linux/drivers/media/pci/ngene/ngene-cards.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * ngene-cards.c: nGene PCIe bridge driver - card specific info
   4 *
   5 * Copyright (C) 2005-2007 Micronas
   6 *
   7 * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
   8 *                         Modifications for new nGene firmware,
   9 *                         support for EEPROM-copying,
  10 *                         support for new dual DVB-S2 card prototype
  11 */
  12
  13#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  14
  15#include <linux/module.h>
  16#include <linux/init.h>
  17#include <linux/pci.h>
  18#include <linux/pci_ids.h>
  19
  20#include "ngene.h"
  21
  22/* demods/tuners */
  23#include "stv6110x.h"
  24#include "stv090x.h"
  25#include "lnbh24.h"
  26#include "lgdt330x.h"
  27#include "mt2131.h"
  28#include "tda18271c2dd.h"
  29#include "drxk.h"
  30#include "drxd.h"
  31#include "dvb-pll.h"
  32#include "stv0367.h"
  33#include "stv0367_priv.h"
  34#include "tda18212.h"
  35#include "cxd2841er.h"
  36#include "stv0910.h"
  37#include "stv6111.h"
  38#include "lnbh25.h"
  39
  40/****************************************************************************/
  41/* I2C transfer functions used for demod/tuner probing***********************/
  42/****************************************************************************/
  43
  44static int i2c_io(struct i2c_adapter *adapter, u8 adr,
  45                  u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen)
  46{
  47        struct i2c_msg msgs[2] = {{.addr = adr,  .flags = 0,
  48                                   .buf  = wbuf, .len   = wlen },
  49                                  {.addr = adr,  .flags = I2C_M_RD,
  50                                   .buf  = rbuf,  .len   = rlen } };
  51        return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
  52}
  53
  54static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
  55{
  56        struct i2c_msg msg = {.addr = adr, .flags = 0,
  57                              .buf = data, .len = len};
  58
  59        return (i2c_transfer(adap, &msg, 1) == 1) ? 0 : -1;
  60}
  61
  62static int i2c_write_reg(struct i2c_adapter *adap, u8 adr,
  63                         u8 reg, u8 val)
  64{
  65        u8 msg[2] = {reg, val};
  66
  67        return i2c_write(adap, adr, msg, 2);
  68}
  69
  70static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
  71{
  72        struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
  73                                   .buf  = val,  .len   = 1 } };
  74        return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
  75}
  76
  77static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
  78                          u16 reg, u8 *val)
  79{
  80        u8 msg[2] = {reg >> 8, reg & 0xff};
  81        struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
  82                                   .buf  = msg, .len   = 2},
  83                                  {.addr = adr, .flags = I2C_M_RD,
  84                                   .buf  = val, .len   = 1} };
  85        return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
  86}
  87
  88static int i2c_read_regs(struct i2c_adapter *adapter,
  89                         u8 adr, u8 reg, u8 *val, u8 len)
  90{
  91        struct i2c_msg msgs[2] = {{.addr = adr,  .flags = 0,
  92                                   .buf  = &reg, .len   = 1},
  93                                  {.addr = adr,  .flags = I2C_M_RD,
  94                                   .buf  = val,  .len   = len} };
  95
  96        return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
  97}
  98
  99static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val)
 100{
 101        return i2c_read_regs(adapter, adr, reg, val, 1);
 102}
 103
 104/****************************************************************************/
 105/* Demod/tuner attachment ***************************************************/
 106/****************************************************************************/
 107
 108static struct i2c_adapter *i2c_adapter_from_chan(struct ngene_channel *chan)
 109{
 110        /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
 111        if (chan->number < 2)
 112                return &chan->dev->channel[0].i2c_adapter;
 113
 114        return &chan->dev->channel[1].i2c_adapter;
 115}
 116
 117static int tuner_attach_stv6110(struct ngene_channel *chan)
 118{
 119        struct device *pdev = &chan->dev->pci_dev->dev;
 120        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 121        struct stv090x_config *feconf = (struct stv090x_config *)
 122                chan->dev->card_info->fe_config[chan->number];
 123        struct stv6110x_config *tunerconf = (struct stv6110x_config *)
 124                chan->dev->card_info->tuner_config[chan->number];
 125        const struct stv6110x_devctl *ctl;
 126
 127        ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c);
 128        if (ctl == NULL) {
 129                dev_err(pdev, "No STV6110X found!\n");
 130                return -ENODEV;
 131        }
 132
 133        feconf->tuner_init          = ctl->tuner_init;
 134        feconf->tuner_sleep         = ctl->tuner_sleep;
 135        feconf->tuner_set_mode      = ctl->tuner_set_mode;
 136        feconf->tuner_set_frequency = ctl->tuner_set_frequency;
 137        feconf->tuner_get_frequency = ctl->tuner_get_frequency;
 138        feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
 139        feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
 140        feconf->tuner_set_bbgain    = ctl->tuner_set_bbgain;
 141        feconf->tuner_get_bbgain    = ctl->tuner_get_bbgain;
 142        feconf->tuner_set_refclk    = ctl->tuner_set_refclk;
 143        feconf->tuner_get_status    = ctl->tuner_get_status;
 144
 145        return 0;
 146}
 147
 148static int tuner_attach_stv6111(struct ngene_channel *chan)
 149{
 150        struct device *pdev = &chan->dev->pci_dev->dev;
