linux/drivers/firmware/stratix10-svc.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Copyright (C) 2017-2018, Intel Corporation
   4 */
   5
   6#include <linux/completion.h>
   7#include <linux/delay.h>
   8#include <linux/genalloc.h>
   9#include <linux/io.h>
  10#include <linux/kfifo.h>
  11#include <linux/kthread.h>
  12#include <linux/module.h>
  13#include <linux/mutex.h>
  14#include <linux/of.h>
  15#include <linux/of_platform.h>
  16#include <linux/platform_device.h>
  17#include <linux/slab.h>
  18#include <linux/spinlock.h>
  19#include <linux/firmware/intel/stratix10-smc.h>
  20#include <linux/firmware/intel/stratix10-svc-client.h>
  21#include <linux/types.h>
  22
  23/**
  24 * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO
  25 *
  26 * SVC_NUM_CHANNEL - number of channel supported by service layer driver
  27 *
  28 * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
  29 * from the secure world for FPGA manager to reuse, or to free the buffer(s)
  30 * when all bit-stream data had be send.
  31 *
  32 * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
  33 * service layer will return error to FPGA manager when timeout occurs,
  34 * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
  35 */
  36#define SVC_NUM_DATA_IN_FIFO                    32
  37#define SVC_NUM_CHANNEL                         2
  38#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS       200
  39#define FPGA_CONFIG_STATUS_TIMEOUT_SEC          30
  40
  41/* stratix10 service layer clients */
  42#define STRATIX10_RSU                           "stratix10-rsu"
  43
  44typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
  45                             unsigned long, unsigned long, unsigned long,
  46                             unsigned long, unsigned long,
  47                             struct arm_smccc_res *);
  48struct stratix10_svc_chan;
  49
  50/**
  51 * struct stratix10_svc - svc private data
  52 * @stratix10_svc_rsu: pointer to stratix10 RSU device
  53 */
  54struct stratix10_svc {
  55        struct platform_device *stratix10_svc_rsu;
  56};
  57
  58/**
  59 * struct stratix10_svc_sh_memory - service shared memory structure
  60 * @sync_complete: state for a completion
  61 * @addr: physical address of shared memory block
  62 * @size: size of shared memory block
  63 * @invoke_fn: function to issue secure monitor or hypervisor call
  64 *
  65 * This struct is used to save physical address and size of shared memory
  66 * block. The shared memory blocked is allocated by secure monitor software
  67 * at secure world.
  68 *
  69 * Service layer driver uses the physical address and size to create a memory
  70 * pool, then allocates data buffer from that memory pool for service client.
  71 */
  72struct stratix10_svc_sh_memory {
  73        struct completion sync_complete;
  74        unsigned long addr;
  75        unsigned long size;
  76        svc_invoke_fn *invoke_fn;
  77};
  78
  79/**
  80 * struct stratix10_svc_data_mem - service memory structure
  81 * @vaddr: virtual address
  82 * @paddr: physical address
  83 * @size: size of memory
  84 * @node: link list head node
  85 *
  86 * This struct is used in a list that keeps track of buffers which have
  87 * been allocated or freed from the memory pool. Service layer driver also
  88 * uses this struct to transfer physical address to virtual address.
  89 */
  90struct stratix10_svc_data_mem {
  91        void *vaddr;
  92        phys_addr_t paddr;
  93        size_t size;
  94        struct list_head node;
  95};
  96
  97/**
  98 * struct stratix10_svc_data - service data structure
  99 * @chan: service channel
 100 * @paddr: playload physical address
 101 * @size: playload size
 102 * @command: service command requested by client
 103 * @flag: configuration type (full or partial)
 104 * @arg: args to be passed via registers and not physically mapped buffers
 105 *
 106 * This struct is used in service FIFO for inter-process communication.
 107 */
 108struct stratix10_svc_data {
 109        struct stratix10_svc_chan *chan;
 110        phys_addr_t paddr;
 111        size_t size;
 112        u32 command;
 113        u32 flag;
 114        u64 arg[3];
 115};
 116
 117/**
 118 * struct stratix10_svc_controller - service controller
 119 * @dev: device
 120 * @chans: array of service channels
 121 * @num_chans: number of channels in 'chans' array
 122 * @num_active_client: number of active service client
 123 * @node: list management
 124 * @genpool: memory pool pointing to the memory region
 125 * @task: pointer to the thread task which handles SMC or HVC call
 126 * @svc_fifo: a queue for storing service message data
 127 * @complete_status: state for completion
 128 * @svc_fifo_lock: protect access to service message data queue
 129 * @invoke_fn: function to issue secure monitor call or hypervisor call
 130 *
 131 * This struct is used to create communication channels for service clients, to
 132 * handle secure monitor or hypervisor call.
