1/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ 2/* Copyright 2013-2016 Freescale Semiconductor Inc. 3 * Copyright 2016 NXP 4 * Copyright 2020 NXP 5 */ 6#ifndef __FSL_DPNI_H 7#define __FSL_DPNI_H 8 9#include "dpkg.h" 10 11struct fsl_mc_io; 12 13/* Data Path Network Interface API 14 * Contains initialization APIs and runtime control APIs for DPNI 15 */ 16 17/** General DPNI macros */ 18 19/** 20 * DPNI_MAX_TC - Maximum number of traffic classes 21 */ 22#define DPNI_MAX_TC 8 23/** 24 * DPNI_MAX_DPBP - Maximum number of buffer pools per DPNI 25 */ 26#define DPNI_MAX_DPBP 8 27 28/** 29 * DPNI_ALL_TCS - All traffic classes considered; see dpni_set_queue() 30 */ 31#define DPNI_ALL_TCS (u8)(-1) 32/** 33 * DPNI_ALL_TC_FLOWS - All flows within traffic class considered; see 34 * dpni_set_queue() 35 */ 36#define DPNI_ALL_TC_FLOWS (u16)(-1) 37/** 38 * DPNI_NEW_FLOW_ID - Generate new flow ID; see dpni_set_queue() 39 */ 40#define DPNI_NEW_FLOW_ID (u16)(-1) 41 42/** 43 * DPNI_OPT_TX_FRM_RELEASE - Tx traffic is always released to a buffer pool on 44 * transmit, there are no resources allocated to have the frames confirmed back 45 * to the source after transmission. 46 */ 47#define DPNI_OPT_TX_FRM_RELEASE 0x000001 48/** 49 * DPNI_OPT_NO_MAC_FILTER - Disables support for MAC address filtering for 50 * addresses other than primary MAC address. This affects both unicast and 51 * multicast. Promiscuous mode can still be enabled/disabled for both unicast 52 * and multicast. If promiscuous mode is disabled, only traffic matching the 53 * primary MAC address will be accepted. 54 */ 55#define DPNI_OPT_NO_MAC_FILTER 0x000002 56/** 57 * DPNI_OPT_HAS_POLICING - Allocate policers for this DPNI. They can be used to 58 * rate-limit traffic per traffic class (TC) basis. 59 */ 60#define DPNI_OPT_HAS_POLICING 0x000004 61/** 62 * DPNI_OPT_SHARED_CONGESTION - Congestion can be managed in several ways, 63 * allowing the buffer pool to deplete on ingress, taildrop on each queue or 64 * use congestion groups for sets of queues. If set, it configures a single 65 * congestion groups across all TCs. If reset, a congestion group is allocated 66 * for each TC. Only relevant if the DPNI has multiple traffic classes. 67 */ 68#define DPNI_OPT_SHARED_CONGESTION 0x000008 69/** 70 * DPNI_OPT_HAS_KEY_MASKING - Enables TCAM for Flow Steering and QoS look-ups. 71 * If not specified, all look-ups are exact match. Note that TCAM is not 72 * available on LS1088 and its variants. Setting this bit on these SoCs will 73 * trigger an error. 74 */ 75#define DPNI_OPT_HAS_KEY_MASKING 0x000010 76/** 77 * DPNI_OPT_NO_FS - Disables the flow steering table. 78 */ 79#define DPNI_OPT_NO_FS 0x000020 80/** 81 * DPNI_OPT_SHARED_FS - Flow steering table is shared between all traffic 82 * classes 83 */ 84#define DPNI_OPT_SHARED_FS 0x001000 85 86int dpni_open(struct fsl_mc_io *mc_io, 87 u32 cmd_flags, 88 int dpni_id, 89 u16 *token); 90 91int dpni_close(struct fsl_mc_io *mc_io, 92 u32 cmd_flags, 93 u16 token); 94 95/** 96 * struct dpni_pools_cfg - Structure representing buffer pools configuration 97 * @num_dpbp: Number of DPBPs 98 * @pools: Array of buffer pools parameters; The number of valid entries 99 * must match 'num_dpbp' value 100 * @pools.dpbp_id: DPBP object ID 101 * @pools.buffer_size: Buffer size 102 * @pools.backup_pool: Backup pool 103 */ 104struct dpni_pools_cfg { 105 u8 num_dpbp; 106 struct { 107 int dpbp_id; 108 u16 buffer_size; 109 int backup_pool; 110 } pools[DPNI_MAX_DPBP]; 111}; 112 113int dpni_set_pools(struct fsl_mc_io *mc_io, 114 u32 cmd_flags, 115 u16 token, 116 const struct dpni_pools_cfg *cfg); 117 118int dpni_enable(struct fsl_mc_io *mc_io, 119 u32 cmd_flags, 120 u16 token); 121 122int dpni_disable(struct fsl_mc_io *mc_io, 123 u32 cmd_flags, 124 u16 token); 125 126int dpni_is_enabled(struct fsl_mc_io *mc_io, 127 u32 cmd_flags, 128 u16 token, 129 int *en); 130 131int dpni_reset(struct fsl_mc_io *mc_io, 132 u32 cmd_flags, 133 u16 token); 134 135/* DPNI IRQ Index and Events */ 136 137#define DPNI_IRQ_INDEX 0 138 139/* DPNI_IRQ_EVENT_LINK_CHANGED - indicates a change in link state */ 140#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 141 142/* DPNI_IRQ_EVENT_ENDPOINT_CHANGED - indicates a change in endpoint */ 143#define DPNI_IRQ_EVENT_ENDPOINT_CHANGED 0x00000002 144 145int dpni_set_irq_enable(struct fsl_mc_io *mc_io, 146 u32 cmd_flags, 147 u16 token, 148 u8 irq_index, 149 u8 en); 150 151int dpni_get_irq_enable(struct fsl_mc_io *mc_io, 152 u32 cmd_flags, 153 u16 token, 154 u8 irq_index, 155 u8 *en); 156 157int dpni_set_irq_mask(struct fsl_mc_io *mc_io, 158 u32 cmd_flags, 159 u16 token, 160 u8 irq_index, 161 u32 mask); 162 163int dpni_get_irq_mask(struct fsl_mc_io *mc_io, 164 u32 cmd_flags, 165 u16 token, 166 u8 irq_index, 167 u32 *mask); 168 169int dpni_get_irq_status(struct fsl_mc_io *mc_io, 170 u32 cmd_flags, 171 u16 token, 172 u8 irq_index, 173 u32 *status); 174 175int dpni_clear_irq_status(struct fsl_mc_io *mc_io, 176 u32 cmd_flags, 177 u16 token, 178 u8 irq_index, 179 u32 status); 180 181/** 182 * struct dpni_attr - Structure representing DPNI attributes 183 * @options: Any combination of the following options: 184 * DPNI_OPT_TX_FRM_RELEASE 185 * DPNI_OPT_NO_MAC_FILTER 186 * DPNI_OPT_HAS_POLICING 187 * DPNI_OPT_SHARED_CONGESTION 188 * DPNI_OPT_HAS_KEY_MASKING 189 * DPNI_OPT_NO_FS 190 * @num_queues: Number of Tx and Rx queues used for traffic distribution. 191 * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI. 192 * @mac_filter_entries: Number of entries in the MAC address filtering table. 193 * @vlan_filter_entries: Number of entries in the VLAN address filtering table. 194 * @qos_entries: Number of entries in the QoS classification table. 195 * @fs_entries: Number of entries in the flow steering table. 196 * @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger 197 * than this when adding QoS entries will result in an error. 198 * @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a 199 * key larger than this when composing the hash + FS key will 200 * result in an error. 201 * @wriop_version: Version of WRIOP HW block. The 3 version values are stored 202 * on 6, 5, 5 bits respectively. 203 */ 204struct dpni_attr { 205 u32 options; 206 u8 num_queues; 207 u8 num_tcs; 208 u8 mac_filter_entries; 209 u8 vlan_filter_entries; 210 u8 qos_entries; 211 u16 fs_entries; 212 u8 qos_key_size; 213 u8 fs_key_size; 214 u16 wriop_version; 215}; 216 217int dpni_get_attributes(struct fsl_mc_io *mc_io, 218 u32 cmd_flags, 219 u16 token, 220 struct dpni_attr *attr); 221 222/* DPNI errors */ 223 224/** 225 * DPNI_ERROR_EOFHE - Extract out of frame header error 226 */ 227#define DPNI_ERROR_EOFHE 0x00020000 228/** 229 * DPNI_ERROR_FLE - Frame length error 230 */ 231#define DPNI_ERROR_FLE 0x00002000 232/** 233 * DPNI_ERROR_FPE - Frame physical error 234 */ 235#define DPNI_ERROR_FPE 0x00001000 236/** 237 * DPNI_ERROR_PHE - Parsing header error 238 */ 239#define DPNI_ERROR_PHE 0x00000020 240/** 241 * DPNI_ERROR_L3CE - Parser L3 checksum error 242 */ 243#define DPNI_ERROR_L3CE 0x00000004 244/** 245 * DPNI_ERROR_L4CE - Parser L3 checksum error 246 */ 247#define DPNI_ERROR_L4CE 0x00000001 248 249/** 250 * enum dpni_error_action - Defines DPNI behavior for errors 251 * @DPNI_ERROR_ACTION_DISCARD: Discard the frame 252 * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow 253 * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue 254 */ 255enum dpni_error_action { 256 DPNI_ERROR_ACTION_DISCARD = 0, 257 DPNI_ERROR_ACTION_CONTINUE = 1, 258 DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2 259}; 260 261/** 262 * struct dpni_error_cfg - Structure representing DPNI errors treatment 263 * @errors: Errors mask; use 'DPNI_ERROR__<X> 264 * @error_action: The desired action for the errors mask 265 * @set_frame_annotation: Set to '1' to mark the errors in frame annotation 266 * status (FAS); relevant only for the non-discard action 267 */ 268struct dpni_error_cfg { 269 u32 errors; 270 enum dpni_error_action error_action; 271 int set_frame_annotation; 272}; 273 274int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, 275 u32 cmd_flags, 276 u16 token, 277 struct dpni_error_cfg *cfg); 278 279/* DPNI buffer layout modification options */ 280 281/** 282 * DPNI_BUF_LAYOUT_OPT_TIMESTAMP - Select to modify the time-stamp setting 283 */ 284#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 285/** 286 * DPNI_BUF_LAYOUT_OPT_PARSER_RESULT - Select to modify the parser-result 287 * setting; not applicable for Tx 288 */ 289#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 290/** 291 * DPNI_BUF_LAYOUT_OPT_FRAME_STATUS - Select to modify the frame-status setting 292 */ 293#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 294/** 295 * DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE - Select to modify the private-data-size setting 296 */ 297#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 298/** 299 * DPNI_BUF_LAYOUT_OPT_DATA_ALIGN - Select to modify the data-alignment setting 300 */ 301#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 302/** 303 * DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM - Select to modify the data-head-room setting 304 */ 305#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 306/** 307 * DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM - Select to modify the data-tail-room setting 308 */ 309#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 310 311/** 312 * struct dpni_buffer_layout - Structure representing DPNI buffer layout 313 * @options: Flags representing the suggested modifications to the buffer 314 * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags 315 * @pass_timestamp: Pass timestamp value 316 * @pass_parser_result: Pass parser results 317 * @pass_frame_status: Pass frame status 318 * @private_data_size: Size kept for private data (in bytes) 319 * @data_align: Data alignment 320 * @data_head_room: Data head room 321 * @data_tail_room: Data tail room 322 */ 323struct dpni_buffer_layout { 324 u32 options; 325 int pass_timestamp; 326 int pass_parser_result; 327 int pass_frame_status; 328 u16 private_data_size; 329 u16 data_align; 330 u16 data_head_room; 331 u16 data_tail_room; 332}; 333 334/** 335 * enum dpni_queue_type - Identifies a type of queue targeted by the command 336 * @DPNI_QUEUE_RX: Rx queue 337 * @DPNI_QUEUE_TX: Tx queue 338 * @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue 339 * @DPNI_QUEUE_RX_ERR: Rx error queue 340 */ 341enum dpni_queue_type { 342 DPNI_QUEUE_RX, 343 DPNI_QUEUE_TX, 344 DPNI_QUEUE_TX_CONFIRM, 345 DPNI_QUEUE_RX_ERR, 346}; 347 348int dpni_get_buffer_layout(struct fsl_mc_io *mc_io, 349 u32 cmd_flags, 350 u16 token, 351 enum dpni_queue_type qtype, 352 struct dpni_buffer_layout *layout); 353 354int dpni_set_buffer_layout(struct fsl_mc_io *mc_io, 355 u32 cmd_flags, 356 u16 token, 357 enum dpni_queue_type qtype, 358 const struct dpni_buffer_layout *layout); 359 360/** 361 * enum dpni_offload - Identifies a type of offload targeted by the command 362 * @DPNI_OFF_RX_L3_CSUM: Rx L3 checksum validation 363 * @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation 364 * @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation 365 * @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation 366 */ 367enum dpni_offload { 368 DPNI_OFF_RX_L3_CSUM, 369 DPNI_OFF_RX_L4_CSUM, 370 DPNI_OFF_TX_L3_CSUM, 371 DPNI_OFF_TX_L4_CSUM, 372}; 373 374int dpni_set_offload(struct fsl_mc_io *mc_io, 375 u32 cmd_flags, 376 u16 token, 377 enum dpni_offload type, 378 u32 config); 379 380int dpni_get_offload(struct fsl_mc_io *mc_io, 381 u32 cmd_flags, 382 u16 token, 383 enum dpni_offload type, 384 u32 *config); 385 386int dpni_get_qdid(struct fsl_mc_io *mc_io, 387 u32 cmd_flags, 388 u16 token, 389 enum dpni_queue_type qtype, 390 u16 *qdid); 391 392int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, 393 u32 cmd_flags, 394 u16 token, 395 u16 *data_offset); 396 397#define DPNI_STATISTICS_CNT 7 398 399/** 400 * union dpni_statistics - Union describing the DPNI statistics 401 * @page_0: Page_0 statistics structure 402 * @page_0.ingress_all_frames: Ingress frame count 403 * @page_0.ingress_all_bytes: Ingress byte count 404 * @page_0.ingress_multicast_frames: Ingress multicast frame count 405 * @page_0.ingress_multicast_bytes: Ingress multicast byte count 406 * @page_0.ingress_broadcast_frames: Ingress broadcast frame count 407 * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count 408 * @page_1: Page_1 statistics structure 409 * @page_1.egress_all_frames: Egress frame count 410 * @page_1.egress_all_bytes: Egress byte count 411 * @page_1.egress_multicast_frames: Egress multicast frame count 412 * @page_1.egress_multicast_bytes: Egress multicast byte count 413 * @page_1.egress_broadcast_frames: Egress broadcast frame count 414 * @page_1.egress_broadcast_bytes: Egress broadcast byte count 415 * @page_2: Page_2 statistics structure 416 * @page_2.ingress_filtered_frames: Ingress filtered frame count 417 * @page_2.ingress_discarded_frames: Ingress discarded frame count 418 * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to 419 * lack of buffers 420 * @page_2.egress_discarded_frames: Egress discarded frame count 421 * @page_2.egress_confirmed_frames: Egress confirmed frame count 422 * @page_3: Page_3 statistics structure 423 * @page_3.egress_dequeue_bytes: Cumulative count of the number of bytes 424 * dequeued from egress FQs 425 * @page_3.egress_dequeue_frames: Cumulative count of the number of frames 426 * dequeued from egress FQs 427 * @page_3.egress_reject_bytes: Cumulative count of the number of bytes in 428 * egress frames whose enqueue was rejected 429 * @page_3.egress_reject_frames: Cumulative count of the number of egress 430 * frames whose enqueue was rejected 431 * @page_4: Page_4 statistics structure: congestion points 432 * @page_4.cgr_reject_frames: number of rejected frames due to congestion point 433 * @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point 434 * @page_5: Page_5 statistics structure: policer 435 * @page_5.policer_cnt_red: NUmber of red colored frames 436 * @page_5.policer_cnt_yellow: number of yellow colored frames 437 * @page_5.policer_cnt_green: number of green colored frames 438 * @page_5.policer_cnt_re_red: number of recolored red frames 439 * @page_5.policer_cnt_re_yellow: number of recolored yellow frames 440 * @page_6: Page_6 statistics structure 441 * @page_6.tx_pending_frames: total number of frames pending in egress FQs 442 * @raw: raw statistics structure, used to index counters 443 */ 444union dpni_statistics { 445 struct { 446 u64 ingress_all_frames; 447 u64 ingress_all_bytes; 448 u64 ingress_multicast_frames; 449 u64 ingress_multicast_bytes; 450 u64 ingress_broadcast_frames; 451 u64 ingress_broadcast_bytes; 452 } page_0; 453 struct { 454 u64 egress_all_frames; 455 u64 egress_all_bytes; 456 u64 egress_multicast_frames; 457 u64 egress_multicast_bytes; 458 u64 egress_broadcast_frames; 459 u64 egress_broadcast_bytes; 460 } page_1; 461 struct { 462 u64 ingress_filtered_frames; 463 u64 ingress_discarded_frames; 464 u64 ingress_nobuffer_discards; 465 u64 egress_discarded_frames; 466 u64 egress_confirmed_frames; 467 } page_2; 468 struct { 469 u64 egress_dequeue_bytes; 470 u64 egress_dequeue_frames; 471 u64 egress_reject_bytes; 472 u64 egress_reject_frames; 473 } page_3; 474 struct { 475 u64 cgr_reject_frames; 476 u64 cgr_reject_bytes; 477 } page_4; 478 struct { 479 u64 policer_cnt_red; 480 u64 policer_cnt_yellow; 481 u64 policer_cnt_green; 482 u64 policer_cnt_re_red; 483 u64 policer_cnt_re_yellow; 484 } page_5; 485 struct { 486 u64 tx_pending_frames; 487 } page_6; 488 struct { 489 u64 counter[DPNI_STATISTICS_CNT]; 490 } raw; 491}; 492 493int dpni_get_statistics(struct fsl_mc_io *mc_io, 494 u32 cmd_flags, 495 u16 token, 496 u8 page, 497 union dpni_statistics *stat); 498 499#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL 500#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL 501#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL 502#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL 503#define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL 504 505/** 506 * struct dpni_link_cfg - Structure representing DPNI link configuration 507 * @rate: Rate 508 * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values 509 */ 510struct dpni_link_cfg { 511 u32 rate; 512 u64 options; 513}; 514 515int dpni_set_link_cfg(struct fsl_mc_io *mc_io, 516 u32 cmd_flags, 517 u16 token, 518 const struct dpni_link_cfg *cfg); 519 520int dpni_get_link_cfg(struct fsl_mc_io *mc_io, 521 u32 cmd_flags, 522 u16 token, 523 struct dpni_link_cfg *cfg); 524 525/** 526 * struct dpni_link_state - Structure representing DPNI link state 527 * @rate: Rate 528 * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values 529 * @up: Link state; '0' for down, '1' for up 530 */ 531struct dpni_link_state { 532 u32 rate; 533 u64 options; 534 int up; 535}; 536 537int dpni_get_link_state(struct fsl_mc_io *mc_io, 538 u32 cmd_flags, 539 u16 token, 540 struct dpni_link_state *state); 541 542int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, 543 u32 cmd_flags, 544 u16 token, 545 u16 max_frame_length); 546 547int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, 548 u32 cmd_flags, 549 u16 token, 550 u16 *max_frame_length); 551 552int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, 553 u32 cmd_flags, 554 u16 token, 555 int en); 556 557int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, 558 u32 cmd_flags, 559 u16 token, 560 int *en); 561 562int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, 563 u32 cmd_flags, 564 u16 token, 565 int en); 566 567int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, 568 u32 cmd_flags, 569 u16 token, 570 int *en); 571 572int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, 573 u32 cmd_flags, 574 u16 token, 575 const u8 mac_addr[6]); 576 