// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation
 * Copyright (C) 2009, 2010, 2011 Red Hat, Inc.
 * Copyright (C) 2009, 2010, 2011 Amit Shah <amit.shah@redhat.com>
 */
#include <linux/cdev.h>
#include <linux/debugfs.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/splice.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/virtio.h>
#include <linux/virtio_console.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include "../tty/hvc/hvc_console.h"

#define is_rproc_enabled IS_ENABLED(CONFIG_REMOTEPROC)

/*
 * This is a global struct for storing common data for all the devices
 * this driver handles.
 *
 * Mainly, it has a linked list for all the consoles in one place so
 * that callbacks from hvc for get_chars(), put_chars() work properly
 * across multiple devices and multiple ports per device.
 */
struct ports_driver_data {
        /* Used for registering chardevs */
        struct class *class;

        /* Used for exporting per-port information to debugfs */
        struct dentry *debugfs_dir;

        /* List of all the devices we're handling */
        struct list_head portdevs;

        /*
         * This is used to keep track of the number of hvc consoles
         * spawned by this driver.  This number is given as the first
         * argument to hvc_alloc().  To correctly map an initial
         * console spawned via hvc_instantiate to the console being
         * hooked up via hvc_alloc, we need to pass the same vtermno.
         *
         * We also just assume the first console being initialised was
         * the first one that got used as the initial console.
         */
        unsigned int next_vtermno;

        /* All the console devices handled by this driver */
        struct list_head consoles;
};
static struct ports_driver_data pdrvdata = { .next_vtermno = 1};

static DEFINE_SPINLOCK(pdrvdata_lock);
static DECLARE_COMPLETION(early_console_added);

/* This struct holds information that's relevant only for console ports */
struct console {
        /* We'll place all consoles in a list in the pdrvdata struct */
        struct list_head list;

        /* The hvc device associated with this console port */
        struct hvc_struct *hvc;

        /* The size of the console */
        struct winsize ws;

        /*
         * This number identifies the number that we used to register
         * with hvc in hvc_instantiate() and hvc_alloc(); this is the
         * number passed on by the hvc callbacks to us to
         * differentiate between the other console ports handled by
         * this driver
         */
        u32 vtermno;
};

struct port_buffer {
        char *buf;

        /* size of the buffer in *buf above */
        size_t size;

        /* used length of the buffer */
        size_t len;
        /* offset in the buf from which to consume data */
        size_t offset;

        /* DMA address of buffer */
        dma_addr_t dma;

        /* Device we got DMA memory from */
        struct device *dev;

        /* List of pending dma buffers to free */
        struct list_head list;

        /* If sgpages == 0 then buf is used */
        unsigned int sgpages;

        /* sg is used if spages > 0. sg must be the last in is struct */
        struct scatterlist sg[];
};

/*
 * This is a per-device struct that stores data common to all the
 * ports for that device (vdev->priv).
 */
struct ports_device {
        /* Next portdev in the list, head is in the pdrvdata struct */
        struct list_head list;

        /*
         * Workqueue handlers where we process deferred work after
         * notification
         */
        struct work_struct control_work;
        struct work_struct config_work;

        struct list_head ports;

        /* To protect the list of ports */
        spinlock_t ports_lock;

        /* To protect the vq operations for the control channel */
        spinlock_t c_ivq_lock;
        spinlock_t c_ovq_lock;

        /* max. number of ports this device can hold */
        u32 max_nr_ports;

        /* The virtio device we're associated with */
        struct virtio_device *vdev;

        /*
         * A couple of virtqueues for the control channel: one for
         * guest->host transfers, one for host->guest transfers
         */
        struct virtqueue *c_ivq, *c_ovq;

        /*
         * A control packet buffer for guest->host requests, protected
         * by c_ovq_lock.
         */
        struct virtio_console_control cpkt;

        /* Array of per-port IO virtqueues */
        struct virtqueue **in_vqs, **out_vqs;

        /* Major number for this device.  Ports will be created as minors. */
        int chr_major;
};

struct port_stats {
        unsigned long bytes_sent, bytes_received, bytes_discarded;
};

/* This struct holds the per-port data */
struct port {
        /* Next port in the list, head is in the ports_device */
        struct list_head list;

        /* Pointer to the parent virtio_console device */
        struct ports_device *portdev;

        /* The current buffer from which data has to be fed to readers */
        struct port_buffer *inbuf;

        /*
         * To protect the operations on the in_vq associated with this
         * port.  Has to be a spinlock because it can be called from
         * interrupt context (get_char()).
         */
        spinlock_t inbuf_lock;

        /* Protect the operations on the out_vq. */
        spinlock_t outvq_lock;

        /* The IO vqs for this port */
        struct virtqueue *in_vq, *out_vq;

        /* File in the debugfs directory that exposes this port's information */
        struct dentry *debugfs_file;

        /*
         * Keep count of the bytes sent, received and discarded for
         * this port for accounting and debugging purposes.  These
         * counts are not reset across port open / close events.
         */
        struct port_stats stats;

        /*
         * The entries in this struct will be valid if this port is
         * hooked up to an hvc console
         */
        struct console cons;

        /* Each port associates with a separate char device */
        struct cdev *cdev;
        struct device *dev;

        /* Reference-counting to handle port hot-unplugs and file operations */
        struct kref kref;

        /* A waitqueue for poll() or blocking read operations */
        wait_queue_head_t waitqueue;

        /* The 'name' of the port that we expose via sysfs properties */
        char *name;

        /* We can notify apps of host connect / disconnect events via SIGIO */
        struct fasync_struct *async_queue;

        /* The 'id' to identify the port with the Host */
        u32 id;

        bool outvq_full;

        /* Is the host device open */
        bool host_connected;

        /* We should allow only one process to open a port */
        bool guest_connected;
};

/* This is the very early arch-specified put chars function. */
static int (*early_put_chars)(u32, const char *, int);

static struct port *find_port_by_vtermno(u32 vtermno)
{
        struct port *port;
        struct console *cons;
        unsigned long flags;

        spin_lock_irqsave(&pdrvdata_lock, flags);
        list_for_each_entry(cons, &pdrvdata.consoles, list) {
                if (cons->vtermno == vtermno) {
                        port = container_of(cons, struct port, cons);
                        goto out;
                }
        }
        port = NULL;
out:
        spin_unlock_irqrestore(&pdrvdata_lock, flags);
        return port;
}

static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev,
                                                 dev_t dev)
{
        struct port *port;
        unsigned long flags;

        spin_lock_irqsave(&portdev->ports_lock, flags);
        list_for_each_entry(port, &portdev->ports, list) {
                if (port->cdev->dev == dev) {
                        kref_get(&port->kref);
                        goto out;
                }
        }
        port = NULL;
out:
        spin_unlock_irqrestore(&portdev->ports_lock, flags);

        return port;
}

static struct port *find_port_by_devt(dev_t dev)
{
        struct ports_device *portdev;
        struct port *port;
        unsigned long flags;

        spin_lock_irqsave(&pdrvdata_lock, flags);
        list_for_each_entry(portdev, &pdrvdata.portdevs, list) {
                port = find_port_by_devt_in_portdev(portdev, dev);
                if (port)
                        goto out;
        }
        port = NULL;
out:
        spin_unlock_irqrestore(&pdrvdata_lock, flags);
        return port;
}

static struct port *find_port_by_id(struct ports_device *portdev, u32 id)
{
        struct port *port;
        unsigned long flags;

        spin_lock_irqsave(&portdev->ports_lock, flags);
        list_for_each_entry(port, &portdev->ports, list)
                if (port->id == id)
                        goto out;
        port = NULL;
out:
        spin_unlock_irqrestore(&portdev->ports_lock, flags);

