linux/drivers/media/i2c/tvp5150.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2//
   3// tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver
   4//
   5// Copyright (c) 2005,2006 Mauro Carvalho Chehab <mchehab@kernel.org>
   6
   7#include <dt-bindings/media/tvp5150.h>
   8#include <linux/i2c.h>
   9#include <linux/slab.h>
  10#include <linux/videodev2.h>
  11#include <linux/delay.h>
  12#include <linux/gpio/consumer.h>
  13#include <linux/interrupt.h>
  14#include <linux/module.h>
  15#include <linux/of_graph.h>
  16#include <linux/pm_runtime.h>
  17#include <linux/regmap.h>
  18#include <media/v4l2-async.h>
  19#include <media/v4l2-device.h>
  20#include <media/v4l2-event.h>
  21#include <media/v4l2-ctrls.h>
  22#include <media/v4l2-fwnode.h>
  23#include <media/v4l2-mc.h>
  24#include <media/v4l2-rect.h>
  25
  26#include "tvp5150_reg.h"
  27
  28#define TVP5150_H_MAX           720U
  29#define TVP5150_V_MAX_525_60    480U
  30#define TVP5150_V_MAX_OTHERS    576U
  31#define TVP5150_MAX_CROP_LEFT   511
  32#define TVP5150_MAX_CROP_TOP    127
  33#define TVP5150_CROP_SHIFT      2
  34#define TVP5150_MBUS_FMT        MEDIA_BUS_FMT_UYVY8_2X8
  35#define TVP5150_FIELD           V4L2_FIELD_ALTERNATE
  36#define TVP5150_COLORSPACE      V4L2_COLORSPACE_SMPTE170M
  37#define TVP5150_STD_MASK        (V4L2_STD_NTSC     | \
  38                                 V4L2_STD_NTSC_443 | \
  39                                 V4L2_STD_PAL      | \
  40                                 V4L2_STD_PAL_M    | \
  41                                 V4L2_STD_PAL_N    | \
  42                                 V4L2_STD_PAL_Nc   | \
  43                                 V4L2_STD_SECAM)
  44
  45#define TVP5150_MAX_CONNECTORS  3 /* Check dt-bindings for more information */
  46
  47MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
  48MODULE_AUTHOR("Mauro Carvalho Chehab");
  49MODULE_LICENSE("GPL v2");
  50
  51
  52static int debug;
  53module_param(debug, int, 0644);
  54MODULE_PARM_DESC(debug, "Debug level (0-2)");
  55
  56#define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
  57
  58enum tvp5150_pads {
  59        TVP5150_PAD_AIP1A,
  60        TVP5150_PAD_AIP1B,
  61        TVP5150_PAD_VID_OUT,
  62        TVP5150_NUM_PADS
  63};
  64
  65struct tvp5150_connector {
  66        struct v4l2_fwnode_connector base;
  67        struct media_entity ent;
  68        struct media_pad pad;
  69};
  70
  71struct tvp5150 {
  72        struct v4l2_subdev sd;
  73
  74        struct media_pad pads[TVP5150_NUM_PADS];
  75        struct tvp5150_connector connectors[TVP5150_MAX_CONNECTORS];
  76        struct tvp5150_connector *cur_connector;
  77        unsigned int connectors_num;
  78
  79        struct v4l2_ctrl_handler hdl;
  80        struct v4l2_rect rect;
  81        struct regmap *regmap;
  82        int irq;
  83
  84        v4l2_std_id norm;       /* Current set standard */
  85        v4l2_std_id detected_norm;
  86        u32 input;
  87        u32 output;
  88        u32 oe;
  89        int enable;
  90        bool lock;
  91
  92        u16 dev_id;
  93        u16 rom_ver;
  94
  95        enum v4l2_mbus_type mbus_type;
  96};
  97
  98static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
  99{
 100        return container_of(sd, struct tvp5150, sd);
 101}
 102
 103static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
 104{
 105        return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
 106}
 107
 108static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
 109{
 110        struct tvp5150 *decoder = to_tvp5150(sd);
 111        int ret, val;
 112
 113        ret = regmap_read(decoder->regmap, addr, &val);
 114        if (ret < 0)
 115                return ret;
 116
 117        return val;
 118}
 119
 120static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
 121                                const u8 end, int max_line)
 122{
 123        u8 buf[16];
 124        int i = 0, j, len;
 125
 126        if (max_line > 16) {
 127                dprintk0(sd->dev, "too much data to dump\n");
 128                return;
 129        }
 130
 131        for (i = init; i < end; i += max_line) {
 132                len = (end - i > max_line) ? max_line : end - i;
 133
 134                for (j = 0; j < len; j++)
 135                        buf[j] = tvp5150_read(sd, i + j);
 136
 137                dprintk0(sd->dev, "%s reg %02x = %*ph\n", s, i, len, buf);
 138        }
 139}
 140
 141static int tvp5150_log_status(struct v4l2_subdev *sd)
 142{
 143        dprintk0(sd->dev, "tvp5150: Video input source selection #1 = 0x%02x\n",
 144                tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
 145        dprintk0(sd->dev, "tvp5150: Analog channel controls = 0x%02x\n",
 146                tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
 147        dprintk0(sd->dev, "tvp5150: Operation mode controls = 0x%02x\n",
 148                tvp5150_read(sd, TVP5150_OP_MODE_CTL));
 149        dprintk0(sd->dev, "tvp5150: Miscellaneous controls = 0x%02x\n",
 150                tvp5150_read(sd, TVP5150_MISC_CTL));
 151        dprintk0(sd->dev, "tvp5150: Autoswitch mask= 0x%02x\n",
 152                tvp5150_read(sd, TVP5150_AUTOSW_MSK));
 153        dprintk0(sd->dev, "tvp5150: Color killer threshold control = 0x%02x\n",
 154                tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
 155        dprintk0(sd->dev, "tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
 156                tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
 157                tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
 158                tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
 159        dprintk0(sd->dev, "tvp5150: Brightness control = 0x%02x\n",
 160                tvp5150_read(sd, TVP5150_BRIGHT_CTL));
 161        dprintk0(sd->dev, "tvp5150: Color saturation control = 0x%02x\n",
 162                tvp5150_read(sd, TVP5150_SATURATION_CTL));
 163        dprintk0(sd->dev, "tvp5150: Hue control = 0x%02x\n",
 164                tvp5150_read(sd, TVP5150_HUE_CTL));
 165        dprintk0(sd->dev, "tvp5150: Contrast control = 0x%02x\n",
 166                tvp5150_read(sd, TVP5150_CONTRAST_CTL));
 167        dprintk0(sd->dev, "tvp5150: Outputs and data rates select = 0x%02x\n",
 168                tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
 169        dprintk0(sd->dev, "tvp5150: Configuration shared pins = 0x%02x\n",
 170                tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
 171        dprintk0(sd->dev, "tvp5150: Active video cropping start = 0x%02x%02x\n",
 172                tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
 173                tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
 174        dprintk0(sd->dev, "tvp5150: Active video cropping stop  = 0x%02x%02x\n",
 175                tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
 176                tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
 177        dprintk0(sd->dev, "tvp5150: Genlock/RTC = 0x%02x\n",
 178                tvp5150_read(sd, TVP5150_GENLOCK));
 179        dprintk0(sd->dev, "tvp5150: Horizontal sync start = 0x%02x\n",
 180                tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
 181        dprintk0(sd->dev, "tvp5150: Vertical blanking start = 0x%02x\n",
 182                tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
 183        dprintk0(sd->dev, "tvp5150: Vertical blanking stop = 0x%02x\n",
 184                tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
 185        dprintk0(sd->dev, "tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
 186                tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
 187                tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
 188        dprintk0(sd->dev, "tvp5150: Interrupt reset register B = 0x%02x\n",
 189                tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
 190        dprintk0(sd->dev, "tvp5150: Interrupt enable register B = 0x%02x\n",
 191                tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
 192        dprintk0(sd->dev, "tvp5150: Interrupt configuration register B = 0x%02x\n",
 193                tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
 194        dprintk0(sd->dev, "tvp5150: Video standard = 0x%02x\n",
 195                tvp5150_read(sd, TVP5150_VIDEO_STD));
 196        dprintk0(sd->dev, "tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
 197                tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
 198                tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
 199        dprintk0(sd->dev, "tvp5150: Macrovision on counter = 0x%02x\n",
 200                tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
 201        dprintk0(sd->dev, "tvp5150: Macrovision off counter = 0x%02x\n",
 202                tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
 203        dprintk0(sd->dev, "tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
 204                (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
 205        dprintk0(sd->dev, "tvp5150: Device ID = %02x%02x\n",
 206                tvp5150_read(sd, TVP5150_MSB_DEV_ID),
 207                tvp5150_read(sd, TVP5150_LSB_DEV_ID));
 208        dprintk0(sd->dev, "tvp5150: ROM version = (hex) %02x.%02x\n",
 209                tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
 210                tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
 211        dprintk0(sd->dev, "tvp5150: Vertical line count = 0x%02x%02x\n",
 212                tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
 213                tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
 214        dprintk0(sd->dev, "tvp5150: Interrupt status register B = 0x%02x\n",
 215                tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
 216        dprintk0(sd->dev, "tvp5150: Interrupt active register B = 0x%02x\n",
 217                tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
 218        dprintk0(sd->dev, "tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
 219                tvp5150_read(sd, TVP5150_STATUS_REG_1),
 220                tvp5150_read(sd, TVP5150_STATUS_REG_2),
 221                tvp5150_read(sd, TVP5150_STATUS_REG_3),
 222                tvp5150_read(sd, TVP5150_STATUS_REG_4),
 223                tvp5150_read(sd, TVP5150_STATUS_REG_5));
 224
 225        dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
 226                        TVP5150_TELETEXT_FIL1_END, 8);
 227        dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
 228                        TVP5150_TELETEXT_FIL2_END, 8);
 229
 230        dprintk0(sd->dev, "tvp5150: Teletext filter enable = 0x%02x\n",
 231                tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
