linux/drivers/iio/adc/stmpe-adc.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 *  STMicroelectronics STMPE811 IIO ADC Driver
   4 *
   5 *  4 channel, 10/12-bit ADC
   6 *
   7 *  Copyright (C) 2013-2018 Toradex AG <stefan.agner@toradex.com>
   8 */
   9
  10#include <linux/completion.h>
  11#include <linux/err.h>
  12#include <linux/iio/iio.h>
  13#include <linux/interrupt.h>
  14#include <linux/kernel.h>
  15#include <linux/mfd/stmpe.h>
  16#include <linux/module.h>
  17#include <linux/of_platform.h>
  18#include <linux/platform_device.h>
  19#include <linux/device.h>
  20
  21#define STMPE_REG_INT_STA               0x0B
  22#define STMPE_REG_ADC_INT_EN            0x0E
  23#define STMPE_REG_ADC_INT_STA           0x0F
  24
  25#define STMPE_REG_ADC_CTRL1             0x20
  26#define STMPE_REG_ADC_CTRL2             0x21
  27#define STMPE_REG_ADC_CAPT              0x22
  28#define STMPE_REG_ADC_DATA_CH(channel)  (0x30 + 2 * (channel))
  29
  30#define STMPE_REG_TEMP_CTRL             0x60
  31#define STMPE_TEMP_CTRL_ENABLE          BIT(0)
  32#define STMPE_TEMP_CTRL_ACQ             BIT(1)
  33#define STMPE_TEMP_CTRL_THRES_EN        BIT(3)
  34#define STMPE_START_ONE_TEMP_CONV       (STMPE_TEMP_CTRL_ENABLE | \
  35                                        STMPE_TEMP_CTRL_ACQ | \
  36                                        STMPE_TEMP_CTRL_THRES_EN)
  37#define STMPE_REG_TEMP_DATA             0x61
  38#define STMPE_REG_TEMP_TH               0x63
  39#define STMPE_ADC_LAST_NR               7
  40#define STMPE_TEMP_CHANNEL              (STMPE_ADC_LAST_NR + 1)
  41
  42#define STMPE_ADC_CH(channel)           ((1 << (channel)) & 0xff)
  43
  44#define STMPE_ADC_TIMEOUT               msecs_to_jiffies(1000)
  45
  46struct stmpe_adc {
  47        struct stmpe *stmpe;
  48        struct clk *clk;
  49        struct device *dev;
  50        struct mutex lock;
  51
  52        /* We are allocating plus one for the temperature channel */
  53        struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2];
  54
  55        struct completion completion;
  56
  57        u8 channel;
  58        u32 value;
  59};
  60
  61static int stmpe_read_voltage(struct stmpe_adc *info,
  62                struct iio_chan_spec const *chan, int *val)
  63{
  64        long ret;
  65
  66        mutex_lock(&info->lock);
  67
  68        reinit_completion(&info->completion);
  69
  70        info->channel = (u8)chan->channel;
  71
  72        if (info->channel > STMPE_ADC_LAST_NR) {
  73                mutex_unlock(&info->lock);
  74                return -EINVAL;
  75        }
  76
  77        stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
  78                        STMPE_ADC_CH(info->channel));
  79
  80        ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
  81
  82        if (ret <= 0) {
  83                stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
  84                                STMPE_ADC_CH(info->channel));
  85                mutex_unlock(&info->lock);
  86                return -ETIMEDOUT;
  87        }
  88
  89        *val = info->value;
  90
  91        mutex_unlock(&info->lock);
  92
  93        return 0;
  94}
  95
  96static int stmpe_read_temp(struct stmpe_adc *info,
  97                struct iio_chan_spec const *chan, int *val)
  98{
  99        long ret;
 100
 101        mutex_lock(&info->lock);
 102
 103        reinit_completion(&info->completion);
 104
 105        info->channel = (u8)chan->channel;
 106
 107        if (info->channel != STMPE_TEMP_CHANNEL) {
 108                mutex_unlock(&info->lock);
 109                return -EINVAL;
 110        }
 111
 112        stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL,
 113                        STMPE_START_ONE_TEMP_CONV);
 114
 115        ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 116
 117        if (ret <= 0) {
 118                mutex_unlock(&info->lock);
 119                return -ETIMEDOUT;
 120        }
 121
 122        /*
 123         * absolute temp = +V3.3 * value /7.51 [K]
 124         * scale to [milli °C]
 125         */