 133 */
 134struct stratix10_svc_controller {
 135        struct device *dev;
 136        struct stratix10_svc_chan *chans;
 137        int num_chans;
 138        int num_active_client;
 139        struct list_head node;
 140        struct gen_pool *genpool;
 141        struct task_struct *task;
 142        struct kfifo svc_fifo;
 143        struct completion complete_status;
 144        spinlock_t svc_fifo_lock;
 145        svc_invoke_fn *invoke_fn;
 146};
 147
 148/**
 149 * struct stratix10_svc_chan - service communication channel
 150 * @ctrl: pointer to service controller which is the provider of this channel
 151 * @scl: pointer to service client which owns the channel
 152 * @name: service client name associated with the channel
 153 * @lock: protect access to the channel
 154 *
 155 * This struct is used by service client to communicate with service layer, each
 156 * service client has its own channel created by service controller.
 157 */
 158struct stratix10_svc_chan {
 159        struct stratix10_svc_controller *ctrl;
 160        struct stratix10_svc_client *scl;
 161        char *name;
 162        spinlock_t lock;
 163};
 164
 165static LIST_HEAD(svc_ctrl);
 166static LIST_HEAD(svc_data_mem);
 167
 168/**
 169 * svc_pa_to_va() - translate physical address to virtual address
 170 * @addr: to be translated physical address
 171 *
 172 * Return: valid virtual address or NULL if the provided physical
 173 * address doesn't exist.
 174 */
 175static void *svc_pa_to_va(unsigned long addr)
 176{
 177        struct stratix10_svc_data_mem *pmem;
 178
 179        pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
 180        list_for_each_entry(pmem, &svc_data_mem, node)
 181                if (pmem->paddr == addr)
 182                        return pmem->vaddr;
 183
 184        /* physical address is not found */
 185        return NULL;
 186}
 187
 188/**
 189 * svc_thread_cmd_data_claim() - claim back buffer from the secure world
 190 * @ctrl: pointer to service layer controller
 191 * @p_data: pointer to service data structure
 192 * @cb_data: pointer to callback data structure to service client
 193 *
 194 * Claim back the submitted buffers from the secure world and pass buffer
 195 * back to service client (FPGA manager, etc) for reuse.
 196 */
 197static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl,
 198                                      struct stratix10_svc_data *p_data,
 199                                      struct stratix10_svc_cb_data *cb_data)
 200{
 201        struct arm_smccc_res res;
 202        unsigned long timeout;
 203
 204        reinit_completion(&ctrl->complete_status);
 205        timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
 206
 207        pr_debug("%s: claim back the submitted buffer\n", __func__);
 208        do {
 209                ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
 210                                0, 0, 0, 0, 0, 0, 0, &res);
 211
 212                if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
 213                        if (!res.a1) {
 214                                complete(&ctrl->complete_status);
 215                                break;
 216                        }
 217                        cb_data->status = BIT(SVC_STATUS_BUFFER_DONE);
 218                        cb_data->kaddr1 = svc_pa_to_va(res.a1);
 219                        cb_data->kaddr2 = (res.a2) ?
 220                                          svc_pa_to_va(res.a2) : NULL;
 221                        cb_data->kaddr3 = (res.a3) ?
 222                                          svc_pa_to_va(res.a3) : NULL;
 223                        p_data->chan->scl->receive_cb(p_data->chan->scl,
 224                                                      cb_data);
 225                } else {
 226                        pr_debug("%s: secure world busy, polling again\n",
 227                                 __func__);
 228                }
 229        } while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
 230                 res.a0 == INTEL_SIP_SMC_STATUS_BUSY ||
 231                 wait_for_completion_timeout(&ctrl->complete_status, timeout));
 232}
 233
 234/**
 235 * svc_thread_cmd_config_status() - check configuration status
 236 * @ctrl: pointer to service layer controller
 237 * @p_data: pointer to service data structure
 238 * @cb_data: pointer to callback data structure to service client
 239 *
 240 * Check whether the secure firmware at secure world has finished the FPGA
 241 * configuration, and then inform FPGA manager the configuration status.
 242 */
 243static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
 244                                         struct stratix10_svc_data *p_data,
 245                                         struct stratix10_svc_cb_data *cb_data)
 246{
 247        struct arm_smccc_res res;
 248        int count_in_sec;
 249
 250        cb_data->kaddr1 = NULL;
 251        cb_data->kaddr2 = NULL;
 252        cb_data->kaddr3 = NULL;
 253        cb_data->status = BIT(SVC_STATUS_ERROR);
 254
 255        pr_debug("%s: polling config status\n", __func__);
 256
 257        count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
 258        while (count_in_sec) {
 259                ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
 260                                0, 0, 0, 0, 0, 0, 0, &res);
 261                if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
 262                    (res.a0 == INTEL_SIP_SMC_STATUS_ERROR))
 263                        break;
 264
 265                /*
 266                 * configuration is still in progress, wait one second then
 267                 * poll again
 268                 */
 269                msleep(1000);
 270                count_in_sec--;
 271        }
 272
 273        if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
 274                cb_data->status = BIT(SVC_STATUS_COMPLETED);
 275
 276        p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
 277}
 278
 279/**
 280 * svc_thread_recv_status_ok() - handle the successful status
 281 * @p_data: pointer to service data structure
 282 * @cb_data: pointer to callback data structure to service client
 283 * @res: result from SMC or HVC call
 284 *
 285 * Send back the correspond status to the service clients.