        return port;
}

static struct port *find_port_by_vq(struct ports_device *portdev,
                                    struct virtqueue *vq)
{
        struct port *port;
        unsigned long flags;

        spin_lock_irqsave(&portdev->ports_lock, flags);
        list_for_each_entry(port, &portdev->ports, list)
                if (port->in_vq == vq || port->out_vq == vq)
                        goto out;
        port = NULL;
out:
        spin_unlock_irqrestore(&portdev->ports_lock, flags);
        return port;
}

static bool is_console_port(struct port *port)
{
        if (port->cons.hvc)
                return true;
        return false;
}

static bool is_rproc_serial(const struct virtio_device *vdev)
{
        return is_rproc_enabled && vdev->id.device == VIRTIO_ID_RPROC_SERIAL;
}

static inline bool use_multiport(struct ports_device *portdev)
{
        /*
         * This condition can be true when put_chars is called from
         * early_init
         */
        if (!portdev->vdev)
                return false;
        return __virtio_test_bit(portdev->vdev, VIRTIO_CONSOLE_F_MULTIPORT);
}

static DEFINE_SPINLOCK(dma_bufs_lock);
static LIST_HEAD(pending_free_dma_bufs);

static void free_buf(struct port_buffer *buf, bool can_sleep)
{
        unsigned int i;

        for (i = 0; i < buf->sgpages; i++) {
                struct page *page = sg_page(&buf->sg[i]);
                if (!page)
                        break;
                put_page(page);
        }

        if (!buf->dev) {
                kfree(buf->buf);
        } else if (is_rproc_enabled) {
                unsigned long flags;

                /* dma_free_coherent requires interrupts to be enabled. */
                if (!can_sleep) {
                        /* queue up dma-buffers to be freed later */
                        spin_lock_irqsave(&dma_bufs_lock, flags);
                        list_add_tail(&buf->list, &pending_free_dma_bufs);
                        spin_unlock_irqrestore(&dma_bufs_lock, flags);
                        return;
                }
                dma_free_coherent(buf->dev, buf->size, buf->buf, buf->dma);

                /* Release device refcnt and allow it to be freed */
                put_device(buf->dev);
        }

        kfree(buf);
}

static void reclaim_dma_bufs(void)
{
        unsigned long flags;
        struct port_buffer *buf, *tmp;
        LIST_HEAD(tmp_list);

        if (list_empty(&pending_free_dma_bufs))
                return;

        /* Create a copy of the pending_free_dma_bufs while holding the lock */
        spin_lock_irqsave(&dma_bufs_lock, flags);
        list_cut_position(&tmp_list, &pending_free_dma_bufs,
                          pending_free_dma_bufs.prev);
        spin_unlock_irqrestore(&dma_bufs_lock, flags);

        /* Release the dma buffers, without irqs enabled */
        list_for_each_entry_safe(buf, tmp, &tmp_list, list) {
                list_del(&buf->list);
                free_buf(buf, true);
        }
}

static struct port_buffer *alloc_buf(struct virtio_device *vdev, size_t buf_size,
                                     int pages)
{
        struct port_buffer *buf;

        reclaim_dma_bufs();

        /*
         * Allocate buffer and the sg list. The sg list array is allocated
         * directly after the port_buffer struct.
         */
        buf = kmalloc(struct_size(buf, sg, pages), GFP_KERNEL);
        if (!buf)
                goto fail;

        buf->sgpages = pages;
        if (pages > 0) {
                buf->dev = NULL;
                buf->buf = NULL;
                return buf;
        }

        if (is_rproc_serial(vdev)) {
                /*
                 * Allocate DMA memory from ancestor. When a virtio
                 * device is created by remoteproc, the DMA memory is
                 * associated with the parent device:
                 * virtioY => remoteprocX#vdevYbuffer.
                 */
                buf->dev = vdev->dev.parent;
                if (!buf->dev)
                        goto free_buf;

                /* Increase device refcnt to avoid freeing it */
                get_device(buf->dev);
                buf->buf = dma_alloc_coherent(buf->dev, buf_size, &buf->dma,
                                              GFP_KERNEL);
        } else {
                buf->dev = NULL;
                buf->buf = kmalloc(buf_size, GFP_KERNEL);
        }

        if (!buf->buf)
                goto free_buf;
        buf->len = 0;
        buf->offset = 0;
        buf->size = buf_size;
        return buf;

free_buf:
        kfree(buf);
fail:
        return NULL;
}

/* Callers should take appropriate locks */
static struct port_buffer *get_inbuf(struct port *port)
{
        struct port_buffer *buf;
        unsigned int len;

        if (port->inbuf)
                return port->inbuf;

        buf = virtqueue_get_buf(port->in_vq, &len);
        if (buf) {
                buf->len = min_t(size_t, len, buf->size);
                buf->offset = 0;
                port->stats.bytes_received += len;
        }
        return buf;
}

/*
 * Create a scatter-gather list representing our input buffer and put
 * it in the queue.
 *
 * Callers should take appropriate locks.
 */
static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
{
        struct scatterlist sg[1];
        int ret;

        sg_init_one(sg, buf->buf, buf->size);

        ret = virtqueue_add_inbuf(vq, sg, 1, buf, GFP_ATOMIC);
        virtqueue_kick(vq);
        if (!ret)
                ret = vq->num_free;
        return ret;
}

/* Discard any unread data this port has. Callers lockers. */
static void discard_port_data(struct port *port)
{
        struct port_buffer *buf;
        unsigned int err;

        if (!port->portdev) {
                /* Device has been unplugged.  vqs are already gone. */
                return;
        }
        buf = get_inbuf(port);

        err = 0;
        while (buf) {
                port->stats.bytes_discarded += buf->len - buf->offset;
                if (add_inbuf(port->in_vq, buf) < 0) {
                        err++;
                        free_buf(buf, false);
                }
                port->inbuf = NULL;
                buf = get_inbuf(port);
        }
        if (err)
                dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
                         err);
}

static bool port_has_data(struct port *port)
{
        unsigned long flags;
        bool ret;

        ret = false;
        spin_lock_irqsave(&port->inbuf_lock, flags);
        port->inbuf = get_inbuf(port);
        if (port->inbuf)
                ret = true;

        spin_unlock_irqrestore(&port->inbuf_lock, flags);
        return ret;
}

static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
                                  unsigned int event, unsigned int value)
{
        struct scatterlist sg[1];
        struct virtqueue *vq;
        unsigned int len;

        if (!use_multiport(portdev))
                return 0;

        vq = portdev->c_ovq;

        spin_lock(&portdev->c_ovq_lock);

        portdev->cpkt.id = cpu_to_virtio32(portdev->vdev, port_id);
        portdev->cpkt.event = cpu_to_virtio16(portdev->vdev, event);
        portdev->cpkt.value = cpu_to_virtio16(portdev->vdev, value);

        sg_init_one(sg, &portdev->cpkt, sizeof(struct virtio_console_control));

        if (virtqueue_add_outbuf(vq, sg, 1, &portdev->cpkt, GFP_ATOMIC) == 0) {
                virtqueue_kick(vq);
                while (!virtqueue_get_buf(vq, &len)
                        && !virtqueue_is_broken(vq))
                        cpu_relax();
        }

        spin_unlock(&portdev->c_ovq_lock);
        return 0;
}

static ssize_t send_control_msg(struct port *port, unsigned int event,
                                unsigned int value)
{
        /* Did the port get unplugged before userspace closed it? */
        if (port->portdev)
                return __send_control_msg(port->portdev, port->id, event, value);
        return 0;
}


