linux/drivers/macintosh/adbhid.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * drivers/macintosh/adbhid.c
   4 *
   5 * ADB HID driver for Power Macintosh computers.
   6 *
   7 * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl.
   8 * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras
   9 * with considerable contributions from Ben Herrenschmidt and others.
  10 *
  11 * Copyright (C) 2000 Franz Sirl.
  12 *
  13 * Adapted to ADB changes and support for more devices by
  14 * Benjamin Herrenschmidt. Adapted from code in MkLinux
  15 * and reworked.
  16 * 
  17 * Supported devices:
  18 *
  19 * - Standard 1 button mouse
  20 * - All standard Apple Extended protocol (handler ID 4)
  21 * - mouseman and trackman mice & trackballs 
  22 * - PowerBook Trackpad (default setup: enable tapping)
  23 * - MicroSpeed mouse & trackball (needs testing)
  24 * - CH Products Trackball Pro (needs testing)
  25 * - Contour Design (Contour Mouse)
  26 * - Hunter digital (NoHandsMouse)
  27 * - Kensignton TurboMouse 5 (needs testing)
  28 * - Mouse Systems A3 mice and trackballs <aidan@kublai.com>
  29 * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it>
  30 *
  31 * To do:
  32 *
  33 * Improve Kensington support.
  34 * Split mouse/kbd
  35 * Move to syfs
  36 */
  37
  38#include <linux/module.h>
  39#include <linux/slab.h>
  40#include <linux/init.h>
  41#include <linux/notifier.h>
  42#include <linux/input.h>
  43
  44#include <linux/adb.h>
  45#include <linux/cuda.h>
  46#include <linux/pmu.h>
  47
  48#include <asm/machdep.h>
  49#ifdef CONFIG_PPC_PMAC
  50#include <asm/backlight.h>
  51#include <asm/pmac_feature.h>
  52#endif
  53
  54MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>");
  55
  56static int restore_capslock_events;
  57module_param(restore_capslock_events, int, 0644);
  58MODULE_PARM_DESC(restore_capslock_events,
  59        "Produce keypress events for capslock on both keyup and keydown.");
  60
  61#define KEYB_KEYREG     0       /* register # for key up/down data */
  62#define KEYB_LEDREG     2       /* register # for leds on ADB keyboard */
  63#define MOUSE_DATAREG   0       /* reg# for movement/button codes from mouse */
  64
  65static int adb_message_handler(struct notifier_block *, unsigned long, void *);
  66static struct notifier_block adbhid_adb_notifier = {
  67        .notifier_call  = adb_message_handler,
  68};
  69
  70/* Some special keys */
  71#define ADB_KEY_DEL             0x33
  72#define ADB_KEY_CMD             0x37
  73#define ADB_KEY_CAPSLOCK        0x39
  74#define ADB_KEY_FN              0x3f
  75#define ADB_KEY_FWDEL           0x75
  76#define ADB_KEY_POWER_OLD       0x7e
  77#define ADB_KEY_POWER           0x7f
  78
  79static const u16 adb_to_linux_keycodes[128] = {
  80        /* 0x00 */ KEY_A,               /*  30 */
  81        /* 0x01 */ KEY_S,               /*  31 */
  82        /* 0x02 */ KEY_D,               /*  32 */
  83        /* 0x03 */ KEY_F,               /*  33 */
  84        /* 0x04 */ KEY_H,               /*  35 */
  85        /* 0x05 */ KEY_G,               /*  34 */
  86        /* 0x06 */ KEY_Z,               /*  44 */
  87        /* 0x07 */ KEY_X,               /*  45 */
  88        /* 0x08 */ KEY_C,               /*  46 */
  89        /* 0x09 */ KEY_V,               /*  47 */
  90        /* 0x0a */ KEY_102ND,           /*  86 */
  91        /* 0x0b */ KEY_B,               /*  48 */
  92        /* 0x0c */ KEY_Q,               /*  16 */
  93        /* 0x0d */ KEY_W,               /*  17 */
  94        /* 0x0e */ KEY_E,               /*  18 */
  95        /* 0x0f */ KEY_R,               /*  19 */
  96        /* 0x10 */ KEY_Y,               /*  21 */
  97        /* 0x11 */ KEY_T,               /*  20 */
  98        /* 0x12 */ KEY_1,               /*   2 */
  99        /* 0x13 */ KEY_2,               /*   3 */
 100        /* 0x14 */ KEY_3,               /*   4 */
 101        /* 0x15 */ KEY_4,               /*   5 */
 102        /* 0x16 */ KEY_6,               /*   7 */
 103        /* 0x17 */ KEY_5,               /*   6 */
 104        /* 0x18 */ KEY_EQUAL,           /*  13 */
 105        /* 0x19 */ KEY_9,               /*  10 */
 106        /* 0x1a */ KEY_7,               /*   8 */
 107        /* 0x1b */ KEY_MINUS,           /*  12 */
 108        /* 0x1c */ KEY_8,               /*   9 */
 109        /* 0x1d */ KEY_0,               /*  11 */
 110        /* 0x1e */ KEY_RIGHTBRACE,      /*  27 */
 111        /* 0x1f */ KEY_O,               /*  24 */
 112        /* 0x20 */ KEY_U,               /*  22 */
 113        /* 0x21 */ KEY_LEFTBRACE,       /*  26 */
 114        /* 0x22 */ KEY_I,               /*  23 */
 115        /* 0x23 */ KEY_P,               /*  25 */
 116        /* 0x24 */ KEY_ENTER,           /*  28 */
 117        /* 0x25 */ KEY_L,               /*  38 */
 118        /* 0x26 */ KEY_J,               /*  36 */
 119        /* 0x27 */ KEY_APOSTROPHE,      /*  40 */
 120        /* 0x28 */ KEY_K,               /*  37 */
 121        /* 0x29 */ KEY_SEMICOLON,       /*  39 */
 122        /* 0x2a */ KEY_BACKSLASH,       /*  43 */
 123        /* 0x2b */ KEY_COMMA,           /*  51 */
 124        /* 0x2c */ KEY_SLASH,           /*  53 */
 125        /* 0x2d */ KEY_N,               /*  49 */
 126        /* 0x2e */ KEY_M,               /*  50 */
 127        /* 0x2f */ KEY_DOT,             /*  52 */
 128        /* 0x30 */ KEY_TAB,             /*  15 */
 129        /* 0x31 */ KEY_SPACE,           /*  57 */
 130        /* 0x32 */ KEY_GRAVE,           /*  41 */
 131        /* 0x33 */ KEY_BACKSPACE,       /*  14 */
 132        /* 0x34 */ KEY_KPENTER,         /*  96 */
 133        /* 0x35 */ KEY_ESC,             /*   1 */
 134        /* 0x36 */ KEY_LEFTCTRL,        /*  29 */
 135        /* 0x37 */ KEY_LEFTMETA,        /* 125 */
 136        /* 0x38 */ KEY_LEFTSHIFT,       /*  42 */
 137        /* 0x39 */ KEY_CAPSLOCK,        /*  58 */
 138        /* 0x3a */ KEY_LEFTALT,         /*  56 */
 139        /* 0x3b */ KEY_LEFT,            /* 105 */
 140        /* 0x3c */ KEY_RIGHT,           /* 106 */
