linux/drivers/net/ethernet/amd/amd8111e.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2
   3/* Advanced  Micro Devices Inc. AMD8111E Linux Network Driver
   4 * Copyright (C) 2004 Advanced Micro Devices
   5 *
   6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
   7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
   8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
   9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
  10 * Copyright 1993 United States Government as represented by the
  11 *      Director, National Security Agency.[ pcnet32.c ]
  12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
  13 * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
  14 *
  15
  16Module Name:
  17
  18        amd8111e.c
  19
  20Abstract:
  21
  22         AMD8111 based 10/100 Ethernet Controller Driver.
  23
  24Environment:
  25
  26        Kernel Mode
  27
  28Revision History:
  29        3.0.0
  30           Initial Revision.
  31        3.0.1
  32         1. Dynamic interrupt coalescing.
  33         2. Removed prev_stats.
  34         3. MII support.
  35         4. Dynamic IPG support
  36        3.0.2  05/29/2003
  37         1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
  38         2. Bug fix: Fixed VLAN support failure.
  39         3. Bug fix: Fixed receive interrupt coalescing bug.
  40         4. Dynamic IPG support is disabled by default.
  41        3.0.3 06/05/2003
  42         1. Bug fix: Fixed failure to close the interface if SMP is enabled.
  43        3.0.4 12/09/2003
  44         1. Added set_mac_address routine for bonding driver support.
  45         2. Tested the driver for bonding support
  46         3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
  47            indicated to the h/w.
  48         4. Modified amd8111e_rx() routine to receive all the received packets
  49            in the first interrupt.
  50         5. Bug fix: Corrected  rx_errors  reported in get_stats() function.
  51        3.0.5 03/22/2004
  52         1. Added NAPI support
  53
  54*/
  55
  56
  57#include <linux/module.h>
  58#include <linux/kernel.h>
  59#include <linux/types.h>
  60#include <linux/compiler.h>
  61#include <linux/delay.h>
  62#include <linux/interrupt.h>
  63#include <linux/ioport.h>
  64#include <linux/pci.h>
  65#include <linux/netdevice.h>
  66#include <linux/etherdevice.h>
  67#include <linux/skbuff.h>
  68#include <linux/ethtool.h>
  69#include <linux/mii.h>
  70#include <linux/if_vlan.h>
  71#include <linux/ctype.h>
  72#include <linux/crc32.h>
  73#include <linux/dma-mapping.h>
  74
  75#include <asm/io.h>
  76#include <asm/byteorder.h>
  77#include <linux/uaccess.h>
  78
  79#if IS_ENABLED(CONFIG_VLAN_8021Q)
  80#define AMD8111E_VLAN_TAG_USED 1
  81#else
  82#define AMD8111E_VLAN_TAG_USED 0
  83#endif
  84
  85#include "amd8111e.h"
  86#define MODULE_NAME     "amd8111e"
  87MODULE_AUTHOR("Advanced Micro Devices, Inc.");
  88MODULE_DESCRIPTION("AMD8111 based 10/100 Ethernet Controller.");
  89MODULE_LICENSE("GPL");
  90module_param_array(speed_duplex, int, NULL, 0);
  91MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
  92module_param_array(coalesce, bool, NULL, 0);
  93MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
  94module_param_array(dynamic_ipg, bool, NULL, 0);
  95MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
  96
  97/* This function will read the PHY registers. */
  98static int amd8111e_read_phy(struct amd8111e_priv *lp,
  99                             int phy_id, int reg, u32 *val)
 100{
 101        void __iomem *mmio = lp->mmio;
 102        unsigned int reg_val;
 103        unsigned int repeat = REPEAT_CNT;
 104
 105        reg_val = readl(mmio + PHY_ACCESS);
 106        while (reg_val & PHY_CMD_ACTIVE)
 107                reg_val = readl(mmio + PHY_ACCESS);
 108
 109        writel(PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
 110                           ((reg & 0x1f) << 16), mmio + PHY_ACCESS);
 111        do {
 112                reg_val = readl(mmio + PHY_ACCESS);
 113                udelay(30);  /* It takes 30 us to read/write data */
 114        } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
 115        if (reg_val & PHY_RD_ERR)
 116                goto err_phy_read;
 117
 118        *val = reg_val & 0xffff;
 119        return 0;
 120err_phy_read:
 121        *val = 0;
 122        return -EINVAL;
 123
 124}
 125
 126/* This function will write into PHY registers. */
 127static int amd8111e_write_phy(struct amd8111e_priv *lp,
 128                              int phy_id, int reg, u32 val)
 129{
 130        unsigned int repeat = REPEAT_CNT;
 131        void __iomem *mmio = lp->mmio;
 132        unsigned int reg_val;
 133
 134        reg_val = readl(mmio + PHY_ACCESS);
 135        while (reg_val & PHY_CMD_ACTIVE)
 136                reg_val = readl(mmio + PHY_ACCESS);
 137
 138        writel(PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
 139                           ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
 140
 141        do {
 142                reg_val = readl(mmio + PHY_ACCESS);
 143                udelay(30);  /* It takes 30 us to read/write the data */
 144        } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
 145
 146        if (reg_val & PHY_RD_ERR)
 147                goto err_phy_write;
 148
 149        return 0;
 150
 151err_phy_write:
 152        return -EINVAL;
 153
 154}
 155
 156/* This is the mii register read function provided to the mii interface. */
 157static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
 158{
 159        struct amd8111e_priv *lp = netdev_priv(dev);
 160        unsigned int reg_val;
 161
 162        amd8111e_read_phy(lp, phy_id, reg_num, &reg_val);
 163        return reg_val;
 164
 165}
 166
 167/* This is the mii register write function provided to the mii interface. */
 168static void amd8111e_mdio_write(struct net_device *dev,
 169                                int phy_id, int reg_num, int val)
 170{
 171        struct amd8111e_priv *lp = netdev_priv(dev);
 172
 173        amd8111e_write_phy(lp, phy_id, reg_num, val);
 174}
 175
 176/* This function will set PHY speed. During initialization sets
 177 * the original speed to 100 full
 178 */
 179static void amd8111e_set_ext_phy(struct net_device *dev)
 180{
 181        struct amd8111e_priv *lp = netdev_priv(dev);
 182        u32 bmcr, advert, tmp;
 183
 184        /* Determine mii register values to set the speed */
 185        advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
 186        tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 187        switch (lp->ext_phy_option) {
 188
 189                default:
 190                case SPEED_AUTONEG: /* advertise all values */
 191                        tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
 192                                ADVERTISE_100HALF | ADVERTISE_100FULL);
 193                        break;
 194                case SPEED10_HALF:
 195                        tmp |= ADVERTISE_10HALF;
 196                        break;
 197                case SPEED10_FULL:
 198                        tmp |= ADVERTISE_10FULL;
 199                        break;
 200                case SPEED100_HALF:
 201                        tmp |= ADVERTISE_100HALF;
 202                        break;
 203                case SPEED100_FULL:
 204                        tmp |= ADVERTISE_100FULL;
 205                        break;
 206        }
 207
 208        if(advert != tmp)
 209                amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
 210        /* Restart auto negotiation */
 211        bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
 212        bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
 213        amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
 214
 215}
 216
 217/* This function will unmap skb->data space and will free
 218 * all transmit and receive skbuffs.
 219 */
 220static int amd8111e_free_skbs(struct net_device *dev)
 221{
 222        struct amd8111e_priv *lp = netdev_priv(dev);
 223        struct sk_buff *rx_skbuff;
 224        int i;
 225
 226        /* Freeing transmit skbs */
 227        for (i = 0; i < NUM_TX_BUFFERS; i++) {
 228                if (lp->tx_skbuff[i]) {
 229                        dma_unmap_single(&lp->pci_dev->dev,
 230                                         lp->tx_dma_addr[i],
 231                                         lp->tx_skbuff[i]->len, DMA_TO_DEVICE);
 232                        dev_kfree_skb(lp->tx_skbuff[i]);
 233                        lp->tx_skbuff[i] = NULL;
 234                        lp->tx_dma_addr[i] = 0;
 235                }
 236        }
 237        /* Freeing previously allocated receive buffers */
 238        for (i = 0; i < NUM_RX_BUFFERS; i++) {
 239                rx_skbuff = lp->rx_skbuff[i];
 240                if (rx_skbuff != NULL) {
 241                        dma_unmap_single(&lp->pci_dev->dev,
 242                                         lp->rx_dma_addr[i],
 243                                         lp->rx_buff_len - 2, DMA_FROM_DEVICE);
 244                        dev_kfree_skb(lp->rx_skbuff[i]);
 245                        lp->rx_skbuff[i] = NULL;
 246                        lp->rx_dma_addr[i] = 0;
 247                }
 248        }
 249
 250        return 0;
 251}
 252
 253/* This will set the receive buffer length corresponding
 254 * to the mtu size of networkinterface.