 151        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 152        struct dvb_frontend *fe;
 153        u8 adr = 4 + ((chan->number & 1) ? 0x63 : 0x60);
 154
 155        fe = dvb_attach(stv6111_attach, chan->fe, i2c, adr);
 156        if (!fe) {
 157                fe = dvb_attach(stv6111_attach, chan->fe, i2c, adr & ~4);
 158                if (!fe) {
 159                        dev_err(pdev, "stv6111_attach() failed!\n");
 160                        return -ENODEV;
 161                }
 162        }
 163        return 0;
 164}
 165
 166static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
 167{
 168        struct ngene_channel *chan = fe->sec_priv;
 169        int status;
 170
 171        if (enable) {
 172                down(&chan->dev->pll_mutex);
 173                status = chan->gate_ctrl(fe, 1);
 174        } else {
 175                status = chan->gate_ctrl(fe, 0);
 176                up(&chan->dev->pll_mutex);
 177        }
 178        return status;
 179}
 180
 181static int tuner_attach_tda18271(struct ngene_channel *chan)
 182{
 183        struct device *pdev = &chan->dev->pci_dev->dev;
 184        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 185        struct dvb_frontend *fe;
 186
 187        if (chan->fe->ops.i2c_gate_ctrl)
 188                chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
 189        fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
 190        if (chan->fe->ops.i2c_gate_ctrl)
 191                chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
 192        if (!fe) {
 193                dev_err(pdev, "No TDA18271 found!\n");
 194                return -ENODEV;
 195        }
 196
 197        return 0;
 198}
 199
 200static int tuner_tda18212_ping(struct ngene_channel *chan,
 201                               struct i2c_adapter *i2c,
 202                               unsigned short adr)
 203{
 204        struct device *pdev = &chan->dev->pci_dev->dev;
 205        u8 tda_id[2];
 206        u8 subaddr = 0x00;
 207
 208        dev_dbg(pdev, "stv0367-tda18212 tuner ping\n");
 209        if (chan->fe->ops.i2c_gate_ctrl)
 210                chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
 211
 212        if (i2c_read_regs(i2c, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
 213                dev_dbg(pdev, "tda18212 ping 1 fail\n");
 214        if (i2c_read_regs(i2c, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
 215                dev_warn(pdev, "tda18212 ping failed, expect problems\n");
 216
 217        if (chan->fe->ops.i2c_gate_ctrl)
 218                chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
 219
 220        return 0;
 221}
 222
 223static int tuner_attach_tda18212(struct ngene_channel *chan, u32 dmdtype)
 224{
 225        struct device *pdev = &chan->dev->pci_dev->dev;
 226        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 227        struct i2c_client *client;
 228        struct tda18212_config config = {
 229                .fe = chan->fe,
 230                .if_dvbt_6 = 3550,
 231                .if_dvbt_7 = 3700,
 232                .if_dvbt_8 = 4150,
 233                .if_dvbt2_6 = 3250,
 234                .if_dvbt2_7 = 4000,
 235                .if_dvbt2_8 = 4000,
 236                .if_dvbc = 5000,
 237        };
 238        u8 addr = (chan->number & 1) ? 0x63 : 0x60;
 239
 240        /*
 241         * due to a hardware quirk with the I2C gate on the stv0367+tda18212
 242         * combo, the tda18212 must be probed by reading it's id _twice_ when
 243         * cold started, or it very likely will fail.
 244         */
 245        if (dmdtype == DEMOD_TYPE_STV0367)
 246                tuner_tda18212_ping(chan, i2c, addr);
 247
 248        /* perform tuner probe/init/attach */
 249        client = dvb_module_probe("tda18212", NULL, i2c, addr, &config);
 250        if (!client)
 251                goto err;
 252
 253        chan->i2c_client[0] = client;
 254        chan->i2c_client_fe = 1;
 255
 256        return 0;
 257err:
 258        dev_err(pdev, "TDA18212 tuner not found. Device is not fully operational.\n");
 259        return -ENODEV;
 260}
 261
 262static int tuner_attach_probe(struct ngene_channel *chan)
 263{
 264        switch (chan->demod_type) {
 265        case DEMOD_TYPE_STV090X:
 266                return tuner_attach_stv6110(chan);
 267        case DEMOD_TYPE_DRXK:
 268                return tuner_attach_tda18271(chan);
 269        case DEMOD_TYPE_STV0367:
 270        case DEMOD_TYPE_SONY_CT2:
 271        case DEMOD_TYPE_SONY_ISDBT:
 272        case DEMOD_TYPE_SONY_C2T2:
 273        case DEMOD_TYPE_SONY_C2T2I:
 274                return tuner_attach_tda18212(chan, chan->demod_type);
 275        case DEMOD_TYPE_STV0910:
 276                return tuner_attach_stv6111(chan);
 277        }
 278
 279        return -EINVAL;
 280}
 281
 282static int demod_attach_stv0900(struct ngene_channel *chan)
 283{
 284        struct device *pdev = &chan->dev->pci_dev->dev;
 285        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 286        struct stv090x_config *feconf = (struct stv090x_config *)
 287                chan->dev->card_info->fe_config[chan->number];
 288
 289        chan->fe = dvb_attach(stv090x_attach, feconf, i2c,
 290                        (chan->number & 1) == 0 ? STV090x_DEMODULATOR_0
 291                                                : STV090x_DEMODULATOR_1);
 292        if (chan->fe == NULL) {
 293                dev_err(pdev, "No STV0900 found!\n");
 294                return -ENODEV;
 295        }
 296
 297        /* store channel info */
 298        if (feconf->tuner_i2c_lock)
 299                chan->fe->analog_demod_priv = chan;
 300
 301        if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0,
 302                        0, chan->dev->card_info->lnb[chan->number])) {
 303                dev_err(pdev, "No LNBH24 found!\n");
 304                dvb_frontend_detach(chan->fe);
 305                chan->fe = NULL;
