1
2
3
4
5
6
7
8#define pr_fmt(fmt) "hp03: " fmt
9
10#include <linux/module.h>
11#include <linux/delay.h>
12#include <linux/gpio/consumer.h>
13#include <linux/i2c.h>
14#include <linux/regmap.h>
15#include <linux/iio/iio.h>
16#include <linux/iio/sysfs.h>
17
18
19
20
21
22
23#define HP03_EEPROM_ADDR 0x50
24#define HP03_ADC_ADDR 0x77
25
26#define HP03_EEPROM_CX_OFFSET 0x10
27#define HP03_EEPROM_AB_OFFSET 0x1e
28#define HP03_EEPROM_CD_OFFSET 0x20
29
30#define HP03_ADC_WRITE_REG 0xff
31#define HP03_ADC_READ_REG 0xfd
32#define HP03_ADC_READ_PRESSURE 0xf0
33#define HP03_ADC_READ_TEMP 0xe8
34
35struct hp03_priv {
36 struct i2c_client *client;
37 struct mutex lock;
38 struct gpio_desc *xclr_gpio;
39
40 struct i2c_client *eeprom_client;
41 struct regmap *eeprom_regmap;
42
43 s32 pressure;
44 s32 temp;
45};
46
47static const struct iio_chan_spec hp03_channels[] = {
48 {
49 .type = IIO_PRESSURE,
50 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
51 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
52 },
53 {
54 .type = IIO_TEMP,
55 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
56 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
57 },
58};
59
60static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg)
61{
62 return false;
63}
64
65static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg)
66{
67 return false;
68}
69
70static const struct regmap_config hp03_regmap_config = {
71 .reg_bits = 8,
72 .val_bits = 8,
73
74 .max_register = HP03_EEPROM_CD_OFFSET + 1,
75 .cache_type = REGCACHE_RBTREE,
76
77 .writeable_reg = hp03_is_writeable_reg,
78 .volatile_reg = hp03_is_volatile_reg,
79};
80
81static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg)
82{
83 int ret;
84
85 ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg);
86 if (ret < 0)
87 return ret;
88
89 msleep(50);
90
91 return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG);
92}
93
94static int hp03_update_temp_pressure(struct hp03_priv *priv)
95{
96 struct device *dev = &priv->client->dev;
97 u8 coefs[18];
98 u16 cx_val[7];
99 int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x;
100 int i, ret;
101
102
103 ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET,
104 coefs, sizeof(coefs));
105 if (ret < 0) {
106 dev_err(dev, "Failed to read EEPROM (reg=%02x)\n",
107 HP03_EEPROM_CX_OFFSET);
108 return ret;
109 }
110
111
112 gpiod_set_value_cansleep(priv->xclr_gpio, 1);
113
114 ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE);
115 if (ret < 0) {
116 dev_err(dev, "Failed to read pressure\n");
117 goto err_adc;
118 }
119 d1_val = ret;
120
121 ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP);
122 if (ret < 0) {
123 dev_err(dev, "Failed to read temperature\n");
124 goto err_adc;
125 }
126 d2_val = ret;
127
128 gpiod_set_value_cansleep(priv->xclr_gpio, 0);
129
130
131 for (i = 0; i < 7; i++)
132 cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0);
133 d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8);
134 d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8);
135
136
137 if (d2_val >= cx_val[4])
138 ab_val = coefs[14];
139 else
140 ab_val = coefs[15];
141
142 diff_val = d2_val - cx_val[4];
143 dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16];
144 dut = diff_val - dut;
145
146 off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4;
147 sens = cx_val[0] + ((cx_val[2] * dut) >> 10);
148 x = ((sens * (d1_val - 7168)) >> 14) - off;
