linux/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
<<
>>
Prefs
   1/*======================================================================
   2    fmvj18x_cs.c 2.8 2002/03/23
   3
   4    A fmvj18x (and its compatibles) PCMCIA client driver
   5
   6    Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
   7
   8    TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 
   9    Nobuhiro Katayama, kata-n@po.iijnet.or.jp
  10
  11    The PCMCIA client code is based on code written by David Hinds.
  12    Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
  13    but is actually largely Donald Becker's AT1700 driver, which
  14    carries the following attribution:
  15
  16    Written 1993-94 by Donald Becker.
  17
  18    Copyright 1993 United States Government as represented by the
  19    Director, National Security Agency.
  20    
  21    This software may be used and distributed according to the terms
  22    of the GNU General Public License, incorporated herein by reference.
  23    
  24    The author may be reached as becker@scyld.com, or C/O
  25    Scyld Computing Corporation
  26    410 Severn Ave., Suite 210
  27    Annapolis MD 21403
  28   
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#define DRV_NAME        "fmvj18x_cs"
  34#define DRV_VERSION     "2.9"
  35
  36#include <linux/module.h>
  37#include <linux/kernel.h>
  38#include <linux/ptrace.h>
  39#include <linux/slab.h>
  40#include <linux/string.h>
  41#include <linux/timer.h>
  42#include <linux/interrupt.h>
  43#include <linux/in.h>
  44#include <linux/delay.h>
  45#include <linux/ethtool.h>
  46#include <linux/netdevice.h>
  47#include <linux/etherdevice.h>
  48#include <linux/skbuff.h>
  49#include <linux/if_arp.h>
  50#include <linux/ioport.h>
  51#include <linux/crc32.h>
  52
  53#include <pcmcia/cistpl.h>
  54#include <pcmcia/ciscode.h>
  55#include <pcmcia/ds.h>
  56
  57#include <linux/uaccess.h>
  58#include <asm/io.h>
  59
  60/*====================================================================*/
  61
  62/* Module parameters */
  63
  64MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
  65MODULE_LICENSE("GPL");
  66
  67#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  68
  69/* SRAM configuration */
  70/* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
  71INT_MODULE_PARM(sram_config, 0);
  72
  73
  74/*====================================================================*/
  75/*
  76    PCMCIA event handlers
  77 */
  78static int fmvj18x_config(struct pcmcia_device *link);
  79static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
  80static int fmvj18x_setup_mfc(struct pcmcia_device *link);
  81static void fmvj18x_release(struct pcmcia_device *link);
  82static void fmvj18x_detach(struct pcmcia_device *p_dev);
  83
  84/*
  85    LAN controller(MBH86960A) specific routines
  86 */
  87static int fjn_config(struct net_device *dev, struct ifmap *map);
  88static int fjn_open(struct net_device *dev);
  89static int fjn_close(struct net_device *dev);
  90static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
  91                                        struct net_device *dev);
  92static irqreturn_t fjn_interrupt(int irq, void *dev_id);
  93static void fjn_rx(struct net_device *dev);
  94static void fjn_reset(struct net_device *dev);
  95static void set_rx_mode(struct net_device *dev);
  96static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue);
  97static const struct ethtool_ops netdev_ethtool_ops;
  98
  99/*
 100    card type
 101 */
 102enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
 103               XXX10304, NEC, KME
 104};
 105
 106/*
 107    driver specific data structure
 108*/
 109struct local_info {
 110        struct pcmcia_device    *p_dev;
 111    long open_time;
 112    uint tx_started:1;
 113    uint tx_queue;
 114    u_short tx_queue_len;
 115    enum cardtype cardtype;
 116    u_short sent;
 117    u_char __iomem *base;
 118};
 119
 120#define MC_FILTERBREAK 64
 121
 122/*====================================================================*/
 123/* 
 124    ioport offset from the base address 
 125 */
 126#define TX_STATUS               0 /* transmit status register */
 127#define RX_STATUS               1 /* receive status register */
 128#define TX_INTR                 2 /* transmit interrupt mask register */
 129#define RX_INTR                 3 /* receive interrupt mask register */
 130#define TX_MODE                 4 /* transmit mode register */
 131#define RX_MODE                 5 /* receive mode register */
 132#define CONFIG_0                6 /* configuration register 0 */
 133#define CONFIG_1                7 /* configuration register 1 */
 134
 135#define NODE_ID                 8 /* node ID register            (bank 0) */
 136#define MAR_ADR                 8 /* multicast address registers (bank 1) */
 137
 138#define DATAPORT                8 /* buffer mem port registers   (bank 2) */
 139#define TX_START               10 /* transmit start register */
 140#define COL_CTRL               11 /* 16 collision control register */
 141#define BMPR12                 12 /* reserved */
 142#define BMPR13                 13 /* reserved */
 143#define RX_SKIP                14 /* skip received packet register */
 144
 145#define LAN_CTRL               16 /* LAN card control register */
 146
 147#define MAC_ID               0x1a /* hardware address */
 148#define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
 149
 150/* 
 151    control bits 
 152 */
 153#define ENA_TMT_OK           0x80
 154#define ENA_TMT_REC          0x20
 155#define ENA_COL              0x04
 156#define ENA_16_COL           0x02
 157#define ENA_TBUS_ERR         0x01
 158
 159#define ENA_PKT_RDY          0x80
 160#define ENA_BUS_ERR          0x40
