linux/drivers/misc/bcm-vk/bcm_vk_dev.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Copyright 2018-2020 Broadcom.
   4 */
   5
   6#include <linux/delay.h>
   7#include <linux/dma-mapping.h>
   8#include <linux/firmware.h>
   9#include <linux/fs.h>
  10#include <linux/idr.h>
  11#include <linux/interrupt.h>
  12#include <linux/panic_notifier.h>
  13#include <linux/kref.h>
  14#include <linux/module.h>
  15#include <linux/mutex.h>
  16#include <linux/pci.h>
  17#include <linux/pci_regs.h>
  18#include <uapi/linux/misc/bcm_vk.h>
  19
  20#include "bcm_vk.h"
  21
  22#define PCI_DEVICE_ID_VALKYRIE  0x5e87
  23#define PCI_DEVICE_ID_VIPER     0x5e88
  24
  25static DEFINE_IDA(bcm_vk_ida);
  26
  27enum soc_idx {
  28        VALKYRIE_A0 = 0,
  29        VALKYRIE_B0,
  30        VIPER,
  31        VK_IDX_INVALID
  32};
  33
  34enum img_idx {
  35        IMG_PRI = 0,
  36        IMG_SEC,
  37        IMG_PER_TYPE_MAX
  38};
  39
  40struct load_image_entry {
  41        const u32 image_type;
  42        const char *image_name[IMG_PER_TYPE_MAX];
  43};
  44
  45#define NUM_BOOT_STAGES 2
  46/* default firmware images names */
  47static const struct load_image_entry image_tab[][NUM_BOOT_STAGES] = {
  48        [VALKYRIE_A0] = {
  49                {VK_IMAGE_TYPE_BOOT1, {"vk_a0-boot1.bin", "vk-boot1.bin"}},
  50                {VK_IMAGE_TYPE_BOOT2, {"vk_a0-boot2.bin", "vk-boot2.bin"}}
  51        },
  52        [VALKYRIE_B0] = {
  53                {VK_IMAGE_TYPE_BOOT1, {"vk_b0-boot1.bin", "vk-boot1.bin"}},
  54                {VK_IMAGE_TYPE_BOOT2, {"vk_b0-boot2.bin", "vk-boot2.bin"}}
  55        },
  56
  57        [VIPER] = {
  58                {VK_IMAGE_TYPE_BOOT1, {"vp-boot1.bin", ""}},
  59                {VK_IMAGE_TYPE_BOOT2, {"vp-boot2.bin", ""}}
  60        },
  61};
  62
  63/* Location of memory base addresses of interest in BAR1 */
  64/* Load Boot1 to start of ITCM */
  65#define BAR1_CODEPUSH_BASE_BOOT1        0x100000
  66
  67/* Allow minimum 1s for Load Image timeout responses */
  68#define LOAD_IMAGE_TIMEOUT_MS           (1 * MSEC_PER_SEC)
  69
  70/* Image startup timeouts */
  71#define BOOT1_STARTUP_TIMEOUT_MS        (5 * MSEC_PER_SEC)
  72#define BOOT2_STARTUP_TIMEOUT_MS        (10 * MSEC_PER_SEC)
  73
  74/* 1ms wait for checking the transfer complete status */
  75#define TXFR_COMPLETE_TIMEOUT_MS        1
  76
  77/* MSIX usages */
  78#define VK_MSIX_MSGQ_MAX                3
  79#define VK_MSIX_NOTF_MAX                1
  80#define VK_MSIX_TTY_MAX                 BCM_VK_NUM_TTY
  81#define VK_MSIX_IRQ_MAX                 (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX + \
  82                                         VK_MSIX_TTY_MAX)
  83#define VK_MSIX_IRQ_MIN_REQ             (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX)
  84
  85/* Number of bits set in DMA mask*/
  86#define BCM_VK_DMA_BITS                 64
  87
  88/* Ucode boot wait time */
  89#define BCM_VK_UCODE_BOOT_US            (100 * USEC_PER_MSEC)
  90/* 50% margin */
  91#define BCM_VK_UCODE_BOOT_MAX_US        ((BCM_VK_UCODE_BOOT_US * 3) >> 1)
  92
  93/* deinit time for the card os after receiving doorbell */
  94#define BCM_VK_DEINIT_TIME_MS           (2 * MSEC_PER_SEC)
  95
  96/*
  97 * module parameters
  98 */
  99static bool auto_load = true;
 100module_param(auto_load, bool, 0444);
 101MODULE_PARM_DESC(auto_load,
 102                 "Load images automatically at PCIe probe time.\n");
 103static uint nr_scratch_pages = VK_BAR1_SCRATCH_DEF_NR_PAGES;
 104module_param(nr_scratch_pages, uint, 0444);
 105MODULE_PARM_DESC(nr_scratch_pages,
 106                 "Number of pre allocated DMAable coherent pages.\n");
 107static uint nr_ib_sgl_blk = BCM_VK_DEF_IB_SGL_BLK_LEN;
 108module_param(nr_ib_sgl_blk, uint, 0444);
 109MODULE_PARM_DESC(nr_ib_sgl_blk,
 110                 "Number of in-band msg blks for short SGL.\n");
 111
 112/*
 113 * alerts that could be generated from peer
 114 */
 115const struct bcm_vk_entry bcm_vk_peer_err[BCM_VK_PEER_ERR_NUM] = {
 116        {ERR_LOG_UECC, ERR_LOG_UECC, "uecc"},
 117        {ERR_LOG_SSIM_BUSY, ERR_LOG_SSIM_BUSY, "ssim_busy"},
 118        {ERR_LOG_AFBC_BUSY, ERR_LOG_AFBC_BUSY, "afbc_busy"},
 119        {ERR_LOG_HIGH_TEMP_ERR, ERR_LOG_HIGH_TEMP_ERR, "high_temp"},
 120        {ERR_LOG_WDOG_TIMEOUT, ERR_LOG_WDOG_TIMEOUT, "wdog_timeout"},
 121        {ERR_LOG_SYS_FAULT, ERR_LOG_SYS_FAULT, "sys_fault"},
 122        {ERR_LOG_RAMDUMP, ERR_LOG_RAMDUMP, "ramdump"},
 123        {ERR_LOG_COP_WDOG_TIMEOUT, ERR_LOG_COP_WDOG_TIMEOUT,
 124         "cop_wdog_timeout"},
 125        {ERR_LOG_MEM_ALLOC_FAIL, ERR_LOG_MEM_ALLOC_FAIL, "malloc_fail warn"},
 126        {ERR_LOG_LOW_TEMP_WARN, ERR_LOG_LOW_TEMP_WARN, "low_temp warn"},
 127        {ERR_LOG_ECC, ERR_LOG_ECC, "ecc"},
 128        {ERR_LOG_IPC_DWN, ERR_LOG_IPC_DWN, "ipc_down"},
 129};
 130
 131/* alerts detected by the host */
 132const struct bcm_vk_entry bcm_vk_host_err[BCM_VK_HOST_ERR_NUM] = {
 133        {ERR_LOG_HOST_PCIE_DWN, ERR_LOG_HOST_PCIE_DWN, "PCIe_down"},
 134        {ERR_LOG_HOST_HB_FAIL, ERR_LOG_HOST_HB_FAIL, "hb_fail"},
 135        {ERR_LOG_HOST_INTF_V_FAIL, ERR_LOG_HOST_INTF_V_FAIL, "intf_ver_fail"},
 136};
 137
 138irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id)
 139{
 140        struct bcm_vk *vk = dev_id;
 141
 142        if (!bcm_vk_drv_access_ok(vk)) {
 143                dev_err(&vk->pdev->dev,
 144                        "Interrupt %d received when msgq not inited\n", irq);
 145                goto skip_schedule_work;
 146        }
 147
 148        /* if notification is not pending, set bit and schedule work */
 149        if (test_and_set_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload) == 0)
 150                queue_work(vk->wq_thread, &vk->wq_work);
 151
 152skip_schedule_work:
 153        return IRQ_HANDLED;
 154}
 155
 156static int bcm_vk_intf_ver_chk(struct bcm_vk *vk)
 157{
 158        struct device *dev = &vk->pdev->dev;
 159        u32 reg;
 160        u16 major, minor;
 161        int ret = 0;
 162
 163        /* read interface register */
 164        reg = vkread32(vk, BAR_0, BAR_INTF_VER);
 165        major = (reg >> BAR_INTF_VER_MAJOR_SHIFT) & BAR_INTF_VER_MASK;
 166        minor = reg & BAR_INTF_VER_MASK;
 167
 168        /*
 169         * if major number is 0, it is pre-release and it would be allowed
 170         * to continue, else, check versions accordingly
 171         */
 172        if (!major) {
 173                dev_warn(dev, "Pre-release major.minor=%d.%d - drv %d.%d\n",
 174                         major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
 175        } else if (major != SEMANTIC_MAJOR) {
 176                dev_err(dev,
 177                        "Intf major.minor=%d.%d rejected - drv %d.%d\n",
 178                        major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
 179                bcm_vk_set_host_alert(vk, ERR_LOG_HOST_INTF_V_FAIL);
 180                ret = -EPFNOSUPPORT;
 181        } else {
 182                dev_dbg(dev,
 183                        "Intf major.minor=%d.%d passed - drv %d.%d\n",
 184                        major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
 185        }
 186        return ret;
 187}
 188
 189static void bcm_vk_log_notf(struct bcm_vk *vk,
 190                            struct bcm_vk_alert *alert,
 191                            struct bcm_vk_entry const *entry_tab,
 192                            const u32 table_size)
 193{
 194        u32 i;
 195        u32 masked_val, latched_val;
 196        struct bcm_vk_entry const *entry;
 197        u32 reg;
 198        u16 ecc_mem_err, uecc_mem_err;
 199        struct device *dev = &vk->pdev->dev;
 200
 201        for (i = 0; i < table_size; i++) {
 202                entry = &entry_tab[i];
 203                masked_val = entry->mask & alert->notfs;
 204                latched_val = entry->mask & alert->flags;
 205
 206                if (masked_val == ERR_LOG_UECC) {
 207                        /*
 208                         * if there is difference between stored cnt and it
 209                         * is greater than threshold, log it.