577int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, 578 u32 cmd_flags, 579 u16 token, 580 u8 mac_addr[6]); 581 582int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io, 583 u32 cm_flags, 584 u16 token, 585 u8 mac_addr[6]); 586 587int dpni_add_mac_addr(struct fsl_mc_io *mc_io, 588 u32 cmd_flags, 589 u16 token, 590 const u8 mac_addr[6]); 591 592int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, 593 u32 cmd_flags, 594 u16 token, 595 const u8 mac_addr[6]); 596 597int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, 598 u32 cmd_flags, 599 u16 token, 600 int unicast, 601 int multicast); 602 603/** 604 * enum dpni_dist_mode - DPNI distribution mode 605 * @DPNI_DIST_MODE_NONE: No distribution 606 * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if 607 * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation 608 * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if 609 * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation 610 */ 611enum dpni_dist_mode { 612 DPNI_DIST_MODE_NONE = 0, 613 DPNI_DIST_MODE_HASH = 1, 614 DPNI_DIST_MODE_FS = 2 615}; 616 617/** 618 * enum dpni_fs_miss_action - DPNI Flow Steering miss action 619 * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame 620 * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id 621 * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash 622 */ 623enum dpni_fs_miss_action { 624 DPNI_FS_MISS_DROP = 0, 625 DPNI_FS_MISS_EXPLICIT_FLOWID = 1, 626 DPNI_FS_MISS_HASH = 2 627}; 628 629/** 630 * struct dpni_fs_tbl_cfg - Flow Steering table configuration 631 * @miss_action: Miss action selection 632 * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID' 633 */ 634struct dpni_fs_tbl_cfg { 635 enum dpni_fs_miss_action miss_action; 636 u16 default_flow_id; 637}; 638 639int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, 640 u8 *key_cfg_buf); 641 642/** 643 * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration 644 * @dist_size: Set the distribution size; 645 * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, 646 * 112,128,192,224,256,384,448,512,768,896,1024 647 * @dist_mode: Distribution mode 648 * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with 649 * the extractions to be used for the distribution key by calling 650 * dpni_prepare_key_cfg() relevant only when 651 * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0' 652 * @fs_cfg: Flow Steering table configuration; only relevant if 653 * 'dist_mode = DPNI_DIST_MODE_FS' 654 */ 655struct dpni_rx_tc_dist_cfg { 656 u16 dist_size; 657 enum dpni_dist_mode dist_mode; 658 u64 key_cfg_iova; 659 struct dpni_fs_tbl_cfg fs_cfg; 660}; 661 662int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, 663 u32 cmd_flags, 664 u16 token, 665 u8 tc_id, 666 const struct dpni_rx_tc_dist_cfg *cfg); 667 668/** 669 * DPNI_FS_MISS_DROP - When used for fs_miss_flow_id in function 670 * dpni_set_rx_dist, will signal to dpni to drop all unclassified frames 671 */ 672#define DPNI_FS_MISS_DROP ((uint16_t)-1) 673 674/** 675 * struct dpni_rx_dist_cfg - Rx distribution configuration 676 * @dist_size: distribution size 677 * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with 678 * the extractions to be used for the distribution key by calling 679 * dpni_prepare_key_cfg(); relevant only when enable!=0 otherwise 680 * it can be '0' 681 * @enable: enable/disable the distribution. 682 * @tc: TC id for which distribution is set 683 * @fs_miss_flow_id: when packet misses all rules from flow steering table and 684 * hash is disabled it will be put into this queue id; use 685 * DPNI_FS_MISS_DROP to drop frames. The value of this field is 686 * used only when flow steering distribution is enabled and hash 687 * distribution is disabled 688 */ 689struct dpni_rx_dist_cfg { 690 u16 dist_size; 691 u64 key_cfg_iova; 692 u8 enable; 693 u8 tc; 694 u16 fs_miss_flow_id; 695}; 696 697int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, 698 u32 cmd_flags, 699 u16 token, 700 const struct dpni_rx_dist_cfg *cfg); 701 702int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, 703 u32 cmd_flags, 704 u16 token, 705 const struct dpni_rx_dist_cfg *cfg); 706 707/** 708 * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration 709 * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with 710 * key extractions to be used as the QoS criteria by calling 711 * dpkg_prepare_key_cfg() 712 * @discard_on_miss: Set to '1' to discard frames in case of no match (miss); 713 * '0' to use the 'default_tc' in