 141        /* 0x3d */ KEY_DOWN,            /* 108 */
 142        /* 0x3e */ KEY_UP,              /* 103 */
 143        /* 0x3f */ KEY_FN,              /* 0x1d0 */
 144        /* 0x40 */ 0,
 145        /* 0x41 */ KEY_KPDOT,           /*  83 */
 146        /* 0x42 */ 0,
 147        /* 0x43 */ KEY_KPASTERISK,      /*  55 */
 148        /* 0x44 */ 0,
 149        /* 0x45 */ KEY_KPPLUS,          /*  78 */
 150        /* 0x46 */ 0,
 151        /* 0x47 */ KEY_NUMLOCK,         /*  69 */
 152        /* 0x48 */ 0,
 153        /* 0x49 */ 0,
 154        /* 0x4a */ 0,
 155        /* 0x4b */ KEY_KPSLASH,         /*  98 */
 156        /* 0x4c */ KEY_KPENTER,         /*  96 */
 157        /* 0x4d */ 0,
 158        /* 0x4e */ KEY_KPMINUS,         /*  74 */
 159        /* 0x4f */ 0,
 160        /* 0x50 */ 0,
 161        /* 0x51 */ KEY_KPEQUAL,         /* 117 */
 162        /* 0x52 */ KEY_KP0,             /*  82 */
 163        /* 0x53 */ KEY_KP1,             /*  79 */
 164        /* 0x54 */ KEY_KP2,             /*  80 */
 165        /* 0x55 */ KEY_KP3,             /*  81 */
 166        /* 0x56 */ KEY_KP4,             /*  75 */
 167        /* 0x57 */ KEY_KP5,             /*  76 */
 168        /* 0x58 */ KEY_KP6,             /*  77 */
 169        /* 0x59 */ KEY_KP7,             /*  71 */
 170        /* 0x5a */ 0,
 171        /* 0x5b */ KEY_KP8,             /*  72 */
 172        /* 0x5c */ KEY_KP9,             /*  73 */
 173        /* 0x5d */ KEY_YEN,             /* 124 */
 174        /* 0x5e */ KEY_RO,              /*  89 */
 175        /* 0x5f */ KEY_KPCOMMA,         /* 121 */
 176        /* 0x60 */ KEY_F5,              /*  63 */
 177        /* 0x61 */ KEY_F6,              /*  64 */
 178        /* 0x62 */ KEY_F7,              /*  65 */
 179        /* 0x63 */ KEY_F3,              /*  61 */
 180        /* 0x64 */ KEY_F8,              /*  66 */
 181        /* 0x65 */ KEY_F9,              /*  67 */
 182        /* 0x66 */ KEY_HANJA,           /* 123 */
 183        /* 0x67 */ KEY_F11,             /*  87 */
 184        /* 0x68 */ KEY_HANGEUL,         /* 122 */
 185        /* 0x69 */ KEY_SYSRQ,           /*  99 */
 186        /* 0x6a */ 0,
 187        /* 0x6b */ KEY_SCROLLLOCK,      /*  70 */
 188        /* 0x6c */ 0,
 189        /* 0x6d */ KEY_F10,             /*  68 */
 190        /* 0x6e */ KEY_COMPOSE,         /* 127 */
 191        /* 0x6f */ KEY_F12,             /*  88 */
 192        /* 0x70 */ 0,
 193        /* 0x71 */ KEY_PAUSE,           /* 119 */
 194        /* 0x72 */ KEY_INSERT,          /* 110 */
 195        /* 0x73 */ KEY_HOME,            /* 102 */
 196        /* 0x74 */ KEY_PAGEUP,          /* 104 */
 197        /* 0x75 */ KEY_DELETE,          /* 111 */
 198        /* 0x76 */ KEY_F4,              /*  62 */
 199        /* 0x77 */ KEY_END,             /* 107 */
 200        /* 0x78 */ KEY_F2,              /*  60 */
 201        /* 0x79 */ KEY_PAGEDOWN,        /* 109 */
 202        /* 0x7a */ KEY_F1,              /*  59 */
 203        /* 0x7b */ KEY_RIGHTSHIFT,      /*  54 */
 204        /* 0x7c */ KEY_RIGHTALT,        /* 100 */
 205        /* 0x7d */ KEY_RIGHTCTRL,       /*  97 */
 206        /* 0x7e */ KEY_RIGHTMETA,       /* 126 */
 207        /* 0x7f */ KEY_POWER,           /* 116 */
 208};
 209
 210struct adbhid {
 211        struct input_dev *input;
 212        int id;
 213        int default_id;
 214        int original_handler_id;
 215        int current_handler_id;
 216        int mouse_kind;
 217        u16 *keycode;
 218        char name[64];
 219        char phys[32];
 220        int flags;
 221};
 222
 223#define FLAG_FN_KEY_PRESSED             0x00000001
 224#define FLAG_POWER_FROM_FN              0x00000002
 225#define FLAG_EMU_FWDEL_DOWN             0x00000004
 226#define FLAG_CAPSLOCK_TRANSLATE         0x00000008
 227#define FLAG_CAPSLOCK_DOWN              0x00000010
 228#define FLAG_CAPSLOCK_IGNORE_NEXT       0x00000020
 229#define FLAG_POWER_KEY_PRESSED          0x00000040
 230
 231static struct adbhid *adbhid[16];
 232
 233static void adbhid_probe(void);
 234
 235static void adbhid_input_keycode(int, int, int);
 236
 237static void init_trackpad(int id);
 238static void init_trackball(int id);
 239static void init_turbomouse(int id);
 240static void init_microspeed(int id);
 241static void init_ms_a3(int id);
 242
 243static struct adb_ids keyboard_ids;
 244static struct adb_ids mouse_ids;
 245static struct adb_ids buttons_ids;
 246
 247/* Kind of keyboard, see Apple technote 1152  */
 248#define ADB_KEYBOARD_UNKNOWN    0
 249#define ADB_KEYBOARD_ANSI       0x0100
 250#define ADB_KEYBOARD_ISO        0x0200
 251#define ADB_KEYBOARD_JIS        0x0300
 252
 253/* Kind of mouse  */
 254#define ADBMOUSE_STANDARD_100   0       /* Standard 100cpi mouse (handler 1) */
 255#define ADBMOUSE_STANDARD_200   1       /* Standard 200cpi mouse (handler 2) */
 256#define ADBMOUSE_EXTENDED       2       /* Apple Extended mouse (handler 4) */
 257#define ADBMOUSE_TRACKBALL      3       /* TrackBall (handler 4) */
 258#define ADBMOUSE_TRACKPAD       4       /* Apple's PowerBook trackpad (handler 4) */
 259#define ADBMOUSE_TURBOMOUSE5    5       /* Turbomouse 5 (previously req. mousehack) */
 260#define ADBMOUSE_MICROSPEED     6       /* Microspeed mouse (&trackball ?), MacPoint */
 261#define ADBMOUSE_TRACKBALLPRO   7       /* Trackball Pro (special buttons) */
 262#define ADBMOUSE_MS_A3          8       /* Mouse systems A3 trackball (handler 3) */
 263#define ADBMOUSE_MACALLY2       9       /* MacAlly 2-button mouse */
 264
 265static void
 266adbhid_keyboard_input(unsigned char *data, int nb, int apoll)
 267{
 268        int id = (data[0] >> 4) & 0x0f;
 269
 270        if (!adbhid[id]) {
 271                pr_err("ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
 272                       id, data[0], data[1], data[2], data[3]);
 273                return;
 274        }
 275
 276        /* first check this is from register 0 */
 277        if (nb != 3 || (data[0] & 3) != KEYB_KEYREG)
 278                return;         /* ignore it */