 255 */
 256static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
 257{
 258        struct amd8111e_priv *lp = netdev_priv(dev);
 259        unsigned int mtu = dev->mtu;
 260
 261        if (mtu > ETH_DATA_LEN) {
 262                /* MTU + ethernet header + FCS
 263                 * + optional VLAN tag + skb reserve space 2
 264                 */
 265                lp->rx_buff_len = mtu + ETH_HLEN + 10;
 266                lp->options |= OPTION_JUMBO_ENABLE;
 267        } else {
 268                lp->rx_buff_len = PKT_BUFF_SZ;
 269                lp->options &= ~OPTION_JUMBO_ENABLE;
 270        }
 271}
 272
 273/* This function will free all the previously allocated buffers,
 274 * determine new receive buffer length  and will allocate new receive buffers.
 275 * This function also allocates and initializes both the transmitter
 276 * and receive hardware descriptors.
 277 */
 278static int amd8111e_init_ring(struct net_device *dev)
 279{
 280        struct amd8111e_priv *lp = netdev_priv(dev);
 281        int i;
 282
 283        lp->rx_idx = lp->tx_idx = 0;
 284        lp->tx_complete_idx = 0;
 285        lp->tx_ring_idx = 0;
 286
 287
 288        if (lp->opened)
 289                /* Free previously allocated transmit and receive skbs */
 290                amd8111e_free_skbs(dev);
 291
 292        else {
 293                /* allocate the tx and rx descriptors */
 294                lp->tx_ring = dma_alloc_coherent(&lp->pci_dev->dev,
 295                        sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR,
 296                        &lp->tx_ring_dma_addr, GFP_ATOMIC);
 297                if (!lp->tx_ring)
 298                        goto err_no_mem;
 299
 300                lp->rx_ring = dma_alloc_coherent(&lp->pci_dev->dev,
 301                        sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR,
 302                        &lp->rx_ring_dma_addr, GFP_ATOMIC);
 303                if (!lp->rx_ring)
 304                        goto err_free_tx_ring;
 305        }
 306
 307        /* Set new receive buff size */
 308        amd8111e_set_rx_buff_len(dev);
 309
 310        /* Allocating receive  skbs */
 311        for (i = 0; i < NUM_RX_BUFFERS; i++) {
 312
 313                lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
 314                if (!lp->rx_skbuff[i]) {
 315                        /* Release previos allocated skbs */
 316                        for (--i; i >= 0; i--)
 317                                dev_kfree_skb(lp->rx_skbuff[i]);
 318                        goto err_free_rx_ring;
 319                }
 320                skb_reserve(lp->rx_skbuff[i], 2);
 321        }
 322        /* Initilaizing receive descriptors */
 323        for (i = 0; i < NUM_RX_BUFFERS; i++) {
 324                lp->rx_dma_addr[i] = dma_map_single(&lp->pci_dev->dev,
 325                                                    lp->rx_skbuff[i]->data,
 326                                                    lp->rx_buff_len - 2,
 327                                                    DMA_FROM_DEVICE);
 328
 329                lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
 330                lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
 331                wmb();
 332                lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
 333        }
 334
 335        /* Initializing transmit descriptors */
 336        for (i = 0; i < NUM_TX_RING_DR; i++) {
 337                lp->tx_ring[i].buff_phy_addr = 0;
 338                lp->tx_ring[i].tx_flags = 0;
 339                lp->tx_ring[i].buff_count = 0;
 340        }
 341
 342        return 0;
 343
 344err_free_rx_ring:
 345
 346        dma_free_coherent(&lp->pci_dev->dev,
 347                          sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR,
 348                          lp->rx_ring, lp->rx_ring_dma_addr);
 349
 350err_free_tx_ring:
 351
 352        dma_free_coherent(&lp->pci_dev->dev,
 353                          sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR,
 354                          lp->tx_ring, lp->tx_ring_dma_addr);
 355
 356err_no_mem:
 357        return -ENOMEM;
 358}
 359
 360/* This function will set the interrupt coalescing according
 361 * to the input arguments
 362 */
 363static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
 364{
 365        unsigned int timeout;
 366        unsigned int event_count;
 367
 368        struct amd8111e_priv *lp = netdev_priv(dev);
 369        void __iomem *mmio = lp->mmio;
 370        struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
 371
 372
 373        switch(cmod)
 374        {
 375                case RX_INTR_COAL :
 376                        timeout = coal_conf->rx_timeout;
 377                        event_count = coal_conf->rx_event_count;
 378                        if (timeout > MAX_TIMEOUT ||
 379                            event_count > MAX_EVENT_COUNT)
 380                                return -EINVAL;
 381
 382                        timeout = timeout * DELAY_TIMER_CONV;
 383                        writel(VAL0|STINTEN, mmio+INTEN0);
 384                        writel((u32)DLY_INT_A_R0 | (event_count << 16) |
 385                                timeout, mmio + DLY_INT_A);
 386                        break;
 387
 388                case TX_INTR_COAL:
 389                        timeout = coal_conf->tx_timeout;
 390                        event_count = coal_conf->tx_event_count;
 391                        if (timeout > MAX_TIMEOUT ||
 392                            event_count > MAX_EVENT_COUNT)
 393                                return -EINVAL;
 394
 395
 396                        timeout = timeout * DELAY_TIMER_CONV;
 397                        writel(VAL0 | STINTEN, mmio + INTEN0);
 398                        writel((u32)DLY_INT_B_T0 | (event_count << 16) |
 399                                timeout, mmio + DLY_INT_B);
 400                        break;
 401
 402                case DISABLE_COAL:
 403                        writel(0, mmio + STVAL);
 404                        writel(STINTEN, mmio + INTEN0);
 405                        writel(0, mmio + DLY_INT_B);
 406                        writel(0, mmio + DLY_INT_A);
 407                        break;
 408                 case ENABLE_COAL:
 409                       /* Start the timer */
 410                        writel((u32)SOFT_TIMER_FREQ, mmio + STVAL); /* 0.5 sec */
 411                        writel(VAL0 | STINTEN, mmio + INTEN0);
 412                        break;
 413                default:
 414                        break;
 415
 416   }
 417        return 0;
 418
 419}
 420
 421/* This function initializes the device registers  and starts the device. */
 422static int amd8111e_restart(struct net_device *dev)
 423{
 424        struct amd8111e_priv *lp = netdev_priv(dev);
 425        void __iomem *mmio = lp->mmio;
 426        int i, reg_val;
 427
 428        /* stop the chip */
 429        writel(RUN, mmio + CMD0);
 430
 431        if (amd8111e_init_ring(dev))
 432                return -ENOMEM;
 433
 434        /* enable the port manager and set auto negotiation always */
 435        writel((u32)VAL1 | EN_PMGR, mmio + CMD3);
 436        writel((u32)XPHYANE | XPHYRST, mmio + CTRL2);
 437
 438        amd8111e_set_ext_phy(dev);
 439
 440        /* set control registers */
 441        reg_val = readl(mmio + CTRL1);
 442        reg_val &= ~XMTSP_MASK;
 443        writel(reg_val | XMTSP_128 | CACHE_ALIGN, mmio + CTRL1);
 444
 445        /* enable interrupt */
 446        writel(APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
 447                APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
 448                SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
 449
 450        writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
 451
 452        /* initialize tx and rx ring base addresses */
 453        writel((u32)lp->tx_ring_dma_addr, mmio + XMT_RING_BASE_ADDR0);
 454        writel((u32)lp->rx_ring_dma_addr, mmio + RCV_RING_BASE_ADDR0);
 455
 456        writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
 457        writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
 458
 459        /* set default IPG to 96 */
 460        writew((u32)DEFAULT_IPG, mmio + IPG);
 461        writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
 462
 463        if (lp->options & OPTION_JUMBO_ENABLE) {
 464                writel((u32)VAL2|JUMBO, mmio + CMD3);
 465                /* Reset REX_UFLO */
 466                writel(REX_UFLO, mmio + CMD2);
 467                /* Should not set REX_UFLO for jumbo frames */
 468                writel(VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2);
