linux/drivers/char/applicom.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/* Derived from Applicom driver ac.c for SCO Unix                            */
   3/* Ported by David Woodhouse, Axiom (Cambridge) Ltd.                         */
   4/* dwmw2@infradead.org 30/8/98                                               */
   5/* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $                          */
   6/* This module is for Linux 2.1 and 2.2 series kernels.                      */
   7/*****************************************************************************/
   8/* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt  */
   9/* ceci pour reseter correctement apres une sortie sauvage                   */
  10/* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption,     */
  11/* LoopCount n'etait pas initialise a 0.                                     */
  12/* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte   */
  13/*           pour liberer le bus                                             */
  14/* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
  15/* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
  16/* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
  17/* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
  18/* addresses de base des cartes, IOCTL 6 plus complet                         */
  19/* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
  20/* de code autre que le texte V2.6.1 en V2.8.0                               */
  21/*****************************************************************************/
  22
  23
  24#include <linux/kernel.h>
  25#include <linux/module.h>
  26#include <linux/interrupt.h>
  27#include <linux/sched/signal.h>
  28#include <linux/slab.h>
  29#include <linux/errno.h>
  30#include <linux/mutex.h>
  31#include <linux/miscdevice.h>
  32#include <linux/pci.h>
  33#include <linux/wait.h>
  34#include <linux/init.h>
  35#include <linux/fs.h>
  36#include <linux/nospec.h>
  37
  38#include <asm/io.h>
  39#include <linux/uaccess.h>
  40
  41#include "applicom.h"
  42
  43
  44/* NOTE: We use for loops with {write,read}b() instead of 
  45   memcpy_{from,to}io throughout this driver. This is because
  46   the board doesn't correctly handle word accesses - only
  47   bytes. 
  48*/
  49
  50
  51#undef DEBUG
  52
  53#define MAX_BOARD 8             /* maximum of pc board possible */
  54#define MAX_ISA_BOARD 4
  55#define LEN_RAM_IO 0x800
  56
  57#ifndef PCI_VENDOR_ID_APPLICOM
  58#define PCI_VENDOR_ID_APPLICOM                0x1389
  59#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC     0x0001
  60#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
  61#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB     0x0003
  62#endif
  63
  64static DEFINE_MUTEX(ac_mutex);
  65static char *applicom_pci_devnames[] = {
  66        "PCI board",
  67        "PCI2000IBS / PCI2000CAN",
  68        "PCI2000PFB"
  69};
  70
  71static const struct pci_device_id applicom_pci_tbl[] = {
  72        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
  73        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
  74        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
  75        { 0 }
  76};
  77MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
  78
  79MODULE_AUTHOR("David Woodhouse & Applicom International");
  80MODULE_DESCRIPTION("Driver for Applicom Profibus card");
  81MODULE_LICENSE("GPL");
  82MODULE_ALIAS_MISCDEV(AC_MINOR);
  83
  84static struct applicom_board {
  85        unsigned long PhysIO;
  86        void __iomem *RamIO;
  87        wait_queue_head_t FlagSleepSend;
  88        long irq;
  89        spinlock_t mutex;
  90} apbs[MAX_BOARD];
  91
  92static unsigned int irq = 0;    /* interrupt number IRQ       */
  93static unsigned long mem = 0;   /* physical segment of board  */
  94
  95module_param_hw(irq, uint, irq, 0);
  96MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
  97module_param_hw(mem, ulong, iomem, 0);
  98MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
  99
 100static unsigned int numboards;  /* number of installed boards */
 101static volatile unsigned char Dummy;
 102static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
 103static unsigned int WriteErrorCount;    /* number of write error      */
 104static unsigned int ReadErrorCount;     /* number of read error       */
 105static unsigned int DeviceErrorCount;   /* number of device error     */
 106
 107static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
 108static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
 109static long ac_ioctl(struct file *, unsigned int, unsigned long);
 110static irqreturn_t ac_interrupt(int, void *);
 111
 112static const struct file_operations ac_fops = {
 113        .owner = THIS_MODULE,
 114        .llseek = no_llseek,
 115        .read = ac_read,
 116        .write = ac_write,
 117        .unlocked_ioctl = ac_ioctl,
 118};
 119
 120static struct miscdevice ac_miscdev = {
 121        AC_MINOR,
 122        "ac",
 123        &ac_fops
 124};
 125
 126static int dummy;       /* dev_id for request_irq() */
 127
 128static int ac_register_board(unsigned long physloc, void __iomem *loc, 
 129                      unsigned char boardno)
 130{
 131        volatile unsigned char byte_reset_it;
 132
 133        if((readb(loc + CONF_END_TEST)     != 0x00) ||
 134           (readb(loc + CONF_END_TEST + 1) != 0x55) ||
 135           (readb(loc + CONF_END_TEST + 2) != 0xAA) ||
 136           (readb(loc + CONF_END_TEST + 3) != 0xFF))
 137                return 0;
 138
 139        if (!boardno)
 140                boardno = readb(loc + NUMCARD_OWNER_TO_PC);
 141
 142        if (!boardno || boardno > MAX_BOARD) {
 143                printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
 144                       boardno, physloc, MAX_BOARD);
 145                return 0;
 146        }
 147
 148        if (apbs[boardno - 1].RamIO) {
