// SPDX-License-Identifier: GPL-2.0
#include <linux/moduleloader.h>
#include <linux/workqueue.h>
#include <linux/netdevice.h>
#include <linux/filter.h>
#include <linux/cache.h>
#include <linux/if_vlan.h>

#include <asm/cacheflush.h>
#include <asm/ptrace.h>

#include "bpf_jit_32.h"

static inline bool is_simm13(unsigned int value)
{
        return value + 0x1000 < 0x2000;
}

#define SEEN_DATAREF 1 /* might call external helpers */
#define SEEN_XREG    2 /* ebx is used */
#define SEEN_MEM     4 /* use mem[] for temporary storage */

#define S13(X)          ((X) & 0x1fff)
#define IMMED           0x00002000
#define RD(X)           ((X) << 25)
#define RS1(X)          ((X) << 14)
#define RS2(X)          ((X))
#define OP(X)           ((X) << 30)
#define OP2(X)          ((X) << 22)
#define OP3(X)          ((X) << 19)
#define COND(X)         ((X) << 25)
#define F1(X)           OP(X)
#define F2(X, Y)        (OP(X) | OP2(Y))
#define F3(X, Y)        (OP(X) | OP3(Y))

#define CONDN           COND(0x0)
#define CONDE           COND(0x1)
#define CONDLE          COND(0x2)
#define CONDL           COND(0x3)
#define CONDLEU         COND(0x4)
#define CONDCS          COND(0x5)
#define CONDNEG         COND(0x6)
#define CONDVC          COND(0x7)
#define CONDA           COND(0x8)
#define CONDNE          COND(0x9)
#define CONDG           COND(0xa)
#define CONDGE          COND(0xb)
#define CONDGU          COND(0xc)
#define CONDCC          COND(0xd)
#define CONDPOS         COND(0xe)
#define CONDVS          COND(0xf)

#define CONDGEU         CONDCC
#define CONDLU          CONDCS

#define WDISP22(X)      (((X) >> 2) & 0x3fffff)

#define BA              (F2(0, 2) | CONDA)
#define BGU             (F2(0, 2) | CONDGU)
#define BLEU            (F2(0, 2) | CONDLEU)
#define BGEU            (F2(0, 2) | CONDGEU)
#define BLU             (F2(0, 2) | CONDLU)
#define BE              (F2(0, 2) | CONDE)
#define BNE             (F2(0, 2) | CONDNE)

#define BE_PTR          BE

#define SETHI(K, REG)   \
        (F2(0, 0x4) | RD(REG) | (((K) >> 10) & 0x3fffff))
#define OR_LO(K, REG)   \
        (F3(2, 0x02) | IMMED | RS1(REG) | ((K) & 0x3ff) | RD(REG))

#define ADD             F3(2, 0x00)
#define AND             F3(2, 0x01)
#define ANDCC           F3(2, 0x11)
#define OR              F3(2, 0x02)
#define XOR             F3(2, 0x03)
#define SUB             F3(2, 0x04)
#define SUBCC           F3(2, 0x14)
#define MUL             F3(2, 0x0a)     /* umul */
#define DIV             F3(2, 0x0e)     /* udiv */
#define SLL             F3(2, 0x25)
#define SRL             F3(2, 0x26)
#define JMPL            F3(2, 0x38)
#define CALL            F1(1)
#define BR              F2(0, 0x01)
#define RD_Y            F3(2, 0x28)
#define WR_Y            F3(2, 0x30)

#define LD32            F3(3, 0x00)
#define LD8             F3(3, 0x01)
#define LD16            F3(3, 0x02)
#define LD64            F3(3, 0x0b)
#define ST32            F3(3, 0x04)

#define LDPTR           LD32
#define BASE_STACKFRAME 96

#define LD32I           (LD32 | IMMED)
#define LD8I            (LD8 | IMMED)
#define LD16I           (LD16 | IMMED)
#define LD64I           (LD64 | IMMED)
#define LDPTRI          (LDPTR | IMMED)
#define ST32I           (ST32 | IMMED)

#define emit_nop()              \
do {                            \
        *prog++ = SETHI(0, G0); \
} while (0)

#define emit_neg()                                      \
do {    /* sub %g0, r_A, r_A */                         \
        *prog++ = SUB | RS1(G0) | RS2(r_A) | RD(r_A);   \
} while (0)