 210                         */
 211                        reg = vkread32(vk, BAR_0, BAR_CARD_ERR_MEM);
 212                        BCM_VK_EXTRACT_FIELD(uecc_mem_err, reg,
 213                                             BCM_VK_MEM_ERR_FIELD_MASK,
 214                                             BCM_VK_UECC_MEM_ERR_SHIFT);
 215                        if ((uecc_mem_err != vk->alert_cnts.uecc) &&
 216                            (uecc_mem_err >= BCM_VK_UECC_THRESHOLD))
 217                                dev_info(dev,
 218                                         "ALERT! %s.%d uecc RAISED - ErrCnt %d\n",
 219                                         DRV_MODULE_NAME, vk->devid,
 220                                         uecc_mem_err);
 221                        vk->alert_cnts.uecc = uecc_mem_err;
 222                } else if (masked_val == ERR_LOG_ECC) {
 223                        reg = vkread32(vk, BAR_0, BAR_CARD_ERR_MEM);
 224                        BCM_VK_EXTRACT_FIELD(ecc_mem_err, reg,
 225                                             BCM_VK_MEM_ERR_FIELD_MASK,
 226                                             BCM_VK_ECC_MEM_ERR_SHIFT);
 227                        if ((ecc_mem_err != vk->alert_cnts.ecc) &&
 228                            (ecc_mem_err >= BCM_VK_ECC_THRESHOLD))
 229                                dev_info(dev, "ALERT! %s.%d ecc RAISED - ErrCnt %d\n",
 230                                         DRV_MODULE_NAME, vk->devid,
 231                                         ecc_mem_err);
 232                        vk->alert_cnts.ecc = ecc_mem_err;
 233                } else if (masked_val != latched_val) {
 234                        /* print a log as info */
 235                        dev_info(dev, "ALERT! %s.%d %s %s\n",
 236                                 DRV_MODULE_NAME, vk->devid, entry->str,
 237                                 masked_val ? "RAISED" : "CLEARED");
 238                }
 239        }
 240}
 241
 242static void bcm_vk_dump_peer_log(struct bcm_vk *vk)
 243{
 244        struct bcm_vk_peer_log log;
 245        struct bcm_vk_peer_log *log_info = &vk->peerlog_info;
 246        char loc_buf[BCM_VK_PEER_LOG_LINE_MAX];
 247        int cnt;
 248        struct device *dev = &vk->pdev->dev;
 249        unsigned int data_offset;
 250
 251        memcpy_fromio(&log, vk->bar[BAR_2] + vk->peerlog_off, sizeof(log));
 252
 253        dev_dbg(dev, "Peer PANIC: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
 254                log.buf_size, log.mask, log.rd_idx, log.wr_idx);
 255
 256        if (!log_info->buf_size) {
 257                dev_err(dev, "Peer log dump disabled - skipped!\n");
 258                return;
 259        }
 260
 261        /* perform range checking for rd/wr idx */
 262        if ((log.rd_idx > log_info->mask) ||
 263            (log.wr_idx > log_info->mask) ||
 264            (log.buf_size != log_info->buf_size) ||
 265            (log.mask != log_info->mask)) {
 266                dev_err(dev,
 267                        "Corrupted Ptrs: Size 0x%x(0x%x) Mask 0x%x(0x%x) [Rd Wr] = [%d %d], skip log dump.\n",
 268                        log_info->buf_size, log.buf_size,
 269                        log_info->mask, log.mask,
 270                        log.rd_idx, log.wr_idx);
 271                return;
 272        }
 273
 274        cnt = 0;
 275        data_offset = vk->peerlog_off + sizeof(struct bcm_vk_peer_log);
 276        loc_buf[BCM_VK_PEER_LOG_LINE_MAX - 1] = '\0';
 277        while (log.rd_idx != log.wr_idx) {
 278                loc_buf[cnt] = vkread8(vk, BAR_2, data_offset + log.rd_idx);
 279
 280                if ((loc_buf[cnt] == '\0') ||
 281                    (cnt == (BCM_VK_PEER_LOG_LINE_MAX - 1))) {
 282                        dev_err(dev, "%s", loc_buf);
 283                        cnt = 0;
 284                } else {
 285                        cnt++;
 286                }
 287                log.rd_idx = (log.rd_idx + 1) & log.mask;
 288        }
 289        /* update rd idx at the end */
 290        vkwrite32(vk, log.rd_idx, BAR_2,
 291                  vk->peerlog_off + offsetof(struct bcm_vk_peer_log, rd_idx));
 292}
 293
 294void bcm_vk_handle_notf(struct bcm_vk *vk)
 295{
 296        u32 reg;
 297        struct bcm_vk_alert alert;
 298        bool intf_down;
 299        unsigned long flags;
 300
 301        /* handle peer alerts and then locally detected ones */
 302        reg = vkread32(vk, BAR_0, BAR_CARD_ERR_LOG);
 303        intf_down = BCM_VK_INTF_IS_DOWN(reg);
 304        if (!intf_down) {
 305                vk->peer_alert.notfs = reg;
 306                bcm_vk_log_notf(vk, &vk->peer_alert, bcm_vk_peer_err,
 307                                ARRAY_SIZE(bcm_vk_peer_err));
 308                vk->peer_alert.flags = vk->peer_alert.notfs;
 309        } else {
 310                /* turn off access */
 311                bcm_vk_blk_drv_access(vk);
 312        }
 313
 314        /* check and make copy of alert with lock and then free lock */
 315        spin_lock_irqsave(&vk->host_alert_lock, flags);
 316        if (intf_down)
 317                vk->host_alert.notfs |= ERR_LOG_HOST_PCIE_DWN;
 318
 319        alert = vk->host_alert;
 320        vk->host_alert.flags = vk->host_alert.notfs;
 321        spin_unlock_irqrestore(&vk->host_alert_lock, flags);
 322
 323        /* call display with copy */
 324        bcm_vk_log_notf(vk, &alert, bcm_vk_host_err,
 325                        ARRAY_SIZE(bcm_vk_host_err));
 326
 327        /*
 328         * If it is a sys fault or heartbeat timeout, we would like extract
 329         * log msg from the card so that we would know what is the last fault
 330         */
 331        if (!intf_down &&
 332            ((vk->host_alert.flags & ERR_LOG_HOST_HB_FAIL) ||
 333             (vk->peer_alert.flags & ERR_LOG_SYS_FAULT)))
 334                bcm_vk_dump_peer_log(vk);
 335}
 336
 337static inline int bcm_vk_wait(struct bcm_vk *vk, enum pci_barno bar,
 338                              u64 offset, u32 mask, u32 value,
 339                              unsigned long timeout_ms)
 340{
 341        struct device *dev = &vk->pdev->dev;
 342        unsigned long start_time;
 343        unsigned long timeout;
 344        u32 rd_val, boot_status;
 345
 346        start_time = jiffies;
 347        timeout = start_time + msecs_to_jiffies(timeout_ms);
 348
 349        do {
 350                rd_val = vkread32(vk, bar, offset);
 351                dev_dbg(dev, "BAR%d Offset=0x%llx: 0x%x\n",
 352                        bar, offset, rd_val);
 353
 354                /* check for any boot err condition */
 355                boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
 356                if (boot_status & BOOT_ERR_MASK) {
 357                        dev_err(dev, "Boot Err 0x%x, progress 0x%x after %d ms\n",
 358                                (boot_status & BOOT_ERR_MASK) >> BOOT_ERR_SHIFT,
 359                                boot_status & BOOT_PROG_MASK,
 360                                jiffies_to_msecs(jiffies - start_time));
 361                        return -EFAULT;
 362                }
 363
 364                if (time_after(jiffies, timeout))
 365                        return -ETIMEDOUT;
 366
 367                cpu_relax();
 368                cond_resched();
 369        } while ((rd_val & mask) != value);
 370
 371        return 0;
 372}
 373
 374static void bcm_vk_get_card_info(struct bcm_vk *vk)
 375{
 376        struct device *dev = &vk->pdev->dev;
 377        u32 offset;
 378        int i;
 379        u8 *dst;
 380        struct bcm_vk_card_info *info = &vk->card_info;
 381
 382        /* first read the offset from spare register */
 383        offset = vkread32(vk, BAR_0, BAR_CARD_STATIC_INFO);
 384        offset &= (pci_resource_len(vk->pdev, BAR_2 * 2) - 1);
 385
 386        /* based on the offset, read info to internal card info structure */
 387        dst = (u8 *)info;
 388        for (i = 0; i < sizeof(*info); i++)
 389                *dst++ = vkread8(vk, BAR_2, offset++);
 390
 391#define CARD_INFO_LOG_FMT "version   : %x\n" \
 392                          "os_tag    : %s\n" \
 393                          "cmpt_tag  : %s\n" \
 394                          "cpu_freq  : %d MHz\n" \
 395                          "cpu_scale : %d full, %d lowest\n" \
 396                          "ddr_freq  : %d MHz\n" \
 397                          "ddr_size  : %d MB\n" \
 398                          "video_freq: %d MHz\n"
 399        dev_dbg(dev, CARD_INFO_LOG_FMT, info->version, info->os_tag,
 400                info->cmpt_tag, info->cpu_freq_mhz, info->cpu_scale[0],
 401                info->cpu_scale[MAX_OPP - 1], info->ddr_freq_mhz,
 402                info->ddr_size_MB, info->video_core_freq_mhz);
 403
 404        /*
 405         * get the peer log pointer, only need the offset, and get record
 406         * of the log buffer information which would be used for checking
 407         * before dump, in case the BAR2 memory has been corrupted.
