334        case (PCI_CB_MEMORY_BASE_1 >> 2):
 335                fake_cb_bridge_regs.mem_base1 = data;
 336                break;
 337
 338        case (PCI_CB_MEMORY_LIMIT_1 >> 2):
 339                fake_cb_bridge_regs.mem_limit1 = data;
 340                break;
 341
 342        case (PCI_CB_IO_BASE_0 >> 2):
 343                fake_cb_bridge_regs.io_base0 = data;
 344                break;
 345
 346        case (PCI_CB_IO_LIMIT_0 >> 2):
 347                fake_cb_bridge_regs.io_limit0 = data;
 348                break;
 349
 350        case (PCI_CB_IO_BASE_1 >> 2):
 351                fake_cb_bridge_regs.io_base1 = data;
 352                break;
 353
 354        case (PCI_CB_IO_LIMIT_1 >> 2):
 355                fake_cb_bridge_regs.io_limit1 = data;
 356                break;
 357        }
 358
 359        return PCIBIOS_SUCCESSFUL;
 360}
 361
 362static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
 363                           int where, int size, u32 *val)
 364{
 365        /* snoop access to slot 0x1e on root bus, we fake a cardbus
 366         * bridge at this location */
 367        if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
 368                fake_cb_bridge_bus_number = bus->number;
 369                return fake_cb_bridge_read(where, size, val);
 370        }
 371
 372        /* a  configuration  cycle for  the  device  behind the  cardbus
 373         * bridge is  actually done as a  type 0 cycle  on the primary
 374         * bus. This means that only  one device can be on the cardbus
 375         * bus */
 376        if (fake_cb_bridge_regs.bus_assigned &&
 377            bus->number == fake_cb_bridge_regs.cardbus_busn &&
 378            PCI_SLOT(devfn) == 0)
 379                return bcm63xx_do_cfg_read(0, 0,
 380                                           PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
 381                                           where, size, val);
 382
 383        return PCIBIOS_DEVICE_NOT_FOUND;
 384}
 385
 386static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
 387                            int where, int size, u32 val)
 388{
 389        if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
 390                fake_cb_bridge_bus_number = bus->number;
 391                return fake_cb_bridge_write(where, size, val);
 392        }
 393
 394        if (fake_cb_bridge_regs.bus_assigned &&
 395            bus->number == fake_cb_bridge_regs.cardbus_busn &&
 396            PCI_SLOT(devfn) == 0)
 397                return bcm63xx_do_cfg_write(0, 0,
 398                                            PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
 399                                            where, size, val);
 400
 401        return PCIBIOS_DEVICE_NOT_FOUND;
 402}
 403
 404struct pci_ops bcm63xx_cb_ops = {
 405        .read   = bcm63xx_cb_read,
 406        .write   = bcm63xx_cb_write,
 407};
 408
 409/*
 410 * only one IO window, so it  cannot be shared by PCI and cardbus, use
 411 * fixup to choose and detect unhandled configuration
 412 */
 413static void bcm63xx_fixup(struct pci_dev *dev)
 414{
 415        static int io_window = -1;
 416        int i, found, new_io_window;
 417        u32 val;
 418
 419        /* look for any io resource */
 420        found = 0;
 421        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 422                if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
 423                        found = 1;
 424                        break;
 425                }
 426        }
 427
 428        if (!found)
 429                return;
 430
 431        /* skip our fake bus with only cardbus bridge on it */
 432        if (dev->bus->number == fake_cb_bridge_bus_number)
 433                return;
 434
 435        /* find on which bus the device is */
 436        if (fake_cb_bridge_regs.bus_assigned &&
 437            dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
 438            PCI_SLOT(dev->devfn) == 0)
 439                new_io_window = 1;
 440        else
 441                new_io_window = 0;
 442
 443        if (new_io_window == io_window)
 444                return;
 445
 446        if (io_window != -1) {
 447                printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
 448                       "need IO, which hardware cannot do\n");
 449                return;
 450        }
 451
 452        printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
 453               (new_io_window == 0) ? "PCI" : "cardbus");
 454
 455        val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
 456        if (io_window)
 457                val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
 458        else
 459                val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
 460        bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
 461
 462        io_window = new_io_window;
 463}
 464
 465DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
 466#endif
 467
 468static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
 469{
 470        switch (bus->number) {
 471        case PCIE_BUS_BRIDGE:
 472                return PCI_SLOT(devfn) == 0;
 473        case PCIE_BUS_DEVICE:
 474                if (PCI_SLOT(devfn) == 0)
 475                        return bcm_pcie_readl(PCIE_DLSTATUS_REG)
 476                                        & DLSTATUS_PHYLINKUP;
 477                fallthrough;
 478        default:
 479                return false;
 480        }
 481}
 482
 483static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn,
 484                             int where, int size, u32 *val)
 485{
 486        u32 data;
 487        u32 reg = where & ~3;
 488
 489        if (!bcm63xx_pcie_can_access(bus, devfn))
 490                return PCIBIOS_DEVICE_NOT_FOUND;
 491
 492        if (bus->number == PCIE_BUS_DEVICE)
 493                reg += PCIE_DEVICE_OFFSET;
 494
 495        data = bcm_pcie_readl(reg);
 496
 497        *val = postprocess_read(data, where, size);
 498
 499        return PCIBIOS_SUCCESSFUL;
 500
 501}
 502
 503static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn,
 504                              int where, int size, u32 val)
 505{
 506        u32 data;
 507        u32 reg = where & ~3;
 508
 509        if (!bcm63xx_pcie_can_access(bus, devfn))
 510                return PCIBIOS_DEVICE_NOT_FOUND;
 511
 512        if (bus->number == PCIE_BUS_DEVICE)
 513                reg += PCIE_DEVICE_OFFSET;
 514
 515
 516        data = bcm_pcie_readl(reg);
 517
 518        data = preprocess_write(data, val, where, size);
 519        bcm_pcie_writel(data, reg);
 520
 521        return PCIBIOS_SUCCESSFUL;
 522}
 523
 524
 525struct pci_ops bcm63xx_pcie_ops = {
 526        .read   = bcm63xx_pcie_read,
 527        .write  = bcm63xx_pcie_write
 528};
 529