linux/drivers/extcon/extcon-max8997.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2//
   3// extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC
   4//
   5//  Copyright (C) 2012 Samsung Electronics
   6//  Donggeun Kim <dg77.kim@samsung.com>
   7
   8#include <linux/devm-helpers.h>
   9#include <linux/kernel.h>
  10#include <linux/module.h>
  11#include <linux/i2c.h>
  12#include <linux/slab.h>
  13#include <linux/interrupt.h>
  14#include <linux/err.h>
  15#include <linux/platform_device.h>
  16#include <linux/kobject.h>
  17#include <linux/mfd/max8997.h>
  18#include <linux/mfd/max8997-private.h>
  19#include <linux/extcon-provider.h>
  20#include <linux/irqdomain.h>
  21
  22#define DEV_NAME                        "max8997-muic"
  23#define DELAY_MS_DEFAULT                20000           /* unit: millisecond */
  24
  25enum max8997_muic_adc_debounce_time {
  26        ADC_DEBOUNCE_TIME_0_5MS = 0,    /* 0.5ms */
  27        ADC_DEBOUNCE_TIME_10MS,         /* 10ms */
  28        ADC_DEBOUNCE_TIME_25MS,         /* 25ms */
  29        ADC_DEBOUNCE_TIME_38_62MS,      /* 38.62ms */
  30};
  31
  32struct max8997_muic_irq {
  33        unsigned int irq;
  34        const char *name;
  35        unsigned int virq;
  36};
  37
  38static struct max8997_muic_irq muic_irqs[] = {
  39        { MAX8997_MUICIRQ_ADCError,     "muic-ADCERROR" },
  40        { MAX8997_MUICIRQ_ADCLow,       "muic-ADCLOW" },
  41        { MAX8997_MUICIRQ_ADC,          "muic-ADC" },
  42        { MAX8997_MUICIRQ_VBVolt,       "muic-VBVOLT" },
  43        { MAX8997_MUICIRQ_DBChg,        "muic-DBCHG" },
  44        { MAX8997_MUICIRQ_DCDTmr,       "muic-DCDTMR" },
  45        { MAX8997_MUICIRQ_ChgDetRun,    "muic-CHGDETRUN" },
  46        { MAX8997_MUICIRQ_ChgTyp,       "muic-CHGTYP" },
  47        { MAX8997_MUICIRQ_OVP,          "muic-OVP" },
  48        { MAX8997_PMICIRQ_CHGINS,       "pmic-CHGINS" },
  49        { MAX8997_PMICIRQ_CHGRM,        "pmic-CHGRM" },
  50};
  51
  52/* Define supported cable type */
  53enum max8997_muic_acc_type {
  54        MAX8997_MUIC_ADC_GROUND = 0x0,
  55        MAX8997_MUIC_ADC_MHL,                   /* MHL*/
  56        MAX8997_MUIC_ADC_REMOTE_S1_BUTTON,
  57        MAX8997_MUIC_ADC_REMOTE_S2_BUTTON,
  58        MAX8997_MUIC_ADC_REMOTE_S3_BUTTON,
  59        MAX8997_MUIC_ADC_REMOTE_S4_BUTTON,
  60        MAX8997_MUIC_ADC_REMOTE_S5_BUTTON,
  61        MAX8997_MUIC_ADC_REMOTE_S6_BUTTON,
  62        MAX8997_MUIC_ADC_REMOTE_S7_BUTTON,
  63        MAX8997_MUIC_ADC_REMOTE_S8_BUTTON,
  64        MAX8997_MUIC_ADC_REMOTE_S9_BUTTON,
  65        MAX8997_MUIC_ADC_REMOTE_S10_BUTTON,
  66        MAX8997_MUIC_ADC_REMOTE_S11_BUTTON,
  67        MAX8997_MUIC_ADC_REMOTE_S12_BUTTON,
  68        MAX8997_MUIC_ADC_RESERVED_ACC_1,
  69        MAX8997_MUIC_ADC_RESERVED_ACC_2,
  70        MAX8997_MUIC_ADC_RESERVED_ACC_3,
  71        MAX8997_MUIC_ADC_RESERVED_ACC_4,
  72        MAX8997_MUIC_ADC_RESERVED_ACC_5,
  73        MAX8997_MUIC_ADC_CEA936_AUDIO,
  74        MAX8997_MUIC_ADC_PHONE_POWERED_DEV,
  75        MAX8997_MUIC_ADC_TTY_CONVERTER,
  76        MAX8997_MUIC_ADC_UART_CABLE,
  77        MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG,
  78        MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF,  /* JIG-USB-OFF */
  79        MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON,   /* JIG-USB-ON */
  80        MAX8997_MUIC_ADC_AV_CABLE_NOLOAD,       /* DESKDOCK */
  81        MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG,
  82        MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */
  83        MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON,  /* CARDOCK */
  84        MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE,
  85        MAX8997_MUIC_ADC_OPEN,                  /* OPEN */
  86};
  87