 161#define ENA_LEN_ERR          0x08
 162#define ENA_ALG_ERR          0x04
 163#define ENA_CRC_ERR          0x02
 164#define ENA_OVR_FLO          0x01
 165
 166/* flags */
 167#define F_TMT_RDY            0x80 /* can accept new packet */
 168#define F_NET_BSY            0x40 /* carrier is detected */
 169#define F_TMT_OK             0x20 /* send packet successfully */
 170#define F_SRT_PKT            0x10 /* short packet error */
 171#define F_COL_ERR            0x04 /* collision error */
 172#define F_16_COL             0x02 /* 16 collision error */
 173#define F_TBUS_ERR           0x01 /* bus read error */
 174
 175#define F_PKT_RDY            0x80 /* packet(s) in buffer */
 176#define F_BUS_ERR            0x40 /* bus read error */
 177#define F_LEN_ERR            0x08 /* short packet */
 178#define F_ALG_ERR            0x04 /* frame error */
 179#define F_CRC_ERR            0x02 /* CRC error */
 180#define F_OVR_FLO            0x01 /* overflow error */
 181
 182#define F_BUF_EMP            0x40 /* receive buffer is empty */
 183
 184#define F_SKP_PKT            0x05 /* drop packet in buffer */
 185
 186/* default bitmaps */
 187#define D_TX_INTR  ( ENA_TMT_OK )
 188#define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
 189                   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
 190#define TX_STAT_M  ( F_TMT_RDY )
 191#define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
 192                   | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
 193
 194/* commands */
 195#define D_TX_MODE            0x06 /* no tests, detect carrier */
 196#define ID_MATCHED           0x02 /* (RX_MODE) */
 197#define RECV_ALL             0x03 /* (RX_MODE) */
 198#define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
 199#define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
 200#define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
 201#define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
 202#define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
 203#define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
 204#define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
 205#define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
 206#define DO_TX                0x80 /* do transmit packet */
 207#define SEND_PKT             0x81 /* send a packet */
 208#define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
 209#define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
 210#define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
 211#define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
 212#define INTR_OFF             0x0d /* LAN controller ignores interrupts */
 213#define INTR_ON              0x1d /* LAN controller will catch interrupts */
 214
 215#define TX_TIMEOUT              ((400*HZ)/1000)
 216
 217#define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
 218#define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
 219#define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
 220
 221static const struct net_device_ops fjn_netdev_ops = {
 222        .ndo_open               = fjn_open,
 223        .ndo_stop               = fjn_close,
 224        .ndo_start_xmit         = fjn_start_xmit,
 225        .ndo_tx_timeout         = fjn_tx_timeout,
 226        .ndo_set_config         = fjn_config,
 227        .ndo_set_rx_mode        = set_rx_mode,
 228        .ndo_set_mac_address    = eth_mac_addr,
 229        .ndo_validate_addr      = eth_validate_addr,
 230};
 231
 232static int fmvj18x_probe(struct pcmcia_device *link)
 233{
 234    struct local_info *lp;
 235    struct net_device *dev;
 236
 237    dev_dbg(&link->dev, "fmvj18x_attach()\n");
 238
 239    /* Make up a FMVJ18x specific data structure */
 240    dev = alloc_etherdev(sizeof(struct local_info));
 241    if (!dev)
 242        return -ENOMEM;
 243    lp = netdev_priv(dev);
 244    link->priv = dev;
 245    lp->p_dev = link;
 246    lp->base = NULL;
 247
 248    /* The io structure describes IO port mapping */
 249    link->resource[0]->end = 32;
 250    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 251
 252    /* General socket configuration */
 253    link->config_flags |= CONF_ENABLE_IRQ;
 254
 255    dev->netdev_ops = &fjn_netdev_ops;
 256    dev->watchdog_timeo = TX_TIMEOUT;
 257
 258    dev->ethtool_ops = &netdev_ethtool_ops;
 259
 260    return fmvj18x_config(link);
 261} /* fmvj18x_attach */
 262
 263/*====================================================================*/
 264
 265static void fmvj18x_detach(struct pcmcia_device *link)
 266{
 267    struct net_device *dev = link->priv;
 268
 269    dev_dbg(&link->dev, "fmvj18x_detach\n");
 270
 271    unregister_netdev(dev);
 272
 273    fmvj18x_release(link);
 274
 275    free_netdev(dev);
 276} /* fmvj18x_detach */
 277
 278/*====================================================================*/
 279
 280static int mfc_try_io_port(struct pcmcia_device *link)
 281{
 282    int i, ret;
 283    static const unsigned int serial_base[5] =
 284        { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 285
 286    for (i = 0; i < 5; i++) {
 287        link->resource[1]->start = serial_base[i];
 288        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 289        if (link->resource[1]->start == 0) {
 290            link->resource[1]->end = 0;
 291            pr_notice("out of resource for serial\n");
 292        }
 293        ret = pcmcia_request_io(link);
 294        if (ret == 0)
 295                return ret;
 296    }
 297    return ret;
 298}
 299
 300static int ungermann_try_io_port(struct pcmcia_device *link)
 301{
 302    int ret;
 303    unsigned int ioaddr;
 304    /*
 305        Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
 306        0x380,0x3c0 only for ioport.