 149                printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", 
 150                       boardno, physloc, boardno, apbs[boardno-1].PhysIO);
 151                return 0;
 152        }
 153
 154        boardno--;
 155
 156        apbs[boardno].PhysIO = physloc;
 157        apbs[boardno].RamIO = loc;
 158        init_waitqueue_head(&apbs[boardno].FlagSleepSend);
 159        spin_lock_init(&apbs[boardno].mutex);
 160        byte_reset_it = readb(loc + RAM_IT_TO_PC);
 161
 162        numboards++;
 163        return boardno + 1;
 164}
 165
 166static void __exit applicom_exit(void)
 167{
 168        unsigned int i;
 169
 170        misc_deregister(&ac_miscdev);
 171
 172        for (i = 0; i < MAX_BOARD; i++) {
 173
 174                if (!apbs[i].RamIO)
 175                        continue;
 176
 177                if (apbs[i].irq)
 178                        free_irq(apbs[i].irq, &dummy);
 179
 180                iounmap(apbs[i].RamIO);
 181        }
 182}
 183
 184static int __init applicom_init(void)
 185{
 186        int i, numisa = 0;
 187        struct pci_dev *dev = NULL;
 188        void __iomem *RamIO;
 189        int boardno, ret;
 190
 191        printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
 192
 193        /* No mem and irq given - check for a PCI card */
 194
 195        while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
 196
 197                if (!pci_match_id(applicom_pci_tbl, dev))
 198                        continue;
 199                
 200                if (pci_enable_device(dev))
 201                        return -EIO;
 202
 203                RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
 204
 205                if (!RamIO) {
 206                        printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
 207                                "space at 0x%llx\n",
 208                                (unsigned long long)pci_resource_start(dev, 0));
 209                        pci_disable_device(dev);
 210                        return -EIO;
 211                }
 212
 213                printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
 214                       applicom_pci_devnames[dev->device-1],
 215                           (unsigned long long)pci_resource_start(dev, 0),
 216                       dev->irq);
 217
 218                boardno = ac_register_board(pci_resource_start(dev, 0),
 219                                RamIO, 0);
 220                if (!boardno) {
 221                        printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
 222                        iounmap(RamIO);
 223                        pci_disable_device(dev);
 224                        continue;
 225                }
 226
 227                if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
 228                        printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
 229                        iounmap(RamIO);
 230                        pci_disable_device(dev);
 231                        apbs[boardno - 1].RamIO = NULL;
 232                        continue;
 233                }
 234
 235                /* Enable interrupts. */
 236
 237                writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
 238
 239                apbs[boardno - 1].irq = dev->irq;
 240        }
 241
 242        /* Finished with PCI cards. If none registered, 
 243         * and there was no mem/irq specified, exit */
 244
 245        if (!mem || !irq) {
 246                if (numboards)
 247                        goto fin;
 248                else {
 249                        printk(KERN_INFO "ac.o: No PCI boards found.\n");
 250                        printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
 251                        return -ENXIO;
 252                }
 253        }
 254
 255        /* Now try the specified ISA cards */
 256
 257        for (i = 0; i < MAX_ISA_BOARD; i++) {
 258                RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
 259
 260                if (!RamIO) {
 261                        printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
 262                        continue;
 263                }
 264
 265                if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
 266                                                  RamIO,i+1))) {
 267                        iounmap(RamIO);
 268                        continue;
 269                }
 270
 271                printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
 272
 273                if (!numisa) {
 274                        if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
 275                                printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
 276                                iounmap(RamIO);
 277                                apbs[boardno - 1].RamIO = NULL;
 278                        }
 279                        else
 280                                apbs[boardno - 1].irq = irq;
 281                }
 282                else
 283                        apbs[boardno - 1].irq = 0;
 284
 285                numisa++;
 286        }
 287
 288        if (!numisa)
 289                printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
 290                                "at mem 0x%lx\n", mem);
 291
 292 fin:
 293        init_waitqueue_head(&FlagSleepRec);
 294
 295        WriteErrorCount = 0;
 296        ReadErrorCount = 0;
 297        DeviceErrorCount = 0;
 298
 299        if (numboards) {
 300                ret = misc_register(&ac_miscdev);
 301                if (ret) {
 302                        printk(KERN_WARNING "ac.o: Unable to register misc device\n");
 303                        goto out;
 304                }
 305                for (i = 0; i < MAX_BOARD; i++) {
 306                        int serial;
 307                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 308
 309                        if (!apbs[i].RamIO)
