1
2
3
4
5
6
7
8
9
10
11#include <linux/module.h>
12#include <linux/interrupt.h>
13#include <linux/irq.h>
14#include <linux/workqueue.h>
15#include <linux/errno.h>
16#include <linux/pm.h>
17#include <linux/platform_device.h>
18#include <linux/input.h>
19#include <linux/i2c.h>
20#include <linux/gpio/driver.h>
21#include <linux/slab.h>
22
23#include <linux/platform_data/adp5588.h>
24
25
26#define KEY_EV_PRESSED (1 << 7)
27#define KEY_EV_MASK (0x7F)
28
29#define KP_SEL(x) (0xFFFF >> (16 - x))
30
31#define KEYP_MAX_EVENT 10
32
33
34
35
36
37
38#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
39
40struct adp5588_kpad {
41 struct i2c_client *client;
42 struct input_dev *input;
43 struct delayed_work work;
44 unsigned long delay;
45 unsigned short keycode[ADP5588_KEYMAPSIZE];
46 const struct adp5588_gpi_map *gpimap;
47 unsigned short gpimapsize;
48#ifdef CONFIG_GPIOLIB
49 unsigned char gpiomap[ADP5588_MAXGPIO];
50 bool export_gpio;
51 struct gpio_chip gc;
52 struct mutex gpio_lock;
53 u8 dat_out[3];
54 u8 dir[3];
55#endif
56};
57
58static int adp5588_read(struct i2c_client *client, u8 reg)
59{
60 int ret = i2c_smbus_read_byte_data(client, reg);
61
62 if (ret < 0)
63 dev_err(&client->dev, "Read Error\n");
64
65 return ret;
66}
67
68static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
69{
70 return i2c_smbus_write_byte_data(client, reg, val);
71}
72
73#ifdef CONFIG_GPIOLIB
74static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
75{
76 struct adp5588_kpad *kpad = gpiochip_get_data(chip);
77 unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
78 unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
79 int val;
80
81 mutex_lock(&kpad->gpio_lock);
82
83 if (kpad->dir[bank] & bit)
84 val = kpad->dat_out[bank];
85 else
86 val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
87
88 mutex_unlock(&kpad->gpio_lock);
89
90 return !!(val & bit);
91}
92
93static void adp5588_gpio_set_value(struct gpio_chip *chip,
94 unsigned off, int val)
95{
96 struct adp5588_kpad *kpad = gpiochip_get_data(chip);
97 unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
98 unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
99
100 mutex_lock(&kpad->gpio_lock);
101
102 if (val)
103 kpad->dat_out[bank] |= bit;
104 else
105 kpad->dat_out[bank] &= ~bit;
106
107 adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
108 kpad->dat_out[bank]);
109
110 mutex_unlock(&kpad->gpio_lock);
111}
112
113static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
114{
115 struct adp5588_kpad *kpad = gpiochip_get_data(chip);
116 unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
117 unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
118 int ret;
119
120 mutex_lock(&kpad->gpio_lock);
121
122 kpad->dir[bank] &= ~bit;
123 ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
124
125 mutex_unlock(&kpad->gpio_lock);
126
127 return ret;
128}
129
130static int adp5588_gpio_direction_output(struct gpio_chip *chip,
131 unsigned off, int val)
132{
133 struct adp5588_kpad *kpad = gpiochip_get_data(chip);
134 unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
135 unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
136 int ret;
137
138 mutex_lock(&kpad->gpio_lock);
139
140 kpad->dir[bank] |= bit;
141
142 if (val)
143 kpad->dat_out[bank] |= bit;
144 else
145 kpad->dat_out[bank] &= ~bit;
146
147 ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
148 kpad->dat_out[bank]);
149 ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
150 kpad->dir[bank]);
151
152 mutex_unlock(&kpad->gpio_lock);
153
154 return ret;
155}
156
157static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
158 const struct adp5588_kpad_platform_data *pdata)
159{
160 bool pin_used[ADP5588_MAXGPIO];
161 int n_unused = 0;
162 int i;
163
164 memset(pin_used, 0, sizeof(pin_used));
165
166 for (i = 0; i < pdata->rows; i++)
167 pin_used[i] = true;
168
169 for (i = 0; i < pdata->cols; i++)
170 pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
171
172 for (i = 0; i < kpad->gpimapsize; i++)
173 pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
174
175 for (i = 0; i < ADP5588_MAXGPIO; i++)
176 if (!pin_used[i])
177 kpad->gpiomap[n_unused++] = i;
178
179 return n_unused;
180}
181
182static int adp5588_gpio_add(struct adp5588_kpad *kpad)