 469        } else {
 470                writel(VAL0 | APAD_XMT | REX_RTRY | REX_UFLO, mmio + CMD2);
 471                writel((u32)JUMBO, mmio + CMD3);
 472        }
 473
 474#if AMD8111E_VLAN_TAG_USED
 475        writel((u32)VAL2 | VSIZE | VL_TAG_DEL, mmio + CMD3);
 476#endif
 477        writel(VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2);
 478
 479        /* Setting the MAC address to the device */
 480        for (i = 0; i < ETH_ALEN; i++)
 481                writeb(dev->dev_addr[i], mmio + PADR + i);
 482
 483        /* Enable interrupt coalesce */
 484        if (lp->options & OPTION_INTR_COAL_ENABLE) {
 485                netdev_info(dev, "Interrupt Coalescing Enabled.\n");
 486                amd8111e_set_coalesce(dev, ENABLE_COAL);
 487        }
 488
 489        /* set RUN bit to start the chip */
 490        writel(VAL2 | RDMD0, mmio + CMD0);
 491        writel(VAL0 | INTREN | RUN, mmio + CMD0);
 492
 493        /* To avoid PCI posting bug */
 494        readl(mmio+CMD0);
 495        return 0;
 496}
 497
 498/* This function clears necessary the device registers. */
 499static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
 500{
 501        unsigned int reg_val;
 502        unsigned int logic_filter[2] = {0,};
 503        void __iomem *mmio = lp->mmio;
 504
 505
 506        /* stop the chip */
 507        writel(RUN, mmio + CMD0);
 508
 509        /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
 510        writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
 511
 512        /* Clear RCV_RING_BASE_ADDR */
 513        writel(0, mmio + RCV_RING_BASE_ADDR0);
 514
 515        /* Clear XMT_RING_BASE_ADDR */
 516        writel(0, mmio + XMT_RING_BASE_ADDR0);
 517        writel(0, mmio + XMT_RING_BASE_ADDR1);
 518        writel(0, mmio + XMT_RING_BASE_ADDR2);
 519        writel(0, mmio + XMT_RING_BASE_ADDR3);
 520
 521        /* Clear CMD0  */
 522        writel(CMD0_CLEAR, mmio + CMD0);
 523
 524        /* Clear CMD2 */
 525        writel(CMD2_CLEAR, mmio + CMD2);
 526
 527        /* Clear CMD7 */
 528        writel(CMD7_CLEAR, mmio + CMD7);
 529
 530        /* Clear DLY_INT_A and DLY_INT_B */
 531        writel(0x0, mmio + DLY_INT_A);
 532        writel(0x0, mmio + DLY_INT_B);
 533
 534        /* Clear FLOW_CONTROL */
 535        writel(0x0, mmio + FLOW_CONTROL);
 536
 537        /* Clear INT0  write 1 to clear register */
 538        reg_val = readl(mmio + INT0);
 539        writel(reg_val, mmio + INT0);
 540
 541        /* Clear STVAL */
 542        writel(0x0, mmio + STVAL);
 543
 544        /* Clear INTEN0 */
 545        writel(INTEN0_CLEAR, mmio + INTEN0);
 546
 547        /* Clear LADRF */
 548        writel(0x0, mmio + LADRF);
 549
 550        /* Set SRAM_SIZE & SRAM_BOUNDARY registers  */
 551        writel(0x80010, mmio + SRAM_SIZE);
 552
 553        /* Clear RCV_RING0_LEN */
 554        writel(0x0, mmio + RCV_RING_LEN0);
 555
 556        /* Clear XMT_RING0/1/2/3_LEN */
 557        writel(0x0, mmio +  XMT_RING_LEN0);
 558        writel(0x0, mmio +  XMT_RING_LEN1);
 559        writel(0x0, mmio +  XMT_RING_LEN2);
 560        writel(0x0, mmio +  XMT_RING_LEN3);
 561
 562        /* Clear XMT_RING_LIMIT */
 563        writel(0x0, mmio + XMT_RING_LIMIT);
 564
 565        /* Clear MIB */
 566        writew(MIB_CLEAR, mmio + MIB_ADDR);
 567
 568        /* Clear LARF */
 569        amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
 570
 571        /* SRAM_SIZE register */
 572        reg_val = readl(mmio + SRAM_SIZE);
 573
 574        if (lp->options & OPTION_JUMBO_ENABLE)
 575                writel(VAL2 | JUMBO, mmio + CMD3);
 576#if AMD8111E_VLAN_TAG_USED
 577        writel(VAL2 | VSIZE | VL_TAG_DEL, mmio + CMD3);
 578#endif
 579        /* Set default value to CTRL1 Register */
 580        writel(CTRL1_DEFAULT, mmio + CTRL1);
 581
 582        /* To avoid PCI posting bug */
 583        readl(mmio + CMD2);
 584
 585}
 586
 587/* This function disables the interrupt and clears all the pending
 588 * interrupts in INT0
 589 */
 590static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
 591{
 592        u32 intr0;
 593
 594        /* Disable interrupt */
 595        writel(INTREN, lp->mmio + CMD0);
 596
 597        /* Clear INT0 */
 598        intr0 = readl(lp->mmio + INT0);
 599        writel(intr0, lp->mmio + INT0);
 600
 601        /* To avoid PCI posting bug */
 602        readl(lp->mmio + INT0);
 603
 604}
 605
 606/* This function stops the chip. */
 607static void amd8111e_stop_chip(struct amd8111e_priv *lp)
 608{
 609        writel(RUN, lp->mmio + CMD0);
 610
 611        /* To avoid PCI posting bug */
 612        readl(lp->mmio + CMD0);
 613}
 614
 615/* This function frees the  transmiter and receiver descriptor rings. */
 616static void amd8111e_free_ring(struct amd8111e_priv *lp)
 617{
 618        /* Free transmit and receive descriptor rings */
 619        if (lp->rx_ring) {
 620                dma_free_coherent(&lp->pci_dev->dev,
 621                                  sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR,
 622                                  lp->rx_ring, lp->rx_ring_dma_addr);
 623                lp->rx_ring = NULL;
 624        }
 625
 626        if (lp->tx_ring) {
 627                dma_free_coherent(&lp->pci_dev->dev,
 628                                  sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR,
 629                                  lp->tx_ring, lp->tx_ring_dma_addr);
 630
 631                lp->tx_ring = NULL;
 632        }
 633
 634}
 635
 636/* This function will free all the transmit skbs that are actually
 637 * transmitted by the device. It will check the ownership of the
 638 * skb before freeing the skb.
 639 */
 640static int amd8111e_tx(struct net_device *dev)
 641{
 642        struct amd8111e_priv *lp = netdev_priv(dev);
 643        int tx_index;
 644        int status;
 645        /* Complete all the transmit packet */
 646        while (lp->tx_complete_idx != lp->tx_idx) {
 647                tx_index =  lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
 648                status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
 649
 650                if (status & OWN_BIT)
 651                        break;  /* It still hasn't been Txed */
 652
 653                lp->tx_ring[tx_index].buff_phy_addr = 0;
 654
 655                /* We must free the original skb */
 656                if (lp->tx_skbuff[tx_index]) {
 657                        dma_unmap_single(&lp->pci_dev->dev,
 658                                         lp->tx_dma_addr[tx_index],
 659                                         lp->tx_skbuff[tx_index]->len,
 660                                         DMA_TO_DEVICE);
 661                        dev_consume_skb_irq(lp->tx_skbuff[tx_index]);
 662                        lp->tx_skbuff[tx_index] = NULL;
 663                        lp->tx_dma_addr[tx_index] = 0;
 664                }
 665                lp->tx_complete_idx++;
 666                /*COAL update tx coalescing parameters */
 667                lp->coal_conf.tx_packets++;
 668                lp->coal_conf.tx_bytes +=
 669                        le16_to_cpu(lp->tx_ring[tx_index].buff_count);
 670
 671                if (netif_queue_stopped(dev) &&
 672                        lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS + 2) {
 673                        /* The ring is no longer full, clear tbusy. */
 674                        /* lp->tx_full = 0; */
 675                        netif_wake_queue(dev);
 676                }
 677        }
 678        return 0;
 679}
 680
 681/* This function handles the driver receive operation in polling mode */
 682static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
 683{
 684        struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
 685        struct net_device *dev = lp->amd8111e_net_dev;
 686        int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
 687        void __iomem *mmio = lp->mmio;
 688        struct sk_buff *skb, *new_skb;
 689        int min_pkt_len, status;
 690        int num_rx_pkt = 0;
 691        short pkt_len;
 692#if AMD8111E_VLAN_TAG_USED
 693        short vtag;
 694#endif
 695
 696        while (num_rx_pkt < budget) {
 697                status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
 698                if (status & OWN_BIT)
 699                        break;
 700
 701                /* There is a tricky error noted by John Murphy,
 702                 * <murf@perftech.com> to Russ Nelson: Even with
 703                 * full-sized * buffers it's possible for a
 704                 * jabber packet to use two buffers, with only
 705                 * the last correctly noting the error.