 286 */
 287static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
 288                                      struct stratix10_svc_cb_data *cb_data,
 289                                      struct arm_smccc_res res)
 290{
 291        cb_data->kaddr1 = NULL;
 292        cb_data->kaddr2 = NULL;
 293        cb_data->kaddr3 = NULL;
 294
 295        switch (p_data->command) {
 296        case COMMAND_RECONFIG:
 297        case COMMAND_RSU_UPDATE:
 298        case COMMAND_RSU_NOTIFY:
 299                cb_data->status = BIT(SVC_STATUS_OK);
 300                break;
 301        case COMMAND_RECONFIG_DATA_SUBMIT:
 302                cb_data->status = BIT(SVC_STATUS_BUFFER_SUBMITTED);
 303                break;
 304        case COMMAND_RECONFIG_STATUS:
 305                cb_data->status = BIT(SVC_STATUS_COMPLETED);
 306                break;
 307        case COMMAND_RSU_RETRY:
 308        case COMMAND_RSU_MAX_RETRY:
 309                cb_data->status = BIT(SVC_STATUS_OK);
 310                cb_data->kaddr1 = &res.a1;
 311                break;
 312        case COMMAND_RSU_DCMF_VERSION:
 313                cb_data->status = BIT(SVC_STATUS_OK);
 314                cb_data->kaddr1 = &res.a1;
 315                cb_data->kaddr2 = &res.a2;
 316                break;
 317        default:
 318                pr_warn("it shouldn't happen\n");
 319                break;
 320        }
 321
 322        pr_debug("%s: call receive_cb\n", __func__);
 323        p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
 324}
 325
 326/**
 327 * svc_normal_to_secure_thread() - the function to run in the kthread
 328 * @data: data pointer for kthread function
 329 *
 330 * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU
 331 * node 0, its function stratix10_svc_secure_call_thread is used to handle
 332 * SMC or HVC calls between kernel driver and secure monitor software.
 333 *
 334 * Return: 0 for success or -ENOMEM on error.
 335 */
 336static int svc_normal_to_secure_thread(void *data)
 337{
 338        struct stratix10_svc_controller
 339                        *ctrl = (struct stratix10_svc_controller *)data;
 340        struct stratix10_svc_data *pdata;
 341        struct stratix10_svc_cb_data *cbdata;
 342        struct arm_smccc_res res;
 343        unsigned long a0, a1, a2;
 344        int ret_fifo = 0;
 345
 346        pdata =  kmalloc(sizeof(*pdata), GFP_KERNEL);
 347        if (!pdata)
 348                return -ENOMEM;
 349
 350        cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
 351        if (!cbdata) {
 352                kfree(pdata);
 353                return -ENOMEM;
 354        }
 355
 356        /* default set, to remove build warning */
 357        a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
 358        a1 = 0;
 359        a2 = 0;
 360
 361        pr_debug("smc_hvc_shm_thread is running\n");
 362
 363        while (!kthread_should_stop()) {
 364                ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
 365                                                pdata, sizeof(*pdata),
 366                                                &ctrl->svc_fifo_lock);
 367
 368                if (!ret_fifo)
 369                        continue;
 370
 371                pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
 372                         (unsigned int)pdata->paddr, pdata->command,
 373                         (unsigned int)pdata->size);
 374
 375                switch (pdata->command) {
 376                case COMMAND_RECONFIG_DATA_CLAIM:
 377                        svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
 378                        continue;
 379                case COMMAND_RECONFIG:
 380                        a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
 381                        pr_debug("conf_type=%u\n", (unsigned int)pdata->flag);
 382                        a1 = pdata->flag;
 383                        a2 = 0;
 384                        break;
 385                case COMMAND_RECONFIG_DATA_SUBMIT:
 386                        a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
 387                        a1 = (unsigned long)pdata->paddr;
 388                        a2 = (unsigned long)pdata->size;
 389                        break;
 390                case COMMAND_RECONFIG_STATUS:
 391                        a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
 392                        a1 = 0;
 393                        a2 = 0;
 394                        break;
 395                case COMMAND_RSU_STATUS:
 396                        a0 = INTEL_SIP_SMC_RSU_STATUS;
 397                        a1 = 0;
 398                        a2 = 0;
 399                        break;
 400                case COMMAND_RSU_UPDATE:
 401                        a0 = INTEL_SIP_SMC_RSU_UPDATE;
 402                        a1 = pdata->arg[0];
 403                        a2 = 0;
 404                        break;
 405                case COMMAND_RSU_NOTIFY:
 406                        a0 = INTEL_SIP_SMC_RSU_NOTIFY;
 407                        a1 = pdata->arg[0];
 408                        a2 = 0;
 409                        break;
 410                case COMMAND_RSU_RETRY:
 411                        a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER;
 412                        a1 = 0;
 413                        a2 = 0;
 414                        break;
 415                case COMMAND_RSU_MAX_RETRY:
 416                        a0 = INTEL_SIP_SMC_RSU_MAX_RETRY;
 417                        a1 = 0;
 418                        a2 = 0;
 419                        break;
 420                case COMMAND_RSU_DCMF_VERSION:
 421                        a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION;
 422                        a1 = 0;
 423                        a2 = 0;
 424                        break;
 425                default:
 426                        pr_warn("it shouldn't happen\n");
 427                        break;
 428                }