 408         */
 409        vk->peerlog_off = offset;
 410        memcpy_fromio(&vk->peerlog_info, vk->bar[BAR_2] + vk->peerlog_off,
 411                      sizeof(vk->peerlog_info));
 412
 413        /*
 414         * Do a range checking and if out of bound, the record will be zeroed
 415         * which guarantees that nothing would be dumped.  In other words,
 416         * peer dump is disabled.
 417         */
 418        if ((vk->peerlog_info.buf_size > BCM_VK_PEER_LOG_BUF_MAX) ||
 419            (vk->peerlog_info.mask != (vk->peerlog_info.buf_size - 1)) ||
 420            (vk->peerlog_info.rd_idx > vk->peerlog_info.mask) ||
 421            (vk->peerlog_info.wr_idx > vk->peerlog_info.mask)) {
 422                dev_err(dev, "Peer log disabled - range error: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
 423                        vk->peerlog_info.buf_size,
 424                        vk->peerlog_info.mask,
 425                        vk->peerlog_info.rd_idx,
 426                        vk->peerlog_info.wr_idx);
 427                memset(&vk->peerlog_info, 0, sizeof(vk->peerlog_info));
 428        } else {
 429                dev_dbg(dev, "Peer log: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
 430                        vk->peerlog_info.buf_size,
 431                        vk->peerlog_info.mask,
 432                        vk->peerlog_info.rd_idx,
 433                        vk->peerlog_info.wr_idx);
 434        }
 435}
 436
 437static void bcm_vk_get_proc_mon_info(struct bcm_vk *vk)
 438{
 439        struct device *dev = &vk->pdev->dev;
 440        struct bcm_vk_proc_mon_info *mon = &vk->proc_mon_info;
 441        u32 num, entry_size, offset, buf_size;
 442        u8 *dst;
 443
 444        /* calculate offset which is based on peerlog offset */
 445        buf_size = vkread32(vk, BAR_2,
 446                            vk->peerlog_off
 447                            + offsetof(struct bcm_vk_peer_log, buf_size));
 448        offset = vk->peerlog_off + sizeof(struct bcm_vk_peer_log)
 449                 + buf_size;
 450
 451        /* first read the num and entry size */
 452        num = vkread32(vk, BAR_2, offset);
 453        entry_size = vkread32(vk, BAR_2, offset + sizeof(num));
 454
 455        /* check for max allowed */
 456        if (num > BCM_VK_PROC_MON_MAX) {
 457                dev_err(dev, "Processing monitoring entry %d exceeds max %d\n",
 458                        num, BCM_VK_PROC_MON_MAX);
 459                return;
 460        }
 461        mon->num = num;
 462        mon->entry_size = entry_size;
 463
 464        vk->proc_mon_off = offset;
 465
 466        /* read it once that will capture those static info */
 467        dst = (u8 *)&mon->entries[0];
 468        offset += sizeof(num) + sizeof(entry_size);
 469        memcpy_fromio(dst, vk->bar[BAR_2] + offset, num * entry_size);
 470}
 471
 472static int bcm_vk_sync_card_info(struct bcm_vk *vk)
 473{
 474        u32 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
 475
 476        /* check for marker, but allow diags mode to skip sync */
 477        if (!bcm_vk_msgq_marker_valid(vk))
 478                return (rdy_marker == VK_BAR1_DIAG_RDY_MARKER ? 0 : -EINVAL);
 479
 480        /*
 481         * Write down scratch addr which is used for DMA. For
 482         * signed part, BAR1 is accessible only after boot2 has come
 483         * up
 484         */
 485        if (vk->tdma_addr) {
 486                vkwrite32(vk, (u64)vk->tdma_addr >> 32, BAR_1,
 487                          VK_BAR1_SCRATCH_OFF_HI);
 488                vkwrite32(vk, (u32)vk->tdma_addr, BAR_1,
 489                          VK_BAR1_SCRATCH_OFF_LO);
 490                vkwrite32(vk, nr_scratch_pages * PAGE_SIZE, BAR_1,
 491                          VK_BAR1_SCRATCH_SZ_ADDR);
 492        }
 493
 494        /* get static card info, only need to read once */
 495        bcm_vk_get_card_info(vk);
 496
 497        /* get the proc mon info once */
 498        bcm_vk_get_proc_mon_info(vk);
 499
 500        return 0;
 501}
 502
 503void bcm_vk_blk_drv_access(struct bcm_vk *vk)
 504{
 505        int i;
 506
 507        /*
 508         * kill all the apps except for the process that is resetting.
 509         * If not called during reset, reset_pid will be 0, and all will be
 510         * killed.
 511         */
 512        spin_lock(&vk->ctx_lock);
 513
 514        /* set msgq_inited to 0 so that all rd/wr will be blocked */
 515        atomic_set(&vk->msgq_inited, 0);
 516
 517        for (i = 0; i < VK_PID_HT_SZ; i++) {
 518                struct bcm_vk_ctx *ctx;
 519
 520                list_for_each_entry(ctx, &vk->pid_ht[i].head, node) {
 521                        if (ctx->pid != vk->reset_pid) {
 522                                dev_dbg(&vk->pdev->dev,
 523                                        "Send kill signal to pid %d\n",
 524                                        ctx->pid);
 525                                kill_pid(find_vpid(ctx->pid), SIGKILL, 1);
 526                        }
 527                }
 528        }
 529        bcm_vk_tty_terminate_tty_user(vk);
 530        spin_unlock(&vk->ctx_lock);
 531}
 532
 533static void bcm_vk_buf_notify(struct bcm_vk *vk, void *bufp,
 534                              dma_addr_t host_buf_addr, u32 buf_size)
 535{
 536        /* update the dma address to the card */
 537        vkwrite32(vk, (u64)host_buf_addr >> 32, BAR_1,
 538                  VK_BAR1_DMA_BUF_OFF_HI);
 539        vkwrite32(vk, (u32)host_buf_addr, BAR_1,
 540                  VK_BAR1_DMA_BUF_OFF_LO);
 541        vkwrite32(vk, buf_size, BAR_1, VK_BAR1_DMA_BUF_SZ);
 542}
 543
 544static int bcm_vk_load_image_by_type(struct bcm_vk *vk, u32 load_type,
 545                                     const char *filename)
 546{
 547        struct device *dev = &vk->pdev->dev;
 548        const struct firmware *fw = NULL;
 549        void *bufp = NULL;
 550        size_t max_buf, offset;
 551        int ret;
 552        u64 offset_codepush;
 553        u32 codepush;
 554        u32 value;
 555        dma_addr_t boot_dma_addr;
 556        bool is_stdalone;
 557
 558        if (load_type == VK_IMAGE_TYPE_BOOT1) {
 559                /*
 560                 * After POR, enable VK soft BOOTSRC so bootrom do not clear
 561                 * the pushed image (the TCM memories).