/* Callers must take the port->outvq_lock */
static void reclaim_consumed_buffers(struct port *port)
{
        struct port_buffer *buf;
        unsigned int len;

        if (!port->portdev) {
                /* Device has been unplugged.  vqs are already gone. */
                return;
        }
        while ((buf = virtqueue_get_buf(port->out_vq, &len))) {
                free_buf(buf, false);
                port->outvq_full = false;
        }
}

static ssize_t __send_to_port(struct port *port, struct scatterlist *sg,
                              int nents, size_t in_count,
                              void *data, bool nonblock)
{
        struct virtqueue *out_vq;
        int err;
        unsigned long flags;
        unsigned int len;

        out_vq = port->out_vq;

        spin_lock_irqsave(&port->outvq_lock, flags);

        reclaim_consumed_buffers(port);

        err = virtqueue_add_outbuf(out_vq, sg, nents, data, GFP_ATOMIC);

        /* Tell Host to go! */
        virtqueue_kick(out_vq);

        if (err) {
                in_count = 0;
                goto done;
        }

        if (out_vq->num_free == 0)
                port->outvq_full = true;

        if (nonblock)
                goto done;

        /*
         * Wait till the host acknowledges it pushed out the data we
         * sent.  This is done for data from the hvc_console; the tty
         * operations are performed with spinlocks held so we can't
         * sleep here.  An alternative would be to copy the data to a
         * buffer and relax the spinning requirement.  The downside is
         * we need to kmalloc a GFP_ATOMIC buffer each time the
         * console driver writes something out.
         */
        while (!virtqueue_get_buf(out_vq, &len)
                && !virtqueue_is_broken(out_vq))
                cpu_relax();
done:
        spin_unlock_irqrestore(&port->outvq_lock, flags);

        port->stats.bytes_sent += in_count;
        /*
         * We're expected to return the amount of data we wrote -- all
         * of it
         */
        return in_count;
}

/*
 * Give out the data that's requested from the buffer that we have
 * queued up.
 */
static ssize_t fill_readbuf(struct port *port, char __user *out_buf,
                            size_t out_count, bool to_user)
{
        struct port_buffer *buf;
        unsigned long flags;

        if (!out_count || !port_has_data(port))
                return 0;

        buf = port->inbuf;
        out_count = min(out_count, buf->len - buf->offset);

        if (to_user) {
                ssize_t ret;

                ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count);
                if (ret)
                        return -EFAULT;
        } else {
                memcpy((__force char *)out_buf, buf->buf + buf->offset,
                       out_count);
        }

        buf->offset += out_count;

        if (buf->offset == buf->len) {
                /*
                 * We're done using all the data in this buffer.
                 * Re-queue so that the Host can send us more data.
                 */
                spin_lock_irqsave(&port->inbuf_lock, flags);
                port->inbuf = NULL;

                if (add_inbuf(port->in_vq, buf) < 0)
                        dev_warn(port->dev, "failed add_buf\n");

                spin_unlock_irqrestore(&port->inbuf_lock, flags);
        }
        /* Return the number of bytes actually copied */
        return out_count;
}

/* The condition that must be true for polling to end */
static bool will_read_block(struct port *port)
{
        if (!port->guest_connected) {
                /* Port got hot-unplugged. Let's exit. */
                return false;
        }
        return !port_has_data(port) && port->host_connected;
}

static bool will_write_block(struct port *port)
{
        bool ret;

        if (!port->guest_connected) {
                /* Port got hot-unplugged. Let's exit. */
                return false;
        }
        if (!port->host_connected)
                return true;

        spin_lock_irq(&port->outvq_lock);
        /*
         * Check if the Host has consumed any buffers since we last
         * sent data (this is only applicable for nonblocking ports).
         */
        reclaim_consumed_buffers(port);
        ret = port->outvq_full;
        spin_unlock_irq(&port->outvq_lock);

        return ret;
}

static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
                              size_t count, loff_t *offp)
{
        struct port *port;
        ssize_t ret;

        port = filp->private_data;

        /* Port is hot-unplugged. */
        if (!port->guest_connected)
                return -ENODEV;

        if (!port_has_data(port)) {
                /*
                 * If nothing's connected on the host just return 0 in
                 * case of list_empty; this tells the userspace app
                 * that there's no connection
                 */
                if (!port->host_connected)
                        return 0;
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;

                ret = wait_event_freezable(port->waitqueue,
                                           !will_read_block(port));
                if (ret < 0)
                        return ret;
        }
        /* Port got hot-unplugged while we were waiting above. */
        if (!port->guest_connected)
                return -ENODEV;
        /*
         * We could've received a disconnection message while we were
         * waiting for more data.
         *
         * This check is not clubbed in the if() statement above as we
         * might receive some data as well as the host could get
         * disconnected after we got woken up from our wait.  So we
         * really want to give off whatever data we have and only then
         * check for host_connected.
         */
        if (!port_has_data(port) && !port->host_connected)
                return 0;

        return fill_readbuf(port, ubuf, count, true);
}

static int wait_port_writable(struct port *port, bool nonblock)
{
        int ret;

        if (will_write_block(port)) {
                if (nonblock)
                        return -EAGAIN;

                ret = wait_event_freezable(port->waitqueue,
                                           !will_write_block(port));
                if (ret < 0)
                        return ret;
        }
        /* Port got hot-unplugged. */
        if (!port->guest_connected)
                return -ENODEV;

        return 0;
}

static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
                               size_t count, loff_t *offp)
{
        struct port *port;
        struct port_buffer *buf;
        ssize_t ret;
        bool nonblock;
        struct scatterlist sg[1];

        /* Userspace could be out to fool us */
        if (!count)
                return 0;

        port = filp->private_data;

        nonblock = filp->f_flags & O_NONBLOCK;

        ret = wait_port_writable(port, nonblock);
        if (ret < 0)
                return ret;

        count = min((size_t)(32 * 1024), count);

        buf = alloc_buf(port->portdev->vdev, count, 0);
        if (!buf)
                return -ENOMEM;

        ret = copy_from_user(buf->buf, ubuf, count);
        if (ret) {
                ret = -EFAULT;
                goto free_buf;
        }

        /*
         * We now ask send_buf() to not spin for generic ports -- we
         * can re-use the same code path that non-blocking file
         * descriptors take for blocking file descriptors since the
         * wait is already done and we're certain the write will go
         * through to the host.
         */
        nonblock = true;
        sg_init_one(sg, buf->buf, count);
        ret = __send_to_port(port, sg, 1, count, buf, nonblock);

        if (nonblock && ret > 0)
                goto out;

free_buf:
        free_buf(buf, true);
out:
        return ret;
}

struct sg_list {
        unsigned int n;
        unsigned int size;
        size_t len;
        struct scatterlist *sg;
};

static int pipe_to_sg(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
                        struct splice_desc *sd)
{
        struct sg_list *sgl = sd->u.data;
        unsigned int offset, len;

        if (sgl->n == sgl->size)
                return 0;

        /* Try lock this page */
        if (pipe_buf_try_steal(pipe, buf)) {
                /* Get reference and unlock page for moving */
                get_page(buf->page);
                unlock_page(buf->page);

                len = min(buf->len, sd->len);
                sg_set_page(&(sgl->sg[sgl->n]), buf->page, len, buf->offset);
        } else {
                /* Failback to copying a page */
                struct page *page = alloc_page(GFP_KERNEL);
                char *src;

                if (!page)
                        return -ENOMEM;

                offset = sd->pos & ~PAGE_MASK;

                len = sd->len;
                if (len + offset > PAGE_SIZE)
                        len = PAGE_SIZE - offset;

                src = kmap_atomic(buf->page);
                memcpy(page_address(page) + offset, src + buf->offset, len);
                kunmap_atomic(src);

                sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
        }
        sgl->n++;
        sgl->len += len;

        return len;
}

/* Faster zero-copy write by splicing */
static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe,
                                      struct file *filp, loff_t *ppos,
                                      size_t len, unsigned int flags)
{
        struct port *port = filp->private_data;
        struct sg_list sgl;
        ssize_t ret;
        struct port_buffer *buf;
        struct splice_desc sd = {
                .total_len = len,
                .flags = flags,
                .pos = *ppos,
                .u.data = &sgl,
        };
        unsigned int occupancy;

