1/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ 2/* 3 * Copyright(c) 2015 - 2020 Intel Corporation. 4 */ 5 6#ifndef _COMMON_H 7#define _COMMON_H 8 9#include <rdma/hfi/hfi1_user.h> 10 11/* 12 * This file contains defines, structures, etc. that are used 13 * to communicate between kernel and user code. 14 */ 15 16/* version of protocol header (known to chip also). In the long run, 17 * we should be able to generate and accept a range of version numbers; 18 * for now we only accept one, and it's compiled in. 19 */ 20#define IPS_PROTO_VERSION 2 21 22/* 23 * These are compile time constants that you may want to enable or disable 24 * if you are trying to debug problems with code or performance. 25 * HFI1_VERBOSE_TRACING define as 1 if you want additional tracing in 26 * fast path code 27 * HFI1_TRACE_REGWRITES define as 1 if you want register writes to be 28 * traced in fast path code 29 * _HFI1_TRACING define as 0 if you want to remove all tracing in a 30 * compilation unit 31 */ 32 33/* driver/hw feature set bitmask */ 34#define HFI1_CAP_USER_SHIFT 24 35#define HFI1_CAP_MASK ((1UL << HFI1_CAP_USER_SHIFT) - 1) 36/* locked flag - if set, only HFI1_CAP_WRITABLE_MASK bits can be set */ 37#define HFI1_CAP_LOCKED_SHIFT 63 38#define HFI1_CAP_LOCKED_MASK 0x1ULL 39#define HFI1_CAP_LOCKED_SMASK (HFI1_CAP_LOCKED_MASK << HFI1_CAP_LOCKED_SHIFT) 40/* extra bits used between kernel and user processes */ 41#define HFI1_CAP_MISC_SHIFT (HFI1_CAP_USER_SHIFT * 2) 42#define HFI1_CAP_MISC_MASK ((1ULL << (HFI1_CAP_LOCKED_SHIFT - \ 43 HFI1_CAP_MISC_SHIFT)) - 1) 44 45#define HFI1_CAP_KSET(cap) ({ hfi1_cap_mask |= HFI1_CAP_##cap; hfi1_cap_mask; }) 46#define HFI1_CAP_KCLEAR(cap) \ 47 ({ \ 48 hfi1_cap_mask &= ~HFI1_CAP_##cap; \ 49 hfi1_cap_mask; \ 50 }) 51#define HFI1_CAP_USET(cap) \ 52 ({ \ 53 hfi1_cap_mask |= (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ 54 hfi1_cap_mask; \ 55 }) 56#define HFI1_CAP_UCLEAR(cap) \ 57 ({ \ 58 hfi1_cap_mask &= ~(HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ 59 hfi1_cap_mask; \ 60 }) 61#define HFI1_CAP_SET(cap) \ 62 ({ \ 63 hfi1_cap_mask |= (HFI1_CAP_##cap | (HFI1_CAP_##cap << \ 64 HFI1_CAP_USER_SHIFT)); \ 65 hfi1_cap_mask; \ 66 }) 67#define HFI1_CAP_CLEAR(cap) \ 68 ({ \ 69 hfi1_cap_mask &= ~(HFI1_CAP_##cap | \ 70 (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT)); \ 71 hfi1_cap_mask; \ 72 }) 73#define HFI1_CAP_LOCK() \ 74 ({ hfi1_cap_mask |= HFI1_CAP_LOCKED_SMASK; hfi1_cap_mask; }) 75#define HFI1_CAP_LOCKED() (!!(hfi1_cap_mask & HFI1_CAP_LOCKED_SMASK)) 76/* 77 * The set of capability bits that can be changed after initial load 78 * This set is the same for kernel and user contexts. However, for 79 * user contexts, the set can be further filtered by using the 80 * HFI1_CAP_RESERVED_MASK bits. 81 */ 82#define HFI1_CAP_WRITABLE_MASK (HFI1_CAP_SDMA_AHG | \ 83 HFI1_CAP_HDRSUPP | \ 84 HFI1_CAP_MULTI_PKT_EGR | \ 85 HFI1_CAP_NODROP_RHQ_FULL | \ 86 HFI1_CAP_NODROP_EGR_FULL | \ 87 HFI1_CAP_ALLOW_PERM_JKEY | \ 88 HFI1_CAP_STATIC_RATE_CTRL | \ 89 HFI1_CAP_PRINT_UNIMPL | \ 90 HFI1_CAP_TID_UNMAP | \ 91 HFI1_CAP_OPFN) 92/* 93 * A set of capability bits that are "global" and are not allowed to be 94 * set in the user bitmask. 