149
150 priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10);
151 priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]);
152
153 return 0;
154
155err_adc:
156 gpiod_set_value_cansleep(priv->xclr_gpio, 0);
157 return ret;
158}
159
160static int hp03_read_raw(struct iio_dev *indio_dev,
161 struct iio_chan_spec const *chan,
162 int *val, int *val2, long mask)
163{
164 struct hp03_priv *priv = iio_priv(indio_dev);
165 int ret;
166
167 mutex_lock(&priv->lock);
168 ret = hp03_update_temp_pressure(priv);
169 mutex_unlock(&priv->lock);
170
171 if (ret)
172 return ret;
173
174 switch (mask) {
175 case IIO_CHAN_INFO_RAW:
176 switch (chan->type) {
177 case IIO_PRESSURE:
178 *val = priv->pressure;
179 return IIO_VAL_INT;
180 case IIO_TEMP:
181 *val = priv->temp;
182 return IIO_VAL_INT;
183 default:
184 return -EINVAL;
185 }
186 break;
187 case IIO_CHAN_INFO_SCALE:
188 switch (chan->type) {
189 case IIO_PRESSURE:
190 *val = 0;
191 *val2 = 1000;
192 return IIO_VAL_INT_PLUS_MICRO;
193 case IIO_TEMP:
194 *val = 10;
195 return IIO_VAL_INT;
196 default:
197 return -EINVAL;
198 }
199 break;
200 default:
201 return -EINVAL;
202 }
203
204 return -EINVAL;
205}
206
207static const struct iio_info hp03_info = {
208 .read_raw = &hp03_read_raw,
209};
210
211static int hp03_probe(struct i2c_client *client,
212 const struct i2c_device_id *id)
213{
214 struct device *dev = &client->dev;
215 struct iio_dev *indio_dev;
216 struct hp03_priv *priv;
217 int ret;
218
219 indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
220 if (!indio_dev)
221 return -ENOMEM;
222
223 priv = iio_priv(indio_dev);
224 priv->client = client;
225 mutex_init(&priv->lock);
226
227 indio_dev->name = id->name;
228 indio_dev->channels = hp03_channels;
229 indio_dev->num_channels = ARRAY_SIZE(hp03_channels);
230 indio_dev->info = &hp03_info;
231 indio_dev->modes = INDIO_DIRECT_MODE;
232
233 priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH);
234 if (IS_ERR(priv->xclr_gpio)) {
235 dev_err(dev, "Failed to claim XCLR GPIO\n");
236 ret = PTR_ERR(priv->xclr_gpio);
237 return ret;
238 }
239
240
241
242
243
244
245 priv->eeprom_client = devm_i2c_new_dummy_device(dev, client->adapter,
246 HP03_EEPROM_ADDR);
247 if (IS_ERR(priv->eeprom_client)) {
248 dev_err(dev, "New EEPROM I2C device failed\n");
249 return PTR_ERR(priv->eeprom_client);
250 }
251
252 priv->eeprom_regmap = devm_regmap_init_i2c(priv->eeprom_client,
253 &hp03_regmap_config);
254 if (IS_ERR(priv->eeprom_regmap)) {
255 dev_err(dev, "Failed to allocate EEPROM regmap\n");
256 return PTR_ERR(priv->eeprom_regmap);
257 }
258
259 ret = devm_iio_device_register(dev, indio_dev);
260 if (ret) {
261 dev_err(dev, "Failed to register IIO device\n");
262 return ret;
263 }
264
265 return 0;
266}
267
268static const struct i2c_device_id hp03_id[] = {
269 { "hp03", 0 },
270 { },
271};
272MODULE_DEVICE_TABLE(i2c, hp03_id);
273
274static const struct of_device_id hp03_of_match[] = {
275 { .compatible = "hoperf,hp03" },
276 { },
277};
278MODULE_DEVICE_TABLE(of, hp03_of_match);
279
280static struct i2c_driver hp03_driver = {
281 .driver = {
282 .name = "hp03",
283 .of_match_table = hp03_of_match,
284 },
285 .probe = hp03_probe,
286 .id_table = hp03_id,
287};
288module_i2c_driver(hp03_driver);
289
290MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
291MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor");
292MODULE_LICENSE("GPL v2");
293