 279        adbhid_input_keycode(id, data[1], 0);
 280        if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f)))
 281                adbhid_input_keycode(id, data[2], 0);
 282}
 283
 284static void
 285adbhid_input_keycode(int id, int scancode, int repeat)
 286{
 287        struct adbhid *ahid = adbhid[id];
 288        int keycode, up_flag, key;
 289
 290        keycode = scancode & 0x7f;
 291        up_flag = scancode & 0x80;
 292
 293        if (restore_capslock_events) {
 294                if (keycode == ADB_KEY_CAPSLOCK && !up_flag) {
 295                        /* Key pressed, turning on the CapsLock LED.
 296                         * The next 0xff will be interpreted as a release. */
 297                        if (ahid->flags & FLAG_CAPSLOCK_IGNORE_NEXT) {
 298                                /* Throw away this key event if it happens
 299                                 * just after resume. */
 300                                ahid->flags &= ~FLAG_CAPSLOCK_IGNORE_NEXT;
 301                                return;
 302                        } else {
 303                                ahid->flags |= FLAG_CAPSLOCK_TRANSLATE
 304                                        | FLAG_CAPSLOCK_DOWN;
 305                        }
 306                } else if (scancode == 0xff &&
 307                           !(ahid->flags & FLAG_POWER_KEY_PRESSED)) {
 308                        /* Scancode 0xff usually signifies that the capslock
 309                         * key was either pressed or released, or that the
 310                         * power button was released. */
 311                        if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) {
 312                                keycode = ADB_KEY_CAPSLOCK;
 313                                if (ahid->flags & FLAG_CAPSLOCK_DOWN) {
 314                                        /* Key released */
 315                                        up_flag = 1;
 316                                        ahid->flags &= ~FLAG_CAPSLOCK_DOWN;
 317                                } else {
 318                                        /* Key pressed */
 319                                        up_flag = 0;
 320                                        ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE;
 321                                }
 322                        } else {
 323                                pr_info("Spurious caps lock event (scancode 0xff).\n");
 324                        }
 325                }
 326        }
 327
 328        switch (keycode) {
 329        case ADB_KEY_CAPSLOCK:
 330                if (!restore_capslock_events) {
 331                        /* Generate down/up events for CapsLock every time. */
 332                        input_report_key(ahid->input, KEY_CAPSLOCK, 1);
 333                        input_sync(ahid->input);
 334                        input_report_key(ahid->input, KEY_CAPSLOCK, 0);
 335                        input_sync(ahid->input);
 336                        return;
 337                }
 338                break;
 339#ifdef CONFIG_PPC_PMAC
 340        case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
 341                switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 342                        NULL, PMAC_MB_INFO_MODEL, 0)) {
 343                case PMAC_TYPE_COMET:
 344                case PMAC_TYPE_HOOPER:
 345                case PMAC_TYPE_KANGA:
 346                        keycode = ADB_KEY_POWER;
 347                }
 348                break;
 349        case ADB_KEY_POWER:
 350                /* Keep track of the power key state */
 351                if (up_flag)
 352                        ahid->flags &= ~FLAG_POWER_KEY_PRESSED;
 353                else
 354                        ahid->flags |= FLAG_POWER_KEY_PRESSED;
 355
 356                /* Fn + Command will produce a bogus "power" keycode */
 357                if (ahid->flags & FLAG_FN_KEY_PRESSED) {
 358                        keycode = ADB_KEY_CMD;
 359                        if (up_flag)
 360                                ahid->flags &= ~FLAG_POWER_FROM_FN;
 361                        else
 362                                ahid->flags |= FLAG_POWER_FROM_FN;
 363                } else if (ahid->flags & FLAG_POWER_FROM_FN) {
 364                        keycode = ADB_KEY_CMD;
 365                        ahid->flags &= ~FLAG_POWER_FROM_FN;
 366                }
 367                break;
 368        case ADB_KEY_FN:
 369                /* Keep track of the Fn key state */
 370                if (up_flag) {
 371                        ahid->flags &= ~FLAG_FN_KEY_PRESSED;
 372                        /* Emulate Fn+delete = forward delete */
 373                        if (ahid->flags & FLAG_EMU_FWDEL_DOWN) {
 374                                ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
 375                                keycode = ADB_KEY_FWDEL;
 376                                break;
 377                        }
 378                } else
 379                        ahid->flags |= FLAG_FN_KEY_PRESSED;
 380                break;
 381        case ADB_KEY_DEL:
 382                /* Emulate Fn+delete = forward delete */
 383                if (ahid->flags & FLAG_FN_KEY_PRESSED) {
 384                        keycode = ADB_KEY_FWDEL;
 385                        if (up_flag)
 386                                ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
 387                        else
 388                                ahid->flags |= FLAG_EMU_FWDEL_DOWN;
 389                }
 390                break;
 391#endif /* CONFIG_PPC_PMAC */
 392        }
 393
 394        key = adbhid[id]->keycode[keycode];
 395        if (key) {
 396                input_report_key(adbhid[id]->input, key, !up_flag);
 397                input_sync(adbhid[id]->input);
 398        } else
 399                pr_info("Unhandled ADB key (scancode %#02x) %s.\n", keycode,
 400                        up_flag ? "released" : "pressed");
 401
 402}