95 */ 96#define HFI1_CAP_RESERVED_MASK ((HFI1_CAP_SDMA | \ 97 HFI1_CAP_USE_SDMA_HEAD | \ 98 HFI1_CAP_EXTENDED_PSN | \ 99 HFI1_CAP_PRINT_UNIMPL | \ 100 HFI1_CAP_NO_INTEGRITY | \ 101 HFI1_CAP_PKEY_CHECK | \ 102 HFI1_CAP_TID_RDMA | \ 103 HFI1_CAP_OPFN | \ 104 HFI1_CAP_AIP) << \ 105 HFI1_CAP_USER_SHIFT) 106/* 107 * Set of capabilities that need to be enabled for kernel context in 108 * order to be allowed for user contexts, as well. 109 */ 110#define HFI1_CAP_MUST_HAVE_KERN (HFI1_CAP_STATIC_RATE_CTRL) 111/* Default enabled capabilities (both kernel and user) */ 112#define HFI1_CAP_MASK_DEFAULT (HFI1_CAP_HDRSUPP | \ 113 HFI1_CAP_NODROP_RHQ_FULL | \ 114 HFI1_CAP_NODROP_EGR_FULL | \ 115 HFI1_CAP_SDMA | \ 116 HFI1_CAP_PRINT_UNIMPL | \ 117 HFI1_CAP_STATIC_RATE_CTRL | \ 118 HFI1_CAP_PKEY_CHECK | \ 119 HFI1_CAP_MULTI_PKT_EGR | \ 120 HFI1_CAP_EXTENDED_PSN | \ 121 HFI1_CAP_AIP | \ 122 ((HFI1_CAP_HDRSUPP | \ 123 HFI1_CAP_MULTI_PKT_EGR | \ 124 HFI1_CAP_STATIC_RATE_CTRL | \ 125 HFI1_CAP_PKEY_CHECK | \ 126 HFI1_CAP_EARLY_CREDIT_RETURN) << \ 127 HFI1_CAP_USER_SHIFT)) 128/* 129 * A bitmask of kernel/global capabilities that should be communicated 130 * to user level processes. 131 */ 132#define HFI1_CAP_K2U (HFI1_CAP_SDMA | \ 133 HFI1_CAP_EXTENDED_PSN | \ 134 HFI1_CAP_PKEY_CHECK | \ 135 HFI1_CAP_NO_INTEGRITY) 136 137#define HFI1_USER_SWVERSION ((HFI1_USER_SWMAJOR << HFI1_SWMAJOR_SHIFT) | \ 138 HFI1_USER_SWMINOR) 139 140#ifndef HFI1_KERN_TYPE 141#define HFI1_KERN_TYPE 0 142#endif 143 144/* 145 * Similarly, this is the kernel version going back to the user. It's 146 * slightly different, in that we want to tell if the driver was built as 147 * part of a Intel release, or from the driver from openfabrics.org, 148 * kernel.org, or a standard distribution, for support reasons. 149 * The high bit is 0 for non-Intel and 1 for Intel-built/supplied. 150 * 151 * It's returned by the driver to the user code during initialization in the 152 * spi_sw_version field of hfi1_base_info, so the user code can in turn 153 * check for compatibility with the kernel. 154*/ 155#define HFI1_KERN_SWVERSION ((HFI1_KERN_TYPE << 31) | HFI1_USER_SWVERSION) 156 157/* 158 * Define the driver version number. This is something that refers only 159 * to the driver itself, not the software interfaces it supports. 