 310                                continue;
 311
 312                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 313                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 314
 315                        boardname[serial] = 0;
 316
 317
 318                        printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
 319                               i+1, boardname,
 320                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 321                               (int)(readb(apbs[i].RamIO + VERS) & 0xF));
 322                        
 323                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 324                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 325                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 326
 327                        if (serial != 0)
 328                                printk(" S/N %d\n", serial);
 329                        else
 330                                printk("\n");
 331                }
 332                return 0;
 333        }
 334
 335        else
 336                return -ENXIO;
 337
 338out:
 339        for (i = 0; i < MAX_BOARD; i++) {
 340                if (!apbs[i].RamIO)
 341                        continue;
 342                if (apbs[i].irq)
 343                        free_irq(apbs[i].irq, &dummy);
 344                iounmap(apbs[i].RamIO);
 345        }
 346        return ret;
 347}
 348
 349module_init(applicom_init);
 350module_exit(applicom_exit);
 351
 352
 353static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
 354{
 355        unsigned int NumCard;   /* Board number 1 -> 8           */
 356        unsigned int IndexCard; /* Index board number 0 -> 7     */
 357        unsigned char TicCard;  /* Board TIC to send             */
 358        unsigned long flags;    /* Current priority              */
 359        struct st_ram_io st_loc;
 360        struct mailbox tmpmailbox;
 361#ifdef DEBUG
 362        int c;
 363#endif
 364        DECLARE_WAITQUEUE(wait, current);
 365
 366        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 367                static int warncount = 5;
 368                if (warncount) {
 369                        printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
 370                               count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
 371                        warncount--;
 372                }
 373                return -EINVAL;
 374        }
 375
 376        if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io))) 
 377                return -EFAULT;
 378        
 379        if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
 380                          sizeof(struct mailbox))) 
 381                return -EFAULT;
 382
 383        NumCard = st_loc.num_card;      /* board number to send          */
 384        TicCard = st_loc.tic_des_from_pc;       /* tic number to send            */
 385        IndexCard = NumCard - 1;
 386
 387        if (IndexCard >= MAX_BOARD)
 388                return -EINVAL;
 389        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 390
 391        if (!apbs[IndexCard].RamIO)
 392                return -EINVAL;
 393
 394#ifdef DEBUG
 395        printk("Write to applicom card #%d. struct st_ram_io follows:",
 396               IndexCard+1);
 397
 398                for (c = 0; c < sizeof(struct st_ram_io);) {
 399                
 400                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
 401
 402                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 403                                printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
 404                        }
 405                }
 406
 407                printk("\nstruct mailbox follows:");
 408
 409                for (c = 0; c < sizeof(struct mailbox);) {
 410                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
 411
 412                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 413                                printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
 414                        }
 415                }
 416
 417                printk("\n");
 418#endif
 419
 420        spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 421
 422        /* Test octet ready correct */
 423        if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) { 
 424                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 425                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 426                printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
 427                       IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
 428                DeviceErrorCount++;
 429                return -EIO;
 430        }
 431        
 432        /* Place ourselves on the wait queue */
 433        set_current_state(TASK_INTERRUPTIBLE);
 434        add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 435
 436        /* Check whether the card is ready for us */
 437        while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
 438                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 439                /* It's busy. Sleep. */
 440
 441                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 442                schedule();
 443                if (signal_pending(current)) {
 444                        remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
 445                                          &wait);
 446                        return -EINTR;
 447                }
 448                spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 449                set_current_state(TASK_INTERRUPTIBLE);
 450        }
 451
 452        /* We may not have actually slept */
 453        set_current_state(TASK_RUNNING);
 454        remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 455
 456        writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 457