 403
 404static void
 405adbhid_mouse_input(unsigned char *data, int nb, int autopoll)
 406{
 407        int id = (data[0] >> 4) & 0x0f;
 408
 409        if (!adbhid[id]) {
 410                pr_err("ADB HID on ID %d not yet registered\n", id);
 411                return;
 412        }
 413
 414  /*
 415    Handler 1 -- 100cpi original Apple mouse protocol.
 416    Handler 2 -- 200cpi original Apple mouse protocol.
 417
 418    For Apple's standard one-button mouse protocol the data array will
 419    contain the following values:
 420
 421                BITS    COMMENTS
 422    data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 423    data[1] = bxxx xxxx First button and x-axis motion.
 424    data[2] = byyy yyyy Second button and y-axis motion.
 425
 426    Handler 4 -- Apple Extended mouse protocol.
 427
 428    For Apple's 3-button mouse protocol the data array will contain the
 429    following values:
 430
 431                BITS    COMMENTS
 432    data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 433    data[1] = bxxx xxxx Left button and x-axis motion.
 434    data[2] = byyy yyyy Second button and y-axis motion.
 435    data[3] = byyy bxxx Third button and fourth button.  Y is additional
 436              high bits of y-axis motion.  XY is additional
 437              high bits of x-axis motion.
 438
 439    MacAlly 2-button mouse protocol.
 440
 441    For MacAlly 2-button mouse protocol the data array will contain the
 442    following values:
 443
 444                BITS    COMMENTS
 445    data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 446    data[1] = bxxx xxxx Left button and x-axis motion.
 447    data[2] = byyy yyyy Right button and y-axis motion.
 448    data[3] = ???? ???? unknown
 449    data[4] = ???? ???? unknown
 450
 451  */
 452
 453        /* If it's a trackpad, we alias the second button to the first.
 454           NOTE: Apple sends an ADB flush command to the trackpad when
 455                 the first (the real) button is released. We could do
 456                 this here using async flush requests.
 457        */
 458        switch (adbhid[id]->mouse_kind)
 459        {
 460            case ADBMOUSE_TRACKPAD:
 461                data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80);
 462                data[2] = data[2] | 0x80;
 463                break;
 464            case ADBMOUSE_MICROSPEED:
 465                data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
 466                data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
 467                data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5)
 468                        | (data[3] & 0x08);
 469                break;
 470            case ADBMOUSE_TRACKBALLPRO:
 471                data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5)
 472                        & ((data[3] & 0x08) << 4));
 473                data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7);
 474                data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6);
 475                break;
 476            case ADBMOUSE_MS_A3:
 477                data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
 478                data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
 479                data[3] = ((data[3] & 0x04) << 5);
 480                break;
 481            case ADBMOUSE_MACALLY2:
 482                data[3] = (data[2] & 0x80) ? 0x80 : 0x00;
 483                data[2] |= 0x80;  /* Right button is mapped as button 3 */
 484                nb=4;
 485                break;
 486        }
 487
 488        input_report_key(adbhid[id]->input, BTN_LEFT,   !((data[1] >> 7) & 1));
 489        input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
 490
 491        if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
 492                input_report_key(adbhid[id]->input, BTN_RIGHT,  !((data[3] >> 7) & 1));
 493
 494        input_report_rel(adbhid[id]->input, REL_X,
 495                         ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
 496        input_report_rel(adbhid[id]->input, REL_Y,
 497                         ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
 498
 499        input_sync(adbhid[id]->input);
 500}
 501
 502static void
 503adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
 504{
 505        int id = (data[0] >> 4) & 0x0f;
 506
 507        if (!adbhid[id]) {
 508                pr_err("ADB HID on ID %d not yet registered\n", id);
 509                return;
 510        }
 511
 512        switch (adbhid[id]->original_handler_id) {
 513        default:
 514        case 0x02: /* Adjustable keyboard button device */
 515          {
 516                int down = (data[1] == (data[1] & 0xf));
 517
 518                switch (data[1] & 0x0f) {
 519                case 0x0:       /* microphone */
 520                        input_report_key(adbhid[id]->input, KEY_SOUND, down);
 521                        break;
 522
 523                case 0x1:       /* mute */
 524                        input_report_key(adbhid[id]->input, KEY_MUTE, down);
 525                        break;
 526
 527                case 0x2:       /* volume decrease */
 528                        input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
 529                        break;
 530
 531                case 0x3:       /* volume increase */
 532                        input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
 533                        break;
 534
 535                default:
 536                        pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 537                                data[0], data[1], data[2], data[3]);
 538                        break;
 539                }
 540          }
 541          break;
 542
 543        case 0x1f: /* Powerbook button device */
 544          {
 545                int down = (data[1] == (data[1] & 0xf));
 546
 547                /*
 548                 * XXX: Where is the contrast control for the passive?