 232        dprintk0(sd->dev, "tvp5150: Interrupt status register A = 0x%02x\n",
 233                tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
 234        dprintk0(sd->dev, "tvp5150: Interrupt enable register A = 0x%02x\n",
 235                tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
 236        dprintk0(sd->dev, "tvp5150: Interrupt configuration = 0x%02x\n",
 237                tvp5150_read(sd, TVP5150_INT_CONF));
 238        dprintk0(sd->dev, "tvp5150: VDP status register = 0x%02x\n",
 239                tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
 240        dprintk0(sd->dev, "tvp5150: FIFO word count = 0x%02x\n",
 241                tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
 242        dprintk0(sd->dev, "tvp5150: FIFO interrupt threshold = 0x%02x\n",
 243                tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
 244        dprintk0(sd->dev, "tvp5150: FIFO reset = 0x%02x\n",
 245                tvp5150_read(sd, TVP5150_FIFO_RESET));
 246        dprintk0(sd->dev, "tvp5150: Line number interrupt = 0x%02x\n",
 247                tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
 248        dprintk0(sd->dev, "tvp5150: Pixel alignment register = 0x%02x%02x\n",
 249                tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
 250                tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
 251        dprintk0(sd->dev, "tvp5150: FIFO output control = 0x%02x\n",
 252                tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
 253        dprintk0(sd->dev, "tvp5150: Full field enable = 0x%02x\n",
 254                tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
 255        dprintk0(sd->dev, "tvp5150: Full field mode register = 0x%02x\n",
 256                tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
 257
 258        dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
 259                        TVP5150_CC_DATA_END, 8);
 260
 261        dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
 262                        TVP5150_WSS_DATA_END, 8);
 263
 264        dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
 265                        TVP5150_VPS_DATA_END, 8);
 266
 267        dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
 268                        TVP5150_VITC_DATA_END, 10);
 269
 270        dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
 271                        TVP5150_LINE_MODE_END, 8);
 272        return 0;
 273}
 274
 275/****************************************************************************
 276                        Basic functions
 277 ****************************************************************************/
 278
 279static void tvp5150_selmux(struct v4l2_subdev *sd)
 280{
 281        int opmode = 0;
 282        struct tvp5150 *decoder = to_tvp5150(sd);
 283        unsigned int mask, val;
 284        int input = 0;
 285
 286        /* Only tvp5150am1 and tvp5151 have signal generator support */
 287        if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||
 288            (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {
 289                if (!decoder->enable)
 290                        input = 8;
 291        }
 292
 293        switch (decoder->input) {
 294        case TVP5150_COMPOSITE1:
 295                input |= 2;
 296                fallthrough;
 297        case TVP5150_COMPOSITE0:
 298                break;
 299        case TVP5150_SVIDEO:
 300        default:
 301                input |= 1;
 302                break;
 303        }
 304
 305        dev_dbg_lvl(sd->dev, 1, debug,
 306                    "Selecting video route: route input=%s, output=%s => tvp5150 input=0x%02x, opmode=0x%02x\n",
 307                    decoder->input == 0 ? "aip1a" :
 308                    decoder->input == 2 ? "aip1b" : "svideo",
 309                    decoder->output == 0 ? "normal" : "black-frame-gen",
 310                    input, opmode);
 311
 312        regmap_write(decoder->regmap, TVP5150_OP_MODE_CTL, opmode);
 313        regmap_write(decoder->regmap, TVP5150_VD_IN_SRC_SEL_1, input);
 314
 315        /*
 316         * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
 317         * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
 318         * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
 319         * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
 320         * INTREQ/GPCL/VBLK to logic 1.
 321         */
 322        mask = TVP5150_MISC_CTL_GPCL | TVP5150_MISC_CTL_HVLK;
 323        if (decoder->input == TVP5150_SVIDEO)
 324                val = TVP5150_MISC_CTL_HVLK;
 325        else
 326                val = TVP5150_MISC_CTL_GPCL;
 327        regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);
 328};
 329
 330struct i2c_reg_value {
 331        unsigned char reg;
 332        unsigned char value;
 333};
 334
 335/* Default values as sugested at TVP5150AM1 datasheet */
 336static const struct i2c_reg_value tvp5150_init_default[] = {
 337        { /* 0x00 */
 338                TVP5150_VD_IN_SRC_SEL_1, 0x00
 339        },
 340        { /* 0x01 */
 341                TVP5150_ANAL_CHL_CTL, 0x15
 342        },
 343        { /* 0x02 */
 344                TVP5150_OP_MODE_CTL, 0x00
 345        },
 346        { /* 0x03 */
 347                TVP5150_MISC_CTL, 0x01
 348        },
 349        { /* 0x06 */
 350                TVP5150_COLOR_KIL_THSH_CTL, 0x10
 351        },
 352        { /* 0x07 */
 353                TVP5150_LUMA_PROC_CTL_1, 0x60
 354        },
 355        { /* 0x08 */
 356                TVP5150_LUMA_PROC_CTL_2, 0x00
 357        },
 358        { /* 0x09 */
 359                TVP5150_BRIGHT_CTL, 0x80
 360        },
 361        { /* 0x0a */
 362                TVP5150_SATURATION_CTL, 0x80
 363        },
 364        { /* 0x0b */
 365                TVP5150_HUE_CTL, 0x00
 366        },
 367        { /* 0x0c */
 368                TVP5150_CONTRAST_CTL, 0x80
 369        },
 370        { /* 0x0d */
 371                TVP5150_DATA_RATE_SEL, 0x47
 372        },
 373        { /* 0x0e */
 374                TVP5150_LUMA_PROC_CTL_3, 0x00
 375        },
 376        { /* 0x0f */
 377                TVP5150_CONF_SHARED_PIN, 0x08
 378        },
 379        { /* 0x11 */
 380                TVP5150_ACT_VD_CROP_ST_MSB, 0x00
 381        },
 382        { /* 0x12 */
 383                TVP5150_ACT_VD_CROP_ST_LSB, 0x00
 384        },
 385        { /* 0x13 */
 386                TVP5150_ACT_VD_CROP_STP_MSB, 0x00
 387        },
 388        { /* 0x14 */
 389                TVP5150_ACT_VD_CROP_STP_LSB, 0x00
 390        },
 391        { /* 0x15 */
 392                TVP5150_GENLOCK, 0x01
 393        },
 394        { /* 0x16 */
 395                TVP5150_HORIZ_SYNC_START, 0x80
 396        },
 397        { /* 0x18 */
 398                TVP5150_VERT_BLANKING_START, 0x00
 399        },
 400        { /* 0x19 */
 401                TVP5150_VERT_BLANKING_STOP, 0x00
 402        },
 403        { /* 0x1a */
 404                TVP5150_CHROMA_PROC_CTL_1, 0x0c
 405        },
 406        { /* 0x1b */
 407                TVP5150_CHROMA_PROC_CTL_2, 0x14
 408        },
 409        { /* 0x1c */
 410                TVP5150_INT_RESET_REG_B, 0x00
 411        },
 412        { /* 0x1d */
 413                TVP5150_INT_ENABLE_REG_B, 0x00
 414        },
 415        { /* 0x1e */
 416                TVP5150_INTT_CONFIG_REG_B, 0x00
 417        },
 418        { /* 0x28 */
 419                TVP5150_VIDEO_STD, 0x00
 420        },
 421        { /* 0x2e */
 422                TVP5150_MACROVISION_ON_CTR, 0x0f
 423        },
 424        { /* 0x2f */
 425                TVP5150_MACROVISION_OFF_CTR, 0x01
 426        },
 427        { /* 0xbb */
 428                TVP5150_TELETEXT_FIL_ENA, 0x00
 429        },
 430        { /* 0xc0 */
 431                TVP5150_INT_STATUS_REG_A, 0x00
 432        },
 433        { /* 0xc1 */
 434                TVP5150_INT_ENABLE_REG_A, 0x00
 435        },
 436        { /* 0xc2 */
 437                TVP5150_INT_CONF, 0x04
 438        },
 439        { /* 0xc8 */
 440                TVP5150_FIFO_INT_THRESHOLD, 0x80
 441        },
 442        { /* 0xc9 */
 443                TVP5150_FIFO_RESET, 0x00
 444        },
 445        { /* 0xca */
 446                TVP5150_LINE_NUMBER_INT, 0x00
 447        },
 448        { /* 0xcb */
 449                TVP5150_PIX_ALIGN_REG_LOW, 0x4e
 450        },
 451        { /* 0xcc */
 452                TVP5150_PIX_ALIGN_REG_HIGH, 0x00
 453        },
 454        { /* 0xcd */
 455                TVP5150_FIFO_OUT_CTRL, 0x01
 456        },
 457        { /* 0xcf */
 458                TVP5150_FULL_FIELD_ENA, 0x00
 459        },
 460        { /* 0xd0 */
 461                TVP5150_LINE_MODE_INI, 0x00
 462        },
 463        { /* 0xfc */
 464                TVP5150_FULL_FIELD_MODE_REG, 0x7f
 465        },
 466        { /* end of data */
 467                0xff, 0xff
 468        }
 469};
 470
 471/* Default values as sugested at TVP5150AM1 datasheet */
 472static const struct i2c_reg_value tvp5150_init_enable[] = {
 473        {       /* Automatic offset and AGC enabled */
 474                TVP5150_ANAL_CHL_CTL, 0x15
 475        }, {    /* Activate YCrCb output 0x9 or 0xd ? */
 476                TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
 477                                  TVP5150_MISC_CTL_INTREQ_OE |
 478                                  TVP5150_MISC_CTL_YCBCR_OE |
 479                                  TVP5150_MISC_CTL_SYNC_OE |
 480                                  TVP5150_MISC_CTL_VBLANK |
 481                                  TVP5150_MISC_CTL_CLOCK_OE,
 482        }, {    /* Activates video std autodetection for all standards */
 483                TVP5150_AUTOSW_MSK, 0x0
 484        }, {    /* Default format: 0x47. For 4:2:2: 0x40 */
 485                TVP5150_DATA_RATE_SEL, 0x47
 486        }, {
 487                TVP5150_CHROMA_PROC_CTL_1, 0x0c
 488        }, {
 489                TVP5150_CHROMA_PROC_CTL_2, 0x54
 490        }, {    /* Non documented, but initialized on WinTV USB2 */
 491                0x27, 0x20
 492        }, {
 493                0xff, 0xff
 494        }
 495};
 496
 497struct tvp5150_vbi_type {
 498        unsigned int vbi_type;
 499        unsigned int ini_line;
 500        unsigned int end_line;
 501        unsigned int by_field :1;
 502};
 503
 504struct i2c_vbi_ram_value {
 505        u16 reg;
 506        struct tvp5150_vbi_type type;
 507        unsigned char values[16];
 508};
 509
 510/* This struct have the values for each supported VBI Standard
 511 * by
 512 tvp5150_vbi_types should follow the same order as vbi_ram_default
 513 * value 0 means rom position 0x10, value 1 means rom position 0x30
 514 * and so on. There are 16 possible locations from 0 to 15.
