LXR linux/drivers/media/usb/cx231xx/cx231xx-input.c

   1// SPDX-License-Identifier: GPL-2.0
   2// cx231xx IR glue driver
   3//
   4// Copyright (c) 2010 Mauro Carvalho Chehab <mchehab@kernel.org>
   5//
   6// Polaris (cx231xx) has its support for IR's with a design close to MCE.
   7// however, a few designs are using an external I2C chip for IR, instead
   8// of using the one provided by the chip.
   9// This driver provides support for those extra devices
  10
  11#include "cx231xx.h"
  12#include <linux/slab.h>
  13#include <linux/bitrev.h>
  14
  15#define MODULE_NAME "cx231xx-input"
  16
  17static int get_key_isdbt(struct IR_i2c *ir, enum rc_proto *protocol,
  18                         u32 *pscancode, u8 *toggle)
  19{
  20        int     rc;
  21        u8      cmd, scancode;
  22
  23        dev_dbg(&ir->rc->dev, "%s\n", __func__);
  24
  25                /* poll IR chip */
  26        rc = i2c_master_recv(ir->c, &cmd, 1);
  27        if (rc < 0)
  28                return rc;
  29        if (rc != 1)
  30                return -EIO;
  31
  32        /* it seems that 0xFE indicates that a button is still hold
  33           down, while 0xff indicates that no button is hold
  34           down. 0xfe sequences are sometimes interrupted by 0xFF */
  35
  36        if (cmd == 0xff)
  37                return 0;
  38
  39        scancode = bitrev8(cmd);
  40
  41        dev_dbg(&ir->rc->dev, "cmd %02x, scan = %02x\n", cmd, scancode);
  42
  43        *protocol = RC_PROTO_OTHER;
  44        *pscancode = scancode;
  45        *toggle = 0;
  46        return 1;
  47}
  48
  49int cx231xx_ir_init(struct cx231xx *dev)
  50{
  51        struct i2c_board_info info;
  52        u8 ir_i2c_bus;
  53
  54        dev_dbg(dev->dev, "%s\n", __func__);
  55
  56        /* Only initialize if a rc keycode map is defined */
  57        if (!cx231xx_boards[dev->model].rc_map_name)
  58                return -ENODEV;
  59
  60        request_module("ir-kbd-i2c");
  61
  62        memset(&info, 0, sizeof(struct i2c_board_info));
  63        memset(&dev->init_data, 0, sizeof(dev->init_data));
  64        dev->init_data.rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
  65        if (!dev->init_data.rc_dev)
  66                return -ENOMEM;
  67
  68        dev->init_data.name = cx231xx_boards[dev->model].name;
  69
  70        strscpy(info.type, "ir_video", I2C_NAME_SIZE);
  71        info.platform_data = &dev->init_data;
  72
  73        /*
  74         * Board-dependent values
  75         *
  76         * For now, there's just one type of hardware design using
  77         * an i2c device.
  78         */
  79        dev->init_data.get_key = get_key_isdbt;
  80        dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
  81        /* The i2c micro-controller only outputs the cmd part of NEC protocol */
  82        dev->init_data.rc_dev->scancode_mask = 0xff;
  83        dev->init_data.rc_dev->driver_name = "cx231xx";
  84        dev->init_data.type = RC_PROTO_BIT_NEC;
  85        info.addr = 0x30;
  86
  87        /* Load and bind ir-kbd-i2c */
  88        ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
  89        dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
  90                ir_i2c_bus, info.addr);
  91        dev->ir_i2c_client = i2c_new_client_device(
  92                cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info);
  93
  94        return 0;
  95}
  96
  97void cx231xx_ir_exit(struct cx231xx *dev)
  98{
  99        i2c_unregister_device(dev->ir_i2c_client);
 100        dev->ir_i2c_client = NULL;
 101}
 102