linux/arch/powerpc/sysdev/fsl_rio.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Freescale MPC85xx/MPC86xx RapidIO support
   4 *
   5 * Copyright 2009 Sysgo AG
   6 * Thomas Moll <thomas.moll@sysgo.com>
   7 * - fixed maintenance access routines, check for aligned access
   8 *
   9 * Copyright 2009 Integrated Device Technology, Inc.
  10 * Alex Bounine <alexandre.bounine@idt.com>
  11 * - Added Port-Write message handling
  12 * - Added Machine Check exception handling
  13 *
  14 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
  15 * Zhang Wei <wei.zhang@freescale.com>
  16 *
  17 * Copyright 2005 MontaVista Software, Inc.
  18 * Matt Porter <mporter@kernel.crashing.org>
  19 */
  20
  21#include <linux/init.h>
  22#include <linux/extable.h>
  23#include <linux/types.h>
  24#include <linux/dma-mapping.h>
  25#include <linux/interrupt.h>
  26#include <linux/device.h>
  27#include <linux/of_address.h>
  28#include <linux/of_irq.h>
  29#include <linux/of_platform.h>
  30#include <linux/delay.h>
  31#include <linux/slab.h>
  32
  33#include <linux/io.h>
  34#include <linux/uaccess.h>
  35#include <asm/machdep.h>
  36
  37#include "fsl_rio.h"
  38
  39#undef DEBUG_PW /* Port-Write debugging */
  40
  41#define RIO_PORT1_EDCSR         0x0640
  42#define RIO_PORT2_EDCSR         0x0680
  43#define RIO_PORT1_IECSR         0x10130
  44#define RIO_PORT2_IECSR         0x101B0
  45
  46#define RIO_GCCSR               0x13c
  47#define RIO_ESCSR               0x158
  48#define ESCSR_CLEAR             0x07120204
  49#define RIO_PORT2_ESCSR         0x178
  50#define RIO_CCSR                0x15c
  51#define RIO_LTLEDCSR_IER        0x80000000
  52#define RIO_LTLEDCSR_PRT        0x01000000
  53#define IECSR_CLEAR             0x80000000
  54#define RIO_ISR_AACR            0x10120
  55#define RIO_ISR_AACR_AA         0x1     /* Accept All ID */
  56
  57#define RIWTAR_TRAD_VAL_SHIFT   12
  58#define RIWTAR_TRAD_MASK        0x00FFFFFF
  59#define RIWBAR_BADD_VAL_SHIFT   12
  60#define RIWBAR_BADD_MASK        0x003FFFFF
  61#define RIWAR_ENABLE            0x80000000
  62#define RIWAR_TGINT_LOCAL       0x00F00000
  63#define RIWAR_RDTYP_NO_SNOOP    0x00040000
  64#define RIWAR_RDTYP_SNOOP       0x00050000
  65#define RIWAR_WRTYP_NO_SNOOP    0x00004000
  66#define RIWAR_WRTYP_SNOOP       0x00005000
  67#define RIWAR_WRTYP_ALLOC       0x00006000
  68#define RIWAR_SIZE_MASK         0x0000003F
  69
  70static DEFINE_SPINLOCK(fsl_rio_config_lock);
  71
  72#define __fsl_read_rio_config(x, addr, err, op)         \
  73        __asm__ __volatile__(                           \
  74                "1:     "op" %1,0(%2)\n"                \
  75                "       eieio\n"                        \
  76                "2:\n"                                  \
  77                ".section .fixup,\"ax\"\n"              \
  78                "3:     li %1,-1\n"                     \
  79                "       li %0,%3\n"                     \
  80                "       b 2b\n"                         \
  81                ".previous\n"                           \
  82                EX_TABLE(1b, 3b)                        \
  83                : "=r" (err), "=r" (x)                  \
  84                : "b" (addr), "i" (-EFAULT), "0" (err))
  85
  86void __iomem *rio_regs_win;
  87void __iomem *rmu_regs_win;
  88resource_size_t rio_law_start;
  89
  90struct fsl_rio_dbell *dbell;
  91struct fsl_rio_pw *pw;
  92
  93#ifdef CONFIG_E500
  94int fsl_rio_mcheck_exception(struct pt_regs *regs)
  95{
  96        const struct exception_table_entry *entry;
  97        unsigned long reason;
  98
  99        if (!rio_regs_win)
 100                return 0;
 101
 102        reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
 103        if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
 104                /* Check if we are prepared to handle this fault */
 105                entry = search_exception_tables(regs->nip);
 106                if (entry) {
 107                        pr_debug("RIO: %s - MC Exception handled\n",
 108                                 __func__);
 109                        out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
 110                                 0);
 111                        regs_set_recoverable(regs);
 112                        regs_set_return_ip(regs, extable_fixup(entry));
 113                        return 1;
 114                }
 115        }
 116
 117        return 0;
 118}
 119EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
 120#endif
 121
 122/**
 123 * fsl_local_config_read - Generate a MPC85xx local config space read
 124 * @mport: RapidIO master port info
 125 * @index: ID of RapdiIO interface
 126 * @offset: Offset into configuration space
 127 * @len: Length (in bytes) of the maintenance transaction
 128 * @data: Value to be read into
 129 *
 130 * Generates a MPC85xx local configuration space read. Returns %0 on
 131 * success or %-EINVAL on failure.