 706                 */
 707                if (status & ERR_BIT) {
 708                        /* resetting flags */
 709                        lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 710                        goto err_next_pkt;
 711                }
 712                /* check for STP and ENP */
 713                if (!((status & STP_BIT) && (status & ENP_BIT))) {
 714                        /* resetting flags */
 715                        lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 716                        goto err_next_pkt;
 717                }
 718                pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
 719
 720#if AMD8111E_VLAN_TAG_USED
 721                vtag = status & TT_MASK;
 722                /* MAC will strip vlan tag */
 723                if (vtag != 0)
 724                        min_pkt_len = MIN_PKT_LEN - 4;
 725                        else
 726#endif
 727                        min_pkt_len = MIN_PKT_LEN;
 728
 729                if (pkt_len < min_pkt_len) {
 730                        lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 731                        lp->drv_rx_errors++;
 732                        goto err_next_pkt;
 733                }
 734                new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
 735                if (!new_skb) {
 736                        /* if allocation fail,
 737                         * ignore that pkt and go to next one
 738                         */
 739                        lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 740                        lp->drv_rx_errors++;
 741                        goto err_next_pkt;
 742                }
 743
 744                skb_reserve(new_skb, 2);
 745                skb = lp->rx_skbuff[rx_index];
 746                dma_unmap_single(&lp->pci_dev->dev, lp->rx_dma_addr[rx_index],
 747                                 lp->rx_buff_len - 2, DMA_FROM_DEVICE);
 748                skb_put(skb, pkt_len);
 749                lp->rx_skbuff[rx_index] = new_skb;
 750                lp->rx_dma_addr[rx_index] = dma_map_single(&lp->pci_dev->dev,
 751                                                           new_skb->data,
 752                                                           lp->rx_buff_len - 2,
 753                                                           DMA_FROM_DEVICE);
 754
 755                skb->protocol = eth_type_trans(skb, dev);
 756
 757#if AMD8111E_VLAN_TAG_USED
 758                if (vtag == TT_VLAN_TAGGED) {
 759                        u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
 760                        __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
 761                }
 762#endif
 763                napi_gro_receive(napi, skb);
 764                /* COAL update rx coalescing parameters */
 765                lp->coal_conf.rx_packets++;
 766                lp->coal_conf.rx_bytes += pkt_len;
 767                num_rx_pkt++;
 768
 769err_next_pkt:
 770                lp->rx_ring[rx_index].buff_phy_addr
 771                        = cpu_to_le32(lp->rx_dma_addr[rx_index]);
 772                lp->rx_ring[rx_index].buff_count =
 773                        cpu_to_le16(lp->rx_buff_len-2);
 774                wmb();
 775                lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
 776                rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
 777        }
 778
 779        if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) {
 780                unsigned long flags;
 781
 782                /* Receive descriptor is empty now */
 783                spin_lock_irqsave(&lp->lock, flags);
 784                writel(VAL0|RINTEN0, mmio + INTEN0);
 785                writel(VAL2 | RDMD0, mmio + CMD0);
 786                spin_unlock_irqrestore(&lp->lock, flags);
 787        }
 788
 789        return num_rx_pkt;
 790}
 791
 792/* This function will indicate the link status to the kernel. */
 793static int amd8111e_link_change(struct net_device *dev)
 794{
 795        struct amd8111e_priv *lp = netdev_priv(dev);
 796        int status0, speed;
 797
 798        /* read the link change */
 799        status0 = readl(lp->mmio + STAT0);
 800
 801        if (status0 & LINK_STATS) {
 802                if (status0 & AUTONEG_COMPLETE)
 803                        lp->link_config.autoneg = AUTONEG_ENABLE;
 804                else
 805                        lp->link_config.autoneg = AUTONEG_DISABLE;
 806
 807                if (status0 & FULL_DPLX)
 808                        lp->link_config.duplex = DUPLEX_FULL;
 809                else
 810                        lp->link_config.duplex = DUPLEX_HALF;
 811                speed = (status0 & SPEED_MASK) >> 7;
 812                if (speed == PHY_SPEED_10)
 813                        lp->link_config.speed = SPEED_10;
 814                else if (speed == PHY_SPEED_100)
 815                        lp->link_config.speed = SPEED_100;
 816
 817                netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
 818                            (lp->link_config.speed == SPEED_100) ?
 819                                                        "100" : "10",
 820                            (lp->link_config.duplex == DUPLEX_FULL) ?
 821                                                        "Full" : "Half");
 822
 823                netif_carrier_on(dev);
 824        } else {
 825                lp->link_config.speed = SPEED_INVALID;
 826                lp->link_config.duplex = DUPLEX_INVALID;
 827                lp->link_config.autoneg = AUTONEG_INVALID;
 828                netdev_info(dev, "Link is Down.\n");
 829                netif_carrier_off(dev);
 830        }
 831
 832        return 0;
 833}
 834
 835/* This function reads the mib counters. */
 836static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
 837{
 838        unsigned int  status;
 839        unsigned  int data;
 840        unsigned int repeat = REPEAT_CNT;
 841
 842        writew(MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
 843        do {
 844                status = readw(mmio + MIB_ADDR);
 845                udelay(2);      /* controller takes MAX 2 us to get mib data */
 846        }
 847        while (--repeat && (status & MIB_CMD_ACTIVE));
 848
 849        data = readl(mmio + MIB_DATA);
 850        return data;
 851}
 852
 853/* This function reads the mib registers and returns the hardware statistics.
 854 * It updates previous internal driver statistics with new values.
 855 */
 856static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
 857{
 858        struct amd8111e_priv *lp = netdev_priv(dev);
 859        void __iomem *mmio = lp->mmio;
 860        unsigned long flags;
 861        struct net_device_stats *new_stats = &dev->stats;
 862
 863        if (!lp->opened)
 864                return new_stats;
 865        spin_lock_irqsave(&lp->lock, flags);
 866
 867        /* stats.rx_packets */
 868        new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
 869                                amd8111e_read_mib(mmio, rcv_multicast_pkts)+
 870                                amd8111e_read_mib(mmio, rcv_unicast_pkts);
 871
 872        /* stats.tx_packets */
 873        new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
 874
 875        /*stats.rx_bytes */
 876        new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
 877
 878        /* stats.tx_bytes */
 879        new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
 880
 881        /* stats.rx_errors */
 882        /* hw errors + errors driver reported */
 883        new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
 884                                amd8111e_read_mib(mmio, rcv_fragments)+
 885                                amd8111e_read_mib(mmio, rcv_jabbers)+
 886                                amd8111e_read_mib(mmio, rcv_alignment_errors)+
 887                                amd8111e_read_mib(mmio, rcv_fcs_errors)+
 888                                amd8111e_read_mib(mmio, rcv_miss_pkts)+
 889                                lp->drv_rx_errors;
 890
 891        /* stats.tx_errors */
 892        new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
 893
 894        /* stats.rx_dropped*/
 895        new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
 896
 897        /* stats.tx_dropped*/
 898        new_stats->tx_dropped = amd8111e_read_mib(mmio,  xmt_underrun_pkts);
 899
 900        /* stats.multicast*/
 901        new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
 902
 903        /* stats.collisions*/
 904        new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
 905
 906        /* stats.rx_length_errors*/
 907        new_stats->rx_length_errors =
 908                amd8111e_read_mib(mmio, rcv_undersize_pkts)+
 909                amd8111e_read_mib(mmio, rcv_oversize_pkts);
 910
 911        /* stats.rx_over_errors*/
 912        new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 913
 914        /* stats.rx_crc_errors*/
 915        new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
 916
 917        /* stats.rx_frame_errors*/
 918        new_stats->rx_frame_errors =
 919                amd8111e_read_mib(mmio, rcv_alignment_errors);
 920
 921        /* stats.rx_fifo_errors */
 922        new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 923
 924        /* stats.rx_missed_errors */
 925        new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 926
 927        /* stats.tx_aborted_errors*/
 928        new_stats->tx_aborted_errors =
 929                amd8111e_read_mib(mmio, xmt_excessive_collision);
 930
 931        /* stats.tx_carrier_errors*/
 932        new_stats->tx_carrier_errors =
 933                amd8111e_read_mib(mmio, xmt_loss_carrier);
 934
 935        /* stats.tx_fifo_errors*/
 936        new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
 937
 938        /* stats.tx_window_errors*/
 939        new_stats->tx_window_errors =
 940                amd8111e_read_mib(mmio, xmt_late_collision);
 941
 942        /* Reset the mibs for collecting new statistics */
 943        /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
 944
 945        spin_unlock_irqrestore(&lp->lock, flags);
 946
 947        return new_stats;
 948}
 949
 950/* This function recalculate the interrupt coalescing  mode on every interrupt
 951 * according to the datarate and the packet rate.