160 */ 161#ifndef HFI1_DRIVER_VERSION_BASE 162#define HFI1_DRIVER_VERSION_BASE "0.9-294" 163#endif 164 165/* create the final driver version string */ 166#ifdef HFI1_IDSTR 167#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE " " HFI1_IDSTR 168#else 169#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE 170#endif 171 172/* 173 * Diagnostics can send a packet by writing the following 174 * struct to the diag packet special file. 175 * 176 * This allows a custom PBC qword, so that special modes and deliberate 177 * changes to CRCs can be used. 178 */ 179#define _DIAG_PKT_VERS 1 180struct diag_pkt { 181 __u16 version; /* structure version */ 182 __u16 unit; /* which device */ 183 __u16 sw_index; /* send sw index to use */ 184 __u16 len; /* data length, in bytes */ 185 __u16 port; /* port number */ 186 __u16 unused; 187 __u32 flags; /* call flags */ 188 __u64 data; /* user data pointer */ 189 __u64 pbc; /* PBC for the packet */ 190}; 191 192/* diag_pkt flags */ 193#define F_DIAGPKT_WAIT 0x1 /* wait until packet is sent */ 194 195/* 196 * The next set of defines are for packet headers, and chip register 197 * and memory bits that are visible to and/or used by user-mode software. 198 */ 199 200/* 201 * Receive Header Flags 202 */ 203#define RHF_PKT_LEN_SHIFT 0 204#define RHF_PKT_LEN_MASK 0xfffull 205#define RHF_PKT_LEN_SMASK (RHF_PKT_LEN_MASK << RHF_PKT_LEN_SHIFT) 206 207#define RHF_RCV_TYPE_SHIFT 12 208#define RHF_RCV_TYPE_MASK 0x7ull 209#define RHF_RCV_TYPE_SMASK (RHF_RCV_TYPE_MASK << RHF_RCV_TYPE_SHIFT) 210 211#define RHF_USE_EGR_BFR_SHIFT 15 212#define RHF_USE_EGR_BFR_MASK 0x1ull 213#define RHF_USE_EGR_BFR_SMASK (RHF_USE_EGR_BFR_MASK << RHF_USE_EGR_BFR_SHIFT) 214 215#define RHF_EGR_INDEX_SHIFT 16 216#define RHF_EGR_INDEX_MASK 0x7ffull 217#define RHF_EGR_INDEX_SMASK (RHF_EGR_INDEX_MASK << RHF_EGR_INDEX_SHIFT) 218 219#define RHF_DC_INFO_SHIFT 27 220#define RHF_DC_INFO_MASK 0x1ull 221#define RHF_DC_INFO_SMASK (RHF_DC_INFO_MASK << RHF_DC_INFO_SHIFT) 222 223#define RHF_RCV_SEQ_SHIFT 28 224#define RHF_RCV_SEQ_MASK 0xfull 225#define RHF_RCV_SEQ_SMASK (RHF_RCV_SEQ_MASK << RHF_RCV_SEQ_SHIFT) 226 227#define RHF_EGR_OFFSET_SHIFT 32 228#define RHF_EGR_OFFSET_MASK 0xfffull 229#define RHF_EGR_OFFSET_SMASK (RHF_EGR_OFFSET_MASK << RHF_EGR_OFFSET_SHIFT) 230#define RHF_HDRQ_OFFSET_SHIFT 44 231#define RHF_HDRQ_OFFSET_MASK 0x1ffull 232#define RHF_HDRQ_OFFSET_SMASK (RHF_HDRQ_OFFSET_MASK << RHF_HDRQ_OFFSET_SHIFT) 233#define RHF_K_HDR_LEN_ERR (0x1ull << 53) 234#define RHF_DC_UNC_ERR (0x1ull << 54) 235#define RHF_DC_ERR (0x1ull << 55) 236#define RHF_RCV_TYPE_ERR_SHIFT 56 237#define RHF_RCV_TYPE_ERR_MASK 0x7ul 238#define RHF_RCV_TYPE_ERR_SMASK (RHF_RCV_TYPE_ERR_MASK << RHF_RCV_TYPE_ERR_SHIFT) 239#define RHF_TID_ERR (0x1ull << 59) 240#define RHF_LEN_ERR (0x1ull << 60) 241#define RHF_ECC_ERR (0x1ull << 61) 242#define RHF_RESERVED (0x1ull << 62) 243#define RHF_ICRC_ERR (0x1ull << 63) 244 245#define RHF_ERROR_SMASK 0xffe0000000000000ull /* bits 63:53 */ 246 247/* RHF receive types */ 248#define RHF_RCV_TYPE_EXPECTED 0 249#define RHF_RCV_TYPE_EAGER 1 250#define RHF_RCV_TYPE_IB 2 /* normal IB, IB Raw, or IPv6 */ 251#define RHF_RCV_TYPE_ERROR 3 252#define RHF_RCV_TYPE_BYPASS 4 253#define RHF_RCV_TYPE_INVALID5 5 254#define RHF_RCV_TYPE_INVALID6 