such cases 714 * @default_tc: Used in case of no-match and 'discard_on_miss'= 0 715 */ 716struct dpni_qos_tbl_cfg { 717 u64 key_cfg_iova; 718 int discard_on_miss; 719 u8 default_tc; 720}; 721 722int dpni_set_qos_table(struct fsl_mc_io *mc_io, 723 u32 cmd_flags, 724 u16 token, 725 const struct dpni_qos_tbl_cfg *cfg); 726 727/** 728 * enum dpni_dest - DPNI destination types 729 * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and 730 * does not generate FQDAN notifications; user is expected to 731 * dequeue from the queue based on polling or other user-defined 732 * method 733 * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN 734 * notifications to the specified DPIO; user is expected to dequeue 735 * from the queue only after notification is received 736 * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate 737 * FQDAN notifications, but is connected to the specified DPCON 738 * object; user is expected to dequeue from the DPCON channel 739 */ 740enum dpni_dest { 741 DPNI_DEST_NONE = 0, 742 DPNI_DEST_DPIO = 1, 743 DPNI_DEST_DPCON = 2 744}; 745 746/** 747 * struct dpni_queue - Queue structure 748 * @destination: - Destination structure 749 * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0. 750 * Identifies either a DPIO or a DPCON object. 751 * Not relevant for Tx queues. 752 * @destination.type: May be one of the following: 753 * 0 - No destination, queue can be manually 754 * queried, but will not push traffic or 755 * notifications to a DPIO; 756 * 1 - The destination is a DPIO. When traffic 757 * becomes available in the queue a FQDAN 758 * (FQ data available notification) will be 759 * generated to selected DPIO; 760 * 2 - The destination is a DPCON. The queue is 761 * associated with a DPCON object for the 762 * purpose of scheduling between multiple 763 * queues. The DPCON may be independently 764 * configured to generate notifications. 765 * Not relevant for Tx queues. 766 * @destination.hold_active: Hold active, maintains a queue scheduled for longer 767 * in a DPIO during dequeue to reduce spread of traffic. 768 * Only relevant if queues are 769 * not affined to a single DPIO. 770 * @user_context: User data, presented to the user along with any frames 771 * from this queue. Not relevant for Tx queues. 772 * @flc: FD FLow Context structure 773 * @flc.value: Default FLC value for traffic dequeued from 774 * this queue. Please check description of FD 775 * structure for more information. 776 * Note that FLC values set using dpni_add_fs_entry, 777 * if any, take precedence over values per queue. 778 * @flc.stash_control: Boolean, indicates whether the 6 lowest 779 * - significant bits are used for stash control. 780 * significant bits are used for stash control. If set, the 6 781 * least significant bits in value are interpreted as follows: 782 * - bits 0-1: indicates the number of 64 byte units of context 783 * that are stashed. FLC value is interpreted as a memory address 784 * in this case, excluding the 6 LS bits. 785 * - bits 2-3: indicates the number of 64 byte units of frame 786 * annotation to be stashed. Annotation is placed at FD[ADDR]. 787 * - bits 4-5: indicates the number of 64 byte units of frame 788 * data to be stashed. Frame data is placed at FD[ADDR] + 789 * FD[OFFSET]. 790 * For more details check the Frame Descriptor section in the 791 * hardware documentation. 792 */ 793struct dpni_queue { 794 struct { 795 u16 id; 796 enum dpni_dest type; 797 char hold_active; 798 u8 priority; 799 } destination; 800 u64 user_context; 801 struct { 802 u64 value; 803 char stash_control; 804 } flc; 805}; 806 807/** 808 * struct dpni_queue_id - Queue identification, used for enqueue commands 809 * or queue control 810 * @fqid: FQID used for enqueueing to and/or configuration of this specific FQ 811 * @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI. Only relevant 812 * for Tx queues. 