 952 */
 953static int amd8111e_calc_coalesce(struct net_device *dev)
 954{
 955        struct amd8111e_priv *lp = netdev_priv(dev);
 956        struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
 957        int tx_pkt_rate;
 958        int rx_pkt_rate;
 959        int tx_data_rate;
 960        int rx_data_rate;
 961        int rx_pkt_size;
 962        int tx_pkt_size;
 963
 964        tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
 965        coal_conf->tx_prev_packets =  coal_conf->tx_packets;
 966
 967        tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
 968        coal_conf->tx_prev_bytes =  coal_conf->tx_bytes;
 969
 970        rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
 971        coal_conf->rx_prev_packets =  coal_conf->rx_packets;
 972
 973        rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
 974        coal_conf->rx_prev_bytes =  coal_conf->rx_bytes;
 975
 976        if (rx_pkt_rate < 800) {
 977                if (coal_conf->rx_coal_type != NO_COALESCE) {
 978
 979                        coal_conf->rx_timeout = 0x0;
 980                        coal_conf->rx_event_count = 0;
 981                        amd8111e_set_coalesce(dev, RX_INTR_COAL);
 982                        coal_conf->rx_coal_type = NO_COALESCE;
 983                }
 984        } else {
 985
 986                rx_pkt_size = rx_data_rate/rx_pkt_rate;
 987                if (rx_pkt_size < 128) {
 988                        if (coal_conf->rx_coal_type != NO_COALESCE) {
 989
 990                                coal_conf->rx_timeout = 0;
 991                                coal_conf->rx_event_count = 0;
 992                                amd8111e_set_coalesce(dev, RX_INTR_COAL);
 993                                coal_conf->rx_coal_type = NO_COALESCE;
 994                        }
 995
 996                } else if ((rx_pkt_size >= 128) && (rx_pkt_size < 512)) {
 997
 998                        if (coal_conf->rx_coal_type !=  LOW_COALESCE) {
 999                                coal_conf->rx_timeout = 1;
1000                                coal_conf->rx_event_count = 4;
1001                                amd8111e_set_coalesce(dev, RX_INTR_COAL);
1002                                coal_conf->rx_coal_type = LOW_COALESCE;
1003                        }
1004                } else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)) {
1005
1006                        if (coal_conf->rx_coal_type != MEDIUM_COALESCE) {
1007                                coal_conf->rx_timeout = 1;
1008                                coal_conf->rx_event_count = 4;
1009                                amd8111e_set_coalesce(dev, RX_INTR_COAL);
1010                                coal_conf->rx_coal_type = MEDIUM_COALESCE;
1011                        }
1012
1013                } else if (rx_pkt_size >= 1024) {
1014
1015                        if (coal_conf->rx_coal_type !=  HIGH_COALESCE) {
1016                                coal_conf->rx_timeout = 2;
1017                                coal_conf->rx_event_count = 3;
1018                                amd8111e_set_coalesce(dev, RX_INTR_COAL);
1019                                coal_conf->rx_coal_type = HIGH_COALESCE;
1020                        }
1021                }
1022        }
1023        /* NOW FOR TX INTR COALESC */
1024        if (tx_pkt_rate < 800) {
1025                if (coal_conf->tx_coal_type != NO_COALESCE) {
1026
1027                        coal_conf->tx_timeout = 0x0;
1028                        coal_conf->tx_event_count = 0;
1029                        amd8111e_set_coalesce(dev, TX_INTR_COAL);
1030                        coal_conf->tx_coal_type = NO_COALESCE;
1031                }
1032        } else {
1033
1034                tx_pkt_size = tx_data_rate/tx_pkt_rate;
1035                if (tx_pkt_size < 128) {
1036
1037                        if (coal_conf->tx_coal_type != NO_COALESCE) {
1038
1039                                coal_conf->tx_timeout = 0;
1040                                coal_conf->tx_event_count = 0;
1041                                amd8111e_set_coalesce(dev, TX_INTR_COAL);
1042                                coal_conf->tx_coal_type = NO_COALESCE;
1043                        }
1044
1045                } else if ((tx_pkt_size >= 128) && (tx_pkt_size < 512)) {
1046
1047                        if (coal_conf->tx_coal_type != LOW_COALESCE) {
1048                                coal_conf->tx_timeout = 1;
1049                                coal_conf->tx_event_count = 2;
1050                                amd8111e_set_coalesce(dev, TX_INTR_COAL);
1051                                coal_conf->tx_coal_type = LOW_COALESCE;
1052
1053                        }
1054                } else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)) {
1055
1056                        if (coal_conf->tx_coal_type != MEDIUM_COALESCE) {
1057                                coal_conf->tx_timeout = 2;
1058                                coal_conf->tx_event_count = 5;
1059                                amd8111e_set_coalesce(dev, TX_INTR_COAL);
1060                                coal_conf->tx_coal_type = MEDIUM_COALESCE;
1061                        }
1062                } else if (tx_pkt_size >= 1024) {
1063                        if (coal_conf->tx_coal_type != HIGH_COALESCE) {
1064                                coal_conf->tx_timeout = 4;
1065                                coal_conf->tx_event_count = 8;
1066                                amd8111e_set_coalesce(dev, TX_INTR_COAL);
1067                                coal_conf->tx_coal_type = HIGH_COALESCE;
1068                        }
1069                }
1070        }
1071        return 0;
1072
1073}
1074
1075/* This is device interrupt function. It handles transmit,
1076 * receive,link change and hardware timer interrupts.
1077 */
1078static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1079{
1080
1081        struct net_device *dev = (struct net_device *)dev_id;
1082        struct amd8111e_priv *lp = netdev_priv(dev);
1083        void __iomem *mmio = lp->mmio;
1084        unsigned int intr0, intren0;
1085        unsigned int handled = 1;
1086
1087        if (unlikely(dev == NULL))
1088                return IRQ_NONE;
1089
1090        spin_lock(&lp->lock);
1091
1092        /* disabling interrupt */
1093        writel(INTREN, mmio + CMD0);
1094
1095        /* Read interrupt status */
1096        intr0 = readl(mmio + INT0);
1097        intren0 = readl(mmio + INTEN0);
1098
1099        /* Process all the INT event until INTR bit is clear. */
1100
1101        if (!(intr0 & INTR)) {
1102                handled = 0;
1103                goto err_no_interrupt;
1104        }
1105
1106        /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1107        writel(intr0, mmio + INT0);
1108
1109        /* Check if Receive Interrupt has occurred. */
1110        if (intr0 & RINT0) {
1111                if (napi_schedule_prep(&lp->napi)) {
1112                        /* Disable receive interupts */
1113                        writel(RINTEN0, mmio + INTEN0);
1114                        /* Schedule a polling routine */
1115                        __napi_schedule(&lp->napi);
1116                } else if (intren0 & RINTEN0) {
1117                        netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
1118                        /* Fix by disable receive interrupts */
1119                        writel(RINTEN0, mmio + INTEN0);
1120                }
1121        }
1122
1123        /* Check if  Transmit Interrupt has occurred. */
1124        if (intr0 & TINT0)
1125                amd8111e_tx(dev);
1126
1127        /* Check if  Link Change Interrupt has occurred. */
1128        if (intr0 & LCINT)
1129                amd8111e_link_change(dev);
1130
1131        /* Check if Hardware Timer Interrupt has occurred. */
1132        if (intr0 & STINT)
1133                amd8111e_calc_coalesce(dev);
1134
1135err_no_interrupt:
1136        writel(VAL0 | INTREN, mmio + CMD0);
1137
1138        spin_unlock(&lp->lock);
1139
1140        return IRQ_RETVAL(handled);
1141}
1142
1143#ifdef CONFIG_NET_POLL_CONTROLLER
1144static void amd8111e_poll(struct net_device *dev)
1145{
1146        unsigned long flags;
1147        local_irq_save(flags);
1148        amd8111e_interrupt(0, dev);
1149        local_irq_restore(flags);
1150}
1151#endif
1152
1153
1154/* This function closes the network interface and updates
1155 * the statistics so that most recent statistics will be
1156 * available after the interface is down.
1157 */
1158static int amd8111e_close(struct net_device *dev)
1159{
1160        struct amd8111e_priv *lp = netdev_priv(dev);
1161        netif_stop_queue(dev);
1162
1163        napi_disable(&lp->napi);
1164
1165        spin_lock_irq(&lp->lock);
1166
1167        amd8111e_disable_interrupt(lp);
1168        amd8111e_stop_chip(lp);
1169
1170        /* Free transmit and receive skbs */
1171        amd8111e_free_skbs(lp->amd8111e_net_dev);
1172
1173        netif_carrier_off(lp->amd8111e_net_dev);
1174
1175        /* Delete ipg timer */
1176        if (lp->options & OPTION_DYN_IPG_ENABLE)
1177                del_timer_sync(&lp->ipg_data.ipg_timer);
1178
1179        spin_unlock_irq(&lp->lock);
1180        free_irq(dev->irq, dev);
1181        amd8111e_free_ring(lp);
1182
1183        /* Update the statistics before closing */
1184        amd8111e_get_stats(dev);
1185        lp->opened = 0;
1186        return 0;
1187}
1188
1189/* This function opens new interface.It requests irq for the device,
1190 * initializes the device,buffers and descriptors, and starts the device.