 132 */
 133static int fsl_local_config_read(struct rio_mport *mport,
 134                                int index, u32 offset, int len, u32 *data)
 135{
 136        struct rio_priv *priv = mport->priv;
 137        pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
 138                 offset);
 139        *data = in_be32(priv->regs_win + offset);
 140
 141        return 0;
 142}
 143
 144/**
 145 * fsl_local_config_write - Generate a MPC85xx local config space write
 146 * @mport: RapidIO master port info
 147 * @index: ID of RapdiIO interface
 148 * @offset: Offset into configuration space
 149 * @len: Length (in bytes) of the maintenance transaction
 150 * @data: Value to be written
 151 *
 152 * Generates a MPC85xx local configuration space write. Returns %0 on
 153 * success or %-EINVAL on failure.
 154 */
 155static int fsl_local_config_write(struct rio_mport *mport,
 156                                int index, u32 offset, int len, u32 data)
 157{
 158        struct rio_priv *priv = mport->priv;
 159        pr_debug
 160                ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
 161                index, offset, data);
 162        out_be32(priv->regs_win + offset, data);
 163
 164        return 0;
 165}
 166
 167/**
 168 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
 169 * @mport: RapidIO master port info
 170 * @index: ID of RapdiIO interface
 171 * @destid: Destination ID of transaction
 172 * @hopcount: Number of hops to target device
 173 * @offset: Offset into configuration space
 174 * @len: Length (in bytes) of the maintenance transaction
 175 * @val: Location to be read into
 176 *
 177 * Generates a MPC85xx read maintenance transaction. Returns %0 on
 178 * success or %-EINVAL on failure.
 179 */
 180static int
 181fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
 182                        u8 hopcount, u32 offset, int len, u32 *val)
 183{
 184        struct rio_priv *priv = mport->priv;
 185        unsigned long flags;
 186        u8 *data;
 187        u32 rval, err = 0;
 188
 189        pr_debug
 190                ("fsl_rio_config_read:"
 191                " index %d destid %d hopcount %d offset %8.8x len %d\n",
 192                index, destid, hopcount, offset, len);
 193
 194        /* 16MB maintenance window possible */
 195        /* allow only aligned access to maintenance registers */
 196        if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
 197                return -EINVAL;
 198
 199        spin_lock_irqsave(&fsl_rio_config_lock, flags);
 200
 201        out_be32(&priv->maint_atmu_regs->rowtar,
 202                 (destid << 22) | (hopcount << 12) | (offset >> 12));
 203        out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
 204
 205        data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 206        switch (len) {
 207        case 1:
 208                __fsl_read_rio_config(rval, data, err, "lbz");
 209                break;
 210        case 2:
 211                __fsl_read_rio_config(rval, data, err, "lhz");
 212                break;
 213        case 4:
 214                __fsl_read_rio_config(rval, data, err, "lwz");
 215                break;
 216        default:
 217                spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
 218                return -EINVAL;
 219        }
 220
 221        if (err) {
 222                pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
 223                         err, destid, hopcount, offset);
 224        }
 225
 226        spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
 227        *val = rval;
 228
 229        return err;
 230}
 231
 232/**
 233 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
 234 * @mport: RapidIO master port info
 235 * @index: ID of RapdiIO interface
 236 * @destid: Destination ID of transaction
 237 * @hopcount: Number of hops to target device
 238 * @offset: Offset into configuration space
 239 * @len: Length (in bytes) of the maintenance transaction
 240 * @val: Value to be written
 241 *
 242 * Generates an MPC85xx write maintenance transaction. Returns %0 on
 243 * success or %-EINVAL on failure.