183{
184 struct device *dev = &kpad->client->dev;
185 const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
186 const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
187 int i, error;
188
189 if (!gpio_data)
190 return 0;
191
192 kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
193 if (kpad->gc.ngpio == 0) {
194 dev_info(dev, "No unused gpios left to export\n");
195 return 0;
196 }
197
198 kpad->export_gpio = true;
199
200 kpad->gc.direction_input = adp5588_gpio_direction_input;
201 kpad->gc.direction_output = adp5588_gpio_direction_output;
202 kpad->gc.get = adp5588_gpio_get_value;
203 kpad->gc.set = adp5588_gpio_set_value;
204 kpad->gc.can_sleep = 1;
205
206 kpad->gc.base = gpio_data->gpio_start;
207 kpad->gc.label = kpad->client->name;
208 kpad->gc.owner = THIS_MODULE;
209 kpad->gc.names = gpio_data->names;
210
211 mutex_init(&kpad->gpio_lock);
212
213 error = gpiochip_add_data(&kpad->gc, kpad);
214 if (error) {
215 dev_err(dev, "gpiochip_add failed, err: %d\n", error);
216 return error;
217 }
218
219 for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
220 kpad->dat_out[i] = adp5588_read(kpad->client,
221 GPIO_DAT_OUT1 + i);
222 kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
223 }
224
225 if (gpio_data->setup) {
226 error = gpio_data->setup(kpad->client,
227 kpad->gc.base, kpad->gc.ngpio,
228 gpio_data->context);
229 if (error)
230 dev_warn(dev, "setup failed, %d\n", error);
231 }
232
233 return 0;
234}
235
236static void adp5588_gpio_remove(struct adp5588_kpad *kpad)
237{
238 struct device *dev = &kpad->client->dev;
239 const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
240 const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
241 int error;
242
243 if (!kpad->export_gpio)
244 return;
245
246 if (gpio_data->teardown) {
247 error = gpio_data->teardown(kpad->client,
248 kpad->gc.base, kpad->gc.ngpio,
249 gpio_data->context);
250 if (error)
251 dev_warn(dev, "teardown failed %d\n", error);
252 }
253
254 gpiochip_remove(&kpad->gc);
255}
256#else
257static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
258{
259 return 0;
260}
261
262static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
263{
264}
265#endif
266
267static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
268{
269 int i, j;
270
271 for (i = 0; i < ev_cnt; i++) {
272 int key = adp5588_read(kpad->client, Key_EVENTA + i);
273 int key_val = key & KEY_EV_MASK;
274
275 if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
276 for (j = 0; j < kpad->gpimapsize; j++) {
277 if (key_val == kpad->gpimap[j].pin) {
278 input_report_switch(kpad->input,
279 kpad->gpimap[j].sw_evt,
280 key & KEY_EV_PRESSED);
281 break;
282 }
283 }
284 } else {
285 input_report_key(kpad->input,
286 kpad->keycode[key_val - 1],
287 key & KEY_EV_PRESSED);
288 }
289 }
290}
291
292static void adp5588_work(struct work_struct *work)
293{
294 struct adp5588_kpad *kpad = container_of(work,
295 struct adp5588_kpad, work.work);
296 struct i2c_client *client = kpad->client;
297 int status, ev_cnt;
298
299 status = adp5588_read(client, INT_STAT);
300
301 if (status & ADP5588_OVR_FLOW_INT)
302 dev_err(&client->dev, "Event Overflow Error\n");
303
304 if (status & ADP5588_KE_INT) {
305 ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
306 if (ev_cnt) {
307 adp5588_report_events(kpad, ev_cnt);
308 input_sync(kpad->input);
309 }
310 }
311 adp5588_write(client, INT_STAT, status);
312}
313
314static irqreturn_t adp5588_irq(int irq, void *handle)
315{
316 struct adp5588_kpad *kpad = handle;
317
318
319
320
321
322
323
324 schedule_delayed_work(&kpad->work, kpad->delay);
325
326 return IRQ_HANDLED;
327}
328
329static int adp5588_setup(struct i2c_client *client)
330{
331 const struct adp5588_kpad_platform_data *pdata =
332 dev_get_platdata(&client->dev);
333 const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
334 int i, ret;
335 unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
336
337 ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
338 ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
339 ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
340
341 if (pdata->en_keylock) {
342 ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
343 ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