1191 */
1192static int amd8111e_open(struct net_device *dev)
1193{
1194        struct amd8111e_priv *lp = netdev_priv(dev);
1195
1196        if (dev->irq == 0 || request_irq(dev->irq, amd8111e_interrupt,
1197                                         IRQF_SHARED, dev->name, dev))
1198                return -EAGAIN;
1199
1200        napi_enable(&lp->napi);
1201
1202        spin_lock_irq(&lp->lock);
1203
1204        amd8111e_init_hw_default(lp);
1205
1206        if (amd8111e_restart(dev)) {
1207                spin_unlock_irq(&lp->lock);
1208                napi_disable(&lp->napi);
1209                if (dev->irq)
1210                        free_irq(dev->irq, dev);
1211                return -ENOMEM;
1212        }
1213        /* Start ipg timer */
1214        if (lp->options & OPTION_DYN_IPG_ENABLE) {
1215                add_timer(&lp->ipg_data.ipg_timer);
1216                netdev_info(dev, "Dynamic IPG Enabled\n");
1217        }
1218
1219        lp->opened = 1;
1220
1221        spin_unlock_irq(&lp->lock);
1222
1223        netif_start_queue(dev);
1224
1225        return 0;
1226}
1227
1228/* This function checks if there is any transmit  descriptors
1229 * available to queue more packet.
1230 */
1231static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
1232{
1233        int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1234        if (lp->tx_skbuff[tx_index])
1235                return -1;
1236        else
1237                return 0;
1238
1239}
1240
1241/* This function will queue the transmit packets to the
1242 * descriptors and will trigger the send operation. It also
1243 * initializes the transmit descriptors with buffer physical address,
1244 * byte count, ownership to hardware etc.
1245 */
1246static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1247                                       struct net_device *dev)
1248{
1249        struct amd8111e_priv *lp = netdev_priv(dev);
1250        int tx_index;
1251        unsigned long flags;
1252
1253        spin_lock_irqsave(&lp->lock, flags);
1254
1255        tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1256
1257        lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1258
1259        lp->tx_skbuff[tx_index] = skb;
1260        lp->tx_ring[tx_index].tx_flags = 0;
1261
1262#if AMD8111E_VLAN_TAG_USED
1263        if (skb_vlan_tag_present(skb)) {
1264                lp->tx_ring[tx_index].tag_ctrl_cmd |=
1265                                cpu_to_le16(TCC_VLAN_INSERT);
1266                lp->tx_ring[tx_index].tag_ctrl_info =
1267                                cpu_to_le16(skb_vlan_tag_get(skb));
1268
1269        }
1270#endif
1271        lp->tx_dma_addr[tx_index] =
1272            dma_map_single(&lp->pci_dev->dev, skb->data, skb->len,
1273                           DMA_TO_DEVICE);
1274        lp->tx_ring[tx_index].buff_phy_addr =
1275            cpu_to_le32(lp->tx_dma_addr[tx_index]);
1276
1277        /*  Set FCS and LTINT bits */
1278        wmb();
1279        lp->tx_ring[tx_index].tx_flags |=
1280            cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1281
1282        lp->tx_idx++;
1283
1284        /* Trigger an immediate send poll. */
1285        writel(VAL1 | TDMD0, lp->mmio + CMD0);
1286        writel(VAL2 | RDMD0, lp->mmio + CMD0);
1287
1288        if (amd8111e_tx_queue_avail(lp) < 0) {
1289                netif_stop_queue(dev);
1290        }
1291        spin_unlock_irqrestore(&lp->lock, flags);
1292        return NETDEV_TX_OK;
1293}
1294/* This function returns all the memory mapped registers of the device. */
1295static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1296{
1297        void __iomem *mmio = lp->mmio;
1298        /* Read only necessary registers */
1299        buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1300        buf[1] = readl(mmio + XMT_RING_LEN0);
1301        buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1302        buf[3] = readl(mmio + RCV_RING_LEN0);
1303        buf[4] = readl(mmio + CMD0);
1304        buf[5] = readl(mmio + CMD2);
1305        buf[6] = readl(mmio + CMD3);
1306        buf[7] = readl(mmio + CMD7);
1307        buf[8] = readl(mmio + INT0);
1308        buf[9] = readl(mmio + INTEN0);
1309        buf[10] = readl(mmio + LADRF);
1310        buf[11] = readl(mmio + LADRF+4);
1311        buf[12] = readl(mmio + STAT0);
1312}
1313
1314
1315/* This function sets promiscuos mode, all-multi mode or the multicast address
1316 * list to the device.
1317 */
1318static void amd8111e_set_multicast_list(struct net_device *dev)
1319{
1320        struct netdev_hw_addr *ha;
1321        struct amd8111e_priv *lp = netdev_priv(dev);
1322        u32 mc_filter[2];
1323        int bit_num;
1324
1325        if (dev->flags & IFF_PROMISC) {
1326                writel(VAL2 | PROM, lp->mmio + CMD2);
1327                return;
1328        }
1329        else
1330                writel(PROM, lp->mmio + CMD2);
1331        if (dev->flags & IFF_ALLMULTI ||
1332            netdev_mc_count(dev) > MAX_FILTER_SIZE) {
1333                /* get all multicast packet */
1334                mc_filter[1] = mc_filter[0] = 0xffffffff;
1335                lp->options |= OPTION_MULTICAST_ENABLE;
1336                amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1337                return;
1338        }
1339        if (netdev_mc_empty(dev)) {
1340                /* get only own packets */
1341                mc_filter[1] = mc_filter[0] = 0;
1342                lp->options &= ~OPTION_MULTICAST_ENABLE;
1343                amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1344                /* disable promiscuous mode */
1345                writel(PROM, lp->mmio + CMD2);
1346                return;
1347        }
1348        /* load all the multicast addresses in the logic filter */
1349        lp->options |= OPTION_MULTICAST_ENABLE;
1350        mc_filter[1] = mc_filter[0] = 0;
1351        netdev_for_each_mc_addr(ha, dev) {
1352                bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
1353                mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1354        }
1355        amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1356
1357        /* To eliminate PCI posting bug */
1358        readl(lp->mmio + CMD2);
1359
1360}
1361
1362static void amd8111e_get_drvinfo(struct net_device *dev,
1363                                 struct ethtool_drvinfo *info)
1364{
1365        struct amd8111e_priv *lp = netdev_priv(dev);
1366        struct pci_dev *pci_dev = lp->pci_dev;
1367        strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
1368        snprintf(info->fw_version, sizeof(info->fw_version),
1369                "%u", chip_version);
1370        strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
1371}
1372
1373static int amd8111e_get_regs_len(struct net_device *dev)
1374{
1375        return AMD8111E_REG_DUMP_LEN;
1376}
1377
1378static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1379{
1380        struct amd8111e_priv *lp = netdev_priv(dev);
1381        regs->version = 0;
1382        amd8111e_read_regs(lp, buf);
1383}
1384
1385static int amd8111e_get_link_ksettings(struct net_device *dev,
1386                                       struct ethtool_link_ksettings *cmd)
1387{
1388        struct amd8111e_priv *lp = netdev_priv(dev);
1389        spin_lock_irq(&lp->lock);
1390        mii_ethtool_get_link_ksettings(&lp->mii_if, cmd);
1391        spin_unlock_irq(&lp->lock);
1392        return 0;
1393}
1394
1395static int amd8111e_set_link_ksettings(struct net_device *dev,
1396                                       const struct ethtool_link_ksettings *cmd)
1397{
1398        struct amd8111e_priv *lp = netdev_priv(dev);
1399        int res;
1400        spin_lock_irq(&lp->lock);
1401        res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd);
1402        spin_unlock_irq(&lp->lock);
1403        return res;
1404}
1405
1406static int amd8111e_nway_reset(struct net_device *dev)
1407{
1408        struct amd8111e_priv *lp = netdev_priv(dev);
1409        return mii_nway_restart(&lp->mii_if);
1410}
1411
1412static u32 amd8111e_get_link(struct net_device *dev)
1413{
1414        struct amd8111e_priv *lp = netdev_priv(dev);
1415        return mii_link_ok(&lp->mii_if);
1416}
1417
1418static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1419{
1420        struct amd8111e_priv *lp = netdev_priv(dev);
1421        wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1422        if (lp->options & OPTION_WOL_ENABLE)
1423                wol_info->wolopts = WAKE_MAGIC;
1424}
1425
1426static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1427{
1428        struct amd8111e_priv *lp = netdev_priv(dev);
1429        if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1430                return -EINVAL;
1431        spin_lock_irq(&lp->lock);
1432        if (wol_info->wolopts & WAKE_MAGIC)
1433                lp->options |=
1434                        (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1435        else if (wol_info->wolopts & WAKE_PHY)
1436                lp->options |=
1437                        (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1438        else
1439                lp->options &= ~OPTION_WOL_ENABLE;
1440        spin_unlock_irq(&lp->lock);
1441        return 0;
1442}
1443
1444static const struct ethtool_ops ops = {
1445        .get_drvinfo = amd8111e_get_drvinfo,
1446        .get_regs_len = amd8111e_get_regs_len,
1447        .get_regs = amd8111e_get_regs,
1448        .nway_reset = amd8111e_nway_reset,
1449        .get_link = amd8111e_get_link,
1450        .get_wol = amd8111e_get_wol,
1451        .set_wol = amd8111e_set_wol,
1452        .get_link_ksettings = amd8111e_get_link_ksettings,
1453        .set_link_ksettings = amd8111e_set_link_ksettings,
1454};
1455
1456/* This function handles all the  ethtool ioctls. It gives driver info,
1457 * gets/sets driver speed, gets memory mapped register values, forces
1458 * auto negotiation, sets/gets WOL options for ethtool application.