 515 */
 516
 517static struct i2c_vbi_ram_value vbi_ram_default[] = {
 518
 519        /*
 520         * FIXME: Current api doesn't handle all VBI types, those not
 521         * yet supported are placed under #if 0
 522         */
 523#if 0
 524        [0] = {0x010, /* Teletext, SECAM, WST System A */
 525                {V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1},
 526                { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
 527                  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
 528        },
 529#endif
 530        [1] = {0x030, /* Teletext, PAL, WST System B */
 531                {V4L2_SLICED_TELETEXT_B, 6, 22, 1},
 532                { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
 533                  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
 534        },
 535#if 0
 536        [2] = {0x050, /* Teletext, PAL, WST System C */
 537                {V4L2_SLICED_TELETEXT_PAL_C, 6, 22, 1},
 538                { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 539                  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 540        },
 541        [3] = {0x070, /* Teletext, NTSC, WST System B */
 542                {V4L2_SLICED_TELETEXT_NTSC_B, 10, 21, 1},
 543                { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
 544                  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 545        },
 546        [4] = {0x090, /* Tetetext, NTSC NABTS System C */
 547                {V4L2_SLICED_TELETEXT_NTSC_C, 10, 21, 1},
 548                { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 549                  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
 550        },
 551        [5] = {0x0b0, /* Teletext, NTSC-J, NABTS System D */
 552                {V4L2_SLICED_TELETEXT_NTSC_D, 10, 21, 1},
 553                { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
 554                  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 555        },
 556        [6] = {0x0d0, /* Closed Caption, PAL/SECAM */
 557                {V4L2_SLICED_CAPTION_625, 22, 22, 1},
 558                { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 559                  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 560        },
 561#endif
 562        [7] = {0x0f0, /* Closed Caption, NTSC */
 563                {V4L2_SLICED_CAPTION_525, 21, 21, 1},
 564                { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 565                  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 566        },
 567        [8] = {0x110, /* Wide Screen Signal, PAL/SECAM */
 568                {V4L2_SLICED_WSS_625, 23, 23, 1},
 569                { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
 570                  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
 571        },
 572#if 0
 573        [9] = {0x130, /* Wide Screen Signal, NTSC C */
 574                {V4L2_SLICED_WSS_525, 20, 20, 1},
 575                { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
 576                  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
 577        },
 578        [10] = {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
 579                {V4l2_SLICED_VITC_625, 6, 22, 0},
 580                { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 581                  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 582        },
 583        [11] = {0x170, /* Vertical Interval Timecode (VITC), NTSC */
 584                {V4l2_SLICED_VITC_525, 10, 20, 0},
 585                { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 586                  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 587        },
 588#endif
 589        [12] = {0x190, /* Video Program System (VPS), PAL */
 590                {V4L2_SLICED_VPS, 16, 16, 0},
 591                { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
 592                  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
 593        },
 594        /* 0x1d0 User programmable */
 595};
 596
 597static int tvp5150_write_inittab(struct v4l2_subdev *sd,
 598                                const struct i2c_reg_value *regs)
 599{
 600        struct tvp5150 *decoder = to_tvp5150(sd);
 601
 602        while (regs->reg != 0xff) {
 603                regmap_write(decoder->regmap, regs->reg, regs->value);
 604                regs++;
 605        }
 606        return 0;
 607}
 608
 609static int tvp5150_vdp_init(struct v4l2_subdev *sd)
 610{
 611        struct tvp5150 *decoder = to_tvp5150(sd);
 612        struct regmap *map = decoder->regmap;
 613        unsigned int i;
 614        int j;
 615
 616        /* Disable Full Field */
 617        regmap_write(map, TVP5150_FULL_FIELD_ENA, 0);
 618
 619        /* Before programming, Line mode should be at 0xff */
 620        for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
 621                regmap_write(map, i, 0xff);
 622
 623        /* Load Ram Table */
 624        for (j = 0; j < ARRAY_SIZE(vbi_ram_default); j++) {
 625                const struct i2c_vbi_ram_value *regs = &vbi_ram_default[j];
 626
 627                if (!regs->type.vbi_type)
 628                        continue;
 629
 630                regmap_write(map, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
 631                regmap_write(map, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
 632
 633                for (i = 0; i < 16; i++)
 634                        regmap_write(map, TVP5150_VDP_CONF_RAM_DATA,
 635                                     regs->values[i]);
 636        }
 637        return 0;
 638}
 639
 640/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
 641static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
 642                                struct v4l2_sliced_vbi_cap *cap)
 643{
 644        int line, i;
 645
 646        dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
 647        memset(cap, 0, sizeof(*cap));
 648
 649        for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
 650                const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];
 651
 652                if (!regs->type.vbi_type)
 653                        continue;
 654
 655                for (line = regs->type.ini_line;
 656                     line <= regs->type.end_line;
 657                     line++) {
 658                        cap->service_lines[0][line] |= regs->type.vbi_type;
 659                }
 660                cap->service_set |= regs->type.vbi_type;
 661        }
 662        return 0;
 663}
 664
 665/* Set vbi processing
 666 * type - one of tvp5150_vbi_types
 667 * line - line to gather data
 668 * fields: bit 0 field1, bit 1, field2
 669 * flags (default=0xf0) is a bitmask, were set means:
 670 *      bit 7: enable filtering null bytes on CC
 671 *      bit 6: send data also to FIFO
 672 *      bit 5: don't allow data with errors on FIFO
 673 *      bit 4: enable ECC when possible
 674 * pix_align = pix alignment:
 675 *      LSB = field1
 676 *      MSB = field2
 677 */
 678static int tvp5150_set_vbi(struct v4l2_subdev *sd,
 679                        unsigned int type, u8 flags, int line,
 680                        const int fields)
 681{
 682        struct tvp5150 *decoder = to_tvp5150(sd);
 683        v4l2_std_id std = decoder->norm;
 684        u8 reg;
 685        int i, pos = 0;
 686
 687        if (std == V4L2_STD_ALL) {
 688                dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
 689                return 0;
 690        } else if (std & V4L2_STD_625_50) {
 691                /* Don't follow NTSC Line number convension */
 692                line += 3;
 693        }
 694
 695        if (line < 6 || line > 27)
 696                return 0;
 697
 698        for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
 699                const struct i2c_vbi_ram_value *regs =  &vbi_ram_default[i];
 700
 701                if (!regs->type.vbi_type)
 702                        continue;
 703
 704                if ((type & regs->type.vbi_type) &&
 705                    (line >= regs->type.ini_line) &&
 706                    (line <= regs->type.end_line))
 707                        break;
 708                pos++;
 709        }
 710
 711        type = pos | (flags & 0xf0);
 712        reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
 713
 714        if (fields & 1)
 715                regmap_write(decoder->regmap, reg, type);
 716
 717        if (fields & 2)
 718                regmap_write(decoder->regmap, reg + 1, type);
 719
 720        return type;
 721}
 722
 723static int tvp5150_get_vbi(struct v4l2_subdev *sd, int line)
 724{
 725        struct tvp5150 *decoder = to_tvp5150(sd);
 726        v4l2_std_id std = decoder->norm;
 727        u8 reg;
 728        int pos, type = 0;
 729        int i, ret = 0;
 730
 731        if (std == V4L2_STD_ALL) {
 732                dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
 733                return 0;
 734        } else if (std & V4L2_STD_625_50) {
 735                /* Don't follow NTSC Line number convension */
 736                line += 3;
 737        }
 738
 739        if (line < 6 || line > 27)
 740                return 0;
 741
 742        reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
 743
 744        for (i = 0; i <= 1; i++) {
 745                ret = tvp5150_read(sd, reg + i);
 746                if (ret < 0) {
 747                        dev_err(sd->dev, "%s: failed with error = %d\n",
 748                                 __func__, ret);
 749                        return 0;
 750                }
 751                pos = ret & 0x0f;
 752                if (pos < ARRAY_SIZE(vbi_ram_default))
 753                        type |= vbi_ram_default[pos].type.vbi_type;
 754        }
 755
 756        return type;
 757}
 758
 759static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
 760{
 761        struct tvp5150 *decoder = to_tvp5150(sd);
 762        int fmt = 0;
 763
 764        /* First tests should be against specific std */
 765
 766        if (std == V4L2_STD_NTSC_443) {
 767                fmt = VIDEO_STD_NTSC_4_43_BIT;
 768        } else if (std == V4L2_STD_PAL_M) {
 769                fmt = VIDEO_STD_PAL_M_BIT;
 770        } else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
 771                fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
 772        } else {
 773                /* Then, test against generic ones */
 774                if (std & V4L2_STD_NTSC)
 775                        fmt = VIDEO_STD_NTSC_MJ_BIT;
 776                else if (std & V4L2_STD_PAL)
 777                        fmt = VIDEO_STD_PAL_BDGHIN_BIT;
 778                else if (std & V4L2_STD_SECAM)
 779                        fmt = VIDEO_STD_SECAM_BIT;
 780        }
 781
 782        dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt);
 783        regmap_write(decoder->regmap, TVP5150_VIDEO_STD, fmt);
 784        return 0;
 785}
 786
 787static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
 788{
 789        struct tvp5150 *decoder = to_tvp5150(sd);
 790
 791        *std = decoder->norm;
 792
 793        return 0;
 794}
 795
 796static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 797{
 798        struct tvp5150 *decoder = to_tvp5150(sd);
 799        struct tvp5150_connector *cur_con = decoder->cur_connector;
 800        v4l2_std_id supported_stds;
 801
 802        if (decoder->norm == std)
 803                return 0;
 804
 805        /* In case of no of-connectors are available no limitations are made */
 806        if (!decoder->connectors_num)
 807                supported_stds = V4L2_STD_ALL;
 808        else
 809                supported_stds = cur_con->base.connector.analog.sdtv_stds;
 810
 811        /*
 812         * Check if requested std or group of std's is/are supported by the
 813         * connector.