 244 */
 245static int
 246fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 247                        u8 hopcount, u32 offset, int len, u32 val)
 248{
 249        struct rio_priv *priv = mport->priv;
 250        unsigned long flags;
 251        u8 *data;
 252        int ret = 0;
 253
 254        pr_debug
 255                ("fsl_rio_config_write:"
 256                " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
 257                index, destid, hopcount, offset, len, val);
 258
 259        /* 16MB maintenance windows possible */
 260        /* allow only aligned access to maintenance registers */
 261        if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
 262                return -EINVAL;
 263
 264        spin_lock_irqsave(&fsl_rio_config_lock, flags);
 265
 266        out_be32(&priv->maint_atmu_regs->rowtar,
 267                 (destid << 22) | (hopcount << 12) | (offset >> 12));
 268        out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
 269
 270        data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 271        switch (len) {
 272        case 1:
 273                out_8((u8 *) data, val);
 274                break;
 275        case 2:
 276                out_be16((u16 *) data, val);
 277                break;
 278        case 4:
 279                out_be32((u32 *) data, val);
 280                break;
 281        default:
 282                ret = -EINVAL;
 283        }
 284        spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
 285
 286        return ret;
 287}
 288
 289static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
 290{
 291        int i;
 292
 293        /* close inbound windows */
 294        for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
 295                out_be32(&priv->inb_atmu_regs[i].riwar, 0);
 296}
 297
 298int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
 299        u64 rstart, u64 size, u32 flags)
 300{
 301        struct rio_priv *priv = mport->priv;
 302        u32 base_size;
 303        unsigned int base_size_log;
 304        u64 win_start, win_end;
 305        u32 riwar;
 306        int i;
 307
 308        if ((size & (size - 1)) != 0 || size > 0x400000000ULL)
 309                return -EINVAL;
 310
 311        base_size_log = ilog2(size);
 312        base_size = 1 << base_size_log;
 313
 314        /* check if addresses are aligned with the window size */
 315        if (lstart & (base_size - 1))
 316                return -EINVAL;
 317        if (rstart & (base_size - 1))
 318                return -EINVAL;
 319
 320        /* check for conflicting ranges */
 321        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
 322                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
 323                if ((riwar & RIWAR_ENABLE) == 0)
 324                        continue;
 325                win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
 326                        << RIWBAR_BADD_VAL_SHIFT;
 327                win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
 328                if (rstart < win_end && (rstart + size) > win_start)
 329                        return -EINVAL;
 330        }
 331
 332        /* find unused atmu */
 333        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
 334                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
 335                if ((riwar & RIWAR_ENABLE) == 0)
 336                        break;
 337        }
 338        if (i >= RIO_INB_ATMU_COUNT)
 339                return -ENOMEM;
 340
 341        out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
 342        out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
 343        out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
 344                RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
 345
 346        return 0;
 347}
 348
 349void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
 350{
 351        u32 win_start_shift, base_start_shift;
 352        struct rio_priv *priv = mport->priv;
 353        u32 riwar, riwtar;
 354        int i;
 355
 356        /* skip default window */
 357        base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
 358        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
 359                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
 360                if ((riwar & RIWAR_ENABLE) == 0)
 361                        continue;
 362
 363                riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
 364                win_start_shift = riwtar & RIWTAR_TRAD_MASK;
 365                if (win_start_shift == base_start_shift) {
 366                        out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
 367                        return;
 368                }
 369        }
 370}
 371
 372void fsl_rio_port_error_handler(int offset)
 373{
 374        /*XXX: Error recovery is not implemented, we just clear errors */
 375        out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
 376
 377        if (offset == 0) {
 378                out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
 379                out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
 380                out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
 381        } else {
 382                out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
 383                out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
 384                out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
 385        }
 386}
 387static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 388{
 389        const char *str;
 390        if (ccsr & 1) {
 391                /* Serial phy */
 392                switch (ccsr >> 30) {
 393                case 0:
 394                        str = "1";
 395                        break;
 396                case 1:
 397                        str = "4";
 398                        break;
 399                default:
 400                        str = "Unknown";
 401                        break;
 402                }
 403                dev_info(dev, "Hardware port width: %s\n", str);
 404
 405                switch ((ccsr >> 27) & 7) {
 406                case 0:
 407                        str = "Single-lane 0";
 408                        break;
 409                case 1:
 410                        str = "Single-lane 2";
 411                        break;
 412                case 2:
 413                        str = "Four-lane";
 414                        break;
 415                default:
 416                        str = "Unknown";
 417                        break;
 418                }
 419                dev_info(dev, "Training connection status: %s\n", str);
 420        } else {
 421                /* Parallel phy */
 422                if (!(ccsr & 0x80000000))
 423                        dev_info(dev, "Output port operating in 8-bit mode\n");
 424                if (!(ccsr & 0x08000000))
 425                        dev_info(dev, "Input port operating in 8-bit mode\n");
 426        }
 427}
 428
 429/**
 430 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
 431 * @dev: platform_device pointer
 432 *
 433 * Initializes MPC85xx RapidIO hardware interface, configures
 434 * master port with system-specific info, and registers the
 435 * master port with the RapidIO subsystem.