        /*
         * Rproc_serial does not yet support splice. To support splice
         * pipe_to_sg() must allocate dma-buffers and copy content from
         * regular pages to dma pages. And alloc_buf and free_buf must
         * support allocating and freeing such a list of dma-buffers.
         */
        if (is_rproc_serial(port->out_vq->vdev))
                return -EINVAL;

        pipe_lock(pipe);
        ret = 0;
        if (pipe_empty(pipe->head, pipe->tail))
                goto error_out;

        ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK);
        if (ret < 0)
                goto error_out;

        occupancy = pipe_occupancy(pipe->head, pipe->tail);
        buf = alloc_buf(port->portdev->vdev, 0, occupancy);

        if (!buf) {
                ret = -ENOMEM;
                goto error_out;
        }

        sgl.n = 0;
        sgl.len = 0;
        sgl.size = occupancy;
        sgl.sg = buf->sg;
        sg_init_table(sgl.sg, sgl.size);
        ret = __splice_from_pipe(pipe, &sd, pipe_to_sg);
        pipe_unlock(pipe);
        if (likely(ret > 0))
                ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true);

        if (unlikely(ret <= 0))
                free_buf(buf, true);
        return ret;

error_out:
        pipe_unlock(pipe);
        return ret;
}

static __poll_t port_fops_poll(struct file *filp, poll_table *wait)
{
        struct port *port;
        __poll_t ret;

        port = filp->private_data;
        poll_wait(filp, &port->waitqueue, wait);

        if (!port->guest_connected) {
                /* Port got unplugged */
                return EPOLLHUP;
        }
        ret = 0;
        if (!will_read_block(port))
                ret |= EPOLLIN | EPOLLRDNORM;
        if (!will_write_block(port))
                ret |= EPOLLOUT;
        if (!port->host_connected)
                ret |= EPOLLHUP;

        return ret;
}

static void remove_port(struct kref *kref);

static int port_fops_release(struct inode *inode, struct file *filp)
{
        struct port *port;

        port = filp->private_data;

        /* Notify host of port being closed */

        send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);

        spin_lock_irq(&port->inbuf_lock);
        port->guest_connected = false;

        discard_port_data(port);

        spin_unlock_irq(&port->inbuf_lock);

        spin_lock_irq(&port->outvq_lock);
        reclaim_consumed_buffers(port);
        spin_unlock_irq(&port->outvq_lock);

        reclaim_dma_bufs();
        /*
         * Locks aren't necessary here as a port can't be opened after
         * unplug, and if a port isn't unplugged, a kref would already
         * exist for the port.  Plus, taking ports_lock here would
         * create a dependency on other locks taken by functions
         * inside remove_port if we're the last holder of the port,
         * creating many problems.
         */
        kref_put(&port->kref, remove_port);

        return 0;
}

static int port_fops_open(struct inode *inode, struct file *filp)
{
        struct cdev *cdev = inode->i_cdev;
        struct port *port;
        int ret;

        /* We get the port with a kref here */
        port = find_port_by_devt(cdev->dev);
        if (!port) {
                /* Port was unplugged before we could proceed */
                return -ENXIO;
        }
        filp->private_data = port;

        /*
         * Don't allow opening of console port devices -- that's done
         * via /dev/hvc
         */
        if (is_console_port(port)) {
                ret = -ENXIO;
                goto out;
        }

        /* Allow only one process to open a particular port at a time */
        spin_lock_irq(&port->inbuf_lock);
        if (port->guest_connected) {
                spin_unlock_irq(&port->inbuf_lock);
                ret = -EBUSY;
                goto out;
        }

        port->guest_connected = true;
        spin_unlock_irq(&port->inbuf_lock);

        spin_lock_irq(&port->outvq_lock);
        /*
         * There might be a chance that we missed reclaiming a few
         * buffers in the window of the port getting previously closed
         * and opening now.
         */
        reclaim_consumed_buffers(port);
        spin_unlock_irq(&port->outvq_lock);

        nonseekable_open(inode, filp);

        /* Notify host of port being opened */
        send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1);

        return 0;
out:
        kref_put(&port->kref, remove_port);
        return ret;
}

static int port_fops_fasync(int fd, struct file *filp, int mode)
{
        struct port *port;

        port = filp->private_data;
        return fasync_helper(fd, filp, mode, &port->async_queue);
}

/*
 * The file operations that we support: programs in the guest can open
 * a console device, read from it, write to it, poll for data and
 * close it.  The devices are at
 *   /dev/vport<device number>p<port number>
 */
static const struct file_operations port_fops = {
        .owner = THIS_MODULE,
        .open  = port_fops_open,
        .read  = port_fops_read,
        .write = port_fops_write,
        .splice_write = port_fops_splice_write,
        .poll  = port_fops_poll,
        .release = port_fops_release,
        .fasync = port_fops_fasync,
        .llseek = no_llseek,
};

/*
 * The put_chars() callback is pretty straightforward.
 *
 * We turn the characters into a scatter-gather list, add it to the
 * output queue and then kick the Host.  Then we sit here waiting for
 * it to finish: inefficient in theory, but in practice
 * implementations will do it immediately.
 */
static int put_chars(u32 vtermno, const char *buf, int count)
{
        struct port *port;
        struct scatterlist sg[1];
        void *data;
        int ret;

        if (unlikely(early_put_chars))
                return early_put_chars(vtermno, buf, count);

        port = find_port_by_vtermno(vtermno);
        if (!port)
                return -EPIPE;

        data = kmemdup(buf, count, GFP_ATOMIC);
        if (!data)
                return -ENOMEM;

        sg_init_one(sg, data, count);
        ret = __send_to_port(port, sg, 1, count, data, false);
        kfree(data);
        return ret;
}

/*
 * get_chars() is the callback from the hvc_console infrastructure
 * when an interrupt is received.
 *
 * We call out to fill_readbuf that gets us the required data from the
 * buffers that are queued up.
 */
static int get_chars(u32 vtermno, char *buf, int count)
{
        struct port *port;

        /* If we've not set up the port yet, we have no input to give. */
        if (unlikely(early_put_chars))
                return 0;

        port = find_port_by_vtermno(vtermno);
        if (!port)
                return -EPIPE;

        /* If we don't have an input queue yet, we can't get input. */
        BUG_ON(!port->in_vq);

        return fill_readbuf(port, (__force char __user *)buf, count, false);
}

static void resize_console(struct port *port)
{
        struct virtio_device *vdev;

        /* The port could have been hot-unplugged */
        if (!port || !is_console_port(port))
                return;

        vdev = port->portdev->vdev;

        /* Don't test F_SIZE at all if we're rproc: not a valid feature! */
        if (!is_rproc_serial(vdev) &&
            virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE))
                hvc_resize(port->cons.hvc, port->cons.ws);
}

/* We set the configuration at this point, since we now have a tty */
static int notifier_add_vio(struct hvc_struct *hp, int data)
{
        struct port *port;

        port = find_port_by_vtermno(hp->vtermno);
        if (!port)
                return -EINVAL;

        hp->irq_requested = 1;
        resize_console(port);

        return 0;
}

static void notifier_del_vio(struct hvc_struct *hp, int data)
{
        hp->irq_requested = 0;
}

/* The operations for console ports. */
static const struct hv_ops hv_ops = {
        .get_chars = get_chars,
        .put_chars = put_chars,
        .notifier_add = notifier_add_vio,
        .notifier_del = notifier_del_vio,
        .notifier_hangup = notifier_del_vio,
};