 814         */
 815        if ((supported_stds & std) == 0)
 816                return -EINVAL;
 817
 818        /* Change cropping height limits */
 819        if (std & V4L2_STD_525_60)
 820                decoder->rect.height = TVP5150_V_MAX_525_60;
 821        else
 822                decoder->rect.height = TVP5150_V_MAX_OTHERS;
 823
 824        /* Set only the specific supported std in case of group of std's. */
 825        decoder->norm = supported_stds & std;
 826
 827        return tvp5150_set_std(sd, std);
 828}
 829
 830static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
 831{
 832        int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
 833
 834        switch (val & 0x0F) {
 835        case 0x01:
 836                return V4L2_STD_NTSC;
 837        case 0x03:
 838                return V4L2_STD_PAL;
 839        case 0x05:
 840                return V4L2_STD_PAL_M;
 841        case 0x07:
 842                return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
 843        case 0x09:
 844                return V4L2_STD_NTSC_443;
 845        case 0xb:
 846                return V4L2_STD_SECAM;
 847        default:
 848                return V4L2_STD_UNKNOWN;
 849        }
 850}
 851
 852static int query_lock(struct v4l2_subdev *sd)
 853{
 854        struct tvp5150 *decoder = to_tvp5150(sd);
 855        int status;
 856
 857        if (decoder->irq)
 858                return decoder->lock;
 859
 860        regmap_read(decoder->regmap, TVP5150_STATUS_REG_1, &status);
 861
 862        /* For standard detection, we need the 3 locks */
 863        return (status & 0x0e) == 0x0e;
 864}
 865
 866static int tvp5150_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 867{
 868        *std_id = query_lock(sd) ? tvp5150_read_std(sd) : V4L2_STD_UNKNOWN;
 869
 870        return 0;
 871}
 872
 873static const struct v4l2_event tvp5150_ev_fmt = {
 874        .type = V4L2_EVENT_SOURCE_CHANGE,
 875        .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
 876};
 877
 878static irqreturn_t tvp5150_isr(int irq, void *dev_id)
 879{
 880        struct tvp5150 *decoder = dev_id;
 881        struct regmap *map = decoder->regmap;
 882        unsigned int mask, active = 0, status = 0;
 883
 884        mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
 885               TVP5150_MISC_CTL_CLOCK_OE;
 886
 887        regmap_read(map, TVP5150_INT_STATUS_REG_A, &status);
 888        if (status) {
 889                regmap_write(map, TVP5150_INT_STATUS_REG_A, status);
 890
 891                if (status & TVP5150_INT_A_LOCK) {
 892                        decoder->lock = !!(status & TVP5150_INT_A_LOCK_STATUS);
 893                        dev_dbg_lvl(decoder->sd.dev, 1, debug,
 894                                    "sync lo%s signal\n",
 895                                    decoder->lock ? "ck" : "ss");
 896                        v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);
 897                        regmap_update_bits(map, TVP5150_MISC_CTL, mask,
 898                                           decoder->lock ? decoder->oe : 0);
 899                }
 900
 901                return IRQ_HANDLED;
 902        }
 903
 904        regmap_read(map, TVP5150_INT_ACTIVE_REG_B, &active);
 905        if (active) {
 906                status = 0;
 907                regmap_read(map, TVP5150_INT_STATUS_REG_B, &status);
 908                if (status)
 909                        regmap_write(map, TVP5150_INT_RESET_REG_B, status);
 910        }
 911
 912        return IRQ_HANDLED;
 913}
 914
 915static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 916{
 917        struct tvp5150 *decoder = to_tvp5150(sd);
 918        struct regmap *map = decoder->regmap;
 919
 920        /* Initializes TVP5150 to its default values */
 921        tvp5150_write_inittab(sd, tvp5150_init_default);
 922
 923        if (decoder->irq) {
 924                /* Configure pins: FID, VSYNC, INTREQ, SCLK */
 925                regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x0);
 926                /* Set interrupt polarity to active high */
 927                regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE | 0x1);
 928                regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x1);
 929        } else {
 930                /* Configure pins: FID, VSYNC, GPCL/VBLK, SCLK */
 931                regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x2);
 932                /* Keep interrupt polarity active low */
 933                regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE);
 934                regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x0);
 935        }
 936
 937        /* Initializes VDP registers */
 938        tvp5150_vdp_init(sd);
 939
 940        /* Selects decoder input */
 941        tvp5150_selmux(sd);
 942
 943        /* Initialize image preferences */
 944        v4l2_ctrl_handler_setup(&decoder->hdl);
 945
 946        return 0;
 947}
 948
 949static int tvp5150_enable(struct v4l2_subdev *sd)
 950{
 951        struct tvp5150 *decoder = to_tvp5150(sd);
 952        v4l2_std_id std;
 953
 954        /* Initializes TVP5150 to stream enabled values */
 955        tvp5150_write_inittab(sd, tvp5150_init_enable);
 956
 957        if (decoder->norm == V4L2_STD_ALL)
 958                std = tvp5150_read_std(sd);
 959        else
 960                std = decoder->norm;
 961
 962        /* Disable autoswitch mode */
 963        tvp5150_set_std(sd, std);
 964
 965        /*
 966         * Enable the YCbCr and clock outputs. In discrete sync mode
 967         * (non-BT.656) additionally enable the sync outputs.
 968         */
 969        switch (decoder->mbus_type) {
 970        case V4L2_MBUS_PARALLEL:
 971                /* 8-bit 4:2:2 YUV with discrete sync output */
 972                regmap_update_bits(decoder->regmap, TVP5150_DATA_RATE_SEL,
 973                                   0x7, 0x0);
 974                decoder->oe = TVP5150_MISC_CTL_YCBCR_OE |
 975                              TVP5150_MISC_CTL_CLOCK_OE |
 976                              TVP5150_MISC_CTL_SYNC_OE;
 977                break;
 978        case V4L2_MBUS_BT656:
 979                decoder->oe = TVP5150_MISC_CTL_YCBCR_OE |
 980                              TVP5150_MISC_CTL_CLOCK_OE;
 981                break;
 982        default:
 983                return -EINVAL;
 984        }
 985
 986        return 0;
 987};
 988
 989static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
 990{
 991        struct v4l2_subdev *sd = to_sd(ctrl);
 992        struct tvp5150 *decoder = to_tvp5150(sd);
 993
 994        switch (ctrl->id) {
 995        case V4L2_CID_BRIGHTNESS:
 996                regmap_write(decoder->regmap, TVP5150_BRIGHT_CTL, ctrl->val);
 997                return 0;
 998        case V4L2_CID_CONTRAST:
 999                regmap_write(decoder->regmap, TVP5150_CONTRAST_CTL, ctrl->val);
1000                return 0;
1001        case V4L2_CID_SATURATION:
1002                regmap_write(decoder->regmap, TVP5150_SATURATION_CTL,
1003                             ctrl->val);
1004                return 0;
1005        case V4L2_CID_HUE:
1006                regmap_write(decoder->regmap, TVP5150_HUE_CTL, ctrl->val);
1007                return 0;
1008        case V4L2_CID_TEST_PATTERN:
1009                decoder->enable = ctrl->val ? false : true;
1010                tvp5150_selmux(sd);
1011                return 0;
1012        }
1013        return -EINVAL;
1014}
1015
1016static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
1017{
1018        /* Default is no cropping */
1019        crop->top = 0;
1020        crop->left = 0;
1021        crop->width = TVP5150_H_MAX;
1022        if (std & V4L2_STD_525_60)
1023                crop->height = TVP5150_V_MAX_525_60;
1024        else
1025                crop->height = TVP5150_V_MAX_OTHERS;
1026}
1027
1028static struct v4l2_rect *
1029tvp5150_get_pad_crop(struct tvp5150 *decoder,
1030                     struct v4l2_subdev_state *sd_state, unsigned int pad,
1031                     enum v4l2_subdev_format_whence which)
1032{
1033        switch (which) {
1034        case V4L2_SUBDEV_FORMAT_ACTIVE:
1035                return &decoder->rect;
1036        case V4L2_SUBDEV_FORMAT_TRY:
1037#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
1038                return v4l2_subdev_get_try_crop(&decoder->sd, sd_state, pad);
1039#else
1040                return ERR_PTR(-EINVAL);
1041#endif
1042        default:
1043                return ERR_PTR(-EINVAL);
1044        }
1045}
1046
1047static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
1048                            struct v4l2_subdev_state *sd_state,
1049                            struct v4l2_subdev_format *format)
1050{
1051        struct v4l2_mbus_framefmt *f;
1052        struct tvp5150 *decoder = to_tvp5150(sd);
1053
1054        if (!format || (format->pad != TVP5150_PAD_VID_OUT))
1055                return -EINVAL;
1056
1057        f = &format->format;
1058
1059        f->width = decoder->rect.width;
1060        f->height = decoder->rect.height / 2;
1061
1062        f->code = TVP5150_MBUS_FMT;
1063        f->field = TVP5150_FIELD;
1064        f->colorspace = TVP5150_COLORSPACE;
1065
1066        dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width,
1067                    f->height);
1068        return 0;
1069}
1070
1071static unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
1072{
1073        struct tvp5150 *decoder = to_tvp5150(sd);
1074        v4l2_std_id std;
1075
1076        /* Calculate height based on current standard */
1077        if (decoder->norm == V4L2_STD_ALL)
1078                std = tvp5150_read_std(sd);
1079        else
1080                std = decoder->norm;
1081
1082        return (std & V4L2_STD_525_60) ?