813 */ 814struct dpni_queue_id { 815 u32 fqid; 816 u16 qdbin; 817}; 818 819/* Set User Context */ 820#define DPNI_QUEUE_OPT_USER_CTX 0x00000001 821#define DPNI_QUEUE_OPT_DEST 0x00000002 822#define DPNI_QUEUE_OPT_FLC 0x00000004 823#define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008 824 825int dpni_set_queue(struct fsl_mc_io *mc_io, 826 u32 cmd_flags, 827 u16 token, 828 enum dpni_queue_type qtype, 829 u8 tc, 830 u8 index, 831 u8 options, 832 const struct dpni_queue *queue); 833 834int dpni_get_queue(struct fsl_mc_io *mc_io, 835 u32 cmd_flags, 836 u16 token, 837 enum dpni_queue_type qtype, 838 u8 tc, 839 u8 index, 840 struct dpni_queue *queue, 841 struct dpni_queue_id *qid); 842 843/** 844 * enum dpni_congestion_unit - DPNI congestion units 845 * @DPNI_CONGESTION_UNIT_BYTES: bytes units 846 * @DPNI_CONGESTION_UNIT_FRAMES: frames units 847 */ 848enum dpni_congestion_unit { 849 DPNI_CONGESTION_UNIT_BYTES = 0, 850 DPNI_CONGESTION_UNIT_FRAMES 851}; 852 853/** 854 * enum dpni_congestion_point - Structure representing congestion point 855 * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and 856 * QUEUE_INDEX 857 * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used to 858 * define the DPNI this can be either per TC (default) or per 859 * interface (DPNI_OPT_SHARED_CONGESTION set at DPNI create). 860 * QUEUE_INDEX is ignored if this type is used. 861 */ 862enum dpni_congestion_point { 863 DPNI_CP_QUEUE, 864 DPNI_CP_GROUP, 865}; 866 867/** 868 * struct dpni_dest_cfg - Structure representing DPNI destination parameters 869 * @dest_type: Destination type 870 * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type 871 * @priority: Priority selection within the DPIO or DPCON channel; valid 872 * values are 0-1 or 0-7, depending on the number of priorities 873 * in that channel; not relevant for 'DPNI_DEST_NONE' option 874 */ 875struct dpni_dest_cfg { 876 enum dpni_dest dest_type; 877 int dest_id; 878 u8 priority; 879}; 880 881/* DPNI congestion options */ 882 883/** 884 * DPNI_CONG_OPT_FLOW_CONTROL - This congestion will trigger flow control or 885 * priority flow control. This will have effect only if flow control is 886 * enabled with dpni_set_link_cfg(). 887 */ 888#define DPNI_CONG_OPT_FLOW_CONTROL 0x00000040 889 890/** 891 * struct dpni_congestion_notification_cfg - congestion notification 892 * configuration 893 * @units: Units type 894 * @threshold_entry: Above this threshold we enter a congestion state. 895 * set it to '0' to disable it 896 * @threshold_exit: Below this threshold we exit the congestion state. 897 * @message_ctx: The context that will be part of the CSCN message 898 * @message_iova: I/O virtual address (must be in DMA-able memory), 899 * must be 16B aligned; valid only if 'DPNI_CONG_OPT_WRITE_MEM_<X>' 900 * is contained in 'options' 901 * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel 902 * @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_<X>' values 903 */ 904 905struct dpni_congestion_notification_cfg { 906 enum dpni_congestion_unit units; 907 u32 threshold_entry; 908 u32 threshold_exit; 909 u64 message_ctx; 910 u64 message_iova; 911 struct dpni_dest_cfg dest_cfg; 912 u16 notification_mode; 913}; 914 915int dpni_set_congestion_notification( 916 struct fsl_mc_io *mc_io, 917 u32 cmd_flags, 918 u16 token, 919 enum dpni_queue_type qtype, 920 u8 tc_id, 921 const struct dpni_congestion_notification_cfg *cfg); 922 923/** 924 * struct dpni_taildrop - Structure representing the taildrop 925 * @enable: Indicates whether the taildrop is active or not. 926 * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports 927 * byte units, this field is ignored and assumed = 0 if 928 * CONGESTION_POINT is 0. 929 * @threshold: Threshold value, in units identified by UNITS field. Value 0 930 * cannot be used as a valid taildrop threshold, THRESHOLD must 931 * be > 0 if the taildrop is enabled. 932 */ 933struct dpni_taildrop { 934 char enable; 935 enum dpni_congestion_unit units; 936 u32 threshold; 937}; 938 939int dpni_set_taildrop(struct fsl_mc_io *mc_io, 940 u32 cmd_flags, 941 u16 token, 942 enum dpni_congestion_point cg_point, 943 enum dpni_queue_type q_type, 944 u8 tc, 945 u8 q_index, 946 struct dpni_taildrop *taildrop); 947 948int dpni_get_taildrop(struct fsl_mc_io *mc_io, 949 u32 cmd_flags, 950 u16 token, 951 enum dpni_congestion_point cg_point, 952 enum dpni_queue_type q_type, 953 u8 tc, 954 u8 q_index, 955 struct dpni_taildrop *taildrop); 956 957/** 958 * struct dpni_rule_cfg - Rule configuration for table lookup 959 * @key_iova: I/O virtual address of the key (must be in DMA-able memory) 960 * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) 961 * @key_size: key and mask size (in bytes) 962 */ 963struct dpni_rule_cfg { 964 u64 key_iova; 965 u64 mask_iova; 966 u8 key_size; 967}; 968 969/** 970 * DPNI_FS_OPT_DISCARD - Discard matching traffic. If set, this takes 971 * precedence over any other configuration and matching traffic is always 972 * discarded. 