// SPDX-License-Identifier: GPL-2.0-only
/****************************************************************************
 * Driver for Solarflare network controllers and boards
 * Copyright 2005-2006 Fen Systems Ltd.
 * Copyright 2005-2013 Solarflare Communications Inc.
 */

#include <linux/pci.h>
#include <linux/tcp.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/ipv6.h>
#include <linux/slab.h>
#include <net/ipv6.h>
#include <linux/if_ether.h>
#include <linux/highmem.h>
#include <linux/cache.h>
#include "net_driver.h"
#include "efx.h"
#include "io.h"
#include "nic.h"
#include "tx.h"
#include "tx_common.h"
#include "workarounds.h"
#include "ef10_regs.h"

#ifdef EFX_USE_PIO

#define EFX_PIOBUF_SIZE_DEF ALIGN(256, L1_CACHE_BYTES)
unsigned int efx_piobuf_size __read_mostly = EFX_PIOBUF_SIZE_DEF;

#endif /* EFX_USE_PIO */

static inline u8 *efx_tx_get_copy_buffer(struct efx_tx_queue *tx_queue,
                                         struct efx_tx_buffer *buffer)
{
        unsigned int index = efx_tx_queue_get_insert_index(tx_queue);
        struct efx_buffer *page_buf =
                &tx_queue->cb_page[index >> (PAGE_SHIFT - EFX_TX_CB_ORDER)];
        unsigned int offset =
                ((index << EFX_TX_CB_ORDER) + NET_IP_ALIGN) & (PAGE_SIZE - 1);

        if (unlikely(!page_buf->addr) &&
            efx_nic_alloc_buffer(tx_queue->efx, page_buf, PAGE_SIZE,
                                 GFP_ATOMIC))
                return NULL;
        buffer->dma_addr = page_buf->dma_addr + offset;
        buffer->unmap_len = 0;
        return (u8 *)page_buf->addr + offset;
}

u8 *efx_tx_get_copy_buffer_limited(struct efx_tx_queue *tx_queue,
                                   struct efx_tx_buffer *buffer, size_t len)
{
        if (len > EFX_TX_CB_SIZE)
                return NULL;
        return efx_tx_get_copy_buffer(tx_queue, buffer);
}

static void efx_tx_maybe_stop_queue(struct efx_tx_queue *txq1)
{
        /* We need to consider all queues that the net core sees as one */
        struct efx_nic *efx = txq1->efx;
        struct efx_tx_queue *txq2;
        unsigned int fill_level;

        fill_level = efx_channel_tx_old_fill_level(txq1->channel);
        if (likely(fill_level < efx->txq_stop_thresh))
                return;

        /* We used the stale old_read_count above, which gives us a
         * pessimistic estimate of the fill level (which may even
         * validly be >= efx->txq_entries).  Now try again using
         * read_count (more likely to be a cache miss).
         *
         * If we read read_count and then conditionally stop the
         * queue, it is possible for the completion path to race with
         * us and complete all outstanding descriptors in the middle,
         * after which there will be no more completions to wake it.
         * Therefore we stop the queue first, then read read_count
         * (with a memory barrier to ensure the ordering), then
         * restart the queue if the fill level turns out to be low
         * enough.
         */
        netif_tx_stop_queue(txq1->core_txq);
        smp_mb();
        efx_for_each_channel_tx_queue(txq2, txq1->channel)
                txq2->old_read_count = READ_ONCE(txq2->read_count);

        fill_level = efx_channel_tx_old_fill_level(txq1->channel);
        EFX_WARN_ON_ONCE_PARANOID(fill_level >= efx->txq_entries);
        if (likely(fill_level < efx->txq_stop_thresh)) {
                smp_mb();
                if (likely(!efx->loopback_selftest))
                        netif_tx_start_queue(txq1->core_txq);
        }
}

static int efx_enqueue_skb_copy(struct efx_tx_queue *tx_queue,
                                struct sk_buff *skb)
{
        unsigned int copy_len = skb->len;
        struct efx_tx_buffer *buffer;
        u8 *copy_buffer;
        int rc;