 562                 */
 563                value = vkread32(vk, BAR_0, BAR_BOOTSRC_SELECT);
 564                value |= BOOTSRC_SOFT_ENABLE;
 565                vkwrite32(vk, value, BAR_0, BAR_BOOTSRC_SELECT);
 566
 567                codepush = CODEPUSH_BOOTSTART + CODEPUSH_BOOT1_ENTRY;
 568                offset_codepush = BAR_CODEPUSH_SBL;
 569
 570                /* Write a 1 to request SRAM open bit */
 571                vkwrite32(vk, CODEPUSH_BOOTSTART, BAR_0, offset_codepush);
 572
 573                /* Wait for VK to respond */
 574                ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, SRAM_OPEN,
 575                                  SRAM_OPEN, LOAD_IMAGE_TIMEOUT_MS);
 576                if (ret < 0) {
 577                        dev_err(dev, "boot1 wait SRAM err - ret(%d)\n", ret);
 578                        goto err_buf_out;
 579                }
 580
 581                max_buf = SZ_256K;
 582                bufp = dma_alloc_coherent(dev,
 583                                          max_buf,
 584                                          &boot_dma_addr, GFP_KERNEL);
 585                if (!bufp) {
 586                        dev_err(dev, "Error allocating 0x%zx\n", max_buf);
 587                        ret = -ENOMEM;
 588                        goto err_buf_out;
 589                }
 590        } else if (load_type == VK_IMAGE_TYPE_BOOT2) {
 591                codepush = CODEPUSH_BOOT2_ENTRY;
 592                offset_codepush = BAR_CODEPUSH_SBI;
 593
 594                /* Wait for VK to respond */
 595                ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, DDR_OPEN,
 596                                  DDR_OPEN, LOAD_IMAGE_TIMEOUT_MS);
 597                if (ret < 0) {
 598                        dev_err(dev, "boot2 wait DDR open error - ret(%d)\n",
 599                                ret);
 600                        goto err_buf_out;
 601                }
 602
 603                max_buf = SZ_4M;
 604                bufp = dma_alloc_coherent(dev,
 605                                          max_buf,
 606                                          &boot_dma_addr, GFP_KERNEL);
 607                if (!bufp) {
 608                        dev_err(dev, "Error allocating 0x%zx\n", max_buf);
 609                        ret = -ENOMEM;
 610                        goto err_buf_out;
 611                }
 612
 613                bcm_vk_buf_notify(vk, bufp, boot_dma_addr, max_buf);
 614        } else {
 615                dev_err(dev, "Error invalid image type 0x%x\n", load_type);
 616                ret = -EINVAL;
 617                goto err_buf_out;
 618        }
 619
 620        offset = 0;
 621        ret = request_partial_firmware_into_buf(&fw, filename, dev,
 622                                                bufp, max_buf, offset);
 623        if (ret) {
 624                dev_err(dev, "Error %d requesting firmware file: %s\n",
 625                        ret, filename);
 626                goto err_firmware_out;
 627        }
 628        dev_dbg(dev, "size=0x%zx\n", fw->size);
 629        if (load_type == VK_IMAGE_TYPE_BOOT1)
 630                memcpy_toio(vk->bar[BAR_1] + BAR1_CODEPUSH_BASE_BOOT1,
 631                            bufp,
 632                            fw->size);
 633
 634        dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", codepush, offset_codepush);
 635        vkwrite32(vk, codepush, BAR_0, offset_codepush);
 636
 637        if (load_type == VK_IMAGE_TYPE_BOOT1) {
 638                u32 boot_status;
 639
 640                /* wait until done */
 641                ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
 642                                  BOOT1_RUNNING,
 643                                  BOOT1_RUNNING,
 644                                  BOOT1_STARTUP_TIMEOUT_MS);
 645
 646                boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
 647                is_stdalone = !BCM_VK_INTF_IS_DOWN(boot_status) &&
 648                              (boot_status & BOOT_STDALONE_RUNNING);
 649                if (ret && !is_stdalone) {
 650                        dev_err(dev,
 651                                "Timeout %ld ms waiting for boot1 to come up - ret(%d)\n",
 652                                BOOT1_STARTUP_TIMEOUT_MS, ret);
 653                        goto err_firmware_out;
 654                } else if (is_stdalone) {
 655                        u32 reg;
 656
 657                        reg = vkread32(vk, BAR_0, BAR_BOOT1_STDALONE_PROGRESS);
 658                        if ((reg & BOOT1_STDALONE_PROGRESS_MASK) ==
 659                                     BOOT1_STDALONE_SUCCESS) {
 660                                dev_info(dev, "Boot1 standalone success\n");
 661                                ret = 0;
 662                        } else {
 663                                dev_err(dev, "Timeout %ld ms - Boot1 standalone failure\n",
 664                                        BOOT1_STARTUP_TIMEOUT_MS);
 665                                ret = -EINVAL;
 666                                goto err_firmware_out;
 667                        }
 668                }
 669        } else if (load_type == VK_IMAGE_TYPE_BOOT2) {
 670                unsigned long timeout;
 671
 672                timeout = jiffies + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
 673
 674                /* To send more data to VK than max_buf allowed at a time */
 675                do {
 676                        /*
 677                         * Check for ack from card. when Ack is received,
 678                         * it means all the data is received by card.
 679                         * Exit the loop after ack is received.
 680                         */
 681                        ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
 682                                          FW_LOADER_ACK_RCVD_ALL_DATA,
 683                                          FW_LOADER_ACK_RCVD_ALL_DATA,
 684                                          TXFR_COMPLETE_TIMEOUT_MS);
 685                        if (ret == 0) {
 686                                dev_dbg(dev, "Exit boot2 download\n");
 687                                break;
 688                        } else if (ret == -EFAULT) {
 689                                dev_err(dev, "Error detected during ACK waiting");
 690                                goto err_firmware_out;
 691                        }
 692
 693                        /* exit the loop, if there is no response from card */
 694                        if (time_after(jiffies, timeout)) {
 695                                dev_err(dev, "Error. No reply from card\n");
 696                                ret = -ETIMEDOUT;
 697                                goto err_firmware_out;
 698                        }
 699
 700                        /* Wait for VK to open BAR space to copy new data */
 701                        ret = bcm_vk_wait(vk, BAR_0, offset_codepush,
 702                                          codepush, 0,
 703                                          TXFR_COMPLETE_TIMEOUT_MS);
 704                        if (ret == 0) {
 705                                offset += max_buf;
 706                                ret = request_partial_firmware_into_buf
 707                                                (&fw,
 708                                                 filename,
 709                                                 dev, bufp,
 710                                                 max_buf,
 711                                                 offset);
 712                                if (ret) {
 713                                        dev_err(dev,
 714                                                "Error %d requesting firmware file: %s offset: 0x%zx\n",
 715                                                ret, filename, offset);
 716                                        goto err_firmware_out;
 717                                }
 718                                dev_dbg(dev, "size=0x%zx\n", fw->size);
 719                                dev_dbg(dev, "Signaling 0x%x to 0x%llx\n",
 720                                        codepush, offset_codepush);
 721                                vkwrite32(vk, codepush, BAR_0, offset_codepush);
 722                                /* reload timeout after every codepush */
 723                                timeout = jiffies +
 724                                    msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
 725                        } else if (ret == -EFAULT) {
 726                                dev_err(dev, "Error detected waiting for transfer\n");
 727                                goto err_firmware_out;
 728                        }
 729                } while (1);
 730
 731                /* wait for fw status bits to indicate app ready */
 732                ret = bcm_vk_wait(vk, BAR_0, VK_BAR_FWSTS,
 733                                  VK_FWSTS_READY,
 734                                  VK_FWSTS_READY,
 735                                  BOOT2_STARTUP_TIMEOUT_MS);
 736                if (ret < 0) {
 737                        dev_err(dev, "Boot2 not ready - ret(%d)\n", ret);
 738                        goto err_firmware_out;
 739                }
 740
 741                is_stdalone = vkread32(vk, BAR_0, BAR_BOOT_STATUS) &
 742                              BOOT_STDALONE_RUNNING;
 743                if (!is_stdalone) {
 744                        ret = bcm_vk_intf_ver_chk(vk);
 745                        if (ret) {
 746                                dev_err(dev, "failure in intf version check\n");
 747                                goto err_firmware_out;
 748                        }
 749
 750                        /*
 751                         * Next, initialize Message Q if we are loading boot2.