  88enum max8997_muic_cable_group {
  89        MAX8997_CABLE_GROUP_ADC = 0,
  90        MAX8997_CABLE_GROUP_ADC_GND,
  91        MAX8997_CABLE_GROUP_CHG,
  92        MAX8997_CABLE_GROUP_VBVOLT,
  93};
  94
  95enum max8997_muic_usb_type {
  96        MAX8997_USB_HOST,
  97        MAX8997_USB_DEVICE,
  98};
  99
 100enum max8997_muic_charger_type {
 101        MAX8997_CHARGER_TYPE_NONE = 0,
 102        MAX8997_CHARGER_TYPE_USB,
 103        MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT,
 104        MAX8997_CHARGER_TYPE_DEDICATED_CHG,
 105        MAX8997_CHARGER_TYPE_500MA,
 106        MAX8997_CHARGER_TYPE_1A,
 107        MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7,
 108};
 109
 110struct max8997_muic_info {
 111        struct device *dev;
 112        struct i2c_client *muic;
 113        struct extcon_dev *edev;
 114        int prev_cable_type;
 115        int prev_chg_type;
 116        u8 status[2];
 117
 118        int irq;
 119        struct work_struct irq_work;
 120        struct mutex mutex;
 121
 122        struct max8997_muic_platform_data *muic_pdata;
 123        enum max8997_muic_charger_type pre_charger_type;
 124
 125        /*
 126         * Use delayed workqueue to detect cable state and then
 127         * notify cable state to notifiee/platform through uevent.
 128         * After completing the booting of platform, the extcon provider
 129         * driver should notify cable state to upper layer.
 130         */
 131        struct delayed_work wq_detcable;
 132
 133        /*
 134         * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
 135         * h/w path of COMP2/COMN1 on CONTROL1 register.
 136         */
 137        int path_usb;
 138        int path_uart;
 139};
 140
 141static const unsigned int max8997_extcon_cable[] = {
 142        EXTCON_USB,
 143        EXTCON_USB_HOST,
 144        EXTCON_CHG_USB_SDP,
 145        EXTCON_CHG_USB_DCP,
 146        EXTCON_CHG_USB_FAST,
 147        EXTCON_CHG_USB_SLOW,
 148        EXTCON_CHG_USB_CDP,
 149        EXTCON_DISP_MHL,
 150        EXTCON_DOCK,
 151        EXTCON_JIG,
 152        EXTCON_NONE,
 153};
 154
 155/*
 156 * max8997_muic_set_debounce_time - Set the debounce time of ADC
 157 * @info: the instance including private data of max8997 MUIC
 158 * @time: the debounce time of ADC
 159 */
 160static int max8997_muic_set_debounce_time(struct max8997_muic_info *info,
 161                enum max8997_muic_adc_debounce_time time)
 162{
 163        int ret;
 164
 165        switch (time) {
 166        case ADC_DEBOUNCE_TIME_0_5MS:
 167        case ADC_DEBOUNCE_TIME_10MS:
 168        case ADC_DEBOUNCE_TIME_25MS:
 169        case ADC_DEBOUNCE_TIME_38_62MS:
 170                ret = max8997_update_reg(info->muic,
 171                                          MAX8997_MUIC_REG_CONTROL3,
 172                                          time << CONTROL3_ADCDBSET_SHIFT,
 173                                          CONTROL3_ADCDBSET_MASK);
 174                if (ret) {
 175                        dev_err(info->dev, "failed to set ADC debounce time\n");
 176                        return ret;
 177                }
 178                break;
 179        default:
 180                dev_err(info->dev, "invalid ADC debounce time\n");
 181                return -EINVAL;
 182        }
 183
 184        return 0;
 185};
 186
 187/*
 188 * max8997_muic_set_path - Set hardware line according to attached cable
 189 * @info: the instance including private data of max8997 MUIC
 190 * @value: the path according to attached cable
 191 * @attached: the state of cable (true:attached, false:detached)
 192 *
 193 * The max8997 MUIC device share outside H/W line among a varity of cables,
 194 * so this function set internal path of H/W line according to the type of
 195 * attached cable.