 429                pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
 430                         __func__, (unsigned int)a0, (unsigned int)a1);
 431                pr_debug(" a2=0x%016x\n", (unsigned int)a2);
 432
 433                ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
 434
 435                pr_debug("%s: after SMC call -- res.a0=0x%016x",
 436                         __func__, (unsigned int)res.a0);
 437                pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
 438                         (unsigned int)res.a1, (unsigned int)res.a2);
 439                pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
 440
 441                if (pdata->command == COMMAND_RSU_STATUS) {
 442                        if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
 443                                cbdata->status = BIT(SVC_STATUS_ERROR);
 444                        else
 445                                cbdata->status = BIT(SVC_STATUS_OK);
 446
 447                        cbdata->kaddr1 = &res;
 448                        cbdata->kaddr2 = NULL;
 449                        cbdata->kaddr3 = NULL;
 450                        pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
 451                        continue;
 452                }
 453
 454                switch (res.a0) {
 455                case INTEL_SIP_SMC_STATUS_OK:
 456                        svc_thread_recv_status_ok(pdata, cbdata, res);
 457                        break;
 458                case INTEL_SIP_SMC_STATUS_BUSY:
 459                        switch (pdata->command) {
 460                        case COMMAND_RECONFIG_DATA_SUBMIT:
 461                                svc_thread_cmd_data_claim(ctrl,
 462                                                          pdata, cbdata);
 463                                break;
 464                        case COMMAND_RECONFIG_STATUS:
 465                                svc_thread_cmd_config_status(ctrl,
 466                                                             pdata, cbdata);
 467                                break;
 468                        default:
 469                                pr_warn("it shouldn't happen\n");
 470                                break;
 471                        }
 472                        break;
 473                case INTEL_SIP_SMC_STATUS_REJECTED:
 474                        pr_debug("%s: STATUS_REJECTED\n", __func__);
 475                        break;
 476                case INTEL_SIP_SMC_STATUS_ERROR:
 477                case INTEL_SIP_SMC_RSU_ERROR:
 478                        pr_err("%s: STATUS_ERROR\n", __func__);
 479                        cbdata->status = BIT(SVC_STATUS_ERROR);
 480                        cbdata->kaddr1 = NULL;
 481                        cbdata->kaddr2 = NULL;
 482                        cbdata->kaddr3 = NULL;
 483                        pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
 484                        break;
 485                default:
 486                        pr_warn("Secure firmware doesn't support...\n");
 487
 488                        /*
 489                         * be compatible with older version firmware which
 490                         * doesn't support RSU notify or retry
 491                         */
 492                        if ((pdata->command == COMMAND_RSU_RETRY) ||
 493                            (pdata->command == COMMAND_RSU_MAX_RETRY) ||
 494                                (pdata->command == COMMAND_RSU_NOTIFY)) {
 495                                cbdata->status =
 496                                        BIT(SVC_STATUS_NO_SUPPORT);
 497                                cbdata->kaddr1 = NULL;
 498                                cbdata->kaddr2 = NULL;
 499                                cbdata->kaddr3 = NULL;
 500                                pdata->chan->scl->receive_cb(
 501                                        pdata->chan->scl, cbdata);
 502                        }
 503                        break;
 504
 505                }
 506        }
 507
 508        kfree(cbdata);
 509        kfree(pdata);
 510
 511        return 0;
 512}
 513
 514/**
 515 * svc_normal_to_secure_shm_thread() - the function to run in the kthread
 516 * @data: data pointer for kthread function
 517 *
 518 * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU
 519 * node 0, its function stratix10_svc_secure_shm_thread is used to query the
 520 * physical address of memory block reserved by secure monitor software at
 521 * secure world.
 522 *
 523 * svc_normal_to_secure_shm_thread() calls do_exit() directly since it is a
 524 * standlone thread for which no one will call kthread_stop() or return when
 525 * 'kthread_should_stop()' is true.
 526 */
 527static int svc_normal_to_secure_shm_thread(void *data)
 528{
 529        struct stratix10_svc_sh_memory
 530                        *sh_mem = (struct stratix10_svc_sh_memory *)data;
 531        struct arm_smccc_res res;
 532
 533        /* SMC or HVC call to get shared memory info from secure world */
 534        sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
 535                          0, 0, 0, 0, 0, 0, 0, &res);
 536        if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
 537                sh_mem->addr = res.a1;
 538                sh_mem->size = res.a2;
 539        } else {
 540                pr_err("%s: after SMC call -- res.a0=0x%016x",  __func__,
 541                       (unsigned int)res.a0);
 542                sh_mem->addr = 0;
 543                sh_mem->size = 0;
 544        }
 545
 546        complete(&sh_mem->sync_complete);
 547        do_exit(0);
 548}
 549
 550/**
 551 * svc_get_sh_memory() - get memory block reserved by secure monitor SW
 552 * @pdev: pointer to service layer device
 553 * @sh_memory: pointer to service shared memory structure
 554 *
 555 * Return: zero for successfully getting the physical address of memory block
 556 * reserved by secure monitor software, or negative value on error.