 306                return -ENODEV;
 307        }
 308
 309        return 0;
 310}
 311
 312static struct stv0910_cfg stv0910_p = {
 313        .adr      = 0x68,
 314        .parallel = 1,
 315        .rptlvl   = 4,
 316        .clk      = 30000000,
 317        .tsspeed  = 0x28,
 318};
 319
 320static struct lnbh25_config lnbh25_cfg = {
 321        .i2c_address = 0x0c << 1,
 322        .data2_config = LNBH25_TEN
 323};
 324
 325static int demod_attach_stv0910(struct ngene_channel *chan,
 326                                struct i2c_adapter *i2c)
 327{
 328        struct device *pdev = &chan->dev->pci_dev->dev;
 329        struct stv0910_cfg cfg = stv0910_p;
 330        struct lnbh25_config lnbcfg = lnbh25_cfg;
 331
 332        chan->fe = dvb_attach(stv0910_attach, i2c, &cfg, (chan->number & 1));
 333        if (!chan->fe) {
 334                cfg.adr = 0x6c;
 335                chan->fe = dvb_attach(stv0910_attach, i2c,
 336                                      &cfg, (chan->number & 1));
 337        }
 338        if (!chan->fe) {
 339                dev_err(pdev, "stv0910_attach() failed!\n");
 340                return -ENODEV;
 341        }
 342
 343        /*
 344         * attach lnbh25 - leftshift by one as the lnbh25 driver expects 8bit
 345         * i2c addresses
 346         */
 347        lnbcfg.i2c_address = (((chan->number & 1) ? 0x0d : 0x0c) << 1);
 348        if (!dvb_attach(lnbh25_attach, chan->fe, &lnbcfg, i2c)) {
 349                lnbcfg.i2c_address = (((chan->number & 1) ? 0x09 : 0x08) << 1);
 350                if (!dvb_attach(lnbh25_attach, chan->fe, &lnbcfg, i2c)) {
 351                        dev_err(pdev, "lnbh25_attach() failed!\n");
 352                        dvb_frontend_detach(chan->fe);
 353                        chan->fe = NULL;
 354                        return -ENODEV;
 355                }
 356        }
 357
 358        return 0;
 359}
 360
 361static struct stv0367_config ddb_stv0367_config[] = {
 362        {
 363                .demod_address = 0x1f,
 364                .xtal = 27000000,
 365                .if_khz = 0,
 366                .if_iq_mode = FE_TER_NORMAL_IF_TUNER,
 367                .ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
 368                .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
 369        }, {
 370                .demod_address = 0x1e,
 371                .xtal = 27000000,
 372                .if_khz = 0,
 373                .if_iq_mode = FE_TER_NORMAL_IF_TUNER,
 374                .ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
 375                .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
 376        },
 377};
 378
 379static int demod_attach_stv0367(struct ngene_channel *chan,
 380                                struct i2c_adapter *i2c)
 381{
 382        struct device *pdev = &chan->dev->pci_dev->dev;
 383
 384        chan->fe = dvb_attach(stv0367ddb_attach,
 385                              &ddb_stv0367_config[(chan->number & 1)], i2c);
 386
 387        if (!chan->fe) {
 388                dev_err(pdev, "stv0367ddb_attach() failed!\n");
 389                return -ENODEV;
 390        }
 391
 392        chan->fe->sec_priv = chan;
 393        chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
 394        chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
 395        return 0;
 396}
 397
 398static int demod_attach_cxd28xx(struct ngene_channel *chan,
 399                                struct i2c_adapter *i2c, int osc24)
 400{
 401        struct device *pdev = &chan->dev->pci_dev->dev;
 402        struct cxd2841er_config cfg;
 403
 404        /* the cxd2841er driver expects 8bit/shifted I2C addresses */
 405        cfg.i2c_addr = ((chan->number & 1) ? 0x6d : 0x6c) << 1;
 406
 407        cfg.xtal = osc24 ? SONY_XTAL_24000 : SONY_XTAL_20500;
 408        cfg.flags = CXD2841ER_AUTO_IFHZ | CXD2841ER_EARLY_TUNE |
 409                CXD2841ER_NO_WAIT_LOCK | CXD2841ER_NO_AGCNEG |
 410                CXD2841ER_TSBITS | CXD2841ER_TS_SERIAL;
 411
 412        /* attach frontend */
 413        chan->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c);
 414
 415        if (!chan->fe) {
 416                dev_err(pdev, "CXD28XX attach failed!\n");
 417                return -ENODEV;
 418        }
 419
 420        chan->fe->sec_priv = chan;
 421        chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
 422        chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
 423        return 0;
 424}
 425
 426static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
 427{
 428        struct ngene_channel *chan = fe->analog_demod_priv;
 429
 430        if (lock)
 431                down(&chan->dev->pll_mutex);
 432        else
 433                up(&chan->dev->pll_mutex);
 434}
 435
 436static int port_has_stv0900(struct i2c_adapter *i2c, int port)
 437{
 438        u8 val;
 439        if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
 440                return 0;
 441        return 1;
 442}
 443
 444static int port_has_drxk(struct i2c_adapter *i2c, int port)
 445{
 446        u8 val;
 447
 448        if (i2c_read(i2c, 0x29+port, &val) < 0)
 449                return 0;
 450        return 1;
 451}
 452
 453static int port_has_stv0367(struct i2c_adapter *i2c)
 454{
 455        u8 val;
 456
 457        if (i2c_read_reg16(i2c, 0x1e, 0xf000, &val) < 0)
 458                return 0;
 459        if (val != 0x60)
 460                return 0;
 461        if (i2c_read_reg16(i2c, 0x1f, 0xf000, &val) < 0)
 462                return 0;
 463        if (val != 0x60)
 464                return 0;
 465        return 1;
 466}
 467
 468int ngene_port_has_cxd2099(struct i2c_adapter *i2c, u8 *type)
 469{
 470        u8 val;
 471        u8 probe[4] = { 0xe0, 0x00, 0x00, 0x00 }, data[4];
 472        struct i2c_msg msgs[2] = {{ .addr = 0x40,  .flags = 0,
 473                                    .buf  = probe, .len   = 4 },
 474                                  { .addr = 0x40,  .flags = I2C_M_RD,