 196 */
 197static int max8997_muic_set_path(struct max8997_muic_info *info,
 198                u8 val, bool attached)
 199{
 200        int ret;
 201        u8 ctrl1, ctrl2 = 0;
 202
 203        if (attached)
 204                ctrl1 = val;
 205        else
 206                ctrl1 = CONTROL1_SW_OPEN;
 207
 208        ret = max8997_update_reg(info->muic,
 209                        MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK);
 210        if (ret < 0) {
 211                dev_err(info->dev, "failed to update MUIC register\n");
 212                return ret;
 213        }
 214
 215        if (attached)
 216                ctrl2 |= CONTROL2_CPEN_MASK;    /* LowPwr=0, CPEn=1 */
 217        else
 218                ctrl2 |= CONTROL2_LOWPWR_MASK;  /* LowPwr=1, CPEn=0 */
 219
 220        ret = max8997_update_reg(info->muic,
 221                        MAX8997_MUIC_REG_CONTROL2, ctrl2,
 222                        CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
 223        if (ret < 0) {
 224                dev_err(info->dev, "failed to update MUIC register\n");
 225                return ret;
 226        }
 227
 228        dev_info(info->dev,
 229                "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
 230                ctrl1, ctrl2, attached ? "attached" : "detached");
 231
 232        return 0;
 233}
 234
 235/*
 236 * max8997_muic_get_cable_type - Return cable type and check cable state
 237 * @info: the instance including private data of max8997 MUIC
 238 * @group: the path according to attached cable
 239 * @attached: store cable state and return
 240 *
 241 * This function check the cable state either attached or detached,
 242 * and then divide precise type of cable according to cable group.
 243 *      - MAX8997_CABLE_GROUP_ADC
 244 *      - MAX8997_CABLE_GROUP_CHG
 245 */
 246static int max8997_muic_get_cable_type(struct max8997_muic_info *info,
 247                enum max8997_muic_cable_group group, bool *attached)
 248{
 249        int cable_type = 0;
 250        int adc;
 251        int chg_type;
 252
 253        switch (group) {
 254        case MAX8997_CABLE_GROUP_ADC:
 255                /*
 256                 * Read ADC value to check cable type and decide cable state
 257                 * according to cable type
 258                 */
 259                adc = info->status[0] & STATUS1_ADC_MASK;
 260                adc >>= STATUS1_ADC_SHIFT;
 261
 262                /*
 263                 * Check current cable state/cable type and store cable type
 264                 * (info->prev_cable_type) for handling cable when cable is
 265                 * detached.