#define emit_reg_move(FROM, TO)                         \
do {    /* or %g0, FROM, TO */                          \
        *prog++ = OR | RS1(G0) | RS2(FROM) | RD(TO);    \
} while (0)

#define emit_clear(REG)                                 \
do {    /* or %g0, %g0, REG */                          \
        *prog++ = OR | RS1(G0) | RS2(G0) | RD(REG);     \
} while (0)

#define emit_set_const(K, REG)                                  \
do {    /* sethi %hi(K), REG */                                 \
        *prog++ = SETHI(K, REG);                                \
        /* or REG, %lo(K), REG */                               \
        *prog++ = OR_LO(K, REG);                                \
} while (0)

        /* Emit
         *
         *      OP      r_A, r_X, r_A
         */
#define emit_alu_X(OPCODE)                                      \
do {                                                            \
        seen |= SEEN_XREG;                                      \
        *prog++ = OPCODE | RS1(r_A) | RS2(r_X) | RD(r_A);       \
} while (0)

        /* Emit either:
         *
         *      OP      r_A, K, r_A
         *
         * or
         *
         *      sethi   %hi(K), r_TMP
         *      or      r_TMP, %lo(K), r_TMP
         *      OP      r_A, r_TMP, r_A
         *
         * depending upon whether K fits in a signed 13-bit
         * immediate instruction field.  Emit nothing if K
         * is zero.
         */
#define emit_alu_K(OPCODE, K)                                   \
do {                                                            \
        if (K || OPCODE == AND || OPCODE == MUL) {              \
                unsigned int _insn = OPCODE;                    \
                _insn |= RS1(r_A) | RD(r_A);                    \
                if (is_simm13(K)) {                             \
                        *prog++ = _insn | IMMED | S13(K);       \
                } else {                                        \
                        emit_set_const(K, r_TMP);               \
                        *prog++ = _insn | RS2(r_TMP);           \
                }                                               \
        }                                                       \
} while (0)

#define emit_loadimm(K, DEST)                                           \
do {                                                                    \
        if (is_simm13(K)) {                                             \
                /* or %g0, K, DEST */                                   \
                *prog++ = OR | IMMED | RS1(G0) | S13(K) | RD(DEST);     \
        } else {                                                        \
                emit_set_const(K, DEST);                                \
        }                                                               \
} while (0)

#define emit_loadptr(BASE, STRUCT, FIELD, DEST)                         \
do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
        BUILD_BUG_ON(sizeof_field(STRUCT, FIELD) != sizeof(void *));    \
        *prog++ = LDPTRI | RS1(BASE) | S13(_off) | RD(DEST);            \
} while (0)

#define emit_load32(BASE, STRUCT, FIELD, DEST)                          \
do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
        BUILD_BUG_ON(sizeof_field(STRUCT, FIELD) != sizeof(u32));       \
        *prog++ = LD32I | RS1(BASE) | S13(_off) | RD(DEST);             \
} while (0)

#define emit_load16(BASE, STRUCT, FIELD, DEST)                          \
do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
        BUILD_BUG_ON(sizeof_field(STRUCT, FIELD) != sizeof(u16));       \
        *prog++ = LD16I | RS1(BASE) | S13(_off) | RD(DEST);             \
} while (0)

#define __emit_load8(BASE, STRUCT, FIELD, DEST)                         \
do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
        *prog++ = LD8I | RS1(BASE) | S13(_off) | RD(DEST);              \
} while (0)

#define emit_load8(BASE, STRUCT, FIELD, DEST)                           \
do {    BUILD_BUG_ON(sizeof_field(STRUCT, FIELD) != sizeof(u8));        \
        __emit_load8(BASE, STRUCT, FIELD, DEST);                        \
} while (0)

#define BIAS (-4)

#define emit_ldmem(OFF, DEST)                                           \
do {    *prog++ = LD32I | RS1(SP) | S13(BIAS - (OFF)) | RD(DEST);       \
} while (0)

#define emit_stmem(OFF, SRC)                                            \
do {    *prog++ = ST32I | RS1(SP) | S13(BIAS - (OFF)) | RD(SRC);        \
} while (0)