 126        *val = ((449960l * info->value) / 1024l) - 273150;
 127
 128        mutex_unlock(&info->lock);
 129
 130        return 0;
 131}
 132
 133static int stmpe_read_raw(struct iio_dev *indio_dev,
 134                          struct iio_chan_spec const *chan,
 135                          int *val,
 136                          int *val2,
 137                          long mask)
 138{
 139        struct stmpe_adc *info = iio_priv(indio_dev);
 140        long ret;
 141
 142        switch (mask) {
 143        case IIO_CHAN_INFO_RAW:
 144        case IIO_CHAN_INFO_PROCESSED:
 145
 146                switch (chan->type) {
 147                case IIO_VOLTAGE:
 148                        ret = stmpe_read_voltage(info, chan, val);
 149                        break;
 150
 151                case IIO_TEMP:
 152                        ret = stmpe_read_temp(info, chan, val);
 153                        break;
 154                default:
 155                        return -EINVAL;
 156                }
 157
 158                if (ret < 0)
 159                        return ret;
 160
 161                return IIO_VAL_INT;
 162
 163        case IIO_CHAN_INFO_SCALE:
 164                *val = 3300;
 165                *val2 = info->stmpe->mod_12b ? 12 : 10;
 166                return IIO_VAL_FRACTIONAL_LOG2;
 167
 168        default:
 169                break;
 170        }
 171
 172        return -EINVAL;
 173}
 174
 175static irqreturn_t stmpe_adc_isr(int irq, void *dev_id)
 176{
 177        struct stmpe_adc *info = (struct stmpe_adc *)dev_id;
 178        __be16 data;
 179
 180        if (info->channel <= STMPE_ADC_LAST_NR) {
 181                int int_sta;
 182
 183                int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA);
 184
 185                /* Is the interrupt relevant */
 186                if (!(int_sta & STMPE_ADC_CH(info->channel)))
 187                        return IRQ_NONE;
 188
 189                /* Read value */
 190                stmpe_block_read(info->stmpe,
 191                        STMPE_REG_ADC_DATA_CH(info->channel), 2, (u8 *) &data);
 192
 193                stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta);
 194        } else if (info->channel == STMPE_TEMP_CHANNEL) {
 195                /* Read value */
 196                stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2,
 197                                (u8 *) &data);
 198        } else {
 199                return IRQ_NONE;
 200        }
 201
 202        info->value = (u32) be16_to_cpu(data);
 203        complete(&info->completion);
 204
 205        return IRQ_HANDLED;
 206}
 207
 208static const struct iio_info stmpe_adc_iio_info = {
 209        .read_raw = &stmpe_read_raw,
 210};
 211
 212static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan)
 213{
 214        ics->type = IIO_VOLTAGE;
 215        ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 216        ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
 217        ics->indexed = 1;
 218        ics->channel = chan;
 219}
 220
 221static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan)
 222{
 223        ics->type = IIO_TEMP;
 224        ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED);
 225        ics->indexed = 1;
 226        ics->channel = chan;
 227}
 228
 229static int stmpe_adc_init_hw(struct stmpe_adc *adc)
 230{
 231        int ret;
 232        struct stmpe *stmpe = adc->stmpe;
 233
 234        ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC);
 235        if (ret) {
 236                dev_err(stmpe->dev, "Could not enable clock for ADC\n");
 237                return ret;
 238        }
 239
 240        ret = stmpe811_adc_common_init(stmpe);
 241        if (ret) {
 242                stmpe_disable(stmpe, STMPE_BLOCK_ADC);
 243                return ret;
 244        }
 245
 246        /* use temp irq for each conversion completion */
 247        stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0);
 248        stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0);
 249
 250        return 0;
 251}
 252
 253static int stmpe_adc_probe(struct platform_device *pdev)
 254{