 266                 */
 267                if (adc == MAX8997_MUIC_ADC_OPEN) {
 268                        *attached = false;
 269
 270                        cable_type = info->prev_cable_type;
 271                        info->prev_cable_type = MAX8997_MUIC_ADC_OPEN;
 272                } else {
 273                        *attached = true;
 274
 275                        cable_type = info->prev_cable_type = adc;
 276                }
 277                break;
 278        case MAX8997_CABLE_GROUP_CHG:
 279                /*
 280                 * Read charger type to check cable type and decide cable state
 281                 * according to type of charger cable.
 282                 */
 283                chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
 284                chg_type >>= STATUS2_CHGTYP_SHIFT;
 285
 286                if (chg_type == MAX8997_CHARGER_TYPE_NONE) {
 287                        *attached = false;
 288
 289                        cable_type = info->prev_chg_type;
 290                        info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE;
 291                } else {
 292                        *attached = true;
 293
 294                        /*
 295                         * Check current cable state/cable type and store cable
 296                         * type(info->prev_chg_type) for handling cable when
 297                         * charger cable is detached.
 298                         */
 299                        cable_type = info->prev_chg_type = chg_type;
 300                }
 301
 302                break;
 303        default:
 304                dev_err(info->dev, "Unknown cable group (%d)\n", group);
 305                cable_type = -EINVAL;
 306                break;
 307        }
 308
 309        return cable_type;
 310}
 311
 312static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 313                        enum max8997_muic_usb_type usb_type, bool attached)
 314{
 315        int ret = 0;
 316
 317        ret = max8997_muic_set_path(info, info->path_usb, attached);
 318        if (ret < 0) {
 319                dev_err(info->dev, "failed to update muic register\n");
 320                return ret;
 321        }
 322
 323        switch (usb_type) {
 324        case MAX8997_USB_HOST:
 325                extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 326                break;
 327        case MAX8997_USB_DEVICE:
 328                extcon_set_state_sync(info->edev, EXTCON_USB, attached);
 329                extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 330                                        attached);
 331                break;
 332        default:
 333                dev_err(info->dev, "failed to detect %s usb cable\n",
 334                        attached ? "attached" : "detached");
 335                return -EINVAL;
 336        }
 337
 338        return 0;
 339}
 340
 341static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 342                        int cable_type, bool attached)
 343{
 344        int ret = 0;
 345
 346        ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 347        if (ret) {
 348                dev_err(info->dev, "failed to update muic register\n");
 349                return ret;
 350        }
 351
 352        switch (cable_type) {
 353        case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 354        case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
 355                extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
 356                break;
 357        default:
 358                dev_err(info->dev, "failed to detect %s dock device\n",
 359                        attached ? "attached" : "detached");
 360                return -EINVAL;
 361        }
 362
 363        return 0;
 364}
 365
 366static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 367                        bool attached)
 368{
 369        int ret = 0;
 370
 371        /* switch to UART */
 372        ret = max8997_muic_set_path(info, info->path_uart, attached);
 373        if (ret) {
 374                dev_err(info->dev, "failed to update muic register\n");
 375                return ret;
 376        }
 377
 378        extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 379
 380        return 0;
 381}
 382
 383static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 384{
 385        int cable_type;
 386        bool attached;
 387        int ret = 0;
 388
 389        /* Check cable state which is either detached or attached */
 390        cable_type = max8997_muic_get_cable_type(info,
 391                                MAX8997_CABLE_GROUP_ADC, &attached);
 392
 393        switch (cable_type) {
 394        case MAX8997_MUIC_ADC_GROUND:
 395                ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached);
 396                if (ret < 0)
 397                        return ret;
 398                break;
 399        case MAX8997_MUIC_ADC_MHL:
 400                extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 401                break;
 402        case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 403        case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