1083                TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
1084}
1085
1086static void tvp5150_set_hw_selection(struct v4l2_subdev *sd,
1087                                     struct v4l2_rect *rect)
1088{
1089        struct tvp5150 *decoder = to_tvp5150(sd);
1090        unsigned int hmax = tvp5150_get_hmax(sd);
1091
1092        regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
1093        regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
1094                     rect->top + rect->height - hmax);
1095        regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
1096                     rect->left >> TVP5150_CROP_SHIFT);
1097        regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
1098                     rect->left | (1 << TVP5150_CROP_SHIFT));
1099        regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
1100                     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
1101                     TVP5150_CROP_SHIFT);
1102        regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
1103                     rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
1104}
1105
1106static int tvp5150_set_selection(struct v4l2_subdev *sd,
1107                                 struct v4l2_subdev_state *sd_state,
1108                                 struct v4l2_subdev_selection *sel)
1109{
1110        struct tvp5150 *decoder = to_tvp5150(sd);
1111        struct v4l2_rect *rect = &sel->r;
1112        struct v4l2_rect *crop;
1113        unsigned int hmax;
1114
1115        if (sel->target != V4L2_SEL_TGT_CROP)
1116                return -EINVAL;
1117
1118        dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
1119                __func__, rect->left, rect->top, rect->width, rect->height);
1120
1121        /* tvp5150 has some special limits */
1122        rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);
1123        rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);
1124        hmax = tvp5150_get_hmax(sd);
1125
1126        /*
1127         * alignments:
1128         *  - width = 2 due to UYVY colorspace
1129         *  - height, image = no special alignment
1130         */
1131        v4l_bound_align_image(&rect->width,
1132                              TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect->left,
1133                              TVP5150_H_MAX - rect->left, 1, &rect->height,
1134                              hmax - TVP5150_MAX_CROP_TOP - rect->top,
1135                              hmax - rect->top, 0, 0);
1136
1137        if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&
1138            sel->which == V4L2_SUBDEV_FORMAT_TRY)
1139                return 0;
1140
1141        crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad, sel->which);
1142        if (IS_ERR(crop))
1143                return PTR_ERR(crop);
1144
1145        /*
1146         * Update output image size if the selection (crop) rectangle size or
1147         * position has been modified.
1148         */
1149        if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
1150            !v4l2_rect_equal(rect, crop))
1151                tvp5150_set_hw_selection(sd, rect);
1152
1153        *crop = *rect;
1154
1155        return 0;
1156}
1157
1158static int tvp5150_get_selection(struct v4l2_subdev *sd,
1159                                 struct v4l2_subdev_state *sd_state,
1160                                 struct v4l2_subdev_selection *sel)
1161{
1162        struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
1163        struct v4l2_rect *crop;
1164        v4l2_std_id std;
1165
1166        switch (sel->target) {
1167        case V4L2_SEL_TGT_CROP_BOUNDS:
1168                sel->r.left = 0;
1169                sel->r.top = 0;
1170                sel->r.width = TVP5150_H_MAX;
1171
1172                /* Calculate height based on current standard */
1173                if (decoder->norm == V4L2_STD_ALL)
1174                        std = tvp5150_read_std(sd);
1175                else
1176                        std = decoder->norm;
1177                if (std & V4L2_STD_525_60)
1178                        sel->r.height = TVP5150_V_MAX_525_60;
1179                else
1180                        sel->r.height = TVP5150_V_MAX_OTHERS;
1181                return 0;
1182        case V4L2_SEL_TGT_CROP:
1183                crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad,
1184                                            sel->which);
1185                if (IS_ERR(crop))
1186                        return PTR_ERR(crop);
1187                sel->r = *crop;
1188                return 0;
1189        default:
1190                return -EINVAL;
1191        }
1192}
1193
1194static int tvp5150_get_mbus_config(struct v4l2_subdev *sd,
1195                                   unsigned int pad,
1196                                   struct v4l2_mbus_config *cfg)
1197{
1198        struct tvp5150 *decoder = to_tvp5150(sd);
1199
1200        cfg->type = decoder->mbus_type;
1201        cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
1202                   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
1203
1204        return 0;
1205}
1206
1207/****************************************************************************
1208                        V4L2 subdev pad ops
1209 ****************************************************************************/
1210static int tvp5150_init_cfg(struct v4l2_subdev *sd,
1211                            struct v4l2_subdev_state *sd_state)
1212{
1213        struct tvp5150 *decoder = to_tvp5150(sd);
1214        v4l2_std_id std;
1215
1216        /*
1217         * Reset selection to maximum on subdev_open() if autodetection is on
1218         * and a standard change is detected.
1219         */
1220        if (decoder->norm == V4L2_STD_ALL) {
1221                std = tvp5150_read_std(sd);
1222                if (std != decoder->detected_norm) {
1223                        decoder->detected_norm = std;
1224                        tvp5150_set_default(std, &decoder->rect);
1225                }
1226        }
1227
1228        return 0;
1229}
1230
1231static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
1232                struct v4l2_subdev_state *sd_state,
1233                struct v4l2_subdev_mbus_code_enum *code)
1234{
1235        if (code->pad || code->index)
1236                return -EINVAL;
1237
1238        code->code = TVP5150_MBUS_FMT;
1239        return 0;
1240}
1241
1242static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
1243                                   struct v4l2_subdev_state *sd_state,
1244                                   struct v4l2_subdev_frame_size_enum *fse)
1245{
1246        struct tvp5150 *decoder = to_tvp5150(sd);
1247
1248        if (fse->index >= 8 || fse->code != TVP5150_MBUS_FMT)
1249                return -EINVAL;
1250
1251        fse->code = TVP5150_MBUS_FMT;
1252        fse->min_width = decoder->rect.width;
1253        fse->max_width = decoder->rect.width;
1254        fse->min_height = decoder->rect.height / 2;
1255        fse->max_height = decoder->rect.height / 2;
1256
1257        return 0;
1258}
1259
1260/****************************************************************************
1261 *                      Media entity ops
1262 ****************************************************************************/
1263#if defined(CONFIG_MEDIA_CONTROLLER)
1264static int tvp5150_set_link(struct media_pad *connector_pad,
1265                            struct media_pad *tvp5150_pad, u32 flags)
1266{
1267        struct media_link *link;
1268
1269        link = media_entity_find_link(connector_pad, tvp5150_pad);
1270        if (!link)
1271                return -EINVAL;
1272
1273        link->flags = flags;
1274        link->reverse->flags = link->flags;
1275
1276        return 0;
1277}
1278
1279static int tvp5150_disable_all_input_links(struct tvp5150 *decoder)
1280{
1281        struct media_pad *connector_pad;
1282        unsigned int i;
1283        int err;
1284
1285        for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
1286                connector_pad = media_entity_remote_pad(&decoder->pads[i]);
1287                if (!connector_pad)
1288                        continue;
1289
1290                err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0);
1291                if (err)
1292                        return err;
1293        }
1294
1295        return 0;
1296}
1297
1298static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
1299                             u32 config);
1300
1301static int tvp5150_link_setup(struct media_entity *entity,
1302                              const struct media_pad *tvp5150_pad,
1303                              const struct media_pad *remote, u32 flags)
1304{
1305        struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1306        struct tvp5150 *decoder = to_tvp5150(sd);
1307        struct media_pad *other_tvp5150_pad =
1308                &decoder->pads[tvp5150_pad->index ^ 1];
1309        struct v4l2_fwnode_connector *v4l2c;
1310        bool is_svideo = false;
1311        unsigned int i;
1312        int err;
1313
1314        /*
1315         * The TVP5150 state is determined by the enabled sink pad link(s).
1316         * Enabling or disabling the source pad link has no effect.
1317         */
1318        if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE)
1319                return 0;
1320
1321        /* Check if the svideo connector should be enabled */
1322        for (i = 0; i < decoder->connectors_num; i++) {
1323                if (remote->entity == &decoder->connectors[i].ent) {
1324                        v4l2c = &decoder->connectors[i].base;
1325                        is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;
1326                        break;
1327                }
1328        }
1329
1330        dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]",
1331                    remote->entity->name, remote->index,
1332                    tvp5150_pad->entity->name, tvp5150_pad->index,
1333                    flags & MEDIA_LNK_FL_ENABLED);
1334        if (is_svideo)
1335                dev_dbg_lvl(sd->dev, 1, debug,
1336                            "link setup '%s':%d->'%s':%d[%d]",
1337                            remote->entity->name, remote->index,
1338                            other_tvp5150_pad->entity->name,
1339                            other_tvp5150_pad->index,
1340                            flags & MEDIA_LNK_FL_ENABLED);
1341
1342        /*
1343         * The TVP5150 has an internal mux which allows the following setup:
1344         *
1345         * comp-connector1  --\
1346         *                     |---> AIP1A
1347         *                    /
1348         * svideo-connector -|
1349         *                    \
1350         *                     |---> AIP1B
1351         * comp-connector2  --/
1352         *
1353         * We can't rely on user space that the current connector gets disabled
1354         * first before enabling the new connector. Disable all active
1355         * connector links to be on the safe side.
1356         */
1357        err = tvp5150_disable_all_input_links(decoder);
1358        if (err)
1359                return err;
1360
1361        tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index,
1362                          flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL :
1363                          TVP5150_BLACK_SCREEN, 0);
1364
1365        if (flags & MEDIA_LNK_FL_ENABLED) {
1366                struct v4l2_fwnode_connector_analog *v4l2ca;
1367                u32 new_norm;
1368
1369                /*
1370                 * S-Video connector is conneted to both ports AIP1A and AIP1B.
1371                 * Both links must be enabled in one-shot regardless which link
1372                 * the user requests.
1373                 */
1374                if (is_svideo) {
1375                        err = tvp5150_set_link((struct media_pad *)remote,
1376                                               other_tvp5150_pad, flags);
1377                        if (err)
1378                                return err;
1379                }
1380
1381                if (!decoder->connectors_num)
1382                        return 0;
1383
1384                /* Update the current connector */
1385                decoder->cur_connector =
1386                        container_of(remote, struct tvp5150_connector, pad);
1387
1388                /*
1389                 * Do nothing if the new connector supports the same tv-norms as
1390                 * the old one.
1391                 */
1392                v4l2ca = &decoder->cur_connector->base.connector.analog;
1393                new_norm = decoder->norm & v4l2ca->sdtv_stds;
1394                if (decoder->norm == new_norm)
1395                        return 0;
1396
1397                /*
1398                 * Fallback to the new connector tv-norms if we can't find any
1399                 * common between the current tv-norm and the new one.