 475                                    .buf  = data,  .len   = 4 } };
 476        val = i2c_transfer(i2c, msgs, 2);
 477        if (val != 2)
 478                return 0;
 479
 480        if (data[0] == 0x02 && data[1] == 0x2b && data[3] == 0x43)
 481                *type = 2;
 482        else
 483                *type = 1;
 484        return 1;
 485}
 486
 487static int demod_attach_drxk(struct ngene_channel *chan,
 488                             struct i2c_adapter *i2c)
 489{
 490        struct device *pdev = &chan->dev->pci_dev->dev;
 491        struct drxk_config config;
 492
 493        memset(&config, 0, sizeof(config));
 494        config.microcode_name = "drxk_a3.mc";
 495        config.qam_demod_parameter_count = 4;
 496        config.adr = 0x29 + (chan->number ^ 2);
 497
 498        chan->fe = dvb_attach(drxk_attach, &config, i2c);
 499        if (!chan->fe) {
 500                dev_err(pdev, "No DRXK found!\n");
 501                return -ENODEV;
 502        }
 503        chan->fe->sec_priv = chan;
 504        chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
 505        chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
 506        return 0;
 507}
 508
 509/****************************************************************************/
 510/* XO2 related lists and functions ******************************************/
 511/****************************************************************************/
 512
 513static char *xo2names[] = {
 514        "DUAL DVB-S2",
 515        "DUAL DVB-C/T/T2",
 516        "DUAL DVB-ISDBT",
 517        "DUAL DVB-C/C2/T/T2",
 518        "DUAL ATSC",
 519        "DUAL DVB-C/C2/T/T2/I",
 520};
 521
 522static int init_xo2(struct ngene_channel *chan, struct i2c_adapter *i2c)
 523{
 524        struct device *pdev = &chan->dev->pci_dev->dev;
 525        u8 addr = 0x10;
 526        u8 val, data[2];
 527        int res;
 528
 529        res = i2c_read_regs(i2c, addr, 0x04, data, 2);
 530        if (res < 0)
 531                return res;
 532
 533        if (data[0] != 0x01)  {
 534                dev_info(pdev, "Invalid XO2 on channel %d\n", chan->number);
 535                return -1;
 536        }
 537
 538        i2c_read_reg(i2c, addr, 0x08, &val);
 539        if (val != 0) {
 540                i2c_write_reg(i2c, addr, 0x08, 0x00);
 541                msleep(100);
 542        }
 543        /* Enable tuner power, disable pll, reset demods */
 544        i2c_write_reg(i2c, addr, 0x08, 0x04);
 545        usleep_range(2000, 3000);
 546        /* Release demod resets */
 547        i2c_write_reg(i2c, addr, 0x08, 0x07);
 548
 549        /*
 550         * speed: 0=55,1=75,2=90,3=104 MBit/s
 551         * Note: The ngene hardware must be run at 75 MBit/s compared
 552         * to more modern ddbridge hardware which runs at 90 MBit/s,
 553         * else there will be issues with the data transport and non-
 554         * working secondary/slave demods/tuners.
 555         */
 556        i2c_write_reg(i2c, addr, 0x09, 1);
 557
 558        i2c_write_reg(i2c, addr, 0x0a, 0x01);
 559        i2c_write_reg(i2c, addr, 0x0b, 0x01);
 560
 561        usleep_range(2000, 3000);
 562        /* Start XO2 PLL */
 563        i2c_write_reg(i2c, addr, 0x08, 0x87);
 564
 565        return 0;
 566}
 567
 568static int port_has_xo2(struct i2c_adapter *i2c, u8 *type, u8 *id)
 569{
 570        u8 probe[1] = { 0x00 }, data[4];
 571        u8 addr = 0x10;
 572
 573        *type = NGENE_XO2_TYPE_NONE;
 574
 575        if (i2c_io(i2c, addr, probe, 1, data, 4))
 576                return 0;
 577        if (data[0] == 'D' && data[1] == 'F') {
 578                *id = data[2];
 579                *type = NGENE_XO2_TYPE_DUOFLEX;
 580                return 1;
 581        }
 582        if (data[0] == 'C' && data[1] == 'I') {
 583                *id = data[2];
 584                *type = NGENE_XO2_TYPE_CI;
 585                return 1;
 586        }
 587        return 0;
 588}
 589
 590/****************************************************************************/
 591/* Probing and port/channel handling ****************************************/
 592/****************************************************************************/
 593
 594static int cineS2_probe(struct ngene_channel *chan)
 595{
 596        struct device *pdev = &chan->dev->pci_dev->dev;
 597        struct i2c_adapter *i2c = i2c_adapter_from_chan(chan);
 598        struct stv090x_config *fe_conf;
 599        u8 buf[3];
 600        u8 xo2_type, xo2_id, xo2_demodtype;
 601        u8 sony_osc24 = 0;
 602        struct i2c_msg i2c_msg = { .flags = 0, .buf = buf };
 603        int rc;
 604
 605        if (port_has_xo2(i2c, &xo2_type, &xo2_id)) {
 606                xo2_id >>= 2;
 607                dev_dbg(pdev, "XO2 on channel %d (type %d, id %d)\n",
 608                        chan->number, xo2_type, xo2_id);
 609
 610                switch (xo2_type) {
 611                case NGENE_XO2_TYPE_DUOFLEX:
 612                        if (chan->number & 1)
 613                                dev_dbg(pdev,
 614                                        "skipping XO2 init on odd channel %d",
 615                                        chan->number);
 616                        else
 617                                init_xo2(chan, i2c);
 618
 619                        xo2_demodtype = DEMOD_TYPE_XO2 + xo2_id;
 620
 621                        switch (xo2_demodtype) {
 622                        case DEMOD_TYPE_SONY_CT2:
 623                        case DEMOD_TYPE_SONY_ISDBT:
 624                        case DEMOD_TYPE_SONY_C2T2:
 625                        case DEMOD_TYPE_SONY_C2T2I:
 626                                dev_info(pdev, "%s (XO2) on channel %d\n",
 627                                         xo2names[xo2_id], chan->number);
 628                                chan->demod_type = xo2_demodtype;
 629                                if (xo2_demodtype == DEMOD_TYPE_SONY_C2T2I)
 630                                        sony_osc24 = 1;
 631