 549                 *  -- Cort
 550                 */
 551
 552                switch (data[1] & 0x0f) {
 553                case 0x8:       /* mute */
 554                        input_report_key(adbhid[id]->input, KEY_MUTE, down);
 555                        break;
 556
 557                case 0x7:       /* volume decrease */
 558                        input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
 559                        break;
 560
 561                case 0x6:       /* volume increase */
 562                        input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
 563                        break;
 564
 565                case 0xb:       /* eject */
 566                        input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
 567                        break;
 568
 569                case 0xa:       /* brightness decrease */
 570#ifdef CONFIG_PMAC_BACKLIGHT
 571                        if (down)
 572                                pmac_backlight_key_down();
 573#endif
 574                        input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
 575                        break;
 576
 577                case 0x9:       /* brightness increase */
 578#ifdef CONFIG_PMAC_BACKLIGHT
 579                        if (down)
 580                                pmac_backlight_key_up();
 581#endif
 582                        input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
 583                        break;
 584
 585                case 0xc:       /* videomode switch */
 586                        input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
 587                        break;
 588
 589                case 0xd:       /* keyboard illumination toggle */
 590                        input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
 591                        break;
 592
 593                case 0xe:       /* keyboard illumination decrease */
 594                        input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
 595                        break;
 596
 597                case 0xf:
 598                        switch (data[1]) {
 599                        case 0x8f:
 600                        case 0x0f:
 601                                /* keyboard illumination increase */
 602                                input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
 603                                break;
 604
 605                        case 0x7f:
 606                        case 0xff:
 607                                /* keypad overlay toogle */
 608                                break;
 609
 610                        default:
 611                                pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 612                                        data[0], data[1], data[2], data[3]);
 613                                break;
 614                        }
 615                        break;
 616                default:
 617                        pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 618                                data[0], data[1], data[2], data[3]);
 619                        break;
 620                }
 621          }
 622          break;
 623        }
 624
 625        input_sync(adbhid[id]->input);
 626}
 627
 628static struct adb_request led_request;
 629static int leds_pending[16];
 630static int leds_req_pending;
 631static int pending_devs[16];
 632static int pending_led_start;
 633static int pending_led_end;
 634static DEFINE_SPINLOCK(leds_lock);
 635
 636static void leds_done(struct adb_request *req)
 637{
 638        int leds = 0, device = 0, pending = 0;
 639        unsigned long flags;
 640
 641        spin_lock_irqsave(&leds_lock, flags);
 642
 643        if (pending_led_start != pending_led_end) {
 644                device = pending_devs[pending_led_start];
 645                leds = leds_pending[device] & 0xff;
 646                leds_pending[device] = 0;
 647                pending_led_start++;
 648                pending_led_start = (pending_led_start < 16) ? pending_led_start : 0;
 649                pending = leds_req_pending;
 650        } else
 651                leds_req_pending = 0;
 652        spin_unlock_irqrestore(&leds_lock, flags);
 653        if (pending)
 654                adb_request(&led_request, leds_done, 0, 3,
 655                            ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
 656}
 657
 658static void real_leds(unsigned char leds, int device)
 659{
 660        unsigned long flags;
 661
 662        spin_lock_irqsave(&leds_lock, flags);
 663        if (!leds_req_pending) {
 664                leds_req_pending = 1;
 665                spin_unlock_irqrestore(&leds_lock, flags);             
 666                adb_request(&led_request, leds_done, 0, 3,
 667                            ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
 668                return;
 669        } else {
 670                if (!(leds_pending[device] & 0x100)) {
 671                        pending_devs[pending_led_end] = device;
 672                        pending_led_end++;
 673                        pending_led_end = (pending_led_end < 16) ? pending_led_end : 0;
 674                }
 675                leds_pending[device] = leds | 0x100;
 676        }
 677        spin_unlock_irqrestore(&leds_lock, flags);             
 678}
 679
 680/*
 681 * Event callback from the input module. Events that change the state of
 682 * the hardware are processed here.