 404                ret = max8997_muic_handle_usb(info,
 405                                             MAX8997_USB_DEVICE, attached);
 406                if (ret < 0)
 407                        return ret;
 408                break;
 409        case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 410        case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
 411                ret = max8997_muic_handle_dock(info, cable_type, attached);
 412                if (ret < 0)
 413                        return ret;
 414                break;
 415        case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF:
 416                ret = max8997_muic_handle_jig_uart(info, attached);
 417                break;
 418        case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON:
 419        case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON:
 420        case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON:
 421        case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON:
 422        case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON:
 423        case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON:
 424        case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON:
 425        case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON:
 426        case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON:
 427        case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON:
 428        case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON:
 429        case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON:
 430        case MAX8997_MUIC_ADC_RESERVED_ACC_1:
 431        case MAX8997_MUIC_ADC_RESERVED_ACC_2:
 432        case MAX8997_MUIC_ADC_RESERVED_ACC_3:
 433        case MAX8997_MUIC_ADC_RESERVED_ACC_4:
 434        case MAX8997_MUIC_ADC_RESERVED_ACC_5:
 435        case MAX8997_MUIC_ADC_CEA936_AUDIO:
 436        case MAX8997_MUIC_ADC_PHONE_POWERED_DEV:
 437        case MAX8997_MUIC_ADC_TTY_CONVERTER:
 438        case MAX8997_MUIC_ADC_UART_CABLE:
 439        case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG:
 440        case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG:
 441        case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE:
 442                /*
 443                 * This cable isn't used in general case if it is specially
 444                 * needed to detect additional cable, should implement
 445                 * proper operation when this cable is attached/detached.
 446                 */
 447                dev_info(info->dev,
 448                        "cable is %s but it isn't used (type:0x%x)\n",
 449                        attached ? "attached" : "detached", cable_type);
 450                return -EAGAIN;
 451        default:
 452                dev_err(info->dev,
 453                        "failed to detect %s unknown cable (type:0x%x)\n",
 454                        attached ? "attached" : "detached", cable_type);
 455                return -EINVAL;
 456        }
 457
 458        return 0;
 459}
 460
 461static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 462{
 463        int chg_type;
 464        bool attached;
 465        int adc;
 466
 467        chg_type = max8997_muic_get_cable_type(info,
 468                                MAX8997_CABLE_GROUP_CHG, &attached);
 469
 470        switch (chg_type) {
 471        case MAX8997_CHARGER_TYPE_NONE:
 472                break;
 473        case MAX8997_CHARGER_TYPE_USB:
 474                adc = info->status[0] & STATUS1_ADC_MASK;
 475                adc >>= STATUS1_ADC_SHIFT;
 476
 477                if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) {
 478                        max8997_muic_handle_usb(info,
 479                                        MAX8997_USB_DEVICE, attached);
 480                }
 481                break;
 482        case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
 483                extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 484                                        attached);
 485                break;
 486        case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
 487                extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 488                                        attached);
 489                break;
 490        case MAX8997_CHARGER_TYPE_500MA:
 491                extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 492                                        attached);
 493                break;
 494        case MAX8997_CHARGER_TYPE_1A:
 495                extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 496                                        attached);
 497                break;
 498        default:
 499                dev_err(info->dev,
 500                        "failed to detect %s unknown chg cable (type:0x%x)\n",
 501                        attached ? "attached" : "detached", chg_type);
 502                return -EINVAL;
 503        }
 504
 505        return 0;
 506}
 507
 508static void max8997_muic_irq_work(struct work_struct *work)
 509{
 510        struct max8997_muic_info *info = container_of(work,
 511                        struct max8997_muic_info, irq_work);