 632                                demod_attach_cxd28xx(chan, i2c, sony_osc24);
 633                                break;
 634                        case DEMOD_TYPE_STV0910:
 635                                dev_info(pdev, "%s (XO2) on channel %d\n",
 636                                         xo2names[xo2_id], chan->number);
 637                                chan->demod_type = xo2_demodtype;
 638                                demod_attach_stv0910(chan, i2c);
 639                                break;
 640                        default:
 641                                dev_warn(pdev,
 642                                         "Unsupported XO2 module on channel %d\n",
 643                                         chan->number);
 644                                return -ENODEV;
 645                        }
 646                        break;
 647                case NGENE_XO2_TYPE_CI:
 648                        dev_info(pdev, "DuoFlex CI modules not supported\n");
 649                        return -ENODEV;
 650                default:
 651                        dev_info(pdev, "Unsupported XO2 module type\n");
 652                        return -ENODEV;
 653                }
 654        } else if (port_has_stv0900(i2c, chan->number)) {
 655                chan->demod_type = DEMOD_TYPE_STV090X;
 656                fe_conf = chan->dev->card_info->fe_config[chan->number];
 657                /* demod found, attach it */
 658                rc = demod_attach_stv0900(chan);
 659                if (rc < 0 || chan->number < 2)
 660                        return rc;
 661
 662                /* demod #2: reprogram outputs DPN1 & DPN2 */
 663                i2c_msg.addr = fe_conf->address;
 664                i2c_msg.len = 3;
 665                buf[0] = 0xf1;
 666                switch (chan->number) {
 667                case 2:
 668                        buf[1] = 0x5c;
 669                        buf[2] = 0xc2;
 670                        break;
 671                case 3:
 672                        buf[1] = 0x61;
 673                        buf[2] = 0xcc;
 674                        break;
 675                default:
 676                        return -ENODEV;
 677                }
 678                rc = i2c_transfer(i2c, &i2c_msg, 1);
 679                if (rc != 1) {
 680                        dev_err(pdev, "Could not setup DPNx\n");
 681                        return -EIO;
 682                }
 683        } else if (port_has_drxk(i2c, chan->number^2)) {
 684                chan->demod_type = DEMOD_TYPE_DRXK;
 685                demod_attach_drxk(chan, i2c);
 686        } else if (port_has_stv0367(i2c)) {
 687                chan->demod_type = DEMOD_TYPE_STV0367;
 688                dev_info(pdev, "STV0367 on channel %d\n", chan->number);
 689                demod_attach_stv0367(chan, i2c);
 690        } else {
 691                dev_info(pdev, "No demod found on chan %d\n", chan->number);
 692                return -ENODEV;
 693        }
 694        return 0;
 695}
 696
 697
 698static struct lgdt330x_config aver_m780 = {
 699        .demod_chip    = LGDT3303,
 700        .serial_mpeg   = 0x00, /* PARALLEL */
 701        .clock_polarity_flip = 1,
 702};
 703
 704static struct mt2131_config m780_tunerconfig = {
 705        0xc0 >> 1
 706};
 707
 708/* A single func to attach the demo and tuner, rather than
 709 * use two sep funcs like the current design mandates.
 710 */
 711static int demod_attach_lg330x(struct ngene_channel *chan)
 712{
 713        struct device *pdev = &chan->dev->pci_dev->dev;
 714
 715        chan->fe = dvb_attach(lgdt330x_attach, &aver_m780,
 716                              0xb2 >> 1, &chan->i2c_adapter);
 717        if (chan->fe == NULL) {
 718                dev_err(pdev, "No LGDT330x found!\n");
 719                return -ENODEV;
 720        }
 721
 722        dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter,
 723                   &m780_tunerconfig, 0);
 724
 725        return (chan->fe) ? 0 : -ENODEV;
 726}
 727
 728static int demod_attach_drxd(struct ngene_channel *chan)
 729{
 730        struct device *pdev = &chan->dev->pci_dev->dev;
 731        struct drxd_config *feconf;
 732
 733        feconf = chan->dev->card_info->fe_config[chan->number];
 734
 735        chan->fe = dvb_attach(drxd_attach, feconf, chan,
 736                        &chan->i2c_adapter, &chan->dev->pci_dev->dev);
 737        if (!chan->fe) {
 738                dev_err(pdev, "No DRXD found!\n");
 739                return -ENODEV;
 740        }
 741        return 0;
 742}
 743
 744static int tuner_attach_dtt7520x(struct ngene_channel *chan)
 745{
 746        struct device *pdev = &chan->dev->pci_dev->dev;
 747        struct drxd_config *feconf;
 748
 749        feconf = chan->dev->card_info->fe_config[chan->number];
 750
 751        if (!dvb_attach(dvb_pll_attach, chan->fe, feconf->pll_address,
 752                        &chan->i2c_adapter,
 753                        feconf->pll_type)) {
 754                dev_err(pdev, "No pll(%d) found!\n", feconf->pll_type);
 755                return -ENODEV;
 756        }
 757        return 0;
 758}
 759
 760/****************************************************************************/
 761/* EEPROM TAGS **************************************************************/
 762/****************************************************************************/
 763
 764#define MICNG_EE_START      0x0100
 765#define MICNG_EE_END        0x0FF0
 766
 767#define MICNG_EETAG_END0    0x0000
 768#define MICNG_EETAG_END1    0xFFFF
 769
 770/* 0x0001 - 0x000F reserved for housekeeping */
 771/* 0xFFFF - 0xFFFE reserved for housekeeping */
 772
 773/* Micronas assigned tags
 774   EEProm tags for hardware support */
 775
 776#define MICNG_EETAG_DRXD1_OSCDEVIATION  0x1000  /* 2 Bytes data */
 777#define MICNG_EETAG_DRXD2_OSCDEVIATION  0x1001  /* 2 Bytes data */
 778
 779#define MICNG_EETAG_MT2060_1_1STIF      0x1100  /* 2 Bytes data */
