linux/drivers/gpu/drm/omapdrm/omap_encoder.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
   4 * Author: Rob Clark <rob@ti.com>
   5 */
   6
   7#include <linux/list.h>
   8
   9#include <drm/drm_bridge.h>
  10#include <drm/drm_crtc.h>
  11#include <drm/drm_modeset_helper_vtables.h>
  12#include <drm/drm_edid.h>
  13
  14#include "omap_drv.h"
  15
  16/*
  17 * encoder funcs
  18 */
  19
  20#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
  21
  22/* The encoder and connector both map to same dssdev.. the encoder
  23 * handles the 'active' parts, ie. anything the modifies the state
  24 * of the hw, and the connector handles the 'read-only' parts, like
  25 * detecting connection and reading edid.
  26 */
  27struct omap_encoder {
  28        struct drm_encoder base;
  29        struct omap_dss_device *output;
  30};
  31
  32static void omap_encoder_destroy(struct drm_encoder *encoder)
  33{
  34        struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
  35
  36        drm_encoder_cleanup(encoder);
  37        kfree(omap_encoder);
  38}
  39
  40static const struct drm_encoder_funcs omap_encoder_funcs = {
  41        .destroy = omap_encoder_destroy,
  42};
  43
  44static void omap_encoder_update_videomode_flags(struct videomode *vm,
  45                                                u32 bus_flags)
  46{
  47        if (!(vm->flags & (DISPLAY_FLAGS_DE_LOW |
  48                           DISPLAY_FLAGS_DE_HIGH))) {
  49                if (bus_flags & DRM_BUS_FLAG_DE_LOW)
  50                        vm->flags |= DISPLAY_FLAGS_DE_LOW;
  51                else if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
  52                        vm->flags |= DISPLAY_FLAGS_DE_HIGH;
  53        }
  54
  55        if (!(vm->flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE |
  56                           DISPLAY_FLAGS_PIXDATA_NEGEDGE))) {
  57                if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
  58                        vm->flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
  59                else if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
  60                        vm->flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
  61        }
  62
  63        if (!(vm->flags & (DISPLAY_FLAGS_SYNC_POSEDGE |
  64                           DISPLAY_FLAGS_SYNC_NEGEDGE))) {
  65                if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE)
  66                        vm->flags |= DISPLAY_FLAGS_SYNC_POSEDGE;
  67                else if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
  68                        vm->flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
  69        }
  70}
  71
  72static void omap_encoder_mode_set(struct drm_encoder *encoder,
  73                                  struct drm_display_mode *mode,
  74                                  struct drm_display_mode *adjusted_mode)
  75{
  76        struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
  77        struct omap_dss_device *output = omap_encoder->output;
  78        struct drm_device *dev = encoder->dev;
  79        struct drm_connector *connector;
  80        struct drm_bridge *bridge;
  81        struct videomode vm = { 0 };
  82        u32 bus_flags;
  83
  84        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
  85                if (connector->encoder == encoder)
  86                        break;
  87        }
  88
  89        drm_display_mode_to_videomode(adjusted_mode, &vm);
  90
  91        /*
  92         * HACK: This fixes the vm flags.
  93         * struct drm_display_mode does not contain the VSYNC/HSYNC/DE flags and
  94         * they get lost when converting back and forth between struct
  95         * drm_display_mode and struct videomode. The hack below goes and
  96         * fetches the missing flags.
  97         *
  98         * A better solution is to use DRM's bus-flags through the whole driver.
  99         */
 100        for (bridge = output->bridge; bridge;
 101             bridge = drm_bridge_get_next_bridge(bridge)) {
 102                if (!bridge->timings)
 103                        continue;
 104
 105                bus_flags = bridge->timings->input_bus_flags;
 106                omap_encoder_update_videomode_flags(&vm, bus_flags);
 107        }
 108
 109        bus_flags = connector->display_info.bus_flags;
 110        omap_encoder_update_videomode_flags(&vm, bus_flags);
 111
 112        /* Set timings for all devices in the display pipeline. */
 113        dss_mgr_set_timings(output, &vm);
 114}
 115
 116static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
 117        .mode_set = omap_encoder_mode_set,
 118};
 119
 120/* initialize encoder */
 121struct drm_encoder *omap_encoder_init(struct drm_device *dev,
 122                                      struct omap_dss_device *output)
 123{
 124        struct drm_encoder *encoder = NULL;
 125        struct omap_encoder *omap_encoder;
 126
 127        omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
 128        if (!omap_encoder)
 129                goto fail;
 130
 131        omap_encoder->output = output;
 132
 133        encoder = &omap_encoder->base;
 134
 135        drm_encoder_init(dev, encoder, &omap_encoder_funcs,
 136                         DRM_MODE_ENCODER_TMDS, NULL);
 137        drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
 138
 139        return encoder;
 140
 141fail:
 142        if (encoder)
 143                omap_encoder_destroy(encoder);
 144
 145        return NULL;
 146}
 147