#ifdef CONFIG_SMP
#define emit_load_cpu(REG)                                              \
        emit_load32(G6, struct thread_info, cpu, REG)
#else
#define emit_load_cpu(REG)      emit_clear(REG)
#endif

#define emit_skb_loadptr(FIELD, DEST) \
        emit_loadptr(r_SKB, struct sk_buff, FIELD, DEST)
#define emit_skb_load32(FIELD, DEST) \
        emit_load32(r_SKB, struct sk_buff, FIELD, DEST)
#define emit_skb_load16(FIELD, DEST) \
        emit_load16(r_SKB, struct sk_buff, FIELD, DEST)
#define __emit_skb_load8(FIELD, DEST) \
        __emit_load8(r_SKB, struct sk_buff, FIELD, DEST)
#define emit_skb_load8(FIELD, DEST) \
        emit_load8(r_SKB, struct sk_buff, FIELD, DEST)

#define emit_jmpl(BASE, IMM_OFF, LREG) \
        *prog++ = (JMPL | IMMED | RS1(BASE) | S13(IMM_OFF) | RD(LREG))

#define emit_call(FUNC)                                 \
do {    void *_here = image + addrs[i] - 8;             \
        unsigned int _off = (void *)(FUNC) - _here;     \
        *prog++ = CALL | (((_off) >> 2) & 0x3fffffff);  \
        emit_nop();                                     \
} while (0)

#define emit_branch(BR_OPC, DEST)                       \
do {    unsigned int _here = addrs[i] - 8;              \
        *prog++ = BR_OPC | WDISP22((DEST) - _here);     \
} while (0)

#define emit_branch_off(BR_OPC, OFF)                    \
do {    *prog++ = BR_OPC | WDISP22(OFF);                \
} while (0)

#define emit_jump(DEST)         emit_branch(BA, DEST)

#define emit_read_y(REG)        *prog++ = RD_Y | RD(REG)
#define emit_write_y(REG)       *prog++ = WR_Y | IMMED | RS1(REG) | S13(0)

#define emit_cmp(R1, R2) \
        *prog++ = (SUBCC | RS1(R1) | RS2(R2) | RD(G0))

#define emit_cmpi(R1, IMM) \
        *prog++ = (SUBCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));

#define emit_btst(R1, R2) \
        *prog++ = (ANDCC | RS1(R1) | RS2(R2) | RD(G0))

#define emit_btsti(R1, IMM) \
        *prog++ = (ANDCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));

#define emit_sub(R1, R2, R3) \
        *prog++ = (SUB | RS1(R1) | RS2(R2) | RD(R3))

#define emit_subi(R1, IMM, R3) \
        *prog++ = (SUB | IMMED | RS1(R1) | S13(IMM) | RD(R3))

#define emit_add(R1, R2, R3) \
        *prog++ = (ADD | RS1(R1) | RS2(R2) | RD(R3))

#define emit_addi(R1, IMM, R3) \
        *prog++ = (ADD | IMMED | RS1(R1) | S13(IMM) | RD(R3))

#define emit_and(R1, R2, R3) \
        *prog++ = (AND | RS1(R1) | RS2(R2) | RD(R3))

#define emit_andi(R1, IMM, R3) \
        *prog++ = (AND | IMMED | RS1(R1) | S13(IMM) | RD(R3))

#define emit_alloc_stack(SZ) \
        *prog++ = (SUB | IMMED | RS1(SP) | S13(SZ) | RD(SP))

#define emit_release_stack(SZ) \
        *prog++ = (ADD | IMMED | RS1(SP) | S13(SZ) | RD(SP))

/* A note about branch offset calculations.  The addrs[] array,
 * indexed by BPF instruction, records the address after all the
 * sparc instructions emitted for that BPF instruction.
 *
 * The most common case is to emit a branch at the end of such
 * a code sequence.  So this would be two instructions, the
 * branch and it's delay slot.
 *
 * Therefore by default the branch emitters calculate the branch
 * offset field as:
 *
 *      destination - (addrs[i] - 8)
 *
 * This "addrs[i] - 8" is the address of the branch itself or
 * what "." would be in assembler notation.  The "8" part is
 * how we take into consideration the branch and it's delay
 * slot mentioned above.
 *
 * Sometimes we need to emit a branch earlier in the code
 * sequence.  And in these situations we adjust "destination"
 * to accommodate this difference.  For example, if we needed
 * to emit a branch (and it's delay slot) right before the
 * final instruction emitted for a BPF opcode, we'd use
 * "destination + 4" instead of just plain "destination" above.
 *
 * This is why you see all of these funny emit_branch() and
 * emit_jump() calls with adjusted offsets.
 */