 557 */
 558static int svc_get_sh_memory(struct platform_device *pdev,
 559                                    struct stratix10_svc_sh_memory *sh_memory)
 560{
 561        struct device *dev = &pdev->dev;
 562        struct task_struct *sh_memory_task;
 563        unsigned int cpu = 0;
 564
 565        init_completion(&sh_memory->sync_complete);
 566
 567        /* smc or hvc call happens on cpu 0 bound kthread */
 568        sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread,
 569                                               (void *)sh_memory,
 570                                                cpu_to_node(cpu),
 571                                                "svc_smc_hvc_shm_thread");
 572        if (IS_ERR(sh_memory_task)) {
 573                dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n");
 574                return -EINVAL;
 575        }
 576
 577        wake_up_process(sh_memory_task);
 578
 579        if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
 580                dev_err(dev,
 581                        "timeout to get sh-memory paras from secure world\n");
 582                return -ETIMEDOUT;
 583        }
 584
 585        if (!sh_memory->addr || !sh_memory->size) {
 586                dev_err(dev,
 587                        "failed to get shared memory info from secure world\n");
 588                return -ENOMEM;
 589        }
 590
 591        dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
 592                (unsigned int)sh_memory->addr,
 593                (unsigned int)sh_memory->size);
 594
 595        return 0;
 596}
 597
 598/**
 599 * svc_create_memory_pool() - create a memory pool from reserved memory block
 600 * @pdev: pointer to service layer device
 601 * @sh_memory: pointer to service shared memory structure
 602 *
 603 * Return: pool allocated from reserved memory block or ERR_PTR() on error.
 604 */
 605static struct gen_pool *
 606svc_create_memory_pool(struct platform_device *pdev,
 607                       struct stratix10_svc_sh_memory *sh_memory)
 608{
 609        struct device *dev = &pdev->dev;
 610        struct gen_pool *genpool;
 611        unsigned long vaddr;
 612        phys_addr_t paddr;
 613        size_t size;
 614        phys_addr_t begin;
 615        phys_addr_t end;
 616        void *va;
 617        size_t page_mask = PAGE_SIZE - 1;
 618        int min_alloc_order = 3;
 619        int ret;
 620
 621        begin = roundup(sh_memory->addr, PAGE_SIZE);
 622        end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
 623        paddr = begin;
 624        size = end - begin;
 625        va = memremap(paddr, size, MEMREMAP_WC);
 626        if (!va) {
 627                dev_err(dev, "fail to remap shared memory\n");
 628                return ERR_PTR(-EINVAL);
 629        }
 630        vaddr = (unsigned long)va;
 631        dev_dbg(dev,
 632                "reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
 633                va, (unsigned int)paddr, (unsigned int)size);
 634        if ((vaddr & page_mask) || (paddr & page_mask) ||
 635            (size & page_mask)) {
 636                dev_err(dev, "page is not aligned\n");
 637                return ERR_PTR(-EINVAL);
 638        }
 639        genpool = gen_pool_create(min_alloc_order, -1);
 640        if (!genpool) {
 641                dev_err(dev, "fail to create genpool\n");
 642                return ERR_PTR(-ENOMEM);
 643        }
 644        gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
 645        ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
 646        if (ret) {
 647                dev_err(dev, "fail to add memory chunk to the pool\n");
 648                gen_pool_destroy(genpool);
 649                return ERR_PTR(ret);
 650        }
 651
 652        return genpool;
 653}
 654
 655/**
 656 * svc_smccc_smc() - secure monitor call between normal and secure world
 657 * @a0: argument passed in registers 0
 658 * @a1: argument passed in registers 1
 659 * @a2: argument passed in registers 2
 660 * @a3: argument passed in registers 3
 661 * @a4: argument passed in registers 4
 662 * @a5: argument passed in registers 5
 663 * @a6: argument passed in registers 6
 664 * @a7: argument passed in registers 7
 665 * @res: result values from register 0 to 3
 666 */
 667static void svc_smccc_smc(unsigned long a0, unsigned long a1,
 668                          unsigned long a2, unsigned long a3,
 669                          unsigned long a4, unsigned long a5,
 670                          unsigned long a6, unsigned long a7,
 671                          struct arm_smccc_res *res)
 672{
 673        arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
 674}
 675
 676/**
 677 * svc_smccc_hvc() - hypervisor call between normal and secure world
 678 * @a0: argument passed in registers 0
 679 * @a1: argument passed in registers 1
 680 * @a2: argument passed in registers 2
 681 * @a3: argument passed in registers 3
 682 * @a4: argument passed in registers 4
 683 * @a5: argument passed in registers 5
 684 * @a6: argument passed in registers 6
 685 * @a7: argument passed in registers 7
 686 * @res: result values from register 0 to 3
 687 */
 688static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
 689                          unsigned long a2, unsigned long a3,
 690                          unsigned long a4, unsigned long a5,
 691                          unsigned long a6, unsigned long a7,
 692                          struct arm_smccc_res *res)
 693{
 694        arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
 695}
 696
 697/**
 698 * get_invoke_func() - invoke SMC or HVC call
 699 * @dev: pointer to device
 700 *
 701 * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
 702 */
 703static svc_invoke_fn *get_invoke_func(struct device *dev)
 704{
 705        const char *method;
 706
 707        if (of_property_read_string(dev->of_node, "method", &method)) {
 708                dev_warn(dev, "missing \"method\" property\n");
 709                return ERR_PTR(-ENXIO);
 710        }
 711
 712        if (!strcmp(method, "smc"))
 713                return svc_smccc_smc;
 714        if (!strcmp(method, "hvc"))
 715                return svc_smccc_hvc;
 716
 717        dev_warn(dev, "invalid \"method\" property: %s\n", method);
 718
 719        return ERR_PTR(-EINVAL);
 720}
 721
 722/**
 723 * stratix10_svc_request_channel_byname() - request a service channel
 724 * @client: pointer to service client
 725 * @name: service client name
 726 *
 727 * This function is used by service client to request a service channel.