 436 */
 437int fsl_rio_setup(struct platform_device *dev)
 438{
 439        struct rio_ops *ops;
 440        struct rio_mport *port;
 441        struct rio_priv *priv;
 442        int rc = 0;
 443        const u32 *dt_range, *cell, *port_index;
 444        u32 active_ports = 0;
 445        struct resource regs, rmu_regs;
 446        struct device_node *np, *rmu_node;
 447        int rlen;
 448        u32 ccsr;
 449        u64 range_start, range_size;
 450        int paw, aw, sw;
 451        u32 i;
 452        static int tmp;
 453        struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
 454
 455        if (!dev->dev.of_node) {
 456                dev_err(&dev->dev, "Device OF-Node is NULL");
 457                return -ENODEV;
 458        }
 459
 460        rc = of_address_to_resource(dev->dev.of_node, 0, &regs);
 461        if (rc) {
 462                dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
 463                                dev->dev.of_node);
 464                return -EFAULT;
 465        }
 466        dev_info(&dev->dev, "Of-device full name %pOF\n",
 467                        dev->dev.of_node);
 468        dev_info(&dev->dev, "Regs: %pR\n", &regs);
 469
 470        rio_regs_win = ioremap(regs.start, resource_size(&regs));
 471        if (!rio_regs_win) {
 472                dev_err(&dev->dev, "Unable to map rio register window\n");
 473                rc = -ENOMEM;
 474                goto err_rio_regs;
 475        }
 476
 477        ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
 478        if (!ops) {
 479                rc = -ENOMEM;
 480                goto err_ops;
 481        }
 482        ops->lcread = fsl_local_config_read;
 483        ops->lcwrite = fsl_local_config_write;
 484        ops->cread = fsl_rio_config_read;
 485        ops->cwrite = fsl_rio_config_write;
 486        ops->dsend = fsl_rio_doorbell_send;
 487        ops->pwenable = fsl_rio_pw_enable;
 488        ops->open_outb_mbox = fsl_open_outb_mbox;
 489        ops->open_inb_mbox = fsl_open_inb_mbox;
 490        ops->close_outb_mbox = fsl_close_outb_mbox;
 491        ops->close_inb_mbox = fsl_close_inb_mbox;
 492        ops->add_outb_message = fsl_add_outb_message;
 493        ops->add_inb_buffer = fsl_add_inb_buffer;
 494        ops->get_inb_message = fsl_get_inb_message;
 495        ops->map_inb = fsl_map_inb_mem;
 496        ops->unmap_inb = fsl_unmap_inb_mem;
 497
 498        rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
 499        if (!rmu_node) {
 500                dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
 501                rc = -ENOENT;
 502                goto err_rmu;
 503        }
 504        rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
 505        if (rc) {
 506                dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
 507                                rmu_node);
 508                goto err_rmu;
 509        }
 510        rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
 511        if (!rmu_regs_win) {
 512                dev_err(&dev->dev, "Unable to map rmu register window\n");
 513                rc = -ENOMEM;
 514                goto err_rmu;
 515        }
 516        for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
 517                rmu_np[tmp] = np;
 518                tmp++;
 519        }
 520
 521        /*set up doobell node*/
 522        np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
 523        if (!np) {
 524                dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
 525                rc = -ENODEV;
 526                goto err_dbell;
 527        }
 528        dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
 529        if (!(dbell)) {
 530                dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
 531                rc = -ENOMEM;
 532                goto err_dbell;
 533        }
 534        dbell->dev = &dev->dev;
 535        dbell->bellirq = irq_of_parse_and_map(np, 1);
 536        dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
 537
 538        aw = of_n_addr_cells(np);
 539        dt_range = of_get_property(np, "reg", &rlen);
 540        if (!dt_range) {
 541                pr_err("%pOF: unable to find 'reg' property\n",
 542                        np);
 543                rc = -ENOMEM;
 544                goto err_pw;
 545        }
 546        range_start = of_read_number(dt_range, aw);
 547        dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
 548                                (u32)range_start);
 549
 550        /*set up port write node*/
 551        np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
 552        if (!np) {
 553                dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
 554                rc = -ENODEV;
 555                goto err_pw;
 556        }
 557        pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
 558        if (!(pw)) {