/*
 * Console drivers are initialized very early so boot messages can go
 * out, so we do things slightly differently from the generic virtio
 * initialization of the net and block drivers.
 *
 * At this stage, the console is output-only.  It's too early to set
 * up a virtqueue, so we let the drivers do some boutique early-output
 * thing.
 */
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
{
        early_put_chars = put_chars;
        return hvc_instantiate(0, 0, &hv_ops);
}

static int init_port_console(struct port *port)
{
        int ret;

        /*
         * The Host's telling us this port is a console port.  Hook it
         * up with an hvc console.
         *
         * To set up and manage our virtual console, we call
         * hvc_alloc().
         *
         * The first argument of hvc_alloc() is the virtual console
         * number.  The second argument is the parameter for the
         * notification mechanism (like irq number).  We currently
         * leave this as zero, virtqueues have implicit notifications.
         *
         * The third argument is a "struct hv_ops" containing the
         * put_chars() get_chars(), notifier_add() and notifier_del()
         * pointers.  The final argument is the output buffer size: we
         * can do any size, so we put PAGE_SIZE here.
         */
        port->cons.vtermno = pdrvdata.next_vtermno;

        port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE);
        if (IS_ERR(port->cons.hvc)) {
                ret = PTR_ERR(port->cons.hvc);
                dev_err(port->dev,
                        "error %d allocating hvc for port\n", ret);
                port->cons.hvc = NULL;
                return ret;
        }
        spin_lock_irq(&pdrvdata_lock);
        pdrvdata.next_vtermno++;
        list_add_tail(&port->cons.list, &pdrvdata.consoles);
        spin_unlock_irq(&pdrvdata_lock);
        port->guest_connected = true;

        /*
         * Start using the new console output if this is the first
         * console to come up.
         */
        if (early_put_chars)
                early_put_chars = NULL;

        /* Notify host of port being opened */
        send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);

        return 0;
}

static ssize_t show_port_name(struct device *dev,
                              struct device_attribute *attr, char *buffer)
{
        struct port *port;

        port = dev_get_drvdata(dev);

        return sprintf(buffer, "%s\n", port->name);
}

static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL);

static struct attribute *port_sysfs_entries[] = {
        &dev_attr_name.attr,
        NULL
};

static const struct attribute_group port_attribute_group = {
        .name = NULL,           /* put in device directory */
        .attrs = port_sysfs_entries,
};

static int port_debugfs_show(struct seq_file *s, void *data)
{
        struct port *port = s->private;

        seq_printf(s, "name: %s\n", port->name ? port->name : "");
        seq_printf(s, "guest_connected: %d\n", port->guest_connected);
        seq_printf(s, "host_connected: %d\n", port->host_connected);
        seq_printf(s, "outvq_full: %d\n", port->outvq_full);
        seq_printf(s, "bytes_sent: %lu\n", port->stats.bytes_sent);
        seq_printf(s, "bytes_received: %lu\n", port->stats.bytes_received);
        seq_printf(s, "bytes_discarded: %lu\n", port->stats.bytes_discarded);
        seq_printf(s, "is_console: %s\n",
                   is_console_port(port) ? "yes" : "no");
        seq_printf(s, "console_vtermno: %u\n", port->cons.vtermno);

        return 0;
}

DEFINE_SHOW_ATTRIBUTE(port_debugfs);

static void set_console_size(struct port *port, u16 rows, u16 cols)
{
        if (!port || !is_console_port(port))
                return;

        port->cons.ws.ws_row = rows;
        port->cons.ws.ws_col = cols;
}

static int fill_queue(struct virtqueue *vq, spinlock_t *lock)
{
        struct port_buffer *buf;
        int nr_added_bufs;
        int ret;

        nr_added_bufs = 0;
        do {
                buf = alloc_buf(vq->vdev, PAGE_SIZE, 0);
                if (!buf)
                        return -ENOMEM;

                spin_lock_irq(lock);
                ret = add_inbuf(vq, buf);
                if (ret < 0) {
                        spin_unlock_irq(lock);
                        free_buf(buf, true);
                        return ret;
                }
                nr_added_bufs++;
                spin_unlock_irq(lock);
        } while (ret > 0);

        return nr_added_bufs;
}

static void send_sigio_to_port(struct port *port)
{
        if (port->async_queue && port->guest_connected)
                kill_fasync(&port->async_queue, SIGIO, POLL_OUT);
}

static int add_port(struct ports_device *portdev, u32 id)
{
        char debugfs_name[16];
        struct port *port;
        dev_t devt;
        int err;

        port = kmalloc(sizeof(*port), GFP_KERNEL);
        if (!port) {
                err = -ENOMEM;
                goto fail;
        }
        kref_init(&port->kref);

        port->portdev = portdev;
        port->id = id;

        port->name = NULL;
        port->inbuf = NULL;
        port->cons.hvc = NULL;
        port->async_queue = NULL;

        port->cons.ws.ws_row = port->cons.ws.ws_col = 0;
        port->cons.vtermno = 0;

        port->host_connected = port->guest_connected = false;
        port->stats = (struct port_stats) { 0 };

        port->outvq_full = false;

        port->in_vq = portdev->in_vqs[port->id];
        port->out_vq = portdev->out_vqs[port->id];

        port->cdev = cdev_alloc();
        if (!port->cdev) {
                dev_err(&port->portdev->vdev->dev, "Error allocating cdev\n");
                err = -ENOMEM;
                goto free_port;
        }
        port->cdev->ops = &port_fops;

        devt = MKDEV(portdev->chr_major, id);
        err = cdev_add(port->cdev, devt, 1);
        if (err < 0) {
                dev_err(&port->portdev->vdev->dev,
                        "Error %d adding cdev for port %u\n", err, id);
                goto free_cdev;
        }
        port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev,
                                  devt, port, "vport%up%u",
                                  port->portdev->vdev->index, id);
        if (IS_ERR(port->dev)) {
                err = PTR_ERR(port->dev);
                dev_err(&port->portdev->vdev->dev,
                        "Error %d creating device for port %u\n",
                        err, id);
                goto free_cdev;
        }

        spin_lock_init(&port->inbuf_lock);
        spin_lock_init(&port->outvq_lock);
        init_waitqueue_head(&port->waitqueue);

        /* We can safely ignore ENOSPC because it means
         * the queue already has buffers. Buffers are removed
         * only by virtcons_remove(), not by unplug_port()
         */
        err = fill_queue(port->in_vq, &port->inbuf_lock);
        if (err < 0 && err != -ENOSPC) {
                dev_err(port->dev, "Error allocating inbufs\n");
                goto free_device;
        }

        if (is_rproc_serial(port->portdev->vdev))
                /*
                 * For rproc_serial assume remote processor is connected.
                 * rproc_serial does not want the console port, only
                 * the generic port implementation.
                 */
                port->host_connected = true;
        else if (!use_multiport(port->portdev)) {
                /*
                 * If we're not using multiport support,
                 * this has to be a console port.
                 */
                err = init_port_console(port);
                if (err)
                        goto free_inbufs;
        }

        spin_lock_irq(&portdev->ports_lock);
        list_add_tail(&port->list, &port->portdev->ports);
        spin_unlock_irq(&portdev->ports_lock);

        /*
         * Tell the Host we're set so that it can send us various
         * configuration parameters for this port (eg, port name,
         * caching, whether this is a console port, etc.)
         */
        send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);

        /*
         * Finally, create the debugfs file that we can use to
         * inspect a port's state at any time
         */
        snprintf(debugfs_name, sizeof(debugfs_name), "vport%up%u",
                 port->portdev->vdev->index, id);
        port->debugfs_file = debugfs_create_file(debugfs_name, 0444,
                                                 pdrvdata.debugfs_dir,
                                                 port, &port_debugfs_fops);
        return 0;

free_inbufs:
free_device:
        device_destroy(pdrvdata.class, port->dev->devt);
free_cdev:
        cdev_del(port->cdev);
free_port:
        kfree(port);
fail:
        /* The host might want to notify management sw about port add failure */
        __send_control_msg(portdev, id, VIRTIO_CONSOLE_PORT_READY, 0);
        return err;
}