void bpf_jit_compile(struct bpf_prog *fp)
{
        unsigned int cleanup_addr, proglen, oldproglen = 0;
        u32 temp[8], *prog, *func, seen = 0, pass;
        const struct sock_filter *filter = fp->insns;
        int i, flen = fp->len, pc_ret0 = -1;
        unsigned int *addrs;
        void *image;

        if (!bpf_jit_enable)
                return;

        addrs = kmalloc_array(flen, sizeof(*addrs), GFP_KERNEL);
        if (addrs == NULL)
                return;

        /* Before first pass, make a rough estimation of addrs[]
         * each bpf instruction is translated to less than 64 bytes
         */
        for (proglen = 0, i = 0; i < flen; i++) {
                proglen += 64;
                addrs[i] = proglen;
        }
        cleanup_addr = proglen; /* epilogue address */
        image = NULL;
        for (pass = 0; pass < 10; pass++) {
                u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;

                /* no prologue/epilogue for trivial filters (RET something) */
                proglen = 0;
                prog = temp;

                /* Prologue */
                if (seen_or_pass0) {
                        if (seen_or_pass0 & SEEN_MEM) {
                                unsigned int sz = BASE_STACKFRAME;
                                sz += BPF_MEMWORDS * sizeof(u32);
                                emit_alloc_stack(sz);
                        }

                        /* Make sure we dont leek kernel memory. */
                        if (seen_or_pass0 & SEEN_XREG)
                                emit_clear(r_X);

                        /* If this filter needs to access skb data,
                         * load %o4 and %o5 with:
                         *  %o4 = skb->len - skb->data_len
                         *  %o5 = skb->data
                         * And also back up %o7 into r_saved_O7 so we can
                         * invoke the stubs using 'call'.
                         */
                        if (seen_or_pass0 & SEEN_DATAREF) {
                                emit_load32(r_SKB, struct sk_buff, len, r_HEADLEN);
                                emit_load32(r_SKB, struct sk_buff, data_len, r_TMP);
                                emit_sub(r_HEADLEN, r_TMP, r_HEADLEN);
                                emit_loadptr(r_SKB, struct sk_buff, data, r_SKB_DATA);
                        }
                }
                emit_reg_move(O7, r_saved_O7);

                /* Make sure we dont leak kernel information to the user. */
                if (bpf_needs_clear_a(&filter[0]))
                        emit_clear(r_A); /* A = 0 */

                for (i = 0; i < flen; i++) {
                        unsigned int K = filter[i].k;
                        unsigned int t_offset;
                        unsigned int f_offset;
                        u32 t_op, f_op;
                        u16 code = bpf_anc_helper(&filter[i]);
                        int ilen;