 559                dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
 560                rc = -ENOMEM;
 561                goto err_pw;
 562        }
 563        pw->dev = &dev->dev;
 564        pw->pwirq = irq_of_parse_and_map(np, 0);
 565        dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
 566        aw = of_n_addr_cells(np);
 567        dt_range = of_get_property(np, "reg", &rlen);
 568        if (!dt_range) {
 569                pr_err("%pOF: unable to find 'reg' property\n",
 570                        np);
 571                rc = -ENOMEM;
 572                goto err;
 573        }
 574        range_start = of_read_number(dt_range, aw);
 575        pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
 576
 577        /*set up ports node*/
 578        for_each_child_of_node(dev->dev.of_node, np) {
 579                port_index = of_get_property(np, "cell-index", NULL);
 580                if (!port_index) {
 581                        dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n",
 582                                        np);
 583                        continue;
 584                }
 585
 586                dt_range = of_get_property(np, "ranges", &rlen);
 587                if (!dt_range) {
 588                        dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n",
 589                                        np);
 590                        continue;
 591                }
 592
 593                /* Get node address wide */
 594                cell = of_get_property(np, "#address-cells", NULL);
 595                if (cell)
 596                        aw = *cell;
 597                else
 598                        aw = of_n_addr_cells(np);
 599                /* Get node size wide */
 600                cell = of_get_property(np, "#size-cells", NULL);
 601                if (cell)
 602                        sw = *cell;
 603                else
 604                        sw = of_n_size_cells(np);
 605                /* Get parent address wide wide */
 606                paw = of_n_addr_cells(np);
 607                range_start = of_read_number(dt_range + aw, paw);
 608                range_size = of_read_number(dt_range + aw + paw, sw);
 609
 610                dev_info(&dev->dev, "%pOF: LAW start 0x%016llx, size 0x%016llx.\n",
 611                                np, range_start, range_size);
 612
 613                port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
 614                if (!port)
 615                        continue;
 616
 617                rc = rio_mport_initialize(port);
 618                if (rc) {
 619                        kfree(port);
 620                        continue;
 621                }
 622
 623                i = *port_index - 1;
 624                port->index = (unsigned char)i;
 625
 626                priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
 627                if (!priv) {
 628                        dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
 629                        kfree(port);
 630                        continue;
 631                }
 632
 633                INIT_LIST_HEAD(&port->dbells);
 634                port->iores.start = range_start;
 635                port->iores.end = port->iores.start + range_size - 1;
 636                port->iores.flags = IORESOURCE_MEM;
 637                port->iores.name = "rio_io_win";
 638
 639                if (request_resource(&iomem_resource, &port->iores) < 0) {
 640                        dev_err(&dev->dev, "RIO: Error requesting master port region"
 641                                " 0x%016llx-0x%016llx\n",
 642                                (u64)port->iores.start, (u64)port->iores.end);
 643                                kfree(priv);
 644                                kfree(port);
 645                                continue;
 646                }
 647                sprintf(port->name, "RIO mport %d", i);
 648
 649                priv->dev = &dev->dev;
 650                port->dev.parent = &dev->dev;
 651                port->ops = ops;
 652                port->priv = priv;
 653                port->phys_efptr = 0x100;
 654                port->phys_rmap = 1;
 655                priv->regs_win = rio_regs_win;
 656
 657                ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
 658
 659                /* Checking the port training status */
 660                if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
 661                        dev_err(&dev->dev, "Port %d is not ready. "
 662                        "Try to restart connection...\n", i);
 663                        /* Disable ports */
 664                        out_be32(priv->regs_win
 665                                + RIO_CCSR + i*0x20, 0);
 666                        /* Set 1x lane */
 667                        setbits32(priv->regs_win