6 255#define RHF_RCV_TYPE_INVALID7 7 256 257/* RHF receive type error - expected packet errors */ 258#define RHF_RTE_EXPECTED_FLOW_SEQ_ERR 0x2 259#define RHF_RTE_EXPECTED_FLOW_GEN_ERR 0x4 260 261/* RHF receive type error - eager packet errors */ 262#define RHF_RTE_EAGER_NO_ERR 0x0 263 264/* RHF receive type error - IB packet errors */ 265#define RHF_RTE_IB_NO_ERR 0x0 266 267/* RHF receive type error - error packet errors */ 268#define RHF_RTE_ERROR_NO_ERR 0x0 269#define RHF_RTE_ERROR_OP_CODE_ERR 0x1 270#define RHF_RTE_ERROR_KHDR_MIN_LEN_ERR 0x2 271#define RHF_RTE_ERROR_KHDR_HCRC_ERR 0x3 272#define RHF_RTE_ERROR_KHDR_KVER_ERR 0x4 273#define RHF_RTE_ERROR_CONTEXT_ERR 0x5 274#define RHF_RTE_ERROR_KHDR_TID_ERR 0x6 275 276/* RHF receive type error - bypass packet errors */ 277#define RHF_RTE_BYPASS_NO_ERR 0x0 278 279/* MAX RcvSEQ */ 280#define RHF_MAX_SEQ 13 281 282/* IB - LRH header constants */ 283#define HFI1_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ 284#define HFI1_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ 285 286/* misc. */ 287#define SC15_PACKET 0xF 288#define SIZE_OF_CRC 1 289#define SIZE_OF_LT 1 290#define MAX_16B_PADDING 12 /* CRC = 4, LT = 1, Pad = 0 to 7 bytes */ 291 292#define LIM_MGMT_P_KEY 0x7FFF 293#define FULL_MGMT_P_KEY 0xFFFF 294 295#define DEFAULT_P_KEY LIM_MGMT_P_KEY 296 297#define HFI1_PSM_IOC_BASE_SEQ 0x0 298 299/* Number of BTH.PSN bits used for sequence number in expected rcvs */ 300#define HFI1_KDETH_BTH_SEQ_SHIFT 11 301#define HFI1_KDETH_BTH_SEQ_MASK (BIT(HFI1_KDETH_BTH_SEQ_SHIFT) - 1) 302 303static inline __u64 rhf_to_cpu(const __le32 *rbuf) 304{ 305 return __le64_to_cpu(*((__le64 *)rbuf)); 306} 307 308static inline u64 rhf_err_flags(u64 rhf) 309{ 310 return rhf & RHF_ERROR_SMASK; 311} 312 313static inline u32 rhf_rcv_type(u64 rhf) 314{ 315 return (rhf >> RHF_RCV_TYPE_SHIFT) & RHF_RCV_TYPE_MASK; 316} 317 318static inline u32 rhf_rcv_type_err(u64 rhf) 319{ 320 return (rhf >> RHF_RCV_TYPE_ERR_SHIFT) & RHF_RCV_TYPE_ERR_MASK; 321} 322 323/* return size is in bytes, not DWORDs */ 324static inline u32 rhf_pkt_len(u64 rhf) 325{ 326 return ((rhf & RHF_PKT_LEN_SMASK) >> RHF_PKT_LEN_SHIFT) << 2; 327} 328 329static inline u32 rhf_egr_index(u64 rhf) 330{ 331 return (rhf >> RHF_EGR_INDEX_SHIFT) & RHF_EGR_INDEX_MASK; 332} 333 334static inline u32 rhf_rcv_seq(u64 rhf) 335{ 336 return (rhf >> RHF_RCV_SEQ_SHIFT) & RHF_RCV_SEQ_MASK; 337} 338 339/* returned offset is in DWORDS */ 340static inline u32 rhf_hdrq_offset(u64 rhf) 341{ 342 return (rhf >> RHF_HDRQ_OFFSET_SHIFT) & RHF_HDRQ_OFFSET_MASK; 343} 344 345static inline u64 rhf_use_egr_bfr(u64 rhf) 346{ 347 return rhf & RHF_USE_EGR_BFR_SMASK; 348} 349 350static inline u64 rhf_dc_info(u64 rhf) 351{ 352 return rhf & RHF_DC_INFO_SMASK; 353} 354 355static inline u32 rhf_egr_buf_offset(u64 rhf) 356{ 357 return (rhf >> RHF_EGR_OFFSET_SHIFT) & RHF_EGR_OFFSET_MASK; 358} 359#endif /* _COMMON_H */ 360