        EFX_WARN_ON_ONCE_PARANOID(copy_len > EFX_TX_CB_SIZE);

        buffer = efx_tx_queue_get_insert_buffer(tx_queue);

        copy_buffer = efx_tx_get_copy_buffer(tx_queue, buffer);
        if (unlikely(!copy_buffer))
                return -ENOMEM;

        rc = skb_copy_bits(skb, 0, copy_buffer, copy_len);
        EFX_WARN_ON_PARANOID(rc);
        buffer->len = copy_len;

        buffer->skb = skb;
        buffer->flags = EFX_TX_BUF_SKB;

        ++tx_queue->insert_count;
        return rc;
}

#ifdef EFX_USE_PIO

struct efx_short_copy_buffer {
        int used;
        u8 buf[L1_CACHE_BYTES];
};

/* Copy to PIO, respecting that writes to PIO buffers must be dword aligned.
 * Advances piobuf pointer. Leaves additional data in the copy buffer.
 */
static void efx_memcpy_toio_aligned(struct efx_nic *efx, u8 __iomem **piobuf,
                                    u8 *data, int len,
                                    struct efx_short_copy_buffer *copy_buf)
{
        int block_len = len & ~(sizeof(copy_buf->buf) - 1);

        __iowrite64_copy(*piobuf, data, block_len >> 3);
        *piobuf += block_len;
        len -= block_len;

        if (len) {
                data += block_len;
                BUG_ON(copy_buf->used);
                BUG_ON(len > sizeof(copy_buf->buf));
                memcpy(copy_buf->buf, data, len);
                copy_buf->used = len;
        }
}

/* Copy to PIO, respecting dword alignment, popping data from copy buffer first.
 * Advances piobuf pointer. Leaves additional data in the copy buffer.
 */
static void efx_memcpy_toio_aligned_cb(struct efx_nic *efx, u8 __iomem **piobuf,
                                       u8 *data, int len,
                                       struct efx_short_copy_buffer *copy_buf)
{
        if (copy_buf->used) {
                /* if the copy buffer is partially full, fill it up and write */
                int copy_to_buf =
                        min_t(int, sizeof(copy_buf->buf) - copy_buf->used, len);

                memcpy(copy_buf->buf + copy_buf->used, data, copy_to_buf);
                copy_buf->used += copy_to_buf;

                /* if we didn't fill it up then we're done for now */
                if (copy_buf->used < sizeof(copy_buf->buf))
                        return;

                __iowrite64_copy(*piobuf, copy_buf->buf,
                                 sizeof(copy_buf->buf) >> 3);
                *piobuf += sizeof(copy_buf->buf);
                data += copy_to_buf;
                len -= copy_to_buf;
                copy_buf->used = 0;
        }

        efx_memcpy_toio_aligned(efx, piobuf, data, len, copy_buf);
}

static void efx_flush_copy_buffer(struct efx_nic *efx, u8 __iomem *piobuf,
                                  struct efx_short_copy_buffer *copy_buf)
{
        /* if there's anything in it, write the whole buffer, including junk */
        if (copy_buf->used)
                __iowrite64_copy(piobuf, copy_buf->buf,
                                 sizeof(copy_buf->buf) >> 3);
}

/* Traverse skb structure and copy fragments in to PIO buffer.
 * Advances piobuf pointer.
 */
static void efx_skb_copy_bits_to_pio(struct efx_nic *efx, struct sk_buff *skb,
                                     u8 __iomem **piobuf,
                                     struct efx_short_copy_buffer *copy_buf)
{
        int i;

        efx_memcpy_toio_aligned(efx, piobuf, skb->data, skb_headlen(skb),
                                copy_buf);

        for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
                skb_frag_t *f = &skb_shinfo(skb)->frags[i];
                u8 *vaddr;

                vaddr = kmap_atomic(skb_frag_page(f));

                efx_memcpy_toio_aligned_cb(efx, piobuf, vaddr + skb_frag_off(f),
                                           skb_frag_size(f), copy_buf);
                kunmap_atomic(vaddr);
        }