                        switch (code) {
                        case BPF_ALU | BPF_ADD | BPF_X: /* A += X; */
                                emit_alu_X(ADD);
                                break;
                        case BPF_ALU | BPF_ADD | BPF_K: /* A += K; */
                                emit_alu_K(ADD, K);
                                break;
                        case BPF_ALU | BPF_SUB | BPF_X: /* A -= X; */
                                emit_alu_X(SUB);
                                break;
                        case BPF_ALU | BPF_SUB | BPF_K: /* A -= K */
                                emit_alu_K(SUB, K);
                                break;
                        case BPF_ALU | BPF_AND | BPF_X: /* A &= X */
                                emit_alu_X(AND);
                                break;
                        case BPF_ALU | BPF_AND | BPF_K: /* A &= K */
                                emit_alu_K(AND, K);
                                break;
                        case BPF_ALU | BPF_OR | BPF_X:  /* A |= X */
                                emit_alu_X(OR);
                                break;
                        case BPF_ALU | BPF_OR | BPF_K:  /* A |= K */
                                emit_alu_K(OR, K);
                                break;
                        case BPF_ANC | SKF_AD_ALU_XOR_X: /* A ^= X; */
                        case BPF_ALU | BPF_XOR | BPF_X:
                                emit_alu_X(XOR);
                                break;
                        case BPF_ALU | BPF_XOR | BPF_K: /* A ^= K */
                                emit_alu_K(XOR, K);
                                break;
                        case BPF_ALU | BPF_LSH | BPF_X: /* A <<= X */
                                emit_alu_X(SLL);
                                break;
                        case BPF_ALU | BPF_LSH | BPF_K: /* A <<= K */
                                emit_alu_K(SLL, K);
                                break;
                        case BPF_ALU | BPF_RSH | BPF_X: /* A >>= X */
                                emit_alu_X(SRL);
                                break;
                        case BPF_ALU | BPF_RSH | BPF_K: /* A >>= K */
                                emit_alu_K(SRL, K);
                                break;
                        case BPF_ALU | BPF_MUL | BPF_X: /* A *= X; */
                                emit_alu_X(MUL);
                                break;
                        case BPF_ALU | BPF_MUL | BPF_K: /* A *= K */
                                emit_alu_K(MUL, K);
                                break;
                        case BPF_ALU | BPF_DIV | BPF_K: /* A /= K with K != 0*/
                                if (K == 1)
                                        break;
                                emit_write_y(G0);
                                /* The Sparc v8 architecture requires
                                 * three instructions between a %y
                                 * register write and the first use.
                                 */
                                emit_nop();
                                emit_nop();
                                emit_nop();
                                emit_alu_K(DIV, K);
                                break;
                        case BPF_ALU | BPF_DIV | BPF_X: /* A /= X; */
                                emit_cmpi(r_X, 0);
                                if (pc_ret0 > 0) {
                                        t_offset = addrs[pc_ret0 - 1];
                                        emit_branch(BE, t_offset + 20);
                                        emit_nop(); /* delay slot */
                                } else {
                                        emit_branch_off(BNE, 16);
                                        emit_nop();
                                        emit_jump(cleanup_addr + 20);
                                        emit_clear(r_A);
                                }
                                emit_write_y(G0);
                                /* The Sparc v8 architecture requires
                                 * three instructions between a %y
                                 * register write and the first use.
                                 */
                                emit_nop();
                                emit_nop();
                                emit_nop();
                                emit_alu_X(DIV);
                                break;
                        case BPF_ALU | BPF_NEG:
                                emit_neg();
                                break;
                        case BPF_RET | BPF_K:
                                if (!K) {
                                        if (pc_ret0 == -1)
                                                pc_ret0 = i;
                                        emit_clear(r_A);
                                } else {
                                        emit_loadimm(K, r_A);
                                }
                                fallthrough;
                        case BPF_RET | BPF_A:
                                if (seen_or_pass0) {
                                        if (i != flen - 1) {
                                                emit_jump(cleanup_addr);
                                                emit_nop();
                                                break;
                                        }
                                        if (seen_or_pass0 & SEEN_MEM) {
                                                unsigned int sz = BASE_STACKFRAME;
                                                sz += BPF_MEMWORDS * sizeof(u32);
                                                emit_release_stack(sz);
                                        }
                                }
                                /* jmpl %r_saved_O7 + 8, %g0 */
                                emit_jmpl(r_saved_O7, 8, G0);
                                emit_reg_move(r_A, O0); /* delay slot */
                                break;
                        case BPF_MISC | BPF_TAX:
                                seen |= SEEN_XREG;
                                emit_reg_move(r_A, r_X);
                                break;
                        case BPF_MISC | BPF_TXA:
                                seen |= SEEN_XREG;
                                emit_reg_move(r_X, r_A);
                                break;
                        case BPF_ANC | SKF_AD_CPU:
                                emit_load_cpu(r_A);
                                break;
                        case BPF_ANC | SKF_AD_PROTOCOL:
                                emit_skb_load16(protocol, r_A);
                                break;
                        case BPF_ANC | SKF_AD_PKTTYPE:
                                __emit_skb_load8(__pkt_type_offset, r_A);
                                emit_andi(r_A, PKT_TYPE_MAX, r_A);
                                emit_alu_K(SRL, 5);
                                break;
                        case BPF_ANC | SKF_AD_IFINDEX:
                                emit_skb_loadptr(dev, r_A);
                                emit_cmpi(r_A, 0);
                                emit_branch(BE_PTR, cleanup_addr + 4);
                                emit_nop();
                                emit_load32(r_A, struct net_device, ifindex, r_A);
                                break;
                        case BPF_ANC | SKF_AD_MARK:
                                emit_skb_load32(mark, r_A);
                                break;
                        case BPF_ANC | SKF_AD_QUEUE:
                                emit_skb_load16(queue_mapping, r_A);
                                break;
                        case BPF_ANC | SKF_AD_HATYPE:
                                emit_skb_loadptr(dev, r_A);
                                emit_cmpi(r_A, 0);
                                emit_branch(BE_PTR, cleanup_addr + 4);
                                emit_nop();
                                emit_load16(r_A, struct net_device, type, r_A);
                                break;
                        case BPF_ANC | SKF_AD_RXHASH:
                                emit_skb_load32(hash, r_A);
                                break;
                        case BPF_ANC | SKF_AD_VLAN_TAG:
                                emit_skb_load16(vlan_tci, r_A);
                                break;
                        case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
                                __emit_skb_load8(__pkt_vlan_present_offset, r_A);
                                if (PKT_VLAN_PRESENT_BIT)
                                        emit_alu_K(SRL, PKT_VLAN_PRESENT_BIT);
                                if (PKT_VLAN_PRESENT_BIT < 7)
                                        emit_andi(r_A, 1, r_A);
                                break;
                        case BPF_LD | BPF_W | BPF_LEN:
                                emit_skb_load32(len, r_A);
                                break;
                        case BPF_LDX | BPF_W | BPF_LEN:
                                emit_skb_load32(len, r_X);
                                break;
                        case BPF_LD | BPF_IMM:
                                emit_loadimm(K, r_A);
                                break;
                        case BPF_LDX | BPF_IMM:
                                emit_loadimm(K, r_X);
                                break;
                        case BPF_LD | BPF_MEM:
                                seen |= SEEN_MEM;
                                emit_ldmem(K * 4, r_A);
                                break;
                        case BPF_LDX | BPF_MEM:
                                seen |= SEEN_MEM | SEEN_XREG;
                                emit_ldmem(K * 4, r_X);
                                break;
                        case BPF_ST:
                                seen |= SEEN_MEM;
                                emit_stmem(K * 4, r_A);
                                break;
                        case BPF_STX:
                                seen |= SEEN_MEM | SEEN_XREG;
                                emit_stmem(K * 4, r_X);
                                break;