 307    */
 308    for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
 309        link->resource[0]->start = ioaddr;
 310        ret = pcmcia_request_io(link);
 311        if (ret == 0) {
 312            /* calculate ConfigIndex value */
 313            link->config_index =
 314                ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 315            return ret;
 316        }
 317    }
 318    return ret; /* RequestIO failed */
 319}
 320
 321static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 322{
 323        return 0; /* strange, but that's what the code did already before... */
 324}
 325
 326static int fmvj18x_config(struct pcmcia_device *link)
 327{
 328    struct net_device *dev = link->priv;
 329    struct local_info *lp = netdev_priv(dev);
 330    int i, ret;
 331    unsigned int ioaddr;
 332    enum cardtype cardtype;
 333    char *card_name = "unknown";
 334    u8 *buf;
 335    size_t len;
 336    u_char buggybuf[32];
 337
 338    dev_dbg(&link->dev, "fmvj18x_config\n");
 339
 340    link->io_lines = 5;
 341
 342    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 343    kfree(buf);
 344
 345    if (len) {
 346        /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
 347        ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
 348        if (ret != 0)
 349                goto failed;
 350
 351        switch (link->manf_id) {
 352        case MANFID_TDK:
 353            cardtype = TDK;
 354            if (link->card_id == PRODID_TDK_GN3410 ||
 355                link->card_id == PRODID_TDK_NP9610 ||
 356                link->card_id == PRODID_TDK_MN3200) {
 357                /* MultiFunction Card */
 358                link->config_base = 0x800;
 359                link->config_index = 0x47;
 360                link->resource[1]->end = 8;
 361            }
 362            break;
 363        case MANFID_NEC:
 364            cardtype = NEC; /* MultiFunction Card */
 365            link->config_base = 0x800;
 366            link->config_index = 0x47;
 367            link->resource[1]->end = 8;
 368            break;
 369        case MANFID_KME:
 370            cardtype = KME; /* MultiFunction Card */
 371            link->config_base = 0x800;
 372            link->config_index = 0x47;
 373            link->resource[1]->end = 8;
 374            break;
 375        case MANFID_CONTEC:
 376            cardtype = CONTEC;
 377            break;
 378        case MANFID_FUJITSU:
 379            if (link->config_base == 0x0fe0)
 380                cardtype = MBH10302;
 381            else if (link->card_id == PRODID_FUJITSU_MBH10302) 
 382                /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
 383                   but these are MBH10304 based card. */ 
 384                cardtype = MBH10304;
 385            else if (link->card_id == PRODID_FUJITSU_MBH10304)
 386                cardtype = MBH10304;
 387            else
 388                cardtype = LA501;
 389            break;
 390        default:
 391            cardtype = MBH10304;
 392        }
 393    } else {
 394        /* old type card */
 395        switch (link->manf_id) {
 396        case MANFID_FUJITSU:
 397            if (link->card_id == PRODID_FUJITSU_MBH10304) {
 398                cardtype = XXX10304;    /* MBH10304 with buggy CIS */
 399                link->config_index = 0x20;
 400            } else {
 401                cardtype = MBH10302;    /* NextCom NC5310, etc. */
 402                link->config_index = 1;
 403            }
 404            break;
 405        case MANFID_UNGERMANN:
 406            cardtype = UNGERMANN;
 407            break;
 408        default:
 409            cardtype = MBH10302;
 410            link->config_index = 1;
 411        }
 412    }
 413
 414    if (link->resource[1]->end != 0) {
 415        ret = mfc_try_io_port(link);
 416        if (ret != 0) goto failed;
 417    } else if (cardtype == UNGERMANN) {
 418        ret = ungermann_try_io_port(link);
 419        if (ret != 0) goto failed;
 420    } else { 
 421            ret = pcmcia_request_io(link);
 422            if (ret)
 423                    goto failed;
 424    }
 425    ret = pcmcia_request_irq(link, fjn_interrupt);
 426    if (ret)
 427            goto failed;
 428    ret = pcmcia_enable_device(link);
 429    if (ret)