 512        int irq_type = 0;
 513        int i, ret;
 514
 515        if (!info->edev)
 516                return;
 517
 518        mutex_lock(&info->mutex);
 519
 520        for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 521                if (info->irq == muic_irqs[i].virq)
 522                        irq_type = muic_irqs[i].irq;
 523
 524        ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
 525                                2, info->status);
 526        if (ret) {
 527                dev_err(info->dev, "failed to read muic register\n");
 528                mutex_unlock(&info->mutex);
 529                return;
 530        }
 531
 532        switch (irq_type) {
 533        case MAX8997_MUICIRQ_ADCError:
 534        case MAX8997_MUICIRQ_ADCLow:
 535        case MAX8997_MUICIRQ_ADC:
 536                /* Handle all of cable except for charger cable */
 537                ret = max8997_muic_adc_handler(info);
 538                break;
 539        case MAX8997_MUICIRQ_VBVolt:
 540        case MAX8997_MUICIRQ_DBChg:
 541        case MAX8997_MUICIRQ_DCDTmr:
 542        case MAX8997_MUICIRQ_ChgDetRun:
 543        case MAX8997_MUICIRQ_ChgTyp:
 544        case MAX8997_PMICIRQ_CHGINS:
 545        case MAX8997_PMICIRQ_CHGRM:
 546                /* Handle charger cable */
 547                ret = max8997_muic_chg_handler(info);
 548                break;
 549        case MAX8997_MUICIRQ_OVP:
 550                break;
 551        default:
 552                dev_info(info->dev, "misc interrupt: irq %d occurred\n",
 553                                irq_type);
 554                mutex_unlock(&info->mutex);
 555                return;
 556        }
 557
 558        if (ret < 0)
 559                dev_err(info->dev, "failed to handle MUIC interrupt\n");
 560
 561        mutex_unlock(&info->mutex);
 562}
 563
 564static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
 565{
 566        struct max8997_muic_info *info = data;
 567
 568        dev_dbg(info->dev, "irq:%d\n", irq);
 569        info->irq = irq;
 570
 571        schedule_work(&info->irq_work);
 572
 573        return IRQ_HANDLED;
 574}
 575
 576static int max8997_muic_detect_dev(struct max8997_muic_info *info)
 577{
 578        int ret = 0;
 579        int adc;
 580        int chg_type;
 581        bool attached;
 582
 583        mutex_lock(&info->mutex);
 584
 585        /* Read STATUSx register to detect accessory */
 586        ret = max8997_bulk_read(info->muic,
 587                        MAX8997_MUIC_REG_STATUS1, 2, info->status);
 588        if (ret) {
 589                dev_err(info->dev, "failed to read MUIC register\n");
 590                mutex_unlock(&info->mutex);
 591                return ret;
 592        }
 593
 594        adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC,
 595                                        &attached);
 596        if (attached && adc != MAX8997_MUIC_ADC_OPEN) {
 597                ret = max8997_muic_adc_handler(info);
 598                if (ret < 0) {
 599                        dev_err(info->dev, "Cannot detect ADC cable\n");
 600                        mutex_unlock(&info->mutex);
 601                        return ret;
 602                }
 603        }
 604
 605        chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG,
 606                                        &attached);
 607        if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) {
 608                ret = max8997_muic_chg_handler(info);
 609                if (ret < 0) {
 610                        dev_err(info->dev, "Cannot detect charger cable\n");
 611                        mutex_unlock(&info->mutex);
 612                        return ret;
 613                }
 614        }
 615
 616        mutex_unlock(&info->mutex);
 617
 618        return 0;
 619}
 620
 621static void max8997_muic_detect_cable_wq(struct work_struct *work)
 622{
 623        struct max8997_muic_info *info = container_of(to_delayed_work(work),
 624                                struct max8997_muic_info, wq_detcable);
 625        int ret;
 626
 627        ret = max8997_muic_detect_dev(info);
 628        if (ret < 0)
 629                dev_err(info->dev, "failed to detect cable type\n");
 630}
 631
 632static int max8997_muic_probe(struct platform_device *pdev)
 633{
 634        struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
 635        struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
 636        struct max8997_muic_info *info;
 637        int delay_jiffies;
 638        int cable_type;
 639        bool attached;
 640        int ret, i;
 641
 642        info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info),
 643                            GFP_KERNEL);
 644        if (!info)
 645                return -ENOMEM;
 646
 647        info->dev = &pdev->dev;
 648        info->muic = max8997->muic;
 649
 650        platform_set_drvdata(pdev, info);
 651        mutex_init(&info->mutex);
 652
 653        INIT_WORK(&info->irq_work, max8997_muic_irq_work);
 654        ret = devm_work_autocancel(&pdev->dev, &info->irq_work,
 655                                   max8997_muic_irq_work);
 656        if (ret)