        EFX_WARN_ON_ONCE_PARANOID(skb_shinfo(skb)->frag_list);
}

static int efx_enqueue_skb_pio(struct efx_tx_queue *tx_queue,
                               struct sk_buff *skb)
{
        struct efx_tx_buffer *buffer =
                efx_tx_queue_get_insert_buffer(tx_queue);
        u8 __iomem *piobuf = tx_queue->piobuf;

        /* Copy to PIO buffer. Ensure the writes are padded to the end
         * of a cache line, as this is required for write-combining to be
         * effective on at least x86.
         */

        if (skb_shinfo(skb)->nr_frags) {
                /* The size of the copy buffer will ensure all writes
                 * are the size of a cache line.
                 */
                struct efx_short_copy_buffer copy_buf;

                copy_buf.used = 0;

                efx_skb_copy_bits_to_pio(tx_queue->efx, skb,
                                         &piobuf, &copy_buf);
                efx_flush_copy_buffer(tx_queue->efx, piobuf, &copy_buf);
        } else {
                /* Pad the write to the size of a cache line.
                 * We can do this because we know the skb_shared_info struct is
                 * after the source, and the destination buffer is big enough.
                 */
                BUILD_BUG_ON(L1_CACHE_BYTES >
                             SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
                __iowrite64_copy(tx_queue->piobuf, skb->data,
                                 ALIGN(skb->len, L1_CACHE_BYTES) >> 3);
        }

        buffer->skb = skb;
        buffer->flags = EFX_TX_BUF_SKB | EFX_TX_BUF_OPTION;

        EFX_POPULATE_QWORD_5(buffer->option,
                             ESF_DZ_TX_DESC_IS_OPT, 1,
                             ESF_DZ_TX_OPTION_TYPE, ESE_DZ_TX_OPTION_DESC_PIO,
                             ESF_DZ_TX_PIO_CONT, 0,
                             ESF_DZ_TX_PIO_BYTE_CNT, skb->len,
                             ESF_DZ_TX_PIO_BUF_ADDR,
                             tx_queue->piobuf_offset);
        ++tx_queue->insert_count;
        return 0;
}

/* Decide whether we can use TX PIO, ie. write packet data directly into
 * a buffer on the device.  This can reduce latency at the expense of
 * throughput, so we only do this if both hardware and software TX rings
 * are empty, including all queues for the channel.  This also ensures that
 * only one packet at a time can be using the PIO buffer. If the xmit_more
 * flag is set then we don't use this - there'll be another packet along
 * shortly and we want to hold off the doorbell.
 */
static bool efx_tx_may_pio(struct efx_tx_queue *tx_queue)
{
        struct efx_channel *channel = tx_queue->channel;

        if (!tx_queue->piobuf)
                return false;

        EFX_WARN_ON_ONCE_PARANOID(!channel->efx->type->option_descriptors);

        efx_for_each_channel_tx_queue(tx_queue, channel)
                if (!efx_nic_tx_is_empty(tx_queue, tx_queue->packet_write_count))
                        return false;

        return true;
}
#endif /* EFX_USE_PIO */

/* Send any pending traffic for a channel. xmit_more is shared across all
 * queues for a channel, so we must check all of them.
 */
static void efx_tx_send_pending(struct efx_channel *channel)
{
        struct efx_tx_queue *q;

        efx_for_each_channel_tx_queue(q, channel) {
                if (q->xmit_pending)
                        efx_nic_push_buffers(q);
        }
}