 780#define MICNG_EETAG_MT2060_2_1STIF      0x1101  /* 2 Bytes data */
 781
 782/* Tag range for OEMs */
 783
 784#define MICNG_EETAG_OEM_FIRST  0xC000
 785#define MICNG_EETAG_OEM_LAST   0xFFEF
 786
 787static int i2c_write_eeprom(struct i2c_adapter *adapter,
 788                            u8 adr, u16 reg, u8 data)
 789{
 790        struct device *pdev = adapter->dev.parent;
 791        u8 m[3] = {(reg >> 8), (reg & 0xff), data};
 792        struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = m,
 793                              .len = sizeof(m)};
 794
 795        if (i2c_transfer(adapter, &msg, 1) != 1) {
 796                dev_err(pdev, "Error writing EEPROM!\n");
 797                return -EIO;
 798        }
 799        return 0;
 800}
 801
 802static int i2c_read_eeprom(struct i2c_adapter *adapter,
 803                           u8 adr, u16 reg, u8 *data, int len)
 804{
 805        struct device *pdev = adapter->dev.parent;
 806        u8 msg[2] = {(reg >> 8), (reg & 0xff)};
 807        struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
 808                                   .buf = msg, .len = 2 },
 809                                  {.addr = adr, .flags = I2C_M_RD,
 810                                   .buf = data, .len = len} };
 811
 812        if (i2c_transfer(adapter, msgs, 2) != 2) {
 813                dev_err(pdev, "Error reading EEPROM\n");
 814                return -EIO;
 815        }
 816        return 0;
 817}
 818
 819static int ReadEEProm(struct i2c_adapter *adapter,
 820                      u16 Tag, u32 MaxLen, u8 *data, u32 *pLength)
 821{
 822        struct device *pdev = adapter->dev.parent;
 823        int status = 0;
 824        u16 Addr = MICNG_EE_START, Length, tag = 0;
 825        u8  EETag[3];
 826
 827        while (Addr + sizeof(u16) + 1 < MICNG_EE_END) {
 828                if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag)))
 829                        return -1;
 830                tag = (EETag[0] << 8) | EETag[1];
 831                if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1)
 832                        return -1;
 833                if (tag == Tag)
 834                        break;
 835                Addr += sizeof(u16) + 1 + EETag[2];
 836        }
 837        if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) {
 838                dev_err(pdev, "Reached EOEE @ Tag = %04x Length = %3d\n",
 839                        tag, EETag[2]);
 840                return -1;
 841        }
 842        Length = EETag[2];
 843        if (Length > MaxLen)
 844                Length = (u16) MaxLen;
 845        if (Length > 0) {
 846                Addr += sizeof(u16) + 1;
 847                status = i2c_read_eeprom(adapter, 0x50, Addr, data, Length);
 848                if (!status) {
 849                        *pLength = EETag[2];
 850#if 0
 851                        if (Length < EETag[2])
 852                                status = STATUS_BUFFER_OVERFLOW;
 853#endif
 854                }
 855        }
 856        return status;
 857}
 858
 859static int WriteEEProm(struct i2c_adapter *adapter,
 860                       u16 Tag, u32 Length, u8 *data)
 861{
 862        struct device *pdev = adapter->dev.parent;
 863        int status = 0;
 864        u16 Addr = MICNG_EE_START;
 865        u8 EETag[3];
 866        u16 tag = 0;
 867        int retry, i;
 868
 869        while (Addr + sizeof(u16) + 1 < MICNG_EE_END) {
 870                if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag)))
 871                        return -1;
 872                tag = (EETag[0] << 8) | EETag[1];
 873                if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1)
 874                        return -1;
 875                if (tag == Tag)
 876                        break;
 877                Addr += sizeof(u16) + 1 + EETag[2];
 878        }
 879        if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) {
 880                dev_err(pdev, "Reached EOEE @ Tag = %04x Length = %3d\n",
 881                        tag, EETag[2]);
 882                return -1;
 883        }
 884
 885        if (Length > EETag[2])
 886                return -EINVAL;
 887        /* Note: We write the data one byte at a time to avoid
 888           issues with page sizes. (which are different for
 889           each manufacture and eeprom size)
 890         */
 891        Addr += sizeof(u16) + 1;
 892        for (i = 0; i < Length; i++, Addr++) {
 893                status = i2c_write_eeprom(adapter, 0x50, Addr, data[i]);
 894
 895                if (status)
 896                        break;
 897
 898                /* Poll for finishing write cycle */
 899                retry = 10;
 900                while (retry) {
 901                        u8 Tmp;
 902
 903                        msleep(50);
 904                        status = i2c_read_eeprom(adapter, 0x50, Addr, &Tmp, 1);
 905                        if (status)
 906                                break;
 907                        if (Tmp != data[i])
 908                                dev_err(pdev, "eeprom write error\n");
 909                        retry -= 1;
 910                }
 911                if (status) {
 912                        dev_err(pdev, "Timeout polling eeprom\n");
 913                        break;
 914                }
 915        }
 916        return status;
 917}
 918
 919static int eeprom_read_ushort(struct i2c_adapter *adapter, u16 tag, u16 *data)
 920{
 921        int stat;
 922        u8 buf[2];
 923        u32 len = 0;
 924
 925        stat = ReadEEProm(adapter, tag, 2, buf, &len);
 926        if (stat)
 927                return stat;
 928        if (len != 2)
 929                return -EINVAL;
 930
 931        *data = (buf[0] << 8) | buf[1];
 932        return 0;
 933}
 934
 935static int eeprom_write_ushort(struct i2c_adapter *adapter, u16 tag, u16 data)
 936{
 937        u8 buf[2];
 938
 939        buf[0] = data >> 8;
 940        buf[1] = data & 0xff;
 941        return WriteEEProm(adapter, tag, 2, buf);