344 ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
345 }
346
347 for (i = 0; i < KEYP_MAX_EVENT; i++)
348 ret |= adp5588_read(client, Key_EVENTA);
349
350 for (i = 0; i < pdata->gpimapsize; i++) {
351 unsigned short pin = pdata->gpimap[i].pin;
352
353 if (pin <= GPI_PIN_ROW_END) {
354 evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
355 } else {
356 evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
357 evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
358 }
359 }
360
361 if (pdata->gpimapsize) {
362 ret |= adp5588_write(client, GPI_EM1, evt_mode1);
363 ret |= adp5588_write(client, GPI_EM2, evt_mode2);
364 ret |= adp5588_write(client, GPI_EM3, evt_mode3);
365 }
366
367 if (gpio_data) {
368 for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
369 int pull_mask = gpio_data->pullup_dis_mask;
370
371 ret |= adp5588_write(client, GPIO_PULL1 + i,
372 (pull_mask >> (8 * i)) & 0xFF);
373 }
374 }
375
376 ret |= adp5588_write(client, INT_STAT,
377 ADP5588_CMP2_INT | ADP5588_CMP1_INT |
378 ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
379 ADP5588_GPI_INT | ADP5588_KE_INT);
380
381 ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
382 ADP5588_OVR_FLOW_IEN |
383 ADP5588_KE_IEN);
384
385 if (ret < 0) {
386 dev_err(&client->dev, "Write Error\n");
387 return ret;
388 }
389
390 return 0;
391}
392
393static void adp5588_report_switch_state(struct adp5588_kpad *kpad)
394{
395 int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
396 int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
397 int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
398 int gpi_stat_tmp, pin_loc;
399 int i;
400
401 for (i = 0; i < kpad->gpimapsize; i++) {
402 unsigned short pin = kpad->gpimap[i].pin;
403
404 if (pin <= GPI_PIN_ROW_END) {
405 gpi_stat_tmp = gpi_stat1;
406 pin_loc = pin - GPI_PIN_ROW_BASE;
407 } else if ((pin - GPI_PIN_COL_BASE) < 8) {
408 gpi_stat_tmp = gpi_stat2;
409 pin_loc = pin - GPI_PIN_COL_BASE;
410 } else {
411 gpi_stat_tmp = gpi_stat3;
412 pin_loc = pin - GPI_PIN_COL_BASE - 8;
413 }
414
415 if (gpi_stat_tmp < 0) {
416 dev_err(&kpad->client->dev,
417 "Can't read GPIO_DAT_STAT switch %d default to OFF\n",
418 pin);
419 gpi_stat_tmp = 0;
420 }
421
422 input_report_switch(kpad->input,
423 kpad->gpimap[i].sw_evt,
424 !(gpi_stat_tmp & (1 << pin_loc)));
425 }
426
427 input_sync(kpad->input);
428}
429
430
431static int adp5588_probe(struct i2c_client *client,
432 const struct i2c_device_id *id)
433{
434 struct adp5588_kpad *kpad;
435 const struct adp5588_kpad_platform_data *pdata =
436 dev_get_platdata(&client->dev);
437 struct input_dev *input;
438 unsigned int revid;
439 int ret, i;
440 int error;
441
442 if (!i2c_check_functionality(client->adapter,
443 I2C_FUNC_SMBUS_BYTE_DATA)) {
444 dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
445 return -EIO;
446 }
447
448 if (!pdata) {
449 dev_err(&client->dev, "no platform data?\n");
450 return -EINVAL;
451 }
452
453 if (!pdata->rows || !pdata->cols || !pdata->keymap) {
454 dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
455 return -EINVAL;
456 }
457
458 if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
459 dev_err(&client->dev, "invalid keymapsize\n");
460 return -EINVAL;
461 }
462
463 if (!pdata->gpimap && pdata->gpimapsize) {
464 dev_err(&client->dev, "invalid gpimap from pdata\n");
465 return -EINVAL;
466 }
467
468 if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
469 dev_err(&client->dev, "invalid gpimapsize\n");
470 return -EINVAL;
471 }
472
473 for (i = 0; i < pdata->gpimapsize; i++) {
474 unsigned short pin = pdata->gpimap[i].pin;
475
476 if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
477 dev_err(&client->dev, "invalid gpi pin data\n");
478 return -EINVAL;
479 }
480
481 if (pin <= GPI_PIN_ROW_END) {
482 if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
483 dev_err(&client->dev, "invalid gpi row data\n");
484 return -EINVAL;
485 }
486 } else {
487 if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
488 dev_err(&client->dev, "invalid gpi col data\n");
489 return -EINVAL;
490 }
491 }
492 }
493
494 if (!client->irq) {
495 dev_err(&client->dev, "no IRQ?\n");
496 return -EINVAL;
497 }
498
499 kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
500 input = input_allocate_device();