 752                         * Do a force sync
 753                         */
 754                        ret = bcm_vk_sync_msgq(vk, true);
 755                        if (ret) {
 756                                dev_err(dev, "Boot2 Error reading comm msg Q info\n");
 757                                ret = -EIO;
 758                                goto err_firmware_out;
 759                        }
 760
 761                        /* sync & channel other info */
 762                        ret = bcm_vk_sync_card_info(vk);
 763                        if (ret) {
 764                                dev_err(dev, "Syncing Card Info failure\n");
 765                                goto err_firmware_out;
 766                        }
 767                }
 768        }
 769
 770err_firmware_out:
 771        release_firmware(fw);
 772
 773err_buf_out:
 774        if (bufp)
 775                dma_free_coherent(dev, max_buf, bufp, boot_dma_addr);
 776
 777        return ret;
 778}
 779
 780static u32 bcm_vk_next_boot_image(struct bcm_vk *vk)
 781{
 782        u32 boot_status;
 783        u32 fw_status;
 784        u32 load_type = 0;  /* default for unknown */
 785
 786        boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
 787        fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
 788
 789        if (!BCM_VK_INTF_IS_DOWN(boot_status) && (boot_status & SRAM_OPEN))
 790                load_type = VK_IMAGE_TYPE_BOOT1;
 791        else if (boot_status == BOOT1_RUNNING)
 792                load_type = VK_IMAGE_TYPE_BOOT2;
 793
 794        /* Log status so that we know different stages */
 795        dev_info(&vk->pdev->dev,
 796                 "boot-status value for next image: 0x%x : fw-status 0x%x\n",
 797                 boot_status, fw_status);
 798
 799        return load_type;
 800}
 801
 802static enum soc_idx get_soc_idx(struct bcm_vk *vk)
 803{
 804        struct pci_dev *pdev = vk->pdev;
 805        enum soc_idx idx = VK_IDX_INVALID;
 806        u32 rev;
 807        static enum soc_idx const vk_soc_tab[] = { VALKYRIE_A0, VALKYRIE_B0 };
 808
 809        switch (pdev->device) {
 810        case PCI_DEVICE_ID_VALKYRIE:
 811                /* get the chip id to decide sub-class */
 812                rev = MAJOR_SOC_REV(vkread32(vk, BAR_0, BAR_CHIP_ID));
 813                if (rev < ARRAY_SIZE(vk_soc_tab)) {
 814                        idx = vk_soc_tab[rev];
 815                } else {
 816                        /* Default to A0 firmware for all other chip revs */
 817                        idx = VALKYRIE_A0;
 818                        dev_warn(&pdev->dev,
 819                                 "Rev %d not in image lookup table, default to idx=%d\n",
 820                                 rev, idx);
 821                }
 822                break;
 823
 824        case PCI_DEVICE_ID_VIPER:
 825                idx = VIPER;
 826                break;
 827
 828        default:
 829                dev_err(&pdev->dev, "no images for 0x%x\n", pdev->device);
 830        }
 831        return idx;
 832}
 833
 834static const char *get_load_fw_name(struct bcm_vk *vk,
 835                                    const struct load_image_entry *entry)
 836{
 837        const struct firmware *fw;
 838        struct device *dev = &vk->pdev->dev;
 839        int ret;
 840        unsigned long dummy;
 841        int i;
 842
 843        for (i = 0; i < IMG_PER_TYPE_MAX; i++) {
 844                fw = NULL;
 845                ret = request_partial_firmware_into_buf(&fw,
 846                                                        entry->image_name[i],
 847                                                        dev, &dummy,
 848                                                        sizeof(dummy),
 849                                                        0);
 850                release_firmware(fw);
 851                if (!ret)
 852                        return entry->image_name[i];
 853        }
 854        return NULL;
 855}
 856
 857int bcm_vk_auto_load_all_images(struct bcm_vk *vk)
 858{
 859        int i, ret = -1;
 860        enum soc_idx idx;
 861        struct device *dev = &vk->pdev->dev;
 862        u32 curr_type;
 863        const char *curr_name;
 864
 865        idx = get_soc_idx(vk);
 866        if (idx == VK_IDX_INVALID)
 867                goto auto_load_all_exit;
 868
 869        /* log a message to know the relative loading order */
 870        dev_dbg(dev, "Load All for device %d\n", vk->devid);
 871
 872        for (i = 0; i < NUM_BOOT_STAGES; i++) {
 873                curr_type = image_tab[idx][i].image_type;
 874                if (bcm_vk_next_boot_image(vk) == curr_type) {
 875                        curr_name = get_load_fw_name(vk, &image_tab[idx][i]);
 876                        if (!curr_name) {
 877                                dev_err(dev, "No suitable firmware exists for type %d",
 878                                        curr_type);
 879                                ret = -ENOENT;
 880                                goto auto_load_all_exit;
 881                        }
 882                        ret = bcm_vk_load_image_by_type(vk, curr_type,
 883                                                        curr_name);
 884                        dev_info(dev, "Auto load %s, ret %d\n",
 885                                 curr_name, ret);
 886
 887                        if (ret) {
 888                                dev_err(dev, "Error loading default %s\n",
 889                                        curr_name);
 890                                goto auto_load_all_exit;
 891                        }
 892                }
 893        }
 894
 895auto_load_all_exit:
 896        return ret;
 897}
 898
 899static int bcm_vk_trigger_autoload(struct bcm_vk *vk)
 900{
 901        if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0)
 902                return -EPERM;
 903
 904        set_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
 905        queue_work(vk->wq_thread, &vk->wq_work);
 906
 907        return 0;
 908}
 909
 910/*
 911 * deferred work queue for draining and auto download.
 912 */
 913static void bcm_vk_wq_handler(struct work_struct *work)
 914{
 915        struct bcm_vk *vk = container_of(work, struct bcm_vk, wq_work);
 916        struct device *dev = &vk->pdev->dev;
 917        s32 ret;
 918
 919        /* check wq offload bit map to perform various operations */
 920        if (test_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload)) {
 921                /* clear bit right the way for notification */
 922                clear_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload);
 923                bcm_vk_handle_notf(vk);
 924        }
 925        if (test_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload)) {
 926                bcm_vk_auto_load_all_images(vk);
 927
 928                /*
 929                 * at the end of operation, clear AUTO bit and pending
 930                 * bit
 931                 */
 932                clear_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
 933                clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
 934        }
 935
 936        /* next, try to drain */
 937        ret = bcm_to_h_msg_dequeue(vk);
 938
 939        if (ret == 0)
 940                dev_dbg(dev, "Spurious trigger for workqueue\n");
 941        else if (ret < 0)
 942                bcm_vk_blk_drv_access(vk);
 943}
 944
 945static long bcm_vk_load_image(struct bcm_vk *vk,
 946                              const struct vk_image __user *arg)
 947{
 948        struct device *dev = &vk->pdev->dev;
 949        const char *image_name;
 950        struct vk_image image;
 951        u32 next_loadable;
 952        enum soc_idx idx;
 953        int image_idx;
 954        int ret = -EPERM;
 955
 956        if (copy_from_user(&image, arg, sizeof(image)))
 957                return -EACCES;
 958
 959        if ((image.type != VK_IMAGE_TYPE_BOOT1) &&
 960            (image.type != VK_IMAGE_TYPE_BOOT2)) {
 961                dev_err(dev, "invalid image.type %u\n", image.type);
 962                return ret;
 963        }
 964
 965        next_loadable = bcm_vk_next_boot_image(vk);
 966        if (next_loadable != image.type) {
 967                dev_err(dev, "Next expected image %u, Loading %u\n",
 968                        next_loadable, image.type);
 969                return ret;
 970        }
 971
 972        /*
 973         * if something is pending download already.  This could only happen
 974         * for now when the driver is being loaded, or if someone has issued
 975         * another download command in another shell.