 458        /* Which is best - lock down the pages with rawio and then
 459           copy directly, or use bounce buffers? For now we do the latter 
 460           because it works with 2.2 still */
 461        {
 462                unsigned char *from = (unsigned char *) &tmpmailbox;
 463                void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
 464                int c;
 465
 466                for (c = 0; c < sizeof(struct mailbox); c++)
 467                        writeb(*(from++), to++);
 468        }
 469
 470        writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
 471        writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
 472        writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
 473        writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 474        writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 475        writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 476        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 477        spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 478        return 0;
 479}
 480
 481static int do_ac_read(int IndexCard, char __user *buf,
 482                struct st_ram_io *st_loc, struct mailbox *mailbox)
 483{
 484        void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
 485        unsigned char *to = (unsigned char *)mailbox;
 486#ifdef DEBUG
 487        int c;
 488#endif
 489
 490        st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
 491        st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 492
 493
 494        {
 495                int c;
 496
 497                for (c = 0; c < sizeof(struct mailbox); c++)
 498                        *(to++) = readb(from++);
 499        }
 500        writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 501        writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
 502        writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 503        writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC), 
 504               apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
 505        writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 506        writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
 507        writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 508        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 509
 510#ifdef DEBUG
 511                printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
 512
 513                for (c = 0; c < sizeof(struct st_ram_io);) {
 514                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
 515
 516                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 517                                printk(" %2.2X", ((unsigned char *)st_loc)[c]);
 518                        }
 519                }
 520
 521                printk("\nstruct mailbox follows:");
 522
 523                for (c = 0; c < sizeof(struct mailbox);) {
 524                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
 525
 526                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 527                                printk(" %2.2X", ((unsigned char *)mailbox)[c]);
 528                        }
 529                }
 530                printk("\n");
 531#endif
 532        return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
 533}
 534
 535static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
 536{
 537        unsigned long flags;
 538        unsigned int i;
 539        unsigned char tmp;
 540        int ret = 0;
 541        DECLARE_WAITQUEUE(wait, current);
 542#ifdef DEBUG
 543        int loopcount=0;
 544#endif
 545        /* No need to ratelimit this. Only root can trigger it anyway */
 546        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 547                printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
 548                        count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
 549                return -EINVAL;
 550        }
 551        
 552        while(1) {
 553                /* Stick ourself on the wait queue */
 554                set_current_state(TASK_INTERRUPTIBLE);
 555                add_wait_queue(&FlagSleepRec, &wait);
 556                
 557                /* Scan each board, looking for one which has a packet for us */
 558                for (i=0; i < MAX_BOARD; i++) {
 559                        if (!apbs[i].RamIO)
 560                                continue;
 561                        spin_lock_irqsave(&apbs[i].mutex, flags);
 562                        
 563                        tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
 564                        
 565                        if (tmp == 2) {
 566                                struct st_ram_io st_loc;
 567                                struct mailbox mailbox;
 568
 569                                /* Got a packet for us */
 570                                memset(&st_loc, 0, sizeof(st_loc));
 571                                ret = do_ac_read(i, buf, &st_loc, &mailbox);
 572                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 573                                set_current_state(TASK_RUNNING);
 574                                remove_wait_queue(&FlagSleepRec, &wait);
 575
 576                                if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
 577                                        return -EFAULT;
 578                                if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
 579                                        return -EFAULT;
 580                                return tmp;
 581                        }
 582                        
 583                        if (tmp > 2) {
 584                                /* Got an error */
 585                                Dummy = readb(apbs[i].RamIO + VERS);
 586                                