501 if (!kpad || !input) {
502 error = -ENOMEM;
503 goto err_free_mem;
504 }
505
506 kpad->client = client;
507 kpad->input = input;
508 INIT_DELAYED_WORK(&kpad->work, adp5588_work);
509
510 ret = adp5588_read(client, DEV_ID);
511 if (ret < 0) {
512 error = ret;
513 goto err_free_mem;
514 }
515
516 revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
517 if (WA_DELAYED_READOUT_REVID(revid))
518 kpad->delay = msecs_to_jiffies(30);
519
520 input->name = client->name;
521 input->phys = "adp5588-keys/input0";
522 input->dev.parent = &client->dev;
523
524 input_set_drvdata(input, kpad);
525
526 input->id.bustype = BUS_I2C;
527 input->id.vendor = 0x0001;
528 input->id.product = 0x0001;
529 input->id.version = revid;
530
531 input->keycodesize = sizeof(kpad->keycode[0]);
532 input->keycodemax = pdata->keymapsize;
533 input->keycode = kpad->keycode;
534
535 memcpy(kpad->keycode, pdata->keymap,
536 pdata->keymapsize * input->keycodesize);
537
538 kpad->gpimap = pdata->gpimap;
539 kpad->gpimapsize = pdata->gpimapsize;
540
541
542 __set_bit(EV_KEY, input->evbit);
543
544 if (pdata->repeat)
545 __set_bit(EV_REP, input->evbit);
546
547 for (i = 0; i < input->keycodemax; i++)
548 if (kpad->keycode[i] <= KEY_MAX)
549 __set_bit(kpad->keycode[i], input->keybit);
550 __clear_bit(KEY_RESERVED, input->keybit);
551
552 if (kpad->gpimapsize)
553 __set_bit(EV_SW, input->evbit);
554 for (i = 0; i < kpad->gpimapsize; i++)
555 __set_bit(kpad->gpimap[i].sw_evt, input->swbit);
556
557 error = input_register_device(input);
558 if (error) {
559 dev_err(&client->dev, "unable to register input device\n");
560 goto err_free_mem;
561 }
562
563 error = request_irq(client->irq, adp5588_irq,
564 IRQF_TRIGGER_FALLING,
565 client->dev.driver->name, kpad);
566 if (error) {
567 dev_err(&client->dev, "irq %d busy?\n", client->irq);
568 goto err_unreg_dev;
569 }
570
571 error = adp5588_setup(client);
572 if (error)
573 goto err_free_irq;
574
575 if (kpad->gpimapsize)
576 adp5588_report_switch_state(kpad);
577
578 error = adp5588_gpio_add(kpad);
579 if (error)
580 goto err_free_irq;
581
582 device_init_wakeup(&client->dev, 1);
583 i2c_set_clientdata(client, kpad);
584
585 dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
586 return 0;
587
588 err_free_irq:
589 free_irq(client->irq, kpad);
590 cancel_delayed_work_sync(&kpad->work);
591 err_unreg_dev:
592 input_unregister_device(input);
593 input = NULL;
594 err_free_mem:
595 input_free_device(input);
596 kfree(kpad);
597
598 return error;
599}
600
601static int adp5588_remove(struct i2c_client *client)
602{
603 struct adp5588_kpad *kpad = i2c_get_clientdata(client);
604
605 adp5588_write(client, CFG, 0);
606 free_irq(client->irq, kpad);
607 cancel_delayed_work_sync(&kpad->work);
608 input_unregister_device(kpad->input);
609 adp5588_gpio_remove(kpad);
610 kfree(kpad);
611
612 return 0;
613}
614
615#ifdef CONFIG_PM
616static int adp5588_suspend(struct device *dev)
617{
618 struct adp5588_kpad *kpad = dev_get_drvdata(dev);
619 struct i2c_client *client = kpad->client;
620
621 disable_irq(client->irq);
622 cancel_delayed_work_sync(&kpad->work);
623
624 if (device_may_wakeup(&client->dev))
625 enable_irq_wake(client->irq);
626
627 return 0;
628}
629
630static int adp5588_resume(struct device *dev)
631{
632 struct adp5588_kpad *kpad = dev_get_drvdata(dev);
633 struct i2c_client *client = kpad->client;
634
635 if (device_may_wakeup(&client->dev))
636 disable_irq_wake(client->irq);
637
638 enable_irq(client->irq);
639
640 return 0;
641}
642
643static const struct dev_pm_ops adp5588_dev_pm_ops = {
644 .suspend = adp5588_suspend,
645 .resume = adp5588_resume,
646};
647#endif
648
649static const struct i2c_device_id adp5588_id[] = {
650 { "adp5588-keys", 0 },
651 { "adp5587-keys", 0 },
652 { }
653};
654MODULE_DEVICE_TABLE(i2c, adp5588_id);
655
656static struct i2c_driver adp5588_driver = {
657 .driver = {
658 .name = KBUILD_MODNAME,
659#ifdef CONFIG_PM
660 .pm = &adp5588_dev_pm_ops,
661#endif
662 },
663 .probe = adp5588_probe,
664 .remove = adp5588_remove,
665 .id_table = adp5588_id,
666};
667
668module_i2c_driver(adp5588_driver);
669
670MODULE_LICENSE("GPL");
671MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
672MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
673