 976         */
 977        if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) {
 978                dev_err(dev, "Download operation already pending.\n");
 979                return ret;
 980        }
 981
 982        image_name = image.filename;
 983        if (image_name[0] == '\0') {
 984                /* Use default image name if NULL */
 985                idx = get_soc_idx(vk);
 986                if (idx == VK_IDX_INVALID)
 987                        goto err_idx;
 988
 989                /* Image idx starts with boot1 */
 990                image_idx = image.type - VK_IMAGE_TYPE_BOOT1;
 991                image_name = get_load_fw_name(vk, &image_tab[idx][image_idx]);
 992                if (!image_name) {
 993                        dev_err(dev, "No suitable image found for type %d",
 994                                image.type);
 995                        ret = -ENOENT;
 996                        goto err_idx;
 997                }
 998        } else {
 999                /* Ensure filename is NULL terminated */
1000                image.filename[sizeof(image.filename) - 1] = '\0';
1001        }
1002        ret = bcm_vk_load_image_by_type(vk, image.type, image_name);
1003        dev_info(dev, "Load %s, ret %d\n", image_name, ret);
1004err_idx:
1005        clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
1006
1007        return ret;
1008}
1009
1010static int bcm_vk_reset_successful(struct bcm_vk *vk)
1011{
1012        struct device *dev = &vk->pdev->dev;
1013        u32 fw_status, reset_reason;
1014        int ret = -EAGAIN;
1015
1016        /*
1017         * Reset could be triggered when the card in several state:
1018         *   i)   in bootROM
1019         *   ii)  after boot1
1020         *   iii) boot2 running
1021         *
1022         * i) & ii) - no status bits will be updated.  If vkboot1
1023         * runs automatically after reset, it  will update the reason
1024         * to be unknown reason
1025         * iii) - reboot reason match + deinit done.
1026         */
1027        fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
1028        /* immediate exit if interface goes down */
1029        if (BCM_VK_INTF_IS_DOWN(fw_status)) {
1030                dev_err(dev, "PCIe Intf Down!\n");
1031                goto reset_exit;
1032        }
1033
1034        reset_reason = (fw_status & VK_FWSTS_RESET_REASON_MASK);
1035        if ((reset_reason == VK_FWSTS_RESET_MBOX_DB) ||
1036            (reset_reason == VK_FWSTS_RESET_UNKNOWN))
1037                ret = 0;
1038
1039        /*
1040         * if some of the deinit bits are set, but done
1041         * bit is not, this is a failure if triggered while boot2 is running
1042         */
1043        if ((fw_status & VK_FWSTS_DEINIT_TRIGGERED) &&
1044            !(fw_status & VK_FWSTS_RESET_DONE))
1045                ret = -EAGAIN;
1046
1047reset_exit:
1048        dev_dbg(dev, "FW status = 0x%x ret %d\n", fw_status, ret);
1049
1050        return ret;
1051}
1052
1053static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val)
1054{
1055        vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE);
1056}
1057
1058static int bcm_vk_trigger_reset(struct bcm_vk *vk)
1059{
1060        u32 i;
1061        u32 value, boot_status;
1062        bool is_stdalone, is_boot2;
1063        static const u32 bar0_reg_clr_list[] = { BAR_OS_UPTIME,
1064                                                 BAR_INTF_VER,
1065                                                 BAR_CARD_VOLTAGE,
1066                                                 BAR_CARD_TEMPERATURE,
1067                                                 BAR_CARD_PWR_AND_THRE };
1068
1069        /* clean up before pressing the door bell */
1070        bcm_vk_drain_msg_on_reset(vk);
1071        vkwrite32(vk, 0, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
1072        /* make tag '\0' terminated */
1073        vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG);
1074
1075        for (i = 0; i < VK_BAR1_DAUTH_MAX; i++) {
1076                vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_STORE_ADDR(i));
1077                vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_VALID_ADDR(i));
1078        }
1079        for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++)
1080                vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i));
1081
1082        memset(&vk->card_info, 0, sizeof(vk->card_info));
1083        memset(&vk->peerlog_info, 0, sizeof(vk->peerlog_info));
1084        memset(&vk->proc_mon_info, 0, sizeof(vk->proc_mon_info));
1085        memset(&vk->alert_cnts, 0, sizeof(vk->alert_cnts));
1086
1087        /*
1088         * When boot request fails, the CODE_PUSH_OFFSET stays persistent.
1089         * Allowing us to debug the failure. When we call reset,
1090         * we should clear CODE_PUSH_OFFSET so ROM does not execute
1091         * boot again (and fails again) and instead waits for a new
1092         * codepush.  And, if previous boot has encountered error, need
1093         * to clear the entry values
1094         */
1095        boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
1096        if (boot_status & BOOT_ERR_MASK) {
1097                dev_info(&vk->pdev->dev,
1098                         "Card in boot error 0x%x, clear CODEPUSH val\n",
1099                         boot_status);
1100                value = 0;
1101        } else {
1102                value = vkread32(vk, BAR_0, BAR_CODEPUSH_SBL);
1103                value &= CODEPUSH_MASK;
1104        }
1105        vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL);
1106
1107        /* special reset handling */
1108        is_stdalone = boot_status & BOOT_STDALONE_RUNNING;
1109        is_boot2 = (boot_status & BOOT_STATE_MASK) == BOOT2_RUNNING;
1110        if (vk->peer_alert.flags & ERR_LOG_RAMDUMP) {
1111                /*
1112                 * if card is in ramdump mode, it is hitting an error.  Don't
1113                 * reset the reboot reason as it will contain valid info that
1114                 * is important - simply use special reset
1115                 */
1116                vkwrite32(vk, VK_BAR0_RESET_RAMPDUMP, BAR_0, VK_BAR_FWSTS);
1117                return VK_BAR0_RESET_RAMPDUMP;
1118        } else if (is_stdalone && !is_boot2) {
1119                dev_info(&vk->pdev->dev, "Hard reset on Standalone mode");
1120                bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_HARD);
1121                return VK_BAR0_RESET_DB_HARD;
1122        }
1123
1124        /* reset fw_status with proper reason, and press db */
1125        vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS);
1126        bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT);
1127
1128        /* clear other necessary registers and alert records */
1129        for (i = 0; i < ARRAY_SIZE(bar0_reg_clr_list); i++)
1130                vkwrite32(vk, 0, BAR_0, bar0_reg_clr_list[i]);
1131        memset(&vk->host_alert, 0, sizeof(vk->host_alert));
1132        memset(&vk->peer_alert, 0, sizeof(vk->peer_alert));
1133        /* clear 4096 bits of bitmap */
1134        bitmap_clear(vk->bmap, 0, VK_MSG_ID_BITMAP_SIZE);
1135
1136        return 0;
1137}
1138
1139static long bcm_vk_reset(struct bcm_vk *vk, struct vk_reset __user *arg)
1140{
1141        struct device *dev = &vk->pdev->dev;
1142        struct vk_reset reset;
1143        int ret = 0;
1144        u32 ramdump_reset;
1145        int special_reset;
1146
1147        if (copy_from_user(&reset, arg, sizeof(struct vk_reset)))
1148                return -EFAULT;
1149
1150        /* check if any download is in-progress, if so return error */
1151        if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) {
1152                dev_err(dev, "Download operation pending - skip reset.\n");
1153                return -EPERM;
1154        }
1155
1156        ramdump_reset = vk->peer_alert.flags & ERR_LOG_RAMDUMP;
1157        dev_info(dev, "Issue Reset %s\n",
1158                 ramdump_reset ? "in ramdump mode" : "");
1159
1160        /*
1161         * The following is the sequence of reset:
1162         * - send card level graceful shut down
1163         * - wait enough time for VK to handle its business, stopping DMA etc
1164         * - kill host apps
1165         * - Trigger interrupt with DB
1166         */
1167        bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_GRACEFUL, 0, 0);
1168
1169        spin_lock(&vk->ctx_lock);
1170        if (!vk->reset_pid) {
1171                vk->reset_pid = task_pid_nr(current);
1172        } else {
1173                dev_err(dev, "Reset already launched by process pid %d\n",
1174                        vk->reset_pid);
1175                ret = -EACCES;
1176        }
1177        spin_unlock(&vk->ctx_lock);
1178        if (ret)
1179                goto err_exit;
1180
1181        bcm_vk_blk_drv_access(vk);
1182        special_reset = bcm_vk_trigger_reset(vk);
1183
1184        /*
1185         * Wait enough time for card os to deinit
1186         * and populate the reset reason.