 587                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 588                                set_current_state(TASK_RUNNING);
 589                                remove_wait_queue(&FlagSleepRec, &wait);
 590                                
 591                                printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
 592                                       i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 593                                DeviceErrorCount++;
 594                                return -EIO;
 595                        }
 596                        
 597                        /* Nothing for us. Try the next board */
 598                        Dummy = readb(apbs[i].RamIO + VERS);
 599                        spin_unlock_irqrestore(&apbs[i].mutex, flags);
 600                        
 601                } /* per board */
 602
 603                /* OK - No boards had data for us. Sleep now */
 604
 605                schedule();
 606                remove_wait_queue(&FlagSleepRec, &wait);
 607
 608                if (signal_pending(current))
 609                        return -EINTR;
 610
 611#ifdef DEBUG
 612                if (loopcount++ > 2) {
 613                        printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
 614                }
 615#endif
 616        } 
 617}
 618
 619static irqreturn_t ac_interrupt(int vec, void *dev_instance)
 620{
 621        unsigned int i;
 622        unsigned int FlagInt;
 623        unsigned int LoopCount;
 624        int handled = 0;
 625
 626        //    printk("Applicom interrupt on IRQ %d occurred\n", vec);
 627
 628        LoopCount = 0;
 629
 630        do {
 631                FlagInt = 0;
 632                for (i = 0; i < MAX_BOARD; i++) {
 633                        
 634                        /* Skip if this board doesn't exist */
 635                        if (!apbs[i].RamIO)
 636                                continue;
 637
 638                        spin_lock(&apbs[i].mutex);
 639
 640                        /* Skip if this board doesn't want attention */
 641                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
 642                                spin_unlock(&apbs[i].mutex);
 643                                continue;
 644                        }
 645
 646                        handled = 1;
 647                        FlagInt = 1;
 648                        writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
 649
 650                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
 651                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
 652                                       i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 653                                DeviceErrorCount++;
 654                        }
 655
 656                        if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) && 
 657                           (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
 658                                
 659                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
 660                                       i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
 661                                DeviceErrorCount++;
 662                        }
 663
 664                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) {     /* mailbox sent by the card ?   */
 665                                if (waitqueue_active(&FlagSleepRec)) {
 666                                wake_up_interruptible(&FlagSleepRec);
 667                        }
 668                        }
 669
 670                        if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) {   /* ram i/o free for write by pc ? */
 671                                if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ?    */
 672                                        wake_up_interruptible(&apbs[i].FlagSleepSend);
 673                                }
 674                        }
 675                        Dummy = readb(apbs[i].RamIO + VERS);
 676
 677                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
 678                                /* There's another int waiting on this card */
 679                                spin_unlock(&apbs[i].mutex);
 680                                i--;
 681                        } else {
 682                                spin_unlock(&apbs[i].mutex);
 683                        }
 684                }
 685                if (FlagInt)
 686                        LoopCount = 0;
 687                else
 688                        LoopCount++;
 689        } while(LoopCount < 2);
 690        return IRQ_RETVAL(handled);
 691}
 692
 693
 694
 695static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 696     
 697{                               /* @ ADG ou ATO selon le cas */
 698        int i;
 699        unsigned char IndexCard;
 700        void __iomem *pmem;
 701        int ret = 0;
 702        static int warncount = 10;
 703        volatile unsigned char byte_reset_it;
 704        struct st_ram_io *adgl;
 705        void __user *argp = (void __user *)arg;
 706
 707        /* In general, the device is only openable by root anyway, so we're not
 708           particularly concerned that bogus ioctls can flood the console. */
 709
 710        adgl = memdup_user(argp, sizeof(struct st_ram_io));
 711        if (IS_ERR(adgl))
 712                return PTR_ERR(adgl);
 713
 714        mutex_lock(&ac_mutex);  
 715        IndexCard = adgl->num_card-1;
 716         
 717        if (cmd != 6 && IndexCard >= MAX_BOARD)
 718                goto err;
 719        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 720
 721        if (cmd != 6 && !apbs[IndexCard].RamIO)
 722                goto err;
 723
 724        switch (cmd) {
 725                
 726        case 0:
 727                pmem = apbs[IndexCard].RamIO;
 728                for (i = 0; i < sizeof(struct st_ram_io); i++)