1400                 */
1401                tvp5150_s_std(sd, new_norm ? new_norm : v4l2ca->sdtv_stds);
1402        }
1403
1404        return 0;
1405}
1406
1407static const struct media_entity_operations tvp5150_sd_media_ops = {
1408        .link_setup = tvp5150_link_setup,
1409};
1410#endif
1411/****************************************************************************
1412                        I2C Command
1413 ****************************************************************************/
1414static int __maybe_unused tvp5150_runtime_suspend(struct device *dev)
1415{
1416        struct v4l2_subdev *sd = dev_get_drvdata(dev);
1417        struct tvp5150 *decoder = to_tvp5150(sd);
1418
1419        if (decoder->irq)
1420                /* Disable lock interrupt */
1421                return regmap_update_bits(decoder->regmap,
1422                                          TVP5150_INT_ENABLE_REG_A,
1423                                          TVP5150_INT_A_LOCK, 0);
1424        return 0;
1425}
1426
1427static int __maybe_unused tvp5150_runtime_resume(struct device *dev)
1428{
1429        struct v4l2_subdev *sd = dev_get_drvdata(dev);
1430        struct tvp5150 *decoder = to_tvp5150(sd);
1431
1432        if (decoder->irq)
1433                /* Enable lock interrupt */
1434                return regmap_update_bits(decoder->regmap,
1435                                          TVP5150_INT_ENABLE_REG_A,
1436                                          TVP5150_INT_A_LOCK,
1437                                          TVP5150_INT_A_LOCK);
1438        return 0;
1439}
1440
1441static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
1442{
1443        struct tvp5150 *decoder = to_tvp5150(sd);
1444        unsigned int mask, val = 0;
1445        int ret;
1446
1447        mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
1448               TVP5150_MISC_CTL_CLOCK_OE;
1449
1450        if (enable) {
1451                ret = pm_runtime_resume_and_get(sd->dev);
1452                if (ret < 0)
1453                        return ret;
1454
1455                tvp5150_enable(sd);
1456
1457                /* Enable outputs if decoder is locked */
1458                if (decoder->irq)
1459                        val = decoder->lock ? decoder->oe : 0;
1460                else
1461                        val = decoder->oe;
1462
1463                v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);
1464        } else {
1465                pm_runtime_put(sd->dev);
1466        }
1467
1468        regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);
1469
1470        return 0;
1471}
1472
1473static int tvp5150_s_routing(struct v4l2_subdev *sd,
1474                             u32 input, u32 output, u32 config)
1475{
1476        struct tvp5150 *decoder = to_tvp5150(sd);
1477
1478        decoder->input = input;
1479        decoder->output = output;
1480
1481        if (output == TVP5150_BLACK_SCREEN)
1482                decoder->enable = false;
1483        else
1484                decoder->enable = true;
1485
1486        tvp5150_selmux(sd);
1487        return 0;
1488}
1489
1490static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
1491{
1492        struct tvp5150 *decoder = to_tvp5150(sd);
1493
1494        /*
1495         * this is for capturing 36 raw vbi lines
1496         * if there's a way to cut off the beginning 2 vbi lines
1497         * with the tvp5150 then the vbi line count could be lowered
1498         * to 17 lines/field again, although I couldn't find a register
1499         * which could do that cropping
1500         */
1501
1502        if (fmt->sample_format == V4L2_PIX_FMT_GREY)
1503                regmap_write(decoder->regmap, TVP5150_LUMA_PROC_CTL_1, 0x70);
1504        if (fmt->count[0] == 18 && fmt->count[1] == 18) {
1505                regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START,
1506                             0x00);
1507                regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP, 0x01);
1508        }
1509        return 0;
1510}
1511
1512static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1513{
1514        struct tvp5150 *decoder = to_tvp5150(sd);
1515        int i;
1516
1517        if (svbi->service_set != 0) {
1518                for (i = 0; i <= 23; i++) {
1519                        svbi->service_lines[1][i] = 0;
1520                        svbi->service_lines[0][i] =
1521                                tvp5150_set_vbi(sd, svbi->service_lines[0][i],
1522                                                0xf0, i, 3);
1523                }
1524                /* Enables FIFO */
1525                regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 1);
1526        } else {
1527                /* Disables FIFO*/
1528                regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 0);
1529
1530                /* Disable Full Field */
1531                regmap_write(decoder->regmap, TVP5150_FULL_FIELD_ENA, 0);
1532
1533                /* Disable Line modes */
1534                for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1535                        regmap_write(decoder->regmap, i, 0xff);
1536        }
1537        return 0;
1538}
1539
1540static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1541{
1542        int i, mask = 0;
1543
1544        memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1545
1546        for (i = 0; i <= 23; i++) {
1547                svbi->service_lines[0][i] =
1548                        tvp5150_get_vbi(sd, i);
1549                mask |= svbi->service_lines[0][i];
1550        }
1551        svbi->service_set = mask;
1552        return 0;
1553}
1554
1555#ifdef CONFIG_VIDEO_ADV_DEBUG
1556static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1557{
1558        int res;
1559
1560        res = tvp5150_read(sd, reg->reg & 0xff);
1561        if (res < 0) {
1562                dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res);
1563                return res;
1564        }
1565
1566        reg->val = res;
1567        reg->size = 1;
1568        return 0;
1569}
1570
1571static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1572{
1573        struct tvp5150 *decoder = to_tvp5150(sd);
1574
1575        return regmap_write(decoder->regmap, reg->reg & 0xff, reg->val & 0xff);
1576}
1577#endif
1578
1579static int tvp5150_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
1580                                   struct v4l2_event_subscription *sub)
1581{
1582        switch (sub->type) {
1583        case V4L2_EVENT_SOURCE_CHANGE:
1584                return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
1585        case V4L2_EVENT_CTRL:
1586                return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
1587        default:
1588                return -EINVAL;
1589        }
1590}
1591
1592static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1593{
1594        int status = tvp5150_read(sd, 0x88);
1595
1596        vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1597        return 0;
1598}
1599
1600static int tvp5150_registered(struct v4l2_subdev *sd)
1601{
1602#if defined(CONFIG_MEDIA_CONTROLLER)
1603        struct tvp5150 *decoder = to_tvp5150(sd);
1604        unsigned int i;
1605        int ret;
1606
1607        /*
1608         * Setup connector pads and links. Enable the link to the first
1609         * available connector per default.
1610         */
1611        for (i = 0; i < decoder->connectors_num; i++) {
1612                struct media_entity *con = &decoder->connectors[i].ent;
1613                struct media_pad *pad = &decoder->connectors[i].pad;
1614                struct v4l2_fwnode_connector *v4l2c =
1615                        &decoder->connectors[i].base;
1616                struct v4l2_connector_link *link =
1617                        v4l2_connector_first_link(v4l2c);
1618                unsigned int port = link->fwnode_link.remote_port;
1619                unsigned int flags = i ? 0 : MEDIA_LNK_FL_ENABLED;
1620                bool is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;
1621
1622                pad->flags = MEDIA_PAD_FL_SOURCE;
1623                ret = media_entity_pads_init(con, 1, pad);
1624                if (ret < 0)
1625                        goto err;
1626
1627                ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
1628                if (ret < 0)
1629                        goto err;
1630
1631                ret = media_create_pad_link(con, 0, &sd->entity, port, flags);
1632                if (ret < 0)
1633                        goto err;
1634
1635                if (is_svideo) {
1636                        /*
1637                         * Check tvp5150_link_setup() comments for more
1638                         * information.