 255        struct iio_dev *indio_dev;
 256        struct stmpe_adc *info;
 257        struct device_node *np;
 258        u32 norequest_mask = 0;
 259        int irq_temp, irq_adc;
 260        int num_chan = 0;
 261        int i = 0;
 262        int ret;
 263
 264        irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC");
 265        if (irq_adc < 0)
 266                return irq_adc;
 267
 268        indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc));
 269        if (!indio_dev) {
 270                dev_err(&pdev->dev, "failed allocating iio device\n");
 271                return -ENOMEM;
 272        }
 273
 274        info = iio_priv(indio_dev);
 275        mutex_init(&info->lock);
 276
 277        init_completion(&info->completion);
 278        ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL,
 279                                        stmpe_adc_isr, IRQF_ONESHOT,
 280                                        "stmpe-adc", info);
 281        if (ret < 0) {
 282                dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
 283                                irq_adc);
 284                return ret;
 285        }
 286
 287        irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS");
 288        if (irq_temp >= 0) {
 289                ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL,
 290                                                stmpe_adc_isr, IRQF_ONESHOT,
 291                                                "stmpe-adc", info);
 292                if (ret < 0)
 293                        dev_warn(&pdev->dev, "failed requesting irq for"
 294                                 " temp sensor, irq = %d\n", irq_temp);
 295        }
 296
 297        platform_set_drvdata(pdev, indio_dev);
 298
 299        indio_dev->name         = dev_name(&pdev->dev);
 300        indio_dev->info         = &stmpe_adc_iio_info;
 301        indio_dev->modes        = INDIO_DIRECT_MODE;
 302
 303        info->stmpe = dev_get_drvdata(pdev->dev.parent);
 304
 305        np = pdev->dev.of_node;
 306
 307        if (!np)
 308                dev_err(&pdev->dev, "no device tree node found\n");
 309
 310        of_property_read_u32(np, "st,norequest-mask", &norequest_mask);
 311
 312        for_each_clear_bit(i, (unsigned long *) &norequest_mask,
 313                           (STMPE_ADC_LAST_NR + 1)) {
 314                stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i);
 315                num_chan++;
 316        }
 317        stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i);
 318        num_chan++;
 319        indio_dev->channels = info->stmpe_adc_iio_channels;
 320        indio_dev->num_channels = num_chan;
 321
 322        ret = stmpe_adc_init_hw(info);
 323        if (ret)
 324                return ret;
 325
 326        stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
 327                        ~(norequest_mask & 0xFF));
 328
 329        stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
 330                        ~(norequest_mask & 0xFF));
 331
 332        return devm_iio_device_register(&pdev->dev, indio_dev);
 333}
 334
 335static int __maybe_unused stmpe_adc_resume(struct device *dev)
 336{
 337        struct iio_dev *indio_dev = dev_get_drvdata(dev);
 338        struct stmpe_adc *info = iio_priv(indio_dev);
 339
 340        stmpe_adc_init_hw(info);
 341
 342        return 0;
 343}
 344
 345static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
 346
 347static struct platform_driver stmpe_adc_driver = {
 348        .probe          = stmpe_adc_probe,
 349        .driver         = {
 350                .name   = "stmpe-adc",
 351                .pm     = &stmpe_adc_pm_ops,
 352        },
 353};
 354module_platform_driver(stmpe_adc_driver);
 355
 356static const struct of_device_id stmpe_adc_ids[] = {
 357        { .compatible = "st,stmpe-adc", },
 358        { },
 359};
 360MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
 361
 362MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
 363MODULE_DESCRIPTION("STMPEXXX ADC driver");
 364MODULE_LICENSE("GPL v2");
 365MODULE_ALIAS("platform:stmpe-adc");
 366