 942}
 943
 944static s16 osc_deviation(void *priv, s16 deviation, int flag)
 945{
 946        struct ngene_channel *chan = priv;
 947        struct device *pdev = &chan->dev->pci_dev->dev;
 948        struct i2c_adapter *adap = &chan->i2c_adapter;
 949        u16 data = 0;
 950
 951        if (flag) {
 952                data = (u16) deviation;
 953                dev_info(pdev, "write deviation %d\n",
 954                         deviation);
 955                eeprom_write_ushort(adap, 0x1000 + chan->number, data);
 956        } else {
 957                if (eeprom_read_ushort(adap, 0x1000 + chan->number, &data))
 958                        data = 0;
 959                dev_info(pdev, "read deviation %d\n",
 960                         (s16)data);
 961        }
 962
 963        return (s16) data;
 964}
 965
 966/****************************************************************************/
 967/* Switch control (I2C gates, etc.) *****************************************/
 968/****************************************************************************/
 969
 970
 971static struct stv090x_config fe_cineS2 = {
 972        .device         = STV0900,
 973        .demod_mode     = STV090x_DUAL,
 974        .clk_mode       = STV090x_CLK_EXT,
 975
 976        .xtal           = 27000000,
 977        .address        = 0x68,
 978
 979        .ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
 980        .ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
 981
 982        .repeater_level = STV090x_RPTLEVEL_16,
 983
 984        .adc1_range     = STV090x_ADC_1Vpp,
 985        .adc2_range     = STV090x_ADC_1Vpp,
 986
 987        .diseqc_envelope_mode = true,
 988
 989        .tuner_i2c_lock = cineS2_tuner_i2c_lock,
 990};
 991
 992static struct stv090x_config fe_cineS2_2 = {
 993        .device         = STV0900,
 994        .demod_mode     = STV090x_DUAL,
 995        .clk_mode       = STV090x_CLK_EXT,
 996
 997        .xtal           = 27000000,
 998        .address        = 0x69,
 999
1000        .ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
1001        .ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
1002
1003        .repeater_level = STV090x_RPTLEVEL_16,
1004
1005        .adc1_range     = STV090x_ADC_1Vpp,
1006        .adc2_range     = STV090x_ADC_1Vpp,
1007
1008        .diseqc_envelope_mode = true,
1009
1010        .tuner_i2c_lock = cineS2_tuner_i2c_lock,
1011};
1012
1013static struct stv6110x_config tuner_cineS2_0 = {
1014        .addr   = 0x60,
1015        .refclk = 27000000,
1016        .clk_div = 1,
1017};
1018
1019static struct stv6110x_config tuner_cineS2_1 = {
1020        .addr   = 0x63,
1021        .refclk = 27000000,
1022        .clk_div = 1,
1023};
1024
1025static const struct ngene_info ngene_info_cineS2 = {
1026        .type           = NGENE_SIDEWINDER,
1027        .name           = "Linux4Media cineS2 DVB-S2 Twin Tuner",
1028        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN},
1029        .demod_attach   = {demod_attach_stv0900, demod_attach_stv0900},
1030        .tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110},
1031        .fe_config      = {&fe_cineS2, &fe_cineS2},
1032        .tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1},
1033        .lnb            = {0x0b, 0x08},
1034        .tsf            = {3, 3},
1035        .fw_version     = 18,
1036        .msi_supported  = true,
1037};
1038
1039static const struct ngene_info ngene_info_satixS2 = {
1040        .type           = NGENE_SIDEWINDER,
1041        .name           = "Mystique SaTiX-S2 Dual",
1042        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN},
1043        .demod_attach   = {demod_attach_stv0900, demod_attach_stv0900},
1044        .tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110},
1045        .fe_config      = {&fe_cineS2, &fe_cineS2},
1046        .tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1},
1047        .lnb            = {0x0b, 0x08},
1048        .tsf            = {3, 3},
1049        .fw_version     = 18,
1050        .msi_supported  = true,
1051};
1052
1053static const struct ngene_info ngene_info_satixS2v2 = {
1054        .type           = NGENE_SIDEWINDER,
1055        .name           = "Mystique SaTiX-S2 Dual (v2)",
1056        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
1057                           NGENE_IO_TSOUT},
1058        .demod_attach   = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
1059        .tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
1060        .fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
1061        .tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
1062        .lnb            = {0x0a, 0x08, 0x0b, 0x09},
1063        .tsf            = {3, 3},
1064        .fw_version     = 18,
1065        .msi_supported  = true,
1066};
1067
1068static const struct ngene_info ngene_info_cineS2v5 = {
1069        .type           = NGENE_SIDEWINDER,
1070        .name           = "Linux4Media cineS2 DVB-S2 Twin Tuner (v5)",
1071        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
1072                           NGENE_IO_TSOUT},
1073        .demod_attach   = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
1074        .tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
1075        .fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
1076        .tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
1077        .lnb            = {0x0a, 0x08, 0x0b, 0x09},
1078        .tsf            = {3, 3},
1079        .fw_version     = 18,
1080        .msi_supported  = true,
1081};
1082
1083
1084static const struct ngene_info ngene_info_duoFlex = {
1085        .type           = NGENE_SIDEWINDER,
1086        .name           = "Digital Devices DuoFlex PCIe or miniPCIe",
1087        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
1088                           NGENE_IO_TSOUT},
1089        .demod_attach   = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe},