/*
 * Add a socket buffer to a TX queue
 *
 * This maps all fragments of a socket buffer for DMA and adds them to
 * the TX queue.  The queue's insert pointer will be incremented by
 * the number of fragments in the socket buffer.
 *
 * If any DMA mapping fails, any mapped fragments will be unmapped,
 * the queue's insert pointer will be restored to its original value.
 *
 * This function is split out from efx_hard_start_xmit to allow the
 * loopback test to direct packets via specific TX queues.
 *
 * Returns NETDEV_TX_OK.
 * You must hold netif_tx_lock() to call this function.
 */
netdev_tx_t __efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
{
        unsigned int old_insert_count = tx_queue->insert_count;
        bool xmit_more = netdev_xmit_more();
        bool data_mapped = false;
        unsigned int segments;
        unsigned int skb_len;
        int rc;

        skb_len = skb->len;
        segments = skb_is_gso(skb) ? skb_shinfo(skb)->gso_segs : 0;
        if (segments == 1)
                segments = 0; /* Don't use TSO for a single segment. */

        /* Handle TSO first - it's *possible* (although unlikely) that we might
         * be passed a packet to segment that's smaller than the copybreak/PIO
         * size limit.
         */
        if (segments) {
                switch (tx_queue->tso_version) {
                case 1:
                        rc = efx_enqueue_skb_tso(tx_queue, skb, &data_mapped);
                        break;
                case 2:
                        rc = efx_ef10_tx_tso_desc(tx_queue, skb, &data_mapped);
                        break;
                case 0: /* No TSO on this queue, SW fallback needed */
                default:
                        rc = -EINVAL;
                        break;
                }
                if (rc == -EINVAL) {
                        rc = efx_tx_tso_fallback(tx_queue, skb);
                        tx_queue->tso_fallbacks++;
                        if (rc == 0)
                                return 0;
                }
                if (rc)
                        goto err;
#ifdef EFX_USE_PIO
        } else if (skb_len <= efx_piobuf_size && !xmit_more &&
                   efx_tx_may_pio(tx_queue)) {
                /* Use PIO for short packets with an empty queue. */
                if (efx_enqueue_skb_pio(tx_queue, skb))
                        goto err;
                tx_queue->pio_packets++;
                data_mapped = true;
#endif
        } else if (skb->data_len && skb_len <= EFX_TX_CB_SIZE) {
                /* Pad short packets or coalesce short fragmented packets. */
                if (efx_enqueue_skb_copy(tx_queue, skb))
                        goto err;
                tx_queue->cb_packets++;
                data_mapped = true;
        }

        /* Map for DMA and create descriptors if we haven't done so already. */
        if (!data_mapped && (efx_tx_map_data(tx_queue, skb, segments)))
                goto err;

        efx_tx_maybe_stop_queue(tx_queue);

        tx_queue->xmit_pending = true;

        /* Pass off to hardware */
        if (__netdev_tx_sent_queue(tx_queue->core_txq, skb_len, xmit_more))
                efx_tx_send_pending(tx_queue->channel);

        if (segments) {
                tx_queue->tso_bursts++;
                tx_queue->tso_packets += segments;
                tx_queue->tx_packets  += segments;
        } else {
                tx_queue->tx_packets++;
        }

        return NETDEV_TX_OK;


err:
        efx_enqueue_unwind(tx_queue, old_insert_count);
        dev_kfree_skb_any(skb);