 657                return ret;
 658
 659        for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
 660                struct max8997_muic_irq *muic_irq = &muic_irqs[i];
 661                unsigned int virq = 0;
 662
 663                virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq);
 664                if (!virq)
 665                        return -EINVAL;
 666
 667                muic_irq->virq = virq;
 668
 669                ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
 670                                                max8997_muic_irq_handler,
 671                                                IRQF_NO_SUSPEND,
 672                                                muic_irq->name, info);
 673                if (ret) {
 674                        dev_err(&pdev->dev,
 675                                "failed: irq request (IRQ: %d, error :%d)\n",
 676                                muic_irq->irq, ret);
 677                        return ret;
 678                }
 679        }
 680
 681        /* External connector */
 682        info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable);
 683        if (IS_ERR(info->edev)) {
 684                dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
 685                return PTR_ERR(info->edev);
 686        }
 687
 688        ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 689        if (ret) {
 690                dev_err(&pdev->dev, "failed to register extcon device\n");
 691                return ret;
 692        }
 693
 694        if (pdata && pdata->muic_pdata) {
 695                struct max8997_muic_platform_data *muic_pdata
 696                        = pdata->muic_pdata;
 697
 698                /* Initialize registers according to platform data */
 699                for (i = 0; i < muic_pdata->num_init_data; i++) {
 700                        max8997_write_reg(info->muic,
 701                                        muic_pdata->init_data[i].addr,
 702                                        muic_pdata->init_data[i].data);
 703                }
 704
 705                /*
 706                 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
 707                 * h/w path of COMP2/COMN1 on CONTROL1 register.
 708                 */
 709                if (muic_pdata->path_uart)
 710                        info->path_uart = muic_pdata->path_uart;
 711                else
 712                        info->path_uart = CONTROL1_SW_UART;
 713
 714                if (muic_pdata->path_usb)
 715                        info->path_usb = muic_pdata->path_usb;
 716                else
 717                        info->path_usb = CONTROL1_SW_USB;
 718
 719                /*
 720                 * Default delay time for detecting cable state
 721                 * after certain time.
 722                 */
 723                if (muic_pdata->detcable_delay_ms)
 724                        delay_jiffies =
 725                                msecs_to_jiffies(muic_pdata->detcable_delay_ms);
 726                else
 727                        delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 728        } else {
 729                info->path_uart = CONTROL1_SW_UART;
 730                info->path_usb = CONTROL1_SW_USB;
 731                delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 732        }
 733
 734        /* Set initial path for UART when JIG is connected to get serial logs */
 735        ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
 736                                2, info->status);
 737        if (ret) {
 738                dev_err(info->dev, "failed to read MUIC register\n");
 739                return ret;
 740        }
 741        cable_type = max8997_muic_get_cable_type(info,
 742                                           MAX8997_CABLE_GROUP_ADC, &attached);
 743        if (attached && cable_type == MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF)
 744                max8997_muic_set_path(info, info->path_uart, true);
 745
 746        /* Set ADC debounce time */
 747        max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
 748
 749        /*
 750         * Detect accessory after completing the initialization of platform
 751         *
 752         * - Use delayed workqueue to detect cable state and then
 753         * notify cable state to notifiee/platform through uevent.
 754         * After completing the booting of platform, the extcon provider
 755         * driver should notify cable state to upper layer.
 756         */
 757        INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
 758        queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
 759                        delay_jiffies);
 760
 761        return 0;
 762}
 763
 764static struct platform_driver max8997_muic_driver = {
 765        .driver         = {
 766                .name   = DEV_NAME,
 767        },
 768        .probe          = max8997_muic_probe,
 769};
 770
 771module_platform_driver(max8997_muic_driver);
 772
 773MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
 774MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 775MODULE_LICENSE("GPL");
 776MODULE_ALIAS("platform:max8997-muic");
 777