 668                                + RIO_CCSR + i*0x20, 0x02000000);
 669                        /* Enable ports */
 670                        setbits32(priv->regs_win
 671                                + RIO_CCSR + i*0x20, 0x00600000);
 672                        msleep(100);
 673                        if (in_be32((priv->regs_win
 674                                        + RIO_ESCSR + i*0x20)) & 1) {
 675                                dev_err(&dev->dev,
 676                                        "Port %d restart failed.\n", i);
 677                                release_resource(&port->iores);
 678                                kfree(priv);
 679                                kfree(port);
 680                                continue;
 681                        }
 682                        dev_info(&dev->dev, "Port %d restart success!\n", i);
 683                }
 684                fsl_rio_info(&dev->dev, ccsr);
 685
 686                port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
 687                                        & RIO_PEF_CTLS) >> 4;
 688                dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
 689                                port->sys_size ? 65536 : 256);
 690
 691                if (port->host_deviceid >= 0)
 692                        out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
 693                                RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
 694                else
 695                        out_be32(priv->regs_win + RIO_GCCSR,
 696                                RIO_PORT_GEN_MASTER);
 697
 698                priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
 699                        + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
 700                        RIO_ATMU_REGS_PORT2_OFFSET));
 701
 702                priv->maint_atmu_regs = priv->atmu_regs + 1;
 703                priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
 704                        (priv->regs_win +
 705                        ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
 706                        RIO_INB_ATMU_REGS_PORT2_OFFSET));
 707
 708                /* Set to receive packets with any dest ID */
 709                out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80),
 710                         RIO_ISR_AACR_AA);
 711
 712                /* Configure maintenance transaction window */
 713                out_be32(&priv->maint_atmu_regs->rowbar,
 714                        port->iores.start >> 12);
 715                out_be32(&priv->maint_atmu_regs->rowar,
 716                         0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
 717
 718                priv->maint_win = ioremap(port->iores.start,
 719                                RIO_MAINT_WIN_SIZE);
 720
 721                rio_law_start = range_start;
 722
 723                fsl_rio_setup_rmu(port, rmu_np[i]);
 724                fsl_rio_inbound_mem_init(priv);
 725
 726                dbell->mport[i] = port;
 727                pw->mport[i] = port;
 728
 729                if (rio_register_mport(port)) {
 730                        release_resource(&port->iores);
 731                        kfree(priv);
 732                        kfree(port);
 733                        continue;
 734                }
 735                active_ports++;
 736        }
 737
 738        if (!active_ports) {
 739                rc = -ENOLINK;
 740                goto err;
 741        }
 742
 743        fsl_rio_doorbell_init(dbell);
 744        fsl_rio_port_write_init(pw);
 745
 746        return 0;
 747err:
 748        kfree(pw);
 749        pw = NULL;
 750err_pw:
 751        kfree(dbell);
 752        dbell = NULL;
 753err_dbell:
 754        iounmap(rmu_regs_win);
 755        rmu_regs_win = NULL;
 756err_rmu:
 757        kfree(ops);
 758err_ops:
 759        iounmap(rio_regs_win);
 760        rio_regs_win = NULL;
 761err_rio_regs:
 762        return rc;
 763}
 764
 765/* The probe function for RapidIO peer-to-peer network.
 766 */
 767static int fsl_of_rio_rpn_probe(struct platform_device *dev)
 768{
 769        printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n",
 770                        dev->dev.of_node);
 771
 772        return fsl_rio_setup(dev);
 773};
 774
 775static const struct of_device_id fsl_of_rio_rpn_ids[] = {
 776        {
 777                .compatible = "fsl,srio",
 778        },
 779        {},
 780};
 781
 782static struct platform_driver fsl_of_rio_rpn_driver = {
 783        .driver = {
 784                .name = "fsl-of-rio",
 785                .of_match_table = fsl_of_rio_rpn_ids,
 786        },
 787        .probe = fsl_of_rio_rpn_probe,
 788};
 789
 790static __init int fsl_of_rio_rpn_init(void)
 791{
 792        return platform_driver_register(&fsl_of_rio_rpn_driver);
 793}
 794
 795subsys_initcall(fsl_of_rio_rpn_init);
 796