1090        .tuner_attach   = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe},
1091        .fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
1092        .tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
1093        .lnb            = {0x0a, 0x08, 0x0b, 0x09},
1094        .tsf            = {3, 3},
1095        .fw_version     = 18,
1096        .msi_supported  = true,
1097};
1098
1099static const struct ngene_info ngene_info_m780 = {
1100        .type           = NGENE_APP,
1101        .name           = "Aver M780 ATSC/QAM-B",
1102
1103        /* Channel 0 is analog, which is currently unsupported */
1104        .io_type        = { NGENE_IO_NONE, NGENE_IO_TSIN },
1105        .demod_attach   = { NULL, demod_attach_lg330x },
1106
1107        /* Ensure these are NULL else the frame will call them (as funcs) */
1108        .tuner_attach   = { NULL, NULL, NULL, NULL },
1109        .fe_config      = { NULL, &aver_m780 },
1110        .avf            = { 0 },
1111
1112        /* A custom electrical interface config for the demod to bridge */
1113        .tsf            = { 4, 4 },
1114        .fw_version     = 15,
1115};
1116
1117static struct drxd_config fe_terratec_dvbt_0 = {
1118        .index          = 0,
1119        .demod_address  = 0x70,
1120        .demod_revision = 0xa2,
1121        .demoda_address = 0x00,
1122        .pll_address    = 0x60,
1123        .pll_type       = DVB_PLL_THOMSON_DTT7520X,
1124        .clock          = 20000,
1125        .osc_deviation  = osc_deviation,
1126};
1127
1128static struct drxd_config fe_terratec_dvbt_1 = {
1129        .index          = 1,
1130        .demod_address  = 0x71,
1131        .demod_revision = 0xa2,
1132        .demoda_address = 0x00,
1133        .pll_address    = 0x60,
1134        .pll_type       = DVB_PLL_THOMSON_DTT7520X,
1135        .clock          = 20000,
1136        .osc_deviation  = osc_deviation,
1137};
1138
1139static const struct ngene_info ngene_info_terratec = {
1140        .type           = NGENE_TERRATEC,
1141        .name           = "Terratec Integra/Cinergy2400i Dual DVB-T",
1142        .io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN},
1143        .demod_attach   = {demod_attach_drxd, demod_attach_drxd},
1144        .tuner_attach   = {tuner_attach_dtt7520x, tuner_attach_dtt7520x},
1145        .fe_config      = {&fe_terratec_dvbt_0, &fe_terratec_dvbt_1},
1146        .i2c_access     = 1,
1147};
1148
1149/****************************************************************************/
1150
1151
1152
1153/****************************************************************************/
1154/* PCI Subsystem ID *********************************************************/
1155/****************************************************************************/
1156
1157#define NGENE_ID(_subvend, _subdev, _driverdata) { \
1158        .vendor = NGENE_VID, .device = NGENE_PID, \
1159        .subvendor = _subvend, .subdevice = _subdev, \
1160        .driver_data = (unsigned long) &_driverdata }
1161
1162/****************************************************************************/
1163
1164static const struct pci_device_id ngene_id_tbl[] = {
1165        NGENE_ID(0x18c3, 0xab04, ngene_info_cineS2),
1166        NGENE_ID(0x18c3, 0xab05, ngene_info_cineS2v5),
1167        NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2),
1168        NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2),
1169        NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
1170        NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
1171        NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
1172        NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex),
1173        NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex),
1174        NGENE_ID(0x1461, 0x062e, ngene_info_m780),
1175        NGENE_ID(0x153b, 0x1167, ngene_info_terratec),
1176        {0}
1177};
1178MODULE_DEVICE_TABLE(pci, ngene_id_tbl);
1179
1180/****************************************************************************/
1181/* Init/Exit ****************************************************************/
1182/****************************************************************************/
1183
1184static pci_ers_result_t ngene_error_detected(struct pci_dev *dev,
1185                                             pci_channel_state_t state)
1186{
1187        dev_err(&dev->dev, "PCI error\n");
1188        if (state == pci_channel_io_perm_failure)
1189                return PCI_ERS_RESULT_DISCONNECT;
1190        if (state == pci_channel_io_frozen)
1191                return PCI_ERS_RESULT_NEED_RESET;
1192        return PCI_ERS_RESULT_CAN_RECOVER;
1193}
1194
1195static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev)
1196{
1197        dev_info(&dev->dev, "slot reset\n");
1198        return 0;
1199}
1200
1201static void ngene_resume(struct pci_dev *dev)
1202{
1203        dev_info(&dev->dev, "resume\n");
1204}
1205
1206static const struct pci_error_handlers ngene_errors = {
1207        .error_detected = ngene_error_detected,
1208        .slot_reset = ngene_slot_reset,
1209        .resume = ngene_resume,
1210};
1211
1212static struct pci_driver ngene_pci_driver = {
1213        .name        = "ngene",
1214        .id_table    = ngene_id_tbl,
1215        .probe       = ngene_probe,
1216        .remove      = ngene_remove,
1217        .err_handler = &ngene_errors,
1218        .shutdown    = ngene_shutdown,
1219};
1220
1221static __init int module_init_ngene(void)
1222{
1223        /* pr_*() since we don't have a device to use with dev_*() yet */
1224        pr_info("nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n");
1225
1226        return pci_register_driver(&ngene_pci_driver);
1227}
1228
1229static __exit void module_exit_ngene(void)
1230{
1231        pci_unregister_driver(&ngene_pci_driver);
1232}
1233
1234module_init(module_init_ngene);
1235module_exit(module_exit_ngene);
1236
1237MODULE_DESCRIPTION("nGene");
1238MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel");
1239MODULE_LICENSE("GPL");
1240