 728 *
 729 * Return: a pointer to channel assigned to the client on success,
 730 * or ERR_PTR() on error.
 731 */
 732struct stratix10_svc_chan *stratix10_svc_request_channel_byname(
 733        struct stratix10_svc_client *client, const char *name)
 734{
 735        struct device *dev = client->dev;
 736        struct stratix10_svc_controller *controller;
 737        struct stratix10_svc_chan *chan = NULL;
 738        unsigned long flag;
 739        int i;
 740
 741        /* if probe was called after client's, or error on probe */
 742        if (list_empty(&svc_ctrl))
 743                return ERR_PTR(-EPROBE_DEFER);
 744
 745        controller = list_first_entry(&svc_ctrl,
 746                                      struct stratix10_svc_controller, node);
 747        for (i = 0; i < SVC_NUM_CHANNEL; i++) {
 748                if (!strcmp(controller->chans[i].name, name)) {
 749                        chan = &controller->chans[i];
 750                        break;
 751                }
 752        }
 753
 754        /* if there was no channel match */
 755        if (i == SVC_NUM_CHANNEL) {
 756                dev_err(dev, "%s: channel not allocated\n", __func__);
 757                return ERR_PTR(-EINVAL);
 758        }
 759
 760        if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
 761                dev_dbg(dev, "%s: svc not free\n", __func__);
 762                return ERR_PTR(-EBUSY);
 763        }
 764
 765        spin_lock_irqsave(&chan->lock, flag);
 766        chan->scl = client;
 767        chan->ctrl->num_active_client++;
 768        spin_unlock_irqrestore(&chan->lock, flag);
 769
 770        return chan;
 771}
 772EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname);
 773
 774/**
 775 * stratix10_svc_free_channel() - free service channel
 776 * @chan: service channel to be freed
 777 *
 778 * This function is used by service client to free a service channel.
 779 */
 780void stratix10_svc_free_channel(struct stratix10_svc_chan *chan)
 781{
 782        unsigned long flag;
 783
 784        spin_lock_irqsave(&chan->lock, flag);
 785        chan->scl = NULL;
 786        chan->ctrl->num_active_client--;
 787        module_put(chan->ctrl->dev->driver->owner);
 788        spin_unlock_irqrestore(&chan->lock, flag);
 789}
 790EXPORT_SYMBOL_GPL(stratix10_svc_free_channel);
 791
 792/**
 793 * stratix10_svc_send() - send a message data to the remote
 794 * @chan: service channel assigned to the client
 795 * @msg: message data to be sent, in the format of
 796 * "struct stratix10_svc_client_msg"
 797 *
 798 * This function is used by service client to add a message to the service
 799 * layer driver's queue for being sent to the secure world.
