linux/drivers/block/paride/kbic.c
<<
>>
Prefs
   1/*
   2        kbic.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
   3                              Under the terms of the GNU General Public License.
   4
   5        This is a low-level driver for the KBIC-951A and KBIC-971A
   6        parallel to IDE adapter chips from KingByte Information Systems.
   7
   8        The chips are almost identical, however, the wakeup code 
   9        required for the 971A interferes with the correct operation of
  10        the 951A, so this driver registers itself twice, once for
  11        each chip.
  12
  13*/
  14
  15/* Changes:
  16
  17        1.01    GRG 1998.05.06 init_proto, release_proto
  18
  19*/
  20
  21#define KBIC_VERSION      "1.01"
  22
  23#include <linux/module.h>
  24#include <linux/init.h>
  25#include <linux/delay.h>
  26#include <linux/kernel.h>
  27#include <linux/types.h>
  28#include <linux/wait.h>
  29#include <asm/io.h>
  30
  31#include "paride.h"
  32
  33#define r12w()                  (delay_p,inw(pi->port+1)&0xffff) 
  34
  35#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
  36#define j53(w)                  (((w>>3)&0x1f)|((w>>4)&0xe0))
  37
  38
  39/* cont = 0 - access the IDE register file 
  40   cont = 1 - access the IDE command set 
  41*/
  42
  43static int  cont_map[2] = { 0x80, 0x40 };
  44
  45static int kbic_read_regr( PIA *pi, int cont, int regr )
  46
  47{       int     a, b, s;
  48
  49        s = cont_map[cont];
  50
  51        switch (pi->mode) {
  52
  53        case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
  54                a = r1(); w0(0x28); b = r1(); w2(4);
  55                return j44(a,b);
  56
  57        case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
  58                a = r12w(); w2(4);
  59                return j53(a);
  60
  61        case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
  62                a = r0(); w2(4);
  63                return a;
  64
  65        case 3:
  66        case 4:
  67        case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
  68                a = r4(); b = r4(); w2(4); w2(0); w2(4);
  69                return a;
  70
  71        }
  72        return -1;
  73}       
  74
  75static void  kbic_write_regr( PIA *pi, int cont, int regr, int val)
  76
  77{       int  s;
  78
  79        s = cont_map[cont];
  80
  81        switch (pi->mode) {
  82
  83        case 0: 
  84        case 1:
  85        case 2: w0(regr|0x10|s); w2(4); w2(6); w2(4); 
  86                w0(val); w2(5); w2(4);
  87                break;
  88
  89        case 3:
  90        case 4:
  91        case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
  92                w4(val); w4(val);
  93                w2(4); w2(0); w2(4);
  94                break;
  95
  96        }
  97}
  98
  99static void k951_connect ( PIA *pi  )
 100
 101{       pi->saved_r0 = r0();
 102        pi->saved_r2 = r2();
 103        w2(4); 
 104}
 105
 106static void k951_disconnect ( PIA *pi )
 107
 108{       w0(pi->saved_r0);
 109        w2(pi->saved_r2);
 110}
 111
 112#define CCP(x)  w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
 113                w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
 114
 115static void k971_connect ( PIA *pi  )
 116
 117{       pi->saved_r0 = r0();
 118        pi->saved_r2 = r2();
 119        CCP(0x20);
 120        w2(4); 
 121}
 122
 123static void k971_disconnect ( PIA *pi )
 124
 125{       CCP(0x30);
 126        w0(pi->saved_r0);
 127        w2(pi->saved_r2);
 128}
 129
 130/* counts must be congruent to 0 MOD 4, but all known applications
 131   have this property.