 683 */
 684static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 685{
 686        struct adbhid *adbhid = input_get_drvdata(dev);
 687        unsigned char leds;
 688
 689        switch (type) {
 690        case EV_LED:
 691                leds =  (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
 692                        (test_bit(LED_NUML,    dev->led) ? 1 : 0) |
 693                        (test_bit(LED_CAPSL,   dev->led) ? 2 : 0);
 694                real_leds(leds, adbhid->id);
 695                return 0;
 696        }
 697
 698        return -1;
 699}
 700
 701static void
 702adbhid_kbd_capslock_remember(void)
 703{
 704        struct adbhid *ahid;
 705        int i;
 706
 707        for (i = 1; i < 16; i++) {
 708                ahid = adbhid[i];
 709
 710                if (ahid && ahid->id == ADB_KEYBOARD)
 711                        if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE)
 712                                ahid->flags |= FLAG_CAPSLOCK_IGNORE_NEXT;
 713        }
 714}
 715
 716static int
 717adb_message_handler(struct notifier_block *this, unsigned long code, void *x)
 718{
 719        switch (code) {
 720        case ADB_MSG_PRE_RESET:
 721        case ADB_MSG_POWERDOWN:
 722                /* Stop the repeat timer. Autopoll is already off at this point */
 723                {
 724                        int i;
 725                        for (i = 1; i < 16; i++) {
 726                                if (adbhid[i])
 727                                        del_timer_sync(&adbhid[i]->input->timer);
 728                        }
 729                }
 730
 731                /* Stop pending led requests */
 732                while (leds_req_pending)
 733                        adb_poll();
 734
 735                /* After resume, and if the capslock LED is on, the PMU will
 736                 * send a "capslock down" key event. This confuses the
 737                 * restore_capslock_events logic. Remember if the capslock
 738                 * LED was on before suspend so the unwanted key event can
 739                 * be ignored after resume. */
 740                if (restore_capslock_events)
 741                        adbhid_kbd_capslock_remember();
 742
 743                break;
 744
 745        case ADB_MSG_POST_RESET:
 746                adbhid_probe();
 747                break;
 748        }
 749        return NOTIFY_DONE;
 750}
 751
 752static int
 753adbhid_input_register(int id, int default_id, int original_handler_id,
 754                      int current_handler_id, int mouse_kind)
 755{
 756        struct adbhid *hid;
 757        struct input_dev *input_dev;
 758        int err;
 759        int i;
 760        char *keyboard_type;
 761
 762        if (adbhid[id]) {
 763                pr_err("Trying to reregister ADB HID on ID %d\n", id);
 764                return -EEXIST;
 765        }
 766
 767        adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
 768        input_dev = input_allocate_device();
 769        if (!hid || !input_dev) {
 770                err = -ENOMEM;
 771                goto fail;
 772        }
 773
 774        sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
 775
 776        hid->input = input_dev;
 777        hid->id = default_id;
 778        hid->original_handler_id = original_handler_id;
 779        hid->current_handler_id = current_handler_id;
 780        hid->mouse_kind = mouse_kind;
 781        hid->flags = 0;
 782        input_set_drvdata(input_dev, hid);
 783        input_dev->name = hid->name;
 784        input_dev->phys = hid->phys;
 785        input_dev->id.bustype = BUS_ADB;
 786        input_dev->id.vendor = 0x0001;
 787        input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
 788        input_dev->id.version = 0x0100;
 789
 790        switch (default_id) {
 791        case ADB_KEYBOARD:
 792                hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
 793                if (!hid->keycode) {
 794                        err = -ENOMEM;
 795                        goto fail;
 796                }
 797
 798                sprintf(hid->name, "ADB keyboard");
 799
 800                memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
 801
 802                switch (original_handler_id) {
 803                default:
 804                        keyboard_type = "<unknown>";
 805                        input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
 806                        break;
 807
 808                case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
 809                case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
 810                case 0xC0: case 0xC3: case 0xC6:
 811                        keyboard_type = "ANSI";
 812                        input_dev->id.version = ADB_KEYBOARD_ANSI;
 813                        break;
 814
 815                case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
 816                case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
 817                case 0xC4: case 0xC7:
 818                        keyboard_type = "ISO, swapping keys";
 819                        input_dev->id.version = ADB_KEYBOARD_ISO;
 820                        i = hid->keycode[10];
 821                        hid->keycode[10] = hid->keycode[50];
 822                        hid->keycode[50] = i;
 823                        break;
 824
 825                case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
 826                case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
 827                        keyboard_type = "JIS";
 828                        input_dev->id.version = ADB_KEYBOARD_JIS;
 829                        break;
 830                }
 831                pr_info("Detected ADB keyboard, type %s.\n", keyboard_type);
 832
 833                for (i = 0; i < 128; i++)
 834                        if (hid->keycode[i])
 835                                set_bit(hid->keycode[i], input_dev->keybit);
 836
 837                input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) |
 838                        BIT_MASK(EV_REP);
 839                input_dev->ledbit[0] = BIT_MASK(LED_SCROLLL) |
 840                        BIT_MASK(LED_CAPSL) | BIT_MASK(LED_NUML);
 841                input_dev->event = adbhid_kbd_event;
 842                input_dev->keycodemax = KEY_FN;
 843                input_dev->keycodesize = sizeof(hid->keycode[0]);
 844                break;
 845
 846        case ADB_MOUSE:
 847                sprintf(hid->name, "ADB mouse");
 848
 849                input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
 850                input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 851                        BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 852                input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 853                break;
 854
 855        case ADB_MISC:
 856                switch (original_handler_id) {
 857                case 0x02: /* Adjustable keyboard button device */
 858                        sprintf(hid->name, "ADB adjustable keyboard buttons");
 859                        input_dev->evbit[0] = BIT_MASK(EV_KEY) |
 860                                BIT_MASK(EV_REP);
 861                        set_bit(KEY_SOUND, input_dev->keybit);
 862                        set_bit(KEY_MUTE, input_dev->keybit);
 863                        set_bit(KEY_VOLUMEUP, input_dev->keybit);
 864                        set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
 865                        break;
 866                case 0x1f: /* Powerbook button device */
 867                        sprintf(hid->name, "ADB Powerbook buttons");
 868                        input_dev->evbit[0] = BIT_MASK(EV_KEY) |
 869                                BIT_MASK(EV_REP);
 870                        set_bit(KEY_MUTE, input_dev->keybit);
 871                        set_bit(KEY_VOLUMEUP, input_dev->keybit);
 872                        set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
 873                        set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
 874                        set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
 875                        set_bit(KEY_EJECTCD, input_dev->keybit);
 876                        set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
 877                        set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
 878                        set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
 879                        set_bit(KEY_KBDILLUMUP, input_dev->keybit);
 880                        break;
 881                }
 882                if (hid->name[0])
 883                        break;
 884                fallthrough;
 885
 886        default:
 887                pr_info("Trying to register unknown ADB device to input layer.\n");
 888                err = -ENODEV;
 889                goto fail;
 890        }
 891
 892        input_dev->keycode = hid->keycode;
 893
 894        err = input_register_device(input_dev);
 895        if (err)
 896                goto fail;
 897
 898        if (default_id == ADB_KEYBOARD) {
 899                /* HACK WARNING!! This should go away as soon there is an utility
 900                 * to control that for event devices.