1459 */
1460static int amd8111e_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1461{
1462        struct mii_ioctl_data *data = if_mii(ifr);
1463        struct amd8111e_priv *lp = netdev_priv(dev);
1464        int err;
1465        u32 mii_regval;
1466
1467        switch (cmd) {
1468        case SIOCGMIIPHY:
1469                data->phy_id = lp->ext_phy_addr;
1470
1471                fallthrough;
1472        case SIOCGMIIREG:
1473
1474                spin_lock_irq(&lp->lock);
1475                err = amd8111e_read_phy(lp, data->phy_id,
1476                        data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1477                spin_unlock_irq(&lp->lock);
1478
1479                data->val_out = mii_regval;
1480                return err;
1481
1482        case SIOCSMIIREG:
1483
1484                spin_lock_irq(&lp->lock);
1485                err = amd8111e_write_phy(lp, data->phy_id,
1486                        data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1487                spin_unlock_irq(&lp->lock);
1488
1489                return err;
1490
1491        default:
1492                /* do nothing */
1493                break;
1494        }
1495        return -EOPNOTSUPP;
1496}
1497static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1498{
1499        struct amd8111e_priv *lp = netdev_priv(dev);
1500        int i;
1501        struct sockaddr *addr = p;
1502
1503        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1504        spin_lock_irq(&lp->lock);
1505        /* Setting the MAC address to the device */
1506        for (i = 0; i < ETH_ALEN; i++)
1507                writeb(dev->dev_addr[i], lp->mmio + PADR + i);
1508
1509        spin_unlock_irq(&lp->lock);
1510
1511        return 0;
1512}
1513
1514/* This function changes the mtu of the device. It restarts the device  to
1515 * initialize the descriptor with new receive buffers.
1516 */
1517static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1518{
1519        struct amd8111e_priv *lp = netdev_priv(dev);
1520        int err;
1521
1522        if (!netif_running(dev)) {
1523                /* new_mtu will be used
1524                 * when device starts netxt time
1525                 */
1526                dev->mtu = new_mtu;
1527                return 0;
1528        }
1529
1530        spin_lock_irq(&lp->lock);
1531
1532        /* stop the chip */
1533        writel(RUN, lp->mmio + CMD0);
1534
1535        dev->mtu = new_mtu;
1536
1537        err = amd8111e_restart(dev);
1538        spin_unlock_irq(&lp->lock);
1539        if (!err)
1540                netif_start_queue(dev);
1541        return err;
1542}
1543
1544static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
1545{
1546        writel(VAL1 | MPPLBA, lp->mmio + CMD3);
1547        writel(VAL0 | MPEN_SW, lp->mmio + CMD7);
1548
1549        /* To eliminate PCI posting bug */
1550        readl(lp->mmio + CMD7);
1551        return 0;
1552}
1553
1554static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
1555{
1556
1557        /* Adapter is already stoped/suspended/interrupt-disabled */
1558        writel(VAL0 | LCMODE_SW, lp->mmio + CMD7);
1559
1560        /* To eliminate PCI posting bug */
1561        readl(lp->mmio + CMD7);
1562        return 0;
1563}
1564
1565/* This function is called when a packet transmission fails to complete
1566 * within a reasonable period, on the assumption that an interrupt have
1567 * failed or the interface is locked up. This function will reinitialize
1568 * the hardware.
1569 */
1570static void amd8111e_tx_timeout(struct net_device *dev, unsigned int txqueue)
1571{
1572        struct amd8111e_priv *lp = netdev_priv(dev);
1573        int err;
1574
1575        netdev_err(dev, "transmit timed out, resetting\n");
1576
1577        spin_lock_irq(&lp->lock);
1578        err = amd8111e_restart(dev);
1579        spin_unlock_irq(&lp->lock);
1580        if (!err)
1581                netif_wake_queue(dev);
1582}
1583
1584static int __maybe_unused amd8111e_suspend(struct device *dev_d)
1585{
1586        struct net_device *dev = dev_get_drvdata(dev_d);
1587        struct amd8111e_priv *lp = netdev_priv(dev);
1588
1589        if (!netif_running(dev))
1590                return 0;
1591
1592        /* disable the interrupt */
1593        spin_lock_irq(&lp->lock);
1594        amd8111e_disable_interrupt(lp);
1595        spin_unlock_irq(&lp->lock);
1596
1597        netif_device_detach(dev);
1598
1599        /* stop chip */
1600        spin_lock_irq(&lp->lock);
1601        if (lp->options & OPTION_DYN_IPG_ENABLE)
1602                del_timer_sync(&lp->ipg_data.ipg_timer);
1603        amd8111e_stop_chip(lp);
1604        spin_unlock_irq(&lp->lock);
1605
1606        if (lp->options & OPTION_WOL_ENABLE) {
1607                 /* enable wol */
1608                if (lp->options & OPTION_WAKE_MAGIC_ENABLE)
1609                        amd8111e_enable_magicpkt(lp);
1610                if (lp->options & OPTION_WAKE_PHY_ENABLE)
1611                        amd8111e_enable_link_change(lp);
1612
1613                device_set_wakeup_enable(dev_d, 1);
1614
1615        } else {
1616                device_set_wakeup_enable(dev_d, 0);
1617        }
1618
1619        return 0;
1620}
1621
1622static int __maybe_unused amd8111e_resume(struct device *dev_d)
1623{
1624        struct net_device *dev = dev_get_drvdata(dev_d);
1625        struct amd8111e_priv *lp = netdev_priv(dev);
1626
1627        if (!netif_running(dev))
1628                return 0;
1629
1630        netif_device_attach(dev);
1631
1632        spin_lock_irq(&lp->lock);
1633        amd8111e_restart(dev);
1634        /* Restart ipg timer */
1635        if (lp->options & OPTION_DYN_IPG_ENABLE)
1636                mod_timer(&lp->ipg_data.ipg_timer,
1637                                jiffies + IPG_CONVERGE_JIFFIES);
1638        spin_unlock_irq(&lp->lock);
1639
1640        return 0;
1641}
1642
1643static void amd8111e_config_ipg(struct timer_list *t)
1644{
1645        struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer);
1646        struct ipg_info *ipg_data = &lp->ipg_data;
1647        void __iomem *mmio = lp->mmio;
1648        unsigned int prev_col_cnt = ipg_data->col_cnt;
1649        unsigned int total_col_cnt;
1650        unsigned int tmp_ipg;
1651
1652        if (lp->link_config.duplex == DUPLEX_FULL) {
1653                ipg_data->ipg = DEFAULT_IPG;
1654                return;
1655        }
1656
1657        if (ipg_data->ipg_state == SSTATE) {
1658
1659                if (ipg_data->timer_tick == IPG_STABLE_TIME) {
1660
1661                        ipg_data->timer_tick = 0;
1662                        ipg_data->ipg = MIN_IPG - IPG_STEP;
1663                        ipg_data->current_ipg = MIN_IPG;
1664                        ipg_data->diff_col_cnt = 0xFFFFFFFF;
1665                        ipg_data->ipg_state = CSTATE;
1666                }
1667                else
1668                        ipg_data->timer_tick++;
1669        }
1670
1671        if (ipg_data->ipg_state == CSTATE) {
1672
1673                /* Get the current collision count */
1674
1675                total_col_cnt = ipg_data->col_cnt =
1676                                amd8111e_read_mib(mmio, xmt_collisions);
1677
1678                if ((total_col_cnt - prev_col_cnt) <
1679                                (ipg_data->diff_col_cnt)) {
1680
1681                        ipg_data->diff_col_cnt =
1682                                total_col_cnt - prev_col_cnt;
1683
1684                        ipg_data->ipg = ipg_data->current_ipg;
1685                }
1686
1687                ipg_data->current_ipg += IPG_STEP;
1688
1689                if (ipg_data->current_ipg <= MAX_IPG)
1690                        tmp_ipg = ipg_data->current_ipg;
1691                else {
1692                        tmp_ipg = ipg_data->ipg;
1693                        ipg_data->ipg_state = SSTATE;
1694                }
1695                writew((u32)tmp_ipg, mmio + IPG);