 430            goto failed;
 431
 432    dev->irq = link->irq;
 433    dev->base_addr = link->resource[0]->start;
 434
 435    if (resource_size(link->resource[1]) != 0) {
 436        ret = fmvj18x_setup_mfc(link);
 437        if (ret != 0) goto failed;
 438    }
 439
 440    ioaddr = dev->base_addr;
 441
 442    /* Reset controller */
 443    if (sram_config == 0) 
 444        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 445    else
 446        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 447
 448    /* Power On chip and select bank 0 */
 449    if (cardtype == MBH10302)
 450        outb(BANK_0, ioaddr + CONFIG_1);
 451    else
 452        outb(BANK_0U, ioaddr + CONFIG_1);
 453    
 454    /* Set hardware address */
 455    switch (cardtype) {
 456    case MBH10304:
 457    case TDK:
 458    case LA501:
 459    case CONTEC:
 460    case NEC:
 461    case KME:
 462        if (cardtype == MBH10304) {
 463            card_name = "FMV-J182";
 464
 465            len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 466            if (len < 11) {
 467                    kfree(buf);
 468                    goto failed;
 469            }
 470            /* Read MACID from CIS */
 471            for (i = 0; i < 6; i++)
 472                    dev->dev_addr[i] = buf[i + 5];
 473            kfree(buf);
 474        } else {
 475            if (pcmcia_get_mac_from_cis(link, dev))
 476                goto failed;
 477            if( cardtype == TDK ) {
 478                card_name = "TDK LAK-CD021";
 479            } else if( cardtype == LA501 ) {
 480                card_name = "LA501";
 481            } else if( cardtype == NEC ) {
 482                card_name = "PK-UG-J001";
 483            } else if( cardtype == KME ) {
 484                card_name = "Panasonic";
 485            } else {
 486                card_name = "C-NET(PC)C";
 487            }
 488        }
 489        break;
 490    case UNGERMANN:
 491        /* Read MACID from register */
 492        for (i = 0; i < 6; i++) 
 493            dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
 494        card_name = "Access/CARD";
 495        break;
 496    case XXX10304:
 497        /* Read MACID from Buggy CIS */
 498        if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
 499            pr_notice("unable to read hardware net address\n");
 500            goto failed;
 501        }
 502        for (i = 0 ; i < 6; i++) {
 503            dev->dev_addr[i] = buggybuf[i];
 504        }
 505        card_name = "FMV-J182";
 506        break;
 507    case MBH10302:
 508    default:
 509        /* Read MACID from register */
 510        for (i = 0; i < 6; i++) 
 511            dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
 512        card_name = "FMV-J181";
 513        break;
 514    }
 515
 516    lp->cardtype = cardtype;
 517    SET_NETDEV_DEV(dev, &link->dev);
 518
 519    if (register_netdev(dev) != 0) {
 520        pr_notice("register_netdev() failed\n");
 521        goto failed;
 522    }
 523
 524    /* print current configuration */
 525    netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
 526                card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
 527                dev->base_addr, dev->irq, dev->dev_addr);
 528
 529    return 0;
 530    
 531failed:
 532    fmvj18x_release(link);
 533    return -ENODEV;
 534} /* fmvj18x_config */
 535/*====================================================================*/
 536
 537static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 538{
 539    u_char __iomem *base;
 540    int i, j;
 541
 542    /* Allocate a small memory window */
 543    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 544    link->resource[2]->start = 0; link->resource[2]->end = 0;
 545    i = pcmcia_request_window(link, link->resource[2], 0);
 546    if (i != 0)
 547        return -1;
 548
 549    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
 550    if (!base) {
 551        pcmcia_release_window(link, link->resource[2]);
 552        return -1;
 553    }
 554
 555    pcmcia_map_mem_page(link, link->resource[2], 0);
 556
 557    /*
 558     *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
 559     *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
 560     *  'xx' is garbage.
 561     *  'yy' is MAC address.