1639                         */
1640                        link = v4l2_connector_last_link(v4l2c);
1641                        port = link->fwnode_link.remote_port;
1642                        ret = media_create_pad_link(con, 0, &sd->entity, port,
1643                                                    flags);
1644                        if (ret < 0)
1645                                goto err;
1646                }
1647
1648                /* Enable default input. */
1649                if (flags == MEDIA_LNK_FL_ENABLED) {
1650                        decoder->input =
1651                                is_svideo ? TVP5150_SVIDEO :
1652                                port == 0 ? TVP5150_COMPOSITE0 :
1653                                TVP5150_COMPOSITE1;
1654
1655                        tvp5150_selmux(sd);
1656                        decoder->cur_connector = &decoder->connectors[i];
1657                        tvp5150_s_std(sd, v4l2c->connector.analog.sdtv_stds);
1658                }
1659        }
1660
1661        return 0;
1662
1663err:
1664        for (i = 0; i < decoder->connectors_num; i++) {
1665                media_device_unregister_entity(&decoder->connectors[i].ent);
1666                media_entity_cleanup(&decoder->connectors[i].ent);
1667        }
1668        return ret;
1669#endif
1670
1671        return 0;
1672}
1673
1674static int tvp5150_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1675{
1676        return pm_runtime_resume_and_get(sd->dev);
1677}
1678
1679static int tvp5150_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1680{
1681        pm_runtime_put(sd->dev);
1682
1683        return 0;
1684}
1685
1686/* ----------------------------------------------------------------------- */
1687
1688static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1689        .s_ctrl = tvp5150_s_ctrl,
1690};
1691
1692static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1693        .log_status = tvp5150_log_status,
1694        .reset = tvp5150_reset,
1695#ifdef CONFIG_VIDEO_ADV_DEBUG
1696        .g_register = tvp5150_g_register,
1697        .s_register = tvp5150_s_register,
1698#endif
1699        .subscribe_event = tvp5150_subscribe_event,
1700        .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1701};
1702
1703static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1704        .g_tuner = tvp5150_g_tuner,
1705};
1706
1707static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1708        .s_std = tvp5150_s_std,
1709        .g_std = tvp5150_g_std,
1710        .querystd = tvp5150_querystd,
1711        .s_stream = tvp5150_s_stream,
1712        .s_routing = tvp5150_s_routing,
1713};
1714
1715static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1716        .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1717        .g_sliced_fmt = tvp5150_g_sliced_fmt,
1718        .s_sliced_fmt = tvp5150_s_sliced_fmt,
1719        .s_raw_fmt = tvp5150_s_raw_fmt,
1720};
1721
1722static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
1723        .init_cfg = tvp5150_init_cfg,
1724        .enum_mbus_code = tvp5150_enum_mbus_code,
1725        .enum_frame_size = tvp5150_enum_frame_size,
1726        .set_fmt = tvp5150_fill_fmt,
1727        .get_fmt = tvp5150_fill_fmt,
1728        .get_selection = tvp5150_get_selection,
1729        .set_selection = tvp5150_set_selection,
1730        .get_mbus_config = tvp5150_get_mbus_config,
1731};
1732
1733static const struct v4l2_subdev_ops tvp5150_ops = {
1734        .core = &tvp5150_core_ops,
1735        .tuner = &tvp5150_tuner_ops,
1736        .video = &tvp5150_video_ops,
1737        .vbi = &tvp5150_vbi_ops,
1738        .pad = &tvp5150_pad_ops,
1739};
1740
1741static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
1742        .registered = tvp5150_registered,
1743        .open = tvp5150_open,
1744        .close = tvp5150_close,
1745};
1746
1747/****************************************************************************
1748                        I2C Client & Driver
1749 ****************************************************************************/
1750
1751static const struct regmap_range tvp5150_readable_ranges[] = {
1752        {
1753                .range_min = TVP5150_VD_IN_SRC_SEL_1,
1754                .range_max = TVP5150_AUTOSW_MSK,
1755        }, {
1756                .range_min = TVP5150_COLOR_KIL_THSH_CTL,
1757                .range_max = TVP5150_CONF_SHARED_PIN,
1758        }, {
1759                .range_min = TVP5150_ACT_VD_CROP_ST_MSB,
1760                .range_max = TVP5150_HORIZ_SYNC_START,
1761        }, {
1762                .range_min = TVP5150_VERT_BLANKING_START,
1763                .range_max = TVP5150_INTT_CONFIG_REG_B,
1764        }, {
1765                .range_min = TVP5150_VIDEO_STD,
1766                .range_max = TVP5150_VIDEO_STD,
1767        }, {
1768                .range_min = TVP5150_CB_GAIN_FACT,
1769                .range_max = TVP5150_REV_SELECT,
1770        }, {
1771                .range_min = TVP5150_MSB_DEV_ID,
1772                .range_max = TVP5150_STATUS_REG_5,
1773        }, {
1774                .range_min = TVP5150_CC_DATA_INI,
1775                .range_max = TVP5150_TELETEXT_FIL_ENA,
1776        }, {
1777                .range_min = TVP5150_INT_STATUS_REG_A,
1778                .range_max = TVP5150_FIFO_OUT_CTRL,
1779        }, {
1780                .range_min = TVP5150_FULL_FIELD_ENA,
1781                .range_max = TVP5150_FULL_FIELD_MODE_REG,
1782        },
1783};
1784
1785static bool tvp5150_volatile_reg(struct device *dev, unsigned int reg)
1786{
1787        switch (reg) {
1788        case TVP5150_VERT_LN_COUNT_MSB:
1789        case TVP5150_VERT_LN_COUNT_LSB:
1790        case TVP5150_INT_STATUS_REG_A:
1791        case TVP5150_INT_STATUS_REG_B:
1792        case TVP5150_INT_ACTIVE_REG_B:
1793        case TVP5150_STATUS_REG_1:
1794        case TVP5150_STATUS_REG_2:
1795        case TVP5150_STATUS_REG_3:
1796        case TVP5150_STATUS_REG_4:
1797        case TVP5150_STATUS_REG_5:
1798        /* CC, WSS, VPS, VITC data? */
1799        case TVP5150_VBI_FIFO_READ_DATA:
1800        case TVP5150_VDP_STATUS_REG:
1801        case TVP5150_FIFO_WORD_COUNT:
1802                return true;
1803        default:
1804                return false;
1805        }
1806}
1807
1808static const struct regmap_access_table tvp5150_readable_table = {
1809        .yes_ranges = tvp5150_readable_ranges,
1810        .n_yes_ranges = ARRAY_SIZE(tvp5150_readable_ranges),
1811};
1812
1813static struct regmap_config tvp5150_config = {
1814        .reg_bits = 8,
1815        .val_bits = 8,
1816        .max_register = 0xff,
1817
1818        .cache_type = REGCACHE_RBTREE,
1819
1820        .rd_table = &tvp5150_readable_table,
1821        .volatile_reg = tvp5150_volatile_reg,
1822};
1823
1824static int tvp5150_detect_version(struct tvp5150 *core)
1825{
1826        struct v4l2_subdev *sd = &core->sd;
1827        struct i2c_client *c = v4l2_get_subdevdata(sd);
1828        u8 regs[4];
1829        int res;
1830
1831        /*
1832         * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1833         * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1834         */
1835        res = regmap_bulk_read(core->regmap, TVP5150_MSB_DEV_ID, regs, 4);
1836        if (res < 0) {
1837                dev_err(&c->dev, "reading ID registers failed: %d\n", res);
1838                return res;
1839        }
1840
1841        core->dev_id = (regs[0] << 8) | regs[1];
1842        core->rom_ver = (regs[2] << 8) | regs[3];
1843
1844        dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
1845                  core->dev_id, regs[2], regs[3], c->addr << 1,
1846                  c->adapter->name);
1847
1848        if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
1849                dev_info(sd->dev, "tvp5150a detected.\n");
1850        } else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
1851                dev_info(sd->dev, "tvp5150am1 detected.\n");
1852
1853                /* ITU-T BT.656.4 timing */
1854                regmap_write(core->regmap, TVP5150_REV_SELECT, 0);
1855        } else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
1856                dev_info(sd->dev, "tvp5151 detected.\n");
1857        } else {
1858                dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n",
1859                          core->dev_id);
1860        }
1861
1862        return 0;
1863}
1864
1865static int tvp5150_init(struct i2c_client *c)
1866{
1867        struct gpio_desc *pdn_gpio;
1868        struct gpio_desc *reset_gpio;
1869
1870        pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
1871        if (IS_ERR(pdn_gpio))
1872                return PTR_ERR(pdn_gpio);
1873
1874        if (pdn_gpio) {
1875                gpiod_set_value_cansleep(pdn_gpio, 0);
1876                /* Delay time between power supplies active and reset */
1877                msleep(20);
1878        }
1879
1880        reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
1881        if (IS_ERR(reset_gpio))
1882                return PTR_ERR(reset_gpio);
1883
1884        if (reset_gpio) {
1885                /* RESETB pulse duration */
1886                ndelay(500);
1887                gpiod_set_value_cansleep(reset_gpio, 0);
1888                /* Delay time between end of reset to I2C active */
1889                usleep_range(200, 250);
1890        }
1891
1892        return 0;
1893}
1894
1895#if defined(CONFIG_MEDIA_CONTROLLER)
1896static int tvp5150_mc_init(struct tvp5150 *decoder)
1897{
1898        struct v4l2_subdev *sd = &decoder->sd;
1899        unsigned int i;
1900
1901        sd->entity.ops = &tvp5150_sd_media_ops;
1902        sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
1903
1904        for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
1905                decoder->pads[i].flags = MEDIA_PAD_FL_SINK;
1906                decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;
1907        }
1908
1909        decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;
1910        decoder->pads[i].sig_type = PAD_SIGNAL_DV;
1911
1912        return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS,
1913                                      decoder->pads);
1914}
1915
1916#else /* !defined(CONFIG_MEDIA_CONTROLLER) */
1917
1918static inline int tvp5150_mc_init(struct tvp5150 *decoder)
1919{
1920        return 0;
1921}
1922#endif /* defined(CONFIG_MEDIA_CONTROLLER) */
1923
1924static int tvp5150_validate_connectors(struct tvp5150 *decoder)
1925{
1926        struct device *dev = decoder->sd.dev;
1927        struct tvp5150_connector *tvpc;
1928        struct v4l2_fwnode_connector *v4l2c;
1929        unsigned int i;
1930
1931        if (!decoder->connectors_num) {
1932                dev_err(dev, "No valid connector found\n");
1933                return -ENODEV;
1934        }
1935
1936        for (i = 0; i < decoder->connectors_num; i++) {
1937                struct v4l2_connector_link *link0 = NULL;
1938                struct v4l2_connector_link *link1;
1939
1940                tvpc = &decoder->connectors[i];
1941                v4l2c = &tvpc->base;
1942
1943                if (v4l2c->type == V4L2_CONN_COMPOSITE) {
1944                        if (v4l2c->nr_of_links != 1) {
1945                                dev_err(dev, "Composite: connector needs 1 link\n");
1946                                return -EINVAL;
1947                        }
1948                        link0 = v4l2_connector_first_link(v4l2c);
1949                        if (!link0) {
1950                                dev_err(dev, "Composite: invalid first link\n");
1951                                return -EINVAL;
1952                        }
1953                        if (link0->fwnode_link.remote_id == 1) {
1954                                dev_err(dev, "Composite: invalid endpoint id\n");
1955                                return -EINVAL;
1956                        }
1957                }
1958
1959                if (v4l2c->type == V4L2_CONN_SVIDEO) {
1960                        if (v4l2c->nr_of_links != 2) {
1961                                dev_err(dev, "SVideo: connector needs 2 links\n");
1962                                return -EINVAL;
1963                        }
1964                        link0 = v4l2_connector_first_link(v4l2c);
1965                        if (!link0) {
1966                                dev_err(dev, "SVideo: invalid first link\n");
1967                                return -EINVAL;
1968                        }
1969                        link1 = v4l2_connector_last_link(v4l2c);
1970                        if (link0->fwnode_link.remote_port ==
1971                            link1->fwnode_link.remote_port) {
1972                                dev_err(dev, "SVideo: invalid link setup\n");
1973                                return -EINVAL;
1974                        }
1975                }
1976
1977                if (!(v4l2c->connector.analog.sdtv_stds & TVP5150_STD_MASK)) {
1978                        dev_err(dev, "Unsupported tv-norm on connector %s\n",
1979                                v4l2c->name);
1980                        return -EINVAL;
1981                }
1982        }
1983
1984        return 0;
1985}
1986
1987static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
1988{
1989        struct device *dev = decoder->sd.dev;
1990        struct v4l2_fwnode_endpoint bus_cfg = {
1991                .bus_type = V4L2_MBUS_UNKNOWN
1992        };
1993        struct device_node *ep_np;
1994        struct tvp5150_connector *tvpc;
1995        struct v4l2_fwnode_connector *v4l2c;
1996        unsigned int flags, ep_num;
1997        unsigned int i;
1998        int ret;
1999
2000        /* At least 1 output and 1 input */
2001        ep_num = of_graph_get_endpoint_count(np);
2002        if (ep_num < 2 || ep_num > 5) {
2003                dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n");
2004                return -EINVAL;
2005        }
2006
2007        /* Layout if all connectors are used:
2008         *
2009         * tvp-5150 port@0 (AIP1A)
2010         *      endpoint@0 -----------> Comp0-Con  port
2011         *      endpoint@1 --------+--> Svideo-Con port
2012         * tvp-5150 port@1 (AIP1B) |
2013         *      endpoint@1 --------+
2014         *      endpoint@0 -----------> Comp1-Con  port
2015         * tvp-5150 port@2
2016         *      endpoint (video bitstream output at YOUT[0-7] parallel bus)
2017         */
2018        for_each_endpoint_of_node(np, ep_np) {
2019                struct fwnode_handle *ep_fwnode = of_fwnode_handle(ep_np);
2020                unsigned int next_connector = decoder->connectors_num;
2021                struct of_endpoint ep;
2022
2023                of_graph_parse_endpoint(ep_np, &ep);
2024                if (ep.port > 1 || ep.id > 1) {
2025                        dev_dbg(dev, "Ignore connector on port@%u/ep@%u\n",
2026                                ep.port, ep.id);
2027                        continue;
2028                }
2029
2030                tvpc = &decoder->connectors[next_connector];
2031                v4l2c = &tvpc->base;
2032
2033                if (ep.port == 0 || (ep.port == 1 && ep.id == 0)) {
2034                        ret = v4l2_fwnode_connector_parse(ep_fwnode, v4l2c);
2035                        if (ret)
2036                                goto err_put;
2037                        ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);
2038                        if (ret)
2039                                goto err_put;
2040                        decoder->connectors_num++;
2041                } else {
2042                        /* Adding the 2nd svideo link */
2043                        for (i = 0; i < TVP5150_MAX_CONNECTORS; i++) {
2044                                tvpc = &decoder->connectors[i];
2045                                v4l2c = &tvpc->base;
2046                                if (v4l2c->type == V4L2_CONN_SVIDEO)
2047                                        break;
2048                        }
2049
2050                        ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);
2051                        if (ret)
2052                                goto err_put;
2053                }
2054        }
2055
2056        ret = tvp5150_validate_connectors(decoder);
2057        if (ret)
2058                goto err_free;
2059
2060        for (i = 0; i < decoder->connectors_num; i++) {
2061                tvpc = &decoder->connectors[i];
2062                v4l2c = &tvpc->base;
2063                tvpc->ent.flags = MEDIA_ENT_FL_CONNECTOR;
2064                tvpc->ent.function = v4l2c->type == V4L2_CONN_SVIDEO ?