973 */ 974 #define DPNI_FS_OPT_DISCARD 0x1 975 976/** 977 * DPNI_FS_OPT_SET_FLC - Set FLC value. If set, flc member of struct 978 * dpni_fs_action_cfg is used to override the FLC value set per queue. 979 * For more details check the Frame Descriptor section in the hardware 980 * documentation. 981 */ 982#define DPNI_FS_OPT_SET_FLC 0x2 983 984/** 985 * DPNI_FS_OPT_SET_STASH_CONTROL - Indicates whether the 6 lowest significant 986 * bits of FLC are used for stash control. If set, the 6 least significant bits 987 * in value are interpreted as follows: 988 * - bits 0-1: indicates the number of 64 byte units of context that are 989 * stashed. FLC value is interpreted as a memory address in this case, 990 * excluding the 6 LS bits. 991 * - bits 2-3: indicates the number of 64 byte units of frame annotation 992 * to be stashed. Annotation is placed at FD[ADDR]. 993 * - bits 4-5: indicates the number of 64 byte units of frame data to be 994 * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET]. 995 * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified. 996 */ 997#define DPNI_FS_OPT_SET_STASH_CONTROL 0x4 998 999/** 1000 * struct dpni_fs_action_cfg - Action configuration for table look-up
1001 * @flc: FLC value for traffic matching this rule. Please check the 1002 * Frame Descriptor section in the hardware documentation for 1003 * more information. 1004 * @flow_id: Identifies the Rx queue used for matching traffic. Supported 1005 * values are in range 0 to num_queue-1. 1006 * @options: Any combination of DPNI_FS_OPT_ values. 1007 */ 1008struct dpni_fs_action_cfg { 1009 u64 flc; 1010 u16 flow_id; 1011 u16 options; 1012}; 1013 1014int dpni_add_fs_entry(struct fsl_mc_io *mc_io, 1015 u32 cmd_flags, 1016 u16 token, 1017 u8 tc_id, 1018 u16 index, 1019 const struct dpni_rule_cfg *cfg, 1020 const struct dpni_fs_action_cfg *action); 1021 1022int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, 1023 u32 cmd_flags, 1024 u16 token, 1025 u8 tc_id, 1026 const struct dpni_rule_cfg *cfg); 1027 1028int dpni_add_qos_entry(struct fsl_mc_io *mc_io, 1029 u32 cmd_flags, 1030 u16 token, 1031 const struct dpni_rule_cfg *cfg, 1032 u8 tc_id, 1033 u16 index); 1034 1035int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, 1036 u32 cmd_flags, 1037 u16 token, 1038 const struct dpni_rule_cfg *cfg); 1039 1040int dpni_clear_qos_table(struct fsl_mc_io *mc_io, 1041 u32 cmd_flags, 1042 u16 token); 1043 1044int dpni_get_api_version(struct fsl_mc_io *mc_io, 1045 u32 cmd_flags, 1046 u16 *major_ver, 1047 u16 *minor_ver); 1048/** 1049 * struct dpni_tx_shaping_cfg - Structure representing DPNI tx shaping configuration 1050 * @rate_limit: Rate in Mbps 1051 * @max_burst_size: Burst size in bytes (up to 64KB) 1052 */ 1053struct dpni_tx_shaping_cfg { 1054 u32 rate_limit; 1055 u16 max_burst_size; 1056}; 1057 1058int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, 1059 u32 cmd_flags, 1060 u16 token, 1061 const struct dpni_tx_shaping_cfg *tx_cr_shaper, 1062 const struct dpni_tx_shaping_cfg *tx_er_shaper, 1063 int coupled); 1064 1065/** 1066 * struct dpni_single_step_cfg - configure single step PTP (IEEE 1588) 1067 * @en: enable single step PTP. When enabled the PTPv1 functionality 1068 * will not work. If the field is zero, offset and ch_update 1069 * parameters will be ignored 1070 * @offset: start offset from the beginning of the frame where 1071 * timestamp field is found. The offset must respect all MAC 1072 * headers, VLAN tags and other protocol headers 1073 * @ch_update: when set UDP checksum will be updated inside packet 1074 * @peer_delay: For peer-to-peer transparent clocks add this value to the 1075 * correction field in addition to the transient time update. 1076 * The value expresses nanoseconds. 1077 */ 1078struct dpni_single_step_cfg { 1079 u8 en; 1080 u8 ch_update; 1081 u16 offset; 1082 u32 peer_delay; 1083}; 1084 1085int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io, 1086 u32 cmd_flags, 1087 u16 token, 1088 struct dpni_single_step_cfg *ptp_cfg); 1089 1090int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io, 1091 u32 cmd_flags, 1092 u16 token, 1093 struct dpni_single_step_cfg *ptp_cfg); 1094 1095int dpni_enable_vlan_filter(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, 1096 u32 en); 1097 1098int dpni_add_vlan_id(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, 1099 u16 vlan_id, u8 flags, u8 tc_id, u8 flow_id); 1100 1101int dpni_remove_vlan_id(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, 1102 u16 vlan_id); 1103 1104#endif /* __FSL_DPNI_H */ 1105