 562    */ 
 563    for (i = 0; i < 0x200; i++) {
 564        if (readb(base+i*2) == 0x22) {  
 565                if (readb(base+(i-1)*2) == 0xff &&
 566                    readb(base+(i+5)*2) == 0x04 &&
 567                    readb(base+(i+6)*2) == 0x06 &&
 568                    readb(base+(i+13)*2) == 0xff)
 569                        break;
 570        }
 571    }
 572
 573    if (i != 0x200) {
 574        for (j = 0 ; j < 6; j++,i++) {
 575            node_id[j] = readb(base+(i+7)*2);
 576        }
 577    }
 578
 579    iounmap(base);
 580    j = pcmcia_release_window(link, link->resource[2]);
 581    return (i != 0x200) ? 0 : -1;
 582
 583} /* fmvj18x_get_hwinfo */
 584/*====================================================================*/
 585
 586static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 587{
 588    int i;
 589    struct net_device *dev = link->priv;
 590    unsigned int ioaddr;
 591    struct local_info *lp = netdev_priv(dev);
 592
 593    /* Allocate a small memory window */
 594    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 595    link->resource[3]->start = link->resource[3]->end = 0;
 596    i = pcmcia_request_window(link, link->resource[3], 0);
 597    if (i != 0)
 598        return -1;
 599
 600    lp->base = ioremap(link->resource[3]->start,
 601                       resource_size(link->resource[3]));
 602    if (lp->base == NULL) {
 603        netdev_notice(dev, "ioremap failed\n");
 604        return -1;
 605    }
 606
 607    i = pcmcia_map_mem_page(link, link->resource[3], 0);
 608    if (i != 0) {
 609        iounmap(lp->base);
 610        lp->base = NULL;
 611        return -1;
 612    }
 613    
 614    ioaddr = dev->base_addr;
 615    writeb(0x47, lp->base+0x800);       /* Config Option Register of LAN */
 616    writeb(0x0,  lp->base+0x802);       /* Config and Status Register */
 617
 618    writeb(ioaddr & 0xff, lp->base+0x80a);        /* I/O Base(Low) of LAN */
 619    writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
 620   
 621    writeb(0x45, lp->base+0x820);       /* Config Option Register of Modem */
 622    writeb(0x8,  lp->base+0x822);       /* Config and Status Register */
 623
 624    return 0;
 625
 626}
 627/*====================================================================*/
 628
 629static void fmvj18x_release(struct pcmcia_device *link)
 630{
 631
 632    struct net_device *dev = link->priv;
 633    struct local_info *lp = netdev_priv(dev);
 634    u_char __iomem *tmp;
 635
 636    dev_dbg(&link->dev, "fmvj18x_release\n");
 637
 638    if (lp->base != NULL) {
 639        tmp = lp->base;
 640        lp->base = NULL;    /* set NULL before iounmap */
 641        iounmap(tmp);
 642    }
 643
 644    pcmcia_disable_device(link);
 645
 646}
 647
 648static int fmvj18x_suspend(struct pcmcia_device *link)
 649{
 650        struct net_device *dev = link->priv;
 651
 652        if (link->open)
 653                netif_device_detach(dev);
 654
 655        return 0;
 656}
 657
 658static int fmvj18x_resume(struct pcmcia_device *link)
 659{
 660        struct net_device *dev = link->priv;
 661
 662        if (link->open) {
 663                fjn_reset(dev);
 664                netif_device_attach(dev);
 665        }
 666
 667        return 0;
 668}
 669
 670/*====================================================================*/
 671
 672static const struct pcmcia_device_id fmvj18x_ids[] = {
 673        PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
 674        PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
 675        PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
 676        PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
 677        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
 678        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
 679        PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
 680        PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
 681        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
 682        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
 683        PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
 684        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
 685        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
 686        PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
 687        PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
 688        PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
 689        PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
 690        PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 691        PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 692        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 693        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
 694        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 695        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 696        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
 697        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 698        PCMCIA_DEVICE_NULL,
 699};
 700MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
 701
 702static struct pcmcia_driver fmvj18x_cs_driver = {
 703        .owner          = THIS_MODULE,
 704        .name           = "fmvj18x_cs",
 705        .probe          = fmvj18x_probe,
 706        .remove         = fmvj18x_detach,