/* No users remain, remove all port-specific data. */
static void remove_port(struct kref *kref)
{
        struct port *port;

        port = container_of(kref, struct port, kref);

        kfree(port);
}

static void remove_port_data(struct port *port)
{
        spin_lock_irq(&port->inbuf_lock);
        /* Remove unused data this port might have received. */
        discard_port_data(port);
        spin_unlock_irq(&port->inbuf_lock);

        spin_lock_irq(&port->outvq_lock);
        reclaim_consumed_buffers(port);
        spin_unlock_irq(&port->outvq_lock);
}

/*
 * Port got unplugged.  Remove port from portdev's list and drop the
 * kref reference.  If no userspace has this port opened, it will
 * result in immediate removal the port.
 */
static void unplug_port(struct port *port)
{
        spin_lock_irq(&port->portdev->ports_lock);
        list_del(&port->list);
        spin_unlock_irq(&port->portdev->ports_lock);

        spin_lock_irq(&port->inbuf_lock);
        if (port->guest_connected) {
                /* Let the app know the port is going down. */
                send_sigio_to_port(port);

                /* Do this after sigio is actually sent */
                port->guest_connected = false;
                port->host_connected = false;

                wake_up_interruptible(&port->waitqueue);
        }
        spin_unlock_irq(&port->inbuf_lock);

        if (is_console_port(port)) {
                spin_lock_irq(&pdrvdata_lock);
                list_del(&port->cons.list);
                spin_unlock_irq(&pdrvdata_lock);
                hvc_remove(port->cons.hvc);
        }

        remove_port_data(port);

        /*
         * We should just assume the device itself has gone off --
         * else a close on an open port later will try to send out a
         * control message.
         */
        port->portdev = NULL;

        sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
        device_destroy(pdrvdata.class, port->dev->devt);
        cdev_del(port->cdev);

        debugfs_remove(port->debugfs_file);
        kfree(port->name);

        /*
         * Locks around here are not necessary - a port can't be
         * opened after we removed the port struct from ports_list
         * above.
         */
        kref_put(&port->kref, remove_port);
}

/* Any private messages that the Host and Guest want to share */
static void handle_control_message(struct virtio_device *vdev,
                                   struct ports_device *portdev,
                                   struct port_buffer *buf)
{
        struct virtio_console_control *cpkt;
        struct port *port;
        size_t name_size;
        int err;

        cpkt = (struct virtio_console_control *)(buf->buf + buf->offset);

        port = find_port_by_id(portdev, virtio32_to_cpu(vdev, cpkt->id));
        if (!port &&
            cpkt->event != cpu_to_virtio16(vdev, VIRTIO_CONSOLE_PORT_ADD)) {
                /* No valid header at start of buffer.  Drop it. */
                dev_dbg(&portdev->vdev->dev,
                        "Invalid index %u in control packet\n", cpkt->id);
                return;
        }

        switch (virtio16_to_cpu(vdev, cpkt->event)) {
        case VIRTIO_CONSOLE_PORT_ADD:
                if (port) {
                        dev_dbg(&portdev->vdev->dev,
                                "Port %u already added\n", port->id);
                        send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
                        break;
                }
                if (virtio32_to_cpu(vdev, cpkt->id) >=
                    portdev->max_nr_ports) {
                        dev_warn(&portdev->vdev->dev,
                                "Request for adding port with "
                                "out-of-bound id %u, max. supported id: %u\n",
                                cpkt->id, portdev->max_nr_ports - 1);
                        break;
                }
                add_port(portdev, virtio32_to_cpu(vdev, cpkt->id));
                break;
        case VIRTIO_CONSOLE_PORT_REMOVE:
                unplug_port(port);
                break;
        case VIRTIO_CONSOLE_CONSOLE_PORT:
                if (!cpkt->value)
                        break;
                if (is_console_port(port))
                        break;

                init_port_console(port);
                complete(&early_console_added);
                /*
                 * Could remove the port here in case init fails - but
                 * have to notify the host first.
                 */
                break;
        case VIRTIO_CONSOLE_RESIZE: {
                struct {
                        __u16 rows;
                        __u16 cols;
                } size;

                if (!is_console_port(port))
                        break;

                memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt),
                       sizeof(size));
                set_console_size(port, size.rows, size.cols);

                port->cons.hvc->irq_requested = 1;
                resize_console(port);
                break;
        }
        case VIRTIO_CONSOLE_PORT_OPEN:
                port->host_connected = virtio16_to_cpu(vdev, cpkt->value);
                wake_up_interruptible(&port->waitqueue);
                /*
                 * If the host port got closed and the host had any
                 * unconsumed buffers, we'll be able to reclaim them
                 * now.
                 */
                spin_lock_irq(&port->outvq_lock);
                reclaim_consumed_buffers(port);
                spin_unlock_irq(&port->outvq_lock);

                /*
                 * If the guest is connected, it'll be interested in
                 * knowing the host connection state changed.
                 */
                spin_lock_irq(&port->inbuf_lock);
                send_sigio_to_port(port);
                spin_unlock_irq(&port->inbuf_lock);
                break;
        case VIRTIO_CONSOLE_PORT_NAME:
                /*
                 * If we woke up after hibernation, we can get this
                 * again.  Skip it in that case.
                 */
                if (port->name)
                        break;

                /*
                 * Skip the size of the header and the cpkt to get the size
                 * of the name that was sent
                 */
                name_size = buf->len - buf->offset - sizeof(*cpkt) + 1;

                port->name = kmalloc(name_size, GFP_KERNEL);
                if (!port->name) {
                        dev_err(port->dev,
                                "Not enough space to store port name\n");
                        break;
                }
                strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
                        name_size - 1);
                port->name[name_size - 1] = 0;

                /*
                 * Since we only have one sysfs attribute, 'name',
                 * create it only if we have a name for the port.
                 */
                err = sysfs_create_group(&port->dev->kobj,
                                         &port_attribute_group);
                if (err) {
                        dev_err(port->dev,
                                "Error %d creating sysfs device attributes\n",
                                err);
                } else {
                        /*
                         * Generate a udev event so that appropriate
                         * symlinks can be created based on udev
                         * rules.
                         */
                        kobject_uevent(&port->dev->kobj, KOBJ_CHANGE);
                }
                break;
        }
}

static void control_work_handler(struct work_struct *work)
{
        struct ports_device *portdev;
        struct virtqueue *vq;
        struct port_buffer *buf;
        unsigned int len;

        portdev = container_of(work, struct ports_device, control_work);
        vq = portdev->c_ivq;

        spin_lock(&portdev->c_ivq_lock);
        while ((buf = virtqueue_get_buf(vq, &len))) {
                spin_unlock(&portdev->c_ivq_lock);

                buf->len = min_t(size_t, len, buf->size);
                buf->offset = 0;

                handle_control_message(vq->vdev, portdev, buf);

                spin_lock(&portdev->c_ivq_lock);
                if (add_inbuf(portdev->c_ivq, buf) < 0) {
                        dev_warn(&portdev->vdev->dev,
                                 "Error adding buffer to queue\n");
                        free_buf(buf, false);
                }
        }
        spin_unlock(&portdev->c_ivq_lock);
}

static void flush_bufs(struct virtqueue *vq, bool can_sleep)
{
        struct port_buffer *buf;
        unsigned int len;

        while ((buf = virtqueue_get_buf(vq, &len)))
                free_buf(buf, can_sleep);
}

static void out_intr(struct virtqueue *vq)
{
        struct port *port;

        port = find_port_by_vq(vq->vdev->priv, vq);
        if (!port) {
                flush_bufs(vq, false);
                return;
        }

        wake_up_interruptible(&port->waitqueue);
}

static void in_intr(struct virtqueue *vq)
{
        struct port *port;
        unsigned long flags;

        port = find_port_by_vq(vq->vdev->priv, vq);
        if (!port) {
                flush_bufs(vq, false);
                return;
        }

        spin_lock_irqsave(&port->inbuf_lock, flags);
        port->inbuf = get_inbuf(port);