        /* If we're not expecting another transmit and we had something to push
         * on this queue or a partner queue then we need to push here to get the
         * previous packets out.
         */
        if (!xmit_more)
                efx_tx_send_pending(tx_queue->channel);

        return NETDEV_TX_OK;
}

/* Transmit a packet from an XDP buffer
 *
 * Returns number of packets sent on success, error code otherwise.
 * Runs in NAPI context, either in our poll (for XDP TX) or a different NIC
 * (for XDP redirect).
 */
int efx_xdp_tx_buffers(struct efx_nic *efx, int n, struct xdp_frame **xdpfs,
                       bool flush)
{
        struct efx_tx_buffer *tx_buffer;
        struct efx_tx_queue *tx_queue;
        struct xdp_frame *xdpf;
        dma_addr_t dma_addr;
        unsigned int len;
        int space;
        int cpu;
        int i = 0;

        if (unlikely(n && !xdpfs))
                return -EINVAL;
        if (unlikely(!n))
                return 0;

        cpu = raw_smp_processor_id();
        if (unlikely(cpu >= efx->xdp_tx_queue_count))
                return -EINVAL;

        tx_queue = efx->xdp_tx_queues[cpu];
        if (unlikely(!tx_queue))
                return -EINVAL;

        if (efx->xdp_txq_queues_mode != EFX_XDP_TX_QUEUES_DEDICATED)
                HARD_TX_LOCK(efx->net_dev, tx_queue->core_txq, cpu);

        /* If we're borrowing net stack queues we have to handle stop-restart
         * or we might block the queue and it will be considered as frozen
         */
        if (efx->xdp_txq_queues_mode == EFX_XDP_TX_QUEUES_BORROWED) {
                if (netif_tx_queue_stopped(tx_queue->core_txq))
                        goto unlock;
                efx_tx_maybe_stop_queue(tx_queue);
        }

        /* Check for available space. We should never need multiple
         * descriptors per frame.
         */
        space = efx->txq_entries +
                tx_queue->read_count - tx_queue->insert_count;

        for (i = 0; i < n; i++) {
                xdpf = xdpfs[i];

                if (i >= space)
                        break;

                /* We'll want a descriptor for this tx. */
                prefetchw(__efx_tx_queue_get_insert_buffer(tx_queue));

                len = xdpf->len;

                /* Map for DMA. */
                dma_addr = dma_map_single(&efx->pci_dev->dev,
                                          xdpf->data, len,
                                          DMA_TO_DEVICE);
                if (dma_mapping_error(&efx->pci_dev->dev, dma_addr))
                        break;

                /*  Create descriptor and set up for unmapping DMA. */
                tx_buffer = efx_tx_map_chunk(tx_queue, dma_addr, len);
                tx_buffer->xdpf = xdpf;
                tx_buffer->flags = EFX_TX_BUF_XDP |
                                   EFX_TX_BUF_MAP_SINGLE;
                tx_buffer->dma_offset = 0;
                tx_buffer->unmap_len = len;
                tx_queue->tx_packets++;
        }

        /* Pass mapped frames to hardware. */
        if (flush && i > 0)
                efx_nic_push_buffers(tx_queue);

unlock:
        if (efx->xdp_txq_queues_mode != EFX_XDP_TX_QUEUES_DEDICATED)
                HARD_TX_UNLOCK(efx->net_dev, tx_queue->core_txq);

        return i == 0 ? -EIO : i;
}

/* Initiate a packet transmission.  We use one channel per CPU
 * (sharing when we have more CPUs than channels).
 *
 * Context: non-blocking.
 * Should always return NETDEV_TX_OK and consume the skb.
 */
netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb,
                                struct net_device *net_dev)
{
        struct efx_nic *efx = netdev_priv(net_dev);
        struct efx_tx_queue *tx_queue;
        unsigned index, type;

        EFX_WARN_ON_PARANOID(!netif_device_present(net_dev));

        index = skb_get_queue_mapping(skb);
        type = efx_tx_csum_type_skb(skb);
        if (index >= efx->n_tx_channels) {
                index -= efx->n_tx_channels;
                type |= EFX_TXQ_TYPE_HIGHPRI;
        }