#define CHOOSE_LOAD_FUNC(K, func) \
        ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)

                        case BPF_LD | BPF_W | BPF_ABS:
                                func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_word);
common_load:                    seen |= SEEN_DATAREF;
                                emit_loadimm(K, r_OFF);
                                emit_call(func);
                                break;
                        case BPF_LD | BPF_H | BPF_ABS:
                                func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_half);
                                goto common_load;
                        case BPF_LD | BPF_B | BPF_ABS:
                                func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte);
                                goto common_load;
                        case BPF_LDX | BPF_B | BPF_MSH:
                                func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte_msh);
                                goto common_load;
                        case BPF_LD | BPF_W | BPF_IND:
                                func = bpf_jit_load_word;
common_load_ind:                seen |= SEEN_DATAREF | SEEN_XREG;
                                if (K) {
                                        if (is_simm13(K)) {
                                                emit_addi(r_X, K, r_OFF);
                                        } else {
                                                emit_loadimm(K, r_TMP);
                                                emit_add(r_X, r_TMP, r_OFF);
                                        }
                                } else {
                                        emit_reg_move(r_X, r_OFF);
                                }
                                emit_call(func);
                                break;
                        case BPF_LD | BPF_H | BPF_IND:
                                func = bpf_jit_load_half;
                                goto common_load_ind;
                        case BPF_LD | BPF_B | BPF_IND:
                                func = bpf_jit_load_byte;
                                goto common_load_ind;
                        case BPF_JMP | BPF_JA:
                                emit_jump(addrs[i + K]);
                                emit_nop();
                                break;

#define COND_SEL(CODE, TOP, FOP)        \
        case CODE:                      \
                t_op = TOP;             \
                f_op = FOP;             \
                goto cond_branch