 707        .id_table       = fmvj18x_ids,
 708        .suspend        = fmvj18x_suspend,
 709        .resume         = fmvj18x_resume,
 710};
 711module_pcmcia_driver(fmvj18x_cs_driver);
 712
 713/*====================================================================*/
 714
 715static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
 716{
 717    struct net_device *dev = dev_id;
 718    struct local_info *lp = netdev_priv(dev);
 719    unsigned int ioaddr;
 720    unsigned short tx_stat, rx_stat;
 721
 722    ioaddr = dev->base_addr;
 723
 724    /* avoid multiple interrupts */
 725    outw(0x0000, ioaddr + TX_INTR);
 726
 727    /* wait for a while */
 728    udelay(1);
 729
 730    /* get status */
 731    tx_stat = inb(ioaddr + TX_STATUS);
 732    rx_stat = inb(ioaddr + RX_STATUS);
 733
 734    /* clear status */
 735    outb(tx_stat, ioaddr + TX_STATUS);
 736    outb(rx_stat, ioaddr + RX_STATUS);
 737    
 738    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
 739    pr_debug("               tx_status %02x.\n", tx_stat);
 740    
 741    if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 742        /* there is packet(s) in rx buffer */
 743        fjn_rx(dev);
 744    }
 745    if (tx_stat & F_TMT_RDY) {
 746        dev->stats.tx_packets += lp->sent ;
 747        lp->sent = 0 ;
 748        if (lp->tx_queue) {
 749            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 750            lp->sent = lp->tx_queue ;
 751            lp->tx_queue = 0;
 752            lp->tx_queue_len = 0;
 753            netif_trans_update(dev);
 754        } else {
 755            lp->tx_started = 0;
 756        }
 757        netif_wake_queue(dev);
 758    }
 759    pr_debug("%s: exiting interrupt,\n", dev->name);
 760    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
 761
 762    outb(D_TX_INTR, ioaddr + TX_INTR);
 763    outb(D_RX_INTR, ioaddr + RX_INTR);
 764
 765    if (lp->base != NULL) {
 766        /* Ack interrupt for multifunction card */
 767        writeb(0x01, lp->base+0x802);
 768        writeb(0x09, lp->base+0x822);
 769    }
 770
 771    return IRQ_HANDLED;
 772
 773} /* fjn_interrupt */
 774
 775/*====================================================================*/
 776
 777static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue)
 778{
 779    struct local_info *lp = netdev_priv(dev);
 780    unsigned int ioaddr = dev->base_addr;
 781
 782    netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
 783                  htons(inw(ioaddr + TX_STATUS)),
 784                  inb(ioaddr + TX_STATUS) & F_TMT_RDY
 785                  ? "IRQ conflict" : "network cable problem");
 786    netdev_notice(dev, "timeout registers: %04x %04x %04x "
 787                  "%04x %04x %04x %04x %04x.\n",
 788                  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
 789                  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
 790                  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
 791                  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
 792    dev->stats.tx_errors++;
 793    /* ToDo: We should try to restart the adaptor... */
 794    local_irq_disable();
 795    fjn_reset(dev);
 796
 797    lp->tx_started = 0;
 798    lp->tx_queue = 0;
 799    lp->tx_queue_len = 0;
 800    lp->sent = 0;
 801    lp->open_time = jiffies;
 802    local_irq_enable();
 803    netif_wake_queue(dev);
 804}
 805
 806static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
 807                                        struct net_device *dev)
 808{
 809    struct local_info *lp = netdev_priv(dev);
 810    unsigned int ioaddr = dev->base_addr;
 811    short length = skb->len;
 812    
 813    if (length < ETH_ZLEN)
 814    {
 815        if (skb_padto(skb, ETH_ZLEN))
 816                return NETDEV_TX_OK;
 817        length = ETH_ZLEN;
 818    }
 819
 820    netif_stop_queue(dev);
 821
 822    {
 823        unsigned char *buf = skb->data;
 824
 825        if (length > ETH_FRAME_LEN) {
 826            netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
 827                          length);
 828            return NETDEV_TX_BUSY;
 829        }
 830
 831        netdev_dbg(dev, "Transmitting a packet of length %lu\n",
 832                   (unsigned long)skb->len);
 833        dev->stats.tx_bytes += skb->len;
 834
 835        /* Disable both interrupts. */
 836        outw(0x0000, ioaddr + TX_INTR);
 837
 838        /* wait for a while */
 839        udelay(1);
 840
 841        outw(length, ioaddr + DATAPORT);
 842        outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 843
 844        lp->tx_queue++;
 845        lp->tx_queue_len += ((length+3) & ~1);
 846
 847        if (lp->tx_started == 0) {
 848            /* If the Tx is idle, always trigger a transmit. */
 849            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 850            lp->sent = lp->tx_queue ;
 851            lp->tx_queue = 0;
 852            lp->tx_queue_len = 0;
 853            lp->tx_started = 1;
 854            netif_start_queue(dev);
 855        } else {
 856            if( sram_config == 0 ) {
 857                if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
 858                    /* Yes, there is room for one more packet. */
 859                    netif_start_queue(dev);
 860            } else {