        /* PTP "event" packet */
        if (unlikely(efx_xmit_with_hwtstamp(skb)) &&
            unlikely(efx_ptp_is_ptp_tx(efx, skb))) {
                /* There may be existing transmits on the channel that are
                 * waiting for this packet to trigger the doorbell write.
                 * We need to send the packets at this point.
                 */
                efx_tx_send_pending(efx_get_tx_channel(efx, index));
                return efx_ptp_tx(efx, skb);
        }

        tx_queue = efx_get_tx_queue(efx, index, type);
        if (WARN_ON_ONCE(!tx_queue)) {
                /* We don't have a TXQ of the right type.
                 * This should never happen, as we don't advertise offload
                 * features unless we can support them.
                 */
                dev_kfree_skb_any(skb);
                /* If we're not expecting another transmit and we had something to push
                 * on this queue or a partner queue then we need to push here to get the
                 * previous packets out.
                 */
                if (!netdev_xmit_more())
                        efx_tx_send_pending(tx_queue->channel);
                return NETDEV_TX_OK;
        }

        return __efx_enqueue_skb(tx_queue, skb);
}

void efx_xmit_done_single(struct efx_tx_queue *tx_queue)
{
        unsigned int pkts_compl = 0, bytes_compl = 0;
        unsigned int read_ptr;
        bool finished = false;

        read_ptr = tx_queue->read_count & tx_queue->ptr_mask;

        while (!finished) {
                struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr];

                if (!efx_tx_buffer_in_use(buffer)) {
                        struct efx_nic *efx = tx_queue->efx;

                        netif_err(efx, hw, efx->net_dev,
                                  "TX queue %d spurious single TX completion\n",
                                  tx_queue->queue);
                        efx_schedule_reset(efx, RESET_TYPE_TX_SKIP);
                        return;
                }

                /* Need to check the flag before dequeueing. */
                if (buffer->flags & EFX_TX_BUF_SKB)
                        finished = true;
                efx_dequeue_buffer(tx_queue, buffer, &pkts_compl, &bytes_compl);

                ++tx_queue->read_count;
                read_ptr = tx_queue->read_count & tx_queue->ptr_mask;
        }

        tx_queue->pkts_compl += pkts_compl;
        tx_queue->bytes_compl += bytes_compl;

        EFX_WARN_ON_PARANOID(pkts_compl != 1);

        efx_xmit_done_check_empty(tx_queue);
}

void efx_init_tx_queue_core_txq(struct efx_tx_queue *tx_queue)
{
        struct efx_nic *efx = tx_queue->efx;

        /* Must be inverse of queue lookup in efx_hard_start_xmit() */
        tx_queue->core_txq =
                netdev_get_tx_queue(efx->net_dev,
                                    tx_queue->channel->channel +
                                    ((tx_queue->type & EFX_TXQ_TYPE_HIGHPRI) ?
                                     efx->n_tx_channels : 0));
}

int efx_setup_tc(struct net_device *net_dev, enum tc_setup_type type,
                 void *type_data)
{
        struct efx_nic *efx = netdev_priv(net_dev);
        struct tc_mqprio_qopt *mqprio = type_data;
        unsigned tc, num_tc;

        if (type != TC_SETUP_QDISC_MQPRIO)
                return -EOPNOTSUPP;

        /* Only Siena supported highpri queues */
        if (efx_nic_rev(efx) > EFX_REV_SIENA_A0)
                return -EOPNOTSUPP;

        num_tc = mqprio->num_tc;

        if (num_tc > EFX_MAX_TX_TC)
                return -EINVAL;

        mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;

        if (num_tc == net_dev->num_tc)
                return 0;

        for (tc = 0; tc < num_tc; tc++) {
                net_dev->tc_to_txq[tc].offset = tc * efx->n_tx_channels;
                net_dev->tc_to_txq[tc].count = efx->n_tx_channels;
        }

        net_dev->num_tc = num_tc;

        return netif_set_real_num_tx_queues(net_dev,
                                            max_t(int, num_tc, 1) *
                                            efx->n_tx_channels);
}