 729                        ((unsigned char *)adgl)[i]=readb(pmem++);
 730                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 731                        ret = -EFAULT;
 732                break;
 733        case 1:
 734                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 735                for (i = 0; i < 4; i++)
 736                        adgl->conf_end_test[i] = readb(pmem++);
 737                for (i = 0; i < 2; i++)
 738                        adgl->error_code[i] = readb(pmem++);
 739                for (i = 0; i < 4; i++)
 740                        adgl->parameter_error[i] = readb(pmem++);
 741                pmem = apbs[IndexCard].RamIO + VERS;
 742                adgl->vers = readb(pmem);
 743                pmem = apbs[IndexCard].RamIO + TYPE_CARD;
 744                for (i = 0; i < 20; i++)
 745                        adgl->reserv1[i] = readb(pmem++);
 746                *(int *)&adgl->reserv1[20] =  
 747                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) + 
 748                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) + 
 749                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
 750
 751                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 752                        ret = -EFAULT;
 753                break;
 754        case 2:
 755                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 756                for (i = 0; i < 10; i++)
 757                        writeb(0xff, pmem++);
 758                writeb(adgl->data_from_pc_ready, 
 759                       apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 760
 761                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 762                
 763                for (i = 0; i < MAX_BOARD; i++) {
 764                        if (apbs[i].RamIO) {
 765                                byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
 766                        }
 767                }
 768                break;
 769        case 3:
 770                pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
 771                writeb(adgl->tic_des_from_pc, pmem);
 772                break;
 773        case 4:
 774                pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
 775                adgl->tic_owner_to_pc     = readb(pmem++);
 776                adgl->numcard_owner_to_pc = readb(pmem);
 777                if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
 778                        ret = -EFAULT;
 779                break;
 780        case 5:
 781                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 782                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 783                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 784                writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 785                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 786                break;
 787        case 6:
 788                printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
 789                printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
 790                printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
 791                printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
 792                for (i = 0; i < MAX_BOARD; i++) {
 793                        int serial;
 794                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 795
 796                        if (!apbs[i].RamIO)
 797                                continue;
 798
 799                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 800                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 801                        boardname[serial] = 0;
 802
 803                        printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
 804                               i+1,
 805                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 806                               (int)(readb(apbs[i].RamIO + VERS) & 0xF),
 807                               boardname);
 808
 809
 810                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 811                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 812                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 813
 814                        if (serial != 0)
 815                                printk(" S/N %d\n", serial);
 816                        else
 817                                printk("\n");
 818                }
 819                if (DeviceErrorCount != 0)
 820                        printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
 821                if (ReadErrorCount != 0)
 822                        printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
 823                if (WriteErrorCount != 0)
 824                        printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
 825                if (waitqueue_active(&FlagSleepRec))
 826                        printk(KERN_INFO "Process in read pending\n");
 827                for (i = 0; i < MAX_BOARD; i++) {
 828                        if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
 829                                printk(KERN_INFO "Process in write pending board %d\n",i+1);
 830                }
 831                break;
 832        default:
 833                ret = -ENOTTY;
 834                break;
 835        }
 836        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 837        kfree(adgl);
 838        mutex_unlock(&ac_mutex);
 839        return ret;
 840
 841err:
 842        if (warncount) {
 843                pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
 844                        (int)IndexCard + 1);
 845                warncount--;
 846        }
 847        kfree(adgl);
 848        mutex_unlock(&ac_mutex);
 849        return -EINVAL;
 850
 851}
 852
 853