 800 *
 801 * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
 802 */
 803int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
 804{
 805        struct stratix10_svc_client_msg
 806                *p_msg = (struct stratix10_svc_client_msg *)msg;
 807        struct stratix10_svc_data_mem *p_mem;
 808        struct stratix10_svc_data *p_data;
 809        int ret = 0;
 810        unsigned int cpu = 0;
 811
 812        p_data = kzalloc(sizeof(*p_data), GFP_KERNEL);
 813        if (!p_data)
 814                return -ENOMEM;
 815
 816        /* first client will create kernel thread */
 817        if (!chan->ctrl->task) {
 818                chan->ctrl->task =
 819                        kthread_create_on_node(svc_normal_to_secure_thread,
 820                                              (void *)chan->ctrl,
 821                                              cpu_to_node(cpu),
 822                                              "svc_smc_hvc_thread");
 823                        if (IS_ERR(chan->ctrl->task)) {
 824                                dev_err(chan->ctrl->dev,
 825                                        "failed to create svc_smc_hvc_thread\n");
 826                                kfree(p_data);
 827                                return -EINVAL;
 828                        }
 829                kthread_bind(chan->ctrl->task, cpu);
 830                wake_up_process(chan->ctrl->task);
 831        }
 832
 833        pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
 834                 p_msg->payload, p_msg->command,
 835                 (unsigned int)p_msg->payload_length);
 836
 837        if (list_empty(&svc_data_mem)) {
 838                if (p_msg->command == COMMAND_RECONFIG) {
 839                        struct stratix10_svc_command_config_type *ct =
 840                                (struct stratix10_svc_command_config_type *)
 841                                p_msg->payload;
 842                        p_data->flag = ct->flags;
 843                }
 844        } else {
 845                list_for_each_entry(p_mem, &svc_data_mem, node)
 846                        if (p_mem->vaddr == p_msg->payload) {
 847                                p_data->paddr = p_mem->paddr;
 848                                break;
 849                        }
 850        }
 851
 852        p_data->command = p_msg->command;
 853        p_data->arg[0] = p_msg->arg[0];
 854        p_data->arg[1] = p_msg->arg[1];
 855        p_data->arg[2] = p_msg->arg[2];
 856        p_data->size = p_msg->payload_length;
 857        p_data->chan = chan;
 858        pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
 859               (unsigned int)p_data->paddr, p_data->command,
 860               (unsigned int)p_data->size);
 861        ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
 862                                  sizeof(*p_data),
 863                                  &chan->ctrl->svc_fifo_lock);
 864
 865        kfree(p_data);
 866
 867        if (!ret)
 868                return -ENOBUFS;
 869
 870        return 0;
 871}
 872EXPORT_SYMBOL_GPL(stratix10_svc_send);
 873
 874/**
 875 * stratix10_svc_done() - complete service request transactions
 876 * @chan: service channel assigned to the client
 877 *
 878 * This function should be called when client has finished its request
 879 * or there is an error in the request process. It allows the service layer
 880 * to stop the running thread to have maximize savings in kernel resources.
 881 */
 882void stratix10_svc_done(struct stratix10_svc_chan *chan)
 883{
 884        /* stop thread when thread is running AND only one active client */
 885        if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) {
 886                pr_debug("svc_smc_hvc_shm_thread is stopped\n");
 887                kthread_stop(chan->ctrl->task);
 888                chan->ctrl->task = NULL;
 889        }
 890}
 891EXPORT_SYMBOL_GPL(stratix10_svc_done);
 892
 893/**
 894 * stratix10_svc_allocate_memory() - allocate memory
 895 * @chan: service channel assigned to the client
 896 * @size: memory size requested by a specific service client
 897 *
 898 * Service layer allocates the requested number of bytes buffer from the
 899 * memory pool, service client uses this function to get allocated buffers.
 900 *
 901 * Return: address of allocated memory on success, or ERR_PTR() on error.
 902 */
 903void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
 904                                    size_t size)
 905{
 906        struct stratix10_svc_data_mem *pmem;
 907        unsigned long va;
 908        phys_addr_t pa;
 909        struct gen_pool *genpool = chan->ctrl->genpool;
 910        size_t s = roundup(size, 1 << genpool->min_alloc_order);
 911
 912        pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
 913        if (!pmem)
 914                return ERR_PTR(-ENOMEM);
 915
 916        va = gen_pool_alloc(genpool, s);
 917        if (!va)
 918                return ERR_PTR(-ENOMEM);
 919
 920        memset((void *)va, 0, s);
 921        pa = gen_pool_virt_to_phys(genpool, va);
 922
 923        pmem->vaddr = (void *)va;
 924        pmem->paddr = pa;
 925        pmem->size = s;
 926        list_add_tail(&pmem->node, &svc_data_mem);
 927        pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
 928                 pmem->vaddr, (unsigned int)pmem->paddr);
 929
 930        return (void *)va;
 931}
 932EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
 933
 934/**
 935 * stratix10_svc_free_memory() - free allocated memory
 936 * @chan: service channel assigned to the client
 937 * @kaddr: memory to be freed
 938 *
 939 * This function is used by service client to free allocated buffers.