        /*
         * Normally the port should not accept data when the port is
         * closed. For generic serial ports, the host won't (shouldn't)
         * send data till the guest is connected. But this condition
         * can be reached when a console port is not yet connected (no
         * tty is spawned) and the other side sends out data over the
         * vring, or when a remote devices start sending data before
         * the ports are opened.
         *
         * A generic serial port will discard data if not connected,
         * while console ports and rproc-serial ports accepts data at
         * any time. rproc-serial is initiated with guest_connected to
         * false because port_fops_open expects this. Console ports are
         * hooked up with an HVC console and is initialized with
         * guest_connected to true.
         */

        if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev))
                discard_port_data(port);

        /* Send a SIGIO indicating new data in case the process asked for it */
        send_sigio_to_port(port);

        spin_unlock_irqrestore(&port->inbuf_lock, flags);

        wake_up_interruptible(&port->waitqueue);

        if (is_console_port(port) && hvc_poll(port->cons.hvc))
                hvc_kick();
}

static void control_intr(struct virtqueue *vq)
{
        struct ports_device *portdev;

        portdev = vq->vdev->priv;
        schedule_work(&portdev->control_work);
}

static void config_intr(struct virtio_device *vdev)
{
        struct ports_device *portdev;

        portdev = vdev->priv;

        if (!use_multiport(portdev))
                schedule_work(&portdev->config_work);
}

static void config_work_handler(struct work_struct *work)
{
        struct ports_device *portdev;

        portdev = container_of(work, struct ports_device, config_work);
        if (!use_multiport(portdev)) {
                struct virtio_device *vdev;
                struct port *port;
                u16 rows, cols;

                vdev = portdev->vdev;
                virtio_cread(vdev, struct virtio_console_config, cols, &cols);
                virtio_cread(vdev, struct virtio_console_config, rows, &rows);

                port = find_port_by_id(portdev, 0);
                set_console_size(port, rows, cols);

                /*
                 * We'll use this way of resizing only for legacy
                 * support.  For newer userspace
                 * (VIRTIO_CONSOLE_F_MULTPORT+), use control messages
                 * to indicate console size changes so that it can be
                 * done per-port.
                 */
                resize_console(port);
        }
}

static int init_vqs(struct ports_device *portdev)
{
        vq_callback_t **io_callbacks;
        char **io_names;
        struct virtqueue **vqs;
        u32 i, j, nr_ports, nr_queues;
        int err;

        nr_ports = portdev->max_nr_ports;
        nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;

        vqs = kmalloc_array(nr_queues, sizeof(struct virtqueue *), GFP_KERNEL);
        io_callbacks = kmalloc_array(nr_queues, sizeof(vq_callback_t *),
                                     GFP_KERNEL);
        io_names = kmalloc_array(nr_queues, sizeof(char *), GFP_KERNEL);
        portdev->in_vqs = kmalloc_array(nr_ports, sizeof(struct virtqueue *),
                                        GFP_KERNEL);
        portdev->out_vqs = kmalloc_array(nr_ports, sizeof(struct virtqueue *),
                                         GFP_KERNEL);
        if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
            !portdev->out_vqs) {
                err = -ENOMEM;
                goto free;
        }

        /*
         * For backward compat (newer host but older guest), the host
         * spawns a console port first and also inits the vqs for port
         * 0 before others.
         */
        j = 0;
        io_callbacks[j] = in_intr;
        io_callbacks[j + 1] = out_intr;
        io_names[j] = "input";
        io_names[j + 1] = "output";
        j += 2;

        if (use_multiport(portdev)) {
                io_callbacks[j] = control_intr;
                io_callbacks[j + 1] = NULL;
                io_names[j] = "control-i";
                io_names[j + 1] = "control-o";

                for (i = 1; i < nr_ports; i++) {
                        j += 2;
                        io_callbacks[j] = in_intr;
                        io_callbacks[j + 1] = out_intr;
                        io_names[j] = "input";
                        io_names[j + 1] = "output";
                }
        }
        /* Find the queues. */
        err = virtio_find_vqs(portdev->vdev, nr_queues, vqs,
                              io_callbacks,
                              (const char **)io_names, NULL);
        if (err)
                goto free;

        j = 0;
        portdev->in_vqs[0] = vqs[0];
        portdev->out_vqs[0] = vqs[1];
        j += 2;
        if (use_multiport(portdev)) {
                portdev->c_ivq = vqs[j];
                portdev->c_ovq = vqs[j + 1];

                for (i = 1; i < nr_ports; i++) {
                        j += 2;
                        portdev->in_vqs[i] = vqs[j];
                        portdev->out_vqs[i] = vqs[j + 1];
                }
        }
        kfree(io_names);
        kfree(io_callbacks);
        kfree(vqs);

        return 0;

free:
        kfree(portdev->out_vqs);
        kfree(portdev->in_vqs);
        kfree(io_names);
        kfree(io_callbacks);
        kfree(vqs);

        return err;
}

static const struct file_operations portdev_fops = {
        .owner = THIS_MODULE,
};

static void remove_vqs(struct ports_device *portdev)
{
        struct virtqueue *vq;

        virtio_device_for_each_vq(portdev->vdev, vq) {
                struct port_buffer *buf;

                flush_bufs(vq, true);
                while ((buf = virtqueue_detach_unused_buf(vq)))
                        free_buf(buf, true);
        }
        portdev->vdev->config->del_vqs(portdev->vdev);
        kfree(portdev->in_vqs);
        kfree(portdev->out_vqs);
}

static void virtcons_remove(struct virtio_device *vdev)
{
        struct ports_device *portdev;
        struct port *port, *port2;

        portdev = vdev->priv;

        spin_lock_irq(&pdrvdata_lock);
        list_del(&portdev->list);
        spin_unlock_irq(&pdrvdata_lock);

        /* Disable interrupts for vqs */
        vdev->config->reset(vdev);
        /* Finish up work that's lined up */
        if (use_multiport(portdev))
                cancel_work_sync(&portdev->control_work);
        else
                cancel_work_sync(&portdev->config_work);

        list_for_each_entry_safe(port, port2, &portdev->ports, list)
                unplug_port(port);

        unregister_chrdev(portdev->chr_major, "virtio-portsdev");

        /*
         * When yanking out a device, we immediately lose the
         * (device-side) queues.  So there's no point in keeping the
         * guest side around till we drop our final reference.  This
         * also means that any ports which are in an open state will
         * have to just stop using the port, as the vqs are going
         * away.
         */
        remove_vqs(portdev);
        kfree(portdev);
}

/*
 * Once we're further in boot, we get probed like any other virtio
 * device.
 *
 * If the host also supports multiple console ports, we check the
 * config space to see how many ports the host has spawned.  We
 * initialize each port found.
 */
static int virtcons_probe(struct virtio_device *vdev)
{
        struct ports_device *portdev;
        int err;
        bool multiport;
        bool early = early_put_chars != NULL;

        /* We only need a config space if features are offered */
        if (!vdev->config->get &&

            (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)
             || virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT))) {
                dev_err(&vdev->dev, "%s failure: config access disabled\n",
                        __func__);
                return -EINVAL;
        }

        /* Ensure to read early_put_chars now */
        barrier();

        portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
        if (!portdev) {
                err = -ENOMEM;
                goto fail;
        }