 132*/
 133
 134static void kbic_read_block( PIA *pi, char * buf, int count )
 135
 136{       int     k, a, b;
 137
 138        switch (pi->mode) {
 139
 140        case 0: w0(0x98); w2(4); w2(6); w2(4);
 141                for (k=0;k<count/2;k++) {
 142                        w2(1); w0(8);    a = r1();
 143                               w0(0x28); b = r1();
 144                        buf[2*k]   = j44(a,b);
 145                        w2(5);           b = r1();
 146                               w0(8);    a = r1();
 147                        buf[2*k+1] = j44(a,b);
 148                        w2(4);
 149                } 
 150                break;
 151
 152        case 1: w0(0xb8); w2(4); w2(6); w2(4); 
 153                for (k=0;k<count/4;k++) {
 154                        w0(0xb8); 
 155                        w2(4); w2(5); 
 156                        w0(8);    buf[4*k]   = j53(r12w());
 157                        w0(0xb8); buf[4*k+1] = j53(r12w());
 158                        w2(4); w2(5);
 159                                  buf[4*k+3] = j53(r12w());
 160                        w0(8);    buf[4*k+2] = j53(r12w());
 161                }
 162                w2(4);
 163                break;
 164
 165        case 2: w0(0x88); w2(4); w2(6); w2(4);
 166                for (k=0;k<count/2;k++) {
 167                        w2(0xa0); w2(0xa1); buf[2*k] = r0();
 168                        w2(0xa5); buf[2*k+1] = r0();
 169                }
 170                w2(4);
 171                break;
 172
 173        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 174                for (k=0;k<count;k++) buf[k] = r4();
 175                w2(4); w2(0); w2(4);
 176                break;
 177
 178        case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 179                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
 180                w2(4); w2(0); w2(4);
 181                break;
 182
 183        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 184                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
 185                w2(4); w2(0); w2(4);
 186                break;
 187
 188
 189        }
 190}
 191
 192static void kbic_write_block( PIA *pi, char * buf, int count )
 193
 194{       int     k;
 195
 196        switch (pi->mode) {
 197
 198        case 0:
 199        case 1:
 200        case 2: w0(0x90); w2(4); w2(6); w2(4); 
 201                for(k=0;k<count/2;k++) {
 202                        w0(buf[2*k+1]); w2(0); w2(4); 
 203                        w0(buf[2*k]);   w2(5); w2(4); 
 204                }
 205                break;
 206
 207        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 208                for(k=0;k<count/2;k++) {
 209                        w4(buf[2*k+1]); 
 210                        w4(buf[2*k]);
 211                }
 212                w2(4); w2(0); w2(4);
 213                break;
 214
 215        case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 216                for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
 217                w2(4); w2(0); w2(4);
 218                break;
 219
 220        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 221                for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
 222                w2(4); w2(0); w2(4);
 223                break;
 224
 225        }
 226
 227}
 228
 229static void kbic_log_adapter( PIA *pi, char * scratch, 
 230                              int verbose, char * chip )
 231
 232{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
 233                                   "EPP-8","EPP_16","EPP-32"};
 234
 235        printk("%s: kbic %s, KingByte %s at 0x%x, ",
 236                pi->device,KBIC_VERSION,chip,pi->port);
 237        printk("mode %d (%s), delay %d\n",pi->mode,
 238                mode_string[pi->mode],pi->delay);
 239
 240}
 241
 242static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
 243
 244{       kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
 245}
 246
 247static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
 248
 249{       kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
 250}
 251
 252static struct pi_protocol k951 = {
 253        .owner          = THIS_MODULE,
 254        .name           = "k951",
 255        .max_mode       = 6,
 256        .epp_first      = 3,
 257        .default_delay  = 1,
 258        .max_units      = 1,
 259        .write_regr     = kbic_write_regr,
 260        .read_regr      = kbic_read_regr,
 261        .write_block    = kbic_write_block,
 262        .read_block     = kbic_read_block,
 263        .connect        = k951_connect,
 264        .disconnect     = k951_disconnect,
 265        .log_adapter    = k951_log_adapter,
 266};
 267
 268static struct pi_protocol k971 = {
 269        .owner          = THIS_MODULE,
 270        .name           = "k971",
 271        .max_mode       = 6,
 272        .epp_first      = 3,
 273        .default_delay  = 1,
 274        .max_units      = 1,
 275        .write_regr     = kbic_write_regr,
 276        .read_regr      = kbic_read_regr,
 277        .write_block    = kbic_write_block,
 278        .read_block     = kbic_read_block,
 279        .connect        = k971_connect,
 280        .disconnect     = k971_disconnect,
 281        .log_adapter    = k971_log_adapter,
 282};
 283
 284static int __init kbic_init(void)
 285{
 286        int rv;
 287
 288        rv = paride_register(&k951);
 289        if (rv < 0)
 290                return rv;
 291        rv = paride_register(&k971);
 292        if (rv < 0)
 293                paride_unregister(&k951);
 294        return rv;
 295}
 296
 297static void __exit kbic_exit(void)
 298{
 299        paride_unregister(&k951);
 300        paride_unregister(&k971);
 301}
 302
 303MODULE_LICENSE("GPL");
 304module_init(kbic_init)
 305module_exit(kbic_exit)
 306