 901                 */
 902                input_dev->rep[REP_DELAY] = 500;   /* input layer default: 250 */
 903                input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
 904        }
 905
 906        return 0;
 907
 908 fail:  input_free_device(input_dev);
 909        if (hid) {
 910                kfree(hid->keycode);
 911                kfree(hid);
 912        }
 913        adbhid[id] = NULL;
 914        return err;
 915}
 916
 917static void adbhid_input_unregister(int id)
 918{
 919        input_unregister_device(adbhid[id]->input);
 920        kfree(adbhid[id]->keycode);
 921        kfree(adbhid[id]);
 922        adbhid[id] = NULL;
 923}
 924
 925
 926static u16
 927adbhid_input_reregister(int id, int default_id, int org_handler_id,
 928                        int cur_handler_id, int mk)
 929{
 930        if (adbhid[id]) {
 931                if (adbhid[id]->input->id.product !=
 932                    ((id << 12)|(default_id << 8)|org_handler_id)) {
 933                        adbhid_input_unregister(id);
 934                        adbhid_input_register(id, default_id, org_handler_id,
 935                                              cur_handler_id, mk);
 936                }
 937        } else
 938                adbhid_input_register(id, default_id, org_handler_id,
 939                                      cur_handler_id, mk);
 940        return 1<<id;
 941}
 942
 943static void
 944adbhid_input_devcleanup(u16 exist)
 945{
 946        int i;
 947        for(i=1; i<16; i++)
 948                if (adbhid[i] && !(exist&(1<<i)))
 949                        adbhid_input_unregister(i);
 950}
 951
 952static void
 953adbhid_probe(void)
 954{
 955        struct adb_request req;
 956        int i, default_id, org_handler_id, cur_handler_id;
 957        u16 reg = 0;
 958
 959        adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input);
 960        adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input);
 961        adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input);
 962
 963        for (i = 0; i < keyboard_ids.nids; i++) {
 964                int id = keyboard_ids.id[i];
 965
 966                adb_get_infos(id, &default_id, &org_handler_id);
 967
 968                /* turn off all leds */
 969                adb_request(&req, NULL, ADBREQ_SYNC, 3,
 970                            ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff);
 971
 972                /* Enable full feature set of the keyboard
 973                   ->get it to send separate codes for left and right shift,
 974                   control, option keys */
 975#if 0           /* handler 5 doesn't send separate codes for R modifiers */
 976                if (!adb_try_handler_change(id, 5))
 977#endif
 978                adb_try_handler_change(id, 3);
 979
 980                adb_get_infos(id, &default_id, &cur_handler_id);
 981                printk(KERN_DEBUG "ADB keyboard at %d has handler 0x%X\n",
 982                       id, cur_handler_id);
 983                reg |= adbhid_input_reregister(id, default_id, org_handler_id,
 984                                               cur_handler_id, 0);
 985        }
 986
 987        for (i = 0; i < buttons_ids.nids; i++) {
 988                int id = buttons_ids.id[i];
 989
 990                adb_get_infos(id, &default_id, &org_handler_id);
 991                reg |= adbhid_input_reregister(id, default_id, org_handler_id,
 992                                               org_handler_id, 0);
 993        }
 994
 995        /* Try to switch all mice to handler 4, or 2 for three-button
 996           mode and full resolution. */
 997        for (i = 0; i < mouse_ids.nids; i++) {
 998                int id = mouse_ids.id[i];
 999                int mouse_kind;
1000                char *desc = "standard";
1001
1002                adb_get_infos(id, &default_id, &org_handler_id);
1003
1004                if (adb_try_handler_change(id, 4)) {
1005                        mouse_kind = ADBMOUSE_EXTENDED;
1006                }
1007                else if (adb_try_handler_change(id, 0x2F)) {
1008                        mouse_kind = ADBMOUSE_MICROSPEED;
1009                }
1010                else if (adb_try_handler_change(id, 0x42)) {
1011                        mouse_kind = ADBMOUSE_TRACKBALLPRO;
1012                }
1013                else if (adb_try_handler_change(id, 0x66)) {
1014                        mouse_kind = ADBMOUSE_MICROSPEED;
1015                }
1016                else if (adb_try_handler_change(id, 0x5F)) {
1017                        mouse_kind = ADBMOUSE_MICROSPEED;
1018                }
1019                else if (adb_try_handler_change(id, 3)) {
1020                        mouse_kind = ADBMOUSE_MS_A3;
1021                }
1022                else if (adb_try_handler_change(id, 2)) {
1023                        mouse_kind = ADBMOUSE_STANDARD_200;
1024                }
1025                else {
1026                        mouse_kind = ADBMOUSE_STANDARD_100;
1027                }
1028
1029                if ((mouse_kind == ADBMOUSE_TRACKBALLPRO)
1030                    || (mouse_kind == ADBMOUSE_MICROSPEED)) {
1031                        desc = "Microspeed/MacPoint or compatible";
1032                        init_microspeed(id);
1033                } else if (mouse_kind == ADBMOUSE_MS_A3) {
1034                        desc = "Mouse Systems A3 Mouse or compatible";
1035                        init_ms_a3(id);
1036                } else if (mouse_kind ==  ADBMOUSE_EXTENDED) {
1037                        desc = "extended";
1038                        /*
1039                         * Register 1 is usually used for device
1040                         * identification.  Here, we try to identify
1041                         * a known device and call the appropriate
1042                         * init function.