1696                writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1697        }
1698        mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1699        return;
1700
1701}
1702
1703static void amd8111e_probe_ext_phy(struct net_device *dev)
1704{
1705        struct amd8111e_priv *lp = netdev_priv(dev);
1706        int i;
1707
1708        for (i = 0x1e; i >= 0; i--) {
1709                u32 id1, id2;
1710
1711                if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1712                        continue;
1713                if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1714                        continue;
1715                lp->ext_phy_id = (id1 << 16) | id2;
1716                lp->ext_phy_addr = i;
1717                return;
1718        }
1719        lp->ext_phy_id = 0;
1720        lp->ext_phy_addr = 1;
1721}
1722
1723static const struct net_device_ops amd8111e_netdev_ops = {
1724        .ndo_open               = amd8111e_open,
1725        .ndo_stop               = amd8111e_close,
1726        .ndo_start_xmit         = amd8111e_start_xmit,
1727        .ndo_tx_timeout         = amd8111e_tx_timeout,
1728        .ndo_get_stats          = amd8111e_get_stats,
1729        .ndo_set_rx_mode        = amd8111e_set_multicast_list,
1730        .ndo_validate_addr      = eth_validate_addr,
1731        .ndo_set_mac_address    = amd8111e_set_mac_address,
1732        .ndo_eth_ioctl          = amd8111e_ioctl,
1733        .ndo_change_mtu         = amd8111e_change_mtu,
1734#ifdef CONFIG_NET_POLL_CONTROLLER
1735        .ndo_poll_controller     = amd8111e_poll,
1736#endif
1737};
1738
1739static int amd8111e_probe_one(struct pci_dev *pdev,
1740                                  const struct pci_device_id *ent)
1741{
1742        int err, i;
1743        unsigned long reg_addr, reg_len;
1744        struct amd8111e_priv *lp;
1745        struct net_device *dev;
1746
1747        err = pci_enable_device(pdev);
1748        if (err) {
1749                dev_err(&pdev->dev, "Cannot enable new PCI device\n");
1750                return err;
1751        }
1752
1753        if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
1754                dev_err(&pdev->dev, "Cannot find PCI base address\n");
1755                err = -ENODEV;
1756                goto err_disable_pdev;
1757        }
1758
1759        err = pci_request_regions(pdev, MODULE_NAME);
1760        if (err) {
1761                dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
1762                goto err_disable_pdev;
1763        }
1764
1765        pci_set_master(pdev);
1766
1767        /* Find power-management capability. */
1768        if (!pdev->pm_cap) {
1769                dev_err(&pdev->dev, "No Power Management capability\n");
1770                err = -ENODEV;
1771                goto err_free_reg;
1772        }
1773
1774        /* Initialize DMA */
1775        if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) < 0) {
1776                dev_err(&pdev->dev, "DMA not supported\n");
1777                err = -ENODEV;
1778                goto err_free_reg;
1779        }
1780
1781        reg_addr = pci_resource_start(pdev, 0);
1782        reg_len = pci_resource_len(pdev, 0);
1783
1784        dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1785        if (!dev) {
1786                err = -ENOMEM;
1787                goto err_free_reg;
1788        }
1789
1790        SET_NETDEV_DEV(dev, &pdev->dev);
1791
1792#if AMD8111E_VLAN_TAG_USED
1793        dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
1794#endif
1795
1796        lp = netdev_priv(dev);
1797        lp->pci_dev = pdev;
1798        lp->amd8111e_net_dev = dev;
1799        lp->pm_cap = pdev->pm_cap;
1800
1801        spin_lock_init(&lp->lock);
1802
1803        lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
1804        if (!lp->mmio) {
1805                dev_err(&pdev->dev, "Cannot map device registers\n");
1806                err = -ENOMEM;
1807                goto err_free_dev;
1808        }
1809
1810        /* Initializing MAC address */
1811        for (i = 0; i < ETH_ALEN; i++)
1812                dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1813
1814        /* Setting user defined parametrs */
1815        lp->ext_phy_option = speed_duplex[card_idx];
1816        if (coalesce[card_idx])
1817                lp->options |= OPTION_INTR_COAL_ENABLE;
1818        if (dynamic_ipg[card_idx++])
1819                lp->options |= OPTION_DYN_IPG_ENABLE;
1820
1821
1822        /* Initialize driver entry points */
1823        dev->netdev_ops = &amd8111e_netdev_ops;
1824        dev->ethtool_ops = &ops;
1825        dev->irq = pdev->irq;
1826        dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1827        dev->min_mtu = AMD8111E_MIN_MTU;
1828        dev->max_mtu = AMD8111E_MAX_MTU;
1829        netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1830
1831#if AMD8111E_VLAN_TAG_USED
1832        dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
1833#endif
1834        /* Probe the external PHY */
1835        amd8111e_probe_ext_phy(dev);
1836
1837        /* setting mii default values */
1838        lp->mii_if.dev = dev;
1839        lp->mii_if.mdio_read = amd8111e_mdio_read;
1840        lp->mii_if.mdio_write = amd8111e_mdio_write;
1841        lp->mii_if.phy_id = lp->ext_phy_addr;
1842
1843        /* Set receive buffer length and set jumbo option*/
1844        amd8111e_set_rx_buff_len(dev);
1845
1846
1847        err = register_netdev(dev);
1848        if (err) {
1849                dev_err(&pdev->dev, "Cannot register net device\n");
1850                goto err_free_dev;
1851        }
1852
1853        pci_set_drvdata(pdev, dev);
1854
1855        /* Initialize software ipg timer */
1856        if (lp->options & OPTION_DYN_IPG_ENABLE) {
1857                timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0);
1858                lp->ipg_data.ipg_timer.expires = jiffies +
1859                                                 IPG_CONVERGE_JIFFIES;
1860                lp->ipg_data.ipg = DEFAULT_IPG;
1861                lp->ipg_data.ipg_state = CSTATE;
1862        }
1863
1864        /*  display driver and device information */
1865        chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000) >> 28;
1866        dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1867                 chip_version, dev->dev_addr);
1868        if (lp->ext_phy_id)
1869                dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
1870                         lp->ext_phy_id, lp->ext_phy_addr);
1871        else
1872                dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
1873
1874        return 0;
1875
1876err_free_dev:
1877        free_netdev(dev);
1878
1879err_free_reg:
1880        pci_release_regions(pdev);
1881
1882err_disable_pdev:
1883        pci_disable_device(pdev);
1884        return err;
1885
1886}
1887
1888static void amd8111e_remove_one(struct pci_dev *pdev)
1889{
1890        struct net_device *dev = pci_get_drvdata(pdev);
1891
1892        if (dev) {
1893                unregister_netdev(dev);
1894                free_netdev(dev);
1895                pci_release_regions(pdev);
1896                pci_disable_device(pdev);
1897        }
1898}
1899
1900static const struct pci_device_id amd8111e_pci_tbl[] = {
1901        {
1902         .vendor = PCI_VENDOR_ID_AMD,
1903         .device = PCI_DEVICE_ID_AMD8111E_7462,
1904        },
1905        {
1906         .vendor = 0,
1907        }
1908};
1909MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
1910
1911static SIMPLE_DEV_PM_OPS(amd8111e_pm_ops, amd8111e_suspend, amd8111e_resume);
1912
1913static struct pci_driver amd8111e_driver = {
1914        .name           = MODULE_NAME,
1915        .id_table       = amd8111e_pci_tbl,
1916        .probe          = amd8111e_probe_one,
1917        .remove         = amd8111e_remove_one,
1918        .driver.pm      = &amd8111e_pm_ops
1919};
1920
1921module_pci_driver(amd8111e_driver);
1922