1187         */
1188        msleep(BCM_VK_DEINIT_TIME_MS);
1189
1190        if (special_reset) {
1191                /* if it is special ramdump reset, return the type to user */
1192                reset.arg2 = special_reset;
1193                if (copy_to_user(arg, &reset, sizeof(reset)))
1194                        ret = -EFAULT;
1195        } else {
1196                ret = bcm_vk_reset_successful(vk);
1197        }
1198
1199err_exit:
1200        clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
1201        return ret;
1202}
1203
1204static int bcm_vk_mmap(struct file *file, struct vm_area_struct *vma)
1205{
1206        struct bcm_vk_ctx *ctx = file->private_data;
1207        struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev);
1208        unsigned long pg_size;
1209
1210        /* only BAR2 is mmap possible, which is bar num 4 due to 64bit */
1211#define VK_MMAPABLE_BAR 4
1212
1213        pg_size = ((pci_resource_len(vk->pdev, VK_MMAPABLE_BAR) - 1)
1214                    >> PAGE_SHIFT) + 1;
1215        if (vma->vm_pgoff + vma_pages(vma) > pg_size)
1216                return -EINVAL;
1217
1218        vma->vm_pgoff += (pci_resource_start(vk->pdev, VK_MMAPABLE_BAR)
1219                          >> PAGE_SHIFT);
1220        vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
1221
1222        return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
1223                                  vma->vm_end - vma->vm_start,
1224                                  vma->vm_page_prot);
1225}
1226
1227static long bcm_vk_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
1228{
1229        long ret = -EINVAL;
1230        struct bcm_vk_ctx *ctx = file->private_data;
1231        struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev);
1232        void __user *argp = (void __user *)arg;
1233
1234        dev_dbg(&vk->pdev->dev,
1235                "ioctl, cmd=0x%02x, arg=0x%02lx\n",
1236                cmd, arg);
1237
1238        mutex_lock(&vk->mutex);
1239
1240        switch (cmd) {
1241        case VK_IOCTL_LOAD_IMAGE:
1242                ret = bcm_vk_load_image(vk, argp);
1243                break;
1244
1245        case VK_IOCTL_RESET:
1246                ret = bcm_vk_reset(vk, argp);
1247                break;
1248
1249        default:
1250                break;
1251        }
1252
1253        mutex_unlock(&vk->mutex);
1254
1255        return ret;
1256}
1257
1258static const struct file_operations bcm_vk_fops = {
1259        .owner = THIS_MODULE,
1260        .open = bcm_vk_open,
1261        .read = bcm_vk_read,
1262        .write = bcm_vk_write,
1263        .poll = bcm_vk_poll,
1264        .release = bcm_vk_release,
1265        .mmap = bcm_vk_mmap,
1266        .unlocked_ioctl = bcm_vk_ioctl,
1267};
1268
1269static int bcm_vk_on_panic(struct notifier_block *nb,
1270                           unsigned long e, void *p)
1271{
1272        struct bcm_vk *vk = container_of(nb, struct bcm_vk, panic_nb);
1273
1274        bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_HARD);
1275
1276        return 0;
1277}
1278
1279static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1280{
1281        int err;
1282        int i;
1283        int id;
1284        int irq;
1285        char name[20];
1286        struct bcm_vk *vk;
1287        struct device *dev = &pdev->dev;
1288        struct miscdevice *misc_device;
1289        u32 boot_status;
1290
1291        /* allocate vk structure which is tied to kref for freeing */
1292        vk = kzalloc(sizeof(*vk), GFP_KERNEL);
1293        if (!vk)
1294                return -ENOMEM;
1295
1296        kref_init(&vk->kref);
1297        if (nr_ib_sgl_blk > BCM_VK_IB_SGL_BLK_MAX) {
1298                dev_warn(dev, "Inband SGL blk %d limited to max %d\n",
1299                         nr_ib_sgl_blk, BCM_VK_IB_SGL_BLK_MAX);
1300                nr_ib_sgl_blk = BCM_VK_IB_SGL_BLK_MAX;
1301        }
1302        vk->ib_sgl_size = nr_ib_sgl_blk * VK_MSGQ_BLK_SIZE;
1303        mutex_init(&vk->mutex);
1304
1305        err = pci_enable_device(pdev);
1306        if (err) {
1307                dev_err(dev, "Cannot enable PCI device\n");
1308                goto err_free_exit;
1309        }
1310        vk->pdev = pci_dev_get(pdev);
1311
1312        err = pci_request_regions(pdev, DRV_MODULE_NAME);
1313        if (err) {
1314                dev_err(dev, "Cannot obtain PCI resources\n");
1315                goto err_disable_pdev;
1316        }
1317
1318        /* make sure DMA is good */
1319        err = dma_set_mask_and_coherent(&pdev->dev,
1320                                        DMA_BIT_MASK(BCM_VK_DMA_BITS));
1321        if (err) {
1322                dev_err(dev, "failed to set DMA mask\n");
1323                goto err_disable_pdev;
1324        }
1325
1326        /* The tdma is a scratch area for some DMA testings. */
1327        if (nr_scratch_pages) {
1328                vk->tdma_vaddr = dma_alloc_coherent
1329                                        (dev,
1330                                         nr_scratch_pages * PAGE_SIZE,
1331                                         &vk->tdma_addr, GFP_KERNEL);
1332                if (!vk->tdma_vaddr) {
1333                        err = -ENOMEM;
1334                        goto err_disable_pdev;
1335                }
1336        }
1337
1338        pci_set_master(pdev);
1339        pci_set_drvdata(pdev, vk);
1340
1341        irq = pci_alloc_irq_vectors(pdev,
1342                                    1,
1343                                    VK_MSIX_IRQ_MAX,
1344                                    PCI_IRQ_MSI | PCI_IRQ_MSIX);
1345
1346        if (irq < VK_MSIX_IRQ_MIN_REQ) {
1347                dev_err(dev, "failed to get min %d MSIX interrupts, irq(%d)\n",
1348                        VK_MSIX_IRQ_MIN_REQ, irq);
1349                err = (irq >= 0) ? -EINVAL : irq;
1350                goto err_disable_pdev;
1351        }
1352
1353        if (irq != VK_MSIX_IRQ_MAX)
1354                dev_warn(dev, "Number of IRQs %d allocated - requested(%d).\n",
1355                         irq, VK_MSIX_IRQ_MAX);
1356
1357        for (i = 0; i < MAX_BAR; i++) {
1358                /* multiple by 2 for 64 bit BAR mapping */
1359                vk->bar[i] = pci_ioremap_bar(pdev, i * 2);
1360                if (!vk->bar[i]) {
1361                        dev_err(dev, "failed to remap BAR%d\n", i);
1362                        err = -ENOMEM;
1363                        goto err_iounmap;
1364                }
1365        }
1366
1367        for (vk->num_irqs = 0;
1368             vk->num_irqs < VK_MSIX_MSGQ_MAX;
1369             vk->num_irqs++) {
1370                err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
1371                                       bcm_vk_msgq_irqhandler,
1372                                       IRQF_SHARED, DRV_MODULE_NAME, vk);
1373                if (err) {
1374                        dev_err(dev, "failed to request msgq IRQ %d for MSIX %d\n",
1375                                pdev->irq + vk->num_irqs, vk->num_irqs + 1);
1376                        goto err_irq;
1377                }
1378        }
1379        /* one irq for notification from VK */
1380        err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
1381                               bcm_vk_notf_irqhandler,
1382                               IRQF_SHARED, DRV_MODULE_NAME, vk);
1383        if (err) {
1384                dev_err(dev, "failed to request notf IRQ %d for MSIX %d\n",
1385                        pdev->irq + vk->num_irqs, vk->num_irqs + 1);
1386                goto err_irq;
1387        }
1388        vk->num_irqs++;
1389
1390        for (i = 0;
1391             (i < VK_MSIX_TTY_MAX) && (vk->num_irqs < irq);
1392             i++, vk->num_irqs++) {
1393                err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
1394                                       bcm_vk_tty_irqhandler,
1395                                       IRQF_SHARED, DRV_MODULE_NAME, vk);
1396                if (err) {
1397                        dev_err(dev, "failed request tty IRQ %d for MSIX %d\n",
1398                                pdev->irq + vk->num_irqs, vk->num_irqs + 1);
1399                        goto err_irq;
1400                }
1401                bcm_vk_tty_set_irq_enabled(vk, i);
1402        }
1403
1404        id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
1405        if (id < 0) {
1406                err = id;
1407                dev_err(dev, "unable to get id\n");
1408                goto err_irq;
1409        }
1410
1411        vk->devid = id;
1412        snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
1413        misc_device = &vk->miscdev;
1414        misc_device->minor = MISC_DYNAMIC_MINOR;
1415        misc_device->name = kstrdup(name, GFP_KERNEL);
1416        if (!misc_device->name) {
1417                err = -ENOMEM;
1418                goto err_ida_remove;
1419        }
1420        misc_device->fops = &bcm_vk_fops,
1421
1422        err = misc_register(misc_device);
1423        if (err) {
1424                dev_err(dev, "failed to register device\n");
1425                goto err_kfree_name;
1426        }
1427
1428        INIT_WORK(&vk->wq_work, bcm_vk_wq_handler);
1429
1430        /* create dedicated workqueue */
1431        vk->wq_thread = create_singlethread_workqueue(name);
1432        if (!vk->wq_thread) {
1433                dev_err(dev, "Fail to create workqueue thread\n");
1434                err = -ENOMEM;
1435                goto err_misc_deregister;
1436        }
1437
1438        err = bcm_vk_msg_init(vk);
1439        if (err) {
1440                dev_err(dev, "failed to init msg queue info\n");
1441                goto err_destroy_workqueue;
1442        }
1443
1444        /* sync other info */
1445        bcm_vk_sync_card_info(vk);
1446
1447        /* register for panic notifier */
1448        vk->panic_nb.notifier_call = bcm_vk_on_panic;
1449        err = atomic_notifier_chain_register(&panic_notifier_list,
1450                                             &vk->panic_nb);
1451        if (err) {
1452                dev_err(dev, "Fail to register panic notifier\n");
1453                goto err_destroy_workqueue;
1454        }
1455
1456        snprintf(name, sizeof(name), KBUILD_MODNAME ".%d_ttyVK", id);
1457        err = bcm_vk_tty_init(vk, name);
1458        if (err)
1459                goto err_unregister_panic_notifier;
1460
1461        /*
1462         * lets trigger an auto download.  We don't want to do it serially here
1463         * because at probing time, it is not supposed to block for a long time.