 940 */
 941void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
 942{
 943        struct stratix10_svc_data_mem *pmem;
 944        size_t size = 0;
 945
 946        list_for_each_entry(pmem, &svc_data_mem, node)
 947                if (pmem->vaddr == kaddr) {
 948                        size = pmem->size;
 949                        break;
 950                }
 951
 952        gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
 953        pmem->vaddr = NULL;
 954        list_del(&pmem->node);
 955}
 956EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
 957
 958static const struct of_device_id stratix10_svc_drv_match[] = {
 959        {.compatible = "intel,stratix10-svc"},
 960        {.compatible = "intel,agilex-svc"},
 961        {},
 962};
 963
 964static int stratix10_svc_drv_probe(struct platform_device *pdev)
 965{
 966        struct device *dev = &pdev->dev;
 967        struct stratix10_svc_controller *controller;
 968        struct stratix10_svc_chan *chans;
 969        struct gen_pool *genpool;
 970        struct stratix10_svc_sh_memory *sh_memory;
 971        struct stratix10_svc *svc;
 972
 973        svc_invoke_fn *invoke_fn;
 974        size_t fifo_size;
 975        int ret;
 976
 977        /* get SMC or HVC function */
 978        invoke_fn = get_invoke_func(dev);
 979        if (IS_ERR(invoke_fn))
 980                return -EINVAL;
 981
 982        sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
 983        if (!sh_memory)
 984                return -ENOMEM;
 985
 986        sh_memory->invoke_fn = invoke_fn;
 987        ret = svc_get_sh_memory(pdev, sh_memory);
 988        if (ret)
 989                return ret;
 990
 991        genpool = svc_create_memory_pool(pdev, sh_memory);
 992        if (!genpool)
 993                return -ENOMEM;
 994
 995        /* allocate service controller and supporting channel */
 996        controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
 997        if (!controller)
 998                return -ENOMEM;
 999
1000        chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
1001                                   sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
1002        if (!chans)
1003                return -ENOMEM;
1004
1005        controller->dev = dev;
1006        controller->num_chans = SVC_NUM_CHANNEL;
1007        controller->num_active_client = 0;
1008        controller->chans = chans;
1009        controller->genpool = genpool;
1010        controller->task = NULL;
1011        controller->invoke_fn = invoke_fn;
1012        init_completion(&controller->complete_status);
1013
1014        fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
1015        ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
1016        if (ret) {
1017                dev_err(dev, "failed to allocate FIFO\n");
1018                return ret;
1019        }
1020        spin_lock_init(&controller->svc_fifo_lock);
1021
1022        chans[0].scl = NULL;
1023        chans[0].ctrl = controller;
1024        chans[0].name = SVC_CLIENT_FPGA;
1025        spin_lock_init(&chans[0].lock);
1026
1027        chans[1].scl = NULL;
1028        chans[1].ctrl = controller;
1029        chans[1].name = SVC_CLIENT_RSU;
1030        spin_lock_init(&chans[1].lock);
1031
1032        list_add_tail(&controller->node, &svc_ctrl);
1033        platform_set_drvdata(pdev, controller);
1034
1035        /* add svc client device(s) */
1036        svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
1037        if (!svc) {
1038                ret = -ENOMEM;
1039                goto err_free_kfifo;
1040        }
1041
1042        svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
1043        if (!svc->stratix10_svc_rsu) {
1044                dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
1045                ret = -ENOMEM;
1046                goto err_free_kfifo;
1047        }
1048
1049        ret = platform_device_add(svc->stratix10_svc_rsu);
1050        if (ret)
1051                goto err_put_device;
1052
1053        dev_set_drvdata(dev, svc);
1054
1055        pr_info("Intel Service Layer Driver Initialized\n");
1056
1057        return 0;
1058
1059err_put_device:
1060        platform_device_put(svc->stratix10_svc_rsu);
1061err_free_kfifo:
1062        kfifo_free(&controller->svc_fifo);
1063        return ret;
1064}
1065
1066static int stratix10_svc_drv_remove(struct platform_device *pdev)
1067{
1068        struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev);
1069        struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
1070
1071        platform_device_unregister(svc->stratix10_svc_rsu);
1072
1073        kfifo_free(&ctrl->svc_fifo);
1074        if (ctrl->task) {
1075                kthread_stop(ctrl->task);
1076                ctrl->task = NULL;
1077        }
1078        if (ctrl->genpool)
1079                gen_pool_destroy(ctrl->genpool);
1080        list_del(&ctrl->node);
1081
1082        return 0;
1083}
1084
1085static struct platform_driver stratix10_svc_driver = {
1086        .probe = stratix10_svc_drv_probe,
1087        .remove = stratix10_svc_drv_remove,
1088        .driver = {
1089                .name = "stratix10-svc",
1090                .of_match_table = stratix10_svc_drv_match,
1091        },
1092};
1093
1094static int __init stratix10_svc_init(void)
1095{
1096        struct device_node *fw_np;
1097        struct device_node *np;
1098        int ret;
1099
1100        fw_np = of_find_node_by_name(NULL, "firmware");
1101        if (!fw_np)
1102                return -ENODEV;
1103
1104        np = of_find_matching_node(fw_np, stratix10_svc_drv_match);
1105        if (!np)
1106                return -ENODEV;
1107
1108        of_node_put(np);
1109        ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL);
1110        if (ret)
1111                return ret;
1112
1113        return platform_driver_register(&stratix10_svc_driver);
1114}
1115
1116static void __exit stratix10_svc_exit(void)
1117{
1118        return platform_driver_unregister(&stratix10_svc_driver);
1119}
1120
1121subsys_initcall(stratix10_svc_init);
1122module_exit(stratix10_svc_exit);
1123
1124MODULE_LICENSE("GPL v2");
1125MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
1126MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
1127MODULE_ALIAS("platform:stratix10-svc");
1128