 861                if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 
 862                                                lp->tx_queue < 127 )
 863                    /* Yes, there is room for one more packet. */
 864                    netif_start_queue(dev);
 865            }
 866        }
 867
 868        /* Re-enable interrupts */
 869        outb(D_TX_INTR, ioaddr + TX_INTR);
 870        outb(D_RX_INTR, ioaddr + RX_INTR);
 871    }
 872    dev_kfree_skb (skb);
 873
 874    return NETDEV_TX_OK;
 875} /* fjn_start_xmit */
 876
 877/*====================================================================*/
 878
 879static void fjn_reset(struct net_device *dev)
 880{
 881    struct local_info *lp = netdev_priv(dev);
 882    unsigned int ioaddr = dev->base_addr;
 883    int i;
 884
 885    netdev_dbg(dev, "fjn_reset() called\n");
 886
 887    /* Reset controller */
 888    if( sram_config == 0 ) 
 889        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 890    else
 891        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 892
 893    /* Power On chip and select bank 0 */
 894    if (lp->cardtype == MBH10302)
 895        outb(BANK_0, ioaddr + CONFIG_1);
 896    else
 897        outb(BANK_0U, ioaddr + CONFIG_1);
 898
 899    /* Set Tx modes */
 900    outb(D_TX_MODE, ioaddr + TX_MODE);
 901    /* set Rx modes */
 902    outb(ID_MATCHED, ioaddr + RX_MODE);
 903
 904    /* Set hardware address */
 905    for (i = 0; i < 6; i++) 
 906        outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
 907
 908    /* (re)initialize the multicast table */
 909    set_rx_mode(dev);
 910
 911    /* Switch to bank 2 (runtime mode) */
 912    if (lp->cardtype == MBH10302)
 913        outb(BANK_2, ioaddr + CONFIG_1);
 914    else
 915        outb(BANK_2U, ioaddr + CONFIG_1);
 916
 917    /* set 16col ctrl bits */
 918    if( lp->cardtype == TDK || lp->cardtype == CONTEC) 
 919        outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
 920    else
 921        outb(AUTO_MODE, ioaddr + COL_CTRL);
 922
 923    /* clear Reserved Regs */
 924    outb(0x00, ioaddr + BMPR12);
 925    outb(0x00, ioaddr + BMPR13);
 926
 927    /* reset Skip packet reg. */
 928    outb(0x01, ioaddr + RX_SKIP);
 929
 930    /* Enable Tx and Rx */
 931    if( sram_config == 0 )
 932        outb(CONFIG0_DFL, ioaddr + CONFIG_0);
 933    else
 934        outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
 935
 936    /* Init receive pointer ? */
 937    inw(ioaddr + DATAPORT);
 938    inw(ioaddr + DATAPORT);
 939
 940    /* Clear all status */
 941    outb(0xff, ioaddr + TX_STATUS);
 942    outb(0xff, ioaddr + RX_STATUS);
 943
 944    if (lp->cardtype == MBH10302)
 945        outb(INTR_OFF, ioaddr + LAN_CTRL);
 946
 947    /* Turn on Rx interrupts */
 948    outb(D_TX_INTR, ioaddr + TX_INTR);
 949    outb(D_RX_INTR, ioaddr + RX_INTR);
 950
 951    /* Turn on interrupts from LAN card controller */
 952    if (lp->cardtype == MBH10302)
 953        outb(INTR_ON, ioaddr + LAN_CTRL);
 954} /* fjn_reset */
 955
 956/*====================================================================*/
 957
 958static void fjn_rx(struct net_device *dev)
 959{
 960    unsigned int ioaddr = dev->base_addr;
 961    int boguscount = 10;        /* 5 -> 10: by agy 19940922 */
 962
 963    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
 964          dev->name, inb(ioaddr + RX_STATUS));
 965
 966    while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 967        u_short status = inw(ioaddr + DATAPORT);
 968
 969        netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
 970                   inb(ioaddr + RX_MODE), status);
 971#ifndef final_version
 972        if (status == 0) {
 973            outb(F_SKP_PKT, ioaddr + RX_SKIP);
 974            break;
 975        }
 976#endif
 977        if ((status & 0xF0) != 0x20) {  /* There was an error. */
 978            dev->stats.rx_errors++;
 979            if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
 980            if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
 981            if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
 982            if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
 983        } else {
 984            u_short pkt_len = inw(ioaddr + DATAPORT);
 985            /* Malloc up new buffer. */
 986            struct sk_buff *skb;
 987
 988            if (pkt_len > 1550) {
 989                netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
 990                              pkt_len);
 991                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 992                dev->stats.rx_errors++;
 993                break;
 994            }
 995            skb = netdev_alloc_skb(dev, pkt_len + 2);
 996            if (skb == NULL) {
 997                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 998                dev->stats.rx_dropped++;
 999                break;
1000            }
1001
1002            skb_reserve(skb, 2);
1003            insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
1004                 (pkt_len + 1) >> 1);
1005            skb->protocol = eth_type_trans(skb, dev);
1006
1007            {
1008                int i;
1009                pr_debug("%s: Rxed packet of length %d: ",
1010                        dev->name, pkt_len);
1011                for (i = 0; i < 14; i++)
1012                        pr_debug(" %02x", skb->data[i]);