2065                        MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE;
2066                tvpc->ent.name = devm_kasprintf(dev, GFP_KERNEL, "%s %s",
2067                                                v4l2c->name, v4l2c->label ?
2068                                                v4l2c->label : "");
2069        }
2070
2071        ep_np = of_graph_get_endpoint_by_regs(np, TVP5150_PAD_VID_OUT, 0);
2072        if (!ep_np) {
2073                ret = -EINVAL;
2074                dev_err(dev, "Error no output endpoint available\n");
2075                goto err_free;
2076        }
2077        ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), &bus_cfg);
2078        of_node_put(ep_np);
2079        if (ret)
2080                goto err_free;
2081
2082        flags = bus_cfg.bus.parallel.flags;
2083        if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
2084            !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
2085              flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
2086              flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
2087                ret = -EINVAL;
2088                goto err_free;
2089        }
2090
2091        decoder->mbus_type = bus_cfg.bus_type;
2092
2093        return 0;
2094
2095err_put:
2096        of_node_put(ep_np);
2097err_free:
2098        for (i = 0; i < TVP5150_MAX_CONNECTORS; i++)
2099                v4l2_fwnode_connector_free(&decoder->connectors[i].base);
2100
2101        return ret;
2102}
2103
2104static const char * const tvp5150_test_patterns[2] = {
2105        "Disabled",
2106        "Black screen"
2107};
2108
2109static int tvp5150_probe(struct i2c_client *c)
2110{
2111        struct tvp5150 *core;
2112        struct v4l2_subdev *sd;
2113        struct device_node *np = c->dev.of_node;
2114        struct regmap *map;
2115        unsigned int i;
2116        int res;
2117
2118        /* Check if the adapter supports the needed features */
2119        if (!i2c_check_functionality(c->adapter,
2120             I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
2121                return -EIO;
2122
2123        res = tvp5150_init(c);
2124        if (res)
2125                return res;
2126
2127        core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
2128        if (!core)
2129                return -ENOMEM;
2130
2131        map = devm_regmap_init_i2c(c, &tvp5150_config);
2132        if (IS_ERR(map))
2133                return PTR_ERR(map);
2134
2135        core->regmap = map;
2136        sd = &core->sd;
2137        v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
2138        sd->internal_ops = &tvp5150_internal_ops;
2139        sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
2140
2141        if (IS_ENABLED(CONFIG_OF) && np) {
2142                res = tvp5150_parse_dt(core, np);
2143                if (res) {
2144                        dev_err(sd->dev, "DT parsing error: %d\n", res);
2145                        return res;
2146                }
2147        } else {
2148                /* Default to BT.656 embedded sync */
2149                core->mbus_type = V4L2_MBUS_BT656;
2150        }
2151
2152        res = tvp5150_mc_init(core);
2153        if (res)
2154                return res;
2155
2156        res = tvp5150_detect_version(core);
2157        if (res < 0)
2158                return res;
2159
2160        /*
2161         * Iterate over all available connectors in case they are supported and
2162         * successfully parsed. Fallback to default autodetect in case they
2163         * aren't supported.
2164         */
2165        for (i = 0; i < core->connectors_num; i++) {
2166                struct v4l2_fwnode_connector *v4l2c;
2167
2168                v4l2c = &core->connectors[i].base;
2169                core->norm |= v4l2c->connector.analog.sdtv_stds;
2170        }
2171
2172        if (!core->connectors_num)
2173                core->norm = V4L2_STD_ALL;
2174
2175        core->detected_norm = V4L2_STD_UNKNOWN;
2176        core->input = TVP5150_COMPOSITE1;
2177        core->enable = true;
2178
2179        v4l2_ctrl_handler_init(&core->hdl, 5);
2180        v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
2181                        V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
2182        v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
2183                        V4L2_CID_CONTRAST, 0, 255, 1, 128);
2184        v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
2185                        V4L2_CID_SATURATION, 0, 255, 1, 128);
2186        v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
2187                        V4L2_CID_HUE, -128, 127, 1, 0);
2188        v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
2189                        V4L2_CID_PIXEL_RATE, 27000000,
2190                        27000000, 1, 27000000);
2191        v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
2192                                     V4L2_CID_TEST_PATTERN,
2193                                     ARRAY_SIZE(tvp5150_test_patterns) - 1,
2194                                     0, 0, tvp5150_test_patterns);
2195        sd->ctrl_handler = &core->hdl;
2196        if (core->hdl.error) {
2197                res = core->hdl.error;
2198                goto err;
2199        }
2200
2201        tvp5150_set_default(tvp5150_read_std(sd), &core->rect);
2202
2203        core->irq = c->irq;
2204        tvp5150_reset(sd, 0);   /* Calls v4l2_ctrl_handler_setup() */
2205        if (c->irq) {
2206                res = devm_request_threaded_irq(&c->dev, c->irq, NULL,
2207                                                tvp5150_isr, IRQF_TRIGGER_HIGH |
2208                                                IRQF_ONESHOT, "tvp5150", core);
2209                if (res)
2210                        goto err;
2211        }
2212
2213        res = v4l2_async_register_subdev(sd);
2214        if (res < 0)
2215                goto err;
2216
2217        if (debug > 1)
2218                tvp5150_log_status(sd);
2219
2220        pm_runtime_set_active(&c->dev);
2221        pm_runtime_enable(&c->dev);
2222        pm_runtime_idle(&c->dev);
2223
2224        return 0;
2225
2226err:
2227        v4l2_ctrl_handler_free(&core->hdl);
2228        return res;
2229}
2230
2231static int tvp5150_remove(struct i2c_client *c)
2232{
2233        struct v4l2_subdev *sd = i2c_get_clientdata(c);
2234        struct tvp5150 *decoder = to_tvp5150(sd);
2235        unsigned int i;
2236
2237        dev_dbg_lvl(sd->dev, 1, debug,
2238                "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
2239                c->addr << 1);
2240
2241        for (i = 0; i < decoder->connectors_num; i++)
2242                v4l2_fwnode_connector_free(&decoder->connectors[i].base);
2243        for (i = 0; i < decoder->connectors_num; i++) {
2244                media_device_unregister_entity(&decoder->connectors[i].ent);
2245                media_entity_cleanup(&decoder->connectors[i].ent);
2246        }
2247        v4l2_async_unregister_subdev(sd);
2248        v4l2_ctrl_handler_free(&decoder->hdl);
2249        pm_runtime_disable(&c->dev);
2250        pm_runtime_set_suspended(&c->dev);
2251
2252        return 0;
2253}
2254
2255/* ----------------------------------------------------------------------- */
2256
2257static const struct dev_pm_ops tvp5150_pm_ops = {
2258        SET_RUNTIME_PM_OPS(tvp5150_runtime_suspend,
2259                           tvp5150_runtime_resume,
2260                           NULL)
2261};
2262
2263static const struct i2c_device_id tvp5150_id[] = {
2264        { "tvp5150", 0 },
2265        { }
2266};
2267MODULE_DEVICE_TABLE(i2c, tvp5150_id);
2268
2269#if IS_ENABLED(CONFIG_OF)
2270static const struct of_device_id tvp5150_of_match[] = {
2271        { .compatible = "ti,tvp5150", },
2272        { /* sentinel */ },
2273};
2274MODULE_DEVICE_TABLE(of, tvp5150_of_match);
2275#endif
2276
2277static struct i2c_driver tvp5150_driver = {
2278        .driver = {
2279                .of_match_table = of_match_ptr(tvp5150_of_match),
2280                .name   = "tvp5150",
2281                .pm     = &tvp5150_pm_ops,
2282        },
2283        .probe_new      = tvp5150_probe,
2284        .remove         = tvp5150_remove,
2285        .id_table       = tvp5150_id,
2286};
2287
2288module_i2c_driver(tvp5150_driver);
2289