        /* Attach this portdev to this virtio_device, and vice-versa. */
        portdev->vdev = vdev;
        vdev->priv = portdev;

        portdev->chr_major = register_chrdev(0, "virtio-portsdev",
                                             &portdev_fops);
        if (portdev->chr_major < 0) {
                dev_err(&vdev->dev,
                        "Error %d registering chrdev for device %u\n",
                        portdev->chr_major, vdev->index);
                err = portdev->chr_major;
                goto free;
        }

        multiport = false;
        portdev->max_nr_ports = 1;

        /* Don't test MULTIPORT at all if we're rproc: not a valid feature! */
        if (!is_rproc_serial(vdev) &&
            virtio_cread_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
                                 struct virtio_console_config, max_nr_ports,
                                 &portdev->max_nr_ports) == 0) {
                multiport = true;
        }

        err = init_vqs(portdev);
        if (err < 0) {
                dev_err(&vdev->dev, "Error %d initializing vqs\n", err);
                goto free_chrdev;
        }

        spin_lock_init(&portdev->ports_lock);
        INIT_LIST_HEAD(&portdev->ports);
        INIT_LIST_HEAD(&portdev->list);

        virtio_device_ready(portdev->vdev);

        INIT_WORK(&portdev->config_work, &config_work_handler);
        INIT_WORK(&portdev->control_work, &control_work_handler);

        if (multiport) {
                spin_lock_init(&portdev->c_ivq_lock);
                spin_lock_init(&portdev->c_ovq_lock);

                err = fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
                if (err < 0) {
                        dev_err(&vdev->dev,
                                "Error allocating buffers for control queue\n");
                        /*
                         * The host might want to notify mgmt sw about device
                         * add failure.
                         */
                        __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
                                           VIRTIO_CONSOLE_DEVICE_READY, 0);
                        /* Device was functional: we need full cleanup. */
                        virtcons_remove(vdev);
                        return err;
                }
        } else {
                /*
                 * For backward compatibility: Create a console port
                 * if we're running on older host.
                 */
                add_port(portdev, 0);
        }

        spin_lock_irq(&pdrvdata_lock);
        list_add_tail(&portdev->list, &pdrvdata.portdevs);
        spin_unlock_irq(&pdrvdata_lock);

        __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
                           VIRTIO_CONSOLE_DEVICE_READY, 1);

        /*
         * If there was an early virtio console, assume that there are no
         * other consoles. We need to wait until the hvc_alloc matches the
         * hvc_instantiate, otherwise tty_open will complain, resulting in
         * a "Warning: unable to open an initial console" boot failure.
         * Without multiport this is done in add_port above. With multiport
         * this might take some host<->guest communication - thus we have to
         * wait.
         */
        if (multiport && early)
                wait_for_completion(&early_console_added);

        return 0;

free_chrdev:
        unregister_chrdev(portdev->chr_major, "virtio-portsdev");
free:
        kfree(portdev);
fail:
        return err;
}

static const struct virtio_device_id id_table[] = {
        { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
        { 0 },
};
MODULE_DEVICE_TABLE(virtio, id_table);

static const unsigned int features[] = {
        VIRTIO_CONSOLE_F_SIZE,
        VIRTIO_CONSOLE_F_MULTIPORT,
};

static const struct virtio_device_id rproc_serial_id_table[] = {
#if IS_ENABLED(CONFIG_REMOTEPROC)
        { VIRTIO_ID_RPROC_SERIAL, VIRTIO_DEV_ANY_ID },
#endif
        { 0 },
};
MODULE_DEVICE_TABLE(virtio, rproc_serial_id_table);

static const unsigned int rproc_serial_features[] = {
};

#ifdef CONFIG_PM_SLEEP
static int virtcons_freeze(struct virtio_device *vdev)
{
        struct ports_device *portdev;
        struct port *port;

        portdev = vdev->priv;

        vdev->config->reset(vdev);

        if (use_multiport(portdev))
                virtqueue_disable_cb(portdev->c_ivq);
        cancel_work_sync(&portdev->control_work);
        cancel_work_sync(&portdev->config_work);
        /*
         * Once more: if control_work_handler() was running, it would
         * enable the cb as the last step.
         */
        if (use_multiport(portdev))
                virtqueue_disable_cb(portdev->c_ivq);

        list_for_each_entry(port, &portdev->ports, list) {
                virtqueue_disable_cb(port->in_vq);
                virtqueue_disable_cb(port->out_vq);
                /*
                 * We'll ask the host later if the new invocation has
                 * the port opened or closed.
                 */
                port->host_connected = false;
                remove_port_data(port);
        }
        remove_vqs(portdev);

        return 0;
}

static int virtcons_restore(struct virtio_device *vdev)
{
        struct ports_device *portdev;
        struct port *port;
        int ret;

        portdev = vdev->priv;

        ret = init_vqs(portdev);
        if (ret)
                return ret;

        virtio_device_ready(portdev->vdev);

        if (use_multiport(portdev))
                fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);

        list_for_each_entry(port, &portdev->ports, list) {
                port->in_vq = portdev->in_vqs[port->id];
                port->out_vq = portdev->out_vqs[port->id];

                fill_queue(port->in_vq, &port->inbuf_lock);

                /* Get port open/close status on the host */
                send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);

                /*
                 * If a port was open at the time of suspending, we
                 * have to let the host know that it's still open.
                 */
                if (port->guest_connected)
                        send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
        }
        return 0;
}
#endif

static struct virtio_driver virtio_console = {
        .feature_table = features,
        .feature_table_size = ARRAY_SIZE(features),
        .driver.name =  KBUILD_MODNAME,
        .driver.owner = THIS_MODULE,
        .id_table =     id_table,
        .probe =        virtcons_probe,
        .remove =       virtcons_remove,
        .config_changed = config_intr,
#ifdef CONFIG_PM_SLEEP
        .freeze =       virtcons_freeze,
        .restore =      virtcons_restore,
#endif
};

static struct virtio_driver virtio_rproc_serial = {
        .feature_table = rproc_serial_features,
        .feature_table_size = ARRAY_SIZE(rproc_serial_features),
        .driver.name =  "virtio_rproc_serial",
        .driver.owner = THIS_MODULE,
        .id_table =     rproc_serial_id_table,
        .probe =        virtcons_probe,
        .remove =       virtcons_remove,
};

static int __init init(void)
{
        int err;

        pdrvdata.class = class_create(THIS_MODULE, "virtio-ports");
        if (IS_ERR(pdrvdata.class)) {
                err = PTR_ERR(pdrvdata.class);
                pr_err("Error %d creating virtio-ports class\n", err);
                return err;
        }

        pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL);
        INIT_LIST_HEAD(&pdrvdata.consoles);
        INIT_LIST_HEAD(&pdrvdata.portdevs);

        err = register_virtio_driver(&virtio_console);
        if (err < 0) {
                pr_err("Error %d registering virtio driver\n", err);
                goto free;
        }
        err = register_virtio_driver(&virtio_rproc_serial);
        if (err < 0) {
                pr_err("Error %d registering virtio rproc serial driver\n",
                       err);
                goto unregister;
        }
        return 0;
unregister:
        unregister_virtio_driver(&virtio_console);
free:
        debugfs_remove_recursive(pdrvdata.debugfs_dir);
        class_destroy(pdrvdata.class);
        return err;
}

static void __exit fini(void)
{
        reclaim_dma_bufs();

        unregister_virtio_driver(&virtio_console);
        unregister_virtio_driver(&virtio_rproc_serial);

        class_destroy(pdrvdata.class);
        debugfs_remove_recursive(pdrvdata.debugfs_dir);
}
module_init(init);
module_exit(fini);

MODULE_DESCRIPTION("Virtio console driver");
MODULE_LICENSE("GPL");