1013                pr_debug(".\n");
1014            }
1015
1016            netif_rx(skb);
1017            dev->stats.rx_packets++;
1018            dev->stats.rx_bytes += pkt_len;
1019        }
1020        if (--boguscount <= 0)
1021            break;
1022    }
1023
1024    /* If any worth-while packets have been received, dev_rint()
1025           has done a netif_wake_queue() for us and will work on them
1026           when we get to the bottom-half routine. */
1027/*
1028    if (lp->cardtype != TDK) {
1029        int i;
1030        for (i = 0; i < 20; i++) {
1031            if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1032                break;
1033            (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
1034            outb(F_SKP_PKT, ioaddr + RX_SKIP);
1035        }
1036
1037        if (i > 0)
1038            pr_debug("%s: Exint Rx packet with mode %02x after "
1039                  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1040    }
1041*/
1042} /* fjn_rx */
1043
1044/*====================================================================*/
1045
1046static void netdev_get_drvinfo(struct net_device *dev,
1047                               struct ethtool_drvinfo *info)
1048{
1049        strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1050        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1051        snprintf(info->bus_info, sizeof(info->bus_info),
1052                "PCMCIA 0x%lx", dev->base_addr);
1053}
1054
1055static const struct ethtool_ops netdev_ethtool_ops = {
1056        .get_drvinfo            = netdev_get_drvinfo,
1057};
1058
1059static int fjn_config(struct net_device *dev, struct ifmap *map){
1060    return 0;
1061}
1062
1063static int fjn_open(struct net_device *dev)
1064{
1065    struct local_info *lp = netdev_priv(dev);
1066    struct pcmcia_device *link = lp->p_dev;
1067
1068    pr_debug("fjn_open('%s').\n", dev->name);
1069
1070    if (!pcmcia_dev_present(link))
1071        return -ENODEV;
1072    
1073    link->open++;
1074    
1075    fjn_reset(dev);
1076    
1077    lp->tx_started = 0;
1078    lp->tx_queue = 0;
1079    lp->tx_queue_len = 0;
1080    lp->open_time = jiffies;
1081    netif_start_queue(dev);
1082    
1083    return 0;
1084} /* fjn_open */
1085
1086/*====================================================================*/
1087
1088static int fjn_close(struct net_device *dev)
1089{
1090    struct local_info *lp = netdev_priv(dev);
1091    struct pcmcia_device *link = lp->p_dev;
1092    unsigned int ioaddr = dev->base_addr;
1093
1094    pr_debug("fjn_close('%s').\n", dev->name);
1095
1096    lp->open_time = 0;
1097    netif_stop_queue(dev);
1098
1099    /* Set configuration register 0 to disable Tx and Rx. */
1100    if( sram_config == 0 ) 
1101        outb(CONFIG0_RST ,ioaddr + CONFIG_0);
1102    else
1103        outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
1104
1105    /* Update the statistics -- ToDo. */
1106
1107    /* Power-down the chip.  Green, green, green! */
1108    outb(CHIP_OFF ,ioaddr + CONFIG_1);
1109
1110    /* Set the ethernet adaptor disable IRQ */
1111    if (lp->cardtype == MBH10302)
1112        outb(INTR_OFF, ioaddr + LAN_CTRL);
1113
1114    link->open--;
1115
1116    return 0;
1117} /* fjn_close */
1118
1119/*====================================================================*/
1120
1121/*
1122  Set the multicast/promiscuous mode for this adaptor.
1123*/
1124
1125static void set_rx_mode(struct net_device *dev)
1126{
1127    unsigned int ioaddr = dev->base_addr;
1128    u_char mc_filter[8];                 /* Multicast hash filter */
1129    u_long flags;
1130    int i;
1131    
1132    int saved_bank;
1133    int saved_config_0 = inb(ioaddr + CONFIG_0);
1134     
1135    local_irq_save(flags); 
1136
1137    /* Disable Tx and Rx */
1138    if (sram_config == 0) 
1139        outb(CONFIG0_RST, ioaddr + CONFIG_0);
1140    else
1141        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
1142
1143    if (dev->flags & IFF_PROMISC) {
1144        memset(mc_filter, 0xff, sizeof(mc_filter));
1145        outb(3, ioaddr + RX_MODE);      /* Enable promiscuous mode */
1146    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
1147               (dev->flags & IFF_ALLMULTI)) {
1148        /* Too many to filter perfectly -- accept all multicasts. */
1149        memset(mc_filter, 0xff, sizeof(mc_filter));
1150        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1151    } else if (netdev_mc_empty(dev)) {
1152        memset(mc_filter, 0x00, sizeof(mc_filter));
1153        outb(1, ioaddr + RX_MODE);      /* Ignore almost all multicasts. */
1154    } else {
1155        struct netdev_hw_addr *ha;
1156
1157        memset(mc_filter, 0, sizeof(mc_filter));
1158        netdev_for_each_mc_addr(ha, dev) {
1159            unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
1160            mc_filter[bit >> 3] |= (1 << (bit & 7));
1161        }
1162        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1163    }
1164
1165    /* Switch to bank 1 and set the multicast table. */
1166    saved_bank = inb(ioaddr + CONFIG_1);
1167    outb(0xe4, ioaddr + CONFIG_1);
1168
1169    for (i = 0; i < 8; i++)
1170        outb(mc_filter[i], ioaddr + MAR_ADR + i);
1171    outb(saved_bank, ioaddr + CONFIG_1);
1172
1173    outb(saved_config_0, ioaddr + CONFIG_0);
1174
1175    local_irq_restore(flags);
1176}
1177