1464         */
1465        boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
1466        if (auto_load) {
1467                if ((boot_status & BOOT_STATE_MASK) == BROM_RUNNING) {
1468                        err = bcm_vk_trigger_autoload(vk);
1469                        if (err)
1470                                goto err_bcm_vk_tty_exit;
1471                } else {
1472                        dev_err(dev,
1473                                "Auto-load skipped - BROM not in proper state (0x%x)\n",
1474                                boot_status);
1475                }
1476        }
1477
1478        /* enable hb */
1479        bcm_vk_hb_init(vk);
1480
1481        dev_dbg(dev, "BCM-VK:%u created\n", id);
1482
1483        return 0;
1484
1485err_bcm_vk_tty_exit:
1486        bcm_vk_tty_exit(vk);
1487
1488err_unregister_panic_notifier:
1489        atomic_notifier_chain_unregister(&panic_notifier_list,
1490                                         &vk->panic_nb);
1491
1492err_destroy_workqueue:
1493        destroy_workqueue(vk->wq_thread);
1494
1495err_misc_deregister:
1496        misc_deregister(misc_device);
1497
1498err_kfree_name:
1499        kfree(misc_device->name);
1500        misc_device->name = NULL;
1501
1502err_ida_remove:
1503        ida_simple_remove(&bcm_vk_ida, id);
1504
1505err_irq:
1506        for (i = 0; i < vk->num_irqs; i++)
1507                devm_free_irq(dev, pci_irq_vector(pdev, i), vk);
1508
1509        pci_disable_msix(pdev);
1510        pci_disable_msi(pdev);
1511
1512err_iounmap:
1513        for (i = 0; i < MAX_BAR; i++) {
1514                if (vk->bar[i])
1515                        pci_iounmap(pdev, vk->bar[i]);
1516        }
1517        pci_release_regions(pdev);
1518
1519err_disable_pdev:
1520        if (vk->tdma_vaddr)
1521                dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
1522                                  vk->tdma_vaddr, vk->tdma_addr);
1523
1524        pci_free_irq_vectors(pdev);
1525        pci_disable_device(pdev);
1526        pci_dev_put(pdev);
1527
1528err_free_exit:
1529        kfree(vk);
1530
1531        return err;
1532}
1533
1534void bcm_vk_release_data(struct kref *kref)
1535{
1536        struct bcm_vk *vk = container_of(kref, struct bcm_vk, kref);
1537        struct pci_dev *pdev = vk->pdev;
1538
1539        dev_dbg(&pdev->dev, "BCM-VK:%d release data 0x%p\n", vk->devid, vk);
1540        pci_dev_put(pdev);
1541        kfree(vk);
1542}
1543
1544static void bcm_vk_remove(struct pci_dev *pdev)
1545{
1546        int i;
1547        struct bcm_vk *vk = pci_get_drvdata(pdev);
1548        struct miscdevice *misc_device = &vk->miscdev;
1549
1550        bcm_vk_hb_deinit(vk);
1551
1552        /*
1553         * Trigger a reset to card and wait enough time for UCODE to rerun,
1554         * which re-initialize the card into its default state.
1555         * This ensures when driver is re-enumerated it will start from
1556         * a completely clean state.
1557         */
1558        bcm_vk_trigger_reset(vk);
1559        usleep_range(BCM_VK_UCODE_BOOT_US, BCM_VK_UCODE_BOOT_MAX_US);
1560
1561        /* unregister panic notifier */
1562        atomic_notifier_chain_unregister(&panic_notifier_list,
1563                                         &vk->panic_nb);
1564
1565        bcm_vk_msg_remove(vk);
1566        bcm_vk_tty_exit(vk);
1567
1568        if (vk->tdma_vaddr)
1569                dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
1570                                  vk->tdma_vaddr, vk->tdma_addr);
1571
1572        /* remove if name is set which means misc dev registered */
1573        if (misc_device->name) {
1574                misc_deregister(misc_device);
1575                kfree(misc_device->name);
1576                ida_simple_remove(&bcm_vk_ida, vk->devid);
1577        }
1578        for (i = 0; i < vk->num_irqs; i++)
1579                devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), vk);
1580
1581        pci_disable_msix(pdev);
1582        pci_disable_msi(pdev);
1583
1584        cancel_work_sync(&vk->wq_work);
1585        destroy_workqueue(vk->wq_thread);
1586        bcm_vk_tty_wq_exit(vk);
1587
1588        for (i = 0; i < MAX_BAR; i++) {
1589                if (vk->bar[i])
1590                        pci_iounmap(pdev, vk->bar[i]);
1591        }
1592
1593        dev_dbg(&pdev->dev, "BCM-VK:%d released\n", vk->devid);
1594
1595        pci_release_regions(pdev);
1596        pci_free_irq_vectors(pdev);
1597        pci_disable_device(pdev);
1598
1599        kref_put(&vk->kref, bcm_vk_release_data);
1600}
1601
1602static void bcm_vk_shutdown(struct pci_dev *pdev)
1603{
1604        struct bcm_vk *vk = pci_get_drvdata(pdev);
1605        u32 reg, boot_stat;
1606
1607        reg = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
1608        boot_stat = reg & BOOT_STATE_MASK;
1609
1610        if (boot_stat == BOOT1_RUNNING) {
1611                /* simply trigger a reset interrupt to park it */
1612                bcm_vk_trigger_reset(vk);
1613        } else if (boot_stat == BROM_NOT_RUN) {
1614                int err;
1615                u16 lnksta;
1616
1617                /*
1618                 * The boot status only reflects boot condition since last reset
1619                 * As ucode will run only once to configure pcie, if multiple
1620                 * resets happen, we lost track if ucode has run or not.
1621                 * Here, read the current link speed and use that to
1622                 * sync up the bootstatus properly so that on reboot-back-up,
1623                 * it has the proper state to start with autoload
1624                 */
1625                err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
1626                if (!err &&
1627                    (lnksta & PCI_EXP_LNKSTA_CLS) != PCI_EXP_LNKSTA_CLS_2_5GB) {
1628                        reg |= BROM_STATUS_COMPLETE;
1629                        vkwrite32(vk, reg, BAR_0, BAR_BOOT_STATUS);
1630                }
1631        }
1632}
1633
1634static const struct pci_device_id bcm_vk_ids[] = {
1635        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), },
1636        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), },
1637        { }
1638};
1639MODULE_DEVICE_TABLE(pci, bcm_vk_ids);
1640
1641static struct pci_driver pci_driver = {
1642        .name     = DRV_MODULE_NAME,
1643        .id_table = bcm_vk_ids,
1644        .probe    = bcm_vk_probe,
1645        .remove   = bcm_vk_remove,
1646        .shutdown = bcm_vk_shutdown,
1647};
1648module_pci_driver(pci_driver);
1649
1650MODULE_DESCRIPTION("Broadcom VK Host Driver");
1651MODULE_AUTHOR("Scott Branden <scott.branden@broadcom.com>");
1652MODULE_LICENSE("GPL v2");
1653MODULE_VERSION("1.0");
1654