                        COND_SEL(BPF_JMP | BPF_JGT | BPF_K, BGU, BLEU);
                        COND_SEL(BPF_JMP | BPF_JGE | BPF_K, BGEU, BLU);
                        COND_SEL(BPF_JMP | BPF_JEQ | BPF_K, BE, BNE);
                        COND_SEL(BPF_JMP | BPF_JSET | BPF_K, BNE, BE);
                        COND_SEL(BPF_JMP | BPF_JGT | BPF_X, BGU, BLEU);
                        COND_SEL(BPF_JMP | BPF_JGE | BPF_X, BGEU, BLU);
                        COND_SEL(BPF_JMP | BPF_JEQ | BPF_X, BE, BNE);
                        COND_SEL(BPF_JMP | BPF_JSET | BPF_X, BNE, BE);

cond_branch:                    f_offset = addrs[i + filter[i].jf];
                                t_offset = addrs[i + filter[i].jt];

                                /* same targets, can avoid doing the test :) */
                                if (filter[i].jt == filter[i].jf) {
                                        emit_jump(t_offset);
                                        emit_nop();
                                        break;
                                }

                                switch (code) {
                                case BPF_JMP | BPF_JGT | BPF_X:
                                case BPF_JMP | BPF_JGE | BPF_X:
                                case BPF_JMP | BPF_JEQ | BPF_X:
                                        seen |= SEEN_XREG;
                                        emit_cmp(r_A, r_X);
                                        break;
                                case BPF_JMP | BPF_JSET | BPF_X:
                                        seen |= SEEN_XREG;
                                        emit_btst(r_A, r_X);
                                        break;
                                case BPF_JMP | BPF_JEQ | BPF_K:
                                case BPF_JMP | BPF_JGT | BPF_K:
                                case BPF_JMP | BPF_JGE | BPF_K:
                                        if (is_simm13(K)) {
                                                emit_cmpi(r_A, K);
                                        } else {
                                                emit_loadimm(K, r_TMP);
                                                emit_cmp(r_A, r_TMP);
                                        }
                                        break;
                                case BPF_JMP | BPF_JSET | BPF_K:
                                        if (is_simm13(K)) {
                                                emit_btsti(r_A, K);
                                        } else {
                                                emit_loadimm(K, r_TMP);
                                                emit_btst(r_A, r_TMP);
                                        }
                                        break;
                                }
                                if (filter[i].jt != 0) {
                                        if (filter[i].jf)
                                                t_offset += 8;
                                        emit_branch(t_op, t_offset);
                                        emit_nop(); /* delay slot */
                                        if (filter[i].jf) {
                                                emit_jump(f_offset);
                                                emit_nop();
                                        }
                                        break;
                                }
                                emit_branch(f_op, f_offset);
                                emit_nop(); /* delay slot */
                                break;

                        default:
                                /* hmm, too complex filter, give up with jit compiler */
                                goto out;
                        }
                        ilen = (void *) prog - (void *) temp;
                        if (image) {
                                if (unlikely(proglen + ilen > oldproglen)) {
                                        pr_err("bpb_jit_compile fatal error\n");
                                        kfree(addrs);
                                        module_memfree(image);
                                        return;
                                }
                                memcpy(image + proglen, temp, ilen);
                        }
                        proglen += ilen;
                        addrs[i] = proglen;
                        prog = temp;
                }
                /* last bpf instruction is always a RET :
                 * use it to give the cleanup instruction(s) addr
                 */
                cleanup_addr = proglen - 8; /* jmpl; mov r_A,%o0; */
                if (seen_or_pass0 & SEEN_MEM)
                        cleanup_addr -= 4; /* add %sp, X, %sp; */

                if (image) {
                        if (proglen != oldproglen)
                                pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n",
                                       proglen, oldproglen);
                        break;
                }
                if (proglen == oldproglen) {
                        image = module_alloc(proglen);
                        if (!image)
                                goto out;
                }
                oldproglen = proglen;
        }

        if (bpf_jit_enable > 1)
                bpf_jit_dump(flen, proglen, pass + 1, image);

        if (image) {
                fp->bpf_func = (void *)image;
                fp->jited = 1;
        }
out:
        kfree(addrs);
        return;
}

void bpf_jit_free(struct bpf_prog *fp)
{
        if (fp->jited)
                module_memfree(fp->bpf_func);

        bpf_prog_unlock_free(fp);
}