1043                         */
1044                        adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1045                                    ADB_READREG(id, 1));
1046
1047                        if ((req.reply_len) &&
1048                            (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21)
1049                                || (req.reply[2] == 0x20))) {
1050                                mouse_kind = ADBMOUSE_TRACKBALL;
1051                                desc = "trackman/mouseman";
1052                                init_trackball(id);
1053                        }
1054                        else if ((req.reply_len >= 4) &&
1055                            (req.reply[1] == 0x74) && (req.reply[2] == 0x70) &&
1056                            (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) {
1057                                mouse_kind = ADBMOUSE_TRACKPAD;
1058                                desc = "trackpad";
1059                                init_trackpad(id);
1060                        }
1061                        else if ((req.reply_len >= 4) &&
1062                            (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) &&
1063                            (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) {
1064                                mouse_kind = ADBMOUSE_TURBOMOUSE5;
1065                                desc = "TurboMouse 5";
1066                                init_turbomouse(id);
1067                        }
1068                        else if ((req.reply_len == 9) &&
1069                            (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
1070                            (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
1071                                if (adb_try_handler_change(id, 0x42)) {
1072                                        mouse_kind = ADBMOUSE_MACALLY2;
1073                                        desc = "MacAlly 2-button";
1074                                }
1075                        }
1076                }
1077
1078                adb_get_infos(id, &default_id, &cur_handler_id);
1079                printk(KERN_DEBUG "ADB mouse (%s) at %d has handler 0x%X\n",
1080                       desc, id, cur_handler_id);
1081                reg |= adbhid_input_reregister(id, default_id, org_handler_id,
1082                                               cur_handler_id, mouse_kind);
1083        }
1084        adbhid_input_devcleanup(reg);
1085}
1086
1087static void 
1088init_trackpad(int id)
1089{
1090        struct adb_request req;
1091        unsigned char r1_buffer[8];
1092
1093        adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1094                    ADB_READREG(id,1));
1095        if (req.reply_len < 8)
1096                pr_err("%s: bad length for reg. 1\n", __func__);
1097        else
1098        {
1099            memcpy(r1_buffer, &req.reply[1], 8);
1100
1101            adb_request(&req, NULL, ADBREQ_SYNC, 9,
1102                ADB_WRITEREG(id,1),
1103                    r1_buffer[0],
1104                    r1_buffer[1],
1105                    r1_buffer[2],
1106                    r1_buffer[3],
1107                    r1_buffer[4],
1108                    r1_buffer[5],
1109                    0x0d,
1110                    r1_buffer[7]);
1111
1112            adb_request(&req, NULL, ADBREQ_SYNC, 9,
1113                ADB_WRITEREG(id,2),
1114                    0x99,
1115                    0x94,
1116                    0x19,
1117                    0xff,
1118                    0xb2,
1119                    0x8a,
1120                    0x1b,
1121                    0x50);
1122
1123            adb_request(&req, NULL, ADBREQ_SYNC, 9,
1124                ADB_WRITEREG(id,1),
1125                    r1_buffer[0],
1126                    r1_buffer[1],
1127                    r1_buffer[2],
1128                    r1_buffer[3],
1129                    r1_buffer[4],
1130                    r1_buffer[5],
1131                    0x03, /*r1_buffer[6],*/
1132                    r1_buffer[7]);
1133
1134            /* Without this flush, the trackpad may be locked up */
1135            adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1136        }
1137}
1138
1139static void 
1140init_trackball(int id)
1141{
1142        struct adb_request req;
1143
1144        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1145        ADB_WRITEREG(id,1), 00,0x81);
1146
1147        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1148        ADB_WRITEREG(id,1), 01,0x81);
1149
1150        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1151        ADB_WRITEREG(id,1), 02,0x81);
1152
1153        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1154        ADB_WRITEREG(id,1), 03,0x38);
1155
1156        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1157        ADB_WRITEREG(id,1), 00,0x81);
1158
1159        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1160        ADB_WRITEREG(id,1), 01,0x81);
1161
1162        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1163        ADB_WRITEREG(id,1), 02,0x81);
1164
1165        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1166        ADB_WRITEREG(id,1), 03,0x38);
1167}
1168
1169static void
1170init_turbomouse(int id)
1171{
1172        struct adb_request req;
1173
1174        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1175
1176        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1177
1178        adb_request(&req, NULL, ADBREQ_SYNC, 9,
1179        ADB_WRITEREG(3,2),
1180            0xe7,
1181            0x8c,
1182            0,
1183            0,
1184            0,
1185            0xff,
1186            0xff,
1187            0x94);
1188
1189        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1190
1191        adb_request(&req, NULL, ADBREQ_SYNC, 9,
1192        ADB_WRITEREG(3,2),
1193            0xa5,
1194            0x14,
1195            0,
1196            0,
1197            0x69,
1198            0xff,
1199            0xff,
1200            0x27);
1201}
1202
1203static void
1204init_microspeed(int id)
1205{
1206        struct adb_request req;
1207
1208        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1209
1210        /* This will initialize mice using the Microspeed, MacPoint and
1211           other compatible firmware. Bit 12 enables extended protocol.
1212           
1213           Register 1 Listen (4 Bytes)
1214            0 -  3     Button is mouse (set also for double clicking!!!)
1215            4 -  7     Button is locking (affects change speed also)
1216            8 - 11     Button changes speed
1217           12          1 = Extended mouse mode, 0 = normal mouse mode
1218           13 - 15     unused 0
1219           16 - 23     normal speed
1220           24 - 31     changed speed
1221
1222       Register 1 talk holds version and product identification information.
1223       Register 1 Talk (4 Bytes):
1224            0 -  7     Product code
1225            8 - 23     undefined, reserved
1226           24 - 31     Version number
1227        
1228       Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max.
1229 */
1230        adb_request(&req, NULL, ADBREQ_SYNC, 5,
1231        ADB_WRITEREG(id,1),
1232            0x20,       /* alt speed = 0x20 (rather slow) */
1233            0x00,       /* norm speed = 0x00 (fastest) */
1234            0x10,       /* extended protocol, no speed change */
1235            0x07);      /* all buttons enabled as mouse buttons, no locking */
1236
1237
1238        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1239}
1240
1241static void
1242init_ms_a3(int id)
1243{
1244        struct adb_request req;
1245
1246        adb_request(&req, NULL, ADBREQ_SYNC, 3,
1247        ADB_WRITEREG(id, 0x2),
1248            0x00,
1249            0x07);
1250 
1251        adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1252}
1253
1254static int __init adbhid_init(void)
1255{
1256#ifndef CONFIG_MAC
1257        if (!machine_is(chrp) && !machine_is(powermac))
1258                return 0;
1259#endif
1260
1261        led_request.complete = 1;
1262
1263        adbhid_probe();
1264
1265        blocking_notifier_chain_register(&adb_client_list,
1266                        &adbhid_adb_notifier);
1267
1268        return 0;
1269}
1270
1271static void __exit adbhid_exit(void)
1272{
1273}
1274 
1275module_init(adbhid